Surface Electrochemical Modification of a Nickel Substrate to Prepare a NiFe-based Electrode for Water Oxidation

In Situ Transformed CoOOH@Co3S4 Heterostructured Catalyst for Highly Efficient Catalytic OER Application

The deprived electrochemical kinetics of the oxygen evolution reaction (OER) catalyst is the prime bottleneck and remains the major obstacle in the water electrolysis processes. Herein, a facile hydrothermal technique was implemented to form a freestanding polyhedron-like Co3O4 on the microporous architecture of Ni foam, its reaction kinetics enhanced through sulfide counterpart transformation in the presence of Na2S, and their catalytic OER performances comparatively investigated in 1 M KOH medium. The formed Co3S4 catalyst shows outstanding catalytic OER activity at a current density of 100 mA cm-2 by achieving a relatively low overpotential of 292 mV compared to the pure Co3O4 catalyst and the commercial IrO2 catalyst. This enhancement results from the improved active centers and conductivity, which boost the intrinsic reaction kinetics. Further, the optimized Co3S4 catalyst exhibits admirable prolonged durability up to 72 h at varied current rates with insignificant selectivity decay. The energy dispersive X-ray spectroscopy (EDX) and Raman spectra measured after the prolonged OER stability test reveal a partial transformation of the active catalyst into an oxyhydroxide phase (i.e., CoOOH@Co3S4), which acts as an active catalyst phase during the electrolysis process.

Electrocatalytic activity of electrodeposited CoOx thin film on low-carbon unalloyed steel substrate toward electrochemical oxygen evolution reaction (OER)

In this study, we report elaboration of a thin film of CoOx on a low carbon unalloyed steel substrate by electrochemical route and the study of its electrocatalytic performances with respect to the evolution reaction of oxygen (OER) in NaOH medium. The elaborated deposits were well-characterized using X-ray diffraction. Kinetic and thermodynamic parameters such as exchange current density, Tafel slope, reaction order with respect to OH- ions and apparent activation energy were studied. The CoOx displays satisfactory OER performance in an alkaline medium, with a low overvoltage of 362 mV at 10 mA/cm2 and a Tafel slope of 81 mV/dec at 293 K. The apparent kinetic activation energy (= 29.79 kJ/mol) was similar to those obtained for the reported catalytic electrode materials. The O2 gas obtained on the cobalt oxide electrode was 2.865 mmol/s.cm2, which is 28 times higher than that obtained for the platinum electrode (0.102 mmol/s.cm2). Chronoamperometry demonstrates a better electrochemical stability under a polarization potential of 2 V in 1 M NaOH for nearly 25 h. The low cost, the high OER performance, as well as the good stability of the CoOx electrode make it a promising candidate for the industrial-scale water electrolysis.

Interface and electronic structure regulation of Mo-doped NiSe2-CoSe2 heterostructure aerogel for efficient overall water splitting

Transition metal selenides (TMSes) with cubic pyrite-type crystal structure have been widely explored as electrocatalysts for oxygen evolution reaction (OER), but the insufficient hydrogen evolution reaction (HER) performance hinders the application of overall water splitting. Herein, we designed and prepared a Mo doped NiSe₂-CoSe₂ heterostructure aerogel as bifunctional electrocatalyst via facile spontaneous gelation and selenium vapor deposition. The active sites on the heterointerface possessed desirable Gibbs free energy of hydrogen adsorption, leading to better HER performance than single NiSe₂ or CoSe₂. Moreover, systematically experimental research and density functional theory (DFT) calculations revealed that fine regulated Mo doping improved the electropositivity of heterostructure, promoting the nucleophilic adsorption of water molecule. Benefit from those improvements, the optimal Mo doped NiSe₂-CoSe₂ aerogel exhibited an extremely low overpotential of 57 mV at the current density of 10 mA·cm^-2 for HER with a small Tafel slope value of 38 mV·dec^-1. Meanwhile, Mo doping provided higher electron transfer efficiency and better adsorptive property toward reaction intermediate in anodic reaction, resulting in low overpotential of 270 mV at the current density of 100 mA·cm^-2 for OER with good electrocatalytic stability. This work provides an anticipated perspective of rational combination of metal doping and heterostructure for advanced electrocatalysts.

Electrochemical tuning of a Cu3P/Ni2P hybrid for a promoted hydrogen evolution reaction

Developing novel and high performance electrocatalysts for use in hydrogen evolution reactions (HER) as substitutes for noble metal based electrocatalysts is imperative and, so far, has been a challenge. Herein, a self-supported Cu₃P/Ni₂P hybrid on nickel foam (Cu₃P/Ni₂P@NF) is prepared by a simple galvanic replacement reaction coupled with phosphorization. Subsequently, Cu₃P/Ni₂P@NF is modified by conducting cyclic voltammetry scans in 0.5 M H₂SO₄ solution. Interestingly, after electrochemical tuning, the as-prepared Cu₃P/Ni₂P@NF exhibits significantly enhanced HER activity. Particularly, the resultant Cu₃P/Ni₂P@NF catalyst after 4000 cycles exhibits superior catalytic activity and long-term stability for HER with an overpotential of only 67 mV at the current density of 10 mA cm^-2, and a low Tafel slope of 43.9 mV dec^-1. The improved HER performance is attributed to the increased intrinsic activity of the Cu₃P/Ni₂P@NF with its optimized crystal and electronic structure, as well as an increased number of accessible active sites due to surface dissolution and recrystallization induced by electrochemical modification.

Molecular Mechanism of the Mononuclear Copper Complex-Catalyzed Water Oxidation from Cluster-Continuum Model Calculations

Cluster-continuum model calculations were conducted to decipher the mechanism of water oxidation catalyzed by a mononuclear copper complex. Among various O-O bond formation mechanisms investigated in this study, the most favorable pathway involved the nucleophilic attack of OH^- onto the ^.+ L-Cu^II -OH^- intermediate. During such process, the initial binding of OH^- to the proximity of ^.+ L-Cu^II -OH^- would result in the spontaneous oxidation of OH^- , leading to OH⋅ radical and Cu^II -OH^- species. The further O-O coupling between OH⋅ radical and Cu^II -OH^- was associated with a barrier of 14.8 kcal mol^-1 , leading to the formation of H₂ O₂ intermediate. Notably, the formation of "Cu^III -O^.- " species, a widely proposed active species for O-O bond formation, was found to be thermodynamically unfavorable and could be bypassed during the catalytic reactions. On the basis the present calculations, a catalytic cycle of the mononuclear copper complex-catalyzed water oxidation was proposed.

Efficient Oxygen Evolution and Gas Bubble Release Achieved by a Low Gas Bubble Adhesive Iron-Nickel Vanadate Electrocatalyst

Surface chemistry is a pivotal prerequisite besides catalyst composition toward advanced water electrolysis. Here, an evident enhancement of the oxygen evolution reaction (OER) is demonstrated on a vanadate-modified iron-nickel catalyst synthesized by a successive ionic layer adsorption and reaction method, which demonstrates ultralow overpotentials of 274 and 310 mV for delivering large current densities of 100 and 400 mA cm^-2 , respectively, in 1 m KOH, where vigorous gas bubble evolution occurs. Vanadate modification augments the OER activity by i) increasing the electrochemical surface area and intrinsic activity of the active sites, ii) having an electronic interplay with Fe and Ni catalytic centers, and iii) inducing a high surface wettability and a low-gas bubble-adhesion for accelerated mass transport and gas bubble dissipation at large current densities. Ex situ and operando Raman study reveals the structural evolution of β-NiOOH and γ-FeOOH phases during the OER through vanadate-active site synergistic interactions. Operando dynamic specific resistance measurement evidences an accelerated gas bubble dissipation by a significant decrease in the variation of the interfacial resistance during the OER for the vanadate-modified surface. Achievement of a high catalytic turnover of 0.12 s^-1 suggests metallic oxo-anion modification as a versatile catalyst design strategy for advanced water oxidation.

A highly efficient FeP/CeO2-NF hybrid electrode for the oxygen evolution reaction

Transition metal phosphides have been proven as highly efficient electrocatalysts. In this study, a FeP/CeO2-NF hybrid electrode was prepared by a simple electrodeposition and high-temperature phosphorization method. The electrode exhibits outstanding performance for the OER with an overpotential of only 245 mV at a current density of 100 mA cm-2, a Tafel slope as low as 39.1 mV dec-1 and an excellent durability for 50 h at a current density of 10 mA cm-2 in an alkaline solution. Such significant high performances are attributed to a combined effect of the excellent electron conductivity of CeO2 and unique uneven columnar structure of the electrode.

Basicity and Electrolyte Composition Dependent Stability of Ni-Fe-S and Ni-Mo Electrodes during Water Splitting

Non-noble metal electro-catalysts for water splitting are highly desired when we are moving towards a society where green electrons are becoming abundantly available, offering clear prospects to make our society more sustainable. In this work, Ni-Fe-S is reported as a high performing anode material for the water splitting reaction, operating at low overpotentials and showing high apparent stability. Furthermore, Ni-Mo electrodes are developed on metallic foam substrates and optimized in terms of their performance. The Ni-Fe-S material as anode, combined and integrated with Ni-Mo as cathode in a cell configuration, splits water at 10 mA cm-2 and a potential of 1.55 V. Similar to previous reports, we confirm that Mo leaches from Ni-Mo/Ni foam electrodes. Cycling tests and ICP-AES measurements show that the stability of Ni-Fe-S is apparent, and that in reality S is leaching from the material as was already suggested in literature. We expand on this knowledge and show that the leaching of S is dependent on both pH and the cation used during electrocatalysis. Furthermore, we find that applying an oxidative potential is in truth stabilizing towards S and that the alkalinity causes leaching. S was furthermore mobile and found to segregate towards the surface. Finally, using too low pH values (11 and lower) result in the passivating hydroxide metal layers being destroyed and the Ni-Fe-S dissolving completely.

Electrodeposition at Highly Negative Potentials of an Iron-Cobalt Oxide Catalyst for Use in Electrochemical Water Splitting

Earth-abundant transition metal-based catalysts have been extensively investigated for their applicability in water electrolysers to enable overall water splitting to produce clean hydrogen and oxygen. In this study a Fe-Co based catalyst is electrodeposited in 30 seconds under vigorous hydrogen evolution conditions to produce a high surface area material that is active for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). This catalyst can achieve high current densities of 600 mAcm^-2 at an applied potential of 1.6 V (vs RHE) in 1 M NaOH with a Tafel slope value of 48 mV dec^-1 for the OER. In addition, the HER can be facilitated at current densities as high as 400 mA cm^-2 due to the large surface area of the material. The materials were found to be predominantly amorphous but did contain crystalline regions of CoFe₂ O₄ which became more evident after the OER indicating interesting compositional and structural changes that occur to the catalyst after an electrocatalytic reaction. This rapid method of creating a bimetallic oxide electrode for both the HER and OER could possibly be adopted to other bimetallic oxide systems suitable for electrochemical water splitting.

Mono-/Multinuclear Water Oxidation Catalysts

Water splitting, in which water molecules can be transformed into hydrogen and oxygen, is an appealing energy conversion and transformation strategy to address the environmental and energy crisis. The oxygen evolution reaction (OER) is dynamically slow, which limits energy conversion efficiency during the water-splitting process and requires high-efficiency water oxidation catalysts (WOCs) to overcome the OER energy barrier. It is generally accepted that multinuclear WOCs possess superior OER performances, as demonstrated by the CaMn₄ O₅ cluster in photosystem II (PSII), which can catalyze the OER efficiently with a very low overpotential. Inspired by the CaMn₄ O₅ cluster in PSII, some multinuclear WOCs were synthesized that could catalyze water oxidation. In addition, some mononuclear molecular WOCs also show high water oxidation activity. However, it cannot be excluded that the high activity arises from the formation of dimeric species. Recently, some mononuclear heterogeneous WOCs showed a high water oxidation activity, which testified that mononuclear active sites with suitable coordination surroundings could also catalyze water oxidation efficiently. This Review focuses on recent progress in the development of mono-/multinuclear homo- and heterogeneous catalysts for water oxidation. The active sites and possible catalytic mechanisms for water oxidation on the mono-/multinuclear WOCs are provided.

Nanostructured FeNi3 Incorporated with Carbon Doped with Multiple Nonmetal Elements for the Oxygen Evolution Reaction

The sluggish oxygen evolution reaction (OER) through water electrolysis is still challenging. Herein, a facile approach to fabricate highly efficient nanostructured FeNi₃ incorporated on carbon doped with multiple nonmetal elements (FeNi₃ /M-C) was prepared by annealing an in situ polymerized metal complex from economical precursors. The temperature dependence of the structure and the catalytic performance for the OER was probed. The best pyrolysis temperature was 800 °C, at which the fabricated material exhibited the highest catalytic performance for the OER. Specifically, an overpotential as low as 246 mV (no IR correction) afforded 10 mA cm^-2 with a low Tafel slope of 40 mV dec^-1 , exceeding that of the best noble-metal catalyst IrO₂ and other similar Fe-Ni alloys. High catalytic efficiency and anticorrosion ability towards the OER were displayed in terms of high specific surface area, rapid kinetics, high stability, and specific activity. The excellent performance was correlated to the structure and the modest graphitization degree of carbon and an appropriate ratio between graphitic and pyridinic N atoms and the synergistic effect between the Fe-Ni alloy active sites and the conducting carbon doped with multiple nonmetal elements. Moreover, as a powder catalyst, it could be applied in a real polymer electrolyte membrane electrolyzer. These results are helpful for understanding the improved catalytic activity and the promotion of the catalytic efficiency of the Fe-Ni alloy materials for the OER.

Facile Synthesis of a Ternary Metal Hydroxide with Acid Treatment as an Effective and Durable Electrocatalyst in Water Oxidation

Developing low-cost, effective, and durable oxygen-evolution catalysts (OECs) is still a huge challenge owing to the uphill thermodynamic reaction and the involvement of a four-electron and four-proton kinetics process. Herein, a facilely prepared NiCoFe(OH)_x /NiOOH/NF electrode affords current densities of 10 and 100 mA cm^-2 at overpotentials of 223 and 254 mV, respectively, and a Tafel slope as low as 33.5 mV dec^-1 in 1 m KOH, which is superior to NiCoFe(OH)_x /NF electrodes electrodeposited with a traditional method. This electrode also displays surprisingly high durability at a current density of 50 mA cm^-2 for over 50 hours under alkaline conditions. Component analysis and an electrochemical study revealed that the catalytic activity enhancement of this newly prepared electrode is mainly attributed to the formation of the electrically conductive NiOOH interlayer.

Hierarchically Structured FeNiOx Hy Electrocatalyst Formed by In Situ Transformation of Metal Phosphate for Efficient Oxygen Evolution Reaction

A simple and low-cost fabrication method is needed to obtain effective and robust heterogeneous catalysts for the oxygen evolution reaction (OER). In this study, an electrocatalyst FeNiO_x H_y with a hierarchical structure is synthesized on nickel foam by a simple fabrication method through anion exchange from a metal phosphate to a metal hydroxide. The as-fabricated FeNiO_x H_y electrode requires overpotentials of 206 and 234 mV to deliver current densities of 10 and 50 mA cm^-2 , respectively. The catalytic performance of FeNiO_x H_y is superior to that of most previously reported FeNi-based catalysts, including NiFe layered double hydroxide. The catalyst also shows good long-term durability at a current density of 50 mA cm^-2 over 50 h with no activity decay under 1 m KOH. By comparison to the directly electrodeposited FeNi hydroxide in morphology and electrochemical properties, the improved activity of the catalyst could be mainly attributed to an enhancement of its intrinsic activity, which was caused by the anion exchange of phosphate to (oxy)hydroxide. Further studies by cyclic voltammetry indicated a stronger interaction between Ni and Fe from the negative shift of the oxidation peak of Ni²⁺ /Ni³⁺ in comparison with reported FeNiO_x H_y , which promoted the generation of active Ni³⁺ species more easily. This work may provide a new approach to the simple preparation of effective and robust OER catalysts by anion exchange.

Self-Supported Stainless Steel Nanocone Array Coated with a Layer of Ni-Fe Oxides/(Oxy)hydroxides as a Highly Active and Robust Electrode for Water Oxidation

Highly efficient, robust, and cheap water oxidation electrodes are of great significance for large-scale production of hydrogen by electrolysis of water. Here, a self-supported stainless steel (SS) nanocone array coated with a layer of nanoparticulate Ni-Fe oxides/(oxy)hydroxides was fabricated by a facile, low-cost, and easily scalable two-step process. The construction of a nanocone array on the surface of an AISI 304 SS plate by acid corrosion greatly enlarged the specific surface area of the substrate, and the subsequent formation of a layer of Ni-Fe oxides/(oxy)hydroxides featuring the NiFe₂O₄ spinel phase on the nanocone surface by electrodeposition of [Ni(bpy)₃]²⁺ significantly enhanced the intrinsic activity and the stability of the SS-based electrode. The as-prepared electrode demonstrated superior activity for the oxygen evolution reaction (OER) in 1 M KOH, with 232 and 280 mV overpotentials to achieve 10 and 100 mA cm_geo^-2 current densities, respectively. The high activity of the electrode was maintained over 340 h of chronopotentiometric test at 20 mA cm_geo^-2, and the electrode also showed good stability over 100 h of electrolysis at high current density (200 mA cm^-2). More important for practical application, the used SS-based electrode can be easily regenerated with the original OER activity. The superior activity of this SS-based electrode stems from synergistic combination of high conductivity of the SS substrate, a large electrochemically active surface area of the nanocone array, and a uniformly coated nanoparticulate Ni-Fe oxide/(oxy)hydroxide layer with an optimal Ni/Fe ratio.

Ligand-Controlled Electrodeposition of Highly Intrinsically Active and Optically Transparent NiFeOx Hy Film as a Water Oxidation Electrocatalyst

A highly intrinsically active and optically transparent NiFeO_x H_y water oxidation catalyst was prepared by electrodeposition of [Ni(C₁₂ -tpen)](ClO₄ )₂ complex (Ni-C₁₂ ). This NiFeO_x H_y film has a current density of 10 mA cm^-2 with an overpotential (η) of only 298 mV at nanomolar concentration and the current density of 10 mA cm^-2 remains constant over 22 h in 1 m KOH. The extremely high turnover frequency of 0.51 s^-1 was obtained with η of 300 mV. More importantly, such outstanding activity and transparency (optical loss <0.5 %) of the NiFeO_x H_y film are attributed to a ligand effect of the dodecyl substituent in Ni-C₁₂ , which enables its future application in solar water splitting.

Preparation of Cobalt-Based Electrodes by Physical Vapor Deposition on Various Nonconductive Substrates for Electrocatalytic Water Oxidation

Artificial photosynthesis requires efficient anodic electrode materials for water oxidation. Cobalt metal thin films are prepared through facile physical vapor deposition (PVD) on various nonconductive substrates, including regular and quartz glass, mica sheet, polyimide, and polyethylene terephthalate (PET). Subsequent surface electrochemical modification by cyclic voltammetry (CV) renders these films active for electrocatalytic water oxidation, reaching a current density of 10 mA cm^-2 at a low overpotential of 330 mV in 1.0 m KOH solution. These electrodes are robust with unchanged activity throughout prolonged chronopotentiometry measurements. This work is thus significant to show that the combination of PVD and CV is very valuable and convenient to fabricate active electrodes on various nonconductive substrates, particularly with flexible polyimide and PET substrates. This efficient, safe and convenient method can potentially be expanded to many other electrochemical applications.

Graphene-Supported Pyrene-Modified Cobalt Corrole with Axial Triphenylphosphine for Enhanced Hydrogen Evolution in pH 0-14 Aqueous Solutions

A cobalt complex of 5,15-bis(pentafluorophenyl)-10-(4)-(1-pyrenyl)phenyl corrole that contains a triphenylphosphine axial ligand (1-PPh₃ ) was synthesized and examined as an electrocatalyst for the hydrogen evolution reaction (HER). If supported on graphene (G), the resulting 1-PPh₃ /G material can catalyze the HER in aqueous solutions over a wide pH range of 0-14 with a high efficiency and durability. The significantly enhanced activity of 1-PPh₃ /G, compared with that of its analogues 1-py/G (the Co-bound axial ligand is pyridine instead of triphenylphosphine) and 2-py/G (Co complex of 5,10,15-tris(pentafluorophenyl)corrole), highlights the effects of the pyrenyl substituent and the triphenylphosphine axial ligand on the HER activity. On one hand, the pyrenyl moiety can increase the π-π interactions between 1 and graphene and thus lead to a fast electron transfer from the electrode to 1. On the other hand, the triphenylphosphine axial ligand can increase the electron density (basicity) of Co and thus make the metal center more reactive to protons at the trans position through a so-called "push effect". This study concerns a significant example that shows the trans effect of the axial ligand on the HER, which has been investigated rarely. The combination of various ligand-design strategies in one molecule has been realized in 1-PPh₃ to achieve a high catalytic HER performance. These factors are valuable to be used in other molecular catalyst systems.

Electrocatalytic Water Oxidation by MnOx /C: In Situ Catalyst Formation, Carbon Substrate Variations, and Direct O2 /CO2 Monitoring by Membrane-Inlet Mass Spectrometry

Layers of amorphous manganese oxides were directly formed on the surfaces of different carbon materials by exposing the carbon to aqueous solutions of permanganate (MnO₄^- ) followed by sintering at 100-400 °C. During electrochemical measurements in neutral aqueous buffer, nearly all of the MnO_x /C electrodes show significant oxidation currents at potentials relevant for the oxygen evolution reaction (OER). However, by combining electrolysis with product detection by using mass spectrometry, it was found that these currents were only strictly linked to water oxidation if MnO_x was deposited on graphitic carbon materials (faradaic O₂ yields >90 %). On the contrary, supports containing sp³ -C were found to be unsuitable as the OER is accompanied by carbon corrosion to CO₂ . Thus, choosing the "right" carbon material is crucial for the preparation of stable and efficient MnO_x /C anodes for water oxidation catalysis. For MnO_x on graphitic substrates, current densities of >1 mA cm^-2 at η=540 mV could be maintained for at least 16 h of continuous operation at pH 7 (very good values for electrodes containing only abundant elements such as C, O, and Mn) and post-operando measurements proved the integrity of both the catalyst coating and the underlying carbon at OER conditions.

From Enzymes to Functional Materials-Towards Activation of Small Molecules

The design of non-noble metal-containing heterogeneous catalysts for the activation of small molecules is of utmost importance for our society. While nature possesses very sophisticated machineries to perform such conversions, rationally designed catalytic materials are rare. Herein, we aim to raise the awareness of the overall common design and working principles of catalysts incorporating aspects of biology, chemistry, and material sciences.

Highly Active Three-Dimensional NiFe/Cu2 O Nanowires/Cu Foam Electrode for Water Oxidation

Water splitting is of paramount importance for exploiting renewable energy-conversion and -storage systems, but is greatly hindered by the kinetically sluggish oxygen evolution reaction (OER). In this work, a three-dimensional, highly efficient, and durable NiFe/Cu₂ O nanowires/Cu foam anode (NiFe/Cu₂ O NWs/CF) for water oxidation in 1.0 m KOH was developed. The obtained electrode exhibited a current density of 10 mA cm^-2 at a uniquely low overpotential of η=215 mV. The average specific current density (j_s ) was estimated, on the basis of the electrocatalytically active surface area, to be 0.163 mA cm^-2 at η=310 mV. The electrode also displayed a low Tafel slope of 42 mV decade^-1 . Moreover, the NiFe/Cu₂ O NWs/CF electrode could maintain a steady current density of 100 mA cm^-2 for 50 h at an overpotential of η=260 mV. The outstanding electrochemical performance of the electrode for the OER was attributed to the high conductivity of the Cu foam and the specific structure of the electrode with a large interfacial area.

Aligned cobalt-based Co@CoOx nanostructures for efficient electrocatalytic water oxidation

Aligned cobalt metal nanoparticles were prepared from the pyrolysis of cobalt oxalate nanoplate precursors for efficient electrocatalytic water oxidation.

The effect of the trans axial ligand of cobalt corroles on water oxidation activity in neutral aqueous solutions

Co corroles containing electron-donating trans axial ligands are more active than those containing electron-withdrawing trans axial ligands in catalyzing water oxidation.