Application of Fmoc-SPPS, Thiol-Maleimide Conjugation, and Copper(I)-Catalyzed Alkyne-Azide Cycloaddition "Click" Reaction in the Synthesis of a Complex Peptide-Based Vaccine Candidate Against Group A Streptococcus

Evaluation of novel single-dose vaccine candidates against gonadotropin-releasing hormone (GnRH) in mice

Immunocontraceptive vaccines targeting gonadotropin-releasing hormone (GnRH) are in high demand for controlling population growth and managing the temperament of both wild and domesticated animals. Achieving adequate efficacy, especially with a single-dose immunization, requires potent vaccines and adjuvants. However, commercial vaccines face challenges: some, like Gonacon®, have regulatory issues with veterinary authorities, while others, like Bopriva®, lack potency and require multiple booster doses. Thus, there is a critical need for highly effective vaccines with robust adjuvants suitable for easy, less invasive single-dose administration. Recent studies have shown that peptide vaccines adjuvanted with 15-mer polyleucine (L15) or poly(methyl acrylate) (PMA) demonstrate potent immunogenicity, comparable to complete Freund's adjuvant (CFA), after a single dose against Streptococcus pyogenes. Our research aims to evaluate the performance of these promising vaccine adjuvant as single-dose contraceptive vaccines in mice, compared to well-established commercial and experimental adjuvants, such as AddaVax®, Incomplete Freunds Adjuvant (IFA), and CFA. To develop a vaccine with sufficient HLA coverage for cattle immunocontraception, we evaluated a peptide vaccine incorporating three cattle-compatible helper T cell epitopes. We evaluated the immunogenicity of constructs in mice to that of a construct with the universal mouse-compatible PADRE (P) helper T cell epitope. Various vaccines were prepared to investigate: (A) the impact of incorporating cattle-compatible helper T cells on immunogenicity, and (B) the effectiveness of different adjuvant systems compared to CFA. The vaccines were administered subcutaneously to C57BL/6 mice, and serological assays revealed that the L15/Quil A-based vaccine system was highly immunogenic, with performance comparable to CFA without the need for reactogenic mycobacterial components. Our vaccines significantly reduced serum progesterone levels in mice, making the L15/Quil A system a strong candidate for single-dose anti-fertility application, followed by PMA, and AddaVax® adjuvanted GnRH.

Evolution of branched peptides as novel biomaterials

Branched peptide-based materials draw inspiration from dendritic structures to emulate the complex architecture of native tissues, aiming to enhance the performance of biomaterials in medical applications. These innovative materials benefit from several key features: they exhibit slower degradation rates, greater stiffness, and the ability to self-assemble. These properties are crucial for maintaining the structural integrity and functionality of the materials over time. By integrating bioactive peptides and natural polymers within their branched frameworks, these materials offer modularity and tunability and can accommodate a range of mechanical properties, degradation rates, and biological functions making them suitable for biomedical applications, including drug delivery systems, wound healing scaffolds, and tissue engineering constructs. In drug delivery, these materials can be engineered to release therapeutic agents in a controlled manner, enhancing the efficacy and safety of treatments. In wound healing, they provide a supportive environment which promotes rapid and efficient tissue repair. The combination of biomimetic design and functional adaptability makes branched peptide-based materials a promising candidate for the development of next-generation biomaterials, paving the way for significant advancements in healthcare.

A synthetic cyclic peptide for promoting antigen presentation and immune activation

Cyclic peptides are often used as scaffolds for the multivalent presentation of drug molecules due to their structural stability and constrained conformation. We identified a cyclic deca-peptide incorporating lipoamino acids for delivering T helper and B cell epitopes against group A Streptococcus (GAS), eliciting robust humoral immune responses. In this study, we assessed the function-immunogenicity relationship of the multi-component vaccine candidate (referred to as VC-13) to elucidate a mechanism of action. We identified a potential universal delivery platform, not only capable of adjuvanting different peptide epitopes (e.g., NS1 and 88/30 from group A Streptococcus, gonadotropin hormone releasing hormone [GnRH]), but also protein antigens (e.g., bovine serum albumin [BSA], receptor binding domain (RBD) of the SARS-CoV-2 protein responsible for COVID-19 infection [SARS-CoV-2 RBD]) and small molecular haptens (e.g., cocaine). All vaccine candidates self-assembled into sub-500 nm nanoparticles and induced high antigen-specific systemic IgG titers and opsonic potential compared to the antigen co-administered with a commercial adjuvant, complete Freund's adjuvant. Notably, presence of the cyclic decapeptide in this vaccine increased accumulation in the draining inguinal lymph nodes, facilitating cellular uptake of peptide antigens. Furthermore, the lipoamino acid promoted dendritic cell activation, acting as both toll-like receptors 2 and 4 -targeting moiety. Our study revealed the importance of the cyclic decapeptide and lipoamino acid presence in antigen presentation and immune response activation, leading onto the development of a fully synthetic, self-assembled, and promising platform for the delivery of subunit vaccines and anti-drug vaccines.

Self-assembled monovalent lipidated mannose ligand as a standalone nanoadjuvant

Subunit vaccines require an immunostimulant (adjuvant) and/or delivery system to induce immunity. However, currently, available adjuvants are either too dangerous in terms of side effects for human use (experimental adjuvants) or have limited efficacy and applicability. In this study, we examined the capacity of mannose-lipopeptide ligands to enhance the immunogenicity of a vaccine consisting of polyleucine(L15)-antigen conjugates anchored to liposomes. The clinically tested Group A Streptococcus (GAS) B-cell epitope, J8, combined with universal T helper PADRE (P) was used as the antigen. Six distinct mannose ligands were incorporated into neutral liposomes carrying L15PJ8. While induced antibody titers were relatively low, the ligand carrying mannose, glycine/lysine spacer, and two palmitic acids as liposomal membrane anchoring moieties (ligand 3), induced significantly higher IgG titers than non-mannosylated liposomes. The IgG titers were significantly enhanced when positively charged liposomes were employed. Importantly, the produced antibodies were able to kill GAS bacteria. Unexpectedly, the physical mixture of only ligand 3 and PJ8 produced self-assembled nanorods that induced antibody titers as high as those elicited by the lead liposomal formulation and antigen adjuvanted with the potent, but toxic, complete Freund's adjuvant (CFA). Antibodies produced upon immunization with PJ8 + 3 were even more opsonic than those induced by CFA + PJ8. Importantly, in contrast to CFA, ligand 3 did not induce observable adverse reactions or excessive inflammatory responses. Thus, we demonstrated that a mannose ligand, alone, can serve as an effective vaccine nanoadjuvant.

Cholesterol as an inbuilt immunoadjuvant for a lipopeptide vaccine against group A Streptococcus infection

Peptide-based vaccines can trigger highly specific immune responses, although peptides alone are usually unable to confer strong humoral or cellular immunity. Consequently, peptide antigens are administered with immunostimulatory adjuvants, but only a few are safe and effective for human use. To overcome this obstacle, herein a peptide antigen was lipidated to effectively anchor it to liposomes and emulsion. A peptide antigen B cell epitope from Group A Streptococcus M protein was conjugated to a universal T helper epitope, the pan DR-biding epitope (PADRE), alongside a lipidic moiety cholesterol. Compared to a free peptide antigen, the lipidated version (LP1) adopted a helical conformation and self-assembled into small nanoparticles. Surprisingly, LP1 alone induced the same or higher antibody titers than liposomes or emulsion-based formulations. In addition, antibodies produced by mice immunized with LP1 were more opsonic than those induced by administering the antigen with incomplete Freund's adjuvant. No side effects were observed in the immunized mice and no excessive inflammatory immune responses were detected. Overall, this study demonstrated how simple conjugation of cholesterol to a peptide antigen can produce a safe and efficacious vaccine against Group A Streptococcus - the leading cause of superficial infections and the bacteria responsible for deadly post-infection autoimmune disorders.

Poly(hydrophobic amino acid) Conjugates for the Delivery of Multiepitope Vaccine against Group A Streptococcus

Peptide-based vaccines are composed of small, defined, antigenic peptide epitopes. They are designed to induce well-controlled immune responses. Multiple epitopes are often employed in these vaccines to cover strain variability of a pathogen. However, peptide epitopes cannot stimulate adequate immune responses on their own and require an adjuvant (immune stimulant) and/or delivery system. Here, we designed and synthesized a multiepitope vaccine candidate against Group A Streptococcus (GAS) composed of several B-cell epitopes (J8, PL1, and 88/30) derived from GAS M-protein, universal PADRE T-helper cell epitope, and a polyleucine self-adjuvanting unit. The vaccine components were conjugated together (using mercapto-maleimide and azide-alkyne Huisgen cycloaddition reactions) or delivered as a mixture. The conjugated multiepitope vaccine candidate self-assembled into small nanoparticles and chain-like aggregated nanoparticles (CLANs) that were able to induce the production of J8-, PL1-, and 88/30-specific antibodies in mice. The multiepitope conjugate and the physical mixture of conjugates bearing the individual epitopes produced similar nanoparticles and induced comparable immune responses. Hence, simple physical mixing can replace complex chemical conjugation to produce multiepitope nanoparticles with equivalent morphology and immunological efficacy. This greatly simplifies vaccine production.

Polyacrylate-GnRH Peptide Conjugate as an Oral Contraceptive Vaccine Candidate

Contraceptive vaccines are designed to elicit immune responses against major components of animal reproductive systems. These vaccines, which are most commonly administered via injection, typically target gonadotropin-releasing hormone (GnRH). However, the need to restrain animals for treatment limits the field applications of injectable vaccines. Oral administration would broaden vaccine applicability. We explored contraceptive vaccine candidates composed of GnRH peptide hormone, universal T helper PADRE (P), and a poly(methylacrylate) (PMA)-based delivery system. When self-assembled into nanoparticles, PMA-P-GnRH induced the production of high IgG titers after subcutaneous and oral administration in mice. PADRE was then replaced with pig T helper derived from the swine flu virus, and the vaccine was tested in pigs. High levels of systemic antibodies were produced in pigs after both injection and oral administration of the vaccine. In conclusion, we developed a simple peptide–polymer conjugate that shows promise as an effective, adjuvant-free, oral GnRH-based contraceptive vaccine.

Chemical Conjugation Strategies for the Development of Protein-Based Subunit Nanovaccines

The production of subunit nanovaccines relies heavily on the development of a vaccine delivery system that is safe and efficient at delivering antigens to the target site. Nanoparticles have been extensively investigated for vaccine delivery over the years, as they often possess self-adjuvanting properties. The conjugation of antigens to nanoparticles by covalent bonds ensures co-delivery of these components to the same subset of immune cells in order to trigger the desired immune responses. Herein, we review covalent conjugation strategies for grafting protein or peptide antigens onto other molecules or nanoparticles to obtain subunit nanovaccines. We also discuss the advantages of chemical conjugation in developing these vaccines.

Opsonic Activity of Conservative Versus Variable Regions of the Group A Streptococcus M Protein

Group A Streptococcus (GAS) and GAS-associated infections are a global challenge, with no licensed GAS vaccine on the market. The GAS M protein is a critical virulence factor in the fight against GAS infection, and it has been a primary target for GAS vaccine development. Measuring functional opsonic antibodies against GAS is an important component in the clinical development path for effective vaccines. In this study, we compared the opsonic activity of two synthetic, self-adjuvanting subunit vaccines containing either the J8- or 88/30-epitope in Swiss outbred mice using intranasal administration. Following primary immunization and three boosts, sera were assessed for IgG activity using ELISA, and opsonization activity against seven randomly selected clinical isolates of GAS was measured. Vaccine constructs containing the conservative J8-epitope showed significant opsonic activity against six out of the seven GAS clinical isolates, while the vaccine containing the variable 88/30-epitope did not show any significant opsonic activity.