Four forearm flexor muscles of the horse, Equus caballus: anatomy and histochemistry

From fibre to function: are we accurately representing muscle architecture and performance?

The size and arrangement of fibres play a determinate role in the kinetic and energetic performance of muscles. Extrapolations between fibre architecture and performance underpin our understanding of how muscles function and how they are adapted to power specific motions within and across species. Here we provide a synopsis of how this 'fibre to function' paradigm has been applied to understand muscle design, performance and adaptation in animals. Our review highlights the widespread application of the fibre to function paradigm across a diverse breadth of biological disciplines but also reveals a potential and highly prevalent limitation running through past studies. Specifically, we find that quantification of muscle architectural properties is almost universally based on an extremely small number of fibre measurements. Despite the volume of research into muscle properties, across a diverse breadth of research disciplines, the fundamental assumption that a small proportion of fibre measurements can accurately represent the architectural properties of a muscle has never been quantitatively tested. Subsequently, we use a combination of medical imaging, statistical analysis, and physics-based computer simulation to address this issue for the first time. By combining diffusion tensor imaging (DTI) and deterministic fibre tractography we generated a large number of fibre measurements (>3000) rapidly for individual human lower limb muscles. Through statistical subsampling simulations of these measurements, we demonstrate that analysing a small number of fibres (n < 25) typically used in previous studies may lead to extremely large errors in the characterisation of overall muscle architectural properties such as mean fibre length and physiological cross-sectional area. Through dynamic musculoskeletal simulations of human walking and jumping, we demonstrate that recovered errors in fibre architecture characterisation have significant implications for quantitative predictions of in-vivo dynamics and muscle fibre function within a species. Furthermore, by applying data-subsampling simulations to comparisons of muscle function in humans and chimpanzees, we demonstrate that error magnitudes significantly impact both qualitative and quantitative assessment of muscle specialisation, potentially generating highly erroneous conclusions about the absolute and relative adaption of muscles across species and evolutionary transitions. Our findings have profound implications for how a broad diversity of research fields quantify muscle architecture and interpret muscle function.

Great power comes at a high (locomotor) cost: the role of muscle fascicle length in the power versus economy performance trade-off

Muscle design constraints preclude simultaneous specialization of the vertebrate locomotor system for explosive and economical force generation. The resulting performance trade-off between power and economy has been attributed primarily to individual differences in muscle fiber type composition. While certainly crucial for performance specialization, fiber type likely interacts with muscle architectural parameters, such as fascicle length, to produce this trade-off. Longer fascicles composed of more serial sarcomeres can achieve faster shortening velocities, allowing for greater power production. Long fascicles likely reduce economy, however, because more energy-consuming contractile units are activated for a given force production. We hypothesized that longer fascicles are associated with both increased power production and locomotor cost. In 11 power-trained and 13 endurance-trained recreational athletes, we measured (1) muscle fascicle length via ultrasound in the gastrocnemius lateralis, gastrocnemius medialis and vastus lateralis, (2) maximal power during cycling and countermovement jumps, and (3) running cost of transport. We estimated muscle fiber type non-invasively based on the pedaling rate at which maximal cycling power occurred. As predicted, longer gastrocnemius muscle fascicles were correlated with greater lower-body power production and cost of transport. Multiple regression analyses revealed that variability in maximal power was explained by fiber type (46% for cycling, 24% for jumping) and average fascicle length (20% for cycling, 13% for jumping), while average fascicle length accounted for 15% of the variation in cost of transport. These results suggest that, at least for certain muscles, fascicle length plays an important role in the power versus economy performance trade-off.

A Horse of a Different Color?: Tensile Strength and Elasticity of Sloth Flexor Tendons

Tendons must be able to withstand the tensile forces generated by muscles to provide support while avoiding failure. The properties of tendons in mammal limbs must therefore be appropriate to accommodate a range of locomotor habits and posture. Tendon collagen composition provides resistance to loading that contributes to tissue strength which could, however, be modified to not exclusively confer large strength and stiffness for elastic energy storage/recovery. For example, sloths are nearly obligate suspenders and cannot run, and due to their combined low metabolic rate, body temperature, and rate of digestion, they have an extreme need to conserve energy. It is possible that sloths have a tendon "suspensory apparatus" functionally analogous to that in upright ungulates, thus allowing for largely passive support of their body weight below-branch, while concurrently minimizing muscle contractile energy expenditure. The digital flexor tendons from the fore- and hindlimbs of two-toed (Choloepus hoffmanni) and three-toed (Bradypus variegatus) sloths were loaded in tension until failure to test this hypothesis. Overall, tensile strength and elastic (Young's) modulus of sloth tendons were low, and these material properties were remarkably similar to those of equine suspensory "ligaments." The results also help explain previous findings in sloths showing relatively low levels of muscle activation in the digital flexors during postural suspension and suspensory walking.

Review of the methods used for calculating physiological cross-sectional area (PCSA) for ecological questions

This review examines literature that used physiological cross-sectional area (PCSA) as a representative measure of an individual muscle's maximal isometric force production. PCSA is used to understand the muscle architecture and how a trade-off between muscle force and muscle contractile velocity reflect adaptations of the musculoskeletal system as a reflection of functional demands. Over the decades, methods have been developed to measure muscle volume, fascicle lengths, and pennation angle to calculate PCSA. The advantages and limitations of these methods (especially the inclusion/elimination of pennation angle) are discussed frequently; however, these method descriptions are scattered throughout the literature. Here, we reviewed and summarised the different approaches to collecting and recording muscle architectural properties to subsequently calculate PCSA. By critically discussing the advantages and limitations of each methodology, we aim to provide readers with an overview of repeatable methods to assess muscle architecture. This review may serve as a guide to facilitate readers searching for the appropriate techniques to calculate PCSA and measure muscle architecture to be applied in ecomorphology research. RESEARCH HIGHLIGHTS: Discuss the theories behind PCSA in a synthesised review to inform researchers about PCSA methodology.

Frequency dependence of power and its implications for contractile function of muscle fibers from the digital flexors of horses

The digital flexors of horses must produce high force to support the body weight during running, and a need for these muscles to generate power is likely limited during locomotion over level ground. Measurements of power output from horse muscle fibers close to physiological temperatures, and when cyclic strain is imposed, will help to better understand the in vivo performance of the muscles as power absorbers and generators. Skinned fibers from the deep (DDF) and superficial (SDF) digital flexors, and the soleus (SOL) underwent sinusoidal oscillations in length over a range of frequencies (0.5–16 Hz) and strain amplitudes (0.01–0.06) under maximum activation (pCa 5) at 30°C. Results were analyzed using both workloop and Nyquist plot analyses to determine the ability of the fibers to absorb or generate power and the frequency dependence of those abilities. Power absorption was dominant at most cycling frequencies and strain amplitudes in fibers from all three muscles. However, small amounts of power were generated (0.002–0.05 Wkg⁻¹) at 0.01 strain by all three muscles at relatively slow cycling frequencies: DDF (4–7 Hz), SDF (4–5 Hz) and SOL (0.5–1 Hz). Nyquist analysis, reflecting the influence of cross‐bridge kinetics on power generation, corroborated these results. The similar capacity for power generation by DDF and SDF versus lower for SOL, and the faster frequency at which this power was realized in DDF and SDF fibers, are largely explained by the fast myosin heavy chain isoform content in each muscle. Contractile function of DDF and SDF as power absorbers and generators, respectively, during locomotion may therefore be more dependent on their fiber architectural arrangement than on the physiological properties of their muscle fibers.

Equine digital flexor muscles fibers have a relatively large capacity for energy absorption. This physiological property of their muscle fibers may be important to the function of these specialized distal limb muscles during locomotion.

Differences in the metabolic properties of gluteus medius and superficial digital flexor muscles and the effect of water treadmill training in the horse

REASONS FOR PERFORMING STUDY

Flexor tendon injury may be due to flexor muscle fatigue, contributing to fetlock joint hyperextension and tendon damage. A water treadmill provides resistance training on flexor tendon muscles, which might reduce the risk of tendon injury.

OBJECTIVE

To determine the effect of water treadmill training on the properties of the gluteal and superficial digital flexor (SDF) muscles and on cardiocirculatory response to a standardised exercise test.

METHODS

Five healthy unfit horses were trained on a water treadmill for 5 days/week for 4 weeks, starting with 5 min/day increasing to 20 min/day. Before and after the water treadmill training, an incremental SET was performed on a land treadmill to determine velocity at a heart rate 200 beats/min (V(200)) and resting gluteal and SDF muscle biopsies were obtained for biochemical analyses.

RESULTS

There was no measurable difference in resting concentrations of gluteal or SDF muscle glycogen, lactate, ATP or glucose-6-phosphate (G6P), or activities of citrate synthase (CS), 3-hydroxyacyl CoA dehydrogenase (HAD) and lactate dehydrogenase (LDH) after training and no change in V(200), Lactate, glycogen, G6P and ATP concentrations were 50% lower and type 1 fibres 30% higher in SDF compared to gluteal muscles. CS and HAD activities were similar between SDF and gluteal, while LDH was lower in the SDF muscle.

CONCLUSIONS

A more strenuous water treadmill conditioning protocol may be needed to induce a training effect in gluteal and SDF muscle and heart rate response. The low substrate concentrations and oxidative capacity of SDF may predispose this muscle to catastrophic fatigue during maximal exercise.

Contractile properties of muscle fibers from the deep and superficial digital flexors of horses

Equine digital flexor muscles have independent tendons but a nearly identical mechanical relationship to the main joint they act upon. Yet these muscles have remarkable diversity in architecture, ranging from long, unipennate fibers ("short" compartment of DDF) to very short, multipennate fibers (SDF). To investigate the functional relevance of the form of the digital flexor muscles, fiber contractile properties were analyzed in the context of architecture differences and in vivo function during locomotion. Myosin heavy chain (MHC) isoform fiber type was studied, and in vitro motility assays were used to measure actin filament sliding velocity (V(f)). Skinned fiber contractile properties [isometric tension (P(0)/CSA), velocity of unloaded shortening (V(US)), and force-Ca(2+) relationships] at both 10 and 30°C were characterized. Contractile properties were correlated with MHC isoform and their respective V(f). The DDF contained a higher percentage of MHC-2A fibers with myosin (heavy meromyosin) and V(f) that was twofold faster than SDF. At 30°C, P(0)/CSA was higher for DDF (103.5 ± 8.75 mN/mm(2)) than SDF fibers (81.8 ± 7.71 mN/mm(2)). Similarly, V(US) (pCa 5, 30°C) was faster for DDF (2.43 ± 0.53 FL/s) than SDF fibers (1.20 ± 0.22 FL/s). Active isometric tension increased with increasing Ca(2+) concentration, with maximal Ca(2+) activation at pCa 5 at each temperature in fibers from each muscle. In general, the collective properties of DDF and SDF were consistent with fiber MHC isoform composition, muscle architecture, and the respective functional roles of the two muscles in locomotion.

Neuroanatomy of the equine dorsal cricoarytenoid muscle: surgical implications

REASON FOR PERFORMING STUDY

Studies are required to define more accurately and completely the neuroanatomy of the equine dorsal cricoarytenoid muscle as a prerequisite for developing a neuroprosthesis for recurrent laryngeal neuropathy.

OBJECTIVES

To describe the anatomy, innervation, fibre types and function of the equine dorsal cricoarytenoid muscle.

METHODS

Thirty-one larynges were collected at necropsy from horses with no history of upper airway disease and 25 subjected to gross dissection. Thereafter, the following preparations were made on a subset of larynges: histochemical staining (n = 5), Sihler's and acetylcholinesterase staining for motor endplates (n = 2). An additional 6 larynges were collected and used for a muscle stimulation study.

RESULTS

Two neuromuscular compartments (NMC), each innervated by a primary nerve branch of the recurrent laryngeal nerve, were identified in all larynges. Stimulation of the lateral NMC produced more lateral displacement of the arytenoid cartilage than the medial NMC (P<0.05). The medial NMC tended to rotate the arytenoid cartilage dorsally. Motor endplates were identified at the junction of the middle and caudal thirds of each NMC. If fibre type grouping was present it was always present in both NMCs.

CONCLUSIONS

The equine dorsal cricoarytenoid muscle has 2 distinct muscle NMCs with discrete innervation and lines of action. The lateral NMC appears to have a larger role in increasing cross-sectional area of the rima glottidis.

POTENTIAL RELEVANCE

This information should assist in planning surgical reinnervation procedures and development of a neuroprosthesis for recurrent laryngeal neuropathy.

Horse soleus muscle: postural sensor or vestigial structure?

The soleus muscle of horses is rather diminutive with respect to the overall size of adjacent synergist muscles in the hind limb of the horse. Whether or not such a muscle might be vestigial or may be providing some essential function has not been determined. We have studied the horse's soleus muscle using histochemical (ATPase), immunocytochemical (myosin isoform identification), and SDS-PAGE analysis to demonstrate that it is largely composed of 100% type I, presumed slow-twitch fibers. Only one soleus muscle studied (out of 13 adult horses) contained any type II muscle fibers. Given this consistent high percentage of slow-oxidative fibers, we hypothesized that the soleus muscle could have a significant role in proprioceptive function, essentially functioning as a proprioceptive organ instead of a significant force-generating muscle during locomotion. We tested this by examining three whole soleus muscles and assessing their muscle spindle content, which proved to have a spindle index of about 12. This value provided equivocal support for the hypothesis since it did not approach values reported for other mammalian proprioceptive muscles that were approximately 40-50 spindles per gram of muscle mass. Other parameters, such as motoneuron number and muscle unit size, may be useful in understanding these data.

Muscular design in the equine interosseus muscle

We studied the forelimb interosseus muscle in horses, Equus caballus, to determine the muscular properties inherent in its function. Some authors have speculated that the equine interosseus contains muscle fibers at birth only to undergo loss of these fibers through postnatal ontogeny. We describe the muscle fibers in eight interosseus specimens from adult horses. These fibers were studied histochemically using myosin ATPase studies and immunocytochemically using several antibodies directed against type I and type II myosin heavy chain antibodies. We determined that 95% of the fibers were type I, presumed slow-twitch fibers. All fibers exhibited normal morphological appearance in terms of fiber diameter and cross-sectional area, suggesting that the muscles are undergoing normal cycles of recruitment. SDS-PAGE studies of myosin heavy chain isoforms were consistent with these observations of primarily slow-twitch muscle. Fibers were determined to be approximately 800 microm long when studied using nitric acid digestion protocols. Short fiber length combined with high pinnation angles suggest that the interosseus muscle is able to generate large amounts of force but can produce little work (measured as pulling the distal tendon proximally). While the equine interosseus muscle has undergone a general reduction of muscle content during its evolution, it remains composed of a significant muscular component that likely contributes to forelimb stability and elastic storage of energy during locomotion.

Functional specialisation of pelvic limb anatomy in horses (Equus caballus)

We provide quantitative anatomical data on the muscle-tendon units of the equine pelvic limb. Specifically, we recorded muscle mass, fascicle length, pennation angle, tendon mass and tendon rest length. Physiological cross sectional area was then determined and maximum isometric force estimated. There was proximal-to-distal reduction in muscle volume and fascicle length. Proximal limb tendons were few and, where present, were relatively short. By contrast, distal limb tendons were numerous and long in comparison to mean muscle fascicle length, increasing potential for elastic energy storage. When compared with published data on thoracic limb muscles, proximal pelvic limb muscles were larger in volume and had shorter fascicles. Distal limb muscle architecture was similar in thoracic and pelvic limbs with the exception of flexor digitorum lateralis (lateral head of the deep digital flexor), the architecture of which was similar to that of the pelvic and thoracic limb superficial digital flexors, suggesting a functional similarity.

The role of the extrinsic thoracic limb muscles in equine locomotion

Muscles have two major roles in locomotion: to generate force and to absorb/generate power (do work). Economical force generation is achieved by short-fibred pennate muscle while the maximum power output of a muscle is architecture independent. In this study we tested the hypothesis that there is an anatomical and structural separation between the force-generating anti-gravity muscles and the propulsive (limb/trunk moving) muscles of the equine forelimb. Muscle mass and fascicle length measurements were made on the thoracic limb extrinsic muscles of six fresh horse cadavers. Physiological cross-sectional area and maximum isometric force were then estimated. Maximum power was estimated from muscle volume and published contraction velocity data. The majority of extrinsic forelimb muscles were large with long fascicles arranged in parallel to the long axis of the muscle. Muscles arranged in this way are optimised for doing work. The architecture of serratus ventralis thoracis (SVT) was unique. It had short (48 +/- 17 mm) fascicles, arranged at about 45 degrees to the long axis of the muscle, which would suggest a force-generating, anti-gravity role. The muscle belly of SVT was sandwiched between two broad, thick sheets of aponeurosis. Hence, SVT could make a significant contribution to the overall elastic properties of the thoracic limb.

The role of the extrinsic thoracic limb muscles in equine locomotion

Muscles have two major roles in locomotion: to generate force and to absorb/generate power (do work). Economical force generation is achieved by short-fibred pennate muscle while the maximum power output of a muscle is architecture independent. In this study we tested the hypothesis that there is an anatomical and structural separation between the force-generating anti-gravity muscles and the propulsive (limb/trunk moving) muscles of the equine forelimb. Muscle mass and fascicle length measurements were made on the thoracic limb extrinsic muscles of six fresh horse cadavers. Physiological cross-sectional area and maximum isometric force were then estimated. Maximum power was estimated from muscle volume and published contraction velocity data. The majority of extrinsic forelimb muscles were large with long fascicles arranged in parallel to the long axis of the muscle. Muscles arranged in this way are optimised for doing work. The architecture of serratus ventralis thoracis (SVT) was unique. It had short (48 +/- 17 mm) fascicles, arranged at about 45 degrees to the long axis of the muscle, which would suggest a force-generating, anti-gravity role. The muscle belly of SVT was sandwiched between two broad, thick sheets of aponeurosis. Hence, SVT could make a significant contribution to the overall elastic properties of the thoracic limb.

Passive and active mechanical properties of the superficial and deep digital flexor muscles in the forelimbs of anesthetized Thoroughbred horses

The superficial (SDF) and deep digital flexor (DDF) muscles are critical for equine forelimb locomotion. Knowledge of their mechanical properties will enhance our understanding of limb biomechanics. Muscle contractile properties derived from architectural-based algorithms may overestimate real forces and underestimate shortening capacity because of simplistic assumptions regarding muscle architecture. Therefore, passive and active (=total - passive) force-length properties of the SDF and DDF muscles were measured directly in vivo. Muscles from the right forelimbs of four Thoroughbred horses were evaluated during general anesthesia. Limbs were fixed to an external frame with the muscle attached to a linear actuator and load cell. Each muscle was stretched from an unloaded state to a range of prefixed lengths, then stimulated while held at that length. The total force did not exceed 4000 N, the limit for the clamping device. The SDF and DDF muscles produced 716+/-192 and 1577+/-203 N maximum active isometric force (F(max)), had ascending force-length ranges (R(asc)) of 5.1+/-0.2 and 9.1+/-0.4 cm, and had passive stiffnesses of 1186+/-104 and 1132+/-51 N/cm, respectively. The values measured for F(max) were much smaller than predicted based on conservative estimates of muscle specific tension and muscle physiological cross-sectional area. R(asc) were much larger than predicted based on muscle fiber length estimates. These data suggest that accurate prediction of the active mechanical behavior of architecturally complex muscles such as the equine DDF and SDF requires more sophisticated algorithms.

Determination of muscle architecture and fiber characteristics of the superficial and deep digital flexor muscles in the forelimbs of adult horses

OBJECTIVE

To provide a quantitative description of the architecture of superficial digital flexor (SDF) and deep digital flexor (DDF) muscles in adult horses to predict muscle-tendon behavior and estimate muscle forces.

SAMPLE POPULATION

7 forelimb specimens from 7 adult Thoroughbreds.

PROCEDURE

Muscle and tendon lengths and volumes were measured from 6 fixed forelimbs. After processing, fiber bundle and sarcomere lengths were measured. Optimal fascicle lengths and muscle length-to-fascicle length, muscle length-to-free tendon length, and fascicle length-to-tendon length ratios were calculated, as were tendon and muscle physiologic cross-sectional areas (PCSAs). Pennation angles were measured in 1 embalmed specimen.

RESULTS

The SDF optimal fascicle lengths were uniformly short (mean +/- SD, 0.8 +/- 0.1 cm), whereas DDF lengths ranged from 0.9 +/- 0.2 cm to 10.8 +/- 1.6 cm. The DDF humeral head had 3 architectural subunits, each receiving a separate median nerve branch, suggestive of neuromuscular compartmentalization. Pennation angles were small (10 degrees to 25 degrees). The PCSAs of the SDF and DDF muscle were 234 +/- 51 cm2 and 259 +/- 30 cm2, with estimated forces of 4,982 +/- 1148 N and 5,520 +/- 544 N, respectively.

CONCLUSIONS AND CLINICAL RELEVANCE

The SDF muscle appears to provide strong tendinous support with little muscle fascicular shortening and fatigue-resistance properties. The DDF muscle combines passive and dynamic functions with larger tension development and higher shortening velocities during digital motion. Architectural parameters are useful for estimation of forces and have implications for analysis of muscle-tendon function, surgical procedures involving muscle-tendon lengthening, and biomechanical modeling.

An in vivo equine forelimb model for short-term recording of peak isometric force in the superficial and deep digital flexor muscles

OBJECTIVE

To develop and test an experimental model for in vivo short-term recording of peak isometric forces of the digital flexor muscles in the forelimb of adult horses.

STUDY DESIGN

In vivo experimental study.

SAMPLE POPULATION

Four healthy, anesthetized, adult Thoroughbred horses (3 to 7 years old; 527 +/- 87 kg)

METHODS

In dorsal recumbency, ulnar and median nerves were exposed and instrumented with insulated bipolar cuff stimulation electrodes for later connection to an electrical stimulator. In left lateral recumbency, a biplanar fixator was applied to the right humerus and a custom-made, rigid, aluminum frame connected to it, to allow loading of muscles distal to the fixator. Threaded transfixation pins through the radial and metacarpal condyles were clamped to the rigid frame so that the humerus, radius, ulna, and metacarpus were fixed in position. Each digital flexor muscle insertion tendon was transected just above the metacarpophalangeal joint, extracted from the carpal canal, and secured in a metal clamp positioned at the distal myotendinous (MT) junction. Distally, the clamp was connected in series to a load cell and a pneumatic actuator to record force and to maintain muscle length during nerve stimulation. A linear potentiometer was connected in parallel to the actuator to record MT junction position. Initial trials were conducted to identify median and ulnar nerve stimulation variables to achieve maximal muscle contraction. Isometric contractions were performed at different muscle lengths and peak forces registered during 3 seconds of supramaximal dual (ulnar and median) nerve stimulation.

RESULTS

A stimulation voltage of 2.5 to 5.0 V at 50 Hz usually produced maximal force for both the superficial digital flexor (SDF) and deep digital flexor (DDF) muscles. Single ulnar and median nerve stimulation elicited force development not only in the DDF muscle but also in the SDF muscle. At voltages higher than 1 V, normalized force was greatest with combined median and ulnar nerve stimulation for both the DDF and SDF muscles; however, normalized force was greater for median nerve stimulation than ulnar nerve stimulation in the DDF muscle, and the opposite relationship was observed for the SDF muscle. Final recording of dual supramaximal nerve stimulation of SDF and DDF muscles resulted in peak isometric forces of 716 +/- 192 N and 1,577 +/- 203 N, respectively.

CONCLUSIONS

The instrumentation technique and experimental protocol enabled recording of peak isometric forces in the SDF and DDF muscles of anesthetized adult horses.

CLINICAL RELEVANCE

Studies using this model will improve knowledge of SDF and DDF muscle mechanics with insight to functional implications of the complex architecture of these muscles. Knowledge of the dynamic performance of the SDF and DDF muscles would also be useful for the development of new treatment strategies for flexor deformities and tendon injuries in horses.

Determination of passive mechanical properties of the superficial and deep digital flexor muscle-ligament-tendon complexes in the forelimbs of horses

OBJECTIVE

To determine the relative contributions of the muscles, tendons, and accessory ligaments to the passive force-length properties of the superficial (SDF) and deep digital flexor (DDF) myotendinous complexes.

SAMPLE POPULATION

8 cadaveric forelimbs from 6 adult Thoroughbreds.

PROCEDURE

In vitro, limb configurations during slack position and myotendinous lengths during subsequent axial loading of forelimbs were recorded before and after transection of accessory ligaments. Expressions were derived to describe the force-length behavior of each muscle, tendon, and accessory ligament-tendon unit; linear stiffness was computed for these components. The elastic modulus was established for the SDF and DDF tendons. RESULTS; Linear stiffness was 2.80 +/- 0.38 kN/cm for the SDF muscle, 3.47 +/- 0.66 kN/cm for the DDF muscle, 2.73 +/- 0.18 kN/cm for the SDF tendon, 3.22 +/- 0.20 kN/cm for the DDF tendon, 6.46 +/- 0.85 kN/cm for the SDF accessory ligament, 1.93 +/- 0.11 kN/cm for the SDF accessory ligament-tendon unit, and 2.47 +/- 0.11 kN/cm for the DDF accessory ligament-tendon unit. The elastic modulus for the SDF and DDF tendons was 920 +/- 77 and 843 +/- 56 MPa, respectively.

CONCLUSIONS AND CLINICAL RELEVANCE

Both the muscle-tendon and ligament-tendon portions of SDF and DDF myotendinous complexes had important roles in supporting the forelimb of horses. Although muscle tension can be enhanced by elbow joint flexion and active contraction, the accessory ligaments transmitted more force to the distal tendons than did the muscles under the conditions tested.

Anatomy and histochemistry of spread-wing posture in birds. 3. Immunohistochemistry of flight muscles and the ?shoulder lock? in albatrosses

As a postural behavior, gliding and soaring flight in birds requires less energy than flapping flight. Slow tonic and slow twitch muscle fibers are specialized for sustained contraction with high fatigue resistance and are typically found in muscles associated with posture. Albatrosses are the elite of avian gliders; as such, we wanted to learn how their musculoskeletal system enables them to maintain spread-wing posture for prolonged gliding bouts. We used dissection and immunohistochemistry to evaluate muscle function for gliding flight in Laysan and Black-footed albatrosses. Albatrosses possess a locking mechanism at the shoulder composed of a tendinous sheet that extends from origin to insertion throughout the length of the deep layer of the pectoralis muscle. This fascial "strut" passively maintains horizontal wing orientation during gliding and soaring flight. A number of muscles, which likely facilitate gliding posture, are composed exclusively of slow fibers. These include Mm. coracobrachialis cranialis, extensor metacarpi radialis dorsalis, and deep pectoralis. In addition, a number of other muscles, including triceps scapularis, triceps humeralis, supracoracoideus, and extensor metacarpi radialis ventralis, were found to have populations of slow fibers. We believe that this extensive suite of uniformly slow muscles is associated with sustained gliding and is unique to birds that glide and soar for extended periods. These findings suggest that albatrosses utilize a combination of slow muscle fibers and a rigid limiting tendon for maintaining a prolonged, gliding posture.

Architectural properties of distal forelimb muscles in horses, Equus caballus

Articular injuries in athletic horses are associated with large forces from ground impact and from muscular contraction. To accurately and noninvasively predict muscle and joint contact forces, a detailed model of musculoskeletal geometry and muscle architecture is required. Moreover, muscle architectural data can increase our understanding of the relationship between muscle structure and function in the equine distal forelimb. Muscle architectural data were collected from seven limbs obtained from five thoroughbred and thoroughbred-cross horses. Muscle belly rest length, tendon rest length, muscle volume, muscle fiber length, and pennation angle were measured for nine distal forelimb muscles. Physiological cross-sectional area (PCSA) was determined from muscle volume and muscle fiber length. The superficial and deep digital flexor muscles displayed markedly different muscle volumes (227 and 656 cm3, respectively), but their PCSAs were very similar due to a significant difference in muscle fiber length (i.e., the superficial digital flexor muscle had very short fibers, while those of the deep digital flexor muscle were relatively long). The ulnaris lateralis and flexor carpi ulnaris muscles had short fibers (17.4 and 18.3 mm, respectively). These actuators were strong (peak isometric force, Fmax=5,814 and 4,017 N, respectively) and stiff (tendon rest length to muscle fiber length, LT:LMF=5.3 and 2.1, respectively), and are probably well adapted to stabilizing the carpus during the stance phase of gait. In contrast, the flexor carpi radialis muscle displayed long fibers (89.7 mm), low peak isometric force (Fmax=555 N), and high stiffness (LT:LMF=1.6). Due to its long fibers and low Fmax, flexor carpi radialis appears to be better adapted to flexion and extension of the limb during the swing phase of gait than to stabilization of the carpus during stance. Including muscle architectural parameters in a musculoskeletal model of the equine distal forelimb may lead to more realistic estimates not only of the magnitudes of muscle forces, but also of the distribution of forces among the muscles crossing any given joint.

Force- and moment-generating capacities of muscles in the distal forelimb of the horse

A detailed musculoskeletal model of the distal equine forelimb was developed to study the influence of musculoskeletal geometry (i.e. muscle paths) and muscle physiology (i.e. force-length properties) on the force- and moment-generating capacities of muscles crossing the carpal and metacarpophalangeal joints. The distal forelimb skeleton was represented as a five degree-of-freedom kinematic linkage comprised of eight bones (humerus, radius and ulna combined, proximal carpus, distal carpus, metacarpus, proximal phalanx, intermediate phalanx and distal phalanx) and seven joints (elbow, radiocarpal, intercarpal, carpometacarpal, metacarpophalangeal (MCP), proximal interphalangeal (pastern) and distal interphalangeal (coffin)). Bone surfaces were reconstructed from computed tomography scans obtained from the left forelimb of a Thoroughbred horse. The model was actuated by nine muscle-tendon units. Each unit was represented as a three-element Hill-type muscle in series with an elastic tendon. Architectural parameters specifying the force-producing properties of each muscle-tendon unit were found by dissecting seven forelimbs from five Thoroughbred horses. Maximum isometric moments were calculated for a wide range of joint angles by fully activating the extensor and flexor muscles crossing the carpus and MCP joint. Peak isometric moments generated by the flexor muscles were an order of magnitude greater than those generated by the extensor muscles at both the carpus and the MCP joint. For each flexor muscle in the model, the shape of the maximum isometric joint moment-angle curve was dominated by the variation in muscle force. By contrast, the moment-angle curves for the muscles that extend the MCP joint were determined mainly by the variation in muscle moment arms. The suspensory and check ligaments contributed more than half of the total support moment developed about the MCP joint in the model. When combined with appropriate in vivo measurements of joint kinematics and ground-reaction forces, the model may be used to determine muscle-tendon and joint-reaction forces generated during gait.

In vitro evaluation of nonrigid support systems for the equine metacarpophalangeal joint

Metacarpophalangeal (MCP) joint extension is primarily resisted by the digital flexor tendons and suspensory ligament. A variety of external support techniques are used to protect these supporting structures from or after injury by resisting MCP joint extension, although not all are effective and/or practical for use in an exercising horse. In this study, 7 forelimbs were loaded in vitro to determine the effect of a simple gamgee bandage, a 3-layered bandage with and without a contoured palmar splint, a neoprene exercise boot, and an innovative carbon fibre composite exercise boot (Dalmar tendon support boot). There was no significant resistance to MCP joint extension by the gamgee or neoprene exercise boot. The 3-layered bandage had a significant (P<0.01) supporting effect at MCP angles of > or = 245 degrees, and when combined with the contoured splint at angles of > or = 230 degrees. The Dalmar tendon support boot resisted MCP extension at angles of > or = 245 degrees (settings 1 and 2) and > or = 225 degrees (setting 3). These data demonstrate that the contoured splint and the Dalmar tendon support boot (which is also easily fitted for use during exercise) are useful for the management of tendon/ligament injury and during rehabilitation.

Overview of horse body composition and muscle architecture: implications for performance

Locomotion requires skeletal muscle to sustain and generate force. A muscle's force potential is proportional to its weight. Since the larger the muscle the larger its potential power output, a better understanding of the proportion of skeletal muscle a horse possesses may lead to a better understanding of horse performance. Several techniques exist to assess body composition, which include dual energy X-ray absorption, underwater (hydrostatic) weighing, derivation from total body water, bio-electric impedance, air displacement, body condition scoring, cadaver dissection and ultrasound. The relevance of each method to the equine industry will be discussed as will the practical information that the existing horse body composition studies have provided. Attention will be given to the data regarding the implications of body composition on the performance horse. The limited number of studies discussing different varieties of muscle architectures and the functional importance of these muscles will also be addressed. These body composition data may provide a better understanding of important issues in horse care that can lead to more optimal horse care techniques and a healthier and safer environment for horses.

Horses damp the spring in their step

The muscular work of galloping in horses is halved by storing and returning elastic strain energy in spring-like muscle-tendon units.These make the legs act like a child's pogo stick that is tuned to stretch and recoil at 2.5 strides per second. This mechanism is optimized by unique musculoskeletal adaptations: the digital flexor muscles have extremely short fibres and significant passive properties, whereas the tendons are very long and span several joints. Length change occurs by a stretching of the spring-like digital flexor tendons rather than through energetically expensive length changes in the muscle. Despite being apparently redundant for such a mechanism, the muscle fibres in the digital flexors are well developed. Here we show that the mechanical arrangement of the elastic leg permits it to vibrate at a higher frequency of 30-40 Hz that could cause fatigue damage to tendon and bone. Furthermore, we show that the digital flexor muscles have minimal ability to contribute to or regulate significantly the 2.5-Hz cycle of movement, but are ideally arranged to damp these high-frequency oscillations in the limb.

The force and contact stress on the navicular bone during trot locomotion in sound horses and horses with navicular disease

Mechanical overload due to poor conformation or shoeing has been suggested to contribute to the development of navicular disease. While studies have determined the compressive force exerted on the navicular bone in normal horses, this has not been reported for horses with navicular disease. Also, the force has not been converted to stress by correction for contact area. In this study we developed a technique for the determination of the contact area between the deep digital flexor tendon and the navicular bone in vivo, and used a forceplate system to determine the force and stress on the bone at trot in 6 normal and eight diseased horses. The mean +/- s.d. peak force and peak stress were 5.62+/-1.45 N/kg and 2.74+/-0.76 MPa for the normal group and 6.97+/-1.50 N/kg and 3.07+/-0.55 MPa for the navicular disease group. The peak force and peak stress were similar for both groups but the force and stress in the horses with navicular disease were approximately double control group values early in the stance phase. This was due to a higher force in the deep digital flexor tendon, which was attributed to a contraction of the deep digital flexor muscle in early stance in an attempt to unload the heels.

The effect of bilateral palmar digital nerve analgesia on the compressive force experienced by the navicular bone in horses with navicular disease

Horses with navicular disease have an increased load on the navicular bone in early stance. This has been suggested to be a response to pain in the heel region. Seven horses with clinical, radiographic and scintigraphic signs of navicular disease underwent forceplate and kinematic analysis before and after desensitisation of the heel region with a bilateral palmar digital nerve block. The compressive force exerted on the navicular bone during stance, and stride kinematics, were determined in each state. After regional analgesia of the palmar digital nerves (PDNB) the compressive force on the navicular bone was lower throughout stance. The mean +/- s.d. peak force at the beginning of stance was 7.05+/-1.10 N/kg before, and 6.46+/-1.15 N/kg after PDNB (P = 0.01) and at the end of stance the mean peak values were 5.00+/-2.05 N/kg before, and 4.39+/-1.65 N/kg after PDNB (P = 0.05). We explained this finding as indicating that the horse responds to heel pain (including pain in the navicular region) by contracting the deep digital flexor muscle to unload the heels. This increases the compressive load on the navicular bone, which may cause remodelling and, in some horses, damage to the overlying flexor cartilage, which is then painful and identified as navicular disease. This mechanism identifies navicular disease as a possible end point for a variety of heel related conditions.

Anatomy and histochemistry of spread-wing posture in birds. 2. Gliding flight in the California gull, Larus californicus: a paradox of fast fibers and posture

Gliding flight is a postural activity which requires the wings to be held in a horizontal position to support the weight of the body. Postural behaviors typically utilize isometric contractions in which no change in length takes place. Due to longer actin-myosin interactions, slow contracting muscle fibers represent an economical means for this type of contraction. In specialized soaring birds, such as vultures and pelicans, a deep layer of the pectoralis muscle, composed entirely of slow fibers, is believed to perform this function. Muscles involved in gliding posture were examined in California gulls (Larus californicus) and tested for the presence of slow fibers using myosin ATPase histochemistry and antibodies. Surprisingly small numbers of slow fibers were found in the M. extensor metacarpi radialis, M. coracobrachialis cranialis, and M. coracobrachialis caudalis, which function in wrist extension, wing protraction, and body support, respectively. The low number of slow fibers in these muscles and the absence of slow fibers in muscles associated with wing extension and primary body support suggest that gulls do not require slow fibers for their postural behaviors. Gulls also lack the deep belly to the pectoralis found in other gliding birds. Since bird muscle is highly oxidative, we hypothesize that fast muscle fibers may function to maintain wing position during gliding flight in California gulls.

Ontogeny of the pectoralis muscle in the little brown bat, Myotis lucifugus

The ontogeny of a primary flight muscle, the pectoralis, in the little brown bat (Myotis lucifugus: Vespertilionidae) was studied using histochemical, immunocytochemical, and electrophoretic techniques. In fetal and early neonatal (postnatal age 1-6 days) Myotis, histochemical techniques for myofibrillar ATPase (mATPase) and antibodies for slow and fast myosins demonstrated the presence of two fiber types, here called types I and IIa. These data correlated with multiple transitional myosin heavy chain isoforms and native myosin isoforms demonstrated with SDS-PAGE and 4% pyrophosphate PAGE. There was a decrease in the distribution and number of type I fibers with increasing postnatal age. At postnatal age 8-9 days, the adult phenotype was observed with regard to muscle fiber type (100% type IIa fibers) and myosin isoform profile (single adult MHC and native myosin isoforms). This "adult" fiber type profile and myosin isoform composition preceded adult function by about 2 weeks. For example, little brown bats were incapable of sustained flight until approximately postnatal day 24, and myofiber size did not achieve adult size until approximately postnatal day 25. Although Myotis pectoralis is unique in being composed of 100% type IIa fibers, transitional fiber types and isoforms were present. These transitional forms had been observed previously in other mammals bearing mixed adult muscle fibers and which undergo transitional stages in muscle ontogeny. However, in Myotis pectoralis, this transition transpires relatively early in development.

Histochemical and myosin composition of vampire bat (Desmodus rotundus) pectoralis muscle targets a unique locomotory niche

The vampire bat pectoralis muscle contains at least four fiber types distributed in a nonhomogeneous pattern. One of these fiber types, here termed IIe, can be elucidated only by adenosine triphosphatase (ATPase) histochemistry combined with reactions against antifast and antislow myosin antibodies. The histochemical and immunohistochemical observations indicate a well-developed specialization of function within specific regions of the muscle. In parallel, analyses of native myosin isoforms and myosin heavy chain isoforms indicate two points. First, the histochemical "type IIe" fiber is predominant in cranial portions of the muscle, and myosin extracted from these regions exhibits a unique electrophoretic mobility not observed in the myosin isoforms of more traditional laboratory mammals. Second, the type I fibers are confined to the pectoralis abdominalis muscle and a small adjacent region of the caudal part of the pectoralis. This pattern of type I fiber distribution is considered a derived character state compared to muscle histochemical phenotype and isoform composition in the pectoralis muscles of other phyllostomids we have studied (Artibeus jamaicensis, Artibeus lituratus, Carollia perspicillata). We relate this to the unique locomotory needs of the common vampire bat, Desmodus rotundus.