Role of peptide self-assembly in antimicrobial peptides

Probing the relationships between self-assembly and the antimicrobial activity of amyloidogenic peptides: The islet amyloid polypeptide as a case study

Antimicrobial peptides (AMPs) are key components of the innate immune system across diverse organisms. Interestingly, some AMPs can adopt β-sheet secondary structure and self-assemble into amyloid-like fibrils. Recent works have also revealed that amyloidogenic peptides exhibit antimicrobial properties and share a common mechanism of plasma membrane perturbation with AMPs. In this study, we explored the relationships between the antimicrobial activity of amyloidogenic peptides and their self-assembly by using the islet amyloid polypeptide (IAPP) as a model. IAPP is an aggregation-prone 37-residue hormone whose pancreatic deposition and accumulation are associated with type II diabetes. Antimicrobial assays revealed that IAPP monomers and prefibrillar aggregates, including soluble oligomers, inhibit the growth of Escherichia coli and Staphylococcus epidermidis. Additionally, monomeric and prefibrillar proteospecies perturbed anionic lipid vesicles that mimic bacterial plasma membrane and decrease the metabolic activity. In contrast, pre-assembled amyloid fibrils exhibited weak antimicrobial activities and lipid membrane perturbation, although they agglutinated bacteria avidly. By taking advantage of residue-specific substitutions that modulate the aggregation propensity, we observed that derivatives with hindered amyloidogenicity retained antimicrobial activities, while those with accelerated kinetics of amyloid self-assembly had weaker antimicrobial effect. Moreover, by modulating the propensity of IAPP to fold into an α-helix, we observed that amyloid formation is not a prerequisite for the antimicrobial activity, while the destabilization of helical folding reduced IAPP antimicrobial activity. This study provides fundamental mechanistic insights of the modest antimicrobial activity of IAPP and highlights that precaution should be taken before generalizing the antimicrobial potential of self-assembling amyloid polypeptides.

Antimicrobial peptides and their application to combat implant-associated infections - opportunities and challenges

Despite minimally invasive surgeries and advancements in aseptic techniques, implant-associated infections are a significant complication in post-surgical implantation of medical devices. The standard practice of systemic antibiotic administration is often ineffective due to the development of bacterial antibiotic resistance, poor antibiotic penetration into biofilms, and low antibiotic bioavailability at the infected site. Infected implants are typically salvaged by tissue resection and antibacterial reinforcements during revision surgery. Towards this end, antimicrobial peptides (AMPs) have emerged as a promising alternative to traditional antibiotics to combat infections. Herein, a comprehensive overview of antimicrobial peptides, their structure and function, comparison with conventional antibiotics, antimicrobial properties, mechanisms of action of AMPs, and bacterial resistance to AMPs in relation to antibiotics are discussed. Furthermore, stimuli-responsive AMP delivery and contact killing via AMP coatings on implant surfaces are deliberated. We discuss various methods of AMP immobilization and coatings on implant materials through physico-chemical coating strategies. The review also addresses the clinical status and current limitations of AMP coatings such as proteolytic instability and potential cytotoxicity. Finally, we conclude with future directions to develop small, effective AMP mimetics and encapsulation of AMPs within nanocarriers to improve antimicrobial properties and design-controlled release systems for sustained antimicrobial activity.

AMPCliff: Quantitative definition and benchmarking of activity cliffs in antimicrobial peptides

INTRODUCTION

Activity cliff (AC) is a phenomenon that a pair of similar molecules differ by a small structural alternation but exhibit a large difference in their biochemical activities. This phenomenon affects various tasks ranging from virtual screening to lead optimization in drug development. The AC of small molecules has been extensively investigated but limited knowledge is accumulated about the AC phenomenon in pharmaceutical peptides with canonical amino acids.

OBJECTIVES

This study introduces a quantitative definition and benchmarking framework AMPCliff for the AC phenomenon in antimicrobial peptides (AMPs) composed by canonical amino acids.

METHODS

This study establishes a benchmark dataset of paired AMPs in Staphylococcus aureus from the publicly available AMP dataset GRAMPA, and conducts a rigorous procedure to evaluate various AMP AC prediction models, including nine machine learning, four deep learning algorithms, four masked language models, and four generative language models.

RESULTS

A comprehensive analysis of the existing AMP dataset reveals a significant prevalence of AC within AMPs. AMPCliff quantifies the activities of AMPs by the metric minimum inhibitory concentration (MIC), and defines 0.9 as the minimum threshold for the normalized BLOSUM62 similarity score between a pair of aligned peptides with at least two-fold MIC changes. Our analysis reveals that these models are capable of detecting AMP AC events and the pre-trained protein language model ESM2 demonstrates superior performance across the evaluations. The predictive performance of AMP activity cliffs remains to be further improved, considering that ESM2 with 33 layers only achieves the Spearman correlation coefficient 0.4669 for the regression task of the -log(MIC) values on the benchmark dataset.

CONCLUSION

Our findings highlight limitations in current deep learning-based representation models. To more accurately capture the properties of antimicrobial peptides (AMPs), it is essential to integrate atomic-level dynamic information that reflects their underlying mechanisms of action.

Amphipathic Antimicrobial Peptides Illuminate a Reciprocal Relationship Between Self-assembly and Cytolytic Activity

Amphipathic character, encoded within the polar sequence patterns of antimicrobial peptides, is a critical structural feature that influences membrane disruptive behavior. Similarly, polar sequence patterns induce self-assembly of amphipathic peptides, which results in the formation of ordered supramolecular structures. The relationship between self-assembly and membrane activity remains an open question of relevance for the development of effective antimicrobial peptides. Here, we report the structural investigation of a class of lytic peptides that self-assemble into filamentous nanomaterials. CryoEM analysis was employed to determine the structure of one of the filaments, which revealed that the peptides are self-assembled into a bilayer nanotube, in which the interaction between layers of amphipathic α-helices was mediated through hydrophobic interactions. The relative stability of the filament peptide assemblies depended on the influence of sequence modifications on the helical conformation. Antimicrobial assays indicated that cytolytic activity was associated with dynamic disassociation of the filamentous assemblies under the assay conditions. Structural modifications of the peptides that stabilized the filaments abrogated lytic activity. These results illuminate a reciprocal relationship between self-assembly and antimicrobial activity in this class of amphipathic peptides and that reversible assembly was critical for the observation of biological activity.

SAAP-148 Oligomerizes into a Hexamer Forming a Hydrophobic Inner Core

Human cathelicidin LL-37 derivative, the 24-mer SAAP-148, is highly effective in vitro in eradicating multidrug-resistant bacteria without inducing resistance. SAAP-148 has a high cationic charge (+11) and 46% hydrophobicity, which, once the peptide folds into an alpha helix, forms a wide hydrophobic face. This highly amphipathic nature facilitates on the one hand its insertion into the membrane's fatty acyl chain region and on the other hand it´s interaction with anionic membrane components, which aids in killing bacteria. However, the contributions of the secondary and quaternary structures have not been thoroughly investigated so far. To address this, we applied circular dichroism, NMR spectroscopy, X-ray scattering, AlphaFold 3 protein folding software, and molecular dynamics simulations. Our results reveal that SAAP-148 adopts a stable hexameric bundle composed of three parallel dimers, that together form a hydrophobic core of aromatic side chain residues. The hexameric structure is retained at the membrane interface, whereby, MD simulation studies indicated the formation of a fiber-like structure in the presence of anionic membranes. This certainly seems plausible, as oligomers are stabilized by aromatic residues, and the exposure of positively charged side chains on the surface likely facilitates the transition of the peptide into fibrils on anionic membranes.

Ultrashort Peptide Hydrogels Biomaterials with Potent Antibacterial Activity

For the past few decades, ultrashort peptide hydrogels have been at the forefront of biomaterials due to their unique properties like biocompatibility, tunable mechanical properties, and potent antibacterial activity. These ultrashort peptides self-assemble into a hydrogel matrix with nanofibrous networks. In this minireview, we have explored the design and self-assembly of these ultrashort peptide hydrogels by focusing on their antibacterial properties. Cationic and hydrophobic residues are incorporated to engineer the peptides, facilitating interaction with bacterial membranes and leading to membrane disruption and cell death. The hydrogels exhibit broad-spectrum antibacterial activity against both Gram-positive and Gram-negative bacteria. Overall, this minireview highlights the potential of ultrashort peptide hydrogels as versatile and practical antibacterial biomaterials, providing a novel approach to combating bacterial infections and addressing the growing challenge of antibiotic resistance.

Self-assembling peptide with dual function of cell penetration and antibacterial as a nano weapon to combat intracellular bacteria

Intracellular bacterial infections and antimicrobial resistance are threatening global public health systems. Antimicrobial peptides are a potential solution to combat bacterial resistance, but the design of self-assembled nanopeptides with dual functions of cell penetration and antibacterial properties to combat intracellular bacteria remains a challenge. Here, we propose a strategy to develop self-assembled nanopeptides with dual functions through the chimerization of self-assembled core, hydrophobic motif, and cell-permeable unit. The optimal nanopeptides, F3FT and N3FT, exhibited potent antibacterial activity and excellent biocompatibility. Crucially, F3FT and N3FT are able to efficiently penetrate cells and eliminate intracellular bacteria and sniping inflammation. Moreover, F3FT and N3FT kill bacteria mainly by disrupting bacterial cell membranes and inducing excessive accumulation of reactive oxygen species. F3FT and N3FT have exhibited good safety and potent therapeutic potential in vivo. This scheme of constructing nanopeptides through multifunctional domains design provides a paradigm for dealing with escalating of intracellular bacteria and antimicrobial resistance.

Peptide-based nanomaterials and their diverse applications

The supramolecular self-assembly of peptides offers a promising avenue for both materials science and biological applications. Peptides have garnered significant attention in molecular self-assembly, forming diverse nanostructures with α-helix, β-sheet, and random coil conformations. These self-assembly processes are primarily driven by the amphiphilic nature of peptides and stabilized by non-covalent interactions, leading to complex nanoarchitectures responsive to environmental stimuli. While extensively studied in biomedical applications, including drug delivery and tissue engineering, their potential applications in the fields of piezoresponsive materials, conducting materials, catalysis and energy harvesting remain underexplored. This review comprehensively elucidates the diverse material characteristics and applications of self-assembled peptides. We discuss the multi-stimuli-responsiveness of peptide self-assemblies and their roles as energy harvesters, catalysts, liquid crystalline materials, glass materials and contributors to electrical conductivity. Additionally, we address the challenges and present future perspectives associated with peptide nanomaterials. This review aims to provide insights into the versatile applications of peptide self-assemblies while concisely summarizing their well-established biomedical roles that have previously been extensively reviewed by various research groups, including our group.

Dual Antimicrobial and Anticancer Activity of Membrane-Active Peptide BP52

The linear undecapeptide BP52 was previously reported to have antibacterial activity against phytopathogenic bacteria species. Due to the structural similarities to naturally occurring cationic helical antimicrobial peptides, it was speculated that this peptide could potentially target microbial pathogens and cancer cells found in mammals. Consequently, this study aims to further investigate the structural and biological properties of this peptide. Our findings indicate that BP52 exhibits strong antimicrobial and anticancer activity while displaying relatively low levels of hemolytic activity. Hence, this study suggests that BP52 could be a potential lead compound for drug discovery against infectious diseases and cancer. Besides, new insights into the relationships between the structure and the multifunctional properties of antimicrobial peptides were also explored.

Self-Assembled Food Peptides: Recent Advances and Perspectives in Food and Health Applications

Self-assembling peptides are rapidly gaining attention as novel biomaterials for food and biomedical applications. Peptides self-assemble when triggered by physical or chemical factors due to their versatile physicochemical characteristics. Peptide self-assembly, when combined with the health-promoting bioactivity of peptides, can also result in a plethora of biofunctionalities of the biomaterials. This perspective highlights current developments in the use of food-derived self-assembling peptides as biomaterials, bioactive nutraceuticals, and potential dual functioning bioactive biomaterials. Also discussed are the challenges and opportunities in the use of self-assembling bioactive peptides in designing biocompatible, biostable, and bioavailable multipurpose biomaterials.

Reducing Self-Assembly by Increasing Net Charge: Effect on Biological Activity of Mastoparan C

The ability of amphipathic peptides to arrange themselves in aqueous solutions, known as self-assembly, has been found to reduce the effectiveness of these peptides in interacting with cell membranes. Therefore, minimizing their tendency to self-assemble could be a potential strategy for enhancing the pharmacological properties of antimicrobial peptides (AMPs). To explore this idea, this study prepared a series of natural peptides mastoparan C (MPC) with increased net charge and hydrophilicity via alanine-to-lysine substitution and investigated the impact on the biological activity. The preliminary data suggested the influence of both the overall positive charge and the position of a lysine residue on the self-assembly of MPC and its derivatives. Besides, the analogue MPC-A5K,A8K displayed higher anticancer activity and comparable antimicrobial activity with significantly lower hemolysis than MPC. Hence, reducing self-assembly by expanding the cationic area could be a promising approach for developing potent and selective AMPs.

Advances in biosynthesis of peptide drugs: Technology and industrialization

Peptide drugs are developed from endogenous or synthetic peptides with specific biological activities. They have advantages of strong target specificity, high efficacy and low toxicity, thus showing great promise in the treatment of many diseases such as cancer, infections, and diabetes. Although an increasing number of peptide drugs have entered market in recent years, the preparation of peptide drug substances is yet a bottleneck problem for their industrial production. Comparing to the chemical synthesis method, peptide biosynthesis has advantages of simple synthesis, low cost, and low contamination. Therefore, the biosynthesis technology of peptide drugs has been widely used for manufacturing. Herein, we reviewed the development of peptide drugs and recent advances in peptide biosynthesis technology, in order to shed a light to the prospect of industrial production of peptide drugs based on biosynthesis technology.

Quantitative Imaging of the Action of vCPP2319, an Antimicrobial Peptide from a Viral Scaffold, against Staphylococcus aureus Biofilms of a Clinical Isolate

The formation of biofilms is a common virulence factor that makes bacterial infections difficult to treat and a major human health problem. Biofilms are bacterial communities embedded in a self-produced matrix of extracellular polymeric substances (EPS). In this work, we show that vCPP2319, a polycationic peptide derived from the capsid protein of Torque teno douroucouli virus, is active against preformed Staphylococcus aureus biofilms produced by both a reference strain and a clinical strain isolated from a diabetic foot infection, mainly by the killing of biofilm-embedded bacteria. The direct effect of vCPP2319 on bacterial cells was imaged using atomic force and confocal laser scanning microscopy, showing that the peptide induces morphological changes in bacterial cells and membrane disruption. Importantly, vCPP2319 exhibits low toxicity toward human cells and high stability in human serum. Since vCPP2319 has a limited effect on the biofilm EPS matrix itself, we explored a combined effect with α-amylase (EC 3.2.1.1), an EPS matrix-degrading enzyme. In fact, α-amylase decreases the density of S. aureus biofilms by 2.5-fold. Nonetheless, quantitative analysis of bioimaging data shows that vCPP2319 partially restores biofilm compactness after digestion of the polysaccharides, probably due to electrostatic cross-bridging of the matrix nucleic acids, which explains why α-amylase fails to improve the antibacterial action of the peptide.

Transient Coatings from Nanoparticles Achieving Broad-Spectrum and High Antimicrobial Performance

Cationic and hydrophilic coatings based on casting and drying water dispersions of two different nanoparticles (NPs) onto glass are here described and evaluated for antimicrobial activity. Discoid cationic bilayer fragments (BF) surrounded by carboxy-methylcellulose (CMC) and poly (diallyl dimethyl ammonium) chloride (PDDA) NPs and spherical gramicidin D (Gr) NPs dispersed in water solution were cast onto glass coverslips and dried, forming a coating quantitatively evaluated against Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans. From plating and colony forming units (CFU) counting, all strains interacting for 1 h with the coatings lost viability from 10⁵ to 10⁶, to zero CFU, at two sets of Gr and PDDA doses: 4.6 and 25 μg, respectively, or, 0.94 and 5 μg, respectively. Combinations produced broad spectrum, antimicrobial coatings; PDDA electrostatically attached to the microbes damaging cell walls, allowing Gr NPs interaction with the cell membrane. This concerted action promoted optimal activity at low Gr and PDDA doses. Further washing and drying of the deposited dried coatings showed that they were washed out so that antimicrobial activity was no longer present on the glass surface. Significant applications in biomedical materials can be foreseen for these transient coatings.

Self-Assembly Nanostructure of Myristoylated ω-Conotoxin MVIIA Increases the Duration of Efficacy and Reduces Side Effects

Chronic pain is one of the most prevalent health problems worldwide. An alternative to suppress or alleviate chronic pain is the use of peptide drugs that block N-type Ca2+ channels (Cav2.2), such as ω-conotoxin MVIIA. Nevertheless, the narrow therapeutic window, severe neurological side effects and low stability associated with peptide MVIIA have restricted its widespread use. Fortunately, self-assembly endows the peptide with high stability and multiple functions, which can effectively control its release to prolong its duration of action. Inspired by this, MVIIA was modified with appropriate fatty acid chains to render it amphiphilic and easier to self-assemble. In this paper, an N-terminal myristoylated MVIIA (Myr-MVIIA, medium carbon chain length) was designed and prepared to undergo self-assembly. The present results indicated that Myr-MVIIA can self-assemble into micelles. Self-assembled micelles formed by Myr-MVIIA at higher concentrations than MVIIA can prolong the duration of the analgesic effect and significantly reduce or even eliminate the side effects of tremor and coordinated motor dysfunction in mice.

Structure-activity relationships of antibacterial peptides

Antimicrobial peptides play a crucial role in innate immunity, whose components are mainly peptide-based molecules with antibacterial properties. Indeed, the exploration of the immune system over the past 40 years has revealed a number of natural peptides playing a pivotal role in the defence mechanisms of vertebrates and invertebrates, including amphibians, insects, and mammalians. This review provides a discussion regarding the antibacterial mechanisms of peptide-based agents and their structure-activity relationships (SARs) with the aim of describing a topic that is not yet fully explored. Some growing evidence suggests that innate immunity should be strongly considered for the development of novel antibiotic peptide-based libraries. Also, due to the constantly rising concern of antibiotic resistance, the development of new antibiotic drugs is becoming a priority of global importance. Hence, the study and the understanding of defence phenomena occurring in the immune system may inspire the development of novel antibiotic compound libraries and set the stage to overcome drug-resistant pathogens. Here, we provide an overview of the importance of peptide-based antibacterial sources, focusing on accurately selected molecular structures, their SARs including recently introduced modifications, their latest biotechnology applications, and their potential against multi-drug resistant pathogens. Last, we provide cues to describe how antibacterial peptides show a better scope of action selectivity than several anti-infective agents, which are characterized by non-selective activities and non-targeted actions toward pathogens.

Rational design of potent ultrashort antimicrobial peptides with programmable assembly into nanostructured hydrogels

Microbial resistance to common antibiotics is threatening to cause the next pandemic crisis. In this context, antimicrobial peptides (AMPs) are receiving increased attention as an alternative approach to the traditional small molecule antibiotics. Here, we report the bi-functional rational design of Fmoc-peptides as both antimicrobial and hydrogelator substances. The tetrapeptide Fmoc-WWRR-NH₂-termed Priscilicidin-was rationally designed for antimicrobial activity and molecular self-assembly into nanostructured hydrogels. Molecular dynamics simulations predicted Priscilicidin to assemble in water into small oligomers and nanofibrils, through a balance of aromatic stacking, amphiphilicity and electrostatic repulsion. Antimicrobial activity prediction databases supported a strong antimicrobial motif via sequence analogy. Experimentally, this ultrashort sequence showed a remarkable hydrogel forming capacity, combined to a potent antibacterial and antifungal activity, including against multidrug resistant strains. Using a set of biophysical and microbiology techniques, the peptide was shown to self-assemble into viscoelastic hydrogels, as a result of assembly into nanostructured hexagonal mesophases. To further test the molecular design approach, the Priscilicidin sequence was modified to include a proline turn-Fmoc-WPWRR-NH₂, termed P-Priscilicidin-expected to disrupt the supramolecular assembly into nanofibrils, while predicted to retain antimicrobial activity. Experiments showed P-Priscilicidin self-assembly to be effectively hindered by the presence of a proline turn, resulting in liquid samples of low viscosity. However, assembly into small oligomers and nanofibril precursors were evidenced. Our results augur well for fast, adaptable, and cost-efficient antimicrobial peptide design with programmable physicochemical properties.

Self-Assembly of Antimicrobial Peptide-Based Micelles Breaks the Limitation of Trypsin

Targeting the limitation of antimicrobial peptides (AMPs) application in vivo, self-assembled AMPs library with specific nanostructures is expected to gradually overtake monomer AMPs libraries in the future. Peptide polymers are fascinating self-assembling nanoscale structures that have great advantage in biomedical applications because of their satisfactory biocompatibility and versatile properties. Herein, we describe a strategy for inducing the self-assembly of T9W into nanostructured antimicrobial micelles with evidently improved pharmacological properties, that is, PEGylation at the C-terminal of T9W (CT9W₁₀₀₀), an antibacterial biomaterial that self-assembles in aqueous media without exogenous excipients, has been developed. Compared with parental molecular, the CT9W₁₀₀₀ is more effective against Pseudomonas aeruginosa, and its antibacterial spectrum had also been broadened. Additionally, CT9W₁₀₀₀ micelles had higher stability under salt ion, serum, and acid-base environments. Importantly, the self-assembled structure is highly resistant to trypsin degradation, probably allowing T9W to be applied in clinical settings in the future. Mechanistically, by acting on membranes and through supplementary bactericidal mechanisms, CT9W₁₀₀₀ micelles contribute to the antibacterial process. Collectively, CT9W₁₀₀₀ micelles exhibited good biocompatibility in vitro and in vivo, resulting in highly effective treatment in a mouse acute lung injury model induced by P. aeruginosa PAO1 without drug resistance. These advances may profoundly accelerate the clinical transformation of T9W and promote the development of a combination of peptide-based antibiotics and PEGylated nanotechnology.

Self-Assembly of Linear, Natural Antimicrobial Peptides: An Evolutionary Perspective

Antimicrobial peptides are an ancient and innate system of host defence against a wide range of microbial assailants. Mechanistically, unstructured peptides undergo a secondary structure transition into amphipathic α-helices, upon contact with membrane surfaces. This leads to peptide binding and removal of the membrane components in a detergent-like manner or via self-organisation into trans-membrane pores (either barrel-stave or toroidal pore) thereby destroying the microbe. Self-assembly of antimicrobial peptides into oligomers and ultimately amyloid has been mostly examined in parallel, however recent findings link diseases, such as Alzheimer's disease as an aberrant activity of a protective neuropeptide with antimicrobial activity. These self-assembled oligomers can also interact with membranes. Here, we review those antimicrobial peptides reported to self-assemble into amyloid, where supported by structural evidence. We consider their membrane activities as antimicrobial peptides and present evidence of consistent self-assembly patterns across major evolutionary groups. Trends are apparent across these groups, supporting the mounting data that self-assembly of antimicrobial peptides into amyloid should be considered as synergistic to the antimicrobial peptide response.

Infection-activated lipopeptide nanotherapeutics with adaptable geometrical morphology for in vivo bacterial ablation

The nonselective membrane disruption of antimicrobial peptides (AMPs) helps in combating the antibacterial resistance. But their overall positive charges lead to undesirable hemolysis and toxicity toward normal living cells, as well as the rapid clearance from blood circulation. In consequence, developing smart AMPs to optimize the antimicrobial outcomes is highly urgent. Relying on the local acidity of microbial infection sites, in this work, we designed an acidity-triggered charge reversal nanotherapeutics with adaptable geometrical morphology for bacterial targeting and optimized therapy. C₁₆-A₃K₄-CONH₂ was proposed and the ε-amino groups in lysine residues were acylated by dimethylmaleic amide (DMA), enabling the generated C₁₆-A₃K₄(DMA)-CONH₂ to self-assemble into negatively charged spherical nanostructure, which relieved the protein adsorption and prolonged blood circulation in vivo. After the access of C₁₆-A₃K₄(DMA)-CONH₂ into the microbial infection sites, acid-sensitive β-carboxylic amide would hydrolyze to regenerate the positive C₁₆-A₃K₄-CONH₂ to destabilize the negatively charged bacterial membrane. In the meanwhile, attractively, the self-assembled spherical nanoparticle transformed to rod-like nanostructure, which was in favor of the efficient binding with bacterial membranes due to the larger contact area. Our results showed that the acid-activated AMP nanotherapeutics exhibited strong and broad-spectrum antimicrobial activities against Yeast, Gram-positive Staphylococcus aureus, Gram-negative Escherichia coli, and methicillin-resistant Staphylococcus aureus (MRSA). Moreover, the biocompatible lipopeptide nanotherapeutics dramatically improved the dermapostasis caused by bacterial infection. The strategy of merging pathology-activated therapeutic function and morphological adaptation to augment therapeutic outcomes shows the great potential for bacterial inhibition. STATEMENT OF SIGNIFICANCE: The overall positive charges of antimicrobial peptides (AMPs) lead to undesirable hemolysis and nonselective toxicity, as well as the rapid clearance from blood circulation. Infection-activated lipopeptide nanotherapeutics with adaptable geometrical morphology were developed to address these issues. The self-assembled lipopeptide was pre-decorated to reverse the positive charge to reduce the hemolysis and nonselective cytotoxicity. After accessing the acidic infection sites, the nanotherapeutics recovered the positive charge to destabilize negatively charged bacterial membranes. Meanwhile, the morphology of self-assembled nanotherapeutics transformed from spherical nanoparticles to rod-like nanostructures in the lesion site, facilitating the improved association with bacterial membranes to boost the therapeutic efficiency. These results provide new design rationale for AMPs developed for bacterial inhibition.

Characterization and Differential Cytotoxicity of Gramicidin Nanoparticles Combined with Cationic Polymer or Lipid Bilayer

Gramicidin (Gr) nanoparticles (NPs) and poly (diallyl dimethyl ammonium) chloride (PDDA) water dispersions were characterized and evaluated against Gram-positive and Gram-negative bacteria and fungus. Dynamic light scattering for sizing, zeta potential analysis, polydispersity, and colloidal stability over time characterized Gr NPs/PDDA dispersions, and plating and colony-forming units counting determined their microbicidal activity. Cell viabilities of Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans in the presence of the combinations were reduced by 6, 7, and 7 logs, respectively, at 10 μM Gr/10 μg·mL⁻¹ PDDA, 0.5 μM Gr/0. 5μg·mL⁻¹ PDDA, and 0.5 μM Gr/0.5 μg·mL⁻¹ PDDA, respectively. In comparison to individual Gr doses, the combinations reduced doses by half (S. aureus) and a quarter (C. albicans); in comparison to individual PDDA doses, the combinations reduced doses by 6 times (P. aeruginosa) and 10 times (C. albicans). Gr in supported or free cationic lipid bilayers reduced Gr activity against S. aureus due to reduced Gr access to the pathogen. Facile Gr NPs/PDDA disassembly favored access of each agent to the pathogen: PDDA suctioned the pathogen cell wall facilitating Gr insertion in the pathogen cell membrane. Gr NPs/PDDA differential cytotoxicity suggested the possibility of novel systemic uses for the combination.

Synthetic Amphipathic β-Sheet Temporin-Derived Peptide with Dual Antibacterial and Anti-Inflammatory Activities

Temporin family is one of the largest among antimicrobial peptides (AMPs), which act mainly by penetrating and disrupting the bacterial membranes. To further understand the relationship between the physical-chemical properties and their antimicrobial activity and selectivity, an analogue of Temporin L, [Nle¹, dLeu⁹, dLys¹⁰]TL (Nle-Phe-Val-Pro-Trp-Phe-Lys-Phe-dLeu-dLys-Arg-Ile-Leu-CONH₂) has been developed in the present work. The design strategy consisted of the addition of a norleucine residue at the N-terminus of the lead peptide sequence, [dLeu⁹, dLys¹⁰]TL, previously developed by our group. This modification promoted an increase of peptide hydrophobicity and, interestingly, more efficient activity against both Gram-positive and Gram-negative strains, without affecting human keratinocytes and red blood cells survival compared to the lead peptide. Thus, this novel compound was subjected to biophysical studies, which showed that the peptide [Nle¹, dLeu⁹, dLys¹⁰]TL is unstructured in water, while it adopts β-type conformation in liposomes mimicking bacterial membranes, in contrast to its lead peptide forming α-helical aggregates. After its aggregation in the bacterial membrane, [Nle¹, dLeu⁹, dLys¹⁰]TL induced membrane destabilization and deformation. In addition, the increase of peptide hydrophobicity did not cause a loss of anti-inflammatory activity of the peptide [Nle¹, dLeu⁹, dLys¹⁰]TL in comparison with its lead peptide. In this study, our results demonstrated that positive net charge, optimum hydrophobic−hydrophilic balance, and chain length remain the most important parameters to be addressed while designing small cationic AMPs.

The current research status and strategies employed to modify food-derived bioactive peptides

The ability of bioactive peptides to exert biological functions has mainly contributed to their exploitation. The exploitation and utilization of these peptides have grown tremendously over the past two decades. Food-derived peptides from sources such as plant, animal, and marine proteins and their byproducts constitute a more significant portion of the naturally-occurring peptides that have been documented. Due to their high specificity and biocompatibility, these peptides serve as a suitable alternative to pharmacological drugs for treating non-communicable diseases (such as cardiovascular diseases, obesity, and cancer). They are helpful as food preservatives, ingredients in functional foods, and dietary supplements in the food sector. Despite their unique features, the application of these peptides in the clinical and food sector is to some extent hindered by their inherent drawbacks such as toxicity, bitterness, instability, and susceptibility to enzymatic degradation in the gastrointestinal tract. Several strategies have been employed to eliminate or reduce the disadvantages of peptides, thus enhancing the peptide bioactivity and broadening the opportunities for their applications. This review article focuses on the current research status of various bioactive peptides and the strategies that have been implemented to overcome their disadvantages. It will also highlight future perspectives regarding the possible improvements to be made for the development of bioactive peptides with practical uses and their commercialization.

Advances in hybrid peptide-based self-assembly systems and their applications

Self-assembly of peptides demonstrates a great potential for designing highly ordered, finely tailored supramolecular arrangements enriched with high specificity, improved efficacy and biological activity. Along with natural peptides, hybrid peptide systems composed of natural and chemically diverse unnatural amino acids have been used in various fields, including drug delivery, wound healing, potent inhibition of diseases, and prevention of biomaterial related diseases to name a few. In this review, we provide a brief outline of various methods that have been utilized for obtaining fascinating structures that create an avenue to reproduce a range of functions resulting from these folds. An overview of different self-assembled structures as well as their applications will also be provided. We believe that this review is very relevant to the current scenario and will cover conformations of hybrid peptides and resulting self-assemblies from the late 20^th century through 2022. This review aims to be a comprehensive and reliable account of the hybrid peptide-based self-assembly owing to its enormous influence in understanding and mimicking biological processes.

Influence of chain length on the anticancer activity of the antimicrobial peptide CAMEL with fatty acid modification

Antimicrobial peptides (AMPs) display promising potential in cancer therapy. Modification with fatty acids is a simple and effective approach to improve the activity of AMPs. In the present study, we investigated the effects of fatty acid chain lengths on the anticancer activity, self-assembly and mechanism of action of CAMEL (CM15, KWKLFKKIGAVLKVL-NH₂), an amphipathic AMP with 15 amino acids. Conjugation of fatty acids could obviously improve the in vitro anticancer activity of CAMEL. Among the tested peptides, C12-CAMEL showed the highest anticancer activity, while C16-CAMEL killed cancer cells with the slowest kinetics. This may be related to the self-assembly of C12-CAMEL and C16-CAMEL, which could form spherical nanoparticles and tightened nanofibers, respectively. In addition, necrosis and necroptosis rather than apoptosis were the major mechanisms underlying the anticancer activity of CAMEL, C12-CAMEL and C16-CAMEL, implying that modification with fatty acids did not obviously alter the mechanism of action of CAMEL. Notably, C12-CAMEL, with high and rapid cell-killing activity, exhibited significantly stronger in vivo anticancer activity than CAMEL and C16-CAMEL. Overall, the present work suggests that the choice of a suitable fatty acid for structural modification is necessary for improving the anticancer activity of AMPs.

Evolving and assembling to pierce through: Evolutionary and structural aspects of antimicrobial peptides

The burgeoning menace of antimicrobial resistance across the globe has necessitated investigations into other chemotherapeutic strategies to combat infections. Antimicrobial peptides, or host defense peptides, are a set of promising therapeutic candidates in this regard. Most of them cause membrane permeabilization and are a key component of the innate immune response to pathogenic invasion. It has also been reported that peptide self-assembly is a driving factor governing the microbicidal activity of these peptide candidates. While efforts have been made to develop novel synthetic peptides against various microbes, many clinical trials of such peptides have failed due to toxicity and hemolytic activity to the host. A function-guided rational peptide engineering, based on evolutionary principles, physicochemical properties and activity determinants of AMP activity, is expected to help in targeting specific microbes. Furthermore, it is important to develop a unified understanding of the evolution of AMPs in order to fully appreciate their importance in host defense. This review seeks to explore the evolution of AMPs and the physicochemical determinants of AMP activity. The specific interactions driving AMP self-assembly have also been reviewed, emphasizing implications of this self-assembly on microbicidal and immunomodulatory activity.

Designing Self-Assembling Chimeric Peptide Nanoparticles with High Stability for Combating Piglet Bacterial Infections

As a novel type of antibiotic alternative, peptide-based antibacterial drug shows potential application prospects attributable to their unique mechanism for lysing the membrane of pathogenic bacteria. However, peptide-based antibacterial drugs suffer from a series of problems, most notably their immature stability, which seriously hinders their application. In this study, self-assembling chimeric peptide nanoparticles (which offer excellent stability in the presence of proteases and salts) are constructed and applied to the treatment of bacterial infections. In vitro studies are used to demonstrate that peptide nanoparticles NPs1 and NPs2 offer broad-spectrum antibacterial activity and desirable biocompatibility, and they retain their antibacterial ability in physiological salt environments. Peptide nanoparticles NPs1 and NPs2 can resist degradation under high concentrations of proteases. In vivo studies illustrate that the toxicity caused by peptide nanoparticles NPs1 and NPs2 is negligible, and these nanoparticles can alleviate systemic bacterial infections in mice and piglets. The membrane permeation mechanism and interference with the cell cycle differ from that of antibiotics and mean that the nanoparticles are at a lower risk of inducing drug resistance. Collectively, these advances may accelerate the development of peptide-based antibacterial nanomaterials and can be applied to the construction of supramolecular nanomaterials.

Polyoxometalate-polypeptide nanoassemblies as peroxidase surrogates with antibiofilm properties

Developing artificial metalloenzymes that possess a superior performance to their natural counterparts is an attractive concept. Polyoxometalates (POMs) are a class of anionic molecular metal-oxides with excellent redox properties and bioactivity. We have recently introduced "POMlymers" - covalently conjugated POM-peptide hybrid materials - where the polypeptide chain is obtained through a ring-opening polymerisation (ROP) of α-amino acid N-carboxyanhydrides (NCA) on an inorganic POM scaffold. Attracted by the idea of preparing artificial metalloenzymes, here we report the supramolecular self-assembly of POMlymer hybrids into nanoparticles where an optimal environment for catalysis is created. Our results demonstrate that the self-assembly of covalent POMlymers, enhances the peroxidase-like activity of the parent POM anion whereas, in contrast, the catalytic activity for nanoparticles obtained by ionic self-assembly of the same peptide and POM components practically disappears. Furthermore, POMlymer nanoparticles also present antimicrobial and antibiofilm activity against the skin bacterium Staphylococcus epidermidis; whereas, ionic POM-peptide hybrids significantly increase biofilm production and endogenous production of reactive oxygen species. In summary, we present the self-assembly of POMlymer hybrids into nanoparticles and a combination of peroxidase activity and microbiology assays that show that the POM-peptide covalent bond is essential for the stability of the self-assembled nanoparticles and therefore for their catalytic and biological activity.

Study on the self-assembly of aromatic antimicrobial peptides based on different PAF26 peptide sequences

Antimicrobial peptide (AMP) self-assembly is an effective way to synthesis antimicrobial biomaterials. In previous studies, we found PAF26 AMP (Ac-RKKWFW-NH2) and its derivative K2–F2 peptide (Ac-KKRKKWFWFF-NH2) could both self-assemble into hydrogels, but they had distinct microscopic structures. Therefore, in this work five PAF26 peptide derivatives with different numbers of aromatic amino acids are designed to better understand the self-assembly mechanism of aromatic AMP. The transmission electron microscopy, infrared spectroscopy, circular dichroism, and fluorescence spectroscopy characterizations are carried out to study the microscope structure, secondary conformation, and molecular interactions. It is found that the five peptide derivatives have different microscopic structures, and the number of aromatic amino acids will affect the peptide hydrogen bonding and aromatic stacking interactions, causing significant differences in the secondary conformation and microscopic structure. This work will enhance the comprehension of aromatic AMP self-assembly.

Self-Assembly of Antimicrobial Peptoids Impacts Their Biological Effects on ESKAPE Bacterial Pathogens

Antimicrobial peptides (AMPs) are promising pharmaceutical candidates for the prevention and treatment of infections caused by multidrug-resistant ESKAPE pathogens, which are responsible for the majority of hospital-acquired infections. Clinical translation of AMPs has been limited, in part by apparent toxicity on systemic dosing and by instability arising from susceptibility to proteolysis. Peptoids (sequence-specific oligo-N-substituted glycines) resist proteolytic digestion and thus are of value as AMP mimics. Only a few natural AMPs such as LL-37 and polymyxin self-assemble in solution; whether antimicrobial peptoids mimic these properties has been unknown. Here, we examine the antibacterial efficacy and dynamic self-assembly in aqueous media of eight peptoid mimics of cationic AMPs designed to self-assemble and two nonassembling controls. These amphipathic peptoids self-assembled in different ways, as determined by small-angle X-ray scattering; some adopt helical bundles, while others form core-shell ellipsoidal or worm-like micelles. Interestingly, many of these peptoid assemblies show promising antibacterial, antibiofilm activity in vitro in media, under host-mimicking conditions and antiabscess activity in vivo. While self-assembly correlated overall with antibacterial efficacy, this correlation was imperfect. Certain self-assembled morphologies seem better-suited for antibacterial activity. In particular, a peptoid exhibiting a high fraction of long, worm-like micelles showed reduced antibacterial, antibiofilm, and antiabscess activity against ESKAPE pathogens compared with peptoids that form ellipsoidal or bundled assemblies. This is the first report of self-assembling peptoid antibacterials with activity against in vivo biofilm-like infections relevant to clinical medicine.

How do terminal modifications of short designed IIKK peptide amphiphiles affect their antifungal activity and biocompatibility?

HYPOTHESIS

The widespread and prolonged use of antifungal antibiotics has led to the rapid emergence of multidrug resistant Candida species that compromise current treatments. Natural and synthetic antimicrobial peptides (AMPs) offer potential alternatives but require further development to overcome some of their current drawbacks. AMPs kill pathogenic fungi by permeabilising their membranes but it remains unclear how AMPs can be designed to maximise their antifungal potency whilst minimising their toxicity to host cells.

EXPERIMENTS

We have designed a group of short (IIKK)₃ AMPs via selective terminal modifications ending up with different amphiphilicities. Their antifungal performance was assessed by minimum inhibition concentration (MICs) and dynamic killing to 4 Candida strains and Cryptococcus neoformans, and the minimum biofilm-eradicating concentrations to kill 95% of the C. albicans biofilms (BEC₉₅). Different antifungal actions were interpreted on the basis of structural disruptions of the AMPs to small unilamellar vesicles from fluorescence leakage, Zeta potential, small angle neutron scattering (SANS) and molecular dynamics simulations (MD).

FINDING

AMPs possess high antifungal activities against the Candida species and Cryptococcus neoformans; some of them displayed faster dynamic killing than antibiotics like amphotericin B. G(IIKK)₃I-NH₂ and (IIKK)₃II-NH₂ were particularly potent against not only planktonic microbes but also fungal biofilms with low cytotoxicity to host cells. It was found that their high selectivity and fast action were well correlated to their fast membrane lysis, evident from data measured from Zeta potential measurements, SANS and MD, and also consistent with the previously observed antibacterial and anticancer performance. These studies demonstrate the important role of colloid and interface science in further developing short, potent and biocompatible AMPs towards clinical treatments via structure design and optimization.

The Potential of Modified and Multimeric Antimicrobial Peptide Materials as Superbug Killers

Antimicrobial peptides (AMPs) are found in nearly all living organisms, show broad spectrum antibacterial activity, and can modulate the immune system. Furthermore, they have a very low level of resistance induction in bacteria, which makes them an ideal target for drug development and for targeting multi-drug resistant bacteria 'Superbugs'. Despite this promise, AMP therapeutic use is hampered as typically they are toxic to mammalian cells, less active under physiological conditions and are susceptible to proteolytic degradation. Research has focused on addressing these limitations by modifying natural AMP sequences by including e.g., d-amino acids and N-terminal and amino acid side chain modifications to alter structure, hydrophobicity, amphipathicity, and charge of the AMP to improve antimicrobial activity and specificity and at the same time reduce mammalian cell toxicity. Recently, multimerisation (dimers, oligomer conjugates, dendrimers, polymers and self-assembly) of natural and modified AMPs has further been used to address these limitations and has created compounds that have improved activity and biocompatibility compared to their linear counterparts. This review investigates how modifying and multimerising AMPs impacts their activity against bacteria in planktonic and biofilm states of growth.

Interactions of two enantiomers of a designer antimicrobial peptide with structural components of the bacterial cell envelope

Antimicrobial peptides (AMPs) have great potential in treating multi-drug resistant bacterial infections. The antimicrobial activity of d-enantiomers is significantly higher than l-enantiomers and sometimes selectively enhanced against Gram-positive bacteria. Unlike phospholipids in the bacterial plasma membrane, the role of other bacterial cell envelop components is often overlooked in the mode of action of AMPs. In this work, we explored the structural interactions between the main different structural components in Gram-negative/Gram-positive bacteria and the two enantiomers of a designer AMP, GL13K. We observed that both l-GL13K and d-GL13K formed self-assembled amyloid-like nanofibrils when the peptides interacted with lipopolysaccharide and lipoteichoic acid, components of the outer membrane of Gram-negative bacteria and cell wall of Gram-positive bacteria, respectively. Another cell wall component, peptidoglycan, showed strong interactions exclusively with d-GL13K and formed distinct laminar structures. This specific interaction between peptidoglycans and d-GL13K might contribute to the enhanced activity of d-GL13K against Gram-positive bacteria as they have a much thicker peptidoglycan layer than Gram-negative bacteria. A better understanding of the specific role of bacterial cell envelop components in the AMPs mechanism of action can guide the design of more effective Gram-selective AMPs.

Fabrication of Supramolecular Antibacterial Nanofibers with Membrane-Disruptive Mechanism

By studying the principles of self-assembly and combining the structural parameters required for the asymmetric distribution of antimicrobial peptides (AMPs), we newly designed and screened the high-activity and low-toxicity AMP F2I-LL. This peptide can form a supramolecular hydrogel with a nanofiber microstructure in a simulated physiological environment (phosphate buffered saline), which exhibits broad-spectrum antibacterial activity. Compared with monomeric peptides, the introduction of a self-assembly strategy not only improved the bactericidal titer but also enhanced the serum stability of AMPs. Mechanistic studies showed that the positive charge enriched on the surface of the nanofiber was conducive to its rapid binding to the negatively charged part of the outer membrane of bacteria and further entered the inner membrane, increasing its permeability and ultimately leading to cell membrane rupture and death. This work provides insights into the design of nanopeptides with broad-spectrum antibacterial activity and provides new results for the development of biomedicine.

Polymyxin B-Triggered Assembly of Peptide Hydrogels for Localized and Sustained Release of Combined Antimicrobial Therapy

Repurposing old antibiotics into more effective and safer formulations is an emergent approach to tackle the growing threat of antimicrobial resistance. Herein, a peptide hydrogel is reported for the localized and sustained release of polymyxin B (PMB), a decade-old antibiotic with increasing clinical utility for treating multidrug-resistant Gram-negative bacterial infections. The hydrogel is assembled by additing PMB solution into a rationally designed peptide amphiphile (PA) solution and its mechanical properties can be adjusted through the addition of counterions, envisioning its application in diverse infection scenarios. Sustained release of PMB from the hydrogel over a 5-day period and prolonged antimicrobial activities against Gram-negative bacteria are observed. The localized release of active PMB from the hydrogel is shown to be effective in vivo for treating Pseudomonas aeruginosa infection in the Galleria mellonella burn wound infection model, dramatically reducing the mortality from 93% to 13%. Complementary antimicrobial activity against Gram-positive Staphylococcus aureus and enhanced antimicrobial effect against the Gram-negative Acinetobacter baumannii are observed when an additional antibiotic fusidic acid is incorporated into the hydrogen network. These results demonstrate the potential of the PMB-triggered PA hydrogel as a versatile platform for the localized and sustained delivery of combined antimicrobial therapies.

Unravelling the antimicrobial activity of peptide hydrogel systems: current and future perspectives

The use of hydrogels has garnered significant interest as biomaterial and drug delivery platforms for anti-infective applications. For decades antimicrobial peptides have been heralded as a much needed new class of antimicrobial drugs. Self-assembling peptide hydrogels with inherent antimicrobial ability have recently come to the fore. However, their fundamental antimicrobial properties, selectivity and mechanism of action are relatively undefined. This review attempts to establish a link between antimicrobial efficacy; the self-assembly process; peptide-membrane interactions and mechanical properties by studying several reported peptide systems: β-hairpin/β-loop peptides; multidomain peptides; amphiphilic surfactant-like peptides and ultrashort/low molecular weight peptides. We also explore their role in the formation of amyloid plaques and the potential for an infection etiology in diseases such as Alzheimer's. We look briefly at innovative methods of gel characterization. These may provide useful tools for future studies within this increasingly important field.

Recent Progress in the Design and Medical Application of In Situ Self-Assembled Polypeptide Materials

Inspired by molecular self-assembly, which is ubiquitous in natural environments and biological systems, self-assembled peptides have become a research hotspot in the biomedical field due to their inherent biocompatibility and biodegradability, properties that are afforded by the amide linkages forming the peptide backbone. This review summarizes the biological advantages, principles, and design strategies of self-assembled polypeptide systems. We then focus on the latest advances in in situ self-assembly of polypeptides in medical applications, such as oncotherapy, materials science, regenerative medicine, and drug delivery, and then briefly discuss their potential challenges in clinical treatment.

The amphibian antimicrobial peptide uperin 3.5 is a cross-α/cross-β chameleon functional amyloid

Antimicrobial activity is being increasingly linked to amyloid fibril formation, suggesting physiological roles for some human amyloids, which have historically been viewed as strictly pathological agents. This work reports on formation of functional cross-α amyloid fibrils of the amphibian antimicrobial peptide uperin 3.5 at atomic resolution, an architecture initially discovered in the bacterial PSMα3 cytotoxin. The fibrils of uperin 3.5 and PSMα3 comprised antiparallel and parallel helical sheets, respectively, recapitulating properties of β-sheets. Uperin 3.5 demonstrated chameleon properties of a secondary structure switch, forming mostly cross-β fibrils in the absence of lipids. Uperin 3.5 helical fibril formation was largely induced by, and formed on, bacterial cells or membrane mimetics, and led to membrane damage and cell death. These findings suggest a regulation mechanism, which includes storage of inactive peptides as well as environmentally induced activation of uperin 3.5, via chameleon cross-α/β amyloid fibrils.

Ultrashort Peptide Hydrogels Display Antimicrobial Activity and Enhance Angiogenic Growth Factor Release by Dental Pulp Stem/Stromal Cells

Recent studies on peptide hydrogels have shown that ultrashort peptides (<8 amino acids) can self-assemble into hydrogels. Ultrashort peptides can be designed to incorporate antimicrobial motifs, such as positively charged lysine residues, so that the peptides have inherent antimicrobial characteristics. Antimicrobial hydrogels represent a step change in tissue engineering and merit further investigation, particularly in applications where microbial infection could compromise healing. Herein, we studied the biocompatibility of dental pulp stem/stromal cells (DPSCs) with an ultrashort peptide hydrogel, (naphthalene-2-ly)-acetyl-diphenylalanine-dilysine-OH (NapFFεKεK-OH), where the epsilon (ε) amino group forms part of the peptide bond rather than the standard amino grouping. We tested the antimicrobial properties of NapFFεKεK-OH in both solution and hydrogel form against Staphylococcus aureus, Enterococcus faecalis and Fusobacterium nucleatum and investigated the DPSC secretome in hydrogel culture. Our results showed NapFFεKεK-OH hydrogels were biocompatible with DPSCs. Peptides in solution form were efficacious against biofilms of S. aureus and E. faecalis, whereas hydrogels demonstrated antimicrobial activity against E. faecalis and F. nucleatum. Using an angiogenic array we showed that DPSCs encapsulated within NapFFεKεK-OH hydrogels produced an angiogenic secretome. These results suggest that NapFFεKεK-OH hydrogels have potential to serve as novel hydrogels in tissue engineering for cell-based pulp regeneration.

Advances of peptides for antibacterial applications

In the past few decades, peptide antibacterial products with unique antibacterial mechanisms have attracted widespread interest. They can effectively reduce the probability of drug resistance of bacteria and are biocompatible, so they possess tremendous development prospects. This review provides recent research and analysis on the basic types of antimicrobial peptides (including poly (amino acid)s, short AMPs, and lipopeptides) and factors to optimize antimicrobial effects. It also summarizes the two most important modes of action of antimicrobial peptides and the latest developments in the application of AMPs, including antimicrobial agent, wound healing, preservative, antibacterial coating and others. Finally, we discuss the remaining challenges to improve the antibacterial peptides and propose prospects in the field.

Cell-Penetrating Peptides Derived from Animal Venoms and Toxins

Cell-penetrating peptides (CPPs) comprise a class of short polypeptides that possess the ability to selectively interact with the cytoplasmic membrane of certain cell types, translocate across plasma membranes and accumulate in the cell cytoplasm, organelles (e.g., the nucleus and mitochondria) and other subcellular compartments. CPPs are either of natural origin or de novo designed and synthesized from segments and patches of larger proteins or designed by algorithms. With such intrinsic properties, along with membrane permeation, translocation and cellular uptake properties, CPPs can intracellularly convey diverse substances and nanomaterials, such as hydrophilic organic compounds and drugs, macromolecules (nucleic acids and proteins), nanoparticles (nanocrystals and polyplexes), metals and radionuclides, which can be covalently attached via CPP N- and C-terminals or through preparation of CPP complexes. A cumulative number of studies on animal toxins, primarily isolated from the venom of arthropods and snakes, have revealed the cell-penetrating activities of venom peptides and toxins, which can be harnessed for application in biomedicine and pharmaceutical biotechnology. In this review, I aimed to collate examples of peptides from animal venoms and toxic secretions that possess the ability to penetrate diverse types of cells. These venom CPPs have been chemically or structurally modified to enhance cell selectivity, bioavailability and a range of target applications. Herein, examples are listed and discussed, including cysteine-stabilized and linear, α-helical peptides, with cationic and amphipathic character, from the venom of insects (e.g., melittin, anoplin, mastoparans), arachnids (latarcin, lycosin, chlorotoxin, maurocalcine/imperatoxin homologs and wasabi receptor toxin), fish (pardaxins), amphibian (bombesin) and snakes (crotamine and cathelicidins).

Molecular engineering of antimicrobial peptides: microbial targets, peptide motifs and translation opportunities

The global public health threat of antimicrobial resistance has led the scientific community to highly engage into research on alternative strategies to the traditional small molecule therapeutics. Here, we review one of the most popular alternatives amongst basic and applied research scientists, synthetic antimicrobial peptides. The ease of peptide chemical synthesis combined with emerging engineering principles and potent broad-spectrum activity, including against multidrug-resistant strains, has motivated intense scientific focus on these compounds for the past decade. This global effort has resulted in significant advances in our understanding of peptide antimicrobial activity at the molecular scale. Recent evidence of molecular targets other than the microbial lipid membrane, and efforts towards consensus antimicrobial peptide motifs, have supported the rise of molecular engineering approaches and design tools, including machine learning. Beyond molecular concepts, supramolecular chemistry has been lately added to the debate; and helped unravel the impact of peptide self-assembly on activity, including on biofilms and secondary targets, while providing new directions in pharmaceutical formulation through taking advantage of peptide self-assembled nanostructures. We argue that these basic research advances constitute a solid basis for promising industry translation of rationally designed synthetic peptide antimicrobials, not only as novel drugs against multidrug-resistant strains but also as components of emerging antimicrobial biomaterials. This perspective is supported by recent developments of innovative peptide-based and peptide-carrier nanobiomaterials that we also review.

Biomembrane induced in situ self-assembly of peptide with enhanced antimicrobial activity

Antimicrobial peptides (AMPs) as biocides are of great interest because they have the ability to combat antibiotic resistance. Normally, natural AMPs need to be rationally designed or modified for practical use as an antibiotic. Here, a novel AMP, termed FF8, which is a cationic octapeptide composed of arginine, lysine, and phenylalanine, was designed. The FF8 was found to self-assemble into nanofibers when induced by a negatively charged lipid membrane or pH is above 9.4. The fibers on the membrane broke the lipid membrane, forming pores and significantly reducing its fluidity. FF8 also exhibited enhanced antibacterial activity by significantly increasing the permeability of the inner and outer membranes of Escherichia coli (E. coli) and maintaining the pores of the inner membrane of cells, which caused continuous membrane leakage. Because of its high antibacterial activity, cytocompatibility, and cost-effectiveness, FF8 is a promising antibacterial material.