Effect of the conformation and orientation of adsorbed fibronectin on endothelial cell spreading and the strength of adhesion

Biofabrication of engineered blood vessels for biomedical applications

To successfully engineer large-sized tissues, establishing vascular structures is essential for providing oxygen, nutrients, growth factors and cells to prevent necrosis at the core of the tissue. The diameter scale of the biofabricated vasculatures should range from 100 to 1,000 µm to support the mm-size tissue while being controllably aligned and spaced within the diffusion limit of oxygen. In this review, insights regarding biofabrication considerations and techniques for engineered blood vessels will be presented. Initially, polymers of natural and synthetic origins can be selected, modified, and combined with each other to support maturation of vascular tissue while also being biocompatible. After they are shaped into scaffold structures by different fabrication techniques, surface properties such as physical topography, stiffness, and surface chemistry play a major role in the endothelialization process after transplantation. Furthermore, biological cues such as growth factors (GFs) and endothelial cells (ECs) can be incorporated into the fabricated structures. As variously reported, fabrication techniques, especially 3D printing by extrusion and 3D printing by photopolymerization, allow the construction of vessels at a high resolution with diameters in the desired range. Strategies to fabricate of stable tubular structures with defined channels will also be discussed. This paper provides an overview of the many advances in blood vessel engineering and combinations of different fabrication techniques up to the present time.

Fibronectin anchoring to viscoelastic poly(dimethylsiloxane) elastomers controls fibroblast mechanosensing and directional motility

The established link between deregulated tissue mechanics and various pathological states calls for the elucidation of the processes through which cells interrogate and interpret the mechanical properties of their microenvironment. In this work, we demonstrate that changes in the presentation of the extracellular matrix protein fibronectin on the surface of viscoelastic silicone elastomers have an overarching effect on cell mechanosensing, that is independent of bulk mechanics. Reduction of surface hydrophilicity resulted in altered fibronectin adsorption strength as monitored using atomic force microscopy imaging and pulling experiments. Consequently, primary human fibroblasts were able to remodel the fibronectin coating, adopt a polarized phenotype and migrate directionally even on soft elastomers, that otherwise were not able to resist the applied traction forces. The findings presented here provide valuable insight on how cellular forces are regulated by ligand presentation and used by cells to probe their mechanical environment, and have implications on biomaterial design for cell guidance.

Manganese-containing Bioactive Glass Enhances Osteogenic Activity of TiO2 Nanotube Arrays

Titanium and its alloys are the most used biomaterials for orthopedic and dental applications. However, up to 10% of these medical devices still fail, mostly due to implant loosening and suboptimal integration at the implant site. The biomaterial surface plays a critical role in promoting osseointegration, which can reduce the risk of device failure. In this study, we propose a novel surface modification on titanium to improve osteogenic differentiation by depositing manganese-containing bioactive glass (BG) on TiO₂ nanotube arrays. The surfaces were characterized by scanning electron microscopy, energy dispersive X-ray spectrometer, contact angle goniometry, and X-ray photoelectron spectroscopy. Cell toxicity, viability, adhesion, and proliferation of adipose-derived stem cells on the surfaces were investigated up to 7 days. To evaluate the osteogenic properties of the surfaces, alkaline phosphatase activity, total protein, osteocalcin expression, and calcium deposition were quantified up to 28 days. The results indicate that TiO₂ nanotube arrays modified with BG promote cell growth and induce increased osteocalcin and calcium contents when compared to unmodified TiO₂ nanotube arrays. The deposition of manganese-containing bioactive glass onto TiO₂ nanotubes demonstrates the ability to enhance osteogenic activity on titanium, showing great potential for use in orthopedic and dental implants.

High-Throughput Methods in the Discovery and Study of Biomaterials and Materiobiology

The complex interaction of cells with biomaterials (i.e., materiobiology) plays an increasingly pivotal role in the development of novel implants, biomedical devices, and tissue engineering scaffolds to treat diseases, aid in the restoration of bodily functions, construct healthy tissues, or regenerate diseased ones. However, the conventional approaches are incapable of screening the huge amount of potential material parameter combinations to identify the optimal cell responses and involve a combination of serendipity and many series of trial-and-error experiments. For advanced tissue engineering and regenerative medicine, highly efficient and complex bioanalysis platforms are expected to explore the complex interaction of cells with biomaterials using combinatorial approaches that offer desired complex microenvironments during healing, development, and homeostasis. In this review, we first introduce materiobiology and its high-throughput screening (HTS). Then we present an in-depth of the recent progress of 2D/3D HTS platforms (i.e., gradient and microarray) in the principle, preparation, screening for materiobiology, and combination with other advanced technologies. The Compendium for Biomaterial Transcriptomics and high content imaging, computational simulations, and their translation toward commercial and clinical uses are highlighted. In the final section, current challenges and future perspectives are discussed. High-throughput experimentation within the field of materiobiology enables the elucidation of the relationships between biomaterial properties and biological behavior and thereby serves as a potential tool for accelerating the development of high-performance biomaterials.

Silane coatings of metallic biomaterials for biomedical implants: A preliminary review

In response to increased attention in literature, this work provides a qualitative review surrounding the application of silane-based coatings of metallic biomaterials for biomedical implants. Included herein is both a brief summary of existing knowledge and concepts regarding silane-based thin films, along with an analysis of recent peer-reviewed publications and advances towards their practical application for biomedical coatings. Specifically, the review identifies innovative silane-based coatings according to their molecular identity and film structure and analyses their impact on the biocorrosion resistance, protein adsorption, cell viability, and antimicrobial properties of the overall coated implant. It is shown that a range of common silanes clearly exhibit promising properties for biomedical implant coatings, but further work is needed, particularly on mechanisms of physiological interaction and characteristic effects of silane functional groups, before seeing clinical use. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2901-2918, 2018.

Mono vs multilayer fibronectin coatings on polar/hydrophobic/ionic polyurethanes: Altering surface interactions with human monocytes

Monocyte interactions with materials that are biofunctionalized with fibronectin (Fn) are of interest because of the documented literature which associates this protein with white blood cell function at implant sites. A degradable-polar hydrophobic ionic polyurethane (D-PHI), has been reported to promote an anti-inflammatory response from human monocytes. The aim of the current work was to study the influence of intrinsic D-PHI material chemistry on Fn adsorption (mono and multi-layer structures), and to investigate the influence of such chemistry on the structural state of the Fn, as well as the latter's influence on the activity of human monocytes on the protein coated substrates. Significant differences in Fn adsorption, surface hydrophobicity and the availability of defined peptide sequences (N terminal, C terminal or Cell Binding Domain) for the Fn in mono vs multilayer structures were observed as a function of the changes in intrinsic material chemistry. A D-PHI-formulated polyurethane substrate with subtle changes in anionic and hydrophobic domain content relative to the polar non-ionic urethane/carbonate groups within the polymer matrix promoted the lowest activation of monocytes, in the presence of multi-layer Fn constructs. These results highlight the importance of chemical heterogeneity as a design parameter for biomaterial surfaces, and establishes a desired strategy for controlling human monocyte activity at the surface of devices, when these are coated with multi-layer Fn structures. The latter is an important step towards functionalizing the materials with multi-layer protein drug carriers as interventional therapeutic agents.

STATEMENT OF SIGNIFICANCE

The control of the behavior of monocytes, especially migration and activation, is of crucial interest to modulate the inflammatory response at the site of implanted biomaterial. Several studies report the influence of adsorbed serum proteins on the behavior of monocytes on biomaterials. However, few studies show the influence of surface chemical group distribution on the controlled adsorption and the subsequent induced conformation- of mono versus multi-layer assembled structures generated from specific proteins implicated in wound repair. The current research considered the role of Fn adsorption and conformation in thin films while interacting with the intrinsic chemistry of segmented block polyurethanes; and the influence of the former on modulation and activation of human monocytes.

Synthesis of poly(l-lactide)/β-cyclodextrin/citrate network modified hydroxyapatite and its biomedical properties

PLA/β-CD/citrate network modified HA possesses a tailored surface and smaller particle size, thus showing great cell adhesion performance and osteoinductivity to the MSCs of Wistar rats.

Probing Cell Adhesion Profiles with a Microscale Adhesive Choice Assay

In this work, we introduce, to our knowledge, a new set of adhesion-based biomarkers for characterizing mammalian cells. Mammalian cell adhesion to the extracellular matrix influences numerous physiological processes. Current in vitro methods to probe adhesion focus on adhesive force to a single surface, which can investigate only a subcomponent of the adhesive, motility, and polarization cues responsible for adhesion in the 3D tissue environment. Here, we demonstrate a method to quantify the transhesive properties of cells that relies on the microscale juxtaposition of two extracellular matrix-coated surfaces. By multiplexing this approach, we investigate the unique transhesive profiles for breast cancer cells that are adapted to colonize different metastatic sites. We find that malignant breast cancer cells readily transfer to new collagen I surfaces, and away from basement membrane proteins. Integrins and actin polymerization largely regulate this transfer. This tool can be readily adopted in cell biology and cancer research to uncover, to our knowledge, novel drivers of adhesion (or de-adhesion) and sort cell populations based on complex phenotypes with physiological relevance.

Surface functionalization and dynamics of polymeric cell culture substrates

The promise of growing tissues to replace or improve the function of failing ones, a practice often referred to as regenerative medicine, has been driven in recent years by the development of stem cells and cell lines. Stem cells are typically cultured outside the body to increase cell number or differentiate the cells into mature cell types. In order to maximize the regenerative potential of these cells, there is a need to understand cell-material interactions that direct cell behavior and cell-material dynamics. Most synthetic surfaces used for growth and differentiation of cells in the lab are impractical and cost prohibitive in clinical labs. This review focuses on the modification of low cost polymer substrates that are already widely used for cell culture so that they may be used to control and understand cell-material interactions. In addition, we discuss the ability of cells to exert dynamic control over the microenvironment leading to a more complex, less controlled surface.

Changes in Cell Adhesiveness and Physicochemical Properties of Cross-Linked Albumin Films after Ultraviolet Irradiation

We discovered the unique cell adhesive properties of ultraviolet (UV)-irradiated albumin films. Albumin films prepared using a cross-linking reagent with epoxy groups maintained native albumin properties, such as resistance to cell adhesion. Interestingly, the cell adhesive properties of films varied depending upon the UV irradiation time; specifically, cell adhesiveness increased until 2 h of UV irradiation, when the cell number attached to the film was similar to that of culture dishes, and then cell adhesiveness decreased until 20 h of UV irradiation, after which the surface returned to the initial non-adhesive state. To elucidate the molecular mechanisms underlying this phenomenon, we examined the effect of UV irradiation on albumin film properties. The following changes occurred in response to UV irradiation: decreased α-helical structure, cleavage of albumin peptide bonds, and increased hydrophilicity and oxygen content of the albumin film surface. In addition, we found a positive correlation between the degree of cell adhesion and the amount of fibronectin adsorbed on the film. Taken together, UV-induced changes in films highly affect the amount of cell adhesion proteins adsorbed on the films depending upon the irradiation time, which determines cell adhesion behavior.

A facile construction of gradient micro-patterned OCP coatings on medical titanium for high throughput evaluation of biocompatibility

A facile construction of gradient micro-patterned octacalcium phosphate (OCP) coatings on titanium was developed for high-throughput screening of biocompatibility and bioactivity.

A comparison of adsorbed and grafted fibronectin coatings under static and dynamic conditions

Coatings for medical devices are expected to improve their surface biocompatibility mainly by being bioactive, i.e. stimulating healing-oriented interactions with living cells, tissues and organs.

On the potential for fibronectin/phosphorylcholine coatings on PTFE substrates to jointly modulate endothelial cell adhesion and hemocompatibility properties

The use of biomolecules as coatings on biomaterials is recognized to constitute a promising approach to modulate the biological response of the host. In this work, we propose a coating composed by 2 biomolecules susceptible to provide complementary properties for cardiovascular applications: fibronectin (FN) to enhance endothelialization, and phosphorylcholine (PRC) for its non thrombogenic properties. Polytetrafluoroethylene (PTFE) was selected as model substrate mainly because it is largely used in cardiovascular applications. Two approaches were investigated: 1) a sequential adsorption of the 2 biomolecules and 2) an adsorption of the protein followed by the grafting of phosphorylcholine via chemical activation. All coatings were characterized by immunofluorescence staining, X-Ray Photoelectron Spectroscopy and Scanning Electron Microscopy analyses. Assays with endothelial cells showed improvement on cell adhesion, spreading and metabolic activity on FN-PRC coatings compared with the uncoated PTFE. Platelets adhesion and activation were both reduced on the coated surfaces when compared with uncoated PTFE. Moreover, clotting time tests exhibited better hemocompatibility properties of the surfaces after a sequential adsorption of FN and PRC. In conclusion, FN-PRC coating improves cell adhesion and non-thrombogenic properties, thus revealing a certain potential for the development of this combined deposition strategy in cardiovascular applications.

Preferential adsorption of cell adhesive proteins from complex media on self-assembled monolayers and its effect on subsequent cell adhesion

We examined the effect of surface chemistry on adsorption of fibronectin (Fn) and vitronectin (Vn) and subsequent cell adhesion, employing self-assembled monolayers (SAMs) of alkanethiols carrying terminal methyl (CH3), hydroxyl groups (OH), carboxylic acid (COOH), and amine (NH2). More Fn and Vn adsorbed to COOH- and NH2-SAMs than to CH3- and OH-SAMs from a mixture with bovine serum albumin (BSA) and from 2% fetal bovine serum. Adhesion of human umbilical vein endothelial cells (HUVECs) on CH3- and OH-SAMs preadsorbed with Fn and BSA decreased with decreasing adsorbed Fn; however, HUVECs adhered to COOH- and NH2-SAMs even in the presence of BSA at 1000-fold more than Fn in a mixture because of the preferential adsorption of Fn and/or displacement of preadsorbed BSA with Fn and Vn in a serum-containing medium. SAMs coated with a mixture of Vn and BSA exhibited adhesion of HUVECs regardless of surface functional groups. A well-organized focal adhesion complex and actin stress fibers were observed only for COOH- and NH2-SAMs when SAMs were preadsorbed with Vn and BSA. These results suggest that COOH- and NH2-SAMs allow for both cell adhesion and cell spreading because of the high density of cell-binding domains derived from adsorbed Vn.

STATEMENT OF SIGNIFICANCE

Adsorption of cell adhesive proteins including fibronectin (Fn) and vitronectin (Vn) plays an important role in cell adhesion to artificial materials. However, for the development of biomaterials that contact with biological fluids, it is important to understand adsorption of Fn and Vn in complex media containing many kinds of proteins. Here, we focused on adsorption of Fn and Vn from complex media including mixed solution with albumin and fetal bovine serum, and its role on cell adhesion using self-assembled monolayers (SAMs). Our result demonstrates that SAMs carrying carboxylic acid or amine allow for both cell adhesion and cell spreading because of preferentially adsorbed Vn. The result provides insights into surface design of cell culture substrates and tissue engineering scaffolds.

Ureteral stents should be soaked for several minutes before placement

Purpose

Placement of ureteral stents (DJ-stents) may lead to complications. Inappropriate friction properties of the implant are, inter alia, made responsible for primary injuries, injury-related inflammation and a cascade of consecutive side effects. Hydrophilicity is considered to be related to low friction. The question arises, whether the various products on the market show their respective maximum hydrophilicity directly after unwrapping or a pre-use moistening, as already routinely done with the guide wire, is necessary.

Methods

The surface wettability of commercial and experimental DJ-stents was determined by water contact angle (WCA) measurements using the sessile drop method. One reference surface and 11 different stent surface types were tested. In order to determine the influence of moistening on the stents’ surface wettability, WCAs were measured twice, with dry, and soaked (30 min, 0.9%-NaCl) specimens. Each sample of a surface type was tested at three different positions to avoid effects of surface heterogeneities. Up to six samples of the same surface type were examined.

Results

Mean WCAs on fresh and soaked stent surfaces ranged from 75°–103° and 71°–99°. In every case the WCAs on soaked surfaces were lower. On average the WCAs decrease by 7%, the individual decreases differ considerably, from 2 to 16%. For 7/12 of the examined surface types, the decrease in contact angle is statistically significant with p ≤ 0.01.

Conclusions

DJ-stents freshly unwrapped show less hydrophilic properties compared to DJ-stents soaked in saline. To obtain maximum hydrophilicity at stent placement, DJ-stents should be soaked. The results may advocate a similar approach for other urological equipment.

Enhancing orthopedic implant bioactivity: refining the nanotopography

Advances in nanotechnology open up new possibilities to produce biomimetic surfaces that resemble the cell in vivo growth environment at a nanoscale level. Nanotopographical changes of biomaterials surfaces can positively impact the bioactivity and ossointegration properties of orthopedic and dental implants. This review introduces nanofabrication techniques currently used or those with high potential for use as surface modification of biomedical implants. The interactions of nanotopography with water, proteins and cells are also discussed, as they largely determine the final success of the implants. Due to the well-documented effects of surface chemistry and microtopography on the bioactivity of the implant, we here elaborate on the ability of the nanofabrication techniques to combine the dual (multi) modification of surface chemistry and/or microtopography.

Cooperative control of blood compatibility and re-endothelialization by immobilized heparin and substrate topography

A wide variety of environmental cues provided by the extracellular matrix, including biophysical and biochemical cues, are responsible for vascular cell behavior and function. In particular, substrate topography and surface chemistry have been shown to regulate blood and vascular compatibility individually. The combined impact of chemical and topographic cues on blood and vascular compatibility, and the interplay between these two types of cues, are subjects that are currently being explored. In the present study, a facile polydopamine-mediated approach is introduced for immobilization of heparin on topographically patterned substrates, and the combined effects of these cues on blood compatibility and re-endothelialization are systematically investigated. The results show that immobilized heparin and substrate topography cooperatively modulate anti-coagulation activity, endothelial cell (EC) attachment, proliferation, focal adhesion formation and endothelial marker expression. Meanwhile, the substrate topography is the primary determinant of cell alignment and elongation, driving in vivo-like endothelial organization. Importantly, combining immobilized heparin with substrate topography empowers substantially greater competitive ability of ECs over smooth muscle cells than each cue individually. Moreover, a model is proposed to elucidate the cooperative interplay between immobilized heparin and substrate topography in regulating cell behavior.

Adsorption of plasma proteins and fibronectin on poly(hydroxylethyl methacrylate) brushes of different thickness and their relationship with adhesion and migration of vascular smooth muscle cells

The surface-grafted poly(hydroxylethyl methacrylate) (PHEMA) molecules were demonstrated to show a brush state regardless of their molecular length (molecular weight). Adsorption of proteins from 10% fetal bovine serum (FBS), fibronectin (Fn) and bovine serum albumin (BSA) was quantified by ellipsometry, revealing that the amounts of FBS and Fn decreased monotonously along with the increase of PHEMA thickness, whereas not detectable for BSA when the PHEMA thickness was larger than 6 nm. Radio immunoassay found that the adsorption of Fn from 10% FBS had no significant difference regardless of the PHEMA thickness. However, ELISA results showed that the Arg-Gly-Asp (RGD) activity of adsorbed Fn decreased with the increase of PHEMA thickness. By comparison of cellular behaviors of vascular smooth muscle cells (VSMCs) being cultured in vitro in the normal serum-containing medium and the Fn-depleted serum-containing medium, the significant role of Fn on modulating the adhesion and migration of VSMCs was verified. Taking account all the results, the Fn adsorption model and its role on linking the biomaterials surface to the VSMCs behaviors are proposed.

Influence of boron addition to Ti-13Zr-13Nb alloy on MG63 osteoblast cell viability and protein adsorption

Cell proliferation, cell morphology and protein adsorption on near β-type Ti-13Zr-13Nb (TZN) alloy and Ti-13Zr-13Nb-0.5B (TZNB) composite have been investigated and compared to evaluate the effect of boron addition which has been added to the Ti alloy to improve their poor tribological properties by forming in situ TiB precipitates. MG63 cell proliferation on substrates with different chemistry but the same topography was compared. The MTT assay test showed that the cell viability on the TZN alloy was higher than the boron containing TZNB composite after 36 h of incubation and the difference was pronounced after 7 days. However, both the materials showed substantially higher cell attachment than the control (polystyrene). For the same period of incubation in fetal bovine serum (FBS), the amount of protein adsorbed on the surface of boron free TZN samples was higher than that in the case of boron containing TZNB composite. The presence of boron in the TZN alloy influenced protein adsorption and cell response and they are lower in TZNB than in TZN as a result of the associated difference in chemical characteristics.

Latham J, G. Dunlop D, Oreffo RO. Bone and metal: an orthopaedic perspective on osseointegration of metals

The area of implant osseointegration is of major importance, given the predicted significant rise in the number of orthopaedic procedures and an increasingly ageing population. Osseointegration is a complex process involving a number of distinct mechanisms affected by the implant bulk properties and surface characteristics. Our understanding and ability to modify these mechanisms through alterations in implant design is continuously expanding. The following review considers the main aspects of material and surface alterations in metal implants, and the extent of their subsequent influence on osseointegration. Clinically, osseointegration results in asymptomatic stable durable fixation of orthopaedic implants. The complexity of achieving this outcome through incorporation and balance of contributory factors is highlighted through a clinical case report.

Electrochemical modulation of plasma fibronectin surface conformation enables filament formation and control of endothelial cell–surface interactions

Electrochemical modulation of a gold surface charge induces conformational changes in fibronectin when immobilized on the surface. A negatively-charged surface yields an open and filamentous fibronectin which significantly improves endothelial cell adhesion.

Modulation of protein adsorption, vascular cell selectivity and platelet adhesion by mussel-inspired surface functionalization

The “surface property–protein adsorption–cell behavior” relationship of polydopamine was investigated and the mechanism of polydopamine selectively modulating vascular cell behavior was explored.

Peptide-modified conducting polymer as a biofunctional surface: monitoring of cell adhesion and proliferation

A designed bio-functional surface is a promising candidate forcell-culture-on-a-chipapplications.

Interactions between inorganic and organic phases in bone tissue as a source of inspiration for design of novel nanocomposites

Mimicking the nanostructure of bone and understanding the interactions between the nanoscale inorganic and organic components of the extracellular bone matrix are crucial for the design of biomaterials with structural properties and a functionality similar to the natural bone tissue. Generally, these interactions involve anionic and/or cationic functional groups as present in the organic matrix, which exhibit a strong affinity for either calcium or phosphate ions from the mineral phase of bone. This study reviews the interactions between the mineral and organic extracellular matrix components in bone tissue as a source of inspiration for the design of novel nanocomposites. After providing a brief description of the various structural levels of bone and its main constituents, a concise overview is presented on the process of bone mineralization as well as the interactions between calcium phosphate (CaP) nanocrystals and the organic matrix of bone tissue. Bioinspired synthetic approaches for obtaining nanocomposites are subsequently addressed, with specific focus on chemical groups that have affinity for CaPs or are involved in stimulating and controlling mineral formation, that is, anionic functional groups, including carboxyl, phosphate, sulfate, hydroxyl, and catechol groups.

Effect of 3D microgroove surface topography on plasma and cellular fibronectin of human gingival fibroblasts

OBJECTIVES

Fibronectin (FN), an extracellular matrix (ECM) glycoprotein, is a key factor in the compatibility of dental implant materials. Our objective was to determine the optimal dimensions of microgrooves in the transmucosal part of a dental implant, for optimal absorption of plasma FN and expression of cellular FN by human gingival fibroblasts (HGFs).

METHODS

Microgroove titanium surfaces were fabricated by photolithography with parallel grooves: 15μm, 30μm, or 60μm in width and 5μm or 10μm in depth. Smooth titanium surfaces were used as controls. Surface hydrophilicity, plasma FN adsorption and cellular FN expression by HGFs were measured for both microgroove and control samples.

RESULTS

We found that narrower and deeper microgrooves amplified surface hydrophobicity. A 15-μm wide microgroove was the most hydrophobic surface and a 60-μm wide microgroove was the most hydrophilic. The latter had more expression of cellular FN than any other surface, but less absorption of plasma FN than 15-μm wide microgrooves. Variation in microgroove depth did not appear to effect FN absorption or expression unless the groove was narrow (∼15 or 30μm). In those instances, the shallower depths resulted in greater expression of cellular FN.

CONCLUSIONS

Our microgrooves improved expression of cellular FN, which functionally compensated for plasma FN. A microgroove width of 60μm and depth of 5 or 10μm appears to be optimal for the transmucosal part of the dental implant.

Fabrication of functional fibronectin patterns by nanosecond excimer laser direct write for tissue engineering applications

Laser direct write techniques represent a prospective alternative for engineering a new generation of hybrid biomaterials via the creation of patterns consisting of biological proteins onto practically any type of substrate. In this paper we report on the characterization of fibronectin features obtained onto titanium substrates by UV nanosecond laser transfer. Fourier-transform infrared spectroscopy measurements evidenced no modification in the secondary structure of the post-transferred protein. The molecular weight of the transferred protein was identical to the initial fibronectin, no fragment bands being found in the transferred protein's Western blot migration profile. The presence of the cell-binding domain sequence and the mannose groups within the transferred molecules was revealed by anti-fibronectin monoclonal antibody immunolabelling and FITC-Concanavalin-A staining, respectively. The in vitro tests performed with MC3T3-E1 osteoblast-like cells and Swiss-3T3 fibroblasts showed that the cells' morphology and spreading were strongly influenced by the presence of the fibronectin spots.

Preparation of cell-culturing glass surfaces that release branched polyethyleneimine triggered by thiol-disulfide exchange

To develop a chemical stimulus-responsive substrate for culturing cells, polyethyleneimine (PEI) having a pyridyl disulfide moiety was attached via disulfide linkages to a glass coverslip modified with a silane coupling agent having a thiol group. The surface modification was confirmed by X-ray photoelectron spectroscopy and zeta potential analysis. The obtained surface exhibited sufficiently high cell adhesiveness. Zeta potential measurements revealed that the PEI derivatives were released from the surface through thiol-disulfide exchange when the modified glass coverslip was immersed in a neutral pH buffer containing cysteine. The cell viability assay demonstrated that this chemical stimulus was substantially nontoxic to 293T cells. Because PEI is a widely used transfection reagent, this functional glass coverslip would be potentially useful as an experimental platform for reverse transfection.

The endothelialization and hemocompatibility of the functional multilayer on titanium surface constructed with type IV collagen and heparin

The type IV collagen/heparin (IVCol/Hep) multilayer was developed on amino-silanized titanium (Ti) surface layer by layer self-assembly. Ti, TiOH, TiOHA and TiOHA(HC)3H were characterized by Fourier transform infrared spectroscopy (FTIR), water contact angle measurements and scanning electron microscopy (SEM), respectively. Alcian Blue 8GX staining and immunofluorescence staining were used to characterize the heparin (Hep) and type IV collagen (IVCol), respectively. The blood compatibilities of Ti and the treated Ti were evaluated by platelet adhesion test and clotting time using PRP. Blood compatibility tests reveal that the assembled functional multilayer displayed less platelets adhesion and prolonged APTTs time compared with the controlled Ti. Endothelial cells (ECs) culture results showed more attached and proliferated ECs on the TiOHA(HC)3H than that on Ti, especially compared with that on TiOH and TiOHA. Thus, the assembled Hep and IVCol multilayer can improve the cell compatibility and the blood compatibility. We anticipate that this IVCol/Hep functional multilayer will be beneficial to enhance the biocompatibility of the Ti-based biomaterial devices.

Extracellular matrix protein adsorption to phosphate-functionalized gels from serum promotes osteogenic differentiation of human mesenchymal stem cells

One of the primary goals for tissue engineering is to induce new tissue formation by stimulating specific cell function. Human mesenchymal stem cells (hMSCs) are a particularly important cell type that has been widely studied for differentiation down the osteogenic (bone) lineage, and we recently found that simple phosphate functional groups incorporated into poly(ethylene glycol) (PEG) hydrogels could induce osteogenesis without using differentiation medium by unknown mechanisms. Here, we aimed to determine whether direct or indirect cell/materials interactions were responsible for directing hMSCs down the osteogenic lineage on phosphate (PO(4))-functionalized PEG hydrogels. Our results indicated that serum components adsorbed onto PO(4)-PEG hydrogels from medium in a presoaking step were sufficient for attachment and spreading of hMSCs, even when seeded in serum-free conditions. Blocking antibodies for collagen and fibronectin (targeted to the hydrogel), as well as β1 and β3 integrin blocking antibodies (targeted to the cells), each reduced attachment of hMSCs to PO(4)-PEG hydrogels, suggesting that integrin-mediated interactions between cells and adsorbed matrix components facilitate attachment and spreading. Outside-in signaling, and not merely shape change, was found to be required for osteogenesis, as alkaline phosphatase activity and expression of CBFA1, osteopontin and collagen-1 were each significantly down regulated upon inhibition of focal adhesion kinase phosphorylation even though the focal adhesion structure or cell shape was unchanged. Our results demonstrate that complex function (i.e. osteogenic differentiation) can be controlled using simple functionalization strategies, such as incorporation of PO(4), but that the role of these materials may be due to more complex influences than has previously been appreciated.

Preservation of Capillary-beds in Rat Lung Tissue Using Optimized Chemical Decellularization

Promoting regeneration using scaffolds created by decellularizing native tissue is becoming a popular technique applied to a variety of tissues. We demonstrate a method to decellularize highly vascular tissue keeping the vascular structure intact down to the capillary scale. Using vascular corrosion casting (VCC), we created a method for quantitatively assessing the functionality of vascular extracellular matrix (ECM) following decellularization. Murine lung tissue was decellularized using a number of techniques, then characterized using standard histological methods, as well as our quantitative VCC (qVCC) technique. Using an optimized acellular method, we successfully decellularized lung tissue while leaving behind a patent vascular network based on qualitative and quantitative histological methods.

Strategy to introduce an hydroxyapatite-keratin nanocomposite into a fibrous membrane for bone tissue engineering

An hydroxyapatite (HA)-keratin nanocomposite was introduced into an electrospun poly(l-lactic acid) (PLLA) fibrous membrane with good electrospinnability. Biological in vitro cell culture demonstrated that the incorporation of HA-keratin into PLLA fibers led to significant bone formation compared to that of the pure electrospun PLLA membrane.

Engineering cell-material interfaces for long-term expansion of human pluripotent stem cells

Cost-effective and scalable synthetic matrices that support long-term expansion of human pluripotent stem cells (hPSCs) have many applications, ranging from drug screening platforms to regenerative medicine. Here, we report the development of a hydrogel-based matrix containing synthetic heparin-mimicking moieties that supports the long-term expansion of hPSCs (≥20 passages) in a chemically defined medium. HPSCs expanded on this synthetic matrix maintained their characteristic morphology, colony forming ability, karyotypic stability, and differentiation potential. We also used the synthetic matrix as a platform to investigate the effects of various physicochemical properties of the extracellular environment on the adhesion, growth, and self-renewal of hPSCs. The observed cellular responses can be explained in terms of matrix interface-mediated binding of extracellular matrix proteins, growth factors, and other cell-secreted factors, which create an instructive microenvironment to support self-renewal of hPSCs. These synthetic matrices, which comprise of "off-the-shelf" components and are easy to synthesize, provide an ideal tool to elucidate the molecular mechanisms that control stem cell fate.

Non-monotonic cell differentiation pattern on extreme wettability gradients

In this study, we propose a methodology to obtain a family of biomimetic substrates with a hierarchical rough topography at the micro and nanoscale that span the entire range of wettability, from the superhydrophobic to the superhydrophilic regime, through an Ar-plasma treatment at increasing durations. Moreover, we employ the same approach to produce a superhydrophobic-to-superhydrophilic surface gradient along centimetre-length scale distances within the same sample. We characterize the biological activity of these surfaces in terms of protein adsorption and cell response, using fibronectin, a major component of the extracellular matrix, and C2C12 cells, a myoblast cell line. Fibronectin conformation, assessed via binding of the monoclonal antibody HFN7.1, exhibits a non-monotonic dependence on surface wettability, with higher activity on hydrophilic substrates (WCA = 38.6 ± 8.1°). On the other hand, the exposition of cell-binding epitopes is diminished on the surfaces with extreme wetting properties, the conformation being particularly altered on the superhydrophobic substrate. The assessment of cell response via the myogenic differentiation process reveals that a gradient surface promotes a different response with respect to cells cultured on discrete uniform samples: even though in both cases the same non-monotonic differentiation pattern is found, the differential response to the various wettabilities is enhanced along the gradient while the overall levels of differentiation are diminished. On a gradient surface cells are in fact exposed to a range of continuously changing stimuli that foster cell migration and detain the differentiation process.

Significance of nano- and microtopography for cell-surface interactions in orthopaedic implants

Cell-surface interactions play a crucial role for biomaterial application in orthopaedics. It is evident that not only the chemical composition of solid substances influence cellular adherence, migration, proliferation and differentiation but also the surface topography of a biomaterial. The progressive application of nanostructured surfaces in medicine has gained increasing interest to improve the cytocompatibility and osteointegration of orthopaedic implants. Therefore, the understanding of cell-surface interactions is of major interest for these substances. In this review, we elucidate the principle mechanisms of nano- and microscale cell-surface interactions in vitro for different cell types onto typical orthopaedic biomaterials such as titanium (Ti), cobalt-chrome-molybdenum (CoCrMo) alloys, stainless steel (SS), as well as synthetic polymers (UHMWPE, XLPE, PEEK, PLLA). In addition, effects of nano- and microscaled particles and their significance in orthopaedics were reviewed. The significance for the cytocompatibility of nanobiomaterials is discussed critically.

Degradable segmented polyurethane elastomers for bone tissue engineering: effect of polycaprolactone content

Segmented polyurethanes (PURs), consisting of degradable poly(a-hydroxy ester) soft segments and aminoacid-derived chain extenders, are biocompatible elastomers with tunable mechanical and degradative properties suitable for a variety of tissue-engineering applications. In this study, a family of linear PURs synthesized from poly(ϵ-caprolactone) (PCL) diol, 1,4-diisocyanobutane and tyramine with theoretical PCL contents of 65-80 wt% were processed into porous foam scaffolds and evaluated for their ability to support osteoblastic differentiation in vitro. Differential scanning calorimetry and mechanical testing of the foams indicated increasing polymer crystallinity and compressive modulus with increasing PCL content. Next, bone marrow stromal cells (BMSCs) were seeded into PUR scaffolds, as well as poly(lactic-co-glycolic acid) (PLGA) scaffolds, and maintained under osteogenic conditions for 14 and 21 days. Analysis of cell number indicated a systematic decrease in cell density with increasing PUR stiffness at both 14 and 21 days in culture. However, at these same time points the relative mRNA expression for the bone-specific proteins osteocalcin and the growth factors bone morphogenetic protein-2 and vascular endothelial growth factor gene expression were similar among the PURs. Finally, prostaglandin E2 production, alkaline phosphatase activity and osteopontin mRNA expression were highly elevated on the most-crystalline PUR scaffold as compared to the PLGA and PUR scaffolds. These results suggest that both the modulus and crystallinity of the PUR scaffolds influence cell proliferation and the expression of osteoblastic proteins.

Denaturation of proteins near polar surfaces

All-atom molecular dynamics simulations for proteins placed near a model mica surface indicate existence of two types of evolution. One type leads to the surface-induced unfolding and the other just to a deformation. The two behaviors are characterized by distinct properties of the radius of gyration and of a novel distortion parameter that distinguishes between elongated, globular, and planar shapes. They also differ in the nature of their single site diffusion and two-site distance fluctuations. The four proteins chosen for the studies, the tryptophan cage, protein G, hydrophobin and lyzozyme, are small to allow for a fair determination of the forces generated by the surface as the effects of finite cutoffs in the Coulombic interactions are thus minimized. When the net charge on the surface is set to zero artificially, infliction of deformation is seen to persists but no unfolding takes place. Unfolding may also be prevented by a cluster of disulfide bonds, as we observe in simulations of hydrophobin.

The biological response of poly(L-lactide) films modified by different biomolecules: role of the coating strategy

The interactions between the surface of synthetic scaffolds and cells play an important role in tissue engineering applications. To improve these interactions, two strategies are generally followed: surface coating with large proteins and surface grafting with small peptides. The proteins and peptides more often used and derived from the extracellular matrix, are fibronectin, laminin, and their active peptides, RGD and SIKVAV, respectively. The aim of this work was to compare the effects of coating and grafting of poly(L-lactide) (PLLA) films on MRC5 fibroblast cells. Grafting reactions were verified by X-ray photoelectron spectroscopy. Cell adhesion and proliferation on coated and grafted PLLA surfaces were measured by cell counting. Vinculin localization and distribution were performed on cell cultured on PLLA samples using a fluorescence microscopy technique. Finally, western blot was performed to compare signals of cell adhesion proteins, such as vinculin, Rac1, and RhoA, as well as cell proliferation, such as PCNA. These tests showed similar results for fibronectin and laminin coated PLLA, while RGD grafting is more effective compared with SIKVAV grafting. Considering the overall view of these results, although coating and grafting can both be regarded as effective methods for surface modification to enhance cell adhesion and proliferation on a biomaterial, RGD grafted PLLA show better cell adhesion and proliferation than coated PLLA, while SIKVAV grafted PLLA show similar adhesion but worse proliferation. These data verified different biological effects depending on the surface modification method used.