An Overview and Future Perspectives of Rechargeable Zinc Batteries

Rhombohedral Zinc Hexacyanoferrate as a High-Voltage Cathode Material for Aqueous Mn-ion Batteries

Aqueous metal batteries have emerged as a promising alternative to lithium-ion batteries, offering enhanced safety through the use of aqueous electrolytes. Manganese-ion battery systems remain underexplored despite the low manganese redox potential of -1.19 V (vs the standard hydrogen electrode) as well as high operating voltage and capacity. In this study, a rhombohedral zinc Prussian blue analog (ZnHCF) is investigated for the first time as a cathode material for manganese-ion batteries, demonstrating the highest operating voltage reported in the field (0.55 V vs Ag/AgCl or 1.94 V vs Mn/Mn2⁺). ZnHCF exhibits a discharge capacity of 79.2 mAh g-1 at 0.2 A g-1 with excellent stability, retaining its original performance after 4000 cycles. By performing a comprehensive electrochemical characterization, advanced structural analysis, spectroscopic studies, and diffusion pathway and energy barrier calculations, the charge storage mechanism and structural behavior of ZnHCF are elucidated. This study underlines the application potential of ZnHCF as a high-performing cathode material for manganese-ion batteries and helps achieve a better understanding of Mn electrochemistry, offering valuable insights for advancing aqueous battery systems toward efficient and sustainable energy storage.

Overcoming the Challenges in Aqueous Zinc Metal Batteries: Underlying Issues and Mitigation Strategies

The increasing demand for green and clean energy harvesting and their judicious storage call for pursuing new energy storage technologies. Building better batteries has drawn significant attention to fulfilling the energy demand by delivering the stored electrical energy at the anticipated time and minimal cost. Li-ion batteries play a crucial role in transitioning to a sustainable energy landscape. However, their safety and environmental issues are of concern. Zn-based batteries provide more sustainable solutions due to their low cost, enhanced safety, and environmental benignity. Still, poor thermodynamic reversibility and stability of Zn anode in the aqueous electrolytes prevent its practical application. Significant efforts such as Zn anode surface engineering and electrolyte and/or interface modification alleviate these issues. However, in-depth studies of the root causes associated with the reversibility and stability issues of Zn electrodes are still deficient. Hence, this review focuses on the underlying causes of the major issues (dendrite, hydrogen evolution, corrosion, and passivation) associated with Zn anodes. Furthermore, we have summarized the technological advances that have been made to address these issues. Finally, some promising future directions and perspectives are provided for a further in-depth understanding of thermodynamic irreversibility and to improve the overall performance of the Zn anode.

Deep Eutectic Solvents as Electrolytes for Zn Batteries: Between Blocked Crystallization, Electrochemical Performance and Corrosion Issues

Deep eutectic solvents (DESs) are an emerging class of ionic liquids with high tunability and promise for battery applications. In this study, we investigated acetamide-based DESs for Zn batteries, focusing on a synergistic mixture of two known acetamide (Ace)-based DESs:Ace 4 ZnCl 2 ${{\rm{Ace}}_{\rm{4}} {\rm{ZnCl}}_{\rm{2}} }$ andAce 4 ZnTFSI 2 ${{\rm{Ace}}_{\rm{4}} {\rm{ZnTFSI}}_{\rm{2}} }$ . By combining these two DESs in various ratios, we aimed to enhance ionic conductivity and optimize electrochemical performance while addressing corrosion concerns. The resulting ternary mixtures exhibit superior ionic mobility, with the highest conductivity observed forAce 4 ( ZnTFSI 2 )​ 0 . 85 ( ZnCl 2 )​ 0 . 15 ${{\rm{Ace}}_{\rm{4}} {\rm{(ZnTFSI}}_{\rm{2}} {\rm{)}}_{{\rm{0}}{\rm{.85}}} {\rm{(ZnCl}}_{\rm{2}} {\rm{)}}_{{\rm{0}}{\rm{.15}}} }$ , which balances performance and stability. However, increased ionic mobility introduces crystallization challenges, limiting liquid-phase stability. Despite these challenges, the optimized DES mixture demonstrates excellent cycling performance with reduced overpotentials and acceptable corrosion levels, offering a viable pathway for scalable Zn battery applications.

Engineering a wirelessly self-powered neural scaffold based on primary battery principle to accelerate nerve cell differentiation

Electrical stimulation displayed tremendous potential in promoting nerve regeneration. However, the current electrical stimulation therapy required complex traversing wires and external power sources, which significantly limited its practical application. Herein, a self-powered nerve scaffold based on primary battery principle was gradient printed by laser additive manufacturing technique. Specifically, poly-L-lactide (PLLA) containing Ag2O and Zn nanoparticles was prepared as the positive and negative electrode of the scaffold respectively, and PLLA/PPy was prepared as the middle conductive segment. In simulated body fluid, the negative electrode underwent oxidation to lose electrons and become positively charged. The lost electrons were transferred to the positive segment in a directed and orderly manner via the middle conductive segment, causing the positive electrode to be enriched electrons and become negatively charged. Subsequently, two segments can generate a potential difference to form an electric field, further generating current. Not merely, the redox process can release Ag+ and Zn2+ to endow the scaffold with antibacterial properties. Results showed that the scaffold could generate a current of up to 17.2 μA, which promoted a 14-fold increase in calcium ion influx and increased the mRNA expression of neuronal markers MAP2 by 24-fold. Moreover, the antibacterial rates of the scaffold against E. coli and S. aureus could reach 92.6 % and 91.9 %, respectively.

Structural codes of organic electrode materials for rechargeable multivalent metal batteries

Rechargeable multivalent metal batteries (MMBs) are considered as promising alternatives to Li-ion and Pb-acid batteries for grid-scale energy storage applications due to the multi-electron redox capability of metal anodes. However, the conventional inorganic cathodes used in MMBs face challenges with the sluggish diffusivity and poor storage of charge-dense multivalent cations in their crystal lattice. Organic electrode materials (OEMs), on the other hand, offer several advantages as MMB cathodes, including flexible structural designability, high resource availability, sustainability, and a unique ion-coordination storage mechanism. This review explores the intrinsic connection between the structural features of OEMs and their charge storage performance, aiming to unveil key design principles for organic molecules used in various MMB applications. We begin with an overview of the fundamental aspects of different MMBs (i.e., Zn/Mg/Ca/Al batteries), covering electrolyte selection, metal stripping/plating electrochemistry, and the fundamentals of cathode operation. From a theoretical understanding of redox activities, we summarize the properties of different redox sites and correlate the electrochemical properties of OEMs with various structural factors. This analysis further leads to the introduction of critical design considerations for different types of OEMs. We then critically review a wide range of organic compounds for MMBs, from small organic molecules to redox-active polymers and covalent-organic frameworks, focusing on their structure-property relationships, key electrochemical parameters, and strengths and shortcomings for multivalent ion storage. Finally, we discuss the existing challenges and propose potential solutions for further advancing OEMs in MMBs.

Micropore confinement for a highly rechargeable aqueous Zn-hydroquinone battery with exceptional capacity

A highly rechargeable battery utilizing a zinc anode, aqueous ZnSO4 electrolyte, and hydroquinone (QH2) cathode is reported. QH2 immobilized within the pores of microporous carbon delivered a high specific capacity (482 mA h g-1 at 0.5C), approaching the theoretical specific capacity of QH2 (486.8 mA h g-1). A high capacity was maintained even after 1000 charge-discharge cycles (99% retention of initial charge capacity), with 99% coulombic efficiency. The environentally green Zn-QH2 battery did not include any heavy or transition metal ions, or corrosive or flammable electrolytes, and utilized abundant and readily available materials.

Fundamentals, Advances and Perspectives in Designing Eutectic Electrolytes for Zinc-Ion Secondary Batteries

Zinc-ion secondary batteries have been competitive candidates since the "post-lithium-ion" era for grid-scale energy storage, owing to their plausible security, high theoretical capacity, plentiful resources, and environment friendliness. However, many encumbrances like notorious parasitic reactions and Zn dendrite growth hinder the development of zinc-ion secondary batteries remarkably. Faced with these challenges, eutectic electrolytes have aroused notable attention by virtue of feasible synthesis and high tunability. This review discusses the definition and advanced functionalities of eutectic electrolytes in detail and divides them into nonaqueous, aqueous, and solid-state eutectic electrolytes with regard to the state and component of electrolytes. In particular, the corresponding chemistry concerning solvation structure regulation, electric double layer (EDL) structure, solid-electrolyte interface (SEI) and charge/ion transport mechanism is systematically elucidated for a deeper understanding of eutectic electrolytes. Moreover, the remaining limitations and further development of eutectic electrolytes are discussed for advanced electrolyte design and extended applications.

Buried interface engineering towards stable zinc anodes for high-performance aqueous zinc-ion batteries

The dendrite and corrosion issues still remain for zinc anodes. Interface modification of anodes has been widely used for stabilizing zinc anodes. However, it is still quite challenging for such modification to simultaneously suppress zinc dendrites and corrosion issues. Herein, we propose a new strategy of buried interface engineering to effectively stabilize Zn anodes, in which a zincophilic Sn layer is buried by a corrosion-resistant ZnS layer (SZS). The buried Sn layer has a strong adsorption energy towards Zn atoms, which accelerates the nucleation of Zn atoms and induces smooth deposition. Meanwhile, the outer ZnS layer protects the newly deposited zinc layer from the corrosion by the electrolyte. As a result, the SZS@Zn symmetric cell demonstrates stable cycling for over 280 h compared to Bare Zn (41 h) at a high current of 10 mA cm-2 and a high areal capacity of 10 mAh cm-2. Besides, SZS@Zn//MnO2 full cells also achieve enhanced long-term cycling stability of 63.6% for 1000 cycles at a high rate of 10 C, compared to Bare Zn (47.2%). This work provides a new strategy of buried interface for the rational design of highly stable metal anodes for other metal batteries.

Non-rechargeable batteries: a review of primary battery technology and future trends

Primary batteries, or non-rechargeable batteries, are crucial for powering a diverse range of low-drain applications, from household items to specialized devices in medical and aerospace industries. Despite the growth of rechargeable battery technologies, primary batteries offer distinct advantages, including cost-effectiveness, reliability, and long shelf life. This review examines the current state of primary battery technology, exploring the major types, including alkaline, zinc-carbon, lithium, and silver oxide batteries, and discussing their significance in both everyday and specialized applications. Key challenges, such as the environmental impact of battery disposal, limitations in energy density, and performance optimization, are highlighted as areas of ongoing research. Advances in nanotechnology, materials science, and novel chemistries, such as biodegradable materials and high-performance lithium-based systems, promise to improve energy density and sustainability in the future. The review also outlines future trends, including increased miniaturization for medical devices, the development of robust batteries for extreme environments, and new battery chemistries that can replace or enhance current primary battery technologies. Addressing these challenges and gaps is essential for ensuring that primary batteries remain a viable and sustainable energy storage solution in the future.

Aqueous Alkaline Zinc-Iodine Battery with Two-Electron Transfer

While many cathode materials have been developed for mild electrolyte-based Zn batteries, the lack of cathode materials hinders the progress of alkaline zinc batteries. Halide iodine, with its copious valence nature and redox possibilities, is considered a promising candidate. However, energetic alkaline iodine redox chemistry is impeded by an alkali-unadapted I2 element cathode and thermodynamically unstable reaction products. Here, we formulated and evaluated an aqueous alkaline Zn-iodine battery with a two-electron transfer employing an organic iodized salt cathode and a Cl--manipulated electrolyte. The single-step redox reaction of the I-/I+ couple resulted in a high discharge plateau of 1.68 V and a capacity of 385 mA h g-1. Our battery reached an energy density of 577 W h kg-1, superior to that of reported counterparts. Theoretical and experimental characterizations determined the redox chemistry between alkaline and iodine. We believe the developed iodine chemistry in alkaline environments can enrich cathode materials for alkaline batteries.

All-Cellulose-based flexible Zinc-Ion battery enabled by waste pomelo peel

Aqueous zinc-ion batteries are attracting extensive attention due to the long-term service life and credible safety as well as the superior price performance between the low cost of manufacture and high energy density. The fabrication of inexpensive, high-performance flexible solid-state zinc-ion batteries, thus, are urgently need for the blooming wearable electronics. Herein, as a proof-of-concept study of waste into wealth, cellulose flakes derived from waste pomelo peel are utilized as the substrate for electrodes and hydrogel electrolytes into a flexible rocking-chair zinc-ion battery. The unique sandwich-type structure holding the flake-like cellulose substrate and linear carbon nanotubes endows the flexible cathode and anode with fast ion and electron transportation. The obtained cellulose-based hydrogel electrolytes on account of special affinity with aqueous ZnSO4 electrolyte output an excellent ionic conductivity. The assembled flexible rocking-chair zinc-ion battery benefitting from the synergistic effect of sandwich-type electrodes and cellulose-based hydrogel electrolytes demonstrates outstanding electrochemical performance and mechanical properties. This work not only puts up an effective roadmap for flexible battery devices, but also reveals the great potential of waste biomass materials in energy storage applications.

Electrolyte Engineering with TFA- Anion-Rich Solvation Structure to Construct Highly Stable Zn2+/Na+ Dual-Salt Batteries

Electrolyte engineering is recognized as an effective technique for high-performance aqueous zinc-ion rechargeable batteries, addressing difficulties such as free water decomposition, zinc anode corrosion, and zinc dendrite growth. Different from traditional strategies in aqueous electrolyte systems, this work focuses on organic electrolytes involving zinc trifluoroacetate hydrate (Zn(TFA)2·xH2O), sodium trifluoroacetate (NaTFA) dual-salt and acetonitrile (AN) solvent, in which trifluoroacetate anions (TFA- anions) have strong affinity toward zinc ions to form anion-rich solvates, thus inducing an inorganic-rich solid electrolyte interphase (SEI) to protect Zn from dendrite growth and side reactions. The Zn anode manifests long-term cycling over 2400 h at a current density of 0.5 mA cm-2 with a high Coulombic efficiency (CE) of 99.75%, showing an areal capacity as high as 5 mAh cm-2. Owing to the high reversibility of the sodium ions intercalation/deintercalation process in Na2MnFe(CN)6, the Zn//Na2MnFe(CN)6 full cells with the dual-salt electrolyte perform much better in terms of capacity retention than a device with Zn(TFA)2/AN electrolyte. This approach may open a new avenue for efficient zinc-ion rechargeable batteries via developing organic electrolytes.

Experimental Validation of Density Functional Theory Predictions on Structural Water Impact in Vanadium Oxide Cathodes for Zinc-Ion Batteries

This study combines experimental methods with density flooding theory (DFT) calculations to investigate the enhancement of the electrochemical performance of vanadium oxide cathodes for aqueous zinc ion batteries (AZIBs) through strategic water content management. DFT predictions indicated that a moderate presence of structural water optimizes electrical conductivity and facilitates zinc ion diffusion. These theoretical insights are empirically validated by synthesizing AlVO-1.6 H2O using a hydrothermal method, which exhibited superior electrochemical properties. This material demonstrated an impressive initial capacity of 316 mAh g-1 at 0.2 A g-1, with robust capacity retention after extended cycling. Remarkably, even at an elevated current density of 10 A g-1, it sustains a capacity of 161.6 mAh g-1, while maintaining a capacity retention of 97.6% over 2000 cycles. The results confirm that adjusting the structural water content in vanadium oxides significantly boosts their electrochemical capabilities, aligning experimental outcomes with computational forecasts and showcasing a novel approach for developing high-performance cathodes in energy storage technologies.

A Versatile Redox-Active Electrolyte for Solid Fixation of Polyiodide and Dendrite-Free Operation in Sustainable Aqueous Zinc-Iodine Batteries

Practical utilization of zinc-iodine (Zn-I2) batteries is hindered by significant challenges, primarily stemming from the polyiodide shuttle effect on the cathode and dendrite growth on the anode. Herein, a feasible redox-active electrolyte has been introduced with tetraethylammonium iodide as an additive that simultaneously addresses the above mentioned challenges via polyiodide solidification on the cathode and the electrostatic shielding effect on the anode. The tetraethylammonium (TEA+) captures water-soluble polyiodide intermediates (I3 -, I5 -), forming a solid complex at the cathode, thereby suppressing capacity loss during charge/discharge. Furthermore, the TEA+ mitigates dendrite growth on the Zn anode via the electrostatic shielding effect, promoting uniform and compact Zn deposition at the anode. Consequently, the Zn||Zn symmetric cell demonstrates superior cycling stability during Zn plating/stripping over 4,200 h at 1 mA cm-2 and 1 mAh cm-2. The Zn||NiNC full-cell exhibits a stable capacity retention of 98.4% after 20 000 cycles (>5 months) with near-unity Coulombic efficiency at 1 A g-1. The study provides novel insights for establishing a new direction for low-cost, sustainable, and long-lifespan Zn-I2 batteries.

Bilayered Vanadium Oxides Pillared by Strontium Ions and Water Molecules as Stable Cathodes for Rechargeable Zn-Metal Batteries

Vanadium-based compounds have attracted significant attention as cathodes for aqueous zinc metal batteries (AZMBs) because of their remarkable advantages in specific capacities. However, their low diffusion coefficient for zinc ions and structural collapse problems lead to poor rate capability and cycle stability. In this work, bilayered Sr0.25V2O5·0.8H2O (SVOH) nanowires are first reported as a highly stable cathode material for rechargeable AZMBs. The synergistic pillaring effect of strontium ions and water molecules improves the structural stability and ion transport dynamics of vanadium-based compounds. Consequently, the SVOH cathode exhibits a high capacity of 325.6 mAh g-1 at 50 mA g-1, with a capacity retention rate of 72.6% relative to the maximum specific capacity at 3.0 A g-1 after 3000 cycles. Significantly, a unique single-nanowire device is utilized to demonstrate the excellent conductivity of the SVOH cathode directly. Additionally, the energy storage mechanism of zinc insertion and extraction is investigated using a variety of advanced in situ and ex situ analysis techniques. This method of ion intercalation to improve electrochemical performance will further promote the development of AZMBs in large-scale applications.

3D Leaf-Like Copper-Zinc Alloy Enables Dendrite-Free Zinc Anode for Ultra-Long Life Aqueous Zinc Batteries

Metallic zinc exhibits immense potential as an anode material for aqueous rechargeable zinc batteries due to its high theoretical capacity, low redox potential, and inherent safety. However, practical applications are hindered by dendrite formation and poor cycling stability. Herein, a facile substitution reaction method is presented to fabricate a 3D leaf-like Cu@Zn composite anode. This unique architecture, featuring a 3D network of leaf-like Cu on a Zn foil surface, significantly reduces nucleation overpotential and facilitates uniform Zn plating/stripping, effectively suppressing dendrite growth. Notably, an alloy layer of CuZn5 forms in situ on the 3D Cu layer during cycling. DFT calculations reveal that this CuZn5 alloy possesses a lower Zn binding energy compared to both Cu and Zn metal, further promoting Zn plating/stripping and enhancing electrochemical kinetics. Consequently, the symmetric Cu@Zn electrode exhibits remarkable cycling stability, surpassing 1300 h at 0.5 mA cm-2 with negligible dendrite formation. Furthermore, full cells comprising Cu@Zn||VO2 exhibit superior capacity and rate performance compared to bare Zn anodes. This work provides a promising strategy for constructing highly stable and efficient Zn anodes for next-generation aqueous zinc batteries.

Recent Functionalized Strategies of Metal-Organic Frameworks for Anode Protection of Aqueous Zinc-Ion Battery

The inherent benefits of aqueous Zn-ion batteries (ZIBs), such as environmental friendliness, affordability, and high theoretical capacity, render them promising candidates for energy storage systems. Nevertheless, the Zn anodes of ZIBs encounter severe challenges, including dendrite formation, hydrogen evolution reaction, corrosion, and surface passivation. These would result in the infeasibility of ZIBs in practical situations. To this end, artificial interfaces with functionalized materials are crafted to protect the Zn anode. They have the capability to modulate the zinc ion flux in proximity to the electrode surface and shield it from aqueous electrolytes by leveraging either size effects or charge effects. Considering metal-organic frameworks (MOFs) with tunable pore size, chemical composition, and stable framework structures, they have emerged as effective materials for building artificial interfaces, prolonging the lifespan, and improving the unitization of Zn anode. In this review, the contributions of MOFs for protecting Zn anode, which mainly involves facilitating homogeneous nucleation, manipulating selective deposition, regulating ion and charge flux, accelerating Zn desolvation, and shielding against free water and anions are comprehensively summarized. Importantly, the future research trajectories of MOFs for the protection of the Zn anode are underscored, which may propose new perspectives on the practical Zn anode and endow the MOFs with high-value applications.

Zn-doped NiMoO4 enhances the performance of electrode materials in aqueous rechargeable NiZn batteries

In this work, zinc was introduced to prepare Ni1-xZnxMoO4 (0 ≤ x ≤ 1) nanoflake electrodes to increase the energy density and improve the cycling stability for a wider range of applications of aqueous rechargeable nickel-zinc (NiZn) batteries. This was achieved using a facile hydrothermal method followed by thermal annealing, which can be easily scaled up for mass production. Owing to the unique nanoflake structures, improved conductivity, and tunable electronic interaction, excellent electrochemical performance with high specific capacitance and reliable cycling stability can be achieved. When the Zn doping is 25%, the Ni0.75Zn0.25MoO4 nanoflake electrode displays a high specific capacitance of 345.84 mA h g-1 (2490 F g-1) at a current density of 1 A g-1 and improved cycling stability at a high current density of 10 A g-1. NiZn cells assembled with Ni0.75Zn0.25MoO4 nanoflake electrodes and zinc electrodes have a maximum specific capacity of 344.7 mA h g-1 and an energy density of 942.53 W h kg-1. This design strategy for nickel-based electrode materials enables high-performance energy storage and opens up more possibilities for other battery systems in the future.

Advancements in Rechargeable Zn-Air Batteries with Transition-Metal Dichalcogenides as Bifunctional Electrocatalyst

This review covers recent progress on transition metal dichalcogenides (TMDs) as bifunctional electrocatalysts for Zinc-air batteries (ZABs), emphasizing their suitable surface area, electrocatalytic active sites, stability in acidic/basic environments, and tunable electronic properties. It discusses strategies like defect engineering, doping, interface, and structural modifications of TMDs nanostructures for enhancing the performances of ZABs. Zinc-air batteries are promising energy storage devices owing to their high energy density, low cost, and environmental friendliness. However, the development of durable and efficient bifunctional electrocatalysts is a major concern for Zn-air batteries. In this review, we summarize the recent progress on transition metal dichalcogenides (TMDs) as bifunctional electrocatalysts for Zn-air batteries. We discuss the advantages of TMDs, such as high activity, good stability, and tunable electronic structure, as well as the challenges, such as low conductivity, poor durability, and limited active sites. We also highlight the strategies for fine-tuning the properties of TMDs, such as defect engineering, doping, hybridization, and structural engineering, to enhance their catalytic performance and stability. We provide a comprehensive and in-depth analysis of the applications of TMDs in Zn-air batteries, demonstrating their potential as low-cost, abundant, and environmentally friendly alternatives to noble metal catalysts. We also suggest future directions like exploring new TMDs materials and compositions, developing novel synthesis and modification techniques, investigating the interfacial interactions and charge transfer processes, and integrating TMDs with other functional materials. This review aims to illuminate the path forward for the development of efficient and durable Zn-air batteries, aligning with the broader objectives of sustainable energy solutions.

Physical Mechanisms of Improved Performance of Scaffolded Zinc-Silver Battery Cathodes

Nanostructuring can greatly improve the electrode stability of rechargeable battery systems, such as Zn-Ag. In this report, we investigate the physical mechanisms by which nanostructuring alters structural properties of nanomaterials and thereby influences the structural stability of electrodes. We specifically consider the effects of Au-based nanoscaffolds on Ag. Through density functional theory calculations, we propose that the charge transfer at the Au-Ag interface can facilitate the formation of Ag2O from Ag centers. Structural analysis of samples prepared in this work shows that Ag2O is extruded from Au-Ag material in the form of sheets. Interestingly, the length scale of such protrusions depends on the Au mole fraction that significantly alters the system's overall structural morphology. We rationalize these findings via kinetic Monte Carlo simulations of the Ag2O growth process and highlight the role of Au as a heterogeneous nucleation center.

Ion-Sieving Separator Functionalized by Natural Mineral Coating toward Ultrastable Zn Metal Anodes

Aqueous zinc-ion batteries (AZIBs) exhibit promising prospects in becoming large-scale energy storage systems due to environmental friendliness, high security, and low cost. However, the growth of Zn dendrites and side reactions remain heady obstacles for the practical application of AZIBs. To solve these challenges, a functionalized Janus separator is successfully constructed by coating halloysite nanotubes (HNTs) on glass fiber (GF). Impressively, the different electronegativity on the inner and outer surfaces of HNTs endows the HNT-GF separator with ion-sieving property, leading to a significantly high transference number of Zn2+ (tZn2+ = 0.71). Meanwhile, the HNT-GF separator works as an interfacial ion comb to regular Zn2+ flux and realizes multisite progressive nucleation, bringing decreased nucleation overpotential and uniform Zn2+ deposition. Consequently, the HNT-GF separator enables the Zn anode to display an ultralong plating/stripping life of 3000 h and high rate tolerance with a stable long cycle life even under a density of 50 mA cm-2. Moreover, the Z n ∥ H N T - G F ∥ M n O 2 full cell represents an ultrastable cycling stability with a high capacity retention of 93.4% even after 1000 cycles at a current density of 2 A g-1. This work provides a convenient method for the separator modification of AZIBs.

Interfacial chemistry in multivalent aqueous batteries: fundamentals, challenges, and advances

As one of the most promising electrochemical energy storage systems, aqueous batteries are attracting great interest due to their advantages of high safety, high sustainability, and low costs when compared with commercial lithium-ion batteries, showing great promise for grid-scale energy storage. This invited tutorial review aims to provide universal design principles to address the critical challenges at the electrode-electrolyte interfaces faced by various multivalent aqueous battery systems. Specifically, deposition regulation, ion flux homogenization, and solvation chemistry modulation are proposed as the key principles to tune the inter-component interactions in aqueous batteries, with corresponding interfacial design strategies and their underlying working mechanisms illustrated. In the end, we present a critical analysis on the remaining obstacles necessitated to overcome for the use of aqueous batteries under different practical conditions and provide future prospects towards further advancement of sustainable aqueous energy storage systems with high energy and long durability.

Energetic Hypervalent Organoiodine Electrochemistry for Aqueous Zinc Batteries

Hypervalent organoiodine compounds have been extensively utilized in organic synthesis, yet their electrochemical properties remain unexplored despite their theoretically high redox potential compared with inorganic iodine, which primarily relies on the I-/I0 redox couple in battery applications. Here, the fundamental redox mechanism of hypervalent organoiodine in a ZnCl2 aqueous electrolyte is established for the first time using the simplest iodobenzene (PhI) as a model compound. We validated that the PhI to PhICl2 transition is a single-step and reversible reaction, enabling two-electron transfer of I+/I3+ redox chemistry (1.9 V vs Zn2+/Zn) with high capacity (422 mAh giodine-1, and 262.6 mAh g-1 based on PhI) and high theoretical energy density (801.8 Wh kg-1). It was also elucidated that such organoiodine electrochemistry exhibits rich tunability in terms of the global reactivity of various PhI derivatives, including multiple iodine-substituted isomers and functional substituents. Additionally, the stabilizing anion ligands affect the reversibility and stability of trivalent organoiodine compounds. By limiting side reactions and improving the stability of trivalent organoiodine at low temperatures, the zinc-PhI battery demonstrated the feasibility of I+/I3+ conversion and sustained stable performance over 400 cycles. This work bridges the gap between hypervalent organoiodine chemistry and battery technology, highlighting the potential for future high-performance battery applications.

An Overview and Future Perspectives of Rechargeable Flexible Zn-Air Batteries

Environmental friendliness and low-cost zinc-air batteries for flexible rechargeable applications have great potential in the field of flexible electronics and smart wearables owing to high energy density and long service life. However, the current technology of flexible rechargeable zinc-air batteries to meet the commercialization needs still facing enormous challenges due to the poor adaptability of each flexible component of the zinc-air batteries. This review focused on the latest progress over the past 5 years in designing and fabricating flexible self-standing air electrodes, flexible electrolytes and zinc electrodes of flexible Zn-air batteries, meanwhile the basic working principle of each component of flexible rechargeable zinc-air batteries and battery structures optimization are also described. Finally, challenges and prospects for the future development of flexible rechargeable zinc-air batteries are discussed. This work is intended to provide insights and general guidance for future exploration of the design and fabrication on high-performance flexible rechargeable zinc-air batteries.

Bridging agro-science and human nutrition: zinc nanoparticles and biochar as catalysts for enhanced crop productivity and biofortification

The integration of zinc nanoparticles (Zn NPs) with biochar offers a transformative approach to sustainable agriculture by enhancing plant productivity and human nutrition. This combination improves soil health, optimizes nutrient uptake, and increases resilience to environmental stressors, leading to superior crop performance. Our literature review shows that combining Zn NPs with biochar significantly boosts the crop nutrient composition, including proteins, vitamins, sugars, and secondary metabolites. This enhancement improves the plant tolerance to environmental challenges, crop quality, and shelf life. This technique addresses the global issue of Zn deficiency by biofortifying food crops with increased Zn levels, such as mung beans, lettuce, tomatoes, wheat, maize, rice, citrus, apples, and microgreens. Additionally, Zn NPs and biochar improve soil properties by enhancing water retention, cation exchange capacity (CEC), and microbial activity, making soils more fertile and productive. The porous structure of biochar facilitates the slow and sustained release of Zn, ensuring its bioavailability over extended periods and reducing the need for frequent fertilizer applications. This synergy promotes sustainable agricultural practices and reduces the environmental footprint of the traditional farming methods. However, potential ecological risks such as biomagnification, nanoparticle accumulation, and toxicity require careful consideration. Comprehensive risk assessments and management strategies are essential to ensure that agricultural benefits do not compromise the environmental or human health. Future research should focus on sustainable practices for deploying Zn NPs in agriculture, balancing food security and ecological integrity and positioning this approach as a viable solution for nutrient-efficient and sustainable agriculture.

Polyacrylate modified Cu electrode for selective electrochemical CO2 reduction towards multicarbon products

Highly selective production of value-added multicarbon (C2+) products via electrochemical CO2 reduction reaction (eCO2RR) on polycrystalline copper (Cu) remains challenging. Herein, the facile surface modification using poly (α-ethyl cyanoacrylate) (PECA) is presented to greatly enhance the C2+ selectivity for eCO2RR over polycrystalline Cu, with Faradaic efficiency (FE) towards C2+ products increased from 30.1% for the Cu electrode to 72.6% for the obtained Cu-PECA electrode at -1.1 V vs. reversible hydrogen electrode (RHE). Given the well-determined FEs towards C2+ products, the partial current densities for C2+ production could be estimated to be -145.4 mA cm-2 for the Cu-PECA electrode at -0.9 V vs. RHE in a homemade flow cell. In-situ spectral characterizations and theoretical calculations reveal that PECA featured with electron-accepting -C≡N and -COOR groups decorated onto the Cu electrode could inhibit the adsorption of *H intermediates and stabilize the *CO intermediates, given the redistributed interfacial electron density and the raised energy level of d-band center (Ed) of Cu active sites, thus facilitating the C-C coupling and then the C2+ selective production. This study is believed to be guidable to the modification of electrocatalysts and electrodes with polymers to steer the surface adsorption behaviors of reaction intermediates to realize practical eCO2RR towards value-added C2+ products with high activity and selectivity.

Enhancement of the electrochemical performance of zinc-silver batteries with a gold nano-scaffold

Primary zinc-silver batteries are widely employed in military, aerospace, and marine applications. However, the development of secondary zinc-silver batteries is still a subject of on-going research. For example, these batteries suffer from rapid capacity loss during cycling due to instabilities of the zinc anode and the silver cathode. While there is a large body of work on the Zn anode, there is limited work toward stabilizing the Ag electrode and thereby achieving a long cycle life. In this work, we propose a gold-silver nanostructure where gold acts as a scaffolding material and improves the retention of structural integrity during cell cycling. We show that this nanostructure improves battery capacity as well as capacity retention after 35 cycles. Our work emphasizes the role of nanostructuring in enabling a newer secondary battery chemistry based on existing primary ones.

Novel Zn0.079V2O5·0.53H2O/Graphene aerogel as high-rate and long-life cathode materials of aqueous zinc-ion batteries

Aqueous zinc-ion batteries (ZIBs) have attracted more and more attention due to their advantages of low cost, high safety and environmental protection. Unfortunately, the unsatisfactory capacity at high current density and long-term cycling performance of cathode materials hinder the development of ZIBs. Here, a novel Zn0.079V2O5·0.53H2O/graphene (ZVOH@rGO) hybrid aerogel composed of ultrathin Zn0.079V2O5·0.53H2O (ZVOH) nanoribbons and 3D continuous graphene conductive network was successfully prepared and used as cathode of ZIBs. Taking advantage of the synergistic effects associated with ion doping, morphology control and unique aerogel structure, the ZVOH@rGO electrode demonstrated ultrafast charge/discharge capability and remarkable cycling stability: A high reversible capacity of 286.7 mAh g-1 was achieved at a current density as large as 30 A g-1, and an impressive capacity retention ratio of 75.6 % was realized over 9800 ultra-long cycles at 12 A g-1. This work is of great significance for the synthesis modification of vanadium oxides and the development of high performance ultrafast charge-discharge ZIBs.

Perfluoro-1-butanesulfonic acid etching strategy for dendrite suppression in aqueous zinc metal batteries

Perfluoro-1-butanesulfonic acid (PFBS) was used to etch on the surface of a zinc anode to introduce a 3D C4F9O3S-Zn interface layer with unique fluorine groups (Zn@PFBS) to inhibit the formation of dendrites. The C-F chains in the Zn@PFBS coating enhance the anode hydrophobicity of the zinc metal, which not only suppresses the HER of the surface of the zinc metal, but also strengthens the corrosion resistance of the zinc metal. Meanwhile, -SO3 - in the coating enhanced the binding energy with Zn2+, which acted as a nucleation site on the surface of the zinc anode to induce the uniform deposition of Zn2+ and inhibited the disordered growth of zinc dendrites. As a result, the symmetric battery assembled with the Zn@PFBS anode achieved a stable cycling of 6200 cycles at 5 mA cm-2 to 1 mA h cm-2. Meanwhile, the Zn@PFBS anode exhibited a higher cycling performance with a capacity retention rate of 78.6% after 1000 cycles in a Zn@PFBS//Na5V12O32 (NVO) full cell.

Engineering Covalent Organic Frameworks Toward Advanced Zinc-Based Batteries

Zinc-based batteries (ZBBs) have demonstrated considerable potential among secondary batteries, attributing to their advantages including good safety, environmental friendliness, and high energy density. However, ZBBs still suffer from issues such as the formation of zinc dendrites, occurrence of side reactions, retardation of reaction kinetics, and shuttle effects, posing a great challenge for practical applications. As promising porous materials, covalent organic frameworks (COFs) and their derivatives have rigid skeletons, ordered structures, and permanent porosity, which endow them with great potential for application in ZBBs. This review, therefore, provides a systematic overview detailing on COFs structure pertaining to electrochemical performance of ZBBs, following an in depth discussion of the challenges faced by ZBBs, which includes dendrites and side reactions at the anode, as well as dissolution, structural change, slow kinetics, and shuttle effect at the cathode. Then, the structural advantages of COF-correlated materials and their roles in various ZBBs are highlighted. Finally, the challenges of COF-correlated materials in ZBBs are outlined and an outlook on the future development of COF-correlated materials for ZBBs is provided. The review would serve as a valuable reference for further research into the utilization of COF-correlated materials in ZBBs.

Aqueous Zinc-Chlorine Battery Modulated by a MnO2 Redox Adsorbent

Aqueous zinc-chlorine battery with high discharge voltage and attractive theoretical energy density is expected to become an important technology for large-scale energy storage. However, the practical application of Zn-Cl2 batteries has been restricted due to the Cl2 cathode with sluggish kinetics and low Coulombic efficiency (CE). Here, an aqueous Zn-Cl2 battery using an inexpensive and effective MnO2 redox adsorbent (referred to Zn-Cl2@MnO2 battery) to modulate the electrochemical performance of the Cl2 cathode is developed. Density functional theory calculations reveal that the existence of the intermediate state Clads free radical catalyzed by MnO2 on the Cl2 cathode contributes to the charge storage capacity, which is the key to modulate the electrode and improve the electrochemical performance. Further analysis of the Cl2 cathode kinetics discloses the adsorption and catalytic roles of the MnO2 redox adsorbent. The Zn-Cl2@MnO2 battery displays an enhanced discharge voltage of 2.0 V at a current density of 2.5 mA cm-2, and stable 1000 cycles with an average CE of 91.6%, much superior to the conventional Zn-Cl2 battery with an average CE of only 66.8%. The regulation strategy to the Cl2 cathode provides opportunities for the future development of aqueous Zn-Cl2 batteries.

Crystalline MnCO3@Amorphous MnOx Composite as Cathode Material for High-Performance Aqueous Zinc-Ion Batteries

Rechargeable aqueous zinc-ion batteries (RAZIBs) have received extensive attention because of their advantages of low cost, high safety, and nontoxicity. However, problems such as dissolution of the active cathode material, dendrites/passivation of the zinc anode, and slow reaction kinetics hindered their further applications. In this work, a crystalline/amorphous composite-type material composed of crystalline MnCO3 and amorphous MnOx was prepared and used as the cathode material for RAZIBs. The MnCO3@amorphous MnOx (MnCO3@A-MnOx) composite possesses the merits of both the pure crystalline phase of MnCO3 and the amorphous phase of MnOx, which can deliver better electrochemical performance than the corresponding single component in repeated cycles. In addition, crystalline MnCO3 undergoes a complex phase transition to the active MnO2 during the first charge process, providing the composite with a stable structure and additional electrochemical capacity. The electrochemical measurement results indicate that the MnCO3@A-MnOx electrode can display high reversible discharge capacity at 0.1 A g-1, excellent rate performance at 5.0 A g-1, and long cycling stability over 2000 cycles, showing great potential as a cathode material for high-performance RAZIBs.

Zn-based batteries for sustainable energy storage: strategies and mechanisms

Batteries play a pivotal role in various electrochemical energy storage systems, functioning as essential components to enhance energy utilization efficiency and expedite the realization of energy and environmental sustainability. Zn-based batteries have attracted increasing attention as a promising alternative to lithium-ion batteries owing to their cost effectiveness, enhanced intrinsic safety, and favorable electrochemical performance. In this context, substantial endeavors have been dedicated to crafting and advancing high-performance Zn-based batteries. However, some challenges, including limited discharging capacity, low operating voltage, low energy density, short cycle life, and complicated energy storage mechanism, need to be addressed in order to render large-scale practical applications. In this review, we comprehensively present recent advances in designing high-performance Zn-based batteries and in elucidating energy storage mechanisms. First, various redox mechanisms in Zn-based batteries are systematically summarized, including insertion-type, conversion-type, coordination-type, and catalysis-type mechanisms. Subsequently, the design strategies aiming at enhancing the electrochemical performance of Zn-based batteries are underscored, focusing on several aspects, including output voltage, capacity, energy density, and cycle life. Finally, challenges and future prospects of Zn-based batteries are discussed.

MOF-modified dendrite-free gel polymer electrolyte for zinc-ion batteries

Zinc-ion batteries are promising candidates for large-scale energy storage, and gel polymer electrolytes (GPEs) play an important role in zinc-ion battery applications. Metal-organic frameworks (MOFs) are characterized by large specific surface areas and ordered pores. This highly ordered microporous structure provides a continuous transport channel for ions, thus realizing the high-speed transmission of ions. In this paper, an MOF-modified dendrite-free GPE was designed. The incorporation of MOF particles not only reduces the crystallinity of the polymer, increases the motility of the molecular chains, and facilitates the transfer of Zn2+, but also attracts anions to reduce polarization during electrochemical reactions. It was shown that this MOF-modified gel polymer electrolyte has a higher ionic conductivity compared to other PVDF-based polymer electrolytes (approximate range of 2 × 10-4 to 3 × 10-3 S cm-1), with a very high conductivity (1.63 mS cm-1) even at -20 °C. The Zn/Zn symmetric cell could maintain operation for more than 3600 h at a current density of 1 mA cm-2, and SEM showed that the MOF-modified gel electrolyte had uniform Zn2+ deposition.

Stabilizing Zn anode for high-performance Zn-Ni battery through a complexing agent electrolyte addition

Zn-Ni batteries have garnered considerable attention due to their high specific energy, consistent discharge voltage, favorable performance at low temperatures, and environmentally benign nature. Nevertheless, anode interface issues such as dendrite growth, hydrogen evolution, and interfacial side reactions lead to poor cycling stability of Zn-Ni batteries, significantly limiting their further commercial applications. In this study, we propose a facile electrolyte engineering strategy to optimize the Zn anode interfacial environment and stabilize the Zn anode by introducing tannic acid (TA) into the KOH electrolyte. The incorporated TA complexing agent addition will be used to prevent the direct contact of H2O with the anode surface and promote the desolvation of Zn2+ through complexation, thus suppressing the interfacial corrosion. Consequently, the Zn symmetric battery using TA electrolyte cycles stably for 178 h at 1 mA cm-2. The Zn-Ni full batteries with TA electrolyte maintain 98.08 % capacity retention after 2000 cycles at 20C. This study will be of immediate benefit in commercializing large-scale, practical energy storage applications.

Engineering Low-Cost Organic Cathode for Aqueous Rechargeable Battery and Demonstrating the Proton Intercalation Mechanism for Pyrazine Energy Storage Unit

Seeking organic cathode materials with low cost and long cycle life that can be employed for large-scale energy storage remains a significant challenge. This work has synthesized an organic compound, triphenazino[2,3-b](1,4,5,8,9,12-hexaazatriphenylene) (TPHATP), with as high as 87.16% yield. This compound has a highly π-conjugated and rigid molecular structure, which is synthesized by capping hexaketocyclohexane with three molecules of 2,3-diaminophenazine derived from low-cost o-phenylenediamine, and is used as a cathode material for assembling aqueous rechargeable zinc ion batteries. Both experiments and DFT calculations demonstrate that the redox mechanism of TPHATP is predominantly governed by H+ storage. The Zn-intercalation product of nitride-type compound, is too unstable to form in water. Moreover, the TPHATP cathode exhibits a capacity of as high as 318.3 mAh g-1 at 0.1 A g-1, and maintained a stable capacity of 111.9 mAh g-1 at a large current density of 10 A g-1 for 5000 cycles with only a decay of 0.000512% per cycle. This study provides new insights into understanding pyrazine as an active redox group and offers a potential affordable aqueous battery system for grid-scale energy storage.

Constructing Highly Stable Zinc Metal Anodes via Induced Zn(002) Growth

The nonuniform electric field at the surface of a zinc (Zn) anode, coupled with water-induced parasitic reactions, exacerbates the growth of Zn dendrites, presenting a significant impediment to large-scale energy storage in aqueous Zn-ion batteries. One of the most convenient strategies for mitigating dendrite-related issues involves controlling crystal growth through electrolyte additives. Herein, we present thiamine hydrochloride (THC) as an electrolyte additive capable of effectively stabilizing the preferential deposition of the Zn(002) plane. First-principles calculations reveal that THC tends to adsorb on Zn(100) and Zn(101) planes and is capable of inducing the deposition of Zn ion onto the (002) plane and the preferential growth of the (002) plane, resulting in a flat and compact deposition layer. A THC additive not only effectively suppresses dendrite growth but also prevents the generation of side reactions and hydrogen evolution reaction. Consequently, the Zn||Zn symmetric battery exhibits long-term cycling stability of over 3000 h at 1 mA cm-2/1 mAh cm-2 and 1000 h at 10 mA cm-2/10 mAh cm-2. Furthermore, the NH4V4O10||Zn full battery also displays excellent cycling stability and a high reversible capacity of 210 mAh g-1 after 1000 cycles at 1 A g-1, highlighting a significant potential for practical applications.

Manganese-Based Oxide Cathode Materials for Aqueous Zinc-Ion Batteries: Materials, Mechanism, Challenges, and Strategies

Aqueous zinc-ion batteries (AZIBs) have recently attracted worldwide attention due to the natural abundance of Zn, low cost, high safety, and environmental benignity. Up to the present, several kinds of cathode materials have been employed for aqueous zinc-ion batteries, including manganese-based, vanadium-based, organic electrode materials, Prussian Blues, and their analogues, etc. Among all the cathode materials, manganese (Mn)-based oxide cathode materials possess the advantages of low cost, high theoretical specific capacity, and abundance of reserves, making them the most promising cathode materials for commercialization. However, several critical issues, including intrinsically poor conductivity, sluggish diffusion kinetics of Zn2+, Jahn-Teller effect, and Mn dissolution, hinder their practical applications. This Review provides an overview of the development history, research status, and scientific challenges of manganese-based oxide cathode materials for aqueous zinc-ion batteries. In addition, the failure mechanisms of manganese-based oxide materials are also discussed. To address the issues facing manganese-based oxide cathode materials, various strategies, including pre-intercalation, defect engineering, interface modification, morphology regulation, electrolyte optimization, composite construction, and activation of dissolution/deposition mechanism, are summarized. Finally, based on the analysis above, we provide future guidelines for designing Mn-based oxide cathode materials for aqueous zinc-ion batteries.

Zn-induced formation of polymetallic carbonate hydroxide cathodes with high mass loading for high performance aqueous alkaline Zn-based batteries

Developing high mass loading cathodes with high capacity and durable life cycles is greatly worthwhile and challenging for alkaline aqueous rechargeable Zn-based batteries (AAZBs). Herein, we demonstrate an efficient zinc-induced strategy to rationally develop Zn-Ni-Co carbonate hydroxides/hydroxides heterostructure nanosheet array with an extremely high mass loading of 9.2 mg cm-2 on Ni foam (ZNC/NF) as such a superior cathode for AAZBs. It is discovered that Ni-Co hydroxide nanowires can be transformed into Zn-Ni-Co carbonate hydroxides/hydroxides heterostructure nanosheet with rich defect structures after the introduction of Zn during the synthetic process. The formed heterostructures and rich defect structures can enhance ion and electron transfer efficiency, thus ensuring the excellent electrochemical performance under high loading condition. Consequently, the ZNC/NF//Zn battery shows an outstanding areal capacity of 2.1 mAh cm-2 at 5 mA cm-2, with an ultrahigh energy density of 3.6 mWh cm-2. Moreover, the battery can still retain a high capacity of 0.42 mAh cm-2 after 5000 cycles at 50 mA cm-2, suggesting strong long-term cycling stability. This research enables pave the way for the rational design and manufacture of advanced electrode materials with large mass loadings.

A carbonyl-rich conjugated organic compound for aqueous rechargeable Na+ storage with wide voltage window workability

Organic compounds have become an important electrode material for aqueous electrochemical energy storage. However, organic electrodes still face poor performance in aqueous batteries due to insufficient electrochemical activity. In this work, a novel conjugated quinone compound containing a rich carbonyl group was designed. The quinone compound was synthesized by a simple dehydration reaction of pyrene-4,5,9,10-tetrone (PTO) and 1,2-diaminoanthraquinone (1,2-AQ); it contains 4 pyrazines (CN) from AQ and 4 carbonyl groups (CO), as well as a large number of active sites and the excellent conductivity brought by its conjugated structure ensures the high theoretical capacity of PTO-AQ. In the context of aqueous sodium ion batteries (ASIBs), the electrode material known as PTO-AQ exhibits a notable reversible discharge capacity of 117.9 mAh/g when subjected to a current density of 1 A/g; impressively, it maintained a capacity retention rate of 74.3 % even after undergoing 500 charge and discharge cycles, a performance significantly surpassing that of pristine PTO and AQ. Notably, PTO-AQ exhibits a wide operating voltage range (-1.0-0.5 V) and a cycle life of up to 10,000 cycles. In situ Raman and ex situ measurements were used to analyze the structural changes of PTO-AQ during charge and discharge and the energy storage mechanism in NaAC. The effective promotion of Na+ storage brought by a rich carbonyl group was obtained. The structural energy level and electrostatic potential of PTO-AQ were calculated, and the active center distribution of PTO-AQ was obtained. This work serves as a guide for designing high-performance aqueous organic electrode materials that operate across a wide voltage range while also explaining their energy storage mechanism.

Stabilizing Anode-Electrolyte Interface for Dendrite-Free Zn-Ion Batteries Through Orientational Plating with Zinc Aspartate Additive

The stability of aqueous Zn-ion batteries (AZIBs) is detrimentally influenced by the formation of Zn dendrites and the occurrence of parasitic side reactions at the Zn metal anode (ZMA)-electrolyte interface. The strategic manipulation of the preferential crystal orientation during Zn2+ plating serves as an essential approach to mitigate this issue. Here, Zn aspartate (Zn-Asp), an electrolyte additive for AZIBs, is introduced not only to optimize the solvation structure of Zn2+ , but also to crucially promote preferential Zn2+ plating on the (002) crystal plane of ZMA. As a result, both side reactions and Zn dendrites are effectively inhibited, ensuring an anode surface free of both dendrites and by-products. The implementation of Zn-Asp leads to significant enhancements in both Zn||Zn symmetric and Zn||Ti batteries, which demonstrate robust cyclability of over 3200 h and high Coulombic efficiency of 99.29%, respectively. Additionally, the Zn||NaV3 O8 ·1.5H2 O full battery exhibits remarkable rate capability, realizing a high capacity of 240.77 mA h g-1 at 5 A g-1 , and retains 92.7% of its initial capacity after 1000 cycles. This research underscores the vital role of electrolyte additives in regulating the preferential crystal orientation of ZMA, thereby contributing to the development of high-performing AZIBs.

Vanadate-Based Fibrous Electrode Materials for High Performance Aqueous Zinc Ion Batteries

Aqueous zinc-ion batteries (AZIBs) are considered as attractive energy storage systems with great promise owing to their low cost, environmental friendliness and high safety. Nevertheless, cathode materials with stable structure and rapid diffusion of zinc ions are in great demand for AZIBs. In this work, a new kind of potassium vanadate compound (KV3 O8 ) is synthesized with fibrous morphology as an excellent cathode material for AZIBs, which shows outstanding electrochemical performance. KV3 O8 exhibits a high discharge capacity of 556.4 mAh g-1 at 0.8 A g-1 , and the capacity retention is 81.3% at 6 A g-1 even after a long cycle life of 5000 cycles. The excellent performance of the KV3 O8 cathode is benefited from the structural stability, sufficient active sites, and high conductivity, which is revealed by in situ X-ray diffraction and various other characterizations. This work offers a new design strategy into fabricating high efficiency cathode materials for AZIBs and beyond.

Theoretical investigation of electronic, energetic, and mechanical properties of polyvinyl alcohol/cellulose composite hydrogel electrolyte

Hydrogels are a new class of electrolytic materials employed in zinc-air batteries due to their significant on the battery's performance. However, the effectiveness of electrolytic hydrogel is affected by factors such as water content, temperature, additives, etc. Using DMol3 and molecular dynamics modeling techniques, this research aimed at investigating the electronic properties, effect of water content, and temperature on the binding energy, cohesive energy, and the mechanical properties of polyvinyl alcohol/cellulose-based composite hydrogel at the molecular level. The electronic optimized structures of the polymeric materials and parameters such as frontier molecular orbitals, band gap and electron density were analyzed. The results revealed that the binding energies of hydrogel polymer composite increased as the number of water molecules in the composite increased up to 60 % after which the binding energy decreased. In addition, the temperature increase led to a decrease in the binding energy of the composite. The cohesive energy density of the composite was highest at 40 % water content while higher temperatures decreased the cohesive energy density of the hydrogel. As the number of water molecules increased from 29 to 256, the tensile modulus increased from 0.707 × 10-3 to 2.821 × 10-3 Gpa; while the bulk modulus (K) increased in the order of K 40 > 50 > 30 > 20 > 10 respectively. These results serve as a theoretical enlightenment and a guide for experimental works in the field of energy conversion and storage devices.

Regulating Crystal Orientation in VO2 for Aqueous Zinc Batteries with Enhanced Pseudocapacitance

Although aqueous zinc batteries have attracted extensive interest, they are limited by relatively low rate capabilities and poor cyclic stability of cathodes. The crystal orientation of the cathode is one important factor influencing electrochemical properties. However, it has rarely been investigated. Herein, VO2 cathodes with different crystal orientations are developed via tuning the number of hydroxyl groups in polyol, such as using glycerol, erythritol, xylitol, or mannitol. The polyols serve as a reductant as well as a structure-directing agent through a hydrothermal reaction. Xylitol-derived VO2 shows a (110)-orientated crystalline structure and ultrathin nanosheet morphology. Such features greatly enhance the pseudocapacitance to 76.1% at a scan rate of 1.0 mV s-1, which is significantly larger than that (61.6%) of the (001)-oriented VO2 derived from glycerol. The corresponding aqueous zinc batteries exhibit a high energy storage performance with a reversible specific capacity of 317 mAh g-1 at 0.5 A g-1, rate ability of 220 mAh g-1 at 10 A g-1, and capacity retention of 81.0% at 10 A g-1 over 2000 cycles. This work demonstrates a facile method for tailoring VO2 crystal orientations, offers an understanding of the Zn2+ storage mechanism upon different VO2 facets, and provides a novel method to develop cathode materials toward advanced aqueous zinc batteries.

Versatile MXenes for Aqueous Zinc Batteries

Aqueous zinc-ion batteries (AZIBs) are gaining popularity for their cost-effectiveness, safety, and utilization of abundant resources. MXenes, which possess outstanding conductivity, controllable surface chemistry, and structural adaptability, are widely recognized as a highly versatile platform for AZIBs. MXenes offer a unique set of functions for AZIBs, yet their significance has not been systematically recognized and summarized. This review article provides an up-to-date overview of MXenes-based electrode materials for AZIBs, with a focus on the unique functions of MXenes in these materials. The discussion starts with MXenes and their derivatives on the cathode side, where they serve as a 2D conductive substrate, 3D framework, flexible support, and coating layer. MXenes can act as both the active material and a precursor to the active material in the cathode. On the anode side, the functions of MXenes include active material host, zinc metal surface protection, electrolyte additive, and separator modification. The review also highlights technical challenges and key hurdles that MXenes currently face in AZIBs.

Low-Temperature and High-Performance Vanadium-Based Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries have attracted attention due to their low cost and high safety. Unfortunately, dendrite growth, hydrogen evolution reactions, cathodic dissolution, and other problems are more serious; not only that, but also the cathodic and anodic materials' lattices contract when the temperature drops, and charge transfer and solid phase diffusion become slow, seriously aggravating dendrite growth. At present, there are few studies on the low-temperature system, and studies on retaining high specific capacity are even more rare. Herein, ethylene glycol (EG) and manganese sulfate (MSO) are selected as additives, and the manganese vanadate (MVO) cathode is used to find a high-performance solution at low temperature. MVO can provide higher specific capacity and better structural stability than MnO2 to adapt to a low-temperature environment. At the same time, Mn2+ in MSO can produce a cationic shield covering the initial zinc tip at an appropriate concentration to avoid the tip effect and inhibit the dissolution of MVO. EG can not only reduce the freezing point of the electrolyte but also promote the desolvation of [Zn(H2O)6]2+. The synergistic effect of the three elements prevents the dissolution equilibrium of Mn2+ in MVO from fluctuating greatly due to the change of temperature. Therefore, when we use EG@0.2 M MnSO4 + 2 M ZnSO4 (EG + 0.2Mn/2ZSO) electrolyte at -30 °C, the Zn||Zn batteries which used this type of electrolyte can remain 350 h at 1 mA cm-2 without failure. The Zn||Cu batteries can retain 100% Coulombic efficiency after more than 2000 cycles at 0.2 mA cm-2. The Zn||MVO battery can reach 231.13 mA h g-1 at its first cycle, and the capacity retention rate is still above 85% after 1000 cycles, which is higher than that of the existing low-temperature research system.

Multi-Ion Engineering Strategies toward High Performance Aqueous Zinc-Based Batteries

As alternatives to batteries with organic electrolytes, aqueous zinc-based batteries (AZBs) have been intensively studied. However, the sluggish kinetics, side reactions, structural collapse, and dissolution of the cathode severely compromise the commercialization of AZBs. Among various strategies to accelerate their practical applications, multi-ion engineering shows great feasibility to maintain the original structure of the cathode and provide sufficient energy density for high-performance AZBs. Though multi-ion engineering strategies could solve most of the problems encountered by AZBs and show great potential in achieving practical AZBs, the comprehensive summaries of the batteries undergo electrochemical reactions involving more than one charge carrier is still in deficiency. The ambiguous nomenclature and classification are becoming the fountainhead of confusion and chaos. In this circumstance, this review overviews all the battery configurations and the corresponding reaction mechanisms are investigated in the multi-ion engineering of aqueous zinc-based batteries. By combing through all the reported works, this is the first to nomenclate the different configurations according to the reaction mechanisms of the additional ions, laying the foundation for future unified discussions. The performance enhancement, fundamental challenges, and future developing direction of multi-ion strategies are accordingly proposed, aiming to further accelerate the pace to achieve the commercialization of AZBs with high performance.

Construction of amorphous V2O5@Ti3C2Tx synergistic heterostructure on 3D carbon cloth substrate by a self-assembled strategy towards high-performance aqueous Zn-ion batteries

The emerging aqueous Zn-ion batteries (ZIBs) with their low price and inherent safety are showing strong competitiveness in the energy storage field. In this work, layer-by-layer stacked amorphous V2O5@Ti3C2Tx heterostructures anchored on three-dimensional carbon cloth (3D CC), synthesized by annealing process and subsequent in-situ electrochemical induction, are reported as high capacity and stable cathode for ZIBs. In this composite cathode, amorphous V2O5@Ti3C2Tx synergistic heterostructure provides isotropic Zn2+ migration channels and rapid electron transfer kinetics, while the 3D CC substrate can ensure that the bulk phase in the electrode material is also utilized to maximize the synergistic effect. As a result, the CC/a-V2O5@Ti3C2Tix cathode achieves a high specific capacity of 567 mAh/g at 0.1 A/g, a satisfactory rate performance of 213 mAh/g at 10 A/g, together with a long cycle life of 96.2 % capacity retention after 2000 cycles. Ex-situ characterizations show that the CC/a-V2O5@Ti3C2Tx cathode undergoes a highly reversible Zn2+/H+ co-intercalation/deintercalation mechanism during the discharge/charging process. In addition, based on the CC/a-V2O5@Ti3C2Tx cathode, the assembled flexible ZIB can operate properly under different bending degrees, showing its practicality in flexible devices. This work provides insight into the rational design of cathode materials with high Zn-storage performance.

Design Strategy of High Stability Vertically Aligned RGO@V2O5 Heterostructure Cathodes for Flexible Quasi-Solid-State Aqueous Zinc-Ion Batteries

Among various cathodes for aqueous zinc-ion batteries (AZIBs), vanadium-based oxides have garnered significant attention in research circles owing to their exceptionally high theoretical specific capacity. However, the outstanding zinc storage capacity of vanadium pentoxide is constrained by its irreversible dissolution in an aqueous solution. Here, we propose a laser reduction of graphene oxide and construct a heterostructure of V2O5 coated with vertically aligned reduced graphene oxide (VrGO). The VrGO nanosheets effectively suppress the dissolution of V2O5 and provide channels for the efficient transport of zinc ions and electrons, so the electrochemical reaction kinetics of the electrode are improved. The AZIB based on the VrGO@V2O5 heterostructure cathode has a high specific capacity of 254.9 mAh g-1 at 0.2 A g-1 and excellent cycle stability with a capacity retention rate of 90.1% after 5000 cycles of charge and discharge. When assembled into a flexible quasi-solid-state AZIB, the capacity of the device is reduced by only 2% after 1000 bending cycles, showing good potential for wearable applications. This work provides a reliable strategy for designing flexible AZIB with high electrochemical performance and structural stability.

Brønsted-Lowry Acid-Based Aqueous Eutectic Electrolyte for Practical Zinc Batteries

Aqueous highly concentrated electrolytes (AHCEs) have recently emerged as an innovative strategy to enhance the cycling stability of aqueous Zinc (Zn) batteries (AZB). Particularly, thanks to high Zn Chloride (ZnCl2 ) solubility in water, AHCEs based on ZnCl2 feature remarkable Zn anode stability. However, due to their inherently acidic pH and Cl- anion reactivity, these electrolytes face compatibility challenges with other battery components. Here, an aqueous eutectic electrolyte (AEE) based on Brønsted-Lowry concept is reported-allowing the usage of cheap and abundant salts, ZnCl2, and sodium acetate (NaAc). The reported, pH buffered, AEE displays a higher coordination of water at an even lower salt concentration, by simply balancing the acceptor-donor H─bonding. This results in impressive improvement of electrolyte properties such as high electrochemical stability, high transport properties and low glass transition temperature. The developed AEE displays higher compatibility with vanadium oxide-based cathode with a 50% increase in capacity retention in comparison to sat. ZnCl2 . More importantly, the pH buffered AEE solves the incompatibility issues of ZnCl2 toward commonly used aluminium (Al) current collector as well as cellulose separator. This work presents an efficient, simple, and low-cost strategy for the development of aqueous electrolytes for the practical application of Zn batteries.