Analysis of the moment arms and kinematics of ostrich (Struthio camelus) double patellar sesamoids

Morphometric studies on the appendicular bony skeleton of the ostriches (Struthio Camelus)

BACKGROUND

Morphometric study of the bony elements of the appendicular skeleton in the ostrich was fully described and identified. The appendicular skeleton included the bones of the pectoral girdle, the wing, the pelvic girdle and the pelvic limb.

RESULTS

The shoulder girdle of the ostrich included the scapula and coracoid bones. The scapula appeared as a flattened spoon-like structure. The coracoid bone appeared quadrilateral in outline. The mean length of the scapula and coracoid (sternal wing) were 15.00 ± 0.23 and 10.00 ± 0.17 cm, respectively. The wing included the humerus, ulna, radius, radial carpal bone, ulnar carpal bone, carpometacarpus and phalanges of three digits. The mean length of the humerus, radius, and ulna were 33.00 ± 0.46, 10.50 ± 0.40 and 11.50 ± 0.29 cm respectively. The carpometacarpus was formed by the fusion of the distal row of carpal bones and three metacarpal bones. Digits of the wing were three in number; the alular, major and minor digits. Os coxae comprised the ilium, ischium and pubis. Their mean lengths were 36.00 ± 0.82 cm, 32.00 ± 0.20 and 55.00 ± 0.2.9 cm, respectively. The femur was a stout short bone, that appeared shorter than the tibiotarsus. The mean length of the femur, tibiotarsus, and tarsometatarsus were 30.00 ± 0.23, 52.00 ± 0.50 and 46.00 ± 0.28 cm. Tibiotarsus was the longest bone in the pelvic limb. The fibula was a long bone (44.00 ± 0.41 cm) lying along the lateral surface of the tibiotarsus. The tarsometatarsus was a strong long bone formed by the fusion of the metatarsal (II, III, IV) and the distal row of tarsal bones. It was worth mentioning that metatarsal II was externally absent in adults.

CONCLUSIONS

In the appendicular skeleton of ostrich, there were special characteristic features that were detected in our study; the clavicle was absent, the coracoid bone was composed of a sternal wing and scapular wing, the ulna was slightly longer in length than the radius. The coupled patellae i.e., the proximal and distal patella were observed; and the ostrich pedal digits were only two; viz., the third (III) and fourth (IV) digits.

Modern three-dimensional digital methods for studying locomotor biomechanics in tetrapods

Here, we review the modern interface of three-dimensional (3D) empirical (e.g. motion capture) and theoretical (e.g. modelling and simulation) approaches to the study of terrestrial locomotion using appendages in tetrapod vertebrates. These tools span a spectrum from more empirical approaches such as XROMM, to potentially more intermediate approaches such as finite element analysis, to more theoretical approaches such as dynamic musculoskeletal simulations or conceptual models. These methods have much in common beyond the importance of 3D digital technologies, and are powerfully synergistic when integrated, opening a wide range of hypotheses that can be tested. We discuss the pitfalls and challenges of these 3D methods, leading to consideration of the problems and potential in their current and future usage. The tools (hardware and software) and approaches (e.g. methods for using hardware and software) in the 3D analysis of tetrapod locomotion have matured to the point where now we can use this integration to answer questions we could never have tackled 20 years ago, and apply insights gleaned from them to other fields.

Validation of an Echidna Forelimb Musculoskeletal Model Using XROMM and diceCT

In evolutionary biomechanics, musculoskeletal computer models of extant and extinct taxa are often used to estimate joint range of motion (ROM) and muscle moment arms (MMAs), two parameters which form the basis of functional inferences. However, relatively few experimental studies have been performed to validate model outputs. Previously, we built a model of the short-beaked echidna (Tachyglossus aculeatus) forelimb using a traditional modelling workflow, and in this study we evaluate its behaviour and outputs using experimental data. The echidna is an unusual animal representing an edge-case for model validation: it uses a unique form of sprawling locomotion, and possesses a suite of derived anatomical features, in addition to other features reminiscent of extinct early relatives of mammals. Here we use diffusible iodine-based contrast-enhanced computed tomography (diceCT) alongside digital and traditional dissection to evaluate muscle attachments, modelled muscle paths, and the effects of model alterations on the MMA outputs. We use X-ray Reconstruction of Moving Morphology (XROMM) to compare ex vivo joint ROM to model estimates based on osteological limits predicted via single-axis rotation, and to calculate experimental MMAs from implanted muscles using a novel geometric method. We also add additional levels of model detail, in the form of muscle architecture, to evaluate how muscle torque might alter the inferences made from MMAs alone, as is typical in evolutionary studies. Our study identifies several key findings that can be applied to future models. 1) A light-touch approach to model building can generate reasonably accurate muscle paths, and small alterations in attachment site seem to have minimal effects on model output. 2) Simultaneous movement through multiple degrees of freedom, including rotations and translation at joints, are necessary to ensure full joint ROM is captured; however, single-axis ROM can provide a reasonable approximation of mobility depending on the modelling objectives. 3) Our geometric method of calculating MMAs is consistent with model-predicted MMAs calculated via partial velocity, and is a potentially useful tool for others to create and validate musculoskeletal models. 4) Inclusion of muscle architecture data can change some functional inferences, but in many cases reinforced conclusions based on MMA alone.

Architectural properties of the musculoskeletal system in the shoulder of two callitrichid primate species derived from virtual dissection

Callitrichidae are small, arboreal New World primates that utilize a variety of locomotor behaviors including trunk-to-trunk leaping (TTL) and horizontal locomotion which involve differential functional demands. Little is known about the relationship between the preferred locomotor behavior and musculoskeletal architecture of these primates. In this study, we compared the musculoskeletal architecture of selected shoulder muscles in two cadavers each of the trunk-to-trunk leaper Cebuella pygmaea and the mainly pronograde quadrupedally moving Saguinus imperator subgrisescens. Contrast-enhanced microfocus computed tomography (µCT) was used to virtually dissect the cadavers, produce muscle maps, and create 3D reconstructions for an image-based analysis of the muscles. Muscle lengths, muscle volumes, and osteological muscle moment arms were measured, and the anatomical cross-sectional areas (ACSA) were calculated. We expected the muscles of the forelimb of S. imperator to be larger in volume and to be relatively shorter with a larger ACSA due to a higher demand for powerful extension in the forelimbs of this horizontally locomoting species. For C. pygmaea, we expected relatively larger moment arms for the triceps brachii, supraspinatus, infraspinatus and subscapularis, as larger moment arms present an advantage for extensive vertical clinging on the trunk. The muscles of S. imperator were relatively larger in volume than in C. pygmaea and had a relatively larger ACSA. Thus, the shoulder muscles of S. imperator were suited to generate relatively larger forces than those of C. pygmaea. Contrary to our expectations, there were only slight differences between species in regard to muscle lengths and moment arms, which suggests that these properties are not dependent on the preferred locomotor mode. The study of this limited dataset demonstrates that some but not all properties of the musculoskeletal architecture reflect the preferred locomotor behavior in the two species of Callitrichidae examined.

Three-dimensional motion of the patella in French bulldogs with and without medial patellar luxation

Background

French bulldogs exhibit significantly larger femoral external rotation and abduction than other breeds. We were curious as to whether this peculiar leg kinematic affects patellar motion and/or might induce medial patellar subluxation (MPSL) or medial patellar permanent luxation (MPPL). We hypothesized that the more abducted leg posture during stance causes an unusual medial pull direction of the rectus femoris muscle during stance, and that this may facilitate the occurrence of MPSL or even MPPL during locomotion. To test our hypothesis, we analyzed existing stifle-joint X-ray-sequences collected during the treadmill walk and trot of seven adult female French bulldogs. We estimated 3D-patellar kinematics using Scientific Rotoscoping.

Results

The three-dimensional motion of the patella comprises rotations and translations. From the seven dogs analyzed, three exhibited MPSL and one MPPL during the gait cycle. Medial patellar luxation (MPL) occurred mostly around toe-off in both gaits studied.

Patellar position was generally not gait-related at the analyzed timepoints. In dogs with MPL, the patella was placed significantly more distally (p = 0.037) at touch-down (TD) and at midswing (p = 0.024), and significantly more medial at midswing (p = 0.045) compared to dogs without MPL.

Conclusions

Medial patellar luxation seems to be the consequence of the far from parasagittal position of the stifle joint during stance due to a broad trunk, and a wide pelvis. This peculiar leg orientation leads to a medial sideway pull caused by the rectus femoris muscle and the quadriceps femoris and may initiate plastic deformation of the growing femur and tibia. Thus, a way to avoid MPL could be to control breeding by selecting dogs with lean bodies and narrow pelvis. Actual breeding control programs based on the orthopedic examination are susceptible to errors. Systematic errors arise from the fact that the grading system is highly dependent on the dog’s condition and the veterinarians’ ability to perform the palpation on the stifle. Based on our results, the position of the patella at TD, or even perhaps during stand might offer a possibility of an objective radioscopic diagnostic of the MPL.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12917-021-02787-z.

Origin of the avian predentary and evidence of a unique form of cranial kinesis in Cretaceous ornithuromorphs

The avian predentary is a small skeletal structure located rostral to the paired dentaries found only in Mesozoic ornithuromorphs. The evolution and function of this enigmatic element is unknown. Skeletal tissues forming the predentary and the lower jaws in the basal ornithuromorph Yanornis martini are identified using computed-tomography, scanning electron microscopy, and histology. On the basis of these data, we propose hypotheses for the development, structure, and function of this element. The predentary is composed of trabecular bone. The convex caudal surface articulates with rostromedial concavities on the dentaries. These articular surfaces are covered by cartilage, which on the dentaries is divided into 3 discrete patches: 1 rostral articular cartilage and 2 symphyseal cartilages. The mechanobiology of avian cartilage suggests both compression and kinesis were present at the predentary-dentary joint, therefore suggesting a yet unknown form of avian cranial kinesis. Ontogenetic processes of skeletal formation occurring within extant taxa do not suggest the predentary originates within the dentaries, nor Meckel's cartilage. We hypothesize that the predentary is a biomechanically induced sesamoid that arose within the soft connective tissues located rostral to the dentaries. The mandibular canal hosting the alveolar nerve suggests that the dentary teeth and predentary of Yanornis were proprioceptive. This whole system may have increased foraging efficiency. The Mesozoic avian predentary apparently coevolved with an edentulous portion of the premaxilla, representing a unique kinetic morphotype that combined teeth with a small functional beak and persisted successfully for ∼60 million years.

Sesamoids in tetrapods: the origin of new skeletal morphologies

Along with supernumerary bones, sesamoids, defined as any organized intratendinous/intraligamentous structure, including those composed of fibrocartilage, adjacent to an articulation or joint, have been frequently considered as enigmatic structures associated with the joints of the skeletal system of vertebrates. This review allows us to propose a dynamic model to account for part of skeletal phenotypic diversity: during evolution, sesamoids can become displaced, attaching to and detaching from the long bone epiphyses and diaphysis. Epiphyses, apophyses and detached sesamoids are able to transform into each other, contributing to the phenotypic variability of the tetrapod skeleton. This dynamic model is a new paradigm to delineate the contribution of sesamoids to skeletal diversity. Herein, we first present a historical approach to the study of sesamoids, discussing the genetic versus epigenetic theories of their genesis and growth. Second, we construct a dynamic model. Third, we present a summary of literature on sesamoids of the main groups of tetrapods, including veterinary and human clinical contributions, which are the best-studied aspects of sesamoids in recent decades. Finally, we discuss the identity of certain structures that have been labelled as sesamoids despite insufficient formal testing of homology. We also propose a new definition to help the identification of sesamoids in general. This review is particularly timely, given the recent increasing interest and research activity into the developmental biology and mechanics of sesamoids. With this updated and integrative discussion, we hope to pave the way to improve the understanding of sesamoid biology and evolution.

Cancellous bone and theropod dinosaur locomotion. Part II-a new approach to inferring posture and locomotor biomechanics in extinct tetrapod vertebrates

This paper is the second of a three-part series that investigates the architecture of cancellous bone in the main hindlimb bones of theropod dinosaurs, and uses cancellous bone architectural patterns to infer locomotor biomechanics in extinct non-avian species. Cancellous bone is widely known to be highly sensitive to its mechanical environment, and therefore has the potential to provide insight into locomotor biomechanics in extinct tetrapod vertebrates such as dinosaurs. Here in Part II, a new biomechanical modelling approach is outlined, one which mechanistically links cancellous bone architectural patterns with three-dimensional musculoskeletal and finite element modelling of the hindlimb. In particular, the architecture of cancellous bone is used to derive a single 'characteristic posture' for a given species-one in which bone continuum-level principal stresses best align with cancellous bone fabric-and thereby clarify hindlimb locomotor biomechanics. The quasi-static approach was validated for an extant theropod, the chicken, and is shown to provide a good estimate of limb posture at around mid-stance. It also provides reasonable predictions of bone loading mechanics, especially for the proximal hindlimb, and also provides a broadly accurate assessment of muscle recruitment insofar as limb stabilization is concerned. In addition to being useful for better understanding locomotor biomechanics in extant species, the approach hence provides a new avenue by which to analyse, test and refine palaeobiomechanical hypotheses, not just for extinct theropods, but potentially many other extinct tetrapod groups as well.

Functional capacity of kangaroo rat hindlimbs: adaptations for locomotor performance

Many cursorial and large hopping species are extremely efficient locomotors with various morphological adaptations believed to reduce mechanical demand and improve movement efficiency, including elongated distal limb segments. However, despite having elongated limbs, small hoppers such as desert kangaroo rats (Dipodomys deserti) are less efficient locomotors than their larger counterparts, which may be in part due to avoiding predators through explosive jumping movements. Despite potentially conflicting mechanical demands between the two movements, kangaroo rats are both excellent jumpers and attain high hopping speeds, likely due to a specialized hindlimb musculoskeletal morphology. This study combined experimental dissection data with a static analysis of muscle moment generating capacities using a newly developed musculoskeletal model to characterize kangaroo rat hindlimb musculoskeletal architecture and investigate how morphology has evolved to meet hopping and jumping mechanical demands. Hindlimb morphology appears biased towards generating constant moment arms over large joint ranges of motion in this species, which may balance competing requirements by reducing the need for posture and movement specific excitation patterns. The ankle extensors are a major exception to the strong positive relationship exhibited by most muscles between muscle architecture parameters (e.g. Lfibre) and joint moment arms. These muscles appear suited to meeting the high moments required for jumping: the biarticular nature of the ankle extensors is leveraged to reduce MTU strain and create a four-bar linkage that facilitates proximal force transfer. The kangaroo rat hindlimb provides an interesting case study for understanding how morphology balances the sometimes competing demands of hopping and jumping.

The patella: A mechanical determinant of coordination during vertical jumping

The patella is traditionally understood to be a "joint spacer" that increases the moment arm of the patellar tendon. This characterisation is unsatisfactory as it fails to explain the more interesting characteristics of the patella: 1) that the changing pivot point of the patella causes the ratio of quadriceps to patellar tendon force to almost double as the knee flexes; 2) that the patellar tendon exerts an anteriorly directed force on the tibia when the knee is extended but this switches to a posterior draw as the knee flexes; and 3) that the presence of the patella allows the quadriceps to exert different moments on the femur and tibia. Here, I use a simple, model of the geometry of the knee to calculate the changes in the effective moment arms of the quadriceps on the femur and tibia as the knee extends during vertical jumping. These effective moment arms are then contrasted with the actual changes in moments seen during a vertical jump. This analysis demonstrates that the changing geometry of the knee alone can explain 93% (p < 0.05) of the variance in the characteristic femoral to tibial pattern of moment production during jumping - suggesting that the mechanics of the patella have a crucial influence on the coordination of jumping. These results lend support to the contention that mechanical considerations play a pivotal role in the control of movement by creating a stronger imperative towards a particular movement solution than might be suggested by the large degree of redundancy in the neuromuscular system. This idea is consistent with dynamic systems theories of motor control, i.e. the mechanical structure of the musculoskeletal system itself is important in the organisation of movement (so called mechanical intelligence).

Gearing effects of the patella (knee extensor muscle sesamoid) of the helmeted guineafowl during terrestrial locomotion

Human patellae (kneecaps) are thought to act as gears, altering the mechanical advantage of knee extensor muscles during running. Similar sesamoids have evolved in the knee extensor tendon independently in birds, but it is unknown if these also affect the mechanical advantage of knee extensors. Here, we examine the mechanics of the patellofemoral joint in the helmeted guineafowl Numida meleagris using a method based on muscle and tendon moment arms taken about the patella's rotation centre around the distal femur. Moment arms were estimated from a computer model representing hindlimb anatomy, using hip, knee and patellar kinematics acquired via marker-based biplanar fluoroscopy from a subject running at 1.6 ms^-1 on a treadmill. Our results support the inference that the patella of Numida does alter knee extensor leverage during running, but with a mechanical advantage generally greater than that seen in humans, implying relatively greater extension force but relatively lesser extension velocity.