Progress on the Photocatalytic Reduction Removal of Chromium Contamination

Glutaraldehyde-crosslinked magnetic chitosan nanocomposite for efficient Cr(VI) removal: A sustainable approach to aquatic remediation

Hexavalent chromium (Cr(VI)) is a highly toxic pollutant in aquatic environments, posing serious threats to ecosystems and human health. This study aims to develop an effective adsorbent for the removal of Cr(VI) from water. A novel magnetic chitosan-based nanocomposite (Fe₃O₄@MCS) was synthesized by in situ embedding of Fe₃O₄ nanoparticles into a chitosan matrix, crosslinked with glutaraldehyde, and further modified with ammonia via a Schiff base reaction. The material was thoroughly characterized using FTIR, XPS, XRD, SEM, TEM, EDX, and VSM. Adsorption experiments showed that Fe₃O₄@MCS achieved a maximum Cr(VI) uptake of 221.4 mg/g under optimal conditions (pH 4.0, 25 °C, 10 mg dosage, 120 min contact time), with 100 % removal efficiency at initial concentrations up to 50 ppm within just 15 min. The adsorption followed pseudo-second-order kinetics and fitted well with the Langmuir isotherm model (R2 = 0.999), indicating monolayer adsorption behavior. The removal mechanism involves electrostatic interactions between HCrO₄- and protonated amine/hydroxyl groups, followed by Cr(VI) reduction to Cr(III), as confirmed by FTIR and XPS analyses. Fe₃O₄@MCS also demonstrated excellent magnetic separability and reusability, maintaining over 90 % removal efficiency after five adsorption-desorption cycles. These findings highlight Fe₃O₄@MCS as a highly promising adsorbent for Cr(VI) remediation in water treatment applications.

Luminescent iron phthalocyanine organic polymer nanosheets with space-separated dual-active sites for the detection and photocatalytic reduction of Cr(Ⅵ) from wastewater

Cr(Ⅵ) residues in livestock and poultry wastewater are a rising concern for human health and biotic environments. For the removal of Cr(Ⅵ), its simultaneous reduction and adsorption represents a sustainable and efficient strategy. Herein, iron nodes on covalently bonded two-dimensional phthalocyanine organic polymer (PcOP-Fe) nanosheets with space-separated dual-active sites are developed for the simultaneous detection and removal of Cr(VI) from wastewater. In the FeN4 structure of PcOP-Fe nanosheets, Fe acts as an electron capture center, effectively facilitating the accumulation of photogenerated electrons and transferring them to Cr(VI), thereby achieving its photocatalytic reduction. Meanwhile, pyrrolic nitrogen provides excellent adsorption sites, enabling the adsorption of Cr(III) or Cr(0). Fe accumulates the photogenerated electrons from pyrrole N and transfer them to Cr(Ⅵ). The formation of N-Cr(Ⅲ) bonds causes a space-separation between Cr(Ⅵ) and Cr(III). In addition, PcOP-Fe can be used for a Cr(Ⅵ) detection agent. The photoluminescence intensity decreases linearly with increasing Cr(Ⅵ) concentration from 80 μM to 2 mM, with a limit of detection of 0.18 μM. The PcOP-Fe nanosheets exhibit good Cr(Ⅵ) detection and reduction performance in livestock and poultry wastewater, suggesting their suitability for practical sensing applications. Thus, the PcOP-Fe nanosheets with space-separated dual-active sites are promising for the simultaneous detection and removal of Cr(Ⅵ) in water treatment processes.

Development of a Novel Mixed-Metal-Organic Framework: An Innovative Photocatalyst for Simultaneous Cr(VI) Reduction and Phenol Degradation

The direct use of sunlight as an infinite source of energy for wastewater treatment is an overwhelming idea. For this aim, the development of novel and practical photocatalysts has been the main challenge of researchers. Among the different methodologies used, the introduction of multifunctional MOFs as photocatalysts shows a great deal of potential. Here, a simple and useful approach for the synthesis of rare mixed-valence, mixed-metal organic frameworks (MM-MOF) [Fe2CoO(TPBTM6)(H2O)3]n (Fe2CoMOF) [H6TPBTM: N,N',N″-Tris(isophthalyl)-1,3,5-benzenetricarboxamide] was investigated using a one-step hydrothermal approach. Applying mixed-metal clusters as preformed SBUs introduces multifunctionality into the MOF structure, leading to high performance in wastewater treatment. The coexistence of Fe3+ and Co2+ leads to super photocatalytic ability of the structure. Therefore, the catalytic activity of Fe2CoMOF was explored for concurrent photocatalytic Cr(VI) reduction and phenol degradation. For a better understanding of the cooperative reaction among Cr(VI) reduction and phenol oxidation, methodical tests were conducted to disclose the Cr(VI), phenol, and MOF functions in the photocatalytic procedures. The influence of the primary substrate concentration and pH on the reduction procedure was also examined empirically.

A timely update on g-C3N4-based photocatalysts towards the remediation of Cr(vi) in aqueous streams

Hexavalent chromium (Cr(vi)) is a prominent carcinogen. In environmental engineering, the elimination of hexavalent chromium from aqueous media is a noteworthy field of study. In this regard, nanoparticle science and technology have contributed significantly to the photocatalytic reduction of Cr(vi). In this review, a methodical search was undertaken to discover the most recent advancements in the field of photocatalytic reduction of Cr(vi) utilizing g-C3N4 and composites derived from it. This paper deals with the advancements and applications of g-C3N4 and its composites in the Cr(vi) remediation of water-borne pollutants. Different intriguing systems, suggested by various researcher groups, have been discussed. Different characterization techniques often conducted on photocatalysts based on g-C3N4 have also been highlighted so as to gain an understanding of the Cr(vi) removal process. Lastly, the future scope of the g-C3N4-derived photocatalysts, present challenges, and the viability of employing these photocatalysts in an extensive treatment plant have been discussed.

Electron beam synergetic removal of microplastics and hexavalent chromium: Synergetic removal process and mechanism

Microplastics are ubiquitous in the environment and aged microplastics are highly susceptible to absorbing pollutants from the environment. In this study, electron beam was innovatively used to treat PVC composite Cr(VI) pollutants (Composite contaminant formed by polyvinyl chloride microplastics with the heavy metal hexavalent chromium). Experiments showed that electron beam was able to achieve synergistic removal of PVC composite Cr(VI) pollutants compared to degrading the pollutants alone. During the electron beam removal of PVC composite Cr(VI) pollutants, the reduction efficiency of Cr(VI) increased from 57% to 92%, Cl- concentration increased from 3.52 to 12.41 mg L-1, and TOC concentration increased from 16.72 to 26.60 mg L-1. The research confirmed that electron beam can effectively promote the aging degradation of PVC, alter the physicochemical properties of microplastics, and generate oxygen-containing functional groups on the surface of microplastics. Aged microplastics enhanced the adsorption capacity for Cr(VI) through electrostatic and chelation interactions, and the adsorption process followed second-order kinetics and the Freundlich model. Theoretical calculations and experiments demonstrated that PVC consumed oxidizing free radical through dechlorination and decarboxylation processes, generating inorganic ions and small organic molecules. These inorganic ions and small organic molecules further reacted with oxidizing free radical to produce reducing free radicals, facilitating the reduction of Cr(VI). Cr(VI) continuously consumed the educing free radicals to transform into Cr (Ⅲ), enhancing the system oxidative atmosphere and promoting the oxidation degradation of PVC. This study investigated the formation and synergistic removal processes of PVC composite pollutants, offering new insights for controlling microplastics composite pollution.

Ag2O@UiO-66 new thin film as p-n heterojunction: permanent photoreduction of hexavalent Cr

The new nanosphere Ag2O@UiO-66 thin-film was synthesized on a stainless steel mesh surface via an electrophoretic deposition method, and is used as an effective and low-cost photocatalyst using visible light. The synthesized nanocomposite was used to perform photo-reduction of Cr(vi) ions under white light irradiation. The best removal rate (72% after 15 minutes) was obtained by the film with 0.034 grams of deposited composite having relative percentages of Ag2O : UiO-66 of 70 : 30. The interesting obtained results confirm that the p-n heterojunction of the composite is the main cause of the desired charge separation and the photoreduction speed increase. In the following, the resulting compounds were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), transmittance electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), energy diffraction X-ray spectroscopy (EDAX) and the Brunauer, Emmett, and Teller (BET) method. Scavenging studies performed in the presence of familiar scavengers confirmed that superoxide radicals (˙O2-) and dissolved oxygen gas have a significant role in the photocatalytic reduction process.

NiFe Layered Double Hydroxides with Controlled Composition and Morphology for the Efficient Removal of Cr(VI) from Water

A layered double hydroxide (LDH) composed of Ni2+ and Fe3+ with a Fe3+/(Ni2+ + Fe3+) ratio of 0.05, which is not commonly available, was successfully prepared by coprecipitation from an aqueous solution of glycerol containing nickel nitrate and iron nitrate. Precipitation using NaOH as a precipitating agent at room temperature or 120 °C under hydrothermal conditions gave products with micrometer-sized aggregates of nanometer-sized unshaped particles, while that using urea yielded LDHs with a foam-like porous architecture composed of platy particles with a size of 100-300 nm. The products were examined to remove Cr(VI) from an acidic (pH = 3) aqueous solution of K2Cr2O7 by adsorption and photocatalytic reduction. The foam-like porous NiFe-LDH exhibited the highest adsorbed amount (122 mg g-1) and rate (0.017 g mg-1 min-1) in the dark and the highest rate (0.012 min-1) of photocatalytic Cr(VI) reduction among the NiFe-LDHs prepared in the present study, which can be explained as a positive effect of the foam-like porous architecture. These performances were superior to those of other reported LDHs, showing the importance of the composition and the particle morphology to boost the removal of Cr(VI).

Aryl selenonium vs. aryl sulfonium counterions in polyoxometalate chemistry: the impact of Se+ cationic centers on the photocatalytic reduction of dichromate

A selenonium organic counter ion has been used in polyoxometalate chemistry to develop a new aryl selenonium polyoxometalate (POM) hybrid, and its photocatalytic properties have been explored in comparison with an aryl sulfonium POM-hybrid counterpart for the first time. The chalcogenonium counterions, namely, methyldiphenylsulfonium trifluoromethane sulfonate (MDPST) and methyldiphenylselenonium trifluoromethane sulfonate (MDPSeT), and their octamolybdate ([Mo8O26]4-) hybrids, 1 and 2, with the general formula (C13H13X)4[Mo8O26] (where X = S for 1 and Se for 2) were synthesized and characterized. Hybrids 1 and 2 vary in their chalcogenonium cationic center (S+vs. Se+), which enabled a direct comparison of their photocatalytic properties as a function of the cationic center. The photocatalytic activities of hybrids 1 and 2 were tested using the reduction of dichromate (Cr2O72-) as a model reaction under UV irradiation. A 99% photocatalytic reduction of Cr2O72- with a rate constant of 0.0305 min-1 was achieved with hybrid 2, while only a 67% reduction with a rate constant of 0.0062 min-1 was observed with hybrid 1 in 180 minutes. The better catalytic performance of hybrid 2 may be correlated to the larger atomic radii of Se than S, which helps in better stabilizing the photogenerated electron-hole (e--h+) pair on the POM cluster by polarizing its lone pair more efficiently compared to S. The catalytic recyclability was tested for up to 4 cycles using hybrid 2, and up to 98% reduction was obtained even after the 4th cycle. Recyclability tests and control experiments also indicated the generation of some elemental Se through possible cleavage of some C-Se bonds of MDPSe under prolonged UV exposure during catalysis, and the Se thus generated was found to contribute to the catalytic reduction of dichromate. This study, therefore, opens new avenues for aryl selenonium moieties and their POM hybrids for potential catalytic applications.

Nanolayered Structures and Nanohybrids Based on a Ternary System Co/Ti/Zn for Production of Photo-Active Nanocomposites and Purification of Water Using Light

Water pollution has emerged as a major challenge for the scientific community because of the rapid expansion of the population and the industrial sector in the world. The current study focuses on introducing a new track for designing new optical nanocomposites for purifying water in addition to providing a new additive for building new nanohybrids. These targets were achieved through building a ternary system of Co/Ti/Zn nanocomposites and nanolayered structures. The Co/Ti/Zn nanolayered structures were prepared and intercalated by different kinds of organic acids: monocarboxylic and dicarboxylic acids. Long chains of organic acids were used to construct series of organic-inorganic nanohybrids. X-ray diffraction, thermal analyses, Fourier Transform Infrared spectroscopy, and scanning electron microscopy confirmed the formation of nanolayered structures and nanohybrids. The optical properties of the nanolayered structure showed that the Co/Ti/Zn LDH became photo-active compared with the usual Al/Zn LDH because of the reduction in the band gap energy from 5.3 eV to 3.3 eV. After thermal treatment, a highly photo-active nanocomposite was produced through observing more reduction for the band gap energy to become 2.8 eV. In addition, the dye of Acid Green 1 completely decomposed and converted to water and carbon dioxide during 17 min of UV radiation by the dual Co/Ti-doped zinc oxide nanocomposite. In addition, the kinetic study confirmed that the high optical activity of the dual Co/Ti-doped zinc oxide nanocomposite accelerated the degradation of the green dyes. Finally, from these results it could be concluded that designing effective nanocomposite for purification of water was accomplished through converting 2D nanolayered structures to a 3D porous structure of Ni/Ti/Zn nanocomposites. In addition, a new additive was achieved for heterostructured hybrids through building new Co/Ti/Zn/organic nanohybrids.

Comprehensive Insights into the Family of Atomically Thin 2D-Materials for Diverse Photocatalytic Applications

2D materials with their fascinating physiochemical, structural, and electronic properties have attracted researchers and have been used for a variety of applications such as electrocatalysis, photocatalysis, energy storage, magnetoresistance, and sensing. In recent times, 2D materials have gained great momentum in the spectrum of photocatalytic applications such as pollutant degradation, water splitting, CO2 reduction, NH3 production, microbial disinfection, and heavy metal reduction, thanks to their superior properties including visible light responsive band gap, improved charge separation and electron mobility, suppressed charge recombination and high surface reactive sites, and thus enhance the photocatalytic properties rationally as compared to 3D and other low-dimensional materials. In this context, this review spot-lights the family of various 2D materials, their properties and their 2D structure-induced photocatalytic mechanisms while giving an overview on their synthesis methods along with a detailed discussion on their diverse photocatalytic applications. Furthermore, the challenges and the future opportunities are also presented related to the future developments and advancements of 2D materials for the large-scale real-time photocatalytic applications.

Renaissance of elemental phosphorus materials: properties, synthesis, and applications in sustainable energy and environment

The polymorphism of phosphorus-based materials has garnered much research interest, and the variable chemical bonding structures give rise to a variety of micro and nanostructures. Among the different types of materials containing phosphorus, elemental phosphorus materials (EPMs) constitute the foundation for the synthesis of related compounds. EPMs are experiencing a renaissance in the post-graphene era, thanks to recent advancements in the scaling-down of black phosphorus, amorphous red phosphorus, violet phosphorus, and fibrous phosphorus and consequently, diverse classes of low-dimensional sheets, ribbons, and dots of EPMs with intriguing properties have been produced. The nanostructured EPMs featuring tunable bandgaps, moderate carrier mobility, and excellent optical absorption have shown great potential in energy conversion, energy storage, and environmental remediation. It is thus important to have a good understanding of the differences and interrelationships among diverse EPMs, their intrinsic physical and chemical properties, the synthesis of specific structures, and the selection of suitable nanostructures of EPMs for particular applications. In this comprehensive review, we aim to provide an in-depth analysis and discussion of the fundamental physicochemical properties, synthesis, and applications of EPMs in the areas of energy conversion, energy storage, and environmental remediation. Our evaluations are based on recent literature on well-established phosphorus allotropes and theoretical predictions of new EPMs. The objective of this review is to enhance our comprehension of the characteristics of EPMs, keep abreast of recent advances, and provide guidance for future research of EPMs in the fields of chemistry and materials science.

Study on Photochemical Properties of a Sr-SnS2/CaIn2S4 Heterostructure to Improve Cr(VI) Removal

Compound semiconductor photocatalysis technology is considered to be a promising treatment for solving water problems efficiently. The point of designing high-efficiency catalysts is to optimize the band gap structure and facilitate the separation of charge carriers by establishing new electron migration pathways. Recently, 3D porous CaIn2S4 was found to have good photocatalytic ability. However, the quick recombination and agglomeration of carriers still limit its application. Herein, we prepared a heterostructure by introducing 2D Sr-doped SnS2 to 3D CaIn2S4 by a hydrothermal synthesis method. The optimal dosage of Sr-SnS2 is 3%, and the photocatalytic Cr(VI) removal efficiency of 3% Sr-SnS2/CaIn2S4 (SSCS-3) is 5.82 and 10.83 times those of pure CaIn2S4 and SnS2, respectively. According to the results of characterization tests and calculation verification, we inferred that the enhanced photocatalytic removal of Cr(VI) is due to the introduction of Sr-SnS2 that can promote the rapid transfer of photogenerated electrons to the surface of CaIn2S4, and the heterostructure formed between 2D Sr-SnS2 and 3D CaIn2S4 can also provide abundant reaction sites. The promotion of carrier separation is mainly due to the formation of a built-in electric field of the Sr-SnS2/CaIn2S4 heterostructure. This work provides new ideas and technologies for the treatment of Cr(VI) in wastewater.

Advanced Photocatalytic Uranium Extraction Strategies: Progress, Challenges, and Prospects

Nuclear energy with low carbon emission and high-energy density is considered as one of the most promising future energy sources for human beings. However, the use of nuclear energy will inevitably lead to the discharge of nuclear waste and the consumption of uranium resources. Therefore, the development of simple, efficient, and economical uranium extraction methods is of great significance for the sustainable development of nuclear energy and the restoration of the ecological environment. Photocatalytic U(VI) extraction technology as a simple, highly efficient, and low-cost strategy, received increasing attention from researchers. In this review, the development background of photocatalytic U(VI) extraction and several photocatalytic U(VI) reduction mechanisms are briefly described and the identification methods of uranium species after photocatalytic reduction are addressed. Subsequently, the modification strategies of several catalysts used for U(VI) extraction are summarized and the advantages and disadvantages of photocatalytic U(VI) extraction are compared. Additionally, the research progress of photocatalytic technology for U(VI) extraction in actual uranium-containing wastewater and seawater are evaluated. Finally, the current challenges and the developments of photocatalytic U(VI) extraction technology in the future are prospected.

Degradation of aniline: sodium alginate/modified pomelo cellulose double cross-linking system as a bacterial immobilization carrier

Pectin cellulose grafted with glycidyltrimethylammoniochloride (GTMAC) was successfully obtained following the processes of depectinfibrillation and cellulose cationization using ordinary Shatian pomelo peel produced in Yongzhou, Hunan, as the raw material. This is the first report on a new type of functionalized sodium alginate-immobilized material prepared from the fibers of pomelo peel. The material was prepared by combining modified pomelo peel cellulose and sodium alginate following the processes of physical and chemical double cross-linking. The prepared material was used to embed the target bacteria to achieve the biodegradation of p-aniline. The concentration of CaCl₂ was adjusted when the alginate gelled, and the alginate to yuzu peel cellulose ratio was tuned. The immobilized material-embedded bacteria help achieve the best degradation effect. Bacteria are embedded during the process of the degradation of aniline wastewater, and the functionalization of the cellulose/sodium alginate-immobilized material results in unique surface structure performance. The performance of the prepared system is better than that of the single sodium alginate-based material characterized by a large surface area and good mechanical properties. The degradation efficiency of the system is improved significantly for the cellulose materials, and the prepared materials can potentially find applications in the field of bacteria-fixed technology.

MIL-101-NH2(Fe)-Coated Nylon Microfibers for Immobilized Photocatalysts in RhB and Cr(VI) Removal

MIL-101-NH₂(Fe) is one of the effective photocatalytic metal-organic frameworks (MOFs) working under visible light. However, its powder-type form inhibits reusability in practical applications. In this study, we immobilized MIL-101-NH₂(Fe) on a polymeric microfiber mesh to improve reusability while minimizing the loss of catalytic performance. To overcome the lack of surface functionality of the nylon fibers, an atomic layer deposition Al₂O₃ layer and NH₂-BDC linker were introduced to facilitate uniform coating of the MOF on the fiber surface. The reactions of the metal precursor to the nylon substrate and NH₂-BDC ligand of the MOF allow chemical bonding from the core to the shell of the entire hybrid catalytic materials. The resulting fiber-immobilized MOFs (Nylon@Al₂O₃@MOF) demonstrated high photocatalytic performance in the removal of RhB and Cr(VI) as representatives of organic dyes and heavy metals, respectively, while retaining over 85% of its efficiency after five cycles.

Photoreduction of Cr(VI) by TiO2 adsorbed gold nanoparticles and perylene as a novel organic-inorganic hybrid photocatalyst

The photoreduction of hexavalent chromium (Cr(VI)) using TiO₂ adsorbed gold nanoparticles and perylene (Au/Pe/TiO₂) as a novel organic-inorganic hybrid photocatalyst has been studied. The irradiation by a Xe lamp of a Cr (VI) aqueous solution (0.1 mM) with the Au/Pe/TiO₂ powder resulted in the reduction of the Cr(VI). The rate of Cr(VI) reduction reached 98.3% by the irradiation for 60 min. The reaction rate constant using Au/Pe/TiO₂ (0.0545 min^-1) was higher than that of TiO₂ (0.0218 min^-1), Pe/TiO₂ (0.0303 min^-1), or Au/TiO₂ (0.0393 min^-1). Gold nanoparticles and perylene synergistically accelerated the TiO₂ photocatalytic reaction. This result is due to the Z-scheme electron transfer between Pe and TiO₂ and the suppression of charge recombination by the gold nanoparticles. The irradiation of sunlight also led to the photocatalytic reduction of the Cr(VI) by Au/Pe/TiO₂. In addition, successive reduction of the Cr(VI) was achieved by using a column packed with the Au/Pe/TiO₂ powder immobilized by calcium alginate gel.

Stabilization and strengthening of chromium(VI)-contaminated soil via magnesium ascorbyl phosphate (MAP) and phytase addition

Cr(VI) contamination of soil threatens the environment and reduces soil strength. Therefore, both Cr(VI) stabilization and soil reinforcement should be considered in site remediation for future construction. This study investigated a biochemical treatment process using magnesium ascorbyl phosphate (MAP) and phytase. MAP was hydrolyzed via phytase catalysis to produce ascorbic acid (AA) and MgHPO₄·3H₂O precipitation. The AA reduced Cr(VI) into low-toxic Cr(III), which precipitated as Cr(OH)₃ and CrPO₄. More than 90% of the 500 mg/kg Cr(VI) in soil was reduced by 5% MAP (wt% of soil) and 1% phytase (vol/vol of soil water) doses at the geotechnically optimal soil moisture content of 16.8%. The MgHPO₄·3H₂O precipitates filled soil pores and enhanced the unconfined compression strength of treated soil by more than two times. This research reports a novel and practical enzymatically induced phosphate precipitation process for the remediation of Cr(VI)-contaminated soil.

Engineering sodium alginate-SiO2 composite beads for efficient removal of methylene blue from water

The lack of sufficient active binding sites in commonly reported sodium alginate (SA)-based porous beads hampers their performances in adsorption of water contaminants. To address this problem, porous SA-SiO₂ beads functionalized with poly(2-acrylamido-2-methylpropane sulfonic acid) (PAMPS) are reported in this work. Due to the porous properties and the existence of abundant sulfonate groups, the obtained composite material SA-SiO₂-PAMPS shows excellent adsorption capacity toward cationic dye methylene blue (MB). The adsorption kinetic and adsorption isotherm studies reveal that the adsorption process fits closely to pseudo-second-order kinetic model and Langmuir isotherm model, respectively, suggesting the existence of chemical adsorption and monolayer adsorption behavior. The maximum adsorption capacity obtained from Langmuir model is found to be 427.36, 495.05, and 564.97 mg/g under 25, 35, and 45 °C, respectively. The calculated thermodynamic parameters indicate that MB adsorption on SA-SiO₂-PAMPS is spontaneous and endothermic.

High-ratio {100} plane-exposed ZnO nanosheets with dual-active centers for simultaneous photocatalytic Cr(VI) reduction and Cr(III) adsorption from water

The development of an efficient catalyst for the simultaneous removal of Cr(VI) and Cr(III) from water is required to eliminate the risk of Cr(III) reconversion in the photocatalytic Cr(VI) reduction process. ZnO with large regions of high-energy {001} and {101} surfaces is often used to degrade various pollutants due to its high activity. However, the more readily available low-energy facets have relatively limited its applications. Here, we report a new strategy that employs a high proportion of {100} plane-exposed ZnO nanosheets for simultaneous photocatalytic Cr(VI) reduction and Cr(III) adsorption. The mechanism of Zn-O co-exposed on the {100} plane as the dual-active centers to jointly promote Cr(VI) reduction and Cr(III) adsorption was clarified at the atomic level. ZnO nanosheets with a high exposure ratio of the {100} plane achieve a total Cr removal rate of over 90% within 120 min under simulated sunlight irradiation, neutral conditions, and a negligible difference in the band structure.

Simultaneous treatment of chromium-containing wastewater and electricity generation using a plant cathode-sediment microbial fuel cell: investigation of associated mechanism and influencing factors

A novel plant cathode-sediment microbial fuel cell (P-SMFC) was constructed to treat Cr-containing wastewater, and the effects of the plants used, initial concentrations of Cr(VI) employed, and the external resistance on the treatment of wastewater and generation of electricity were investigated. The results showed that the system achieved the best performance when Acorus calamus was the cathode plant, the external resistance was 2000 Ω, and the initial Cr (VI) concentration of the overlying water of is 230 mg/L. A maximum power density of 40.16 mW/m² was reached, and Cr (VI) and COD removal efficiencies in the overlying water were 99.94% and 98.21%, respectively. The closed-circuit installation promoted the attachment of many microorganisms to the cathode, anode and sediment, increased species abundance, and reduced species diversity. The P-SMFC is inexpensive to construct, it consumes no energy, and it can generate bioelectricity; it thus has great application development value as a chromium-containing wastewater treatment method.

A novel insight into the microwave induced catalytic reduction mechanism in aqueous Cr(VI) removal over ZnFe2O4 catalyst

Aqueous Cr(VI) pollution is an emerging environmental issue. Herein, a sphere-like ZnFe₂O₄ catalyst with a size of ∼430 nm was prepared by a solvothermal method, by which the aqueous Cr(VI) in a 50 mL solution with concentration of 50 mg/L was completely removed after 10 min-microwave (MW) irradiation. "Surface temperature visualization" tests and COMSOL simulations showed that the surface temperature of the as-prepared ZnFe₂O₄ catalysts could be as high as > 1000 °C only after 300 s MW irradiation, and the work function calculations and scavenging experiments demonstrated that the excited electrons derived by the "hot spots" effect of the ZnFe₂O₄ catalysts reduced the Cr(VI) to Cr(III). Kinetic reaction process of the reduction of *Cr₂O₇^2- to *CrO₃H₃ over the ZnFe₂O₄ catalysts was clarified by using DFT calculation, and the results indicated that *Cr₂O₇^2- adsorbed on the Fe atoms was more easily to be reduced, and that Fe atoms played more significant roles than the Zn and O atoms in ZnFe₂O₄ catalysts. The present study not only proves that the MW induced ZnFe₂O₄ catalytic reduction was promising for ultrafast remediation of toxic Cr(VI), but also provides a new insight into the corresponding mechanism.

Conversion of novel tannery sludge-derived biochar/TiO2 nanocomposite for efficient removal of Cr (VI) under UV light: photocatalytic performance and mechanism insight

An investigation on the reduction of Cr (VI) pollutant from tannery effluents using TiO₂, SB/TiO₂, and c-SB/TiO₂ nano photocatalysts was presented in this study. For the preparation of Biochar-based TiO₂ photocatalyst (SB/TiO₂), tannery sludge was utilized as a precursor. Hydrothermal pre-treatment was adopted to prepare chemically activated SB/TiO₂ and SB/TiO₂ nanocomposites. The morphology, crystal structure, optical properties, and elemental composition of the prepared catalysts were analyzed by XRD, FT-IR, SEM-EDX, BET analysis, ZPC, PL, TGA, and Raman spectroscopy. The band gap analysis of Photocatalyst was measured using a DRS instrument, and band gap energy of 3.39 eV was obtained for c-SB/TiO₂ photocatalyst. The developed c-SB/TiO₂ catalyst exhibits a larger specific surface area of 646.85 m²/g than TiO₂ and SB/TiO₂ (74.58 m²/g and 573.74 m²/g), respectively. The enhanced photocatalytic activity for the pollutant removal was achieved by the photocatalyst due to their wide band gap and effective charge separation. The kinetic rate constant was achieved in the pseudo-first-order model, which fits well for the reduction of Cr (VI). Furthermore, at the optimal conditions of 10 mg/L contaminant concentration, pH 2, and 0.5 g/L catalyst dosage, 98.56% reduction was observed after 180 min of reaction. The OH acts as a major removal pathway for Cr (VI) contaminants with more than 50% reduction in COD. This study proves that c-SB/TiO₂ photocatalysts can remove toxic contaminants under UV light irradiation with good recycling performance up to 5 times.

Heavy Metal Removal from Aqueous Effluents by TiO2 and ZnO Nanomaterials

The presence of heavy metals in wastewater, such as Ni, Pb, Cd, V, Cr, and Cu, is a serious environmental problem. This kind of inorganic pollutant is not biodegradable for several years, and its harmful effect is cumulative. Recently, semiconductor nanomaterials based on metal oxides have gained interest due to their efficiency in the removal of heavy metals from contaminated water, by inducing photocatalytic ion reduction when they absorb light of the appropriate wavelength. The most commonly applied semiconductor oxides for these purposes are titanium oxide (TiO2), zinc oxide (ZnO), and binary nanomaterials composed of both types of oxides. The main purpose of this work is to critically analyse the existent literature concerning this topic focusing specially in the most important factors affecting the adsorption or photocatalytic capacities of this type of nanomaterials. In particular, photocatalytic activity is altered by various factors, such as proportion of polymorphs, synthesis method, surface area, concentration of defects and particle size, among others. After a survey of the actual literature, it was found that, although these metal oxides have low absorption capacity for visible light, it is possible to obtain an acceptable heavy metal reduction performance by sensitization with dyes, doping with metallic or nonmetallic atoms, introduction of defects, or the coupling of two or more semiconductors.

Structural Properties of Graphene Oxide Prepared from Graphite by Three Different Methods and the Effect on Removal of Cr(VI) from Aqueous Solution

Herein, three types of graphene oxides (GOs, GO-M1, GO-M2 and GO-M3) have been successfully prepared from graphite by three different methods and utilized for the removal of Cr(VI) from aqueous solutions. Further, the effects of initial concentration and pH, adsorbent dosage, contact time and temperature on the adsorption performance of GOs were investigated by batch adsorption experiments. Furthermore, the adsorption mechanisms for Cr(VI) adsorption by GOs are mainly the redox reaction and electrostatic attraction, while there are also pore filling, ion exchange and complexation involved in these adsorption processes. The adsorption kinetic and isotherm data indicate that these adsorption processes of GOs on Cr(VI) are dominantly monolayer chemisorption and equilibrium can be reached in 30 min. The saturation adsorption capacities (Qm, 298.15 K) of GO-M1, GO-M2 and GO-M3 for Cr(VI) are estimated to be 3.5412 mg⋅g-1, 2.3631 mg⋅g-1 and 7.0358 mg⋅g-1, respectively. Moreover, the adsorption thermodynamic study showed that these adsorption processes of Cr(VI) by the three types of GOs at 298.15 K to 323.15 K are endothermic, entropy-driven and thermodynamically spontaneous and feasible. Overall, these findings provided vital insights into the mechanism and application of Cr(VI) removal by GOs.

Photocatalytic reduction of Cr(VI) via surface modified g-C3N4 by acid-base regulation

Cr(VI) is a class of highly toxic heavy metals. In this study, alkali-modified g-C₃N₄ (cOH-CN) and acid-modified g-C₃N₄ (cH-CN) materials were successfully synthesized, and their photocatalytic activities for Cr(VI) reduction under visible light irradiation were tested. Owing to defect structures by cH-CN and -OH group introduction by cOH-CN, the modified materials exhibited a larger surface area, more abundant pore structures, a wider visible light absorption range, higher energy gap values, and a stronger capacity for electron-hole pair separation. As a result, satisfactory Cr(VI) reduction performance was gained by these two photocatalysts. Almost all Cr(VI) was converted to Cr(III) after 60 min of treatment in the presence of these two catalysts, while it was only 30% for the pristine g-C₃N₄ materials. Relatively higher dosages of cH-CN and cOH-CN and acidic conditions both improved Cr(VI) reduction in the cH-CN and cOH-CN photocatalytic systems. Cr(VI) reduction was mainly initiated by free electrons in the photocatalytic system of the modified materials. Finally, Cr(VI) in the photocatalytic system was almost completely converted to Cr(III). Furthermore, the stability and recycling of the cH-CN and cOH-CN catalysts were evaluated.

Proficient exclusion of pesticide using humic acid-modified magnetite nanoparticles from aqueous solution

Extensive dispersal of the pesticides to shield the different types of vegetation from pests has increased the production but at the same it has resulted in an increase in environmental pollution. Consequently, it is necessary to eliminate these undesired pollutants from the environment. The current investigation offers the synthesis of humic acid-coated magnetite nanoparticles towards effective removal of the most common insecticide, imidacloprid, from aqueous solution using a batch adsorption method. These synthesized nanoparticles were characterized with the help of several analytical and spectroscopic techniques. To acquire the maximum conceivable adsorption, effects of different influencing parameters like pH of the solution, time of contact, concentration of pesticide solution, amount of adsorbent and temperature were also examined. Moreover, the kinetic studies were found to be in good agreement with a pseudo-second-order kinetic model supporting the occurrence of chemisorption phenomenon. Additionally, isotherm modeling proved that the adsorption process was in accordance with the Langmuir model of isotherm. Thermodynamic parameters depicted the endothermic and spontaneous behavior of the adsorption process. Desorption studies were also carried out to examine the reusability of these nano-adsorbents. These verdicts confirmed that the surface modified magnetite nanoparticles may be treated as proficient material for exclusion of imidacloprid from the aqueous solution.

Facile synthesis of broom stick like FeOCl/g-C3N5 nanocomposite as novel Z-scheme photocatalysts for rapid degradation of pollutants

A simple and cost-effective route has been utilized for the preparation of a novel lamellar structured FeOCl/g-C₃N₅ nanocomposite as Z-scheme photocatalyst. The preparation method was performed under the ambient temperature conditions without any hazardous chemicals. Various characterization techniques, namely XRD, FESEM, TEM, FT-IR, UV-Vis, DRS, and PL were carried out to analyse the nanocomposite for confirmation of FeOCl/g-C₃N₅ nanocomposite. To evaluate its and visible light degradation performances tetracycline (T-C) was used as target pollutant. Among the optimum loading for the g-C₃N₅ incorporated FeOCl binary nanocomposites, the g-C₃N₅/FeOCl exhibited a superlative degradation performance toward the T-C antibiotic pollutant. The results confirmed that 95% of T-C was degraded within 40 min under photodegradation mechanism. The improved photodegradation performance in degradation of T-C was mainly due to the reduction in electron-hole recombination, broadening in the light absorption by g-C₃N₅ incorporation, which leads to shortening the degradation time. Furthermore, the hydroxyl and superoxide radicals played a major role in the photodegradation process and the possible mechanism was elucidated and proposed. The present work implies a novel, sustainable, and efficient Z-scheme system that may deliver a convenient method for environment remediation.

Novel S-scheme 2D/2D Bi4O5Br2 nanoplatelets/g-C3N5 heterojunctions with enhanced photocatalytic activity towards organic pollutants removal

Removal of organic pollutants and pharma products in waste water using semiconductor photocatalysts has gained huge interest among recent days. However, low visible light absorption, recombination rate of charge carriers and less availability of reaction sites are still major obstacles for the photocatalysis process. Herein, an in situ-forming Bi₄O₅Br₂ nanosheets decorated on the surface g-C₃N₅ were prepared via simple hydrothermal method under ambient temperature. The basic pH condition plays a vital role in growing for Bi₄O₅Br₂ nanosheets. Various characterization studies such as TEM, SEM, PL and UV-DRS studies confirmed the formation of close contact between the Bi₄O₅Br₂ and g-C₃N₅ nanosheets. The construction of Bi₄O₅Br₂ nanoplatelets/g-C₃N₅ nanocomposite increases the surface-active sites and improving the separation efficiencies of excitons, which is greatly influenced in the degradation of ciprofloxacin and bisphenol-A pollutants. Meanwhile, the flow of electrons from the layered structured graphite carbon of g-C₃N₅ which enables excellent electrical contact in the heterojunction. Besides, the main free radicals were determined as e^- and ^•O₂^-, and production level of free radicals were confirmed by radical trapping experiments. The possible degradation mechanism was proposed and discussed. Finally, this work provides a unique approach to in-situ preparation of heterojunction photocatalysts and demonstrates the prepared Bi₄O₅Br₂ nanoplatelets/g-C₃N₅ photocatalysts have great potential in the waste water management.

The synthesis of nanocellulose-based nanocomposites for the effective removal of hexavalent chromium ions from aqueous solution

The present study reports the synthesis of a polydopamine (PDA)/nanocellulose (NC) nanocomposite for the effective removal of chromium ions from water. PDA was used to modify NC surface producing a nanocomposite namely PDA/NC, by in situ polymerization of dopamine on the surface of NC. Thereafter, the as-synthesized nanocomposite was characterized using familiar techniques such as Fourier transform infrared, X-ray diffraction, X-ray photoelectron spectroscopy, ultraviolet-visible spectroscopy, and transmission electron microscopy. All results indicated the successful combination of PDA and NC in one nanocomposite. The PDA/NC nanocomposite was evaluated for the removal of hexavalent Cr(vi) ions from an aqueous solution. The adsorption conditions, such as pH, contact time, and initial Cr(vi) concentration, were optimized. Adsorption kinetic studies revealed that Cr(vi) removal on the surface of PDA/NC nanocomposite followed the pseudo-second-order kinetic model. Furthermore, isotherm studies revealed that Cr(vi) removal followed the Langmuir isotherm model with a maximum adsorption capacity (q m) of 210 mg/g. The adsorption mechanism study indicated that the Cr(vi) removal was reached via complexation, adsorption, and chemical reduction. The reusability of a PDA/NC nanocomposite for the removal of Cr(vi) ions was studied up to five cycles with acceptable results. The high adsorption capacity and multiple removal mechanisms validated the effective applicability of PDA/NC nanocomposite as a useful adsorbent for the removal of Cr(vi) ions from aqueous solution.

Electrospun Porous Nanofibers: Pore−Forming Mechanisms and Applications for Photocatalytic Degradation of Organic Pollutants in Wastewater

Electrospun porous nanofibers have large specific surface areas and abundant active centers, which can effectively improve the properties of nanofibers. In the field of photocatalysis, electrospun porous nanofibers can increase the contact area of loaded photocatalytic particles with light, shorten the electron transfer path, and improve photocatalytic activity. In this paper, the main pore−forming mechanisms of electrospun porous nanofiber are summarized as breath figures, phase separation (vapor−induced phase separation, non−solvent−induced phase separation, and thermally induced phase separation) and post−processing (selective removal). Then, the application of electrospun porous nanofiber loading photocatalytic particles in the degradation of pollutants (such as organic, inorganic, and bacteria) in water is introduced, and its future development prospected. Although porous structures are beneficial in improving the photocatalytic performance of nanofibers, they reduce their mechanical properties. Therefore, strategies for improving the mechanical properties of electrospun porous nanofibers are also briefly discussed.

Photocatalytic Reduction of Hexavalent Chromium Using Cu3.21Bi4.79S9/g-C3N4 Nanocomposite

The photocatalytic reduction of hexavalent chromium, Cr(VI), to the trivalent species, Cr(III), has continued to inspire the synthesis of novel photocatalysts that are capable of achieving the task of converting Cr(VI) to the less toxic and more useful species. In this study, a novel functionalized graphitic carbon nitride (Cu3.21Bi4.79S9/gC3N4) was synthesized and characterized by using X-ray diffraction (XRD), thermogravimetry analysis (TGA), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), transmission electron microscope (TEM), and scanning electron microscope (SEM). The composite was used for the photocatalytic reduction of hexavalent chromium, Cr(VI), under visible light irradiation. A 92.77% efficiency of the reduction was achieved at pH 2, using about 10 mg of the photocatalyst and 10 mg/L of the Cr(VI) solution. A pseudo-first-order kinetic study indicated 0.0076 min−1, 0.0286 min−1, and 0.0393 min−1 rate constants for the nanoparticles, pristine gC3N4, and the nanocomposite, respectively. This indicated an enhancement in the rate of reduction by the functionalized gC3N4 by 1.37- and 5.17-fold compared to the pristine gC3N4 and Cu3.21Bi4.79S9, respectively. A study of how the presence of other contaminants including dye (bisphenol A) and heavy-metal ions (Ag(I) and Pb(II)) in the system affects the photocatalytic process showed a reduction in the rate from 0.0393 min−1 to 0.0019 min−1 and 0.0039 min−1, respectively. Finally, the radical scavenging experiments showed that the main active species for the photocatalytic reduction of Cr(VI) are electrons (e−), hydroxyl radicals (·OH−), and superoxide (·O2−). This study shows the potential of functionalized gC3N4 as sustainable materials in the removal of hexavalent Cr from an aqueous solution.

Synthesis of a new magnetic Sulfacetamide-Ethylacetoacetate hydrazone-chitosan Schiff-base for Cr(VI) removal

In this study, a novel magnetic organic-inorganic composite was fabricated. Where, Chitosan, sulfacetamide and ethylacetoacetae were used to prepare a new Sulfacetamide-Ethylacetoacetate hydrazone-chitosan Schiff-base (SEH-CSB) with a variety of active sites that capable of forming coordinate covalent bonds with Cr(VI). This was followed by modification of the formed SHE-CSB with NiFe₂O₄ to obtain the magnetic Chitosan-Schiff-base (NiFe₂O₄@SEH-CSB). NiFe₂O₄@SEH-CSB was characterized using FTIR, zeta potential, SEM, VSM and XPS. Results clarified that SHE played a crucial role in the removal of Cr(VI). The removal of Cr(VI) on NiFe₂O₄@SEH-CSB was found to be more fitted to pseudo-2nd order kinetics model and Freundlich isotherm. Besides, the maximum adsorption capacity of NiFe₂O₄@SEH-CSB for Cr(VI) was found to be 373.61 mg/g. The plausible mechanism for the removal of Cr(VI) on NiFe₂O₄@SEH-CSB composite suggested coulombic interaction, outer-sphere complexation, ion-exchange, surface complexation and coordinate-covalent bond pathways. The magnetic property enabled easy recycling of NiFe₂O₄@SEH-CSB composite.

The state of the art review on photocatalytic Cr(VI) reduction over MOFs-based photocatalysts: From batch experiment to continuous operation

This state of the art review presented the photocatalytic reduction from highly toxic Cr(VI) to lowly toxic Cr(III) with metal-organic frameworks (MOFs) and their composites. The construction of composites facilitated the transportation of the photo-induced charges to enhance the Cr(VI) reduction, in which the corresponding mechanisms were clarified by both experimental tests and DFT calculations. The immobilized MOFs onto some substrates accomplished continuous operations toward Cr(VI) reduction even under real solar light. As well, the environmental applications of the Cr(VI) reduction were analyzed, in which the influence factors toward the Cr(VI) reduction were clarified. This review reported that a big breakthrough was achieved from the batch experiment to the continuous operation for Cr(VI) reduction, in which MOFs demonstrated a bright prospective in the field of photocatalytic Cr(VI) reduction.

Synthesis of novel CuNb2O6/g-C3N4 binary photocatalyst towards efficient visible light reduction of Cr (VI) and dyes degradation for environmental remediation

The further development of an efficient and sustainable water treatment requires the development of a very active and controllable photocatalyst. The heterojunction is a promising site where the activity of such a photocatalyst can be enhanced. Organic dyes have become a severe concern in recent years owing to their significant presence in wastewater. Hexavalent Chromium (Cr (VI)) is a potential carcinogen also exhibiting great persistence in wastewater. So, a low-waste, high-performance materials is required to eliminate organic dyes and Cr (VI) from wastewater. In this study, CNO/g-CN (CuNb₂O₆/g-C₃N₄) photocatalyst synthesized via co-precipitation, followed by calcination which were characterized using physiochemical and photo-electrochemical approaches to identify their structural, photochemical and optical traits. The uniqueness of the synthesized photocatalyst is due to both its efficient photo-reduction of Cr (VI) and photo-degradation of Rhodamine B (RhB), Methylene Blue (MB) and Methyl Orange (MO) under visible light. The CNO/g-CN composite with 30% CNO heterojunctions exhibited the highest photocatalytic activity with Cr (VI) 92.80% photoreduction and efficiency degradation for RhB, MB, MO of 99.6%, 98.50%, 99.0%, respectively, with constant rate (k). This efficient photocatalytic activity is attributed to the lower recombination rate of electron-hole pairs. Free radical trapping experiments showed that ^•O₂^- and h⁺ play an important role in the photodegradation. The study, therefore, opens an alternative route in the synthesis of very efficient binary photocatalysts for application in environmental remediation.

Killing Two Birds with One Stone: Biomineralized Bacteria Tolerate Adverse Environments and Absorb Hexavalent Chromium

Heavy metal ions in contaminated water, such as hexavalent chromium, are harmful to humans. Bacterial biosorption is an ideal method for the treatment of hexavalent chromium. However, hexavalent chromium in solution causes bacteria to produce reactive oxygen species, which leads to bacterial death and affects biosorption. We developed a microfluidics-based biomimetic mineralization method to encapsulate bacteria (e.g., Escherichia coli and Bacillus subtilis) with zeolitic imidazolate framework-8 (ZIF-8), thus allowing the bacteria to form a continuous and homogeneous shell. The artificial shells endowed bacteria with the ability to tolerate harsh environments, which was significant during the treatment of contaminated water. The adsorption of hexavalent chromium was a two-step process: first the fast physical adsorption of ZIF-8 and biosorption by bacteria (up to 30-50% adsorption in 1 day), followed by secondary biosorption after decomposition of the system. The maximum adsorption of hexavalent chromium by the encapsulated bacteria reached 90%. The microfluidic device developed in this study provides a simple method to encapsulate bacteria mildly and enable cell survival in extreme environments, offering the possibility of future microbial applications in environmental and other fields.

Efficient detoxification of Cr(VI)-containing effluents by sequential adsorption and reduction using a novel cysteine-doped PANi@faujasite composite: Experimental study supported by advanced statistical physics prediction

Nowadays, the global spreading of hazardous heavy metals becomes a top-priority environmental challenge, owing to its serious detrimental health outcomes. Herein, a novel cysteine-doped polyaniline@faujasite hybrid composite (Cys-PANi@FAU-50) was synthesized via a facile in-situ polymerization route for the effective detoxification of Cr(VI)-bearing wastewaters. The Cys-PANi@FAU-50 composite displayed an open mesoporous structure richly decorated with nitrogen/oxygen-containing functional groups, which consequently boosted the diffusion, adsorption and reduction of Cr(VI) oxyanions. The Cr(VI) adsorption behavior was satisfactorily tailored via pseudo-second-order law and Langmuir model with a maximum uptake capacity of 384.6 mg/g. Based on the advanced statistical physics theory, the monolayer model with two distinct receptor sites provided a reliable microscopic and macroscopic prediction of the Cr(VI) adsorption process. Stereographically, the Cr(VI) ions were adsorbed through horizontal multi-anchorage and vertical multi-molecular mechanisms on the amine and hydroxyl groups of Cys-PANi@FAU-50, respectively. The thermodynamic functions evidenced that the Cr(VI) adsorption was an endothermic spontaneous process. XPS analysis proved that Cr(VI) ions were electrostatically adsorbed, and subsequently reduced to Cr(III), which were in turn immobilized by chelation with imine/sulfonate groups and electrostatic interactions with carboxylate groups. The Cys-PANi@FAU-50 featured an effortless regenerability and good reusability. Overall, the Cys-PANi@FAU-50 composite owns outstanding potentiality for detoxifying Cr(VI)-laden effluents.

Room-temperature synthesis of Ag3PO4 nanoparticles with the assistance of trisodium citrate for photocatalytic dye degradation

The Ag3PO4 NPs had a high photocatalytic activity in MB degradation under visible-light illumination. The photocatalytic activity reduced by 4.4% after 5 cycles.

Heterogeneous ZnS-zinc carbonate hydroxide micro-belt for Cr(VI) reduction under simulated sunlight

Heterogeneous ZnS-zinc carbonate hydroxide (ZnS-ZCH) micro-belt was facilely synthesized and the composite belt displayed a dramatic enhancement for the response to the simulated sunlight, as indicated by a more than...

CdIn2S4/In(OH)3/NiCr-LDH Multi-Interface Heterostructure Photocatalyst for Enhanced Photocatalytic H2 Evolution and Cr(VI) Reduction

The development of highly active and stable photocatalysts, an effective way to remediate environment pollution and alleviate energy shortages, remains a challenging issue. In this work, a CdIn2S4/In(OH)3 nanocomposite was deposited in-situ on NiCr-LDH nanosheets by a simple hydrothermal method, and the obtained CdIn2S4/In(OH)3/NiCr-LDH heterostructure photocatalysts with multiple intimate-contact interfaces exhibited better photocatalytic activity. The photocatalytic H2 evolution rate of CdIn2S4/In(OH)3/NiCr-LDH increased to 10.9 and 58.7 times that of the counterparts CdIn2S4 and NiCr-LDH, respectively. Moreover, the photocatalytic removal efficiency of Cr(VI) increased from 6% for NiCr-LDH and 75% for CdIn2S4 to 97% for CdIn2S4/In(OH)3/NiCr-LDH. The enhanced photocatalytic performance was attributed to the formation of multi-interfaces with strong interfacial interactions and staggered band alignments, which offered multiple pathways for carrier migration, thus promoting the separation efficiency of photo-excited electrons and holes. This study demonstrates a facile method to fabricate inexpensive and efficient heterostructure photocatalysts for solving environmental problems.

Novel Technology for Vanadium and Chromium Extraction with KMnO4 in an Alkaline Medium

This paper focused on the oxidation-alkaline extraction process of vanadium-chromium-reducing residue. The affected parameters including reaction temperature, KMnO₄ dosage, reaction time, NaOH dosage, and liquid-to-solid ratio on the extraction process were investigated. The E-pH diagram and the thermodynamic analysis indicated that KMnO₄ was suitable for the oxidation of low-valence vanadium and chromium. Vanadium (97.24%) and chromium (56.20%) were extracted under the following optimal reaction conditions: reaction temperature of 90 °C, reaction time of 90 min, dosage of KMnO₄ at m(KMnO₄)/m(residue) = 0.40, dosage of NaOH at m(NaOH)/m(residue) = 0.30, and liquid-to-solid ratio at 5:1 mL/g. The extraction process of vanadium was controlled by the reactant through the solid product layer and the extraction kinetics behavior fitted well with the shrink core model with an E _a of 15.37 kJ/mol. At the same time, the surface chemical reaction was the controlling step for chromium extraction, which was difficult with an E _a of 39.78 kJ/mol.

Enabling simultaneous redox transformation of toxic chromium(VI) and arsenic(III) in aqueous media-A review

Simultaneous conversion of most harmful As(III) and Cr(VI) to their less toxic counterparts is environmentally desirable and cost-effective. It has been confirmed that simultaneous oxidation of As(III) to As(V) and reduction of Cr(VI) to Cr(III) can occur via free radical or mediated electron transfer processes. While Cr(VI) is reduced by reacting with H^•, e_aq^-, photoelectron directly or undergoing ligand exchange with H₂O₂ and SO₃^2-, As(III) is oxidized by HO^•, SO₄^•-, O₂^•-, and holes (h⁺) in free radical process. The ability to concentrate Cr and As species on heterogeneous interface and conductivity determining the co-conversion efficiency in mediated electron transfer process. Acidity has positive effect on these co-conversion, while mediated electron transfer process is not much affected by dissolved oxygen (O₂). Organic compounds (e.g., oxalate, citrate and phenol) commonly favor Cr(VI) reduction and inhibit As(III) oxidation. To better understand the trends in the existing data and to identify the knowledge gaps, this review elaborates the complicated mechanisms for co-conversion of As(III) and Cr(VI) by various methods. Some challenges and prospects in this active field are also briefly discussed.

State-of-the-art and prospects of Zn-containing layered double hydroxides (Zn-LDH)-based materials for photocatalytic water remediation

With the rapid worldwide development of industry and human activities, increasing amounts of multifarious contaminants have significantly threatened environmental ecosystems and human health. Solar photocatalytic decontamination, as an environmentally friendly technology, has been regarded as a good approach to eliminate water pollutants. To date, various photocatalysts have been developed for the purpose of water remediation. Zn-containing layered double hydroxides (Zn-LDHs) and their derivatives are promising candidates due to their suitable band edge positions (oxidation-reduction potentials) for high photocatalytic performances, flexible properties derived from adjustable components and tailorable electronic structures, chemical stabilities, and low toxicities. This review focuses on the fabrication and modification of Zn-LDHs and their photocatalytic applications for the elimination of contaminants in water, including the degradation of toxic organic pollutants, transfer of hazardous heavy metals to lower toxicity heavy metals, and bacterial inactivation. The mechanisms involved in the photocatalytic processes are also thoroughly reviewed. Finally, the emerging scientific and engineering opportunities and challenges in environmental photocatalysis are presented. This review provides basic insights into the construction of Zn-LDH-based materials with high photocatalytic activities and new perspectives on their applications for the photocatalytic elimination of contaminants, which is helpful for the development of photocatalysis for environmental remediation from the lab to industry.

Adsorption characteristics of Cr(VI) on microalgae immobilized by different carriers

To solve the problem of harvesting microalgae during heavy metal adsorption, six different carriers were selected in this study to compare the adsorption behavior of microalgae after immobilization. The results of the scanning electron microscope (SEM) and adsorption showed chitosan as a carrier showed the best immobilization effect and adsorption advantages after immobilizing microalgae. The optimal immobilized carrier-chitosan was obtained under the following conditions of chitosan: acetic acid (2:40), microalgae concentration (10⁸ cells mL^-1), and immobilization time (18 h). The optimal adsorption conditions were as follows: temperature: 30 °C, pH: 7.0, adsorption dose: 1.5 g L^-1, initial ion concentration: 40 mg L^-1. The adsorption capacity of metal ions can reach 37.1 mg g^-1 Cr(VI), 25.98 mg g^-1 Cu(II), 25.06 mg g^-1 Pb(II), and 24.62 mg g^-1 Cd(II), respectively. The desorption efficiency in 0.5 mol L^-1 NaOH desorption solution reached 90.01%. After five adsorption-desorption cycles, excluding chitosan (∼70%), the adsorption efficiency of other adsorbents decreased with an increase in the recycling times. Chitosan was a suitable carrier for the immobilization of Synechocystis sp. PCC6803. Fourier transform infrared spectroscopy and Raman spectra analysis showed that groups belonging to the microalgae were detected after the microalgae in different carriers, indicating that the microalgae were immobilized with the carriers. At the same time, the energy spectrum changed before and after adsorption indicated the specific functional groups of microalgae played an important role in the adsorption process. The kinetic and isothermal model data showed that the adsorption process was mainly chemical adsorption and homogeneous monolayer adsorption. Moreover, X-ray diffraction showed the interlayer peak strength decreased significantly, indicating that the interlayer structure was stretched after Cr(VI) ion exchange. X-ray photoelectron spectroscopy analysis showed that the Cr adsorption process involves the reduction of Cr(VI) to Cr(III).

Biochar Nanoparticles over TiO2 Nanotube Arrays: A Green Co-Catalyst to Boost the Photocatalytic Degradation of Organic Pollutants

Biochar nanoparticles (BC NPs), produced by low temperature pyrolysis (350 °C) of microalgae (Nannochloropsis sp.) and nutshells, are proposed as low-cost and sustainable co-catalysts to promote the photocatalytic activity of TiO2 nanotube (NT) arrays towards the degradation of methylene blue (MB) used as an organic pollutant model molecule. BC NPs (size < 25 nm) were obtained by treating bulk BC (i.e., biomass after pyrolysis) by sonication–centrifugation cycles in a water solution. The filtered BC NPs dispersion was deposited by simple drop-casting on the TiO2 NT support. The BC loading was varied by performing multiple depositions. Photocatalytic experiments under UV light (365 nm) revealed that the decoration with BC NPs significantly improves the TiO2 photoactivity. Such enhancement is mainly influenced by the amount of BC deposited; upon optimizing the BC deposition conditions, the rate of photocatalytic degradation of MB increases approximately three times with respect to bare TiO2, almost irrespective of the nature of the raw material. The greater photocatalytic activity of BC-TiO2 can be attributed to the synergistic combination of reactant/product adsorption and catalytic degradation of the adsorbed organic pollutant, as well as an improved charge carrier separation and electron transfer.