Aliovalent-Ion-Induced Lattice Regulation Based on Charge Balance Theory: Advanced Fluorophosphate Cathode for Sodium-Ion Full Batteries

Boosting sodium-ion battery performance with binary metal-doped Na3V2(PO4)2F3 cathodes

Na3V2(PO4)2F3 (NVPF), recognized for its Na superionic conductor architecture, emerges as a promising candidate among polyanion-type cathodes for sodium ion batteries (SIBs). However, its adoption in practical applications faces obstacles due to its inherently low electronic conductivity. To address this challenge, we employ a binary co-doped strategy to design Na3.3K0.2V1.5Mg0.5(PO4)2F3 cathode with nitrogen-doped carbon (NC) coating layer. This configuration enhances electronic conductivity and reduces diffusion barriers for sodium ion (Na+). The strategy of incorporating nitrogen-doped carbon coating not only facilitates the formation of a porous structure but also introduces additional defects and active sites. Such modifications accelerate the reaction kinetics and augment electrolyte interaction through an expanded specific surface area, thus streamlining the electrochemical process. Concurrently, strategic heteroatom substitution leads to a more efficient engagement of Na+ in the electrochemical activities, thereby bolstering the cathode's structural integrity. The vanadium fluorophosphate Na3.3K0.2V1.5Mg0.5(PO4)2F3@NC exhibits an electrochemical performance, including a high discharge specific capacity of 124.3 mA h g-1 at 0.1C, a long lifespan of 1000 cycles with a capacity retention of 93.1 % at 10C, and a rate property of 73.2 mA h g-1 at 20C. This research provides a method for preparing binary doped NVPF for energy storage electrochemistry.

Emerging Chemistry for Wide-Temperature Sodium-Ion Batteries

The shortage of resources such as lithium and cobalt has promoted the development of novel battery systems with low cost, abundance, high performance, and efficient environmental adaptability. Due to the abundance and low cost of sodium, sodium-ion battery chemistry has drawn worldwide attention in energy storage systems. It is widely considered that wide-temperature tolerance sodium-ion batteries (WT-SIBs) can be rapidly developed due to their unique electrochemical and chemical properties. However, WT-SIBs, especially for their electrode materials and electrolyte systems, still face various challenges in harsh-temperature conditions. In this review, we focus on the achievements, failure mechanisms, fundamental chemistry, and scientific challenges of WT-SIBs. The insights of their design principles, current research, and safety issues are presented. Moreover, the possible future research directions on the battery materials for WT-SIBs are deeply discussed. Progress toward a comprehensive understanding of the emerging chemistry for WT-SIBs comprehensively discussed in this review will accelerate the practical applications of wide-temperature tolerance rechargeable batteries.

Unveil the origin of voltage oscillation for sodium-ion batteries operating at -40 °C

Voltage oscillation at subzero in sodium-ion batteries (SIBs) has been a common but overlooked scenario, almost yet to be understood. For example, the phenomenon seriously deteriorates the performance of Na3V2(PO4)3 (NVP) cathode in PC (propylene carbonate)/EC (ethylene carbonate)-based electrolyte at -20 °C. Here, the correlation between voltage oscillation, structural evolution, and electrolytes has been revealed based on theoretical calculations, in-/ex-situ techniques, and cross-experiments. It is found that the local phase transition of the Na3V2(PO4)3 (NVP) cathode in PC/EC-based electrolyte at -20 °C should be responsible for the oscillatory phenomenon. Furthermore, the low exchange current density originating from the high desolvation energy barrier in NVP-PC/EC system also aggravates the local phase transformation, resulting in severe voltage oscillation. By introducing the diglyme solvent with lower Na-solvent binding energy, the voltage oscillation of the NVP can be eliminated effectively at subzero. As a result, the high capacity retentions of 98.3% at -20 °C and 75.3% at -40 °C are achieved. The finding provides insight into the abnormal SIBs degradation and brings the voltage oscillation behavior of rechargeable batteries into the limelight.

Microwave-Assisted Hydrothermal Synthesis of Na3V2(PO4)2F3 Nanocuboid@Reduced Graphene Oxide as an Ultrahigh-Rate and Superlong-Lifespan Cathode for Fast-Charging Sodium-Ion Batteries

Na3V2(PO4)2F3 (NVPF) has been regarded as a favorable cathode for sodium-ion batteries (SIBs) due to its high voltage and stable structure. However, the limited electronic conductivity restricts its rate performance. NVPF@reduced graphene oxide (rGO) was synthesized by a facile microwave-assisted hydrothermal approach with subsequent calcination to shorten the hydrothermal time. NVPF nanocuboids with sizes of 50-150 nm distributed on rGO can be obtained, delivering excellent electrochemical performance such as a longevity life (a high capacity retention of 85.6% after 7000 cycles at 10 C) and distinguished rate capability (116 mAh g-1 at 50 C with a short discharging/charging time of 1.2 min). The full battery with a Cu2Se anode represents a capacity of 116 mAh g-1 at 0.2 A g-1. The introduction of rGO can augment the electronic conductivity and advance the Na+ diffusion speed, boosting the cycling and rate capability. Besides, the small lattice change (3.3%) and high structural reversibility during the phase transition process between Na3V2(PO4)2F3 and NaV2(PO4)2F3 testified by in situ X-ray diffraction are also advantageous for Na storage behavior. This work furnishes a simple method to synthesize polyanionic cathodes with ultrahigh rate and ultralong lifespan for fast-charging SIBs.

Metal-Organic Framework-Based Materials for Advanced Sodium Storage: Development and Anticipation

As a pioneering battery technology, even though sodium-ion batteries (SIBs) are safe, non-flammable, and capable of exhibiting better temperature endurance performance than lithium-ion batteries (LIBs), because of lower energy density and larger ionic size, they are not amicable for large-scale applications. Generally, the electrochemical storage performance of a secondary battery can be improved by monitoring the composition and morphology of electrode materials. Because more is the intricacy of a nanostructured composite electrode material, more electrochemical storage applications would be expected. Despite the conventional methods suitable for practical production, the synthesis of metal-organic frameworks (MOFs) would offer enormous opportunities for next-generation battery applications by delicately systematizing the structure and composition at the molecular level to store sodium ions with larger sizes compared with lithium ions. Here, the review comprehensively discusses the progress of nanostructured MOFs and their derivatives applied as negative and positive electrode materials for effective sodium storage in SIBs. The commercialization goal has prompted the development of MOFs and their derivatives as electrode materials, before which the synthesis and mechanism for MOF-based SIB electrodes with improved sodium storage performance are systematically discussed. Finally, the existing challenges, possible perspectives, and future opportunities will be anticipated.

Titanium Doping Induced the Suppression of Irreversible Phase Transformation at High Voltage for V-based Phosphate Cathodes of Na-Ion Batteries

Polyanionic material, specifically the NASICON-type material, is considered a promising cathode material for Na-ion batteries (SIBs) because of its stable structure and high operating voltage. Further, it improves the energy density correlated with the well utilization of all Na in the compound. For Na3 V2 (PO4 )2 F3 (NVPF), the extraction of the third Na, reported as the electrochemical inactivated, can be realized at a high voltage region while forming an irreversible tetragonal phase. In this study, we introduce Ti doping to the Na2 VTi(PO4 )2 F3 (NVTPF) material; we reveal that the Ti-doped NVTPF could effectively suppress the irreversible phase transformation, thus successfully harnessing Na in a wide voltage range. Experimental study discloses that the Ti-substituted Na2 VTi(PO4 )2 F3 could take up the Na+ from Amam phase to Cmc21 phase between 1.0 V and 4.8 V reversibly accounting for the 2 Na+ transportation that shows favorable Na+ kinetics and structural stability. Our research provides the strategy to stabilize the polyanion structure upon charging at a high voltage range and inspires the utilization of full sodium in the polyanionic materials, which could be considered as a material design for future conventional applications.

Engineering Crystal Growth and Surface Modification of Na3 V2 (PO4 )2 F3 Cathode for High-Energy-Density Sodium-Ion Batteries

Na₃ V₂ (PO₄ )₂ F₃ (NVPF) is a suitable cathode for sodium-ion batteries owing to its stable structure. However, the large radius of Na⁺ restricts diffusion kinetics during charging and discharging. Thus, in this study, a phosphomolybdic acid (PMA)-assisted hydrothermal method is proposed. In the hydrothermal process, the NVPF morphologies vary from bulk to cuboid with varying PMA contents. The optimal channel for accelerated Na⁺ transmission is obtained by cuboid NVPF. With nitrogen-doping of carbon, the conductivity of NVPF is further enhanced. Combined with crystal growth engineering and surface modification, the optimal nitrogen-doped carbon-covered NVPF cuboid (c-NVPF@NC) exhibits a high initial discharge capacity of 121 mAh g^-1 at 0.2 C. Coupled with a commercial hard carbon (CHC) anode, the c-NVPF@NC||CHC full battery delivers 118 mAh g^-1 at 0.2 C, thereby achieving a high energy density of 450 Wh kg^-1 . Therefore, this work provides a novel strategy for boosting electrochemical performance by crystal growth engineering and surface modification.

Mnx+ Substitution to Improve Na3V2(PO4)2F3-Based Electrodes for Sodium-Ion Battery Cathode

Na₃V₂(PO₄)₂F₃ (NVPF) is an extremely promising sodium storage cathode material for sodium-ion batteries because of its stable structure, wide electrochemical window, and excellent electrochemical properties. Nevertheless, the low ionic and electronic conductivity resulting from the insulated PO₄^3- structure limits its further development. In this work, the different valence states of Mn^x+ ions (x = 2, 3, 4) doped NVPF were synthesized by the hydrothermal method. A series of tests and characterizations reveals that the doping of Mn ions (Mn²⁺, Mn³⁺, Mn⁴⁺) changes the crystal structure and also affects the residual carbon content, which further influences the electrochemical properties of NVPF-based materials. The sodiation/desodiation mechanism was also investigated. Among them, the as-prepared NVPF doped with Mn²⁺ delivers a high reversible discharge capacity (116.2 mAh g^-1 at 0.2 C), and the capacity retention of 67.7% after 400 cycles at 1 C was obtained. Such excellent performance and facile modified methods will provide new design ideas for the development of secondary batteries.

An Advanced High-Entropy Fluorophosphate Cathode for Sodium-Ion Batteries with Increased Working Voltage and Energy Density

Impossible voltage plateau regulation for the cathode materials with fixed active elemental center is a pressing issue hindering the development of Na-superionic-conductor (NASICON)-type Na₃ V₂ (PO₄ )₂ F₃ (NVPF) cathodes in sodium-ion batteries (SIBs). Herein, a high-entropy substitution strategy, to alter the detailed crystal structure of NVPF without changing the central active V atom, is pioneeringly utilized, achieving simultaneous electronic conductivity enhancement and diffusion barrier reduction for Na⁺ , according to theoretical calculations. The as-prepared carbon-free high-entropy Na₃ V_1.9 (Ca,Mg,Al,Cr,Mn)_0.1 (PO₄ )₂ F₃ (HE-NVPF) cathode can deliver higher mean voltage of 3.81 V and more advantageous energy density up to 445.5 Wh kg^-1 , which is attributed by the diverse transition-metal elemental substitution in high-entropy crystalline. More importantly, high-entropy introduction can help realize disordered rearrangement of Na⁺ at Na(2) active sites, thereby to refrain from unfavorable discharging behaviors at low-voltage region, further lifting up the mean working voltage to realize a full Na-ion storage at the high voltage plateau. Coupling with a hard carbon (HC) anode, HE-NVPF//HC SIB full cells can deliver high specific energy density of 326.8 Wh kg^-1 at 5 C with the power density of 2178.9 W kg^-1 . This route means the unlikely potential regulation in NASICON-type crystal with unchangeable active center becomes possible, inspiring new ideas on elevating the mean working voltage for SIB cathodes.