Toxicity of Metal Oxide Nanoparticles

Assessment of skin sensitization potential of zinc oxide, aluminum oxide, manganese oxide, and copper oxide nanoparticles through the local lymph node assay: 5-bromo-deoxyuridine flow cytometry method

The advent of nanotechnology has significantly spurred the utilization of nanoparticles (NPs) across diverse sectors encompassing industry, agriculture, engineering, cosmetics, and medicine. Metallic oxides including zinc oxide (ZnO), copper oxide (CuO), manganese oxide (Mn2O3), and aluminum oxide (Al2O3), in their NP forms, have become prevalent in cosmetics and various dermal products. Despite the expanding consideration of these compounds for dermal applications, their potential for initiating skin sensitization (SS) has not been comprehensively examined. An in vivo assay, local lymph node assay: 5-bromo-2-deoxyuridine-flow cytometry method (LLNA: BrdU-FCM) recognized as an alternative testing method for screening SS potential was used to address these issues. Following the OECD TG 442B guidelines, NPs suspensions smaller than 50 nm size were prepared for ZnO and Al2O3 at concentrations of 10, 25, and 50%, and Mn2O3 and CuO at concentrations of 5, 10, and 25%, and applied to the dorsum of each ear of female BALB/c mice on a daily basis for 3 consecutive days. Regarding the prediction of test substance to skin sensitizer if sensitization index (SI)≥2.7, all 4 NPs were classified as non-sensitizing. The SI values were below 2.06, 1.33, 1.42, and 0.99 for ZnO, Al2O3, Mn2O3, and CuO, respectively, at all test concentrations. Although data presented were negative with respect to adverse SS potential for these 4 NPs, further confirmatory tests addressing other key events associated with SS adverse outcome pathway need to be carried out to arrive at an acceptable conclusion on the skin safety for both cosmetic and dermal applications.

Nickel oxide nanoparticles: A new generation nanoparticles to combat bacteria Xanthomonas oryzae pv. oryzae and enhance rice plant growth

Recently, nanotechnology is among the most promising technologies used in all areas of research. The production of metal nanoparticles using plant parts has received significant attention for its environmental friendliness and effectiveness. Therefore, we investigated the possible applications of biological synthesized nickel oxide nanoparticles (NiONPs). In this study, NiONPs were synthesized through biological method using an aqueous extract of saffron stigmas (Crocus sativus L). The structure, morphology, purity, and physicochemical properties of the obtained NPs were confirmed through Scanning/Transmission Electron Microscopy attached with Energy Dispersive Spectrum, X-ray Diffraction, and Fourier transform infrared. The spherically shaped NiONPs were found by Debye Scherer's formula to have a mean dimension of 41.19 nm. The application of NiONPs in vitro at 50, 100, and 200 μg/mL, respectively, produced a clear region of 2.0, 2.2, and 2.5 cm. Treatment of Xoo cell with NiONPs reduced the growth and biofilm formation, respectively, by 88.68% and 83.69% at 200 μg/mL. Adding 200 μg/mL NiONPs into Xoo cells produced a significant amount of ROS in comparison with the control. Bacterial apoptosis increased dramatically from 1.05% (control) to 99.80% (200 μg/mL NiONPs). When compared to the control, rice plants treated with 200 μg/mL NiONPs significantly improved growth characteristics and biomass. Interestingly, the proportion of diseased leaf area in infected plants with Xoo treated with NiONPs reduced to 22% from 74% in diseased plants. Taken together, NiONPs demonstrates its effectiveness as a promising tool as a nano-bactericide in managing bacterial infection caused by Xoo.

Exploring the cytotoxicity mechanisms of copper ions and copper oxide nanoparticles in cells from the excretory system

Copper oxide nanoparticles (CuO NPs) are widely applied in various products, including food, cosmetic, biomedical, and environmental goods. Despite their broad use, potential risks are still associated with these NPs, therefore, the aim of this study is to delve deeper into the cytotoxic effects of 85 nm CuO NPs on kidney MDCK and liver AML-12 cells, representing cell models from the excretory system. Our findings pointed out that the viability of both cell lines decreased in a concentration-dependent manner when exposed to CuO NPs. Additionally, CuO NPs induced the overproduction of reactive oxygen species (ROS) and caused depolarization of the mitochondrial membrane, thereby arresting the cell cycle at the G2/M phase in MDCK and AML-12 cells. Importantly, unlike others our study uncovered distinctive forms of cellular death induced by CuO NPs in these cell lines. MDCK cells exhibited a combination of apoptosis and autophagy while early apoptosis was predominant in AML-12 cells. Moreover, the role of Cu2+ ions and CuO NPs in exerting cytotoxic effects was investigated, revealing that MDCK cells were affected by both copper ions and NPs. In contrast, AML-12 cells experienced toxic effects solely from CuO NPs. These findings provide crucial insights into the different cell death mechanisms caused either by CuO NPs or Cu2+ ions in excretory system cells in vitro. Nevertheless, further research is needed to explore the underlying mechanisms at the in vivo level, ensuring the safe use of CuO NPs. The results suggest that specific concentrations of metal oxide NPs can impact the physiology of cells within the excretory system of various mammals, including humans, and pave the way for comparing the toxic effects between ions and nanoparticles for further nanotoxicological studies.

Comparative toxicity assessment of individual, binary and ternary mixtures of SiO2, Fe3O4, and ZnO nanoparticles in freshwater microalgae, Scenedesmus obliquus: Exploring the role of dissolved ions

Metal oxide nanoparticles (NPs) are considered among the most prevalent engineered nanomaterials. To have a deeper understanding of the mode of action of multiple metal oxide nanoparticles in mixtures, we have used a unicellular freshwater microalga Scenedesmus obliquus as a model organism. The toxicity of silicon dioxide (SiO2), iron oxide (Fe3O4), and zinc oxide (ZnO) NPs was studied individually as well as in their binary (SiO2 + Fe3O4, Fe3O4 + ZnO, and ZnO + SiO2) and ternary (SiO2 + Fe3O4 + ZnO) combinations. The effects of metal ions from ZnO and Fe3O4 were investigated as well. The results observed from the study, showed that a significant amount of toxicity was contributed by the dissolved ions in the mixtures of the nanoparticles. Decreases in the cell viability, ROS generation, lipid peroxidation, antioxidant enzyme activity, and photosynthetic efficiency were analyzed. Among all the individual particles, ZnO NPs showed the maximum effects and increased the toxicities of the binary mixtures. The binary and ternary mixtures of the NPs clearly showed increased toxic effects in comparison with the individual entities. However, the ternary combination had lesser toxic effects than the binary combination of Fe3O4 + ZnO. The decline in cell viability and photosynthetic efficiency were strongly correlated with various oxidative stress biomarkers emphasizing the crucial role of reactive oxygen species in inducing the toxic effects. The findings from this study highlight the importance of evaluating the combinatorial effects of various metal oxide NPs as part of a comprehensive ecotoxicity assessment in freshwater microalgae.

Effectiveness of metal and metal oxide nanoparticles against bacterial biofilms: Perspectives and limitations

In the last few years, there has been a necessary demand in the pharmaceutical industries for finding a treatment against biofilms formed by different bacterial species. We are aware of the fact that classical processes, which are already there for the removal of bacterial biofilms gives a very low efficiency and consequently antimicrobial resistance makes it even worse. To cope up with the cited problems, scientists from the past few years are inclining toward various types of nanoparticle based treatment procedures as a pharmaceutical agent against bacterial biofilms. Nanoparticles are known for their extremely efficient antimicrobial properties. The current review gives a description of different types of metal oxide nanoparticles and their antibiofilm properties. It also shows a comparative analysis of the nanoparticles and depicts the efficiency rates of biofilm degradation in each of them. It explains the mechanism of the nanoparticles through which the disintegration of bacterial biofilm is carried out. Lastly, the review throws light upon the limitations of different nanoparticles, their safety issues, the mutagenicity, genotoxicity concerns, and toxicity hazards caused by them.

Applications of Gold and Silver Nanoparticles in Theranostics

Nanotechnology sculptures the current scenario of science and technology. The word nano refers 'small' which ranges from 10 to 100 nm in size. Silver and gold nanoparticles can be synthesized at nanoscale and have unique biological properties like antibacterial, antifungal, antiviral, antiparasitic, antiplatelet, anti-inflammatory, and anti-tumor activity. In this mini review, we shall discuss the various applications of silver and gold nanoparticles (AuNPs) in the field of therapy, imaging, biomedical devices and in cancer diagnosis. The usage of silver nanoparticles(AgNPs) in dentistry and dental implants, therapeutic abilities like wound dressings, silver impregnated catheters, ventricular drainage catheters, combating orthopedic infections, and osteointegration will be elaborated. Gold nanoparticles in recent years have garnered large importance in bio medical applications. They are being used in diagnosis and have recently seen a surge in therapeutics. In this mini review, we shall see about the various applications of AuNP and AgNP, and highlight their evolution in theranostics.

Genotoxicity evaluation of medical devices: A regulatory perspective

This review critically evaluates our current regulatory understanding of genotoxicity testing and risk assessment of medical devices. Genotoxicity risk assessment of these devices begins with the evaluation of materials of construction, manufacturing additives and all residual materials for potential to induce DNA damage. This is followed by extractable and/or leachable (E&L) studies to understand the worst case and/or clinical exposures, coupled with risk assessment of extractables or leachables. The TTC (Threshold of Toxicological Concern) approach is used to define acceptable levels of genotoxic chemicals, when identified. Where appropriate, in silico predictions may be used to evaluate the genotoxic potentials of identifiable chemicals with limited toxicological data and above the levels defined by TTC. Devices that could not be supported by E&L studies are evaluated by in vitro genotoxicity studies conducted in accordance with ISO10993-3 and 33. Certain endpoints such as 'site of contact genotoxicity' that are specific for certain classes of medical devices are currently not addressed in the current standards. The review also illustrates the potential uses of recent advances to achieve the goal of robust genotoxicity assessment of medical devices which are being increasingly used for health benefits. The review also highlights the gaps for genotoxicity risk assessment of medical devices and suggests possible approaches to address them taking into consideration the recent advances in genotoxicity testing including their potential uses in biocompatibility assessment.

Endolysin, a Promising Solution against Antimicrobial Resistance

Antimicrobial resistance (AMR) is a global crisis for human public health which threatens the effective prevention and control of ever-increasing infectious diseases. The advent of pandrug-resistant bacteria makes most, if not all, available antibiotics invalid. Meanwhile, the pipeline of novel antibiotics development stagnates, which prompts scientists and pharmacists to develop unconventional antimicrobials. Bacteriophage-derived endolysins are cell wall hydrolases which could hydrolyze the peptidoglycan layer from within and outside of bacterial pathogens. With high specificity, rapid action, high efficiency, and low risk of resistance development, endolysins are believed to be among the best alternative therapeutic agents to treat multidrug resistant (MDR) bacteria. As of now, endolysins have been applied to diverse aspects. In this review, we comprehensively introduce the structures and activities of endolysins and summarize the latest application progress of recombinant endolysins in the fields of medical treatment, pathogen diagnosis, food safety, and agriculture.

Ag-Doped and Antibiotic-Loaded Hexagonal Boron Nitride Nanoparticles as Promising Carriers to Fight Different Pathogens

Utilization of antibacterial components-conjugated nanoparticles (NPs) is emerging as an attractive strategy for combating various pathogens. Herein, we demonstrate that Ag/BN NPs and antibiotic-loaded BN and Ag/BN nanoconjugates are promising carriers to fight bacterial and fungal infections. Extensive biological tests included two types of Gram-positive methicillin-resistant Staphylococcus aureus strains (B8469 and MW2), two types of Gram-negative Pseudomonas aeruginosa strains (ATCC27853 and B1307/17), and 47 types of Escherichia coli strains (including 41 multidrug-resistant ones), as well as five types of fungal cultures: Candida albicans (candidiasis-thrush) ATCC90028 and ATCC24433, Candida parapsilosis ATCC90018, Candida auris CBS109113, and Neurospora crassa wt. We have demonstrated that, even within a single genus Escherichia, there are many hospital E. coli strains with multi-drug resistance to different antibiotics. Gentamicin-loaded BN NPs have high bactericidal activity against S. aureus, P. aeruginosa, and 38 types of the E. coli strains. For the rest of the tested E. coli strains, the Ag nanoparticle-containing nanohybrids have shown superior bactericidal efficiency. The Ag/BN nanohybrids and amphotericin B-loaded BN and Ag/BN NPs also reveal high fungicidal activity against C. albicans, C. auris, C. parapsilosis, and N. crassa cells. In addition, based on the density functional theory calculations, the nature of antibiotic-nanoparticle interaction, the sorption capacity of the BN and Ag/BN nanohybrids for gentamicin and amphotericin B, and the most energetically favorable positions of the drug molecules relative to the carrier surface, which lead to lowest binding energies, have been determined. The obtained results clearly show high therapeutic potential of the antibiotic-loaded Ag/BN nanocarriers providing a broad bactericidal and fungicidal protection against all of the studied pathogens.

An Overview of Nanoformulated Nutraceuticals and their Therapeutic Approaches

Background:

Economic development and vast changes in food habits have accelerated the consumption of junk foods, which are the leading causes of several disorders that turn the majority of the people to use various herbal formulations or drugs for preventing various lifestyle diseases. Nutraceuticals are the borderline apparatus between nutrients and drugs that provide supplementation of the particular nutrient with a favorable health effect.

Objective:

Various nutraceutical compounds like vitamins, spices, polyphenols, prebiotics, and probiotics in the form of powders, tablets, and capsules are currently marketed globally. Among them, previous literature have reported that polyphenols are the most promising compounds that have been proven to treat various chronic diseases like cancer, hypertension, diabetes mellitus (DM), osteoporosis, osteoarthritis, dyslipidemia, multiple sclerosis, congenital anomalies, Alzheimer’s disease, etc. It is warranted to discuss the benefits of nanoformulations of nutraceuticals.

Methods:

We have searched PubMed using the keywords nutraceuticals, nanoformulations, therapeutic approaches, bionanotechnology, and therapeutics. The relevant papers and classical papers in this field were selected to write this review.

Results and Discussion:

The different classifications of nutraceuticals were described in this review. The comparison between the different categories of nutraceuticals with their nanoformulated forms was made, explaining the benefits of nanoformulations regarding stability, bioavailability, enhanced anti-oxidant properties, etc. A glimpse of the drawbacks of nanoformulations was also included.

Conclusion:

The current review highlights an overview of various nanoformulated nutraceuticals and their approach towards the treatment of multiple diseases.

Sono-synthesis approach improves anticancer activity of ZnO nanoparticles: reactive oxygen species depletion for killing human osteosarcoma cells

Aim: To investigate the effect of ultrasound during the synthesis of ZnO nanoparticles (NPs) on their anticancer activity. Materials & methods: ZnO NPs were synthesized in the presence and absence of ultrasonic irradiation. Biological tests were performed on human osteosarcoma cancer cells (Saos-2). Results: The sono-synthesized sample indicated higher cytotoxicity than the conventional one. (IC₅₀ = 16.48 ± 0.41 μg/ml for sonochemical ZnO; 26.96 ± 0.33 μg/ml for conventional ZnO). Both sonochemical and conventional samples acted like antioxidants and reduced intracellular reactive oxygen species level. This reduction was more significant in cells treated with the sono-synthesized sample. The sono-synthesized ZnO NPs showed more tumor selectivity than the conventional sample. Conclusion: Sono-synthesis of ZnO NPs by a bath sonicator could improve their anticancer activity.

A Review on the Role of Nanosensors in Detecting Cellular miRNA Expression in Colorectal Cancer

BACKGROUND

Colorectal cancer (CRC) is one of the leading causes of death across the globe. Early diagnosis with high sensitivity can prevent CRC progression, thereby reducing the condition of metastasis.

OBJECTIVE

The purpose of this review is (i) to discuss miRNA based biomarkers responsible for CRC, (ii) to brief on the different methods used for the detection of miRNA in CRC, (iii) to discuss different nanobiosensors so far found for the accurate detection of miRNAs in CRC using spectrophotometric detection, piezoelectric detection.

METHODS

The keywords for the review like micro RNA detection in inflammation, colorectal cancer, nanotechnology, were searched in PubMed and the relevant papers on the topics of miRNA related to CRC, nanotechnology-based biosensors for miRNA detection were then sorted and used appropriately for writing the review.

RESULTS

The review comprises a general introduction explaining the current scenario of CRC, the biomarkers used for the detection of different cancers, especially CRC and the importance of nanotechnology and a general scheme of a biosensor. The further subsections discuss the mechanism of CRC progression, the role of miRNA in CRC progression and different nanotechnology-based biosensors so far investigated for miRNA detection in other diseases, cancer and CRC. A scheme depicting miRNA detection using gold nanoparticles (AuNPs) is also illustrated.

CONCLUSION

This review may give insight into the different nanostructures, like AuNPs, quantum dots, silver nanoparticles, MoS2derived nanoparticles, etc., based approaches for miRNA detection using biosensors.

Methods for Reducing the Toxicity of Metal and Metal Oxide NPs as Biomedicine

The rapid development of medicine has forced equally rapid progress in the field of pharmaceuticals. In connection with the expensive and time-consuming process of finding new drugs, great emphasis is put on the design and use of metal and metal oxides nanoparticles in nanomedicine. The main focus is on comprehensive presentation of both physicochemical properties and the possibilities of using, in particular, silver (Ag) and gold (Au) nanoparticles, as well as zinc oxide (ZnO) and titanium oxide (TiO2) nanoparticles as drug carriers and in the treatment of cancer. An important element of this subject is the possibility of occurrence of toxic effects of these nanoparticles. For this reason, possible mechanisms of toxic actions are presented, as well as methods used to reduce their toxicity to ensure the safety of drug carriers based on these nanostructures.

Comparative analysis of urban road dust compositions in relation to their potential human health impacts

This study investigated the chemical components of fine urban road dust from seven sampling sites, based on which we could predict potential human health effects. The elemental compositions, including the contents of metals and volatile or semivolatile organic compounds, were determined to establish comprehensive chemical profiles of solid road dust. The chemical profiles, consisting of C: H ratio, metal contents, and relative abundances of organic compounds, provided a chemical signature for road dust. To overall cytotoxicity values ranging between 7 and 58%, water extracts contributed less than 15%, and cell death mainly occurred via direct contact with solid-phase components, which possibly indicates that the selected chemical profile of solid-phase road dust components could serve as a strong predictor for BJ and WI-38 cytotoxicity. Pure metal oxides (Cr₂O₃, CuO, Fe₂O₃, MnO₂, NiO, or ZnO) exhibited a positive dose-response, and the corresponding metal contents in solid road dust were well correlated with cell viability. The principal component analysis (PCA) results suggested that the metal contents were stronger predictors of cytotoxicity than the benzene derivative or hydrocarbon contents. The chemical profiles established in this study could be further utilized to identify candidate health hazard factors in road dust.

CuO nanoparticle penetration through intact and damaged human skin

Trans-dermal in vitro study of CuO nanoparticles in contact with intact and damaged human skin using a Franz cell model.