Kelvin probe study of band bending at organic semiconductor/metal interfaces: examination of Fermi level alignment

Recent Progress on Layered Sn and Pb-Based Mono Chalcogenides: Synthesis, Structure, Optical, and Thermoelectric Properties and Related Applications

The research on two-dimensional materials has gained significant traction due to their potential for thermoelectric, optical, and other properties. The development of two-dimensional (2D) nanostructured-based TE generators and photodetectors has shown promising results. Over the years, researchers have played a crucial role in advancing this field, enhancing the properties of 2D materials through techniques such as doping, alloying, and various growth methods. Among these materials, black phosphorus, transition metal dichalcogenides, graphene, and IVA-VIA compounds stand out for their remarkable electronic, mechanical, and optical properties. This study presents a comprehensive review of the progress in the field, focusing on IVA-VIA compounds and their applications in TE and photodetector technologies. We summarize recent advancements in enhancing these materials' TE and optical properties and provide an overview of various synthesis techniques for their fabrication. Additionally, we highlight their potential applications as photodetectors in the infrared spectrum. This comprehensive review aims to equip researchers with a deep understanding of the TE and optical properties of 2DMs and their potential applications and to inspire further advancements in this field of research.

Investigation of semiconductor properties of Co/Si(111)-7 × 7 by AFM/KPFS

Studies of the physics underlying carrier transport characteristics and band bending of semiconductors are critical for developing new types of devices. In this work, we investigated the physical properties of Co ring-like cluster (RC) reconstruction with a low Co coverage on a Si(111)-7 × 7 surface at atomic resolution by atomic force microscopy/Kelvin probe force microscopy at 78 K. We compared the applied bias dependence of frequency shift between two types of structure: Si(111)-7 × 7 and Co-RC reconstructions. As a result, the accumulation, depletion, and reversion layers were identified in the Co-RC reconstruction by bias spectroscopy. For the first time, we found that Co-RC reconstruction on the Si(111)-7 × 7 surface shows semiconductor properties by Kelvin probe force spectroscopy. The findings of this study are useful for developing new materials for semiconductor devices.

Doping Approaches for Organic Semiconductors

Electronic doping in organic materials has remained an elusive concept for several decades. It drew considerable attention in the early days in the quest for organic materials with high electrical conductivity, paving the way for the pioneering work on pristine organic semiconductors (OSCs) and their eventual use in a plethora of applications. Despite this early trend, however, recent strides in the field of organic electronics have been made hand in hand with the development and use of dopants to the point that are now ubiquitous. Here, we give an overview of all important advances in the area of doping of organic semiconductors and their applications. We first review the relevant literature with particular focus on the physical processes involved, discussing established mechanisms but also newly proposed theories. We then continue with a comprehensive summary of the most widely studied dopants to date, placing particular emphasis on the chemical strategies toward the synthesis of molecules with improved functionality. The processing routes toward doped organic films and the important doping-processing-nanostructure relationships, are also discussed. We conclude the review by highlighting how doping can enhance the operating characteristics of various organic devices.

Open-loop amplitude-modulation Kelvin probe force microscopy operated in single-pass PeakForce tapping mode

The open-loop (OL) variant of Kelvin probe force microscopy (KPFM) provides access to the voltage response of the electrostatic interaction between a conductive atomic force microscopy (AFM) probe and the investigated sample. The measured response can be analyzed a posteriori, modeled, and interpreted to include various contributions from the probe geometry and imaged features of the sample. In contrast to this, the currently implemented closed-loop (CL) variants of KPFM, either amplitude-modulation (AM) or frequency-modulation (FM), solely report on their final product in terms of the tip-sample contact potential difference. In ambient atmosphere, both CL AM-KPFM and CL FM-KPFM work at their best during the lift part of a two-pass scanning mode to avoid the direct contact with the surface of the sample. In this work, a new OL AM-KPFM mode was implemented in the single-pass scan of the PeakForce Tapping (PFT) mode. The topographical and electrical components were combined in a single pass by applying the electrical modulation only in between the PFT tip-sample contacts, when the AFM probe separates from the sample. In this way, any contact and tunneling discharges are avoided and, yet, the location of the measured electrical tip-sample interaction is directly affixed to the topography rendered by the mechanical PFT modulation at each tap. Furthermore, because the detailed response of the cantilever to the bias stimulation was recorded, it was possible to analyze and separate an average contribution of the cantilever to the determined local contact potential difference between the AFM probe and the imaged sample. The removal of this unwanted contribution greatly improved the accuracy of the AM-KPFM measurements to the level of the FM-KPFM counterpart.

Electronic structures and optical characteristics of fluorescent pyrazinoquinoxaline assemblies and Au interfaces

Understanding the excitonic processes at the interfaces of fluorescent π-conjugated molecules and metal electrodes is important for both fundamental studies and emerging applications. Adsorption configurations of molecules on metal surfaces significantly affect the physical characteristics of junctions as well as molecules. Here, the electronic structures and optical properties of molecular assemblies/Au interfaces were investigated using scanning probe and photoluminescence microscopy techniques. Scanning tunneling microscopy images and tunneling conductance spectra suggested that the self-assembled molecules were physisorbed on the Au surface. Visible-range photoluminescence studies showed that Au thin films modified the emission spectra and reduced the lifetime of excitons. Surface potential maps, obtained by Kelvin probe force microscopy, could visualize electron transfer from the molecules to Au under illumination, which could explain the decreased lifetime of excitons at the molecule/Au interface.

Mechanism and Timescales of Reversible p-Doping of Methylammonium Lead Triiodide by Oxygen

Understanding and controlling the energy level alignment at interfaces with metal halide perovskites (MHPs) is essential for realizing the full potential of these materials for use in optoelectronic devices. To date, however, the basic electronic properties of MHPs are still under debate. Particularly, reported Fermi level positions in the energy gap vary from indicating strong n- to strong p-type character for nominally identical materials, raising serious questions about intrinsic and extrinsic defects as dopants. ​In this work, photoemission experiments demonstrate that thin films of the prototypical methylammonium lead triiodide (MAPbI3 ) behave like an intrinsic semiconductor in the absence of oxygen. Oxygen is then shown to be able to reversibly diffuse into and out of the MAPbI3 bulk, requiring rather long saturation timescales of ≈1 h (in: ambient air) and over 10 h (out: ultrahigh vacuum), for few 100 nm thick films. Oxygen in the bulk leads to pronounced p-doping, positioning the Fermi level universally ≈0.55 eV above the valence band maximum. The key doping mechanism is suggested to be molecular oxygen substitution of iodine vacancies, supported by density functional theory calculations. This insight rationalizes previous and future electronic property studies of MHPs and calls for meticulous oxygen exposure protocols.

Balanced Ambipolar Charge Transport in Phenacene/Perylene Heterojunction-Based Organic Field-Effect Transistors

Electronic devices relying on the combination of different conjugated organic materials are considerably appealing for their potential use in many applications such as photovoltaics, light emission, and digital/analog circuitry. In this study, the electrical response of field-effect transistors achieved through the evaporation of picene and PDIF-CN₂ molecules, two well-known organic semiconductors with remarkable charge transport properties, was investigated. With the main goal to get a balanced ambipolar response, various device configurations bearing double-layer, triple-layer, and codeposited active channels were analyzed. The most suitable choices for the layer deposition processes, the related characteristic parameters, and the electrode position were identified to this purpose. In this way, ambipolar organic field-effect transistors exhibiting balanced mobility values exceeding 0.1 cm² V^-1 s^-1 for both electrons and holes were obtained. These experimental results highlight also how the combination between picene and PDIF-CN₂ layers allows tuning the threshold voltages of the p-type response. Scanning Kelvin probe microscopy (SKPM) images acquired on picene/PDIF-CN₂ heterojunctions suggest the presence of an interface dipole between the two organic layers. This feature is related to the partial accumulation of space charge at the interface being enhanced when the electrons are depleted in the underlayer.

Electronic Tuning of Monolayer Graphene with Polymeric "Zwitterists"

Work function engineering of two-dimensional (2D) materials by application of polymer coatings represents a research thrust that promises to enhance the performance of electronic devices. While polymer zwitterions have been demonstrated to significantly modify the work function of both metal electrodes and 2D materials due to their dipole-rich structure, the impact of zwitterion chemical structure on work function modulation is not well understood. To address this knowledge gap, we synthesized a series of sulfobetaine-based zwitterionic random copolymers with variable substituents and used them in lithographic patterning for the preparation of negative-tone resists (i.e., "zwitterists") on monolayer graphene. Ultraviolet photoelectron spectroscopy indicated a significant work function reduction, as high as 1.5 eV, induced by all polymer zwitterions when applied as ultrathin films (<10 nm) on monolayer graphene. Of the polymers studied, the piperidinyl-substituted version, produced the largest dipole normal to the graphene sheet, thereby inducing the maximum work function reduction. Density functional theory calculations probed the influence of zwitterion composition on dipole orientation, while lithographic patterning allowed for evaluation of surface potential contrast via Kelvin probe force microscopy. Overall, this polymer "zwitterist" design holds promise for fine-tuning 2D materials electronics with spatial control based on the chemistry of the polymer coating and the dimensions of the lithographic patterning.

Characterization and Electronic Properties of Heptazine Layers: Towards Promising Interfacial Materials for Organic Optoelectronics

For the first time, an original compound belonging to the heptazine family has been deposited in the form of thin layers, both by thermal evaporation under vacuum and spin-coating techniques. In both cases, smooth and homogeneous layers have been obtained, and their properties evaluated for eventual applications in the field of organic electronics. The layers have been fully characterized by several concordant techniques, namely UV-visible spectroscopy, steady-state and transient fluorescence in the solid-state, as well as topographic and conductive atomic force microscopy (AFM) used in Kelvin probe force mode (KPFM). Consequently, the afferent energy levels, including Fermi level, have been determined, and show that these new heptazines are promising materials for tailoring the electronic properties of interfaces associated with printed electronic devices. A test experiment showing an improved electron transfer rate from a tris-(8-hydroxyquinoline) aluminum (Alq3) photo-active layer in presence of a heptazine interlayer is finally presented.

Peak Force Infrared-Kelvin Probe Force Microscopy

Correlative scanning probe microscopy of chemical identity, surface potential, and mechanical properties provide insight into the structure-function relationships of nanomaterials. However, simultaneous measurement with comparable and high resolution is a challenge. We seamlessly integrated nanoscale photothermal infrared imaging with Coulomb force detection to form peak force infrared-Kelvin probe force microscopy (PFIR-KPFM), which enables simultaneous nanomapping of infrared absorption, surface potential, and mechanical properties with approximately 10 nm spatial resolution in a single-pass scan. MAPbBr₃ perovskite crystals of different degradation pathways were studied in situ. Nanoscale charge accumulations were observed in MAPbBr₃ near the boundary to PbBr₂ . PFIR-KPFM also revealed correlations between residual charges and secondary conformation in amyloid fibrils. PFIR-KPFM is applicable to other heterogeneous materials at the nanoscale for correlative multimodal characterizations.

High-speed digitization of the amplitude and frequency in open-loop sideband frequency-modulation Kelvin probe force microscopy

A more inclusive and detailed measurement of various physical interactions is enabled by the advance of high-speed data digitization. For surface potential characterization, this was demonstrated recently in terms of open-loop amplitude modulation Kelvin probe force microscopy (OL AM-KPFM). Its counterpart, namely open-loop frequency modulation Kelvin probe force microscopy (OL FM-KPFM), is examined here across different materials and under various bias voltages in the form of OL sideband FM-KPFM. In this implementation the changes in the amplitude and resonance frequency of the cantilever were continuously tracked as a conductive AFM probe was modulated by a 2 kHz AC bias voltage around the first eigenmode frequency of the cantilever. The contact potential difference (CPD) between the AFM probe and sample was determined from the time series analysis of the high-speed 4 MHz digitized amplitude and frequency signals of the OL sideband FM-KPFM mode. This interpretation is demonstrated to be superior to the analysis of the parabolic bias dependent response, which is more commonly used to extract the CPD in OL KPFM modes. The measured OL sideband FM-KPFM amplitude and frequency responses are directly related to the electrostatic force and force-gradient between the AFM probe and sample, respectively. As a result, clear distinction was observed for the determined CPD in each of these cases across materials of different surface potentials, with far superior spatial resolution when the force-gradient detection was used. In addition, the CPD values obtained from OL sideband FM-KPFM amplitude and frequency measurements perfectly matched those determined from their closed-loop AM-KPFM and FM-KPFM counterparts, respectively.

Photoconversion Mechanism at the pn-Homojunction Interface in Single Organic Semiconductor

Clarifying critical differences in free charge generation and recombination processes between inorganic and organic semiconductors is important for developing efficient organic photoconversion devices such as solar cells (SCs) and photodetector. In this study, we analyzed the dependence of doping concentration on the photoconversion process at the organic pn-homojunction interface in a single organic semiconductor using the temperature dependence of J–V characteristics and energy structure measurements. Even though the organic pn-homojunction SC devices were fabricated using a single host material and the doping technique resembling an inorganic pn-homojunction, the charge generation and recombination mechanisms are similar to that of conventional donor/acceptor (D/A) type organic SCs; that is, the charge separation happens from localized exciton and charge transfer (CT) state being separated by the energy offset between adjacent molecules, and the recombination happens from localized charge carrier at two adjacent molecules. The determining factor for photoconversion processes is the localized nature of charges in organic semiconductors. The results demonstrated that controlling the delocalization of the charges is important to realize efficient organic photoconversion devices.

Towards nanoscale electrical measurements in liquid by advanced KPFM techniques: a review

Fundamental mechanisms of energy storage, corrosion, sensing, and multiple biological functionalities are directly coupled to electrical processes and ionic dynamics at solid-liquid interfaces. In many cases, these processes are spatially inhomogeneous taking place at grain boundaries, step edges, point defects, ion channels, etc and possess complex time and voltage dependent dynamics. This necessitates time-resolved and real-space probing of these phenomena. In this review, we discuss the applications of force-sensitive voltage modulated scanning probe microscopy (SPM) for probing electrical phenomena at solid-liquid interfaces. We first describe the working principles behind electrostatic and Kelvin probe force microscopies (EFM & KPFM) at the gas-solid interface, review the state of the art in advanced KPFM methods and developments to (i) overcome limitations of classical KPFM, (ii) expand the information accessible from KPFM, and (iii) extend KPFM operation to liquid environments. We briefly discuss the theoretical framework of electrical double layer (EDL) forces and dynamics, the implications and breakdown of classical EDL models for highly charged interfaces or under high ion concentrations, and describe recent modifications of the classical EDL theory relevant for understanding nanoscale electrical measurements at the solid-liquid interface. We further review the latest achievements in mapping surface charge, dielectric constants, and electrodynamic and electrochemical processes in liquids. Finally, we outline the key challenges and opportunities that exist in the field of nanoscale electrical measurements in liquid as well as providing a roadmap for the future development of liquid KPFM.

Potential Dip in Organic Photovoltaics Probed by Cross-sectional Kelvin Probe Force Microscopy

Cross-sectional potential distribution of high open-circuit voltage bulk heterojunction photovoltaic device was measured using Kelvin probe force microscopy. Potential drop confined at cathode interface implies that photo-active layer is an effective p-type semiconductor. Potential values in field-free region show wide variation according to log-normal distribution. This potential dip prone to have holes captured during the diffusive motion, which can increase bimolecular recombination, while potential gradient in depletion region makes this potential dip smaller and the captured holes easily escape from dip region by Schottky barrier lowering.

Measuring the lateral charge-carrier mobility in metal-insulator-semiconductor capacitors via Kelvin-probe

We report a Kelvin-probe method to investigate the lateral charge-transport properties of semiconductors, most notably the charge-carrier mobility. The method is based on successive charging and discharging of a pre-biased metal-insulator-semiconductor stack by an alternating voltage applied to one edge of a laterally confined semiconductor layer. The charge carriers spreading along the insulator-semiconductor interface are directly measured by a Kelvin-probe, following the time evolution of the surface potential. A model is presented, describing the device response for arbitrary applied biases allowing the extraction of the lateral charge-carrier mobility from experimentally measured surface potentials. The method is tested using the organic semiconductor poly(3-hexylthiophene), and the extracted mobilities are validated through current voltage measurements on respective field-effect transistors. Our widely applicable approach enables robust measurements of the lateral charge-carrier mobility in semiconductors with weak impact from the utilized contact materials.

CH3NH3PbI3-xClx under Different Fabrication Strategies: Electronic Structures and Energy-Level Alignment with an Organic Hole Transport Material

We report a photoelectron spectroscopy study on the electronic structure of CH₃NH₃PbI_3-xCl_x thin films fabricated by physical evaporation from CH₃NH₃I and PbCl₂ precursors, including (1) simultaneously evaporation and (2) sequential evaporation. The results are compared with CH₃NH₃PbI_3-xCl_x made using conventional solution chemistry (i.e., spin-coating). Depending on the fabrication method, CH₃NH₃PbI_3-xCl_x films show different chemical constituents in the near-surface region, leading to disparities in their energetic levels. The chemical identities of the surface species are revealed by an in situ study on the sequentially evaporated film. Moreover, air-exposure treatment also greatly alters the energetic levels of the film. Using hole transport layer of N,N'-di(1-naphthyl)-N,N'-diphenylbenzidine (NPB) as a model system, we find that the energy-level alignment with the spin-coated film after air exposure is most suitable for efficient hole transport.

Measuring the Thickness and Potential Profiles of the Space-Charge Layer at Organic/Organic Interfaces under Illumination and in the Dark by Scanning Kelvin Probe Microscopy

Scanning Kelvin probe microscopy was used to measure band-bending at the model donor/acceptor heterojunction poly(3-hexylthiophene) (P3HT)/fullerene (C60). Specifically, we measured the variation in the surface potential of C60 films with increasing thicknesses grown on P3HT to produce a surface potential profile normal to the substrate both in the dark and under illumination. The results confirm a space-charge carrier region with a thickness of 10 nm, consistent with previous observations. We discuss the possibility that the domain size in bulk heterojunction organic solar cells, which is comparable to the space-charge layer thickness, is actually partly responsible for less than expected electron/hole recombination rates.

Organic heterojunctions: Contact-induced molecular reorientation, interface states, and charge re-distribution

We reveal the rather complex interplay of contact-induced re-orientation and interfacial electronic structure - in the presence of Fermi-level pinning - at prototypical molecular heterojunctions comprising copper phthalocyanine (H16CuPc) and its perfluorinated analogue (F16CuPc), by employing ultraviolet photoelectron and X-ray absorption spectroscopy. For both layer sequences, we find that Fermi-level (EF) pinning of the first layer on the conductive polymer substrate modifies the work function encountered by the second layer such that it also becomes EF-pinned, however, at the interface towards the first molecular layer. This results in a charge transfer accompanied by a sheet charge density at the organic/organic interface. While molecules in the bulk of the films exhibit upright orientation, contact formation at the heterojunction results in an interfacial bilayer with lying and co-facial orientation. This interfacial layer is not EF-pinned, but provides for an additional density of states at the interface that is not present in the bulk. With reliable knowledge of the organic heterojunction's electronic structure we can explain the poor performance of these in photovoltaic cells as well as their valuable function as charge generation layer in electronic devices.

Charging C60 islands with the AFM tip

We show that electrons can be transferred on demand from an AFM tip into single bulk-like C60 islands, which are supported on the insulating NaCl(001) surface. We exemplify this by controlled charge-manipulation experiments conducted in ultrahigh vacuum by noncontact AFM (nc-AFM), electrostatic force microscopy (EFM) and Kelvin probe force microscopy (KPFM). KPFM shows a homogeneous contrast at the islands, which is a signature for an equal distribution of the electrons in the T1u band. The charge dissipates during half a day due to an interaction of the charged C60 islands with defects in the near surface region of NaCl. Our results open the perspective in photo-voltaics to study charge attachment, stability and charge exchange with the environment of any C60 bulk-like system.

Control of Photoluminescence of Carbon Nanodots via Surface Functionalization using Para-substituted Anilines

Carbon nanodots (C-dots) are a kind of fluorescent carbon nanomaterials, composed of polyaromatic carbon domains surrounded by amorphous carbon frames, and have attracted a great deal of attention because of their interesting properties. There are still, however, challenges ahead such as blue-biased photoluminescence, spectral broadness, undefined energy gaps and etc. In this report, we chemically modify the surface of C-dots with a series of para-substituted anilines to control their photoluminescence. Our surface functionalization endows our C-dots with new energy levels, exhibiting long-wavelength (up to 650 nm) photoluminescence of very narrow spectral widths. The roles of para-substituted anilines and their substituents in developing such energy levels are thoroughly studied by using transient absorption spectroscopy. We finally demonstrate light-emitting devices exploiting our C-dots as a phosphor, converting UV light to a variety of colors with internal quantum yields of ca. 20%.

Quantitative operando visualization of the energy band depth profile in solar cells

The energy band alignment in solar cell devices is critically important because it largely governs elementary photovoltaic processes, such as the generation, separation, transport, recombination and collection of charge carriers. Despite the expenditure of considerable effort, the measurement of energy band depth profiles across multiple layers has been extremely challenging, especially for operando devices. Here we present direct visualization of the surface potential depth profile over the cross-sections of operando organic photovoltaic devices using scanning Kelvin probe microscopy. The convolution effect due to finite tip size and cantilever beam crosstalk has previously prohibited quantitative interpretation of scanning Kelvin probe microscopy-measured surface potential depth profiles. We develop a bias voltage-compensation method to address this critical problem and obtain quantitatively accurate measurements of the open-circuit voltage, built-in potential and electrode potential difference.

The energy band alignment of solar cell materials is highly relevant to the device performance, but its measurement is challenging. Here, the authors report direct visualization of energy band alignment in operating organic photovoltaic devices using scanning Kelvin probe microscopy imaging.

Optical, Electrochemical and Thermoanalytical Investigations on Newly-Synthesized Perylene-3,4,9,10-Dianhydride Fluorescent Dyes

A series of dyes using tetrachloroperylene dianhydride as fluorescent chromophore was synthesized by the substitution of suitable aliphatic and alicyclic alcohols in alkaline medium, and evaluation of dyes was done for their optical, electrochemical and thermal properties. These dyes exhibited absorption maxima λmax in the range of 440-460 nm in aqueous medium due to the presence of highly-conjugated framework. Fluorescence spectra of these dyes in water showed sharp emission peaks with small bandwidths and large fluorescence rate constants, i e., 1.36 × 10(8) to 2.25 × 10(8) S(-1). Redox potential E1/2 and band gap energy Eg were observed in the range of -0.689 to -0.784 and 2.530 to 2.610 eV, respectively. Thermal stability was noticed up to 300 °C on the basis of TG and DTA findings. The structures of perylene-azo dyes were confirmed by FTIR and NMR spectroscopy. Graphical Abstract Optical, electrochemical and thermoanalytical investigations on newly-synthesized perylene-3,4,9,10-dianhydride fluorescent dyes.

Quantitative 3D-KPFM imaging with simultaneous electrostatic force and force gradient detection

Kelvin probe force microscopy (KPFM) is a powerful characterization technique for imaging local electrochemical and electrostatic potential distributions and has been applied across a broad range of materials and devices. Proper interpretation of the local KPFM data can be complicated, however, by convolution of the true surface potential under the tip with additional contributions due to long range capacitive coupling between the probe (e.g. cantilever, cone, tip apex) and the sample under test. In this work, band excitation (BE)-KPFM is used to negate such effects. In contrast to traditional single frequency KPFM, multifrequency BE-KPFM is shown to afford dual sensitivity to both the electrostatic force and the force gradient detection, analogous to simultaneous amplitude modulated and frequency modulated KPFM imaging. BE-KPFM is demonstrated on a Pt/Au/SiO(x) test structure and electrostatic force gradient detection is found to lead to an improved lateral resolution compared to electrostatic force detection. Finally, a 3D-KPFM imaging technique is developed. Force volume (FV) BE-KPFM allows the tip-sample distance dependence of the electrostatic interactions (force and force gradient) to be recorded at each point across the sample surface. As such, FVBE-KPFM provides a much needed pathway towards complete tip-sample capacitive de-convolution in KPFM measurements and will enable quantitative surface potential measurements with nanoscale resolution.

HATCN-based charge recombination layers as effective interconnectors for tandem organic solar cells

A comprehensive understanding of the energy-level alignment at the organic heterojunction interfaces is of paramount importance to optimize the performance of organic solar cells (OSCs). Here, the detailed electronic structures of organic interconnectors, consisting of cesium fluoride-doped 4,7-diphenyl-1,10-phenanthroline and hexaazatriphenylene-hexacarbonitrile (HATCN), have been investigated via in situ photoemission spectroscopy, and their impact on the charge recombination process in tandem OSCs has been identified. The experimental determination shows that the HATCN interlayer plays a significant role in the interface energetics with a dramatic decrease in the reverse built-in potential for electrons and holes from stacked subcells, which is beneficial to the charge recombination between HATCN and the adjacent layer. In accordance with the energy-level alignments, the open-circuit voltage of tandem OSC incorporating a HATCN-based interconnector is almost 2 times that of a single-cell OSC, revealing the effectiveness of the HATCN-based interconnectors in tandem organic devices.

Conductive water/alcohol-soluble neutral fullerene derivative as an interfacial layer for inverted polymer solar cells with high efficiency

Dipole induced vacuum level shift has been demonstrated to be responsible for the enhanced efficiency in polymer solar cells (PSCs).The modified energy level alignment could reduce the energy barrier and facilitate charge transport, thereby increasing the efficiency of PSCs. Herein, we report a new mechanism toward enhanced efficiency by using a nondipolar water/alcohol-soluble neutral fullerene derivative to reengineer the surface of the zinc oxide (ZnO) electron extraction layer (EEL) in inverted PSCs. Because of the neutral property (ion-free) of the fullerene derivatives, no dipole moment was introduced at the EEL/active layer interface. A negligible change in open-circuit voltage was observed from inverted PSCs with the neutral fullerene derivative layer. The neutral fullerene derivative layer greatly increased the surface electronic conductivity of the ZnO EEL, suppressed surface charge recombination, and increased the short-circuit current density and fill factor. An overall power conversion efficiency increase of more than 30% from inverted PSCs was obtained. These results demonstrate that the surface electronic conductivity of the EEL plays an important role in high performance inverted PSCs.

Effect of ITO surface modification on the OLED device lifetime

Pretreatment of the indium tin oxide (ITO) surface is generally adopted to improve the charge injection and device performance in the fabrication of organic light-emitting diodes (OLEDs). For the common approaches of surface treatment, such as oxygen plasma treatment, self-assembled monolayer (SAM) adsorption, and the PEDOT:PSS coating, different effects on the device lifetime were observed. A distinctly different driving voltage change with device operation time was obtained and was correlated with the device lifetime. The fast increase in driving voltage for devices based on oxygen-plasma-treated ITO is attributed to the work function change as a result of the change in the composition of the interface with device operation, whereas a rather stable work function for SAM-modified ITO is suggested due to the permanent dipoles associated with the monolayer and the protecting effect of the covalently bound monolayer on the surface composition.

Organic semiconductor density of states controls the energy level alignment at electrode interfaces

Minimizing charge carrier injection barriers and extraction losses at interfaces between organic semiconductors and metallic electrodes is critical for optimizing the performance of organic (opto-) electronic devices. Here, we implement a detailed electrostatic model, capable of reproducing the alignment between the electrode Fermi energy and the transport states in the organic semiconductor both qualitatively and quantitatively. Covering the full phenomenological range of interfacial energy level alignment regimes within a single, consistent framework and continuously connecting the limiting cases described by previously proposed models allows us to resolve conflicting views in the literature. Our results highlight the density of states in the organic semiconductor as a key factor. Its shape and, in particular, the energy distribution of electronic states tailing into the fundamental gap is found to determine both the minimum value of practically achievable injection barriers as well as their spatial profile, ranging from abrupt interface dipoles to extended band-bending regions.

Understanding and being able to predict alignment between the electrode Fermi energy and the transport states in the organic semiconductor is important. Here, the authors report an electrostatic model, capable of reproducing the full range of interfacial energy level alignment regimes.

Rethinking band bending at the P3HT-TiO(2) interface

The advancement of solar cell technology necessitates a detailed understanding of material heterojunctions and their interfacial properties. In hybrid bulk heterojunction solar cells (HBHJs), light-absorbing conjugated polymers are often interfaced with films of nanostructured TiO2 as a cheaper alternative to conventional inorganic solar cells. The mechanism of photovoltaic action requires photoelectrons in the polymer to transfer into the TiO2, and therefore, polymers are designed with lowest unoccupied molecular orbital (LUMO) levels higher in energy than the conduction band of TiO2 for thermodynamically favorable electron transfer. Currently, the energy level values used to guide solar cell design are referenced from the separated materials, neglecting the fact that upon heterojunction formation material energetics are altered. With spectroelectrochemistry, we discovered that spontaneous charge transfer occurs upon heterojunction formation between poly(3-hexylthiophene) (P3HT) and nanocrystalline TiO2. It was determined that deep trap states (0.5 eV below the conduction band of TiO2) accept electrons from P3HT and form hole polarons in the polymer. This equilibrium charge separation alters energetics through the formation of interfacial dipoles and results in band bending that inhibits desired photoelectron injection into TiO2, limiting HBHJ solar cell performance. X-ray photoelectron spectroscopic studies quantified the resultant vacuum level offset to be 0.8 eV. Further spectroelectrochemical studies indicate that 0.1 eV of this offset occurs in TiO2, whereas the balance occurs in P3HT. New guidelines for improved photocurrent are proposed by tuning the energetics of the heterojunction to reverse the direction of the interfacial dipole, enhancing photoelectron injection.

Electroluminescence from graphene quantum dots prepared by amidative cutting of tattered graphite

Size-controlled graphene quantum dots (GQDs) are prepared via amidative cutting of tattered graphite. The power of this method is that the size of the GQDs could be varied from 2 to over 10 nm by simply regulating the amine concentration. The energy gaps in such GQDs are narrowed down with increasing their size, showing colorful photoluminescence from blue to brown. We also reveal the roles of defect sites in photoluminescence, developing long-wavelength emission and reducing exciton lifetime. To assess the viability of the present method, organic light-emitting diodes employing our GQDs as a dopant are first demonstrated with the thorough studies in their energy levels. This is to our best knowledge the first meaningful report on the electroluminescence of GQDs, successfully rendering white light with the external quantum efficiency of ca. 0.1%.

Hydrogen nanobubble at normal hydrogen electrode

Electrochemically formed hydrogen nanobubbles at a platinum rotating disk electrode (RDE) were detected by re-oxidation charge. The dissolution time course of the hydrogen nanobubbles was measured by AFM tapping topography under open-circuit conditions at stationary platinum and gold single-crystal electrodes. The bubble dissolution at platinum was much faster than that at gold because two types of diffusion, bulk and surface diffusion, proceeded at the platinum surface, whereas surface diffusion was prohibited at the gold electrode. These findings indicated that the electrochemical reaction of normal hydrogen electrode partly proceeded heterogeneously on the three-phase boundary around the hydrogen nanobubble.

Elucidating Operating Modes of Bulk-Heterojunction Solar Cells from Impedance Spectroscopy Analysis

We discuss the progress and challenges in the application of impedance spectroscopy analysis to determine key processes and parameters in organic bulk-heterojunction solar cells. When carrier transport or outer interface extraction do not severely influence the solar cell performance, a simple method to quantify the open-circuit voltage loss caused by the kinetics of charge carrier recombination is provided, based on the determination of chemical capacitance and recombination resistance. This easily allows distinguishing between energetic and kinetic effects on photovoltage, and establishes a benchmark for the performance comparison of a set of different cells. A brief discussion of impedance analysis in the much less studied case of collection-limited solar cells is introduced.

The role of gap states in the energy level alignment at the organic-organic heterojunction interfaces

The interface properties of organic-organic heterojunctions (OOHs), such as interface energy level alignment (ELA), interfacial charge transfer, interface nanostructuring, molecular orientation and so on, play an essential role in determining the device performance for some technologically important organic electronic devices, encompassing organic solar cells, bipolar organic field-effect-transistors, and organic light-emitting-diodes. The aim of this article is to provide a balanced assessment on the understanding of the ELA at the small-molecule based OOH interfaces with well-defined molecular orientation, with particular emphasis on the role of gap states in organic thin films. A generalized picture of gap states determined ELA at the OOH interfaces is provided and their implications in relevant organic electronic devices have been discussed.

How the charge-neutrality level of interface states controls energy level alignment in cathode contacts of organic bulk-heterojunction solar cells

Electronic equilibration at the metal-organic interface, leading to equalization of the Fermi levels, is a key process in organic optoelectronic devices. How the energy levels are set across the interface determines carrier extraction at the contact and also limits the achievable open-circuit voltage under illumination. Here, we report an extensive investigation of the cathode energy equilibration of organic bulk-heterojunction solar cells. We show that the potential to balance the mismatch between the cathode metal and the organic layer Fermi levels is divided into two contributions: spatially extended band bending in the organic bulk and voltage drop at the interface dipole layer caused by a net charge transfer. We scan the operation of the cathode under a varied set of conditions, using metals of different work functions in the range of ∼2 eV, different fullerene acceptors, and several cathode interlayers. The measurements allow us to locate the charge-neutrality level within the interface density of sates and calculate the corresponding dipole layer strength. The dipole layer withstands a large part of the total Fermi level mismatch when the polymer:fullerene blend ratio approaches ∼1:1, producing the practical alignment between the metal Fermi level and the charge-neutrality level. Origin of the interface states is linked with fullerene reduced molecules covering the metal contact. The dipole contribution, and consequently the band bending, is highly sensitive to the nature and amount of fullerene molecules forming the interface density of states. Our analysis provides a detailed picture of the evolution of the potentials in the bulk and the interface of the solar cell when forward voltage is applied or when photogeneration takes place.

Approaching charge balance in organic light-emitting diodes by tuning charge injection barriers with mixed monolayers

Self-assembled monolayers (SAMs) of binary mixtures of 1-butylphosphonic acid and the trifluoromethyl-terminated analogue (4,4,4-trifluoro-1-butylphosphonic acid) were formed on ITO surfaces to tune the work function of ITO over a range of 5.0 to 5.75 eV by varying the mixing ratio of the two adsorbents. The mixed SAM-modified ITO surfaces were used as the anode in the fabrication of OLED devices with a configuration of ITO/SAM/HTL/Alq3/MX/Al, where HTL was the NPB or BPAPF hole-transporting layer and MX was the LiF or Cs(2)CO(3) injection layer. It was shown that, depending on the HTL or MX used, the maximum device current and the maximum luminance efficiency occurred with anodes of different modifications because of a shift in the point of hole/electron carrier balance. This provides information on the charge balance in the device and points to the direction to improve the performance.

Band bending in conjugated polymer layers

We use the Kelvin probe method to study the energy-level alignment of four conjugated polymers deposited on various electrodes. Band bending is observed in all polymers when the substrate work function exceeds critical values. Through modeling, we show that the band bending is explained by charge transfer from the electrodes into a small density of states that extends several hundred meV into the band gap. The energetic spread of these states is correlated with charge-carrier mobilities, suggesting that the same states also govern charge transport in the bulk of these polymers.