Advancing Metal-Organic Framework-Based Composites for Effective Chemical Warfare Agent Detoxification under Real-World Conditions

Threats from toxic chemical warfare agents (CWAs) persist due to war and terrorist attacks, endangering both human beings and the environment. Metal-organic frameworks (MOFs), which feature ordered pore structures and excellent tunability at both metal/metal cluster nodes and organic linkers, are regarded as the best candidates to directly remove CWAs and their simulants via both physical adsorption and chemically catalyzed hydrolysis or oxidization. MOFs have attracted significant attention in the last two decades that has resulted from the rapid development of MOF-based materials in both fundamental research and real-world applications. In this review, the authors focus on the recent advancements in designing and constructing functional MOF-based materials toward CWAs detoxification and discuss how to bridge the gap between fundamental science and real-world applications. With detailed summaries from different points of view, this review provides insights into design rules for developing next-generation MOF-based materials for protection from both organophosphorus and organosulfur CWAs to mitigate potential threats from CWAs used in wars and terrorism attacks.

Sequential Energy and Electron Transfer in Metal-Organic Frameworks

This study presents the design and characterization of a triad metal-organic framework (MOF) system composed of pyrene, porphyrin, and phenyl-C61-butyric acid (PCBA) for efficient energy and electron transfer processes mimicking natural photosynthesis. The triad MOF, synthesized through a mixed-ligand approach followed by postsynthetic modification, demonstrates sequential energy transfer from pyrene to porphyrin, followed by electron transfer to the PCBA acceptor. Time-resolved photoluminescence (TRPL) spectroscopy was employed to investigate the dynamics of energy and charge transfer, revealing fast interligand energy transfer and subsequent charge separation in the MOF structure. The PCBA-functionalized MOF (PCBA@nMLM) exhibited a significantly enhanced photocatalytic performance compared to the nonfunctionalized counterpart, particularly in the selective aerobic oxidation of sulfides to sulfoxides under visible light irradiation. The enhanced photocatalytic activity is attributed to the prolonged charge separation facilitated by the PCBA moieties, as confirmed by electrochemical impedance spectroscopy (EIS) and transient photocurrent measurements. This work highlights the potential of MOF-based systems in artificial photosynthesis and other photocatalytic applications by effectively harnessing solar energy through optimized energy and charge transfer mechanisms.

Se-Rich Multinuclear Er-Containing Dawson-type Poly(selenotungstate)

A multinuclear Er-containing Dawson-type poly(selenotungstate) (poly(ST)) [H2N(CH3)2]12Na8Cs6H26 [Er12Se14W12O72(H2O)6(Se2W14O52)6]·78H2O (1) was made by the one-pot assembly with an excess SeO32- source in the reaction system. The polyoxoanion consists of an extremely rare Er12Se14W12O72(H2O)6 ({Er12Se14W12}) cluster core surrounded by six tetravacant Dawson-type Se2W14O52 ({Se2W14}) fragments, representing the most Se-containing Dawson-type structure so far. Notably, the {Er12Se14W12} cluster exhibits an interesting trefoil-shaped configuration, formed by the condensation of a central Er3Se2O6 ({Er3Se2}) cage with three Er3Se4W4O22(H2O)2 ({Er3Se4W4}) clusters. The catalytic performance of 1 was evaluated by the oxidative decontamination of 2-chloroethyl ethyl sulfide (CEES) into nontoxic 2-chloroethyl ethyl sulfoxide (CEESO), showing remarkable conversion and selectivity, as well as excellent reusability.

Interface-regulated S-type core-shell PCN-224@TiO2 heterojunction for visible-light-driven generation of singlet oxygen for selective photooxidation of 2-chloroethyl ethyl sulfide

Selective oxidation of sulfur mustard gas (HD) to non-toxic sulfoxide by the visible-light-catalyzed generation of singlet oxygen (1O2) is a promising degradation strategy. Although PCN-224 can absorb visible light, it suffers from rapid electron-hole recombination and low redox capacity, which limits the performance of HD degradation. Titanium dioxide (TiO2) is an excellent photocatalyst but it lacks visible-light-activity in degrading HD. In this study, PCN-224@TiO2 heterojunction with S-type core-shell structure was synthesized by in-situ growth method to prolong the visible light absorption capacity of TiO2 and inhibit the rapid recombination of PCN-224. The interface formation and internal electric field were optimized by adjusting the Zr/Ti ratio to enhance the charge transfer, redox capacity, electron-hole separation, and visible light absorption. In this study, the formation of heterojunction composites based on Zr-O-Ti linkages is demonstrated by a series of characterization methods. It is demonstrated by experiments and theoretical calculations that PCN-224@TiO2 can generate nearly 100 % 1O2 under visible light conditions without a sacrificial agent, resulting in efficient and selective oxidation of 2-chloroethyl ethyl sulfide (CEES), a simulant of HD, to non-toxic sulfoxide form.

Design and Advanced Manufacturing of NU-1000 Metal-Organic Frameworks with Future Perspectives for Environmental and Renewable Energy Applications

Metal-organic frameworks (MOFs) represent a relatively new family of materials that attract lots of attention thanks to their unique features such as hierarchical porosity, active metal centers, versatility of linkers/metal nodes, and large surface area. Among the extended list of MOFs, Zr-based-MOFs demonstrate comparably superior chemical and thermal stabilities, making them ideal candidates for energy and environmental applications. As a Zr-MOF, NU-1000 is first synthesized at Northwestern University. A comprehensive review of various approaches to the synthesis of NU-1000 MOFs for obtaining unique surface properties (e.g., diverse surface morphologies, large surface area, and particular pore size distribution) and their applications in the catalysis (electro-, and photo-catalysis), CO2 reduction, batteries, hydrogen storage, gas storage/separation, and other environmental fields are presented. The review further outlines the current challenges in the development of NU-1000 MOFs and their derivatives in practical applications, revealing areas for future investigation.

Single-Chain Conjugated Polymer Guests Confined inside Metal-Organic Frameworks (MOFs): Boosting the Detection and Degradation of a Sulfur Mustard Simulant

Real-time detection and effective degradation of toxic gases have attracted considerable attention in environmental monitoring and human health. Here, we demonstrate a solvent-assisted dynamic assembly strategy to strongly enhance the detection and degradation performance for 2-chloroethyl ethyl sulfide (CEES, as a sulfur mustard simulant) via confinement of a conjugated polymer in metal-organic frameworks (MOFs). The conjugated polymer poly(9,9-di-n-octylfluorene-altbenzothiadiazole) (F8BT) is infiltrated into one-dimensional nanochannels of the Zr-based topological MOF NU-1000 in a single-chain manner, which is caused by the nanoconfinement effect and the steric hindrance between 9,9-dioctylfluorene units and benzothiadiazole units. The obtained F8BT⊂NU-1000 composites provide a high specific surface area and abundant active sites. Based on the cooperative effect of F8BT and NU-1000, rapid and sensitive detection of CEES has been achieved. Moreover, the F8BT⊂NU-1000 composites can selectively oxidize CEES into 2-chloroethyl ethyl sulfoxide (CEESO) under mild photooxidation conditions. Overall, this study opens a new avenue for the fabrication of conjugated polymer/MOF hybrid materials that show great potential for the sensitive detection and effective removal of hazardous chemicals.

A zinc-containing porphyrin aluminum MOF in sorption of diethyl sulfide vapor: mechanistic experimental and computational study

We report a mechanistic study of the interactions in the sorption of volatile organic sulfur compound (VOSC) diethyl sulfide (DES) by zinc porphyrin aluminum MOF (actAl-MOF-TCPPZn) compound 3. First, interactions were studied under dynamic conditions with the vapor of DES in flowing air, using in situ time-dependent ATR-FTIR spectroscopy in a controlled atmosphere with a new facile spectroscopic mini-chamber. The first binding site includes μ(O-H) and COO- groups as detected by characteristic peak shifts. Control experiments with a model compound, which lacks porosity and these groups, show no peak shifts. An additional insight was obtained by DFT computations using small clusters. The kinetics of sorption of DES by compound 3 is of the Langmuir adsorption model and pseudo-first order with rate constant robs = 0.442 ± 0.056 min-1. Sorption of DES under static conditions in saturated vapor results in stoichiometric adsorption complex [Al-MOF-TCPPZn]1(DES)4 characterized by spectroscopic, structural and gravimetric methods; the adsorbed amount is very high (381 mg g-1 sorbent). The repetitive sorption and desorption of DES are conducted, with facile regeneration. Finally, the mechanistic details were determined by Raman and photoluminescence (PL) spectroscopy using a confocal Raman microscope. Photoexcitation of compound 3 at 405 nm into the Soret band of the metalloporphyrin linker shows the characteristic PL peaks of Q-bands: the purely electronic Q(0-0) and first vibronic Q(0-1) bands. Upon interaction with DES, preferential quenching of PL from the Q(0-0) band occurs with a significant increase of the signal of the vibronic Q(0-1) band, reflecting bonding to the metalloporphyrin ring. Compound 3 is of interest to mechanistic studies of VOSCs, their removal from air, and optical chemo-sensing.

Interaction of a Porphyrin Aluminum Metal-Organic Framework with Volatile Organic Sulfur Compound Diethyl Sulfide Studied via In Situ and Ex Situ Experiments and DFT Computations

The study presents complementary experiments and quantum chemical DFT computations to reveal the molecular-level interactions of an advanced nanomaterial, porphyrin aluminum metal-organic framework (compound 2), with the volatile organic sulfur compound diethyl sulfide (DES). First, the intermolecular host-guest interactions during the sorption of DES were explored under dynamic conditions, using the vapor of DES in flowing air. The in situ time-dependent ATR-FTIR spectroscopy in a controlled atmosphere was significantly improved though the use of a new facilely built spectroscopic mini-chamber. The binding site of DES in compound 2 involves the μ(O-H) and COO- groups of the linker of the sorbent. Further, the chemical kinetics of the sorption of DES was investigated, and it follows the Langmuir adsorption kinetic model. That is, depending on the time interval, the process obeys either the pseudo-first- or pseudo-second-order rate law. For the Langmuir adsorption of the pseudo-first order, the rate constant is robs = 0.165 ± 0.017 min-1. Next, the interaction of compound 2 with the saturated vapor of DES yields the adsorption complex compound 3 [Al-MOF-TCPPH2]2(DES)7. The adsorbed amount of DES is very large at 36.5 wt.% or 365 mg/g sorbent, one of the highest values reported on any sorbent. The molecular modes of bonding of DES in the complex were investigated through quantum chemical DFT computations. The adsorption complex was facilely regenerated by gentle heating. The advanced functional material in this work has significant potential in the environmental remediation of diethyl sulfide and related volatile organic sulfur compounds in air, and it is an interesting target of mechanistic studies of sorption.

The Effect of Linker-to-Metal Energy Transfer on the Photooxidation Performance of an Isostructural Series of Pyrene-Based Rare-Earth Metal-Organic Frameworks

The tetratopic linker, 1,3,6,8-tetrakis(p-benzoic acid)pyrene (H4 TBAPy) along with rare-earth (RE) ions is used for the synthesis of 9 isostructures of a metal-organic framework (MOF) with shp topology, named RE-CU-10 (RE = Y(III), Gd(III), Tb(III), Dy(III), Ho(III), Er(III), Tm(III), Yb(III), and Lu(III)). The synthesis of each RE-CU-10 analogue requires different reaction conditions to achieve phase pure products. Single crystal X-ray diffraction indicates the presence of a RE9 -cluster in Y- to Tm-CU-10, while a RE11 -cluster is observed for Yb- and Lu-CU-10. The photooxidation performance of RE-CU-10 analogues is evaluated, observing competition between linker-to-metal energy transfer versus the generation of singlet oxygen. The singlet oxygen produced is used to detoxify a mustard gas simulant 2-chloroethylethyl sulfide, with half-lives ranging from 4.0 to 5.8 min, some of the fastest reported to date using UV-irradiation and < 1 mol% catalyst, in methanol under O2 saturation.

Ultrafast Photocatalytic Detoxification of Mustard Gas Simulants by a Mesoporous Metal-Organic Framework with Dangling Porphyrin Molecules

Developing effective catalysts to degrade chemical warfare agents is of great significance. Herein, a mesoporous MIL-101(Cr) composite material dangled with porphyrin molecules (denote as TCPP@MIL-101(Cr), TCPP = tetra(4-carboxyphenyl)porphyrin) is reported, which can be used as a heterogeneous photocatalyst for detoxification of mustard gas simulants 2-chloroethyl ethyl sulfide (CEES) to 2-chloroethyl ethyl sulfoxide (CEESO) with a half-life of 1 min. The catalytic performance of TCPP@MIL-101(Cr) is comparable to that of homogeneous molecular porphyrin. Mechanistic studies reveal that both 1 O2 and O2 •- are efficiently generated and play vital roles in the oxidation reaction. Gold nanoparticles (AuNPs) are attached to the TCPP@MIL-101(Cr) to further enhance the catalytic activity with a benchmark half-life of 45 s, which is the fastest record so far. A medical mask loaded TCPP@MIL-101(Cr) is fabricated for practical applications, which can selectively photoxidize CEES to CEESO under sunlight and air atmosphere, exhibiting the best degradation performance among the reported fabric-like composite materials.

Tunable Photocatalytic Singlet Oxygen Generation by Metal-Organic Frameworks via Functionalization of Pyrene-Containing Linkers

Metal-organic frameworks (MOFs) are highly versatile materials that have shown great promise in chemical warfare agent (CWA) adsorption and decontamination. Sulfur mustard has been one of the most prominently used CWAs over the last century; therefore, the development of effective detoxification strategies is of utmost importance. However, typical routes of detoxification are slow and/or result in the production of harmful byproducts. NU-1000 has previously shown promise as a "soft" oxidizer that can readily detoxify sulfur mustard and its simulant 2-chloroethyl ethyl sulfide (2-CEES) through the generation of singlet oxygen in the presence of either UV (396 nm) or blue (465 nm) light. Several variants of NU-1000 were synthesized (MOF-R, R = -Cl, -NO2, -CH3) with functional groups positioned either ortho or meta to the carboxylic acid on the linker. NU-1000-o-(Cl)4 and NU-1000-m-(Cl)4 showed significant enhancement of photooxidation of 2-CEES due to spin-orbit coupling, enhancing the intersystem crossing into the MOF triplet (T1) state. Furthermore, substitution of MOF linkers led to pyrene-phenyl rotation. Linkers with substituents in the ortho-position were shown to have smaller pyrene-phenyl torsion angles, leading to enhanced conjugation between the rings and a subsequent red shift in the absorption spectra. This red shift leads to enhanced reactivity of NU-1000-o-(Cl)4 under blue light conditions and gives perspective on making materials with enhanced reactivity utilizing visible light.

Advances in Metal-Organic Frameworks for the Removal of Chemical Warfare Agents: Insights into Hydrolysis and Oxidation Reaction Mechanisms

The destruction of chemical warfare agents (CWAs) is a crucial area of research due to the ongoing evolution of toxic chemicals. Metal-organic frameworks (MOFs), a class of porous crystalline solids, have emerged as promising materials for this purpose. Their remarkable porosity and large surface areas enable superior adsorption, reactivity, and catalytic abilities, making them ideal for capturing and decomposing target species. Moreover, the tunable networks of MOFs allow customization of their chemical functionalities, making them practicable in personal protective equipment and adjustable to dynamic environments. This review paper focuses on experimental and computational studies investigating the removal of CWAs by MOFs, specifically emphasizing the removal of nerve agents (GB, GD, and VX) via hydrolysis and sulfur mustard (HD) via selective photooxidation. Among the different MOFs, zirconium-based MOFs exhibit extraordinary structural stability and reusability, rendering them the most promising materials for the hydrolytic and photooxidative degradation of CWAs. Accordingly, this work primarily concentrates on exploring the intrinsic catalytic reaction mechanisms in Zr-MOFs through first-principles approximations, as well as the design of efficient degradation strategies in the aqueous and solid phases through the establishment of Zr-MOF structure-property relationships. Recent progress in the tuning and functionalization of MOFs is also examined, aiming to enhance practical CWA removal under realistic battlefield conditions. By providing a comprehensive overview of experimental findings and computational insights, this review paper contributes to the advancement of MOF-based strategies for the destruction of CWAs and highlights the potential of these materials to address the challenges associated with chemical warfare.

Chiral covalent organic framework-based open tubular capillary electrochromatography column for enantioseparation of selected amino acids and pesticides

A novel chiral covalent organic framework (CCOF) was synthesized with an imine covalent organic framework TpBD (synthesized via Schiff-base reaction between phloroglucinol (Tp) and benzidine (BD)) modified using (1S)-(+)-10-camphorsulfonyl chloride as chiral ligand by chemical bonding method for the first time, and was characterized by X-ray diffraction, Fourier-transform infrared spectra, X-ray photoelectron spectroscopy, nitrogen adsorption/desorption, thermogravimetry analysis, and zeta-potential. The results revealed that the CCOF had good crystallinity, high specific surface area and good thermal stability. Then, the CCOF was employed as stationary phase in open-tubular capillary electrochromatography (OT-CEC) column (the CCOF-bonded OT-CEC column) for enantioseparation of 21 single chiral compounds (12 natural amino acids including acidic, neutral and basic, 9 pesticides including herbicides, insecticides and fungicides) and simultaneous enantioseparation of mixture amino acids and pesticides with similar structures or properties. Under the optimized CEC conditions, all the analytes reached the baseline separation with high resolutions of 1.67-25.93 and selectivity factors of 1.06-3.49 in 8 min. Finally, the reproducibility and stability of the CCOF-bonded OT-CEC column were measured. Relative standard deviations (RSDs) of retention time and separation efficiency were 0.58-4.57% and 1.85-4.98%, and not obviously changed after 150 runs. These results demonstrate that COFs-modified OT-CEC explore a promising method to separate chiral compounds.

Porphyrin-Moiety-Functionalized Metal-Organic Layers Exhibiting Catalytic Capabilities for Detoxifying Nerve Agent and Blister Agent Simulants

The development of very efficient bifunctional catalysts for the simultaneous detoxification of two kinds of the deadliest chemical warfare agents (CWAs), nerve agent and blister agent, is highly desirable. In this study, two porphyrin-based ligands [tetrakis(4-carboxyphenyl) porphyrin (TCPP) and protoporphyrin IX (PPIX)] are introduced into 2D Zr-1,3,5-tris(4-carboxyphenyl)benzene (BTB) metal-organic layers (MOLs), composed of six-connected Zr₆ nodes and the tritopic carboxylate ligand BTB, by a solvent-assisted ligand incorporation method. The loads of TCPP and PPIX are 6.4 and 10.9 wt %, respectively. The detoxification of simulants of the nerve agent and the blister agent was conducted to investigate the catalytic activity of porphyrin-moiety-functionalized MOLs. The reaction half-life of optimal TCPP-functionalized MOL catalyzing the hydrolysis of a nerve agent simulant is only 2.8 min, meanwhile, the half-life of the selective catalytic oxidation of a blister agent simulant is only 1.2 min under LED illumination. More importantly, such a degradation half-life is only about 4 min under natural sunlight (∼60 mW/cm²). To our knowledge, TCPP-functionalized MOL is by far the most efficient catalyst for blister agent simulant degradation under solar light. Therefore, 2D ultrathin MOLs on demand appear to be a promising and efficient material platform for the development of bifunctional catalysts for CWA protection.

Dual-Function Detoxifying Nanofabrics against Nerve Agent and Blistering Agent Simulants

The development of functional materials that can detoxify multiple chemical warfare agents (CWAs) at the same time is of great significance to cope with the uncertainty of CWA use in real-world situations. Although many catalysts capable of detoxifying CWAs have been reported, there is still a lack of effective means to integrate these catalytic-active materials on practical fibers/fabrics to achieve effective protection against coexistence of a variety of CWAs. In this work, by a combination of electrospinning and in situ solvothermal reaction, PAN@Zr(OH)₄@MOF-808 nanofiber membranes were prepared for detoxification of both nerve agent and blistering agent simulants dimethyl 4-nitrophenyl phosphate (DMNP) and 2-chloroethyl ethyl sulfide (CEES). Under the catalytic effect of the MOF-808 component, DMNP hydrolysis with a half-life as short as 1.19 min was achieved. Meanwhile, an 89.3% CEES removal rate was obtained within 12 h by adsorption and catalysis of MOF-808 and Zr(OH)₄ components at ambient conditions, respectively. PAN@Zr(OH)₄@MOF-808 nanofiber membranes also showed a superior blocking effect on CEES compared to bare PAN and PAN@Zr(OH)₄ nanofiber membranes. Simultaneous protection against DMNP and CEES showed effective inhibition of both simulants for at least 2 h. The preparation method also imparted intrinsically good interfacial adhesion between the components, contributing to the excellent recycling stability of PAN@Zr(OH)₄@MOF-808 nanofiber membranes. Therefore, the prepared composite nanofabrics have great application potential, which provides a new idea for the construction of broad-spectrum protective detoxification materials.

Efficient Decontamination of HD by an Electrophilic Iodine/Carboxylate Composite as an Active Sorbent

The development of new and efficient decontamination methods has become more relevant in recent years, especially with regard to solid-based decontamination and detoxification systems. The majority of powders used today are dealing with the physical adsorption of chemical warfare agents (CWAs) and their removal from sites without actively destroying them. In this work, we have designed and developed an active solid composite matrix combining organic carboxylate salts and N-iodosuccinimide (NIS) for HD decontamination via oxidation. All the reactions and mechanistic studies for the sorption and degradation of CWAs were conducted using direct polarization and cross polarization solid-state magic-angle spinning nuclear magnetic resonance techniques. Performance toward the sorption and detoxification of HD was tested, exhibiting oxidation within minutes in a mild and selective manner to the nontoxic sulfoxide derivative followed by visible formation of iodine. The results indicate that carboxylate moieties in the matrix are important for stabilizing the positively charged sulfonium ion intermediate and for supplying oxygen for hydrolysis in a water-deficient environment. The NaOBz/NIS composite was shown to be the most efficient in sorbing and converting the water-insoluble agent HD to its nontoxic, water-soluble sulfoxide, which could then be removed from the site with mere water, resulting in less environmental damage and quick remediation.

Donor-Acceptor Hybrid Heterostructures: An Emerging Class of Photoactive Materials with Inorganic and Organic Semiconductive Components

Just as the heterojunctions in physics, donor-acceptor (D-A) heterostructures are an emerging class of photoactive materials fabricated from two semiconductive components at the molecular level. Among them, D-A hybrid heterostructures from organic and inorganic semiconductive components have attracted extensive attention in the past decades due to their combined advantages of high stability for the inorganic semiconductors and modifiability for the organic semiconductors, which are particularly beneficial to efficiently achieve photoinduced charge separation and transfer upon irradiations. In this review, by analogy with the heterojunctions in physics, a definition of the D-A heterostructures and their general design and synthetic strategies are given. Meanwhile, the D-A hybrid heterostructures are focused on and their recent advances in potential applications of photochromism, photomodulated luminescence, and photocatalysis summarized.

One-pot synthesis of a novel chiral Zr-based metal-organic framework for capillary electrochromatographic enantioseparation

A novel chiral stationary phase (CSP) of Zr-based metal-organic framework, l-Cys-PCN-224, was prepared by one-pot method and applied for the enantioseparation by capillary electrochromatography. The CSP was characterized by X-ray diffraction, thermogravimetric analysis, X-ray photoelectron spectroscopy, Fourier-transform infrared spectra, nitrogen adsorption/desorption, circular dichroism spectrum, zeta-potential, and so on. The results revealed that the CSP had good crystallinity, high specific surface area (2580 m² /g), and good thermal stability. Meanwhile, the cross-section of l-Cys-PCN-224-bonded open-tubular (OT) column was observed by a scanning electron microscope, which proved the successful bonding of l-Cys-PCN-224 particles to the inner wall. Relative standard deviations of the column efficiencies were 3.87%-9.14%, and not obviously changed after 200 runs, which indicated that l-Cys-PCN-224-bonded OT column had the better stability and reproducibility. Excellent chiral separation performance was verified with nine kinds of natural amino acids including acidic, neutral, and basic as the analytes. All amino acids studied achieved good separation with the resolution of 1.38-13.9 and selector factor of 1.11-3.71. These results demonstrated that the CSP had an excellent potential in the chiral separation field.

Use of porphyrin-containing polymers of intrinsic microporosity as selective photocatalysts for oxidative detoxification of chemical warfare agent simulant

Porphyrin-based polymers of intrinsic microporosity (PIMs) in photocatalytic degradation of a mustard-gas simulant (2-chloroethyl ethyl sulfide (2-CEES)) was demonstrated. Under blue-ultraviolet (UV) light-emitting diode (LED) irradiation, porphyrin-based PIMs PP-H2 and PP-Zn(II) worked as effective heterogeneous photocatalysts for oxidation of 2-CEES. Solvent played an important role in the conversion and selectivity of 2-CEES oxidation. When AcCN was used as a solvent, PP-H2and PP-Zn(II) demonstrated complete conversion of 2-CEES in 30 and 50 min, respectively, whereas they showed complete conversion at 60 and 70 min, respectively, when MeOH was used as a solvent. Moreover, these PIMs produced 2-chloroethyl ethyl sulfoxide (2-CEESO) as a major product with small amounts of 2-chloroethyl ethyl sulfone (2-CEESO[Formula: see text], ethyl methoxyethyl sulfoxide (EMSO), and vinyl sulfoxide (EVS) as side products in most solvents. However, when MeOH was used as a solvent, highly toxic 2-CEESO2 was not observed as a side product. Furthermore, these PIMs showed no significant changes in photocatalytic activity even after five cycles of reuse, indicating their high stability. Thus, the series of PIMs prepared herein can perform well as heterogeneous catalysts in photooxidation of 2-CEES under blue-UV LED light, with PP-H2 being the most effective oxidation catalyst, leading to fast conversion and high selectivity.

l-Cysteine modified metal-organic framework as a chiral stationary phase for enantioseparation by capillary electrochromatography

A new kind of chiral zirconium based metal-organic framework, l-Cys-PCN-222, was synthesized using l-cysteine (l-Cys) as a chiral modifier by a solvent-assisted ligand incorporation approach and utilized as the chiral stationary phase in the capillary electrochromatography system. l-Cys-PCN-222 was characterized by X-ray diffraction, thermogravimetric analysis, X-ray photoelectron spectroscopy, Fourier-transform infrared spectra, nitrogen adsorption/desorption, circular dichroism spectrum, zeta-potential and so on. The results revealed that l-Cys-PCN-222 had the advantages of good crystallinity, high specific surface area (1818 m2 g-1), thermal stability and chiral recognition performance. Meanwhile, the l-Cys-PCN-222-bonded open-tubular column was prepared using l-Cys-PCN-222 particles as the solid phase by 'thiol-ene' click chemistry reaction and characterized by scanning electron microscopy, which proved the successful bonding of l-Cys-PCN-222 to the column inner wall. Finally, the stability, reproducibility and chiral separation performance of the l-Cys-PCN-222-bonded OT column were measured. Relative standard deviations (RSD) of the column efficiencies for run-to-run, day-to-day, column-to-column and runs were 1.39-6.62%, and did not obviously change after 200 runs. The enantiomeric separation of 17 kinds of chiral compounds including acidic, neutral and basic amino acids, imidazolinone and aryloxyphenoxypropionic pesticides, and fluoroquinolones were achieved in the l-Cys-PCN-222-bonded OT column. These results demonstrated that the chiral separation system of the chiral metal-organic frameworks (CMOFs) coupled with capillary electrochromatography has good application prospects.

Vapor phase catalytic photooxidation of sulfides to sulfoxides: application to the neutralization of sulfur mustard simulants

A visible-light photocatalytic approach was developped for the aerobic oxidation of sulfides into the corresponding sulfoxides, including sulfur mustard simulants. The heterogeneous catalytic system is selective, operates in the gas...

Superoxide Ion and Singlet Oxygen Photogenerated by Metalloporphyrin-Based Metal-Organic Frameworks for Highly Efficient and Selective Photooxidation of a Sulfur Mustard Simulant

The exploration of highly efficient materials for the degradation of chemical warfare agents has been a longstanding task for preventing human exposure. Herein, we report a series of metal-organic frameworks (MOFs) M-TCPP-La based on metallo-tetra(4-carboxyphenyl)porphyrin and La^III, which were applied to selectively oxidize 2-chloroethyl ethyl sulfide (CEES, a sulfur mustard simulant) as heterogeneous photocatalysts. After irradiation from a commercial blue light-emitting diode (LED), both superoxide ion and singlet oxygen were generated by M-TCPP-La and involved in selective oxidization of CEES to 2-chloroethyl ethyl sulfoxide (CEESO). Notably, a very short half lifetime (2.5 min) was achieved using Fe-TCPP-La as the photocatalyst. In comparison to currently utilizing singlet oxygen and hydrogen peroxide as oxidizing agents, this work employing both singlet oxygen and superoxide ion represents a new and effective strategy of detoxification of mustard gas.

Pyrene-based metal organic frameworks: from synthesis to applications

Pyrene is one of the most widely investigated aromatic hydrocarbons given to its unique optical and electronic properties. Hence, pyrene-based ligands have been attractive for the synthesis of metal-organic frameworks (MOFs) in the last few years. In this review, we will focus on the most important characteristics of pyrene, in addition to the development and synthesis of pyrene-based molecules as bridging ligands to be used in MOF structures. We will summarize the synthesis attempts, as well as the post-synthetic modifications of pyrene-based MOFs by the incorporation of metals or ligands in the structure. The discussion of promising results of such MOFs in several applications; including luminescence, photocatalysis, adsorption and separation, heterogeneous catalysis, electrochemical applications and bio-medical applications will be highlighted. Finally, some insights and future prospects will be given based on the studies discussed in the review. This review will pave the way for the researchers in the field for the design and development of novel pyrene-based structures and their utilization for different applications.

Node-Accessible Zirconium MOFs

High-stability, zirconium-based metal-organic frameworks are attractive as heterogeneous catalysts and as model supports for uniform arrays of subsequently constructed heterogeneous catalysts-for example, MOF-node-grafted metal-oxy and metal-sulfur clusters. For hexa-Zr(IV)-MOFs characterized by nodes that are less than 12-connected, sites not used for linkers are ideally occupied by reactive and displaceable OH/H₂O pairs. The desired pairs are ideal for grafting the aforementioned catalytic clusters, while aqua-ligand lability renders them effective for exposing highly Lewis-acidic Zr(IV) sites (catalytic sites) to candidate reactants. New single-crystal X-ray studies of an eight-connected Zr-MOF, NU-1000, reveal that conventional activation fully removes modulator ligands, but replaces them with three node-blocking formate ligands (from solvent decomposition) and only one OH/H₂O pair, not four-a largely overlooked complication that now appears to be general for Zr-MOFs. Here we describe an alternative activation protocol that effectively removes modulators, avoids formate, and installs the full complement of terminal OH/H₂O pairs. It does so via an unusual isolatable intermediate featuring eight aqua ligands and four non-ligated chlorides-again as supported by single-crystal X-ray data. We find that complete replacement of node-blocking modulators/formate with the originally envisioned OH/OH₂ pairs has striking consequences; here we touch upon just three. First, elimination of unrecognized formate renders aqua ligands much more thermally labile, enabling open Zr(IV) sites to be obtained at lower temperature. Second, in the absence of formate, which otherwise links and locks pairs of node Zr(IV) ions, reversible removal of aqua ligands engenders reversible contraction of MOF meso- and micropores, as evidenced by X-ray diffraction. Third, formate replacement with OH/OH₂ pairs renders NU-1000 ca.10× more active for catalytic hydrolytic degradation of a representative simulant of G-type chemical warfare agents.

Supramolecular Porous Organic Nanocomposites for Heterogeneous Photocatalysis of a Sulfur Mustard Simulant

Efficient heterogeneous photosensitizing materials require both large accessible surface areas and excitons of suitable energies and with well-defined spin structures. Confinement of the tetracationic cyclophane (ExBox⁴⁺ ) within a nonporous anionic polystyrene sulfonate (PSS) matrix leads to a surface area increase of up to 225 m² g^-1 in ExBox•PSS. Efficient intersystem crossing is achieved by combining the spin-orbit coupling associated to Br heavy atoms in 1,3,5,8-tetrabromopyrene (TBP), and the photoinduced electron transfer in a TBP⊂ExBox⁴⁺ supramolecular dyad. The TBP⊂ExBox⁴⁺ complex displays a charge transfer band at 450 nm and an exciplex emission at 520 nm, indicating the formation of new mixed-electronic states. The lowest triplet state (T₁ , 1.89 eV) is localized on the TBP and is close in energy with the charge separated state (CT, 2.14 eV). The homogeneous and heterogeneous photocatalytic activities of the TBP⊂ExBox⁴⁺ , for the elimination of a sulfur mustard simulant, has proved to be significantly more efficient than TBP and ExBox⁺⁴ , confirming the importance of the newly formed excited-state manifold in TBP⊂ExBox⁴⁺ for the population of the low-lying T₁ state. The high stability, facile preparation, and high performance of the TBP⊂ExBox•PSS nanocomposites augur well for the future development of new supramolecular heterogeneous photosensitizers using host-guest chemistry.

Multimodal Characterization of Materials and Decontamination Processes for Chemical Warfare Protection

This Review summarizes the recent progress made in the field of chemical threat reduction by utilizing new in situ analytical techniques and combinations thereof to study multifunctional materials designed for capture and decomposition of nerve gases and their simulants. The emphasis is on the use of in situ experiments that simulate realistic operating conditions (solid-gas interface, ambient pressures and temperatures, time-resolved measurements) and advanced synchrotron methods, such as in situ X-ray absorption and scattering methods, a combination thereof with other complementary measurements (e.g., XPS, Raman, DRIFTS, NMR), and theoretical modeling. The examples presented in this Review range from studies of the adsorption and decomposition of nerve agents and their simulants on Zr-based metal organic frameworks to Nb and Zr-based polyoxometalates and metal (hydro)oxide materials. The approaches employed in these studies ultimately demonstrate how advanced synchrotron-based in situ X-ray absorption spectroscopy and diffraction can be exploited to develop an atomic- level understanding of interfacial binding and reaction of chemical warfare agents, which impacts the development of novel filtration media and other protective materials.

Defectous UiO-66 MOF Nanocomposites as Reactive Media of Superior Protection against Toxic Vapors

The composites of UiO-66 with nanographite or oxidized graphitic carbon nitride nanospheres (∼10 wt %) were synthesized and used as CEES decontamination media from a vapor phase. The materials were characterized using XRD, nitrogen adsorption, SEM, potentiometric titration, FTIR, and thermal analysis. The results showed a marked improvement of the detoxification capability against the vapors of CEES compared to those of pristine UiO-66, either in terms of the amount adsorbed or surface reactivity. The maximum weight uptake for the composites reached 632 mg g^-1, which was higher than that on UiO-66. The improved adsorption and catalytic activity were linked to the new interface between the modifiers and MOF units/defects, which provided additional active sites formed as a result of modifiers' surface groups acting as MOF linkers. The morphology and porosity were also altered, positively affecting the sites' accessibility and their dispersion in the MOF particles. Dehydrohalogenation and oxidation were the predominant pathways of the composites' surface reactivity. The detoxification mechanisms involving CEES vapor-UiO-66 surface interactions differ from those reported for CEES liquid/dissolved liquid-UiO-66 interactions, and dehydrohalogenation, fragmentation, and oxidation predominate.

Metal-Organic Framework- and Polyoxometalate-Based Sorbents for the Uptake and Destruction of Chemical Warfare Agents

The threat of chemical warfare agents (CWAs), assured by their ease of synthesis and effectiveness as a terrorizing weapon, will persist long after the once-tremendous stockpiles in the U.S. and elsewhere are finally destroyed. As such, soldier and civilian protection, battlefield decontamination, and environmental remediation from CWAs remain top national security priorities. New chemical approaches for the fast and complete destruction of CWAs have been an active field of research for many decades, and new technologies have generated immense interest. In particular, our research team and others have shown metal-organic frameworks (MOFs) and polyoxometalates (POMs) to be active for sequestering CWAs and even catalyzing the rapid hydrolysis of agents. In this Forum Article, we highlight recent advancements made in the understanding and evaluation of POMs and Zr-based MOFs as CWA decontamination materials. Specifically, our aim is to bridge the gap between controlled, solution-phase laboratory studies and real-world or battlefield-like conditions by examining agent-material interactions at the gas-solid interface utilizing a multimodal experimental and computational approach. Herein, we report our progress in addressing the following research goals: (1) elucidating molecular-level mechanisms of the adsorption, diffusion, and reaction of CWA and CWA simulants within a series of Zr-based MOFs, such as UiO-66, MOF-808, and NU-1000, and POMs, including Cs₈Nb₆O₁₉ and (Et₂NH₂)₈[(α-PW₁₁O₃₉Zr(μ-OH)(H₂O))₂]·7H₂O, (2) probing the effects that common ambient gases, such as CO₂, SO₂, and NO₂, have on the efficacy of the MOF and POM materials for CWA destruction, and (3) using CWA simulant results to develop hypotheses for live agent chemistry. Key hypotheses are then tested with targeted live agent studies. Overall, our collaborative effort has provided insight into the fundamental aspects of agent-material interactions and revealed strategies for new catalyst development.

PCN-222 metal-organic framework: a selective and highly efficient sorbent for the extraction of aspartame from gum, juice, and diet soft drink before its spectrophotometric determination

In this paper, we describe synthesis and application of an iron porphyrinc metal-organic framework PCN-222(Fe) for solid phase extraction of aspartame, an artificial non-saccharine sweetener, from gum, juice and diet soft drink samples prior to its determination by spectrophotometry. The mesoporous MOF was synthesized solvo-thermally and characterized by Fourier transform-infrared spectroscopy, powder X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller techniques. To obtain the best extraction efficiency of aspartame, significant affecting parameters such as pH of sample solution, amount of the sorbent, type and volume of eluting solvent, and adsorption and desorption times were investigated and optimized. Under optimum conditions, the calibration graph for aspartame was linear in the range of 0.1 to 100.0 mg.L^-1 and relative standard deviation of aspartame was 1.7% (n = 7). Limit of detection of method calculated as 0.019 mg.L^-1 and the enrichment factor of 350 folds was obtained. Adsorption capacity of synthesized sorbent was found to be 356 mg.g^-1. Hierarchical porosity, the eight terminal-OH groups of the Zr₆ node, and hydrogen bonding possibly play vital role for selective adsorption of aspartame. The optimized method was successfully applied to the determination of aspartame in real samples with reasonable recoveries (> 98%).

Self-assembly of polyoxovanadate-capped polyoxoniobates and their catalytic decontamination of sulfur mustard simulants

Two novel polyoxovanadate-capped polyoxoniobates with non-classical structural motifs have been successfully assembled, which are active heterogeneous catalysts for the oxidative detoxification of sulfur mustard simulants.

A versatile and recyclable molecularly imprinted polymer as an oxidative catalyst of sulfur derivatives: a new possible method for mustard gas and V nerve agent decontamination

A molecularly imprinted polymer containing a porphyrin unit was developed as a biomimetic heterogenous catalyst for the oxidation of sulfur derivatives. Its catalytic efficiency under mild conditions and its easy recovery represent a great asset for the design of new decontamination tools for yperite and VX.

Conjugated Microporous Polymers as Heterogeneous Photocatalysts for Efficient Degradation of a Mustard-Gas Simulant

Compared with traditional metal-based photosensitizers, heterogeneous and organic photocatalysts with visible-light activity are more environmentally friendly and sustainable. The simultaneous introduction of electron-rich and electron-deficient units in donor-acceptor typed conjugated microporous polymer (CMP) photocatalysts can significantly enhance their visible-light harvesting and separation efficiency of photogenerated carriers. Here, two carbazole-based CMPs (CzBSe-CMP and CzBQn-CMP) were successfully constructed through a cost-effective process. They show inherent porosity with large Brunauer-Emmett-Teller surface area and excellent thermal and chemical stability. Their photoelectric properties, energy levels, optical band gaps, transient photocurrent response, and photocatalytic activity could be conveniently tailored through tuning the electron-deficient moiety in polymer networks. More importantly, CzBSe-CMP was found to be a superior solid photocatalyst for selective photo-oxidation of mustard gas simulant 2-chloroethyl ethyl sulfide into a nontoxic product by using molecular oxygen as a sustainable oxygen source under visible-light illumination. In addition, the obtained CMP-based photocatalysts also showed excellent recyclability and could be reutilized through adding more simulants or a simple separation procedure. The current contribution provides great application prospects for CMPs as metal-free, solid photocatalysts in organic transformation and environmental protection.

Visible-light harvesting pyrene-based MOFs as efficient ROS generators

The utilization of reactive oxygen species (ROS) in organic transformations is of great interest due to their superior oxidative abilities under mild conditions. Recently, metal-organic frameworks (MOFs) have been developed as photosensitizers to transfer molecular oxygen to ROS for photochemical synthesis. However, visible-light responsive MOFs for oxygen activation remains scarce. Now we design and synthesize two porous MOFs, namely, PCN-822(M) (M = Zr, Hf), which are constructed by a 4,5,9,10-(K-region) substituted pyrene-based ligand, 4,4',4'',4'''-((2,7-di-tert-butylpyrene-4,5,9,10-tetrayl)tetrakis(ethyne-2,1-diyl))-tetrabenzoate (BPETB4-). With the extended π-conjugated pyrene moieties isolated on the struts, the derived MOFs are highly responsive to visible light, possessing a broad-band adsorption from 225-650 nm. As a result, the MOFs can be applied as efficient ROS generators under visible-light irradiation, and the hafnium-based MOF, PCN-822(Hf), can promote the oxidation of amines to imines by activating molecular oxygen via synergistic photo-induced energy and charge transfer.