P22 tailspike folding mutants revisited: effects on the thermodynamic stability of the isolated beta-helix domain

The Right-Handed Parallel β-Helix Topology of Erwinia chrysanthemi Pectin Methylesterase Is Intimately Associated with Both Sequential Folding and Resistance to High Pressure

The complex topologies of large multi-domain globular proteins make the study of their folding and assembly particularly demanding. It is often characterized by complex kinetics and undesired side reactions, such as aggregation. The structural simplicity of tandem-repeat proteins, which are characterized by the repetition of a basic structural motif and are stabilized exclusively by sequentially localized contacts, has provided opportunities for dissecting their folding landscapes. In this study, we focus on the Erwinia chrysanthemi pectin methylesterase (342 residues), an all-β pectinolytic enzyme with a right-handed parallel β-helix structure. Chemicals and pressure were chosen as denaturants and a variety of optical techniques were used in conjunction with stopped-flow equipment to investigate the folding mechanism of the enzyme at 25 °C. Under equilibrium conditions, both chemical- and pressure-induced unfolding show two-state transitions, with average conformational stability (ΔG° = 35 ± 5 kJ·mol⁻¹) but exceptionally high resistance to pressure (P_m = 800 ± 7 MPa). Stopped-flow kinetic experiments revealed a very rapid (τ < 1 ms) hydrophobic collapse accompanied by the formation of an extended secondary structure but did not reveal stable tertiary contacts. This is followed by three distinct cooperative phases and the significant population of two intermediate species. The kinetics followed by intrinsic fluorescence shows a lag phase, strongly indicating that these intermediates are productive species on a sequential folding pathway, for which we propose a plausible model. These combined data demonstrate that even a large repeat protein can fold in a highly cooperative manner.

Slow formation of aggregation-resistant beta-sheet folding intermediates

Protein folding has been studied extensively for decades, yet our ability to predict how proteins reach their native state from a mechanistic perspective is still rudimentary at best, limiting our understanding of folding-related processes in vivo and our ability to manipulate proteins in vitro. Here, we investigate the in vitro refolding mechanism of a large beta-helix protein, pertactin, which has an extended, elongated shape. At 55 kDa, this single domain, all-beta-sheet protein allows detailed analysis of the formation of beta-sheet structure in larger proteins. Using a combination of fluorescence and far-UV circular dichroism spectroscopy, we show that the pertactin beta-helix refolds remarkably slowly, with multiexponential kinetics. Surprisingly, despite the slow refolding rates, large size, and beta-sheet-rich topology, pertactin refolding is reversible and not complicated by off-pathway aggregation. The slow pertactin refolding rate is not limited by proline isomerization, and 30% of secondary structure formation occurs within the rate-limiting step. Furthermore, site-specific labeling experiments indicate that the beta-helix refolds in a multistep but concerted process involving the entire protein, rather than via initial formation of the stable core substructure observed in equilibrium titrations. Hence pertactin provides a valuable system for studying the refolding properties of larger, beta-sheet-rich proteins, and raises intriguing questions regarding the prevention of aggregation during the prolonged population of partially folded, beta-sheet-rich refolding intermediates. Proteins 2010. (c) 2009 Wiley-Liss, Inc.

Invivo folding efficiencies for mutants of the P22 tailspike beta-helix protein correlate with predicted stability changes

Parallel beta-helices are among the simplest repetitive structural elements in proteins. The folding behavior of beta-helix proteins has been studied intensively, also to gain insight on the formation of amyloid fibrils, which share the parallel beta-helix as a central structural motif. An important system for investigating beta-helix folding is the tailspike protein from the Salmonella bacteriophage P22. The central domain of this protein is a right-handed parallel beta-helix with 13 windings. Extensive mutational analyses of the P22 tailspike protein have revealed two main phenotypes: temperature-sensitive-folding (tsf) mutations that reduce the folding efficiency at elevated temperatures, and global suppressor (su) mutations that increase the tailspike folding efficiency. A central question is whether these phenotypes can be understood from changes in the protein stability induced by the mutations. Experimental determination of the protein stability is complicated by the nearly irreversible trimerization of the folded tailspike protein. Here, we present calculations of stability changes with the program FoldX, focusing on a recently published extensive data set of 145 singe-residue alanine mutants. We find that the calculated stability changes are correlated with the experimentally measured invivo folding efficiencies. In addition, we determine the free-energy landscape of the P22 tailspike protein in a nucleation-propagation model to explore the folding mechanism of this protein, and obtain a processive folding route on which the protein nucleates in the N-terminal region of the helix.

Chemical chaperone-mediated protein folding: stabilization of P22 tailspike folding intermediates by glycerol

Polyol co-solvents such as glycerol increase the thermal stability of proteins. This has been explained by preferential hydration favoring the more compact native over the denatured state. Although polyols are also expected to favor aggregation by the same mechanism, they have been found to increase the folding yields of some large, aggregation-prone proteins. We have used the homotrimeric phage P22 tailspike protein to investigate the origin of this effect. The folding of this protein is temperature-sensitive and limited by the stability of monomeric folding intermediates. At non-permissive temperature (≥35°C), tailspike refolding yields were increased significantly in the presence of 1–4 mglycerol. At low temperature, tailspike refolding is prevented when folding intermediates are destabilized by the addition of urea. Glycerol could offset the urea effect, suggesting that the polyol acts by stabilizing crucial folding intermediates and not by increasing solvent viscosity. The stabilization effect of glycerol on tailspike folding intermediates was confirmed in experiments using a temperature-sensitive folding mutant protein, by fluorescence measurements of subunit folding kinetics, and by temperature up-shift experiments. Our results suggest that the chemical chaperone effect of polyols observed in the folding of large proteins is due to preferential hydration favoring structure formation in folding intermediates.

GroEL/S substrate specificity based on substrate unfolding propensity

Phage P22 wild-type (WT) coat protein does not require GroEL/S to fold but temperature-sensitive-folding (tsf) coat proteins need the chaperone complex for correct folding. WT coat protein and all variants absolutely require P22 scaffolding protein, an assembly chaperone, to assemble into precursor structures termed procapsids. Previously, we showed that a global suppressor (su) substitution, T1661, which rescues several tsf coat protein variants, functioned by inducing GroEL/S. This led to an increased formation of tsf:T1661 coat protein:GroEL complexes compared with the tsf parents. The increased concentration of complexes resulted in more assembly-competent coat proteins because of a shift in the chaperone-driven kinetic partitioning between aggregation-prone intermediates toward correct folding and assembly. We have now investigated the folding and assembly of coat protein variants that carry a different global su substitution, F170L. By monitoring levels of phage production in the presence of a dysfunctional GroEL we found that tsf:F170L proteins demonstrate a less stringent requirement for GroEL. Tsf:F170L proteins also did not cause induction of the chaperones. Circular dichroism and tryptophan fluorescence indicate that the native state of the tsf: F170L coat proteins is restored to WT-like values. In addition, native acrylamide gel electrophoresis shows a stabilized native state for tsf:F170L coat proteins. The F170L su substitution also increases procapsid production compared with their tsf parents. We propose that the F170L su substitution has a decreased requirement for the chaperones GroEL and GroES as a result of restoring the tsf coat proteins to a WT-like state. Our data also suggest that GroEL/S can be induced by increasing the population of unfolding intermediates.

An elongated spine of buried core residues necessary for in vivo folding of the parallel beta-helix of P22 tailspike adhesin

The parallel beta-helix is an elongated beta-sheet protein domain associated with microbial virulence factors, toxins, viral adhesins, and allergens. Long stacks of similar, buried residues are a prominent feature of this fold, as well as the polypeptide chain fold of an amyloid structure. The 13-rung, right-handed, parallel beta-helix of the homotrimeric P22 tailspike adhesin exhibits predominantly hydrophobic stacks. The role of these stacked residues in the folding and stabilization of the protein is unclear. Through scanning alanine mutagenesis we have identified a folding spine of stacked residues in continuous contact along the length of P22 tailspike's beta-helix domain that is necessary for folding within cells. Nearly all chains carrying alanine substitutions of the 103 buried nonalanines were defective in folding in vivo at 37 degrees C. However, the majority of these chains successfully reached a native state, stable to >80 degrees C, when folded inside cells at low temperatures. Thus, nearly the entire buried core was critical for in vivo beta-helix folding but negligible for stability. Folding at 18 degrees C revealed the minimal folding spine of 29 nonglycine stack positions that were intolerant to alanine substitution. These results indicate that a processive folding mechanism, dependent on stacking contacts, controls beta-helix formation. Such a stepwise folding pathway offers a new target for drug design against this class of microbial virulence factors.

Stalled folding mutants in the triple beta-helix domain of the phage P22 tailspike adhesin

The trimeric bacteriophage P22 tailspike adhesin exhibits a domain in which three extended strands intertwine, forming a single turn of a triple beta-helix. This domain contains a single hydrophobic core composed of residues contributed by each of the three sister polypeptide chains. The triple beta-helix functions as a molecular clamp, increasing the stability of this elongated structural protein. During folding of the tailspike protein, the last precursor before the native state is a partially folded trimeric intermediate called the protrimer. The transition from the protrimer to the native state results in a structure that is resistant to denaturation by heat, chemical denaturants, and proteases. Random mutations were made in the region encoding residues 540-548, where the sister chains begin to wrap around each other. From a set of 26 unique single amino acid substitutions, we characterized mutations at G546, N547, and I548 that retarded or blocked the protrimer to native trimer transition. In contrast, many non-conservative substitutions were tolerated at residues 540-544. Sucrose gradient analysis showed that protrimer-like mutants had reduced sedimentation, 8.0 S to 8.3 S versus 9.3 S for the native trimer. Mutants affected in the protrimer to native trimer transition were also destabilized in their native state. These data suggest that the folding of the triple beta-helix domain drives transition of the protrimer to the native state and is accompanied by a major rearrangement of polypeptide chains.

A second-site suppressor of a folding defect functions via interactions with a chaperone network to improve folding and assembly in vivo

Single amino acid substitutions in a protein can cause misfolding and aggregation to occur. Protein misfolding can be rescued by second-site amino acid substitutions called suppressor substitutions (su), commonly through stabilizing the native state of the protein or by increasing the rate of folding. Here we report evidence that su substitutions that rescue bacteriophage P22 temperature-sensitive-folding (tsf) coat protein variants function in a novel way. The ability of tsf:su coat proteins to fold and assemble under a variety of cellular conditions was determined by monitoring levels of phage production. The tsf:su coat proteins were found to more effectively utilize P22 scaffolding protein, an assembly chaperone, as compared with their tsf parents. Phage-infected cells were radioactively labelled to quantify the associations between coat protein variants and folding and assembly chaperones. Phage carrying the tsf:su coat proteins induced more GroEL and GroES, and increased formation of protein:chaperone complexes as compared with their tsf parents. We propose that the su substitutions result in coat proteins that are more assembly competent in vivo because of a chaperone-driven kinetic partitioning between aggregation-prone intermediates and the final assembled state. Through more proficient use of this chaperone network, the su substitutions exhibit a novel means of suppression of a folding defect.

Buried hydrophobic side-chains essential for the folding of the parallel beta-helix domains of the P22 tailspike

The processive beta-strands and turns of a polypeptide parallel beta-helix represent one of the topologically simplest beta-sheet folds. The three subunits of the tailspike adhesin of phage P22 each contain 13 rungs of a parallel beta-helix followed by an interdigitated section of triple-stranded beta-helix. Long stacks of hydrophobic residues dominate the elongated buried core of these two beta-helix domains and extend into the core of the contiguous triple beta-prism domain. To test whether these side-chain stacks represent essential residues for driving the chain into the correct fold, each of three stacked phenylalanine residues within the buried core were substituted with less bulky amino acids. The mutant chains with alanine in place of phenylalanine were defective in intracellular folding. The chains accumulated exclusively in the aggregated inclusion body state regardless of temperature of folding. These severe folding defects indicate that the stacked phenylalanine residues are essential for correct parallel beta-helix folding. Replacement of the same phenylalanine residues with valine or leucine also impaired folding in vivo, but with less severity. Mutants were also constructed in a second buried stack that extends into the intertwined triple-stranded beta-helix and contiguous beta-prism regions of the protein. These mutants exhibited severe defects in later stages of chain folding or assembly, accumulating as misfolded but soluble multimeric species. The results indicate that the formation of the buried hydrophobic stacks is critical for the correct folding of the parallel beta-helix, triple-stranded beta-helix, and beta-prism domains in the tailspike protein.

Design of temperature-sensitive mutants solely from amino acid sequence

Temperature-sensitive (Ts) mutants are a powerful tool with which to study gene function in vivo. Ts mutants are typically generated by random mutagenesis followed by laborious screening procedures. By using the Escherichia coli cytotoxin CcdB as a model system, simple procedures for generating Ts mutants at high frequency through site-directed mutagenesis were developed. Putative buried, hydrophobic residues are selected through analysis of the protein sequence. Residue burial is confirmed by ensuring that substitution of the residue by Asp leads to protein inactivation. At such sites, a Ts phenotype can typically be generated either by (i) substitution of two predicted, buried residues with the 18 remaining amino acids or (ii) introduction of Lys, Ser, Ala, and Trp at three to four predicted buried sites. By using these design strategies, 17 tight Ts mutants of CcdB were isolated at four predicted buried sites. The rules were further verified by making several Ts mutants of yeast Gal4 at residues 68, 69, and 70. No Ts mutants of either protein have been previously reported. Such Ts mutants of Gal4 can be used for conditional expression of a variety of genes by using the well characterized upstream-activating-sequence-Gal4 system.

Evidence for assembly of prions with left-handed beta-helices into trimers

Studies using low-resolution fiber diffraction, electron microscopy, and atomic force microscopy on various amyloid fibrils indicate that the misfolded conformers must be modular, compact, and adopt a cross-beta structure. In an earlier study, we used electron crystallography to delineate molecular models of the N-terminally truncated, disease-causing isoform (PrP(Sc)) of the prion protein, designated PrP 27-30, which polymerizes into amyloid fibrils, but we were unable to choose between a trimeric or hexameric arrangement of right- or left-handed beta-helical models. From a study of 119 all-beta folds observed in globular proteins, we have now determined that, if PrP(Sc) follows a known protein fold, it adopts either a beta-sandwich or parallel beta-helical architecture. With increasing evidence arguing for a parallel beta-sheet organization in amyloids, we contend that the sequence of PrP is compatible with a parallel left-handed beta-helical fold. Left-handed beta-helices readily form trimers, providing a natural template for a trimeric model of PrP(Sc). This trimeric model accommodates the PrP sequence from residues 89-175 in a beta-helical conformation with the C terminus (residues 176-227), retaining the disulfide-linked alpha-helical conformation observed in the normal cellular isoform. In addition, the proposed model matches the structural constraints of the PrP 27-30 crystals, positioning residues 141-176 and the N-linked sugars appropriately. Our parallel left-handed beta-helical model provides a coherent framework that is consistent with many structural, biochemical, immunological, and propagation features of prions. Moreover, the parallel left-handed beta-helical model for PrP(Sc) may provide important clues to the structure of filaments found in some other neurodegenerative diseases.

Destabilizing mutations promote membrane protein misfolding

In this work, the relationship between stability and propensity to misfold was probed for a series of purified variants of the polytopic integral membrane protein diacylglycerol kinase. It was observed that there was a strong correlation between stability and folding efficiency. The most common mutations that promoted misfolding were those which also destabilized the protein. These results imply that by targeting unstable membrane proteins for degradation, cellular protein folding quality control can eliminate proteins that have a high intrinsic propensity to misfold into aberrant structures. Moreover, the more rare class of amino acid mutations that promote misfolding without perturbing stability may be particularly dangerous because the mutant proteins may evade the surveillance of cellular quality control systems.

A concerted mechanism for the suppression of a folding defect through interactions with chaperones

Specific amino acid substitutions confer a temperature-sensitive-folding (tsf) phenotype to bacteriophage P22 coat protein. Additional amino acid substitutions, called suppressor substitutions (su), relieve the tsf phenotype. These su substitutions are proposed to increase the efficiency of procapsid assembly, favoring correct folding over improper aggregation. Our recent studies indicate that the molecular chaperones GroEL/ES are more effectively recruited in vivo for the folding of tsf:su coat proteins than their tsf parents. Here, the tsf:su coat proteins are studied with in vitro equilibrium and kinetic techniques to establish a molecular basis for suppression. The tsf:su coat proteins were monomeric, as determined by velocity sedimentation analytical ultracentrifugation. The stability of the tsf:su coat proteins was ascertained by equilibrium urea titrations, which were best described by a three-state folding model, N <--> I <--> U. The tsf:su coat proteins either had stabilized native or intermediate states as compared with their tsf coat protein parents. The kinetics of the I <--> U transition showed a decrease in the rate of unfolding and a small increase in the rate of refolding, thereby increasing the population of the intermediate state. The increased intermediate population may be the reason the tsf:su coat proteins are aggregation-prone and likely enhances GroEL-ES interactions. The N --> I unfolding rate was slower for the tsf:su proteins than their tsf coat parents, resulting in an increase in the native state population, which may allow more competent interactions with scaffolding protein, an assembly chaperone. Thus, the suppressor substitution likely improves folding in vivo through increased efficiency of coat protein-chaperone interactions.

C-terminal hydrophobic interactions play a critical role in oligomeric assembly of the P22 tailspike trimer

The tailspike protein from the bacteriophage P22 is a well characterized model system for folding and assembly of multimeric proteins. Folding intermediates from both the in vivo and in vitro pathways have been identified, and both the initial folding steps and the protrimer-to-trimer transition have been well studied. In contrast, there has been little experimental evidence to describe the assembly of the protrimer. Previous results indicated that the C terminus plays a critical role in the overall stability of the P22 tailspike protein. Here, we present evidence that the C terminus is also the critical assembly point for trimer assembly. Three truncations of the full-length tailspike protein, TSPDeltaN, TSPDeltaC, and TSPDeltaNC, were generated and tested for their ability to form mixed trimer species. TSPDeltaN forms mixed trimers with full-length P22 tailspike, but TSPDeltaC and TSPDeltaNC are incapable of forming similar mixed trimer species. In addition, mutations in the hydrophobic core of the C terminus were unable to form trimer in vivo. Finally, the hydrophobic-binding dye ANS inhibits the formation of trimer by inhibiting progression through the folding pathway. Taken together, these results suggest that hydrophobic interactions between C-terminal regions of P22 tailspike monomers play a critical role in the assembly of the P22 tailspike trimer.

The interdigitated beta-helix domain of the P22 tailspike protein acts as a molecular clamp in trimer stabilization

The P22 tailspike adhesin is an elongated thermostable trimer resistant to protease digestion and to denaturation in sodium dodecyl sulfate. Monomeric, dimeric, and protrimeric folding and assembly intermediates lack this stability and are thermolabile. In the native trimer, three right-handed parallel beta-helices (residues 143-540), pack side-by-side around the three-fold axis. After residue 540, these single chain beta-helices terminate and residues 541-567 of the three polypeptide chains wrap around each other to form a three-stranded interdigitated beta-helix. Three mutants located in this region -- G546D, R563Q, and A575T -- blocked formation of native tailspike trimers, and accumulated soluble forms of the mutant polypeptide chains within cells. The substitutions R563Q and A575T appeared to prevent stable association of partially folded monomers. G546D, in the interdigitated region of the chain, blocked tailspike folding at the transition from the partially-folded protrimer to the native trimer. The protrimer-like species accumulating in the G546D mutant melted out at 42 degrees C and was trypsin and SDS sensitive. The G546D defect was not corrected by introduction of global suppressor mutations, which correct kinetic defects in beta-helix folding. The simplest interpretation of these results is that the very high thermostability (T(m) = 88 degrees C), protease and detergent resistance of the native tailspike acquired in the protrimer-to-trimer transition, depends on the formation of the three-stranded interdigitated region. This interdigitated beta-helix appears to function as a molecular clamp insuring thermostable subunit association in the native trimer.

Biological significance of a small highly conserved region in the N terminus of the p53 tumour suppressor protein

The p53 tumour suppressor protein plays a central role in maintaining genomic integrity in eukaryotic cells. The most significant biological function of p53 is to act as a sequence-specific DNA-binding transcription factor, which can induce the expression of a variety of target genes in response to diverse stress stimuli. The p53 protein contains six highly conserved regions, one of which, termed Box I, is located in the N-terminal transactivation domain (amino acid residues 13 and 26). The second half of the Box I region is crucial for the interaction with the basal transcription machinery and is thus required for p53's activity as a transcription factor. The same region also binds to Mdm2. Since p53 is targeted by Mdm2 for ubiquitin-mediated proteasome-dependent degradation, this region is also essential for the regulation of p53's stability in response to stress signals. Although the first half of Box I is highly conserved, its biological function is not clearly defined. The aim of this study was to characterise this conserved region and investigate its role in the biological functions of p53. We have generated short deletions and point mutations within this region and analysed their effect on p53 function and regulation. Biochemical analyses demonstrate that deletion of residues 13 to 16 significantly increases both the transcriptional transactivation and G(2) arrest-inducing activities of murine p53. Residues 13 to 16 appear to function as a regulatory element in p53, modulating p53-dependent transcriptional transactivation and cell-cycle arrest, possibly by affecting the structural stability of the core domain of the protein. In support of this, the deletion was found to induce second-site reversion of the Val135 temperature-sensitive mutant of murine p53.

The architecture of parallel beta-helices and related folds

Three-dimensional structures have been determined of a large number of proteins characterized by a repetitive fold where each of the repeats (coils) supplies a strand to one or more parallel beta-sheets. Some of these proteins form superfamilies of proteins, which have probably arisen by divergent evolution from a common ancestor. The classical example is the family including four families of pectinases without obviously related primary sequences, the phage P22 tailspike endorhamnosidase, chrondroitinase B and possibly pertactin from Bordetella pertusis. These show extensive stacking of similar residues to give aliphatic, aromatic and polar stacks such as the asparagine ladder. This suggests that coils can be added or removed by duplication or deletion of the DNA corresponding to one or more coils and explains how homologous proteins can have different numbers of coils. This process can also account for the evolution of other families of proteins such as the beta-rolls, the leucine-rich repeat proteins, the hexapeptide repeat family, two separate families of beta-helical antifreeze proteins and the spiral folds. These families need not be related to each other but will share features such as relative untwisted beta-sheets, stacking of similar residues and turns between beta-strands of approximately 90 degrees often stabilized by hydrogen bonding along the direction of the parallel beta-helix.Repetitive folds present special problems in the comparison of structures but offer attractive targets for structure prediction. The stacking of similar residues on a flat parallel beta-sheet may account for the formation of amyloid with beta-strands at right-angles to the fibril axis from many unrelated peptides.

Trans-suppression of misfolding in an amyloid disease

The transthyretin (TTR) amyloid diseases, representative of numerous misfolding disorders, are of considerable interest because there are mutations that cause or suppress disease. The Val30 --> Met30 (V30M) TTR mutation is the most prevalent cause of familial amyloid polyneuropathy in heterozygotes, whereas a Thr119 --> Met119 (T119M) mutation on the second TTR allele protects V30M carriers from disease. Here, we show that the incorporation of one or more T119M TTR subunits into a predominantly V30M tetramer strongly stabilized the mixed tetramer against dissociation. Dissociation is required for amyloid formation, so these findings provide a molecular explanation for intragenic trans-suppression of amyloidosis. The data also suggest a potential therapeutic strategy, provide insight into tissue-specific deposition and amyloid composition, and support the validity of the amyloid hypothesis in human disease.

Alleviation of a defect in protein folding by increasing the rate of subunit assembly

Understanding the nature of protein grammar is critical because amino acid substitutions in some proteins cause misfolding and aggregation of the mutant protein resulting in a disease state. Amino acid substitutions in phage P22 coat protein, known as tsf (temperature-sensitive folding) mutations, cause folding defects that result in aggregation at high temperatures. We have isolated global su (suppressor) amino acid substitutions that alleviate the tsf phenotype in coat protein (Aramli, L. A., and Teschke, C. M. (1999) J. Biol. Chem. 274, 22217-22224). Unexpectedly, we found that a global su amino acid substitution in tsf coat proteins made aggregation worse and that the tsf phenotype was suppressed by increasing the rate of subunit assembly, thereby decreasing the concentration of aggregation-prone folding intermediates.

Stability engineering of antibody single-chain Fv fragments

The application of single-chain Fv fragments (scFv) in medicine and biotechnology places great demands on their stability. Only recently has attention been given to the production of highly stable scFvs, and in a number of examples it was found that such fragments indeed perform better during practical applications. The structural parameters influencing scFv stability are now beginning to be elucidated. This review summarizes progress in rational and evolutionary engineering methods, the structural implications of these results, as well as some examples where stability engineering has been successfully applied.

The stability, structural organization, and denaturation of pectate lyase C, a parallel beta-helix protein

Pectate lyase C (pelC) was the first protein in which the parallel beta-helix structure was recognized. The unique features of parallel beta-helix-containing proteins-a relatively simple topology and unusual interactions among side chains-make pelC an interesting protein to study with respect to protein folding. In this paper, we report studies of the unfolding equilibrium of pelC. PelC is unfolded reversibly by gdn-HCl at pH 7 and 5, as monitored by far- and near-UV CD and fluorescence. The coincidence of these spectroscopically detected transitions is consistent with a two-state transition at pH 7, but the three probes are not coincident at pH 5. No evidence was found for a loosely folded intermediate in the transition region at pH 5. At pH 7, the for unfolding is 12.2 kcal/mol, with the midpoint of the transition at 0.99 M gdn-HCl and m = 12.3 kcal/(mol.M). Thus, pelC is unusually stable and has an m value that is much larger than for typical globular proteins. Thermal denaturation of pelC has been studied by differential scanning calorimetry (DSC) and by CD. Although thermal denaturation is not reversible, valid thermodynamic data can be obtained for the unfolding transition. DeltaH(van't Hoff)/DeltaH(cal) is less than 1 for pHs between 5 and 8, with a maximum value of 0.91 at pH 7 decreasing to 0.85 at pH 8 and to 0.68 at pH 5. At all pHs studied, the excess heat capacity can be deconvoluted into two components corresponding to two-state transitions that are nearly coincident at pH 7, but deviate more at higher and lower pH. Thus, pelC appears to consist of two domains that interact strongly and unfold in a cooperative fashion at pH 7, but the cooperativity decreases at higher and lower pH. The crystal structure of pelC shows no obvious domain structure, however.

Folding defects caused by single amino acid substitutions in a subunit are not alleviated by assembly

Significant stabilization of a protein often occurs when it is assembled into an oligomer. Bacteriophage P22 contains 420 monomers of coat protein that are stabilized by the assembly and maturation processes. The effects of eight single amino acid substitutions in coat protein that each cause a temperature-sensitive-folding defect were investigated to determine if the conformational differences previously observed in the monomers could be alleviated by assembly or maturation. Several techniques including differential scanning calorimetry, heat-induced expansion, urea denaturation, and sensitivity to protease digestion were used to explore the effects of the amino acid substitutions on the conformation of coat protein, once assembled. Each of the amino acid substitutions caused a change in the conformation as compared to wild-type coat protein, observed by at least one of the probes used. Thus, neither assembly nor expansion entirely corrected the conformational defects in the monomeric subunits of the folding mutants.

Mutations improving the folding of phage P22 tailspike protein affect its receptor binding activity

Four previously isolated mutations in Salmonella phage P22 tailspike protein were used to study the relationship between protein stability, folding, and function. Tailspike protein binds and hydrolyzes the repetitive O-antigen structure in Salmonella lipopolysaccharide. Four mutations (V331G, V331A, A334V, A334I) are known to increase the folding efficiency, and two of them (at position 331) also increase the thermal stability of the protein. Octasaccharides comprising two repeating units of the O-antigens from two different Salmonella strains were employed to analyze the receptor binding function of the mutant proteins. Their endorhamnosidase enzymatic activity was assayed with the aid of a fluorescence-labeled dodecasaccharide. Both V331A and V331G were found to strongly affect O-antigen binding. Octasaccharide binding affinities of the mutant proteins are reduced tenfold and 200-fold, corresponding to a loss of 17% and 36% of the standard free energy of binding, respectively. Both mutations at position 334 affected O-antigen binding only slightly (DeltaDeltaG(0)B approximately 1 kJ/mol), but these mutations reduce the thermal stability of the protein. The observed effects on the endoglycosidase activity are fully explained by the changes in substrate binding, suggesting that neither of the mutations affect the catalytic rate. Crystal structures of all four mutants were determined to a resolution of 2.0 A. Except for the partly or completely missing side-chain, no significant changes compared to the wild-type protein structure were found for the mutants at position 331, whereas a small but significant backbone displacement around the mutation site in A334V and A334I may explain the observed thermal destabilization.

Single amino acid substitutions globally suppress the folding defects of temperature-sensitive folding mutants of phage P22 coat protein

The amino acid sequence of a polypeptide defines both the folding pathway and the final three-dimensional structure of a protein. Eighteen amino acid substitutions have been identified in bacteriophage P22 coat protein that are defective in folding and cause their folding intermediates to be substrates for GroEL and GroES. These temperature-sensitive folding (tsf) substitutions identify amino acids that are critical for directing the folding of coat protein. Additional amino acid residues that are critical to the folding process of P22 coat protein were identified by isolating second site suppressors of the tsf coat proteins. Suppressor substitutions isolated from the phage carrying the tsf coat protein substitutions included global suppressors, which are substitutions capable of alleviating the folding defects of numerous tsf coat protein mutants. In addition, potential global and site-specific suppressors were isolated, as well as a group of same site amino acid substitutions that had a less severe phenotype than the tsf parent. The global suppressors were located at positions 163, 166, and 170 in the coat protein sequence and were 8-190 amino acid residues away from the tsf parent. Although the folding of coat proteins with tsf amino acid substitutions was improved by the global suppressor substitutions, GroEL remained necessary for folding. Therefore, we believe that the global suppressor sites identify a region that is critical to the folding of coat protein.

Formation of fibrous aggregates from a non-native intermediate: the isolated P22 tailspike beta-helix domain

In the assembly pathway of the trimeric P22 tailspike protein, the protein conformation critical for the partitioning between productive folding and off-pathway aggregation is a monomeric folding intermediate. The central domain of tailspike, a large right-handed parallel beta-helix, is essentially structured in this species. We used the isolated beta-helix domain (Bhx), expressed with a hexahistidine tag, to investigate the mechanism of aggregation without the two terminal domains present in the complete protein. Although Bhx has been shown to fold reversibly at low ionic strength conditions, increased ionic strength induced aggregation with a maximum at urea concentrations corresponding to the midpoint of urea-induced folding transitions. According to size exclusion chromatography, aggregation appeared to proceed via a linear polymerization mechanism. Circular dichroism indicated a secondary structure content of the aggregates similar to that of the native state, but at the same time their tryptophan fluorescence was largely quenched. Microscopic analysis of the aggregates revealed a variety of morphologies; among others, fibrils with fine structure were observed that exhibited bright green birefringence if viewed under cross-polarized light after staining with Congo red. These observations, together with the effects of folding mutations on the aggregation process, indicate the involvement of a partially structured intermediate distinct from both unfolded and native Bhx.

There's a right way and a wrong way: in vivo and in vitro folding, misfolding and subunit assembly of the P22 tailspike

The in vivo and in vitro folding, assembly and misfolding of an elongated protein, the thermostable tailspike adhesin of phage P22, reveals important aspects of the sequence control of chain folding as well as its failure mode, inclusion body formation.

Folding and function of repetitive structure in the homotrimeric phage P22 tailspike protein

The Salmonella bacteriophage P22 recognizes its host cell receptor, lipopolysaccharide, by means of six tailspikes, thermostable homotrimers of 72-kDa polypeptides. Biophysical results on the binding reaction, together with high-resolution structural information from X-ray crystallography, have shed light on the interactions determining the viral host range. Folding and assembly of the tailspike protein in vitro have been analyzed in detail, and the data have been compared with observations on the in vivo assembly pathway. Repetitive structural elements in the tailspike protein, like a side-by-side trimer of parallel beta-helices, a parallel alpha-helical bundle, a triangular prism made up from antiparallel beta-sheets, and a short segment of a triple beta-helix can be considered building blocks for larger structural proteins, and thus, the results on P22 tailspike may have implications for fibrous protein structure and folding.