Considerations for toxicity experiments and risk assessments with PFAS mixtures

Advancing toxicity studies of per- and poly-fluoroalkyl substances (pfass) through machine learning: Models, mechanisms, and future directions

Perfluorinated and perfluoroalkyl substances (PFASs), encompassing a vast array of isomeric chemicals, are recognized as typical emerging contaminants with direct or potential impacts on human health and the ecological environment. With the complex and elusive toxicological profiles of PFASs, machine learning (ML) has been increasingly employed in their toxicity studies due to its proficiency in prediction and data analytics. This integration is poised to become a predominant trend in environmental toxicology, propelled by the swift advancements in computational technology. This review diligently examines the literature to encapsulate the varied objectives of employing ML in the toxicity studies of PFASs: (1) Utilizing ML to establish Quantitative Structure-Activity Relationship (QSAR) models for PFASs with diverse toxicity endpoints, facilitating the targeted toxicity prediction of unidentified PFASs; (2) Investigating and substantiating the Adverse Outcome Pathway (AOP) through the synergy of ML and traditional toxicological methods, with this refining the toxicity assessment framework for PFASs; (3) Dissecting and elucidating the features of established ML models to advance Open Research into the toxicity of PFASs, with a primary focus on determinants and mechanisms. The discourse extends to an in-depth examination of ML studies, segregating findings based on their distinct application trajectories. Given that ML represents a nascent paradigm within PFASs research, this review delineates the collective challenges encountered in the ML-mediated study of PFAS toxicity and proffers strategic guidance for ensuing investigations.

Neurotoxic Effects of Mixtures of Perfluoroalkyl Substances (PFAS) at Environmental and Human Blood Concentrations

Per- and polyfluoroalkyl substances (PFAS) may cause various deleterious health effects. Epidemiological studies have demonstrated associations between PFAS exposure and adverse neurodevelopmental outcomes. The cytotoxicity, neurotoxicity, and mitochondrial toxicity of up to 12 PFAS including perfluoroalkyl carboxylates, perfluoroalkyl sulfonates, 6:2 fluorotelomer sulfonic acid (6:2 FTSA), and hexafluoropropylene oxide-dimer acid (HPFO-DA) were tested at concentrations typically observed in the environment (e.g., wastewater, biosolids) and in human blood using high-throughput in vitro assays. The cytotoxicity of all individual PFAS was classified as baseline toxicity, for which prediction models based on partition constants of PFAS between biomembrane lipids and water exist. No inhibition of the mitochondrial membrane potential and activation of oxidative stress response were observed below the cytotoxic concentrations of any PFAS tested. All mixture components and the designed mixtures inhibited the neurite outgrowth in differentiated neuronal cells derived from the SH-SY5Y cell line at concentrations around or below cytotoxicity. All designed mixtures acted according to concentration addition at low effect and concentration levels for cytotoxicity and neurotoxicity. The mixture effects were predictable from the experimental single compounds' concentration-response curves. These findings have important implications for the mixture risk assessment of PFAS.

Community-Engaged Research and the Use of Open Access ToxVal/ToxRef In Vivo Databases and New Approach Methodologies (NAM) to Address Human Health Risks From Environmental Contaminants

BACKGROUND

The paper analyzes opportunities for integrating Open access resources (Abstract Sifter, US EPA and NTP Toxicity Value and Toxicity Reference [ToxVal/ToxRefDB]) and New Approach Methodologies (NAM) integration into Community Engaged Research (CEnR).

METHODS

CompTox Chemicals Dashboard and Integrated Chemical Environment with in vivo ToxVal/ToxRef and NAMs (in vitro) databases are presented in three case studies to show how these resources could be used in Pilot Projects involving Community Engaged Research (CEnR) from the University of California, Davis, Environmental Health Sciences Center.

RESULTS

Case #1 developed a novel assay methodology for testing pesticide toxicity. Case #2 involved detection of water contaminants from wildfire ash and Case #3 involved contaminants on Tribal Lands. Abstract Sifter/ToxVal/ToxRefDB regulatory data and NAMs could be used to screen/prioritize risks from exposure to metals, PAHs and PFAS from wildfire ash leached into water and to investigate activities of environmental toxins (e.g., pesticides) on Tribal lands. Open access NAMs and computational tools can apply to detection of sensitive biological activities in potential or known adverse outcome pathways to predict points of departure (POD) for comparison with regulatory values for hazard identification. Open access Systematic Empirical Evaluation of Models or biomonitoring exposures are available for human subpopulations and can be used to determine bioactivity (POD) to exposure ratio to facilitate mitigation.

CONCLUSIONS

These resources help prioritize chemical toxicity and facilitate regulatory decisions and health protective policies that can aid stakeholders in deciding on needed research. Insights into exposure risks can aid environmental justice and health equity advocates.

Mixtures of legacy and replacement perfluorosulphonic acids (PFSAs) demonstrate ratio-, concentration- and endpoint-dependent synergistic interactions in vitro

The extensive use of poly- and per-fluoroalkyl substances (PFASs) has les to their widespread presence in the environment, raising concerns about potential toxicity. While certain PFASs of concern have been phased-out or banned, new PFASs continue to be produced. Two such substances are perfluoroethylcyclohexane sulphonate (PFECHS) and perfluorobutane sulphamide (FBSA), replacements of perfluoroctanesulphonic acid (PFOS) that have recently been detected in multiple environmental media around the globe. Despite PFASs generally occurring in the environment as mixtures, few data are available outlining the effects of PFAS mixtures. Therefore, this research investigated the interaction potential of binary and ternary mixtures of emerging and legacy PFASs. The immortalized rainbow trout gill cell line (RTgill-W1) was chosen as the experimental model to investigate two apical endpoints: cytotoxicity and phospholipidosis. RTgill-W1 cells were exposed for 24 h to each compound to obtain endpoint-specific effect concentrations (LCx; ECx). These values were then applied to formulate mixture predictions following the Loewes Additivity and Steel and Peckham methods. Based on cytotoxicity, relative potencies of individual compounds were: PFOS > PFECHS > FSBA. PFOS and PFECHS had nearly identical effects on phospholipidosis, while FSBA did not have any effects. Most mixtures had a synergistic effect on cytotoxicity, but the effect was both dose- and ratio-dependent. PFOS and PFECHS were additive at lower concentrations (LC10) and synergistic at higher concentrations (LC50; 3:1, 1:1, and 1:3). PFECHS and FSBA mixtures were synergistic at all doses and ratios (3:1, 1:1, 1:3), while FBSA and PFOS were mainly synergistic at higher concentrations and at ratios favouring PFOS (1:1, 1:3). Tertiary combinations were mainly synergistic. For phospholipidosis, mixtures were strictly additive. These results are strongly suggestive of synergism between emerging PFAS replacements and highlight that independent apical mechanisms of different PFASs could combine to induce unexpected toxicity. Considering that emerging replacements are continuing to increase in concentration in the environment, such mixture scenarios are also likely to continue to increase in probability.

Quantification of PFAS in rice and maize: Validation of a UHPLC-HRMS/MS isotopic dilution approach in support to food safety

In the present work, an analytical method for the quantification of per and poly fluoroalkyl substances (PFAS) in rice and maize has been developed and then validated with a metrological approach. PFAS are a group of human-made chemicals used in a variety of industries and consumer products for their water- and grease-resistant properties. Studies have shown that PFAS can contaminate soil and water, and there is concern about their bioaccumulation in edible plants, fruits, and cereals. The presence of PFAS has been identified in rice and other food products, including maize, as indicated by studies and scientific literature. This is particularly alarming since some PFAS have been associated with adverse health effects and rice and maize account for over 20% of the annual food intake worldwide. Despite this evidence, the regulation currently in place is not covering cereal matrices and limits of quantification for matrices encompassed by the current legislation are defined for a small group of PFAS. In this study an UHPLC-HRMS/MS based method was validated, obtaining a LOQ (Limit Of Quantification) ranging between 2 ng/kg and 32 ng/kg and robustness in line with EU guidelines and recommendation for PFAS in food. Additionally, a metrological approach was employed to estimate the uncertainty budget, utilizing modeling and experimental methods, and comparing the outcomes, aiming to characterize with high accuracy PFAS in rice and maize and support control bodies to assess contamination in suspected areas. A comparison of uncertainty of different approaches was conducted after applying the method to 30 real samples.

Enhancing the Thermal Mineralization of Perfluorooctanesulfonate on Granular Activated Carbon Using Alkali and Alkaline-Earth Metal Additives

Thermal treatment has emerged as a promising approach for either the end-of-life treatment or regeneration of granular activated carbon (GAC) contaminated with per- and polyfluoroalkyl substances (PFAS). However, its effectiveness has been limited by the requirement for high temperatures, the generation of products of incomplete destruction, and the necessity to scrub HF in the flue gas. This study investigates the use of common alkali and alkaline-earth metal additives to enhance the mineralization of perfluorooctanesulfonate (PFOS) adsorbed onto GAC. When treated at 800 °C without an additive, only 49% of PFOS was mineralized to HF. All additives tested demonstrated improved mineralization, and Ca(OH)2 had the best performance, achieving a mineralization efficiency of 98% in air or N2. Its ability to increase the reaction rate and shift the byproduct selectivity suggests that its role may be catalytic. Moreover, additives reduced HF in the flue gas by instead reacting with the additive to form inorganic fluorine (e.g., CaF2) in the starting waste material. A hypothesized reaction mechanism is proposed that involves the electron transfer from O2- defect sites of CaO to intermediates formed during the thermal decomposition of PFOS. These findings advocate for the use of additives in the thermal treatment of GAC for disposal or reuse, with the potential to reduce operating costs and mitigate the environmental impact associated with incinerating PFAS-laden wastes.

Time Is Ripe for Targeting Per- and Polyfluoroalkyl Substances-Induced Hormesis: Global Aquatic Hotspots and Implications for Ecological Risk Assessment

Globally implemented ecological risk assessment (ERA) guidelines marginalize hormesis, a biphasic dose-response relationship characterized by low-dose stimulation and high-dose inhibition. The present study illuminated the promise of hormesis as a scientific dose-response model for ERA of per- and polyfluoroalkyl substances (PFAS) represented by perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS). A total of 266 hormetic dose-response relationships were recompiled from 1237 observations, covering 30 species from nine representative taxonomic groups. The standardized hormetic amplitudes followed the log-normal probability distribution, being subject to the limits of biological plasticity but independent of stress inducers. The SHapley Additive exPlanations algorithm revealed that the target endpoint was the most important variable explaining the hormetic amplitudes. Subsequently, quantitative frameworks were established to incorporate hormesis into the predicted no-effect concentration levels, with a lower induction dose and a zero-equivalent point but a broader hormetic zone for PFOS. Realistically, 10,117 observed concentrations of PFOA and PFOS were gathered worldwide, 4% of which fell within hormetic zones, highlighting the environmental relevance of hormesis. Additionally, the hormesis induction potential was identified in other legacy and emerging PFAS as well as their alternatives and mixtures. Collectively, it is time to incorporate the hormesis concept into PFAS studies to facilitate more realistic risk characterizations.

Considerations and challenges in support of science and communication of fish consumption advisories for per- and polyfluoroalkyl substances

Federal, state, tribal, or local entities in the United States issue fish consumption advisories (FCAs) as guidance for safer consumption of locally caught fish containing contaminants. Fish consumption advisories have been developed for commonly detected compounds such as mercury and polychlorinated biphenyls. The existing national guidance does not specifically address the unique challenges associated with bioaccumulation and consumption risk related to per- and polyfluoroalkyl substances (PFAS). As a result, several states have derived their own PFAS-related consumption guidelines, many of which focus on one frequently detected PFAS, known as perfluorooctane sulfonic acid (PFOS). However, there can be significant variation between tissue concentrations or trigger concentrations (TCs) of PFOS that support the individual state-issued FCAs. This variation in TCs can create challenges for risk assessors and risk communicators in their efforts to protect public health. The objective of this article is to review existing challenges, knowledge gaps, and needs related to issuing PFAS-related FCAs and to provide key considerations for the development of protective fish consumption guidance. The current state of the science and variability in FCA derivation, considerations for sampling and analytical methodologies, risk management, risk communication, and policy challenges are discussed. How to best address PFAS mixtures in the development of FCAs, in risk assessment, and establishment of effect thresholds remains a major challenge, as well as a source of uncertainty and scrutiny. This includes developments better elucidating toxicity factors, exposures to PFAS mixtures, community fish consumption behaviors, and evolving technology and analytical instrumentation, methods, and the associated detection limits. Given the evolving science and public interests informing PFAS-related FCAs, continued review and revision of FCA approaches and best practices are vital. Nonetheless, consistent, widely applicable, PFAS-specific approaches informing methods, critical concentration thresholds, and priority compounds may assist practitioners in PFAS-related FCA development and possibly reduce variability between states and jurisdictions. Integr Environ Assess Manag 2024;00:1-20. © 2024 SETAC.

The "forever" per- and polyfluoroalkyl substances (PFAS): A critical accounting of global research on a major threat under changing regulations

The European Commission's current efforts to launch the largest proposal to restrict per- and polyfluoroalkyl substances (PFAS) in history reflect the dire global plight of PFAS accumulation in the environment and their health impacts. While there are existing studies on PFAS research, there is a lack of comprehensive analysis that both covers the entire research period and provides deep insights into global research patterns, incentives, and barriers based on various parameters. We have been able to demonstrate the increasing interest in PFAS research, although citation numbers are declining prematurely. Policy regulations based on proving and establishing the toxicity of PFASs have stimulated research in developed countries and vice versa, with increasing emphasis on ecological aspects. China, in particular, is investing increasingly in PFAS research, but without defining or implementing regulations - with devastating effects. The separation of industrial and environmental research interests is clear, with little involvement of developing countries, even though their exposure to PFAS is devastating. It, therefore, requires increased globally networked and multidisciplinary approaches to address PFAS contamination challenges.

Implications of biotic factors for toxicity testing in laboratory studies

There is an emerging call from scientists globally to advance the environmental relevance of laboratory studies, particularly within the field of ecotoxicology. To answer this call, we must carefully examine and elucidate the shortcomings of standardized toxicity testing methods that are used in the derivation of toxicity values and regulatory criteria. As a consequence of rapidly accelerating climate change, the inclusion of abiotic co-stressors are increasingly being incorporated into toxicity studies, with the goal of improving the representativeness of laboratory-derived toxicity values used in ecological risk assessments. However, much less attention has been paid to the influence of biotic factors that may just as meaningfully impact our capacity to evaluate and predict risks within impacted ecosystems. Therefore, the overarching goal is to highlight key biotic factors that should be taken into consideration during the experimental design and model selection phase. SYNOPSIS: Scientists are increasingly finding that lab reared results in toxicology might not be reflective of the external wild environment, we highlight in this review some key considerations when working between the lab and field.

Effect of clay content on the mobilization efficiency of per- and polyfluoroalkyl substances (PFAS) from soils by electrokinetics and hydraulic flushing

The need for the efficient remediation of soils impacted by per- and polyfluoroalkyl substances (PFAS) is substantially growing because of the notable upsurge in societal and regulatory awareness of this class of chemicals. To remediate PFAS-contaminated soils using mobilization approaches, the choice of appropriate techniques highly depends on the soil's composition, particularly the clay content, which significantly affects the soil's permeability. Here, we investigated the PFAS mobilization efficiency from soils with different clay contents by using two techniques: electrokinetic (EK) remediation and hydraulic flushing. Artificial kaolinite was added to a loamy sand soil to prepare four soil blends with clay contents of 5, 25, 50, and 75%, each contaminated with perfluorooctanoic acid (PFOA) and perfulorooctanesulfonic acid (PFOA) at 10,000 μg/kg. EK remediation was conducted by applying a low voltage (30 V) with a current of 100 mA, and hydraulic flushing was carried out by applying a hydraulic gradient (HG) with a slope of 6.7%. Results show that, with a 14-day treatment duration, the EK-mobilization efficiency was enhanced substantially with the increase of clay content (removal of PFOS increased from 20% at 5% clay to 80% at 75% clay), most likely due to the increase of electroosmotic flow due to the higher content of particles having a zeta potential (i.e., clay). For HG, increasing the clay content significantly suppressed the mobilization of PFAS (removal of PFOS decreased from 40% at 5% clay to 10% at 75% clay) due to a notable decrease in the soil's permeability. Based on the results, applying hydraulic flushing and washing techniques for mobilizing PFAS would be appropriate when treating permeable soils with a maximum clay content of about 25%; otherwise, other suitable mobilization techniques such as EKs should be considered.

Acute Exposure of Zebrafish (Danio rerio) to the Next-Generation Perfluoroalkyl Substance, Perfluoroethylcyclohexanesulfonate, Shows Similar Effects as Legacy Substances

Perfluoroethylcyclohexanesulfonate (PFECHS) is an emerging perfluoroalkyl substance (PFAS) that has been considered a potential replacement for perfluorooctanesulfonic acid (PFOS). However, there is little information characterizing the toxic potency of PFECHS to zebrafish embryos and its potential for effects in aquatic environments. This study assessed toxic potency of PFECHS in vivo during both acute (96-hour postfertilization) and chronic (21-day posthatch) exposures and tested concentrations of PFECHS from 500 ng/L to 2 mg/L. PFECHS was less likely to cause mortalities than PFOS for both the acute and chronic experiments based on previously published values for PFOS exposure, but exposure resulted in a similar incidence of deformities. Exposure to PFECHS also resulted in significantly increased abundance of transcripts of peroxisome proliferator activated receptor alpha (pparα), cytochrome p450 1a1 (cyp1a1), and apolipoprotein IV (apoaIV) at concentrations nearing those of environmental relevance. Overall, these results provide further insight into the safety of an emerging PFAS alternative in the aquatic environment and raise awareness that previously considered "safer" alternatives may show similar effects as legacy PFASs.

Review of influence of critical operation conditions on by-product/intermediate formation during thermal destruction of PFAS in solid/biosolids

Poly- and perfluoroalkyl substances (PFAS) are a large group of synthetic organofluorine compounds. Over 4700 PFAS compounds have been produced and used in our daily life since the 1940s. PFAS have received considerable interest because of their toxicity, environmental persistence, bioaccumulation and wide existence in the environment. Various treatment methods have been developed to overcome these issues. Thermal treatment such as combustion and pyrolysis/gasification have been employed to treat PFAS contaminated solids and soils. However, short-chain PFAS and/or volatile organic fluorine is produced and emitted via exhaust gas during the thermal treatment. Combustion can achieve complete mineralisation of PFAS at large scale operation using temperatures >1000 °C. Pyrolysis has been used in treatment of biosolids and has demonstrated that it could remove PFAS completely from the generated biochar by evaporation and degradation. Although pyrolysis partially degrades PFAS to short-chain fluorine containing organics in the syngas, it could not efficiently mineralise PFAS. Combustion of PFAS containing syngas at 1000 °C can achieve complete mineralisation of PFAS. Furthermore, the by-product of mineralisation, HF, should also be monitored due to its low regulated atmospheric discharge values. Alkali scrubbing is normally required to lower the HF concentration in the exhaust gas to acceptable discharge concentrations.

Leveraging Multiple Data Streams for Prioritization of Mixtures for Hazard Characterization

There is a growing need to establish alternative approaches for mixture safety assessment of polycyclic aromatic hydrocarbons (PAHs). Due to limitations with current component-based approaches, and the lack of established methods for using whole mixtures, a promising alternative is to use sufficiently similar mixtures; although, an established framework is lacking. In this study, several approaches are explored to form sufficiently similar mixtures. Multiple data streams including environmental concentrations and empirically and predicted toxicity data for cancer and non-cancer endpoints were used to prioritize chemical components for mixture formations. Air samplers were analyzed for unsubstituted and alkylated PAHs. A synthetic mixture of identified PAHs was created (Creosote-Fire Mix). Existing toxicity values and chemical concentrations were incorporated to identify hazardous components in the Creosote-Fire Mix. Sufficiently similar mixtures of the Creosote-Fire Mix were formed based on (1) relative abundance; (2) toxicity values; and (3) a combination approach incorporating toxicity and abundance. Hazard characterization of these mixtures was performed using high-throughput screening in primary normal human bronchial epithelium (NHBE) and zebrafish. Differences in chemical composition and potency were observed between mixture formation approaches. The toxicity-based approach (Tox Mix) was the most potent mixture in both models. The combination approach (Weighted-Tox Mix) was determined to be the ideal approach due its ability to prioritize chemicals with high exposure and hazard potential.

Toxicokinetic Modeling of Per- and Polyfluoroalkyl Substance Concentrations within Developing Zebrafish (Danio rerio) Populations

Per- and polyfluoroalkyl substances (PFAS) are pervasive environmental contaminants, and their relative stability and high bioaccumulation potential create a challenging risk assessment problem. Zebrafish (Danio rerio) data, in principle, can be synthesized within a quantitative adverse outcome pathway (qAOP) framework to link molecular activity with individual or population level hazards. However, even as qAOP models are still in their infancy, there is a need to link internal dose and toxicity endpoints in a more rigorous way to further not only qAOP models but adverse outcome pathway frameworks in general. We address this problem by suggesting refinements to the current state of toxicokinetic modeling for the early development zebrafish exposed to PFAS up to 120 h post-fertilization. Our approach describes two key physiological transformation phenomena of the developing zebrafish: dynamic volume of an individual and dynamic hatching of a population. We then explore two different modeling strategies to describe the mass transfer, with one strategy relying on classical kinetic rates and the other incorporating mechanisms of membrane transport and adsorption/binding potential. Moving forward, we discuss the challenges of extending this model in both timeframe and chemical class, in conjunction with providing a conceptual framework for its integration with ongoing qAOP modeling efforts.

How to investigate human health effects related to exposure to mixtures of per- and polyfluoroalkyl substances: A systematic review of statistical methods

BACKGROUND

Humans are exposed to several per- and polyfluoroalkyl substances (PFAS) daily; however, most previous studies have focused on individual PFAS. Although attention to effects of exposure to mixtures of PFAS has grown in recent years, there is no consensus on the appropriate statistical methods that can be used to assess their combined effect on human health.

OBJECTIVES

We aim to perform a comprehensive review of the statistical methods used in the existing studies which evaluate the association between exposure to mixtures of PFAS and any adverse human health effect.

METHODS

The online databases PubMed, Embase and Scopus were searched for eligible studies, published during the last ten years (last search performed on April 08, 2021). Covidence software was used by two different reviewers to perform a title/abstract screening, followed by a full text revision of the selected papers.

RESULTS

A total of 3640 papers were identified, and after the screening process, 53 papers were included in the current review. Most of the studies were published between 2019 and 2021 and were conducted mainly in North America and Europe; more than half of the studies (28 out of 53) were conducted on mother and child pairs. WQS (Weighted Quantile Sum) Regression and BKMR (Bayesian Kernel Machine Regression) were used in 36 out of 53 papers to model mixtures' effects. Health outcomes included in the studies are immunotoxicity (n = 8), fetal development (n = 7), neurodevelopment (n = 9), reproductive hormones (n = 6), thyroid hormones (n = 7), outcomes related to metabolic pathways (n = 16).

CONCLUSION

Studies on human exposure to PFAS as complex mixtures and health consequences have substantially increased in the last few years. Based on our findings, we propose that addressing risk from PFAS mixtures will likely require combinations of approaches and implementation of constantly evolving statistical methods. Specific guidelines and tools for quality assessment and publication of mixture observational studies are warranted.

Single PFAS and PFAS mixtures affect nuclear receptor- and oxidative stress-related pathways in precision-cut liver slices of Atlantic cod (Gadus morhua)

The aim of the present study was to investigate effects of per- and polyfluoroalkyl substances (PFAS), both single compounds and a mixture of these, using precision-cut liver slices (PCLS) from Atlantic cod (Gadus morhua). PCLS were exposed for 48 h to perfluorooctane sulfonate (PFOS), perfluorooctanoate (PFOA) and perfluorononanoate (PFNA) (10, 50 and 100 μM), and three mixtures of these at equimolar concentrations (10, 50 and 100 μM). Transcriptomic responses were assessed using RNA sequencing. Among exposures to single PFAS, PFOS produced the highest number of differentially expressed genes (DEGs) compared to PFOA and PFNA (86, 25 and 31 DEGs, respectively). Exposure to the PFAS mixtures resulted in a markedly higher number of DEGs (841). Clustering analysis revealed that the expression pattern of the PFAS mixtures were more similar to PFOS compared to PFOA and PFNA, suggesting that effects induced by the PFAS mixtures may largely be attributed to PFOS. Pathway analysis showed significant enrichment of pathways related to oxidative stress, cholesterol metabolism and nuclear receptors in PFOS-exposed PCLS. Fewer pathways were significantly enriched following PFOA and PFNA exposure alone. Significantly enriched pathways following mixture exposure included lipid biosynthesis, cancer-related pathways, nuclear receptor pathways and oxidative stress-related pathways such as ferroptosis. The expression of most of the genes within these pathways was increased following PFAS exposure. Analysis of non-additive effects in the 100 μM PFAS mixture highlighted genes involved in the antioxidant response and membrane transport, among others, and the majority of these genes had synergistic expression patterns in the mixture. Nevertheless, 90% of the DEGs following mixture exposure showed additive expression patterns, suggesting additivity to be the major mixture effect. In summary, PFAS exposure promoted effects on cellular processes involved in oxidative stress, nuclear receptor pathways and sterol metabolism in cod PCLS, with the strongest effects observed following PFAS mixture exposure.

Per- and polyfluoroalkyl substances in the environment

Over the past several years, the term PFAS (per- and polyfluoroalkyl substances) has grown to be emblematic of environmental contamination, garnering public, scientific, and regulatory concern. PFAS are synthesized by two processes, direct fluorination (e.g., electrochemical fluorination) and oligomerization (e.g., fluorotelomerization). More than a megatonne of PFAS is produced yearly, and thousands of PFAS wind up in end-use products. Atmospheric and aqueous fugitive releases during manufacturing, use, and disposal have resulted in the global distribution of these compounds. Volatile PFAS facilitate long-range transport, commonly followed by complex transformation schemes to recalcitrant terminal PFAS, which do not degrade under environmental conditions and thus migrate through the environment and accumulate in biota through multiple pathways. Efforts to remediate PFAS-contaminated matrices still are in their infancy, with much current research targeting drinking water.

PFAS Molecules: A Major Concern for the Human Health and the Environment

Per- and polyfluoroalkyl substances (PFAS) are a group of over 4700 heterogeneous compounds with amphipathic properties and exceptional stability to chemical and thermal degradation. The unique properties of PFAS compounds has been exploited for almost 60 years and has largely contributed to their wide applicability over a vast range of industrial, professional and non-professional uses. However, increasing evidence indicate that these compounds represent also a serious concern for both wildlife and human health as a result of their ubiquitous distribution, their extreme persistence and their bioaccumulative potential. In light of the adverse effects that have been already documented in biota and human populations or that might occur in absence of prompt interventions, the competent authorities in matter of health and environment protection, the industries as well as scientists are cooperating to identify the most appropriate regulatory measures, substitution plans and remediation technologies to mitigate PFAS impacts. In this review, starting from PFAS chemistry, uses and environmental fate, we summarize the current knowledge on PFAS occurrence in different environmental media and their effects on living organisms, with a particular emphasis on humans. Also, we describe present and provisional legislative measures in the European Union framework strategy to regulate PFAS manufacture, import and use as well as some of the most promising treatment technologies designed to remediate PFAS contamination in different environmental compartments.

Combined effects of mixed per- and polyfluoroalkyl substances on the Nrf2-ARE pathway in ARE reporter-HepG2 cells

Although the Nrf2-ARE pathway plays a critical role in cellular protection against toxicity and oxidative stress from environmental chemical stressors, the association between exposure to per- and polyfluoroalkyl substances (PFAS) mixtures and the changes of Nrf2-ARE pathway remains largely unexplored. This study evaluated the potential of PFAS to induce the Nrf2-ARE pathway as individual compounds and as binary, ternary, and multicomponent mixtures in the ARE reporter-HepG2 cells and compared the mixture toxicity data to the predictions by concentration addition (CA) model. The toxicological interactions between PFAS mixture components were also determined by the model deviation ratio (MDR) between the CA predicted and mixture toxicity values. The induction of the Nrf2-ARE pathway was quantified using the luciferase system, and the endpoint assessed was the concentration that induced an induction ratio (IR) of 1.5 (EC_IR1.5). The results showed that exposures to both individual and mixed PFAS induced the Nrf2-ARE pathway in ARE reporter-HepG2 cells. Based on the MDRs, the combinations with PFOS showed synergistic interactive effects, while the combinations with PFOA showed additive effects. These results indicate that the CA model underestimated the mixture toxicity of PFAS with PFOS co-exposures and may have health risk assessment implications.

Chronic Reproductive Toxicity Thresholds for Northern Bobwhite Quail (Colinus virginianus) Exposed to Perfluorohexanoic Acid (PFHxA) and a Mixture of Perfluorooctane Sulfonic Acid (PFOS) and PFHxA

Terrestrial toxicology data are limited for comprehensive ecotoxicological risk assessment of ecosystems contaminated by per- and polyfluoroalkyl substances (PFAS) partly because of their existence as mixtures in the environment. This complicates logistical dose-response modeling and establishment of a threshold value characterizing the chronic toxicity of PFAS to ecological receptors. We examined reproduction, growth, and survival endpoints using a combination of hypothesis testing and logistical dose-response modeling of northern bobwhite quail (Colinus virginianus) exposed to perfluorohexanoic acid (PFHxA) alone and to PFHxA in a binary mixture with perfluorooctane sulfonic acid (PFOS) via the drinking water. The exposure concentration chronic toxicity value (CTV) representative of the lowest-observable-adverse effect level (LOAEL) threshold for chronic oral PFAS toxicity (based on reduced offspring weight and growth rate) was 0.10 ng/mL for PFHxA and 0.06 ng/mL for a PFOS:PFHxA (2.7:1) mixture. These estimates corresponded to an adult LOAEL average daily intake CTV of 0.0149 and 0.0082 µg × kg body weight^-1  × d^-1 , respectively. Neither no-observable-adverse effect level threshold and representative CTVs nor dose-response and predicted effective concentration values could be established for these 2 response variables. The findings indicate that a reaction(s) occurs among the individual PFAS components present in the mixture to alter the potential toxicity, demonstrating that mixture affects avian PFAS toxicity. Thus, chronic oral PFAS toxicity to avian receptors represented as the sum of the individual compound toxicities may not necessarily be the best method for assessing chronic mixture exposure risk at PFAS-contaminated sites. Environ Toxicol Chem 2021;40:2601-2614. © 2021 SETAC.

Ecological risk assessment of per- and polyfluorinated alkyl substances: Foreword

During the last 5 years, data and guidance to support ecological risk assessment of per- and polyfluorinated alkyl substance (PFAS) have become increasingly available. The studies presented in this special series exemplify and advance this progress. Among the highlights are a whole-colony honey bee toxicity study, a critical evaluation of contrasting evidence to understand avian toxicity of PFAS, a bioaccumulation model incorporating PFOS precursor transformation, and an assessment of PFAS monitoring and regulatory needs on the African continent. This foreword closes with a summary of research needs identified from the special series. Integr Environ Assess Manag 2021;17:670-672. © 2021 SETAC.