Topology of the calmodulin-melittin complex

Structures of calmodulin-melittin complexes show multiple binding modes lacking classical anchoring interactions

Calmodulin (CaM) is a Ca²⁺ sensor protein found in all eukaryotic cells that regulates a large number of target proteins in a Ca²⁺ concentration-dependent manner. As a transient type hub protein, it recognizes linear motifs of its targets, though for the Ca²⁺-dependent binding no consensus sequence was identified. Its complex with melittin, a major component of bee venom, is often used as a model system of protein - protein complexes. Yet, the structural aspects of the binding are not well understood, as only diverse, low-resolution data are available concerning the association. We present the crystal structure of melittin in complex with Ca²⁺-saturated calmodulins from two, evolutionarily distant species, Homo sapiens and Plasmodium falciparum representing three binding modes of the peptide. Results - augmented by molecular dynamics simulations - indicate that multiple binding modes can exist for CaM-melittin complexes, as an intrinsic characteristic of the binding. While the helical structure of melittin remains, swapping of its salt bridges and partial unfolding of its C-terminal segment can occur. In contrast to the classical way of target recognition by CaM, we found that different sets of residues can anchor at the hydrophobic pockets of CaM, which were considered as main recognition sites. Finally, the nanomolar binding affinity of the CaM-melittin complex is created by an ensemble of arrangements of similar stability - tight binding is achieved not by optimized specific interactions but by simultaneously satisfying less optimal interaction patterns in co-existing different conformers.

Unveiling the biological interface of protein complexes by mass spectrometry-coupled methods

Most biomolecules become functional and bioactive by forming protein complexes through interaction with ligands that are diverse in size, shape, and physicochemical properties. In the complex biological milieu, the interaction is ligand-specific, driven by molecular sensing, and involves the recognition of a binding interface localized within a protein structure. Mapping interfaces of protein complexes is a highly sought area of research as it delivers fundamental insights into proteomes and pathology and hence strategies for therapeutics. While X-ray crystallography and electron microscopy remain the gold standard for structural elucidation of protein complexes, their artificial and static analytic nature often produces a non-native interface that otherwise might be negligible or non-existent in a biological environment. Recently, the mass spectrometry-coupled approaches, chemical crosslinking (CLMS) and hydrogen-deuterium exchange (HDMS) have become valuable analytic complements to the traditional techniques. These methods explicitly identify hot residues and motifs embedded in binding interfaces, especially when the interaction is predominantly dynamic, transient, and/or caused by an intrinsically disordered domain. Here, we review the principal role of CLMS and HDMS in protein structural biology with a particular emphasis on the contribution of recent examples to exploring biological interfaces. Additionally, we describe recent studies that utilized these methods to expand our understanding of protein complex formation and the related biological processes, to increase the probability of structure-based drug design.

Cation and peptide binding properties of CML7, a calmodulin-like protein from Arabidopsis thaliana

Plants contain a large family of so-called calmodulin-like proteins (CMLs) which differ from canonical calmodulin in that they show greater variability in sequence, length, and number of EF-hand domains. The presence of this extended CML family has raised questions regarding the role of these proteins: are they functionally redundant or do they play specific functions in physiological plant processes? To answer these questions, comprehensive biochemical and structural information on CML proteins is fundamental. Among the 50 CMLs from Arabidopsis thaliana, herein we described the ability of CML7 to bind metal ions focusing on the Ca²⁺ and Mg²⁺ sensing properties, as well as on metal-induced conformational changes. Circular dichroism and nuclear magnetic resonance (NMR) studies indicated that both Ca²⁺ and Mg²⁺ stabilize CML7, as reflected in conformational rearrangements in secondary and tertiary structure and in increases in thermal stability of the protein. However, the conformational changes that binding induces differ between the two metal ions, and only Ca²⁺ binding controls a structural transition that leads to hydrophobic exposure, as suggested by 8-anilino-1-naphthalenesulfonic acid fluorescence. Isothermal titration calorimetry data coupled with NMR experiments revealed the presence of two high affinity Ca²⁺-binding sites in the C-lobe of CML7 and two weaker sites in the N-lobe. The paired nature of these CML7 EF-hands enables them to bind Ca²⁺ with positive cooperativity within each globular domain. Our results clearly place CML7 in the category of Ca²⁺ sensors. Along with this, the protein can bind to a model target peptide (melittin) in a Ca²⁺-dependent manner.

Protein-Ligand Interaction by Ligand Titration, Fast Photochemical Oxidation of Proteins and Mass Spectrometry: LITPOMS

We report a novel method named LITPOMS (ligand titration, fast photochemical oxidation of proteins and mass spectrometry) to characterize protein-ligand binding stoichiometry, binding sites, and site-specific binding constants. The system used to test the method is melittin-calmodulin, in which the peptide melittin binds to calcium-bound calmodulin. Global-level measurements reveal the binding stoichiometry of 1:1 whereas peptide-level data coupled with fitting reveal the binding sites and the site-specific binding affinity. Moreover, we extended the analysis to the residue level and identified six critical binding residues. The results show that melittin binds to the N-terminal, central linker, and C-terminal regions of holo-calmodulin with an affinity of 4.6 nM, in agreement with results of previous studies. LITPOMS, for the first time, brings high residue-level resolution to affinity measurements, providing simultaneously qualitative and quantitative understanding of protein-ligand binding. The approach can be expanded to other binding systems without tagging the protein to give high spatial resolution. Graphical Abstract.

Chemical cross-linking in the structural analysis of protein assemblies

For decades, chemical cross-linking of proteins has been an established method to study protein interaction partners. The chemical cross-linking approach has recently been revived by mass spectrometric analysis of the cross-linking reaction products. Chemical cross-linking and mass spectrometric analysis (CXMS) enables the identification of residues that are close in three-dimensional (3D) space but not necessarily close in primary sequence. Therefore, this approach provides medium resolution information to guide de novo structure prediction, protein interface mapping and protein complex model building. The robustness and compatibility of the CXMS approach with multiple biochemical methods have made it especially appealing for challenging systems with multiple biochemical compositions and conformation states. This review provides an overview of the CXMS approach, describing general procedures in sample processing, data acquisition and analysis. Selection of proper chemical cross-linking reagents, strategies for cross-linked peptide identification, and successful application of CXMS in structural characterization of proteins and protein complexes are discussed.

Development and Applications of Liquid Sample Desorption Electrospray Ionization Mass Spectrometry

Desorption electrospray ionization mass spectrometry (DESI-MS) is a recent advance in the field of analytical chemistry. This review surveys the development of liquid sample DESI-MS (LS-DESI-MS), a variant form of DESI-MS that focuses on fast analysis of liquid samples, and its novel analy-tical applications in bioanalysis, proteomics, and reaction kinetics. Due to the capability of directly ionizing liquid samples, liquid sample DESI (LS-DESI) has been successfully used to couple MS with various analytical techniques, such as microfluidics, microextraction, electrochemistry, and chromatography. This review also covers these hyphenated techniques. In addition, several closely related ionization methods, including transmission mode DESI, thermally assisted DESI, and continuous flow-extractive DESI, are briefly discussed. The capabilities of LS-DESI extend and/or complement the utilities of traditional DESI and electrospray ionization and will find extensive and valuable analytical application in the future.

Protein Structural Analysis via Mass Spectrometry-Based Proteomics

Modern mass spectrometry (MS) technologies have provided a versatile platform that can be combined with a large number of techniques to analyze protein structure and dynamics. These techniques include the three detailed in this chapter: (1) hydrogen/deuterium exchange (HDX), (2) limited proteolysis, and (3) chemical crosslinking (CX). HDX relies on the change in mass of a protein upon its dilution into deuterated buffer, which results in varied deuterium content within its backbone amides. Structural information on surface exposed, flexible or disordered linker regions of proteins can be achieved through limited proteolysis, using a variety of proteases and only small extents of digestion. CX refers to the covalent coupling of distinct chemical species and has been used to analyze the structure, function and interactions of proteins by identifying crosslinking sites that are formed by small multi-functional reagents, termed crosslinkers. Each of these MS applications is capable of revealing structural information for proteins when used either with or without other typical high resolution techniques, including NMR and X-ray crystallography.

Cross-linking electrochemical mass spectrometry for probing protein three-dimensional structures

Chemical cross-linking combined with mass spectrometry (MS) is powerful to provide protein three-dimensional structure information but difficulties in identifying cross-linked peptides and elucidating their structures limit its usefulness. To tackle these challenges, this study presents a novel cross-linking MS in conjunction with electrochemistry using disulfide-bond-containing dithiobis[succinimidyl propionate] (DSP) as the cross-linker. In our approach, electrolysis of DSP-bridged protein/peptide products, as online monitored by desorption electrospray ionization mass spectrometry is highly informative. First, as disulfide bonds are electrochemically reducible, the cross-links are subject to pronounced intensity decrease upon electrolytic reduction, suggesting a new way to identify cross-links. Also, mass shift before and after electrolysis suggests the linkage pattern of cross-links. Electrochemical reduction removes disulfide bond constraints, possibly increasing sequence coverage for tandem MS analysis and yielding linear peptides whose structures are more easily determined than their cross-linked precursor peptides. Furthermore, this cross-linking electrochemical MS method is rapid, due to the fast nature of electrochemical conversion (much faster than traditional chemical reduction) and no need for chromatographic separation, which would be of high value for structural proteomics research.

SIRT1 gene expression upon genotoxic damage is regulated by APE1 through nCaRE-promoter elements

APE1 is recruited to the transcription initiation site of the SIRT1 promoter during early cell response to oxidative stress. This reveals the importance of BER enzyme involvement in controlling specific gene expression at the transcriptional level.

Apurinic/apyrimidinic endonuclease 1 (APE1) is a multifunctional protein contributing to genome stability via repair of DNA lesions via the base excision repair pathway. It also plays a role in gene expression regulation and RNA metabolism. Another, poorly characterized function is its ability to bind to negative calcium responsive elements (nCaRE) of some gene promoters. The presence of many functional nCaRE sequences regulating gene transcription can be envisioned, given their conservation within ALU repeats. To look for functional nCaRE sequences within the human genome, we performed bioinformatic analyses and identified 57 genes potentially regulated by APE1. We focused on sirtuin-1 (SIRT1) deacetylase due to its involvement in cell stress, including senescence, apoptosis, and tumorigenesis, and its role in the deacetylation of APE1 after genotoxic stress. The human SIRT1 promoter presents two nCaRE elements stably bound by APE1 through its N-terminus. We demonstrate that APE1 is part of a multiprotein complex including hOGG1, Ku70, and RNA Pol II, which is recruited on SIRT1 promoter to regulate SIRT1 gene functions during early response to oxidative stress. These findings provide new insights into the role of nCaRE sequences in the transcriptional regulation of mammalian genes.

Painting proteins blue: β-(1-azulenyl)-L-alanine as a probe for studying protein-protein interactions

We demonstrated that β-(1-azulenyl)-L-alanine, a fluorescent pseudoisosteric analog of tryptophan, exhibits weak environmental dependence and thus allows for using weak intrinsic quenchers, such as methionines, to monitor protein-protein interactions while not perturbing them.

Integrating mass spectrometry of intact protein complexes into structural proteomics

MS analysis of intact protein complexes has emerged as an established technology for assessing the composition and connectivity within dynamic, heterogeneous multiprotein complexes at low concentrations and in the context of mixtures. As this technology continues to move forward, one of the main challenges is to integrate the information content of such intact protein complex measurements with other MS approaches in structural biology. Methods such as H/D exchange, oxidative foot-printing, chemical cross-linking, affinity purification, and ion mobility separation add complementary information that allows access to every level of protein structure and organization. Here, we survey the structural information that can be retrieved by such experiments, demonstrate the applicability of integrative MS approaches in structural proteomics, and look to the future to explore upcoming innovations in this rapidly advancing area.

Characterisation of Calmodulin Structural Transitions by Ion Mobility Mass Spectrometry

This study demonstrates the ability of travelling wave ion mobility-mass spectrometry to measure collision cross-sections of ions in the negative mode, using a calibration based approach. Here, negative mode ion mobility-mass spectrometry was utilised to understand structural transitions of calmodulin upon Ca2+ binding and complexation with model peptides melittin and the plasma membrane Ca2+ pump C20W peptide. Coexisting calmodulin conformers were distinguished on the basis of their mass and cross-section, and identified as relatively folded and unfolded populations, with good agreement in collision cross-section to known calmodulin geometries. Titration of calcium tartrate to physiologically relevant Ca2+ levels provided evidence for intermediately metalated species during the transition from apo- to holo-calmodulin, with collision cross-section measurements indicating that higher Ca2+ occupancy is correlated with more compact structures. The binding of two representative peptides which exemplify canonical compact (melittin) and extended (C20W) peptide-calmodulin binding models has also been interrogated by ion mobility mass spectrometry. Peptide binding to calmodulin involves intermediates with metalation states from 1–4 Ca2+, which demonstrate relatively collapsed structures, suggesting neither the existence of holo-calmodulin or a pre-folded calmodulin conformation is a prerequisite for binding target peptides or proteins. The biological importance of the different metal unsaturated calmodulin complexes, if any, is yet to be understood.

Structural characterization of the interactions between palladin and α-actinin

The interaction between α-actinin and palladin, two actin-cross-linking proteins, is essential for proper bidirectional targeting of these proteins. As a first step toward understanding the role of this complex in organizing cytoskeletal actin, we have characterized binding interactions between the EF-hand domain of α-actinin (Act-EF34) and peptides derived from palladin and generated an NMR-derived structural model for the Act-EF34/palladin peptide complex. The critical binding site residues are similar to an α-actinin binding motif previously suggested for the complex between Act-EF34 and titin Z-repeats. The structure-based model of the Act-EF34/palladin peptide complex expands our understanding of binding specificity between the scaffold protein α-actinin and various ligands, which appears to require an α-helical motif containing four hydrophobic residues, common to many α-actinin ligands. We also provide evidence that the Family X mutation in palladin, associated with a highly penetrant form of pancreatic cancer, does not interfere with α-actinin binding.

Hydrophobic Peptides Affect Binding of Calmodulin and Ca as Explored by H/D Amide Exchange and Mass Spectrometry

Calmodulin (CaM), a ubiquitous intracellular sensor protein, binds Ca(2+) and interacts with various targets as part of signal transduction. Using hydrogen/deuterium exchange (H/DX) and a high resolution PLIMSTEX (Protein-Ligand Interactions by Mass Spectrometry, Titration, and H/D Exchange) protocol, we examined five different states of calmodulin: calcium-free, calcium-loaded, and three states of calcium-loaded in the presence of either melittin, mastoparan, or skeletal myosin light-chain kinase (MLCK). When CaM binds Ca(2+), the extent of HDX decreased, consistent with the protein becoming stabilized upon binding. Furthermore, Ca(2+)-saturated calmodulin exhibits increased protection when bound to the peptides, forming high affinity complexes. The protocol reveals significant changes in EF hands 1, 3, and 4 with saturating levels of Ca(2+). Titration of the protein using PLIMSTEX provides the binding affinity of Ca(2+) to calmodulin within previously reported values. The affinities of calmodulin to Ca(2+) increase by factors of 300 and 1000 in the presence of melittin and mastoparan, respectively. A modified PLIMSTEX protocol whereby the protein is digested to component peptides gives a region-specific titration. The titration data taken in this way show a decrease in the root mean square fit of the residuals, indicating a better fit of the data. The global H/D exchange results and those obtained in a region-specific way provide new insight into the Ca(2+)-binding properties of this well-studied protein.

Quantification of protein-protein interactions with chemical cross-linking and mass spectrometry

Chemical cross-linking in combination with mass spectrometry has largely been used to study protein structures and protein-protein interactions. Typically, it is used in a qualitative manner to identify cross-linked sites and provide a low-resolution topological map of the interacting regions of proteins. Here, we investigate the capability of chemical cross-linking to quantify protein-protein interactions using a model system of calmodulin and substrates melittin and mastoparan. Calmodulin is a well-characterized protein which has many substrates. Melittin and mastoparan are two such substrates which bind to calmodulin in 1:1 ratios in the presence of calcium. Both the calmodulin-melittin and calmodulin-mastoparan complexes have had chemical cross-linking strategies successfully applied in the past to investigate topological properties. We utilized an excess of immobilized calmodulin on agarose beads and formed complexes with varying quantities of mastoparan and melittin. Then, we applied disuccinimidyl suberate (DSS) chemical cross-linker, digested and detected cross-links through an LC-MS analytical method. We identified five interpeptide cross-links for calmodulin-melittin and three interpeptide cross-links for calmodulin-mastoparan. Using cross-linking sites of calmodulin-mastoparan, we demonstrated that mastoparan also binds in two orientations to calmodulin. We quantitatively demonstrated that both melittin and mastoparan preferentially bind to calmodulin in a parallel fashion, which is opposite to the preferred binding mode of the majority of known calmodulin binding peptides. We also demonstrated that the relative abundances of cross-linked peptide products quantitatively reflected the abundances of the calmodulin peptide complexes formed.

Fast photochemical oxidation of proteins for comparing structures of protein-ligand complexes: the calmodulin-peptide model system

Fast photochemical oxidation of proteins (FPOP) is a mass spectrometry-based protein footprinting method that modifies proteins on the microsecond time scale. Highly reactive (•)OH, produced by laser photolysis of hydrogen peroxide, oxidatively modifies the side chains of approximately one-half the common amino acids on this time scale. Because of the short labeling exposure, only solvent-accessible residues are sampled. Quantification of the modification extent for the apo and holo states of a protein-ligand complex provides structurally sensitive information at the amino-acid level to compare the structures of unknown protein complexes with known ones. We report here the use of FPOP to monitor the structural changes of calmodulin in its established binding to M13 of the skeletal muscle myosin light chain kinase. We use the outcome to establish the unknown structures resulting from binding with melittin and mastoparan. The structural comparison follows a comprehensive examination of the extent of FPOP modifications as measured by proteolysis and LC-MS/MS for each protein-ligand equilibrium. The results not only show that the three calmodulin-peptide complexes have similar structures but also reveal those regions of the protein that became more or less solvent-accessible upon binding. This approach has the potential for relatively high throughput, information-dense characterization of a series of protein-ligand complexes in biochemistry and drug discovery when the structure of one reference complex is known, as is the case for calmodulin and M13 of the skeletal muscle myosin light chain kinase, and the structures of related complexes are not.

Investigation of calmodulin-Peptide interactions using matrix-assisted laser desorption/ionization mass spectrometry

In this report, matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) was used to study the binding interactions between calmodulin and two target peptides (melittin and substance P). Various matrix conditions were tested and the less acidic matrix DHAP and THAP were found to favor the survival of the intact calcium-calmodulin as well as the calmodulin-peptide complexes. However, the application of direct MALDI-MS to detect the intact complexes turned out to be very difficult due to the dissociation of the complexes and the formation of nonspecific aggregates. In contrast, the specific binding of the target peptides to calmodulin could be easily deduced using intensity-fading (IF) MALDI-MS. Compared with the nonbinding control, clear reduction in the ion abundances of the target peptides was observed with the addition of calmodulin. Relative binding affinities of different peptides towards the protein could also be estimated using IF-MALDI-MS. This study may extend the application of IF-MALDI-MS in the analysis of noncovalent complexes and offer a perspective into the utility of MALDI-MS as an alternative approach to study the peptides binding to calmodulin.

Structural characterization of the functional regions in the archaeal protein Sso7d

Sso7d from the extreme thermophilic crenarchaeon Sulfolobus solfataricus is a multifunctional protein in in vitro assays, whose in vivo role is still puzzling. Crystals of Sso7d in complex with DNA elucidated the protein surface involved in the binding to the nucleic acid, whereas the locations of the Sso7d regions responsible for a chaperone activity in renaturing protein aggregates (i.e., the protein-binding surface and the site of ATPase activity) are still unknown. We identified the regions of Sso7d involved in protein-binding by limited proteolysis experiments associated to advanced mass spectrometric procedures performed on isolated Sso7d and Sso7d in complex with the peptide melittin. By affinity labeling of Sso7d with the ATP analogue 5'-p-fluorosulfonylbenzoyl adenosine and characterization of the labeled tryptic peptides by tandem mass spectrometry, we found that Y7 and K39 are residues involved in ATP binding/hydrolysis. Insights into the positions of the ligands melittin and ATP were achieved by a molecular modeling study; the models obtained were in agreement with most experimental data. A comparison among the complexes of Sso7d with DNA, with melittin, and with ATP showed that the DNA-binding surface and the protein-binding surface overlap, whereas the ATPase site is mostly independent of the binding sites for the nucleic acid and melittin.

Monitoring conformational changes in protein complexes using chemical cross-linking and Fourier transform ion cyclotron resonance mass spectrometry: the effect of calcium binding on the calmodulin-melittin complex

Calmodulin is an EF hand calcium binding protein. Its binding affinities to various protein/peptide targets often depend on the conformational changes induced by the binding of calcium. One such target is melittin, which binds tightly to calmodulin in the presence of calcium, and inhibits its function. Chemical cross-linking combined with Fourier transform ion cyclotron resonance mass spectrometry has been employed to investigate the coordination of calmodulin and melittin in the complex at different concentrations of calcium. This methodology can be used to monitor structural changes of proteins induced by ligand binding, and study the effects these changes have on non- covalent interactions between proteins. Cross-linking results indicate that the binding place of the first melittin in the calcium free calmodulin form is the same as in the calcium loaded calmodulin/melittin complex.

Recombinant amyloidogenic domain of ApoA-I: analysis of its fibrillogenic potential

A variety of amyloid diseases are associated with fibrillar aggregates from N-terminal fragments of ApoA-I generated through a largely unexplored multi-step process. The understanding of the molecular mechanism is impaired by the lack of suitable amounts of the fibrillogenic polypeptides that could not be produced by recombinant methods so far. We report the production and the conformational analysis of recombinant ApoA-I 1-93 fragment. Similarly to the polypeptide isolated ex vivo, a pH switch from 7 to 4 induces a fast and reversible conformational transition to a helical state and leads to the identification of a key intermediate in the fibrillogenesis process. Limited proteolysis experiments suggested that the C-terminal region is involved in helix formation. The recombinant polypeptide generates fibrils at pH 4 on a time scale comparable with that of the native fragment. These findings open the way to studies on structural, thermodynamic, and kinetic aspects of ApoA-I fibrillogenesis.

Structural and functional behavior of biologically active monomeric melittin

Melittin is a well-known water-soluble toxic peptide present in bee venom of Apis mellifera, capable of interacting with and disrupting cell membranes thus producing many effects on living cells. Additionally, melittin induces activation of phospholipases and calmodulin upon interaction with cellular membranes. The conformation and aggregation state adopted by melittin in solution depends on several factors including the peptide concentration, ionic strength, pH and the nature of the ions in the aqueous medium. Such conformational dependence on the peptide environment gives new insights over the currently available 3D structures of melittin and, ultimately, over its biologically functional unit. Based on crystallographic data, the melittin tetramer has been proposed as its bioactive form. Contrarily to such data, we show in this work the results obtained from molecular dynamics simulations, which clearly indicate that the tetrameric organization of melittin is not stable under biological conditions dissociating after 2.5 ns through a 10 ns trajectory. We found that the tetrameric form of melittin is stable only in conditions of high pH and high peptide concentration in the molecular dynamics simulations. Moreover, when in plasma melittin appears to be a random coil monomer, folding only upon interaction with biological membranes. In summary, these findings elucidate several properties of melittin structure and dynamics, projecting significant implications in the study of its biological function.

PROXIMO--a new docking algorithm to model protein complexes using data from radical probe mass spectrometry (RP-MS)

The design and implementation of a new algorithm, known as PROXIMO for protein oxidation interface modeller, is described to predict the structure of protein complexes using data generated in radical probe mass spectrometry (RP-MS) experiments. Photochemical radiolysis and discharge sources can be used to effect RP-MS in which hydroxyl radicals are formed directly from the bulk solvent on millisecond timescales and react with surface accessible residues in footprinting-like experiments. The algorithm utilizes a geometric surface fitting routine to predict likely structures for protein complexes. These structures are scored based on a correlation between the measured solvent accessibility of oxidizable residue side chains and oxidation shielding data obtained by RP-MS. The algorithm has been implemented to predict structures for the ribonuclease S-protein-peptide and calmodulin-melittin complexes using RP-MS data generated in this laboratory. The former is in close agreement with the high-resolution experimental structure available.

Protease Accessibility Laddering: A Proteomic Tool for Probing Protein Structure

Limited proteolysis is widely used in biochemical and crystallographic studies to determine domain organization, folding properties, and ligand binding activities of proteins. The method has limitations, however, due to the difficulties in obtaining sufficient amounts of correctly folded proteins and in interpreting the results of the proteolysis. A new limited proteolysis method, named protease accessibility laddering (PAL), avoids these complications. In PAL, tagged proteins are purified on magnetic beads in their natively folded state. While attached to the beads, proteins are probed with proteases. Proteolytic fragments are eluted and detected by immunoblotting with antibodies against the tag (e.g., Protein A, GFP, and 6xHis). PAL readily detects domain boundaries and flexible loops within proteins. A combination of PAL and comparative protein structure modeling allows characterization of previously unknown structures (e.g., Sec31, a component of the COPII coated vesicle). PAL's high throughput should greatly facilitate structural genomic and proteomic studies.

Ribosomal protein L7a binds RNA through two distinct RNA-binding domains

The human ribosomal protein L7a is a component of the major ribosomal subunit. We previously identified three nuclear-localization-competent domains within L7a, and demonstrated that the domain defined by aa (amino acids) 52-100 is necessary, although not sufficient, to target the L7a protein to the nucleoli. We now demonstrate that L7a interacts in vitro with a presumably G-rich RNA structure, which has yet to be defined. We also demonstrate that the L7a protein contains two RNA-binding domains: one encompassing aa 52-100 (RNAB1) and the other encompassing aa 101-161 (RNAB2). RNAB1 does not contain any known nucleic-acid-binding motif, and may thus represent a new class of such motifs. On the other hand, a specific region of RNAB2 is highly conserved in several other protein components of the ribonucleoprotein complex. We have investigated the topology of the L7a-RNA complex using a recombinant form of the protein domain that encompasses residues 101-161 and a 30mer poly(G) oligonucleotide. Limited proteolysis and cross-linking experiments, and mass spectral analyses of the recombinant protein domain and its complex with poly(G) revealed the RNA-binding region.

Probabilistic cross-link analysis and experiment planning for high-throughput elucidation of protein structure

Emerging high-throughput techniques for the characterization of protein and protein-complex structures yield noisy data with sparse information content, placing a significant burden on computation to properly interpret the experimental data. One such technique uses cross-linking (chemical or by cysteine oxidation) to confirm or select among proposed structural models (e.g., from fold recognition, ab initio prediction, or docking) by testing the consistency between cross-linking data and model geometry. This paper develops a probabilistic framework for analyzing the information content in cross-linking experiments, accounting for anticipated experimental error. This framework supports a mechanism for planning experiments to optimize the information gained. We evaluate potential experiment plans using explicit trade-offs among key properties of practical importance: discriminability, coverage, balance, ambiguity, and cost. We devise a greedy algorithm that considers those properties and, from a large number of combinatorial possibilities, rapidly selects sets of experiments expected to discriminate pairs of models efficiently. In an application to residue-specific chemical cross-linking, we demonstrate the ability of our approach to plan experiments effectively involving combinations of cross-linkers and introduced mutations. We also describe an experiment plan for the bacteriophage lambda Tfa chaperone protein in which we plan dicysteine mutants for discriminating threading models by disulfide formation. Preliminary results from a subset of the planned experiments are consistent and demonstrate the practicality of planning. Our methods provide the experimenter with a valuable tool (available from the authors) for understanding and optimizing cross-linking experiments.

Hydroxyl radical probe of the calmodulin-melittin complex interface by electrospray ionization mass spectrometry

The calcium-dependent interaction of calmodulin and melittin is studied through the application of a radical probe approach in which solutions of the protein and peptide and protein alone are subjected to high fluxes of hydroxyl and other oxygen radicals on millisecond timescales. These radicals are generated by an electrical discharge within an electrospray ion source of a mass spectrometer. Condensation of the electrosprayed droplets followed by proteolytic digestion of both calmodulin and melittin has identified residues in both which participate in the interaction and/or are shielded from solvent within the protein complex. Consistent with other theoretical models and available experimental data, the tryptophan residue of melittin at position 19 is shown to be critical to the formation of the complex with the C-terminal domain of peptide enveloped by and protected from oxidation upon binding to the protein. Furthermore, the N-terminal domain (to residue 36) and tyrosine at position 99 in calmodulin are significantly protected from limited oxidation upon the binding of melittin while exposing the phenylalanine residue at position 92 of the flexible loop domain. The N-terminus (through residue 36) of calmodulin is shown to lie in closer proximity to the melittin helix than its C-terminal counterpart (residues 127-148) based upon the protection levels measured at reactive residues within these segments of the protein.

Calcium and Magnesium Binding to Human Centrin 3 and Interaction with Target Peptides

There are four isoforms of centrin in mammals, with variable sequence, tissue expression, and functional properties. We have recently characterized a number of structural, ion, and target binding properties of human centrin isoform HsCen2. This paper reports a similar characterization of HsCen3, overexpressed in Escherichia coli and purified by phase-reversed chromatography. Equilibrium and dynamic binding studies revealed that HsCen3 has one mixed Ca(2+)/Mg(2+) binding site of high affinity (K(d) = 3 and 10 microM for Ca(2+) and Mg(2+), respectively) and two Ca(2+)-specific sites of low affinity (K(d) = 140 microM). The metal-free protein is fragmented by an unidentified protease into a polypeptide segment of 11 kDa, which was purified by HPLC, and identified by mass spectrometry as the segment of residues 21-112. Similarly, controlled trypsinolysis on Ca(2+)-bound HsCen3 yielded a mixture of segments of residues 1-124 and 1-125. The Ca(2+)/Mg(2+) site could be assigned to this segment and thus resides in the N-terminal half of HsCen3. Temperature denaturation experiments, circular dichroism, and utilization of fluorescence hydrophobic probes allowed us to propose that the metal-free protein has molten globule characteristics and that the dication-bound forms are compact with a polar surface for the Mg(2+) form and a hydrophobic exposed surface for the Ca(2+) form. Thus, HsCen3 could be classified as a Ca(2+) sensor protein. In addition, it is able to bind strongly to a model target peptide (melittin), as well as to peptides derived from the protein XPC and Kar1p, with a moderate Ca(2+) dependence.

Direct interactions among Ret, GDNF and GFRalpha1 molecules reveal new insights into the assembly of a functional three-protein complex

The glial-cell-line-derived neurotrophic factor (GDNF) ligand activates the Ret receptor through the assembly of a multiprotein complex, including the GDNF family receptor alpha1 (GFRalpha1) molecule. Given the neuroprotective role of GDNF, there is an obvious need to precisely identify the structural regions engaged in direct interactions between the three molecules. Here, we combined a functional approach for Ret activity (in PC12 cells) to cross-linking experiments followed by MS-MALDI to study the interactions among the purified extracellular region of the human Ret, GDNF and GFRalpha1 molecules. This procedure allowed us to identify distinct regions of Ret that are physically engaged in the interaction with GDNF and GFRalpha1. The lack of these regions in a recombinant Ret form results in the failure of both structural and functional binding of Ret to GFRalpha1/GDNF complex. Furthermore, a model for the assembly of a transducing-competent Ret complex is suggested.

Mapping the topology and determination of a low-resolution three-dimensional structure of the calmodulin-melittin complex by chemical cross-linking and high-resolution FTICRMS: direct demonstration of multiple binding modes

Calmodulin serves as a calcium-dependent regulator in many metabolic pathways and is known to bind with high affinity to various target proteins and peptides. One such target is the small peptide melittin, the principal component of honeybee venom. The calmodulin-melittin system was used as a model system to gain further insight into target recognition of calmodulin. Using chemical cross-linking in combination with high-resolution Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS), we have determined the interacting regions within the calcium-dependent calmodulin-melittin complex and thus the orientation of bound melittin. Using ambiguous distance restraints derived from the chemical cross-linking data in combination with recently developed computational methods of conjoined rigid body/torsion angle simulated annealing, we were able to generate low-resolution three-dimensional structure models of the calmodulin-melittin complex, for which no high-resolution structure exists to date. Our data provide evidence for the first time that calmodulin can recognize target peptides in two opposing orientations simultaneously. The general procedure for mapping interacting regions within the complex involves conjugation of calmodulin and melittin with several cross-linking reagents possessing different specificities and spacer lengths, followed by enzymatic proteolysis of the cross-linked complex. The highly complex peptide mixtures were subsequently analyzed by nano-HPLC, which was online coupled to a FTICR mass spectrometer equipped with a nano-electrospray ionization source. The mass spectra obtained in this manner were screened for possible cross-linking products using customized software programs. This integrated approach, exemplified for mapping the topology of the calmodulin-melittin complex, is likely to have wide-ranging implications for structural studies on protein-protein interactions.

Conformational analysis of HAMLET, the folding variant of human alpha-lactalbumin associated with apoptosis

A combination of hydrogen/deuterium (H/D) exchange and limited proteolysis experiments coupled to mass spectrometry analysis was used to depict the conformation in solution of HAMLET, the folding variant of human alpha-lactalbumin, complexed to oleic acid, that induces apoptosis in tumor and immature cells. Although near- and far-UV CD and fluorescence spectroscopy were not able to discriminate between HAMLET and apo-alpha-lactalbumin, H/D exchange experiments clearly showed that they correspond to two distinct conformational states, with HAMLET incorporating a greater number of deuterium atoms than the apo and holo forms. Complementary proteolysis experiments revealed that HAMLET and apo are both accessible to proteases in the beta-domain but showed substantial differences in accessibility to proteases at specific sites. The overall results indicated that the conformational changes associated with the release of Ca2+ are not sufficient to induce the HAMLET conformation. Metal depletion might represent the first event to produce a partial unfolding in the beta-domain of alpha-lactalbumin, but some more unfolding is needed to generate the active conformation HAMLET, very likely allowing the protein to bind the C18:1 fatty acid moiety. On the basis of these data, a putative binding site of the oleic acid, which stabilizes the HAMLET conformation, is proposed.

Calmodulin Interacts with the Third Intracellular Loop of the Serotonin 5-Hydroxytryptamine1A Receptor at Two Distinct Sites

The serotonin 5-HT(1A) receptor couples to heterotrimeric G proteins and intracellular second messengers, yet no studies have investigated the possible role of additional receptor-interacting proteins in 5-HT(1A) receptor signaling. We have found that the ubiquitous Ca(2+)-sensor calmodulin (CaM) co-immunoprecipitates with the 5-HT(1A) receptor in Chinese hamster ovary fibroblasts. The human 5-HT(1A) receptor contains two putative CaM binding motifs, located in the N- and C-terminal juxtamembrane regions of the third intracellular loop of the receptor. Peptides encompassing both the N-terminal (i3N) and C-terminal (i3C) CaM-binding domains were tested for CaM binding. Using in vitro binding assays in combination with gel shift analysis, we demonstrated Ca(2+)-dependent formation of complexes between CaM and both peptides. We determined kinetic data using a combination of BIAcore surface plasmon resonance (SPR) and dansyl-CaM fluorescence. SPR analysis gave an apparent K(D) of approximately 110 nm for the i3N peptide and approximately 700 nm for the i3C peptide. Both peptides also caused characteristic shifts in the fluorescence emission spectrum of dansyl-CaM, with apparent affinities of 87 +/- 23 nm and 1.70 +/- 0.16 microm. We used bioluminescence resonance energy transfer to show that CaM interacts with the 5-HT(1A) receptor in living cells, representing the first in vivo evidence of a G protein-coupled receptor interacting with CaM. Finally, we showed that CaM binding and phosphorylation of the 5-HT(1A) receptor i3 loop peptides by protein kinase C are antagonistic in vitro, suggesting a possible role for CaM in the regulation of 5-HT(1A) receptor phosphorylation and desensitization. These data suggest that the 5-HT(1A) receptor contains high and moderate affinity CaM binding regions that may play important roles in receptor signaling and function.

Quantification of protein-ligand interactions by mass spectrometry, titration, and H/D exchange: PLIMSTEX

Protein-ligand binding and the concomitant conformational change in the protein are of crucial importance in biophysics and drug design. We report a novel method to quantify protein-ligand interactions in solution by mass spectrometry, titration, and H/D exchange (PLIMSTEX). The approach can determine the conformational change, binding stoichiometry, and affinity in protein-ligand interactions including those that involve small molecules, metal ions, and peptides. Binding constants obtained by PLIMSTEX for four model protein-ligand systems agree with K values measured by conventional methods. At higher protein concentration, the method can be used to determine quickly the binding stoichiometry and possibly the purity of proteins. Taking advantage of concentrating the protein on-column and desalting, we are able to use different concentrations of proteins, buffer systems, salts, and pH in the exchange protocol. High picomole quantities of proteins are sufficient, offering significantly better sensitivity than that of NMR and X-ray crystallography. Automation could make PLIMSTEX a high throughput method for library screening, drug discovery, and proteomics.

Probing the dimeric structure of porcine aminoacylase 1 by mass spectrometric and modeling procedures

Aminoacylase 1 is a zinc-binding metalloprotease catalyzing the hydrolysis of N(alpha)-acylated l-amino acids; it presents altered expression levels in different renal and small cell lung carcinomas. A description of its redox and oligomerization state was achieved by combined biochemical and mass spectrometric procedures. A topological analysis of the enzyme structural architecture was derived from limited proteolysis and selective chemical modification experiments, using a broad range of proteases and chemical reagents. The analysis of the reaction products by different mass spectrometric techniques identified 26 amino acids as being accessible on the molecular surface, defining polypeptide regions exposed in the structure of the dimeric protein. The nature of the intermolecular contact zone between monomers was investigated by cross-linking reaction and mass mapping experiments. The cross-linked dimer was isolated, and the intermolecular cross-linked peptides were characterized, thus demonstrating the spatial proximity of Lys220 and Lys231 at the dimerization interface. Standard modeling procedures based on automatic alignment on the structure of members of the M20 peptidase family failed to produce a dimeric model consistent with experimental data. Discrepancies were observed mainly at the dimer interface and at loop regions. Therefore, a refined model for this dimeric protease was calculated by selecting the one able to generate a structure fully compatible with experimental findings, among all possible suboptimal sequence alignments. According to this model, each aminoacylase monomer consists of two domains: a globular catalytic subunit (residues 1-188 and 311-399) consisting of a beta-sheet sandwiched between alpha-helices and a second beta-sheet located on the surface, and the dimerization domain (residues 189-310) folding into a beta-sheet flanked on one side by two alpha-helices. These results indicate that reliable approaches such as limited proteolysis, selective chemical modification, and cross-linking coupled to mass spectrometry can be used to test and optimize molecular models of multimeric proteins and highlight problems in automatic model building.

nNOS inhibition, antimicrobial and anticancer activity of the amphibian skin peptide, citropin 1.1 and synthetic modifications. The solution structure of a modified citropin 1.1

A large number of bioactive peptides have been isolated from amphibian skin secretions. These peptides have a variety of actions including antibiotic and anticancer activities and the inhibition of neuronal nitric oxide synthase. We have investigated the structure-activity relationship of citropin 1.1, a broad-spectrum antibiotic and anticancer agent that also causes inhibition of neuronal nitric oxide synthase, by making a number of synthetically modified analogues. Citropin 1.1 has been shown previously to form an amphipathic alpha-helix in aqueous trifluoroethanol. The results of the structure-activity studies indicate the terminal residues are important for bacterial activity and increasing the overall positive charge, while maintaining an amphipathic distribution of residues, increases activity against Gram-negative organisms. Anticancer activity generally mirrors antibiotic activity suggesting a common mechanism of action. The N-terminal residues are important for inhibition of neuronal nitric oxide synthase, as is an overall positive charge greater than three. The structure of one of the more active synthetic modifications (A4K14-citropin 1.1) was determined in aqueous trifluoroethanol, showing that this peptide also forms an amphipathic alpha-helix.

Modulating calmodulin binding specificity through computational protein design

We report the computational redesign of the protein-binding interface of calmodulin (CaM), a small, ubiquitous Ca(2+)-binding protein that is known to bind to and regulate a variety of functionally and structurally diverse proteins. The CaM binding interface was optimized to improve binding specificity towards one of its natural targets, smooth muscle myosin light chain kinase (smMLCK). The optimization was performed using optimization of rotamers by iterative techniques (ORBIT), a protein design program that utilizes a physically based force-field and the Dead-End Elimination theorem to compute sequences that are optimal for a given protein scaffold. Starting from the structure of the CaM-smMLCK complex, the program considered 10(22) amino acid residue sequences to obtain the lowest-energy CaM sequence. The resulting eightfold mutant, CaM_8, was constructed and tested for binding to a set of seven CaM target peptides. CaM_8 displayed high binding affinity to the smMLCK peptide (1.3nM), similar to that of the wild-type protein (1.8nM). The affinity of CaM_8 to six other target peptides was reduced, as intended, by 1.5-fold to 86-fold. Hence, CaM_8 exhibited increased binding specificity, preferring the smMLCK peptide to the other targets. Studies of this type may increase our understanding of the origins of binding specificity in protein-ligand complexes and may provide valuable information that can be used in the design of novel protein receptors and/or ligands.

Topological investigation of amyloid fibrils obtained from beta2-microglobulin

Amyloid fibrils of patients treated with regular hemodialysis essentially consists of beta2-microglobulin (beta2-m) and its truncated species DeltaN6beta2-m lacking six residues at the amino terminus. The truncated fragment has a more flexible three-dimensional structure and constitutes an excellent candidate for the analysis of a protein in the amyloidogenic conformation. The surface topology of synthetic fibrils obtained from intact beta2-m and truncated DeltaN6beta2-m was investigated by the limited proteolysis/mass spectrometry approach that appeared particularly suited to gain insights into the structure of beta2-m within the fibrillar polymer. The distribution of prefential proteolytic sites observed in both fibrils revealed that the central region of the protein, which had been easily cleaved in the full-length globular beta2-m, was fully protected in the fibrillar form. In addition, the amino- and carboxy-terminal regions of beta2-m became exposed to the solvent in the fibrils, whereas they were masked completely in the native protein. These data indicate that beta2-m molecules in the fibrils consist of an unaccessible core comprising residues 20-87 with the strands I and VIII being not constrained in the fibrillar polymer and exposed to the proteases. Moreover, proteolytic cleavages observed in vitro at Lys 6 and Lys 19 reproduce specific cleavages that have to occur in vivo to generate the truncated forms of beta2-m occurring in natural fibrils. On the basis of these data, a possible mechanism for fibril formation from native beta2-m is discussed and an explanation for the occurrence of truncated protein species in natural fibrils is given.

Binding and relaxometric properties of heme complexes with cyanogen bromide fragments of human serum albumin

The spectroscopic and reactivity properties of hemin complexes formed with cyanogen bromide fragments B (residues 1-123), C (124-298), A (299-585), and D (1-298) of human serum albumin (HSA) have been investigated. The complex hemin-D exhibits binding, spectral, circular dichroism, and reactivity characteristics very similar to those of hemin-HSA, indicating that fragment D contains the entire HSA domain involved in heme binding. The characteristics of the other hemin complexes are different, and a detailed investigation of the properties of hemin-C has been carried out because this fragment contains the HSA binding region of several important drugs. Hemin-C contains a low-spin Fe(III) center, with two imidazole ligands, but the complex undergoes a reversible structural transition at basic pH leading to a high-spin, five-coordinated Fe(III) species. This change determines a marked increase in the relaxation rate of water protons. Limited proteolysis experiments and mass spectral analysis carried out on fragment C and hemin-C show that the region encompassing residues Glu-208 to Trp-214 is protected from activity of proteases in the complex and, therefore, is involved in the interaction with hemin. A structural model of fragment C enables us to propose that His-242 and His-288 are the axial ligands for the Fe(III) center.

The effect of prime-site occupancy on the hepatitis C virus NS3 protease structure

We recently reported a new class of inhibitors of the chymotrypsin-like serine protease NS3 of the hepatitis C virus. These inhibitors exploit the binding potential of the S' site of the protease, which is not generally used by the natural substrates. The effect of prime-site occupancy was analyzed by circular dichroism spectroscopy and limited proteolysis-mass spectrometry. Generally, nonprime inhibitors cause a structural change in NS3. Binding in the S' site produces additional conformational changes with different binding modes, even in the case of the NS3/4A cofactor complex. Notably, inhibitor binding either in the S or S' site also has profound effects on the stabilization of the protease. In addition, the stabilization propagates to regions not in direct contact with the inhibitor. In particular, the N-terminal region, which according to structural studies is endowed with low structural stability and is not stabilized by nonprime inhibitors, was now fully protected from proteolytic degradation. From the perspective of drug design, P-P' inhibitors take advantage of binding pockets, which are not exploited by the natural HCV substrates; hence, they are an entry point for a novel class of NS3/4A inhibitors. Here we show that binding of each inhibitor is associated with a specific structural rearrangement. The development of a range of inhibitors belonging to different classes and an understanding of their interactions with the protease are required to address the issue of the most likely outcome of viral protease inhibitor therapy, that is, viral resistance.

Description of the topographical changes associated to the different stages of the DsbA catalytic cycle

This paper provides a description of the surface topography of DsbA, the bacterial disulfide-bond forming enzyme, in the different phases of its catalytic cycle. Three representative states, that is, oxidized and reduced protein and a covalent complex mimicking the DsbA-substrate disulfide intermediate, have been investigated by a combination of limited proteolysis experiments and mass spectrometry methodologies. Protease-accessible sites are largely distributed in the oxidized form with a small predominance inside the thioredoxin domain. Proteolysis occurs even in secondary structure elements, revealing a significant mobility of the protein. Many cleavage sites disappear in the reduced form and most of the remaining ones appear with strongly reduced kinetics. The protein within the complex shows an intermediate behavior. This variation of flexibility in DsbA is probably the determining factor for the course of its catalytic cycle. In particular, the great mobility of the oxidized protein might facilitate the accommodation of its various substrates, whereas the increasing rigidity from the complexed to the reduced form could help the release of oxidized products. The formation of the complex between PID peptide and DsbA does not significantly protect the enzyme against proteolysis, reinforcing the results previously obtained by calorimetry concerning the weakness of their interaction. The few cleavage sites observed, however, are in favor of the presence of the peptide in the binding site postulated from crystallographic studies. As for the peptide itself, the proteolytic pattern and the protection effect exerted by DsbA could be explained by a preferential orientation within the binding site.

Conformational and thermodynamic properties of peptide binding to the human S100P protein

S100P is a member of the S100 subfamily of calcium-binding proteins that are believed to be associated with various diseases, and in particular deregulation of S100P expression has been documented for prostate and breast cancer. Previously, we characterized the effects of metal binding on the conformational properties of S100P and proposed that S100P could function as a Ca2+ conformational switch. In this study we used fluorescence and CD spectroscopies and isothermal titration calorimetry to characterize the target-recognition properties of S100P using a model peptide, melittin. Based on these experimental data we show that S100P and melittin can interact in a Ca2+-dependent and -independent manner. Ca2+-independent binding occurs with low affinity (Kd approximately 0.2 mM), has a stoichiometry of four melittin molecules per S100P dimer and is presumably driven by favorable electrostatic interactions between the acidic protein and the basic peptide. In contrast, Ca2+-dependent binding of melittin to S100P occurs with high affinity (Kd approximately 5 microM) has a stoichiometry of two molecules of melittin per S100P dimer, appears to have positive cooperativity, and is driven by hydrophobic interactions. Furthermore, Ca2+-dependent S100P-melittin complex formation is accompanied by significant conformational changes: Melittin, otherwise unstructured in solution, adopts a helical conformation upon interaction with Ca2+-S100P. These results support a model for the Ca2+-dependent conformational switch in S100P for functional target recognition.

Structural characterization of the M* partly folded intermediate of wild type and P138A aspartate aminotransferase from Escherichia coli

A combination of spectroscopic techniques, hydrogen/deuterium exchange, and limited proteolysis experiments coupled to mass spectrometry analysis was used to depict the topology of the monomeric M* partly folded intermediate of aspartate aminotransferase from Escherichia coli in wild type (WT) as well as in a mutant form in which the highly conserved cis-proline at position 138 was replaced by a trans-alanine (P138A). Fluorescence analysis indicates that, although M* is an off-pathway intermediate in the folding of WT aspartate aminotransferase from E. coli, it seems to coincide with an on-pathway folding intermediate for the P138A mutant. Spectroscopic data, hydrogen/deuterium exchange, and limited proteolysis experiments demonstrated the occurrence of conformational differences between the two M* intermediates, with P138A-M* being conceivably more compact than WT-M*. Limited proteolysis data suggested that these conformational differences might be related to a different relative orientation of the small and large domains of the protein induced by the presence of the cis-proline residue at position 138. These differences between the two M* species indicated that in WT-M* Pro138 is in the cis conformation at this stage of the folding process. Moreover, hydrogen/deuterium exchange results showed the occurrence of few differences in the native N(2) forms of WT and P138A, the spectroscopic features and crystallographic structures of which are almost superimposable.

Amphibian peptides that inhibit neuronal nitric oxide synthase. Isolation of lesuerin from the skin secretion of the Australian Stony Creek frog Litoria lesueuri

Two neuropeptides have been isolated and identified from the secretions of the skin glands of the Stony Creek Frog Litoria lesueuri. The first of these, the known neuropeptide caerulein 1.1, is a common constituent of anuran skin secretions, and has the sequence pEQY(SO3)TGWMDF-NH2. This neuropeptide is smooth muscle active, an analgaesic more potent than morphine and is also thought to be a hormone. The second neuropeptide, a new peptide, has been named lesueurin and has the primary structure GLLDILKKVGKVA-NH2. Lesueurin shows no significant antibiotic or anticancer activity, but inhibits the formation of the ubiquitous chemical messenger nitric oxide from neuronal nitric oxide synthase (nNOS) at IC(50) (16.2 microm), and is the first amphibian peptide reported to show inhibition of nNOS. As a consequence of this activity, we have tested other peptides previously isolated from Australian amphibians for nNOS inhibition. There are three groups of peptides that inhibit nNOS (IC(50) at microm concentrations): these are (a) the citropin/aurein type peptides (of which lesueurin is a member), e.g. citropin 1.1 (GLFDVIKKVASVIGGL-NH(2)) (8.2 microm); (b) the frenatin type peptides, e.g. frenatin 3 (GLMSVLGHAVGNVLG GLFKPK-OH) (6.8 microm); and (c) the caerin 1 peptides, e.g. caerin 1.8 (GLFGVLGSIAKHLLPHVVPVIAEKL-NH(2)) (1.7 microm). From Lineweaver-Burk plots, the mechanism of inhibition is revealed as noncompetitive with respect to the nNOS substrate arginine. When the nNOS inhibition tests with the three peptides outlined above were carried out in the presence of increasing concentrations of Ca(2+) calmodulin, the inhibition dropped by approximately 50% in each case. In addition, these peptides also inhibit the activity of calcineurin, another enzyme that requires the presence of the regulatory protein Ca(2+) calmodulin. It is proposed that the amphibian peptides inhibit nNOS by interacting with Ca(2+)calmodulin, and as a consequence, blocks the attachment of this protein to the calmodulin domain of nNOS.

Target-induced conformational adaptation of calmodulin revealed by the crystal structure of a complex with nematode Ca(2+)/calmodulin-dependent kinase kinase peptide

Calmodulin (CaM) is a ubiquitous calcium (Ca(2+)) sensor which binds and regulates protein serine/threonine kinases along with many other proteins in a Ca(2+)-dependent manner. For this multi-functionality, conformational plasticity is essential; however, the nature and magnitude of CaM's plasticity still remains largely undetermined. Here, we present the 1.8 A resolution crystal structure of Ca(2+)/CaM, complexed with the 27-residue synthetic peptide corresponding to the CaM-binding domain of the nematode Caenorhabditis elegans Ca(2+)/CaM-dependent kinase kinase (CaMKK). The peptide bound in this crystal structure is a homologue of the previously NMR-derived complex with rat CaMKK, but benefits from improved structural resolution. Careful comparison of the present structure to previous crystal structures of CaM complexed with unrelated peptides derived from myosin light chain kinase and CaM kinase II, allow a quantitative analysis of the differences in the relative orientation of the N and C-terminal domains of CaM, defined as a screw axis rotation angle ranging from 156 degrees to 196 degrees. The principal differences in CaM interaction with various peptides are associated with the N-terminal domain of CaM. Unlike the C-terminal domain, which remains unchanged internally, the N-terminal domain of CaM displays significant differences in the EF-hand helix orientation between this and other CaM structures. Three hydrogen bonds between CaM and the peptide (E87-R336, E87-T339 and K75-T339) along with two salt bridges (E11-R349 and E114-K334) are the most probable determinants for the binding direction of the CaMKK peptide to CaM.