Characterization of pH-responsive hydrogels of poly(itaconic acid-g-ethylene glycol) prepared by UV-initiated free radical polymerization as biomaterials for oral delivery of bioactive agents

Oral natural material hydrogels: a new strategy for enhancing oral drug delivery efficiency

Oral administration, owing to its high patient compliance and favorable controllability, is widely employed in clinical settings; however, the efficacy is often constrained by the gastrointestinal environment's impact on bioavailability. As the demand for biocompatibility and biodegradability in biomedical applications intensifies, natural hydrogel-based oral drug delivery systems have gained substantial attention as promising carriers. In this study, we introduce a variety of natural materials, revealing their advantages in enhancing drug bioavailability and targeting capabilities. Through both physical and chemical crosslinking mechanisms, we successfully demonstrate hydrogels exhibiting excellent mechanical properties and biocompatibility. Furthermore, we analyze the potential applications of diverse natural oral hydrogels across fields such as gastrointestinal, metabolic, oncological, and immunotherapeutic diseases. By synthesizing recent advances in this area, we aim to elucidate the critical role these systems can play in biomedicine. Our findings suggest that natural materials possess broad prospects in drug delivery, advocating for continued exploration of their clinical application to facilitate the development and optimization of novel oral therapeutic modalities. This work provides a vital theoretical foundation and practical guidance for future innovations in drug delivery technologies.

Fabrication of Functional Polymers with Gradual Release of a Bioactive Precursor for Agricultural Applications

Biodegradable and biocompatible polymeric materials and stimulus-responsive hydrogels are widely used in the pharmaceutical, agricultural, biomedical, and consumer sectors. The effectiveness of these formulations depends significantly on the appropriate selection of polymer support. Through chemical or enzymatic hydrolysis, these materials can gradually release bioactive agents, enabling controlled drug release. The objective of this work is to synthesize, characterize, and apply two controlled-release polymeric systems, focusing on the release of a phyto-pharmaceutical agent (herbicide) at varying pH levels. The copolymers were synthesized via free radical polymerization in solution, utilizing tetrahydrofuran (THF) as the organic solvent and benzoyl peroxide (BPO) as the initiator, without the use of a cross-linking agent. Initially, the herbicide was grafted onto the polymeric chains, and its release was subsequently tested across different pH environments in a heterogeneous phase using an ultrafiltration (UF) system. The development of these two controlled-release polymer systems aimed to measure the herbicide's release across different pH levels. The goal is to adapt these materials for agricultural use, enhancing soil quality and promoting efficient water usage in farming practices. The results indicate that the release of the herbicide from the conjugate systems exceeded 90% of the bioactive compound after 8 days at pH 10 for both systems. Furthermore, the two polymeric systems demonstrated first-order kinetics for herbicide release in aqueous solutions at different pH levels. The kinetic constant was found to be higher at pH 7 and 10 compared to pH 3. These synthetic hydrogels are recognized as functional polymers suitable for the sustained release of herbicides in agricultural applications.

Structure regulation of oxidized soybean cellulose nanocrystals/poly-acrylamide hydrogel and its application potential in wound dressing

The development of functional dressings based on natural polysaccharide-based hydrogels remains a great challenge, and the specific roles of gel composition and drug-controlled release mechanisms were unclear. In this study, oxidized soybean cellulose nanocrystals (CNCs)/poly-acrylamide (PAM) hydrogel was prepared. The proportion of CNCs, crosslinkers, and water in the system was regulated to fine-tune the rheological performances, texture properties, transparency, and micro-network structures of CNCs/PAM hydrogel, and further explored its application potential in the field of wound dressings. It was found that CNCs improved the rigidity and adhesion of hydrogels, crosslinkers improved the network density, and water promoted the softening and fluidity of hydrogels. The effective filling of CNCs in the composite hydrogel was verified by FTIR, XRD, and NMR. Furthermore, the pH responsiveness and drug-loading potential of the smart hydrogel were tested by swelling and drug-controlled release experiments, elucidating drug-release dynamic mechanisms during the wound healing process. The inhibition zones (>7 mm) of gram-positive/negative bacteria and cell viability (>100 %) assay showed satisfactory biocompatibility, as the hydrogel effectively accelerated wound healing in a wound model. These results elucidated the regulation mechanism of the structures of CNCs/PAM hydrogel and revealed the application potential of CNCs/PAM hydrogel in wound dressings.

Development and characterization of pH-responsive Delonix regia/mucin co-poly (acrylate) hydrogel for controlled drug delivery of metformin HCl

This study introduces a pH-responsive hydrogel developed from Delonix regia and mucin co-poly(acrylate) through free radical polymerization to enhance controlled drug delivery systems. Characterization using FTIR, DSC, TGA, SEM, PXRD, and EDX spectroscopy detailed the hydrogel's amorphous and crystalline structures, thermal stability, surface characteristics, and elemental composition. Tested at a pH of 7.4-mimicking intestinal conditions-the hydrogel demonstrated significant swelling, indicating its capability for targeted drug release. With Metformin HCl as a model drug, the hydrogel exhibited a promising sustained release profile, underscoring its potential for oral administration. Safety and biocompatibility were assessed through acute oral toxicity studies in albino rabbits, encompassing biochemical, hematological, and histopathological evaluations. X-ray imaging confirmed the hydrogel's navigability through the gastrointestinal tract, affirming its application in drug delivery. By potentially mitigating gastrointestinal side effects, enhancing patient compliance, and improving therapeutic efficacy, this Delonix regia/mucin co-poly(acrylate) hydrogel represents a step in pharmaceutical sciences, exploring innovative materials and methodologies for drug delivery.

Sustainable aerogels based on biobased poly (itaconic acid) for adsorption of cationic dyes

This work reports the synthesis of poly (itaconic acid) by thermal polymerization mediated by 2,2'-Azobis(2-methylpropionamidine) dihydrochloride. Furthermore, physical hydrogels were prepared by using high molecular weight poly (itaconic acid) characterized by low dispersity and laponite RD. The hydrogels presented porous 3D network structures, with a high-water penetration of almost 2000 g/g of swelling ratio, which can allow the adsorption sites of both poly (itaconic acid) and laponite RD to be easily exposed and facilitate the adsorption of dyes. The water adsorption followed Schott's pseudo-second-order model. The mechanism of the adsorption process was investigated using 1H and 31P NMR. The hydrogel is able to fast adsorb by a combination of electrostatic interactions and hydrogen bonding by the synergic effect of the clay and poly (itaconic acid). Moreover, the prepared aerogels exhibited a fast removal of Basic Fuchsin, with an adsorption capacity of 67.56 mg/g and a high removal efficiency (~99 %). The adsorption followed the pseudo-second-order kinetic model and Langmuir isotherm model. Furthermore, the thermodynamic parameters showed that the BF process of adsorption was spontaneous and feasible, endothermic, and followed physisorption. These results indicated that the PIA/laponite-based aerogel can be considered a promising adsorbent material in textile wastewater treatment.

Engineering Single-Component Antibacterial Anti-inflammatory Polyitaconate-Based Hydrogel for Promoting Methicillin-Resistant Staphylococcus aureus-Infected Wound Healing and Skin Regeneration

Hydrogel wound dressings play a crucial role in promoting the healing of drug-resistant bacterially infected wounds. However, their clinical application often faces challenges such as the use of numerous components, a complicated preparation process, and insufficient biological activity. Itaconic acid, known for its excellent biological and reaction activities, has not been extensively studied for the preparation of itaconic acid-based hydrogels and their application in infected wound healing. Therefore, there is a need to develop a multifunctional single-component itaconic acid-based hydrogel that is easy to synthesize and holds promising prospects for clinical use in promoting the healing of infected wounds. In this study, we present a single-component polyitaconate-based hydrogel (PICGI) with antibacterial, anti-inflammatory, and biological activity. The PICGI hydrogel demonstrates great potential in promoting healing of infected wounds and skin regeneration. It exhibits desirable thermosensitive, injectable, and adhesive properties, as well as broad-spectrum antibacterial activity and anti-inflammatory effects. Furthermore, the PICGI hydrogel is biocompatible and significantly enhances the migration and tube formation of endothelial cells. In the case of drug-resistant bacterially infected wounds, the PICGI hydrogel effectively inhibits bacterial infection and inflammation, promotes angiogenesis, and facilitates collagen deposition, thereby accelerating the healing and regeneration of the skin. This study highlights the promising application of the PICGI hydrogel as a single-component hydrogel in tissue repair associated with bacterial infection and inflammation. Moreover, the simplicity of its components, convenient preparation process, and sufficient biological activity make the PICGI hydrogel highly suitable for promotion and clinical application.

Preparation, Swelling, and Drug Release Studies of Chitosan-based Hydrogels for Controlled Delivery of Buspirone Hydrochloride

BACKGROUND

Buspirone is used for the management of depression and anxiety disorders. Due to its short half-life and low bioavailability, it requires multiple daily doses and is associated with some side effects.

AIM

This study aimed to develop chitosan-based hydrogels as drug-controlled release carriers.

OBJECTIVE

The objective of this study is to prepare chitosan-based hydrogels as controlled release carriers in order to overcome the side effects of buspirone HCl and improve patients' compliance and their life quality.

METHODS

Polymer chitosan was polymerized with two monomers, acrylic acid and itaconic acid, to synthesize pH-sensitive hydrogel. The Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis were performed to confirm the structure formation and thermal stability. Water penetration capability and loading of the drug were performed by porosity and drug loading studies. The swelling and dissolution tests were performed to analyze the pH-sensitive nature of the developed hydrogels.

RESULTS

FTIR, TGA, and DSC demonstrated that the chitosan-based hydrogels were successfully prepared. An increase in water penetration and drug loading into the hydrogel network was seen with the high incorporation of chitosan, acrylic acid, and itaconic acid. The swelling and dissolution studies revealed that prepared hydrogel offered the greatest swelling and drug release at a high pH of 7.4. The swelling and drug release from the hydrogel were affected by the concentrations of the incorporated contents. A controlled release of the drug was achieved by using chitosan-based hydrogel as a delivery carrier compared to commercial tablets of buspirone.

CONCLUSION

The results showed that the developed chitosan-based hydrogel can be considered one of the most suitable drug carrier systems for the controlled delivery of buspirone.

Fluorene intercalated graphene oxide based CoQ10 imprinted polymer composite as a selective platform for electrochemical sensing of CoQ10

The new objective of sustainable analytical chemistry is to develop validated robust, swift, simple and highly sensitive analytical methods that are based on cost effective sensing technology. Therefore, in this study the electro-chemical detection of coenzyme Q10 (CoQ10) was achieved using a fluorene intercalated graphene oxide based CoQ10 imprinted polymer composite modified glassy carbon electrode (CoQ10-IGOPC/GCE). The synthesized sensing material was characterized using SEM, XRD and FT-IR to determine the morphology and functional properties. The CoQ10-IGOPC/GCE was characterized by EIS for its electrochemical properties. CoQ10 was detected selectively using Differential Pulse Voltammetry (DPV). Under ideal circumstances, a linear calibration curve with a correlation coefficient (R ²) of 0.991 was produced in the concentration range of 0.0967 to 28.7 μM. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 0.029 and 0.0967 μM, respectively. Furthermore, the proposed electrochemical sensor was extremely selective, accurate and thoroughly validated with RSD values less than 5%. The developed CoQ10-IGOPC/GCE based electrochemical sensor was successfully used for the detection of CoQ10 in samples of fruits, vegetables, nuts, human blood serum and pharmaceuticals. The CoQ10-IGOPC/GCE based electrochemical method showed good percent recoveries ranging from 94 to 103 percent.

Recent Development of Atmospheric Water Harvesting Materials: A Review

The lack of freshwater has been threatening many people who are living in Africa, the Middle East, and Oceania, while the discovery of freshwater harvesting technology is considered a promising solution. Recent advances in structured surface materials, metal-organic frameworks, hygroscopic inorganic compounds (and derivative materials), and functional hydrogels have demonstrated their potential as platform technologies for atmospheric water (i.e., supersaturated fog and unsaturated water) harvesting due to their cheap price, zero second energy requirement, high water capture capacity, and easy installation and operation compared with traditional water harvesting methods, such as long-distance water transportation, seawater desalination, and electrical dew collection devices in rural areas or individual-scale emergent usage. In this contribution, we highlight recent developments in functional materials for "passive" atmospheric water harvesting application, focusing on the structure-property relationship (SPR) to illustrate the transport mechanism of water capture and release. We also discuss technical challenges in the practical applications of the water harvesting materials, including low adaptability in a harsh environment, low capacity under low humidity, self-desorption, and insufficient solar-thermal conversion. Finally, we provide insightful perspectives on the design and fabrication of atmospheric water harvesting materials.

β-Lactamase-Responsive Hydrogel Drug Delivery Platform for Bacteria-Triggered Cargo Release

Antibiotic resistance is a growing public health threat that complicates the treatment of infections. β-Lactamase enzymes, which hydrolyze the β-lactam ring present in many common antibiotics, are a major cause of this resistance and are produced by a broad range of bacterial pathogens. Here, we developed hydrogels that degrade specifically in the presence of β-lactamases and β-lactamase-producing bacteria as a platform for bacteria-triggered drug delivery. A maleimide-functionalized β-lactamase-cleavable cephalosporin was used as a crosslinker in the fabrication of hydrogels through end-crosslinked polymerization with multiarm thiol-terminated poly(ethylene glycol) macromers via Michael-type addition. We demonstrated that only hydrogels containing the responsive crosslinker were degraded by β-lactamases and β-lactamase-producing bacteria in vitro and in an ex vivo porcine skin infection model. Fluorescent polystyrene nanoparticles, encapsulated in the hydrogels as model cargo, were released at rates that closely tracked hydrogel wet mass loss, confirming β-lactamase-triggered controlled cargo release. Nonresponsive hydrogels, lacking the β-lactam crosslinker, remained stable in the presence of β-lactamases and β-lactamase-producing bacteria and exhibited no change in mass or nanoparticle release. Furthermore, the responsive hydrogels remained stable in non-β-lactamase enzymes, including collagenases and lipases. These hydrogels have the potential to be used as a bacteria-triggered drug delivery system to control unnecessary exposure to encapsulated antimicrobials, which can provide effective infection treatment without exacerbating resistance.

Formulation, Characterization, and In Vitro Drug Release Study of β-Cyclodextrin-Based Smart Hydrogels

In this study, novel pH-responsive polymeric β-cyclodextrin-graft-poly(acrylic acid/itaconic acid) hydrogels were fabricated by the free radical polymerization technique. Various concentrations of β-cyclodextrin, acrylic acid, and itaconic acid were crosslinked by ethylene glycol dimethacrylate in the presence of ammonium persulfate. The crosslinked hydrogels were used for the controlled delivery of theophylline. Loading of theophylline was conducted by the absorption and diffusion method. The fabricated network of hydrogel was evaluated by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffractometry (XRD), and scanning electron microscopy (SEM). The crosslinking among hydrogel contents and drug loading by the fabricated hydrogel were confirmed by FTIR analysis, while TGA indicated a high thermal stability of the prepared hydrogel as compared to pure β-cyclodextrin and itaconic acid. The high thermal stability of the developed hydrogel indicated an increase in the thermal stability of β-cyclodextrin and itaconic acid after crosslinking. Similarly, a decrease in crystallinity of β-cyclodextrin and itaconic acid was observed after crosslinking, as evaluated by XRD analysis. SEM revealed an irregular and hard surface of the prepared hydrogel, which may be correlated with strong crosslinking among hydrogel contents. Crosslinked insoluble and uncrosslinked soluble fractions of hydrogel were evaluated by sol–gel analysis. An increase in gel fraction was seen with the increase in compositions of hydrogel contents, while a decrease in sol fraction was observed. Dynamic swelling and dissolution studies were performed in three various buffer solutions of pH 1.2, 4.6, and 7.4, respectively. Maximum swelling and drug release were observed at higher pH values as compared to the lower pH value due to the deprotonation and protonation of functional groups of the hydrogel contents; thus, the pH-sensitive nature of the fabricated hydrogel was demonstrated. Likewise, water penetration capability and polymer volume were evaluated by porosity and polymer volume studies. Increased incorporation of β-cyclodextrin, acrylic acid, and itaconic acid led to an increase in swelling, drug release, drug loading, and porosity of the fabricated hydrogel, whereas a decrease was detected with the increasing concentration of ethylene glycol dimethacrylate. Conclusively, the prepared hydrogel could be employed as a suitable and promising carrier for the controlled release of theophylline.

Bioinspired tunable hydrogels: An update on methods of preparation, classification, and biomedical and therapeutic applications

Hydrogels exhibit water-insoluble three-dimensional polymeric networks capable of absorbing large amounts of biological fluids. Both natural and synthetic polymers are used for the preparation of hydrogel networks. Such polymeric networks are fabricated through chemical or physical mechanisms of crosslinking. Chemical crosslinking is accomplished mainly through covalent bonding, while physical crosslinking involves self-healing secondary forces like H-bonding, host-guest interactions, and antigen-antibody interactions. The building blocks of the hydrogels play an important role in determining the mechanical, biological, and physicochemical properties. Hydrogels are used in a variety of biomedical applications like diagnostics (biodetection and bioimaging), delivery of therapeutics (drugs, immunotherapeutics, and vaccines), wound dressing and skin materials, cardiac complications, contact lenses, tissue engineering, and cell culture because of the inherent characteristics like enhanced water uptake and structural similarity with the extracellular matrix (ECM). This review highlights the recent trends and advances in the roles of hydrogels in biomedical and therapeutic applications. We also discuss the classification and methods of hydrogels preparation. A brief outlook on the future directions of hydrogels is also presented.

Polymer Networks for Enrichment of Calcium Ions

In this study, solvogels containing (2-((2-(ethoxycarbonyl)prop-2-en-1-yl)oxy)-ethyl) phosphonic acid (ECPA) and N,N′-diethyl-1,3-bis-(acrylamido)propane (BNEAA) as the crosslinker are synthesized by UV induced crosslinking photopolymerization in various solvents. The polymerization of the ECPA monomer is monitored by the conversion of double bonds with in situ attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. The morphology of the networks is characterized by in situ photorheology, solid state NMR spectroscopy, and scanning electron microscopy (SEM) of the dried gels. It is demonstrated that the storage modulus is not only determined by the crosslinker content in the gel, but also by the solvent used for preparation. The networks turn out to be porous structures with G′ being governed by a rigid, phase-separated polymer phase rather than by entropic elasticity. The external and internal pK_a values of the poly(ECPA-co-BNEAA) gels were determined by titration with a specially designed method and compared to the calculated values. The polymer-immobilized phosphonic acid groups in the hydrogels induce buffering behavior into the system without using a dissolved buffer. The calcium accumulation in the gels is studied by means of a double diffusion cell filled with calcium ion-containing solutions. The successful accumulation of hydroxyapatite within the gels is shown by a combination of SEM, energy-dispersive X-ray spectroscopy (EDX) and wide-angle X-ray scattering (WAXS).

pH-Responsive Succinoglycan-Carboxymethyl Cellulose Hydrogels with Highly Improved Mechanical Strength for Controlled Drug Delivery Systems

Carboxymethyl cellulose (CMC)-based hydrogels are generally superabsorbent and biocompatible, but their low mechanical strength limits their application. To overcome these drawbacks, we used bacterial succinoglycan (SG), a biocompatible natural polysaccharide, as a double crosslinking strategy to produce novel interpenetrating polymer network (IPN) hydrogels in a non-bead form. These new SG/CMC-based IPN hydrogels significantly increased the mechanical strength while maintaining the characteristic superabsorbent property of CMC-based hydrogels. The SG/CMC gels exhibited an 8.5-fold improvement in compressive stress and up to a 6.5-fold higher storage modulus (G') at the same strain compared to the CMC alone gels. Furthermore, SG/CMC gels not only showed pH-controlled drug release for 5-fluorouracil but also did not show any cytotoxicity to HEK-293 cells. This suggests that SG/CMC hydrogels could be used as future biomedical biomaterials for drug delivery.

Polysaccharides-Based Complex Particles' Protective Role on the Stability and Bioactivity of Immobilized Curcumin

The curcumin degradation represents a significant limitation for its applications. The stability of free curcumin (FC) and immobilized curcumin in complex particles (ComPs) based on different polysaccharides was studied under the action of several factors. Ultraviolet-visible (UV-VIS) and Fourier-transform infrared (FTIR) spectroscopy proved the FC photodegradation and its role as a metal chelator: 82% of FC and between 26% and 39.79% of curcumin within the ComPs degraded after exposure for 28 days to natural light. The degradation half-life (t_1/2) decreases for FC when the pH increases, from 6.8 h at pH = 3 to 2.1 h at pH = 9. For curcumin extracted from ComPs, t_1/2 was constant (between 10 and 13 h) and depended on the sample’s composition. The total phenol (TPC) and total flavonoids (TFC) content values increased by 16% and 13%, respectively, for FC exposed to ultraviolet light at λ = 365 nm (UVA), whereas no significant change was observed for immobilized curcumin. Antioxidant activity expressed by IC₅₀ (µmoles/mL) for FC exposed to UVA decreased by 29%, but curcumin within ComPs was not affected by the UVA. The bovine serum albumin (BSA) adsorption efficiency on the ComPs surface depends on the pH value and the cross-linking degree. ComPs have a protective role for the immobilized curcumin.

An Ustilago maydis chassis for itaconic acid production without by-products

Ustilago maydis is a promising yeast for the production of a range of valuable metabolites, including itaconate, malate, glycolipids and triacylglycerols. However, wild-type strains generally produce a potpourri of all of these metabolites, which hinders efficient production of single target chemicals. In this study, the diverse by-product spectrum of U. maydis was reduced through strain engineering using CRISPR/Cas9 and FLP/FRT, greatly increasing the metabolic flux into the targeted itaconate biosynthesis pathway. With this strategy, a marker-free chassis strain could be engineered, which produces itaconate from glucose with significantly enhanced titre, rate and yield. The lack of by-product formation not only benefited itaconate production, it also increases the efficiency of downstream processing improving cell handling and product purity.

Oral Drug Delivery Technologies-A Decade of Developments

Advanced drug delivery technologies, in general, enable drug reformulation and administration routes, together contributing to life-cycle management and allowing the innovator to maintain the product monopoly. Over the years, there has been a steady shift from mere life-cycle management to drug repurposing-applying delivery technologies to tackle solubility and permeability issues in early stages or safety and efficacy issues in the late stages of drug discovery processes. While the drug and the disease in question primarily drive the choice of route of administration, the oral route, for its compliance and safety attributes, is the most preferred route, particularly when it comes to chronic conditions, including pain, which is not considered a disease but a symptom of a primary cause. Therefore, the attempt of this review is to take a stock of the advances in oral delivery technologies that are applicable for injectable to oral transformation, improve risk-benefit profiles of existing orals, and apply them in the early discovery program to minimize the drug attrition rates.

Migration of endothelial cells into photo-responsive hydrogels with tunable modulus under the presence of pro-inflammatory macrophages

Cell migration in three-dimensional environment is extremely important for tissue regeneration and other biological processes. In this work, a model system was developed to study how endothelial cells (ECs) migrate into photo-responsive hydrogels under the presence of pro-inflammatory macrophages. The hydrogel was synthesized from hyaluronic acid grafted with coumarin and methacrylate moieties by both carbon-carbon covalent linking and coumarin dimerization under UV irradiation at 365 nm. The structure of the hydrogel was conveniently modulated by UV irradiation at 254 nm to decompose the coumarin dimers, leading to the significant decrease of modulus and increase of swelling ratio and mesh size. Under the presence of M1 macrophages, ECs were induced to migrate into the hydrogels with a different degree. A significant larger net displacement of ECs was found in the softer hydrogel obtained by irradiation with UV at 254 nm than in the stiffer original one at day 7.

Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application

This review describes some commercially available stimuli-responsive polymers of natural and synthetic origin, and their applications in drug delivery and textiles. The polymers of natural origin such as chitosan, cellulose, albumin, and gelatin are found to show both thermo-responsive and pH-responsive properties and these features of the biopolymers impart sensitivity to act differently under different temperatures and pH conditions. The stimuli-responsive characters of these natural polymers have been discussed in the review, and their respective applications in drug delivery and textile especially for textile-based transdermal therapy have been emphasized. Some practically important thermo-responsive polymers such as pluronic F127 (PF127) and poly(N-isopropylacrylamide) (pNIPAAm) of synthetic origin have been discussed in the review and they are of great importance commercially because of their in situ gel formation capacity. Some pH-responsive synthetic polymers have been discussed depending on their surface charge, and their drug delivery and textile applications have been discussed in this review. The selected stimuli-responsive polymers of synthetic origin are commercially available. Above all, the applications of bio-based or synthetic stimuli-responsive polymers in textile-based transdermal therapy are given special regard apart from their general drug delivery applications. A special insight has been given for stimuli-responsive hydrogel drug delivery systems for textile-based transdermal therapy, which is critical for the treatment of skin disease atopic dermatitis.

pH-Responsive carriers for oral drug delivery: challenges and opportunities of current platforms

Oral administration is a desirable alternative of parenteral administration due to the convenience and increased compliance to patients, especially for chronic diseases that require frequent administration. The oral drug delivery is a dynamic research field despite the numerous challenges limiting their effective delivery, such as enzyme degradation, hydrolysis and low permeability of intestinal epithelium in the gastrointestinal (GI) tract. pH-Responsive carriers offer excellent potential as oral therapeutic systems due to enhancing the stability of drug delivery in stomach and achieving controlled release in intestines. This review provides a wide perspective on current status of pH-responsive oral drug delivery systems prepared mainly with organic polymers or inorganic materials, including the strategies used to overcome GI barriers, the challenges in their development and future prospects, with focus on technology trends to improve the bioavailability of orally delivered drugs, the mechanisms of drug release from pH-responsive oral formulations, and their application for drug delivery, such as protein and peptide therapeutics, vaccination, inflammatory bowel disease (IBD) and bacterial infections.

Nanogel-Integrated pH-Responsive Composite Hydrogels for Controlled Drug Delivery

A novel pH-sensitive hydrogel system consisting of poly(methacrylic acid-g-ethylene glycol) (P(MAA-g-EG)) and acryloyl group modified-cholesterol-bearing pullulan (CHPOA) nanogels was developed for the controlled delivery of an anticonvulsant drug, pregabalin (PGB). Here, the hydrophilic hydrogel network provides the pH-sensitive swelling behavior, whereas nanogel components form separate reservoirs for the delivery of drugs with different hydrophobicities. These nanocarrier-integrated hybrid gels were synthesized through both surface-initiated and bulk photopolymerization approaches. The swelling and drug release behavior of these pH-responsive hydrogels synthesized by different photopolymerization approaches at visible and UV light wavelenghts were studied at acidic and basic pH values. Nanogel-integrated hydrogels exhibited higher swelling behavior compared to plain hydrogels in reversible swelling experiments. Similarly, the presence of nanogels in hydrogel network enhanced the loading and release percentages of PGB and the release was analyzed to describe the mode of transport through the network. In vitro cytotoxicity assay suggests that hydrogels in altered groups are nontoxic. This is the first report about the visible light-induced synthesis of a pH-responsive network incorporated CHPOA nanogels. Responsive and multifunctional properties of this system could be used for pH-triggered release of therapeutic molecules for clinical applications.

A Stimuli-Responsive, Binary Reagent System for Rapid Isolation of Protein Biomarkers

Magnetic microbeads exhibit rapid separation characteristics and are widely employed for biomolecule and cell isolations in research laboratories, clinical diagnostics assays, and cell therapy manufacturing. However, micrometer particle diameters compromise biomarker recognition, which leads to long incubation times and significant reagent demands. Here, a stimuli-responsive binary reagent system is presented that combines the nanoscale benefits of efficient biomarker recognition and the microscale benefits of rapid magnetic separation. This system comprises magnetic nanoparticles and polymer-antibody (Ab) conjugates that transition from hydrophilic nanoscale reagents to microscale aggregates in response to temperature stimuli. The binary reagent system was benchmarked against Ab-labeled Dynabeads in terms of biomarker isolation kinetics, assay speed, and reagent needs. Surface plasmon resonance (SPR) measurements showed that polymer conjugation did not significantly alter the Ab's binding affinity or kinetics. ELISA analysis showed that the unconjugated Ab, polymer-Ab conjugates, and Ab-labeled Dynabeads exhibited similar equilibrium dissociation constants (Kd), ∼2 nM. However, the binary reagent system isolated HIV p24 antigen from spiked serum specimens (150 pg/mL) much more quickly than Dynabeads, which resulted in shorter binding times by tens of minutes, or about 30-50% shorter overall assay times. The binary reagent system showed improved performance because the Ab molecules were not conjugated to large, solid microparticle surfaces. This stimuli-responsive binary reagent system illustrates the potential advantages of nanoscale reagents in molecule and cell isolations for both research and clinical applications.

Enhanced User-Control of Small Molecule Drug Release from a Poly(ethylene glycol) Hydrogel via Azobenzene/Cyclodextrin Complex Tethers

We present a versatile and facile method to enhance user-control of small molecule drug release from a poly(ethylene glycol)-based hydrogel using the host/guest complex formed between an azobenzene derivative guest and a β-cyclodextrin host. A model drug is formed from a short peptide containing a fluorophore and an azobenzene functional group on one terminus. Upon irradiation with UV light, azobenzene isomerization leads to decreased complex formation and an on-demand acceleratation of the release rate of an entrapped model drug.

Complexation Hydrogels as Oral Delivery Vehicles of Therapeutic Antibodies: An in Vitro and ex Vivo Evaluation of Antibody Stability and Bioactivity

Oral administration of monoclonal antibodies (mAbs) may enable the localized treatment of infections or other conditions in the gastrointestinal tract (GI) as well as systemic diseases. As with the development of oral protein biotherapeutics, one of the most challenging tasks in antibody therapies is the loss of biological activity due to physical and chemical instabilities. New families of complexation hydrogels with pH-responsive properties have demonstrated to be excellent transmucosal delivery vehicles. This contribution focuses on the design and evaluation of hydrogel carriers that will minimize the degradation and maximize the in vivo activity of anti-TNF-α, a mAb used for the treatment of inflammatory bowel disease (IBD) in the GI tract and systemically for the treatment of rheumatoid arthritis. P(MAA-g-EG) and P(MAA-co-NVP) hydrogels systems were optimized to achieve adequate swelling behavior, which translated into improved protein loading and release at neutral pH simulating the small intestine conditions. Additionally, these hydrogel systems preserve antibody bioactivity upon release resulting in the systemic circulation of an antibody capable of effectively performing its biological function. The compatibility if these hydrogels for mAb bioactivity preservation and release makes them candidates for use as oral delivery systems for therapeutic antibodies.

Metabolic engineering of carbon and redox flow in the production of small organic acids

The review describes efforts toward metabolic engineering of production of organic acids. One aspect of the strategy involves the generation of an appropriate amount and type of reduced cofactor needed for the designed pathway. The ability to capture reducing power in the proper form, NADH or NADPH for the biosynthetic reactions leading to the organic acid, requires specific attention in designing the host and also depends on the feedstock used and cell energetic requirements for efficient metabolism during production. Recent work on the formation and commercial uses of a number of small mono- and diacids is discussed with redox differences, major biosynthetic precursors and engineering strategies outlined. Specific attention is given to those acids that are used in balancing cell redox or providing reduction equivalents for the cell, such as formate, which can be used in conjunction with metabolic engineering of other products to improve yields. Since a number of widely studied acids derived from oxaloacetate as an important precursor, several of these acids are covered with the general strategies and particular components summarized, including succinate, fumarate and malate. Since malate and fumarate are less reduced than succinate, the availability of reduction equivalents and level of aerobiosis are important parameters in optimizing production of these compounds in various hosts. Several other more oxidized acids are also discussed as in some cases, they may be desired products or their formation is minimized to afford higher yields of more reduced products. The placement and connections among acids in the typical central metabolic network are presented along with the use of a number of specific non-native enzymes to enhance routes to high production, where available alternative pathways and strategies are discussed. While many organic acids are derived from a few precursors within central metabolism, each organic acid has its own special requirements for high production and best compatibility with host physiology.

pH-Responsive poly(itaconic acid-co-N-vinylpyrrolidone) hydrogels with reduced ionic strength loading solutions offer improved oral delivery potential for high isoelectric point-exhibiting therapeutic proteins

pH-Responsive hydrogels comprised of itaconic acid copolymerized with N-vinylpyrrolidone (P(IA-co-NVP)) were synthesized and tested as carriers for the oral delivery of high isoelectric point (pI) exhibiting therapeutic proteins. Swelling studies show that P(IA-co-NVP) hydrogels exhibit significantly greater and faster pH-responsive swelling than previously studied methacrylic acid-based hydrogels, achieving up to 68% greater equilibrium swelling and 10.4 times greater swelling in time-limited experiments. Using salmon calcitonin as a model high pI protein therapeutic, we show that P(IA-co-NVP) hydrogels exhibit significantly greater delivery potential than methacrylic acid-based hydrogels. Additionally, we show that utilizing a lower ionic strength solution during drug loading significantly improves drug delivery potential for high pI therapeutics. By using a 1.5mM PBS buffer rather than the standard 150 mM PBS buffer during loading, up to 83 times as much calcitonin can be delivered in neutral conditions, with up to a 9.6-fold improvement in percent release. Using P(IA-co-NVP) hydrogel microparticles and a low ionic strength loading solution, up to 48 μg calcitonin/mg hydrogel can be delivered in small intestinal conditions. Based on expected absorption in the small intestine, this is sufficient delivery potential for achieving therapeutic dosage via a single, regularly-sized pill taken daily.

Tuning mechanical performance of poly(ethylene glycol) and agarose interpenetrating network hydrogels for cartilage tissue engineering

Hydrogels are attractive for tissue engineering applications due to their incredible versatility, but they can be limited in cartilage tissue engineering applications due to inadequate mechanical performance. In an effort to address this limitation, our team previously reported the drastic improvement in the mechanical performance of interpenetrating networks (IPNs) of poly(ethylene glycol) diacrylate (PEG-DA) and agarose relative to pure PEG-DA and agarose networks. The goal of the current study was specifically to determine the relative importance of PEG-DA concentration, agarose concentration, and PEG-DA molecular weight in controlling mechanical performance, swelling characteristics, and network parameters. IPNs consistently had compressive and shear moduli greater than the additive sum of either single network when compared to pure PEG-DA gels with a similar PEG-DA content. IPNs withstood a maximum stress of up to 4.0 MPa in unconfined compression, with increased PEG-DA molecular weight being the greatest contributing factor to improved failure properties. However, aside from failure properties, PEG-DA concentration was the most influential factor for the large majority of properties. Increasing the agarose and PEG-DA concentrations as well as the PEG-DA molecular weight of agarose/PEG-DA IPNs and pure PEG-DA gels improved moduli and maximum stresses by as much as an order of magnitude or greater compared to pure PEG-DA gels in our previous studies. Although the viability of encapsulated chondrocytes was not significantly affected by IPN formulation, glycosaminoglycan (GAG) content was significantly influenced, with a 12-fold increase over a three-week period in gels with a lower PEG-DA concentration. These results suggest that mechanical performance of IPNs may be tuned with partial but not complete independence from biological performance of encapsulated cells.

Biomaterials and bioengineering tomorrow's healthcare

Biomaterials are being used for the healthcare applications from ancient times. But subsequent evolution has made them more versatile and has increased their utility. Biomaterials have revolutionized the areas like bioengineering and tissue engineering for the development of novel strategies to combat life threatening diseases. Together with biomaterials, stem cell technology is also being used to improve the existing healthcare facilities. These concepts and technologies are being used for the treatment of different diseases like cardiac failure, fractures, deep skin injuries, etc. Introduction of nanomaterials on the other hand is becoming a big hope for a better and an affordable healthcare. Technological advancements are underway for the development of continuous monitoring and regulating glucose levels by the implantation of sensor chips. Lab-on-a-chip technology is expected to modernize the diagnostics and make it more easy and regulated. Other area which can improve the tomorrow’s healthcare is drug delivery. Micro-needles have the potential to overcome the limitations of conventional needles and are being studied for the delivery of drugs at different location in human body. There is a huge advancement in the area of scaffold fabrication which has improved the potentiality of tissue engineering. Most emerging scaffolds for tissue engineering are hydrogels and cryogels. Dynamic hydrogels have huge application in tissue engineering and drug delivery. Furthermore, cryogels being supermacroporous allow the attachment and proliferation of most of the mammalian cell types and have shown application in tissue engineering and bioseparation. With further developments we expect these technologies to hit the market in near future which can immensely improve the healthcare facilities.

Hydrogels in Healthcare: From Static to Dynamic Material Microenvironments

Advances in hydrogel design have revolutionized the way biomaterials are applied to address biomedical needs. Hydrogels were introduced in medicine over 50 years ago and have evolved from static, bioinert materials to dynamic, bioactive microenvironments, which can be used to direct specific biological responses such as cellular ingrowth in wound healing or on-demand delivery of therapeutics. Two general classes of mechanisms, those defined by the user and those dictated by the endogenous cells and tissues, can control dynamic hydrogel microenvironments. These highly tunable materials have provided bioengineers and biological scientists with new ways to not only treat patients in the clinic but to study the fundamental cellular responses to engineered microenvironments as well. Here, we provide a brief history of hydrogels in medicine and follow with a discussion of the synthesis and implementation of dynamic hydrogel microenvironments for healthcare-related applications.

Advanced molecular design of biopolymers for transmucosal and intracellular delivery of chemotherapeutic agents and biological therapeutics

Hydrogels have been instrumental in the development of polymeric systems for controlled release of therapeutic agents. These materials are attractive for transmucosal and intracellular drug delivery because of their facile synthesis, inherent biocompatibility, tunable physicochemical properties, and capacity to respond to various physiological stimuli. In this contribution, we outline a multifaceted hydrogel-based approach for expanding the range of therapeutics in oral formulations from classical small-molecule drugs to include proteins, chemotherapeutics, and nucleic acids. Through judicious material selection and careful design of copolymer composition and molecular architecture, we can engineer systems capable of responding to distinct physiological cues, with tunable physicochemical properties that are optimized to load, protect, and deliver valuable macromolecular payloads to their intended site of action. These hydrogel carriers, including complexation hydrogels, tethered hydrogels, interpenetrating networks, nanoscale hydrogels, and hydrogels with decorated structures are investigated for their ability to respond to changes in pH, to load and release insulin and fluorescein, and remain non-toxic to Caco-2 cells. Our results suggest these novel hydrogel networks have great potential for controlled delivery of proteins, chemotherapeutics, and nucleic acids.

Micro- and nanotechnologies for intelligent and responsive biomaterial-based medical systems

Advances in medical treatments of a wide variety of pathophysiological conditions require the development of better therapeutic agents, as well as a combination of the required therapeutic agents with device-integrated biomaterials that can serve as sensors and carriers. Combination of micro- and nano-fabricated systems with intelligent biomaterials that have the ability to sense and respond is a promising avenue for the development of better diagnostic and therapeutic medical systems. Micro- and nano-electromechanical systems (MEMs and NEMs) are now becoming a family of potentially powerful new technologies for drug delivery, diagnostic tools, and tissue engineering. Improvements in micro- and nano-fabrication technologies have enhanced the ability to create better performing therapeutic systems for numerous pathophysiological applications. More importantly, MEMS- and NEMS-based tissue regeneration scaffolds, biosensors, and drug delivery devices provide new opportunities to mimic the natural intelligence and response of biological systems.