Temporalis and masseter muscle function during incision in macaques and humans

Comparison of ultrasonography-based masticatory muscle thickness between temporomandibular disorders bruxers and temporomandibular disorders non-bruxers

To compare masticatory muscle thickness in patients with temporomandibular disorders (TMDs) during rest and clenching, and by body position, using ultrasonography. This prospective study included 96 patients with TMD (67 females, 29 males; mean age: 40.41 ± 17.88 years): group 1, comprising 66 patients with TMD without bruxism (TMD_nonbruxer), and group 2, comprising 30 patients with concurrent TMD and bruxism (TMD_bruxer). In patients with TMD, bruxism was correlated with the presence of tinnitus, muscle stiffness, sleep problems, psychological stress, and restricted mouth opening. The masseter muscle significantly thickened during clenching (11.16 ± 3.03 mm vs 14.04 ± 3.47 mm, p < 0.001), whereas the temporalis muscle showed no significant increase in thickness from resting to clenching in an upright position (7.91 ± 1.98 vs 8.39 ± 2.08, p = 0.103). Similarly, during clenching in the supine position, the masseter muscle was significantly thicker compared with rest (11.24 ± 2.42 vs 13.49 ± 3.09, p < 0.001), but no significant difference was observed in temporal muscle thickness (8.21 ± 2.16 vs 8.43 ± 1.94, p = 0.464). In comparison between two groups, the average thickness of the masseter muscle was greater among TMD_bruxers than among TMD_nonbruxers in both the upright and supine positions (all p < 0.05). In the generalized lineal model, female sex (B = - 1.018, 95% confidence interval [CI] - 1.855 to - 0.181, p = 0.017) and bruxism (B = 0.868, 95% CI 0.567 to 1.169, p = 0.048) significantly predicted changes in masseter muscle thickness. Female sex (B = - 0.201, 95% CI - 0.299 to - 0.103, p = 0.011), increased age (B = - 0.003, 95% CI - 0.005 to 0.000, p = 0.038), and muscle stiffness (B = - 1.373, 95% CI - 2.369 to - 0.376, p = 0.007) were linked to decreased temporal muscle thickness. Comparing TMD nonbruxer and bruxer muscle thicknesses in upright and supine positions revealed significant increased thickness in the masseter muscle during clenching but not in the temporalis muscle. Masseter muscle thickness varied significantly by sex, body position, and resting/clenching, notably influenced by bruxism. These findings emphasize the relevance of these factors in clinical examinations of patients with TMD.

Gape drives regional variation in temporalis architectural dynamics in tufted capuchins

Dynamic changes in jaw movements and bite forces depend on muscle architectural and neural factors that have rarely been compared within the same muscle. Here we investigate how regional muscle architecture dynamics-fascicle rotation, shortening, lengthening and architectural gear ratio (AGR)-vary during chewing across a functionally heterogeneous muscle. We evaluate whether timing in architecture dynamics relates to gape, food material properties and/or muscle activation. We also examine whether static estimates of temporalis fibre architecture track variation in dynamic architecture. Fascicle-level architecture dynamics were measured in three regions of the superficial temporalis of three adult tufted capuchins (Sapajus apella) using biplanar videoradiography and the XROMM workflow. Architecture dynamics data were paired with regional fine-wire electromyography data from four adult tufted capuchins. Gape accounted for most architectural change across the temporalis, but architectural dynamics varied between regions. Mechanically challenging foods were associated with lower AGRs in the anterior region. The timing of most dynamic architectural changes did not vary between regions and differed from regional variation in static architecture. Collectively these findings suggest that, when modelling temporalis muscle force production in extant and fossil primates, it is important to account for the effects of gape, regionalization and food material properties. This article is part of the theme issue 'Food processing and nutritional assimilation in animals'.

Jaw Elevator Muscle Coordination during Rhythmic Mastication in Primates: Are Triplets Units of Motor Control?

The activity of mammal jaw elevator muscles during chewing has often been described using the concept of the triplet motor pattern, in which triplet I (balancing side superficial masseter and medial pterygoid; working side posterior temporalis) is consistently activated before triplet II (working side superficial masseter and medial pterygoid; balancing side posterior temporalis), and each triplet of muscles is recruited and modulated as a unit. Here, new measures of unison, synchrony, and coordination are used to determine whether in 5 primate species (Propithecus verreauxi, Eulemur fulvus, Papio anubis, Macaca fuscata,and Pan troglodytes)muscles in the same triplet are active more in unison, are more synchronized, and are more highly coordinated than muscles in different triplets. Results show that triplet I muscle pairs are active more in unison than other muscle pairs in Eulemur, Macaca, and Papio,buttriplet muscle pairs are mostly not more tightly synchronized than non-triplet pairs. Triplet muscles are more coordinated during triplet pattern cycles than non-triplet cycles, while non-triplet muscle pairs are more coordinated during non-triplet cycles than triplet cycles. These results suggest that the central nervous system alters patterns of coordination between cycles, recruiting triplet muscles as a coordinated unit during triplet cycles but employing a different pattern of muscle coordination during non-triplet cycles. The triplet motor pattern may simplify modulation of rhythmic mastication by being one possible unit of coordination that can be recruited on a cycle-to-cycle basis.

Evaluating the triplet hypothesis during rhythmic mastication in primates

Mammalian mastication involves precise jaw movements including transverse movement of the mandible during the power stroke. Jaw elevation and transverse movement are driven by asymmetrical jaw elevator muscle activity, which is thought to include a phylogenetically primitive and conserved triplet motor pattern consisting of: triplet I (balancing side: superficial masseter and medial pterygoid; working side: posterior temporalis), which reaches onset, peak and offset first; and triplet II (working side: superficial masseter and medial pterygoid; balancing side: posterior temporalis), which is active second. Although the presence of a triplet motor pattern has been confirmed in several primate species, the prevalence of this motor pattern - i.e. the proportion of masticatory cycles that display it - has not been evaluated in primates. The present study quantifies the presence and prevalence of the triplet motor pattern in five different primate species, Eulemur fulvus, Propithecus verreauxi, Papio anubis, Macacafuscata and Pan troglodytes, using mean onset, peak and offset time relative to working superficial masseter. In all five of the species studied, the mean triplet motor pattern was observed at peak muscle activation, and in four out of the five species the triplet motor pattern occurred more frequently than expected at random at peak muscle activation and offset. Non-triplet motor patterns were observed in varying proportions at different time points in the masticatory cycle, suggesting that the presence or absence of the triplet motor pattern is not a binomial trait. Instead, the primate masticatory motor pattern is malleable within individual cycles, within individual animals and therefore within species.

In vivo bone strain and finite element modeling of a rhesus macaque mandible during mastication

Finite element analysis (FEA) is a commonly used tool in musculoskeletal biomechanics and vertebrate paleontology. The accuracy and precision of finite element models (FEMs) are reliant on accurate data on bone geometry, muscle forces, boundary conditions and tissue material properties. Simplified modeling assumptions, due to lack of in vivo experimental data on material properties and muscle activation patterns, may introduce analytical errors in analyses where quantitative accuracy is critical for obtaining rigorous results. A subject-specific FEM of a rhesus macaque mandible was constructed, loaded and validated using in vivo data from the same animal. In developing the model, we assessed the impact on model behavior of variation in (i) material properties of the mandibular trabecular bone tissue and teeth; (ii) constraints at the temporomandibular joint and bite point; and (iii) the timing of the muscle activity used to estimate the external forces acting on the model. The best match between the FEA simulation and the in vivo experimental data resulted from modeling the trabecular tissue with an isotropic and homogeneous Young's modulus and Poisson's value of 10GPa and 0.3, respectively; constraining translations along X,Y, Z axes in the chewing (left) side temporomandibular joint, the premolars and the m₁; constraining the balancing (right) side temporomandibular joint in the anterior-posterior and superior-inferior axes, and using the muscle force estimated at time of maximum strain magnitude in the lower lateral gauge. The relative strain magnitudes in this model were similar to those recorded in vivo for all strain locations. More detailed analyses of mandibular strain patterns during the power stroke at different times in the chewing cycle are needed.

Symphyseal surface strain during in vitro human mandibular wishboning

OBJECTIVES

This research theoretically models and empirically records symphyseal surface strain during in vitro human mandibular wishboning (lateral transverse bending) in order to test one aspect of the hypothesis that the chin is an adaptive response to masticatory stresses. From a perspective of optimality, three questions were tested: 1) Do human mandibles function as curved beams during wishboning? 2) Is the presence of a chin associated with lower than predicted curved beam effects? 3) Are there relatively low strain gradients on the lingual and labial symphyseal surfaces respectively?

MATERIALS AND METHODS

Based on morphometric criteria, theoretical wishboning strains were calculated for five dentate adult human mandibles. The same mandibles were fitted with strain gauges and subjected to simulated wishboning loads. From the empirically-recorded strains, relative strains were calculated by dividing all strains by the absolute lowest strain in a given specimen. The theoretical and empirical results were compared in order to address the three related questions guiding this research.

RESULTS

Human mandibles behave as curved beams during wishboning (question 1). Empirical strain measures showed greater disparity both between and within the labial and lingual symphyseal surfaces than the theoretical models predictions (questions 2 and 3).

DISCUSSION

Human symphyseal form, with its distinctive chin, is unlikely to be adapted for countering wishboning loads. Chins are associated with larger than expected strain gradients within and between symphyseal surfaces, which runs counter to the optimality criterion typically invoked in assessing trait performance for signs of adaptation. The implications are twofold: 1) wishboning may not, in fact, be a regular feature of human mastication or 2) wishboning may not pose the same structural risks in human jaws as this load does in other anthropoid primates.

What does feeding system morphology tell us about feeding?

Feeding is the set of behaviors whereby organisms acquire and process the energy required for survival and reproduction. Thus, feeding system morphology is presumably subject to selection to maintain or improve feeding performance. Relationships among feeding system morphology, feeding behavior, and diet not only explain the morphological diversity of extant primates, but can also be used to reconstruct feeding behavior and diet in fossil taxa. Dental morphology has long been known to reflect aspects of feeding behavior and diet but strong relationships of craniomandibular morphology to feeding behavior and diet have yet to be defined.

Masticatory loadings and cranial deformation in Macaca fascicularis: a finite element analysis sensitivity study

Biomechanical analyses are commonly conducted to investigate how craniofacial form relates to function, particularly in relation to dietary adaptations. However, in the absence of corresponding muscle activation patterns, incomplete muscle data recorded experimentally for different individuals during different feeding tasks are frequently substituted. This study uses finite element analysis (FEA) to examine the sensitivity of the mechanical response of a Macaca fascicularis cranium to varying muscle activation patterns predicted via multibody dynamic analysis. Relative to the effects of varying bite location, the consequences of simulated variations in muscle activation patterns and of the inclusion/exclusion of whole muscle groups were investigated. The resulting cranial deformations were compared using two approaches; strain maps and geometric morphometric analyses. The results indicate that, with bite force magnitude controlled, the variations among the mechanical responses of the cranium to bite location far outweigh those observed as a consequence of varying muscle activations. However, zygomatic deformation was an exception, with the activation levels of superficial masseter being most influential in this regard. The anterior portion of temporalis deforms the cranial vault, but the remaining muscles have less profound effects. This study for the first time systematically quantifies the sensitivity of an FEA model of a primate skull to widely varying masticatory muscle activations and finds that, with the exception of the zygomatic arch, reasonable variants of muscle loading for a second molar bite have considerably less effect on cranial deformation and the resulting strain map than does varying molar bite point. The implication is that FEA models of biting crania will generally produce acceptable estimates of deformation under load as long as muscle activations and forces are reasonably approximated. In any one FEA study, the biological significance of the error in applied muscle forces is best judged against the magnitude of the effect that is being investigated.

The influence of experimental manipulations on chewing speed during in vivo laboratory research in tufted capuchins (Cebus apella)

Even though in vivo studies of mastication in living primates are often used to test functional and adaptive hypotheses explaining primate masticatory behavior, we currently have little data addressing how experimental procedures performed in the laboratory influence mastication. The obvious logistical issue in assessing how animal manipulation impacts feeding physiology reflects the difficulty in quantifying mechanical parameters without handling the animal. In this study, we measured chewing cycle duration as a mechanical variable that can be collected remotely to: 1) assess how experimental manipulations affect chewing speed in Cebus apella, 2) compare captive chewing cycle durations to that of wild conspecifics, and 3) document sources of variation (beyond experimental manipulation) impacting captive chewing cycle durations. We find that experimental manipulations do increase chewing cycle durations in C. apella by as much as 152 milliseconds (ms) on average. These slower chewing speeds are mainly an effect of anesthesia (and/or restraint), rather than electrode implantation or more invasive surgical procedures. Comparison of captive and wild C. apella suggest there is no novel effect of captivity on chewing speed, although this cannot unequivocally demonstrate that masticatory mechanics are similar in captive and wild individuals. Furthermore, we document significant differences in cycle durations due to inter-individual variation and food type, although duration did not always significantly correlate with mechanical properties of foods. We advocate that the significant reduction in chewing speed be considered as an appropriate qualification when applying the results of laboratory-based feeding studies to adaptive explanations of primate feeding behaviors.

A preliminary analysis of the relationship between jaw-muscle architecture and jaw-muscle electromyography during chewing across primates

The architectural arrangement of the fibers within a muscle has a significant impact on how a muscle functions. Recent work on primate jaw-muscle architecture demonstrates significant associations with dietary variation and feeding behaviors. In this study, the relationship between masseter and temporalis muscle architecture and jaw-muscle activity patterns is explored using Belanger's treeshrews and 11 primate species, including two genera of strepsirrhines (Lemur and Otolemur) and five genera of anthropoids (Aotus, Callithrix, Cebus, Macaca, and Papio). Jaw-muscle weights, fiber lengths, and physiologic cross-sectional areas (PCSA) were quantified for this preliminary analysis or collected from the literature and compared to published electromyographic recordings from these muscles. Results indicate that masseter architecture is unrelated to the superficial masseter working-side/balancing-side (W/B) ratio across primate species. Alternatively, relative temporalis architecture is correlated with temporalis W/B ratios across primates. Specifically, relative temporalis PCSA is inversely related to the W/B ratio for the anterior temporalis, indicating that as animals recruit a larger relative percentage of their balancing-side temporalis, they possess the ability to generate relatively larger amounts of force from these muscles. These findings support three broader conclusions. First, masseter muscle architecture may have experienced divergent evolution across different primate clades related to novel functional roles in different groups. Second, the temporalis may be functionally constrained (relative to the masseter) across primates in its functional role of creating vertical occlusal forces during chewing. Finally, the contrasting results for the masseter and temporalis suggest that the fiber architecture of these muscles has evolved as distinct functional units in primates.

The morphology of the masticatory apparatus facilitates muscle force production at wide jaw gapes in tree-gouging common marmosets (Callithrix jacchus)

Common marmosets (Callithrix jacchus) generate wide jaw gapes when gouging trees with their anterior teeth to elicit tree exudate flow. Closely related cotton-top tamarins (Saguinus oedipus) do not gouge trees but share similar diets including exudates. Maximizing jaw opening theoretically compromises the bite forces that marmosets can generate during gouging. To investigate how jaw-muscle architecture and craniofacial position impact muscle performance during gouging, we combine skull and jaw-muscle architectural features to model muscle force production across a range of jaw gapes in these two species. We incorporate joint mechanics, resting sarcomere length and muscle architecture estimates from the masseter and temporalis to model muscle excursion, sarcomere length and relative tension as a function of joint angle. Muscle excursion from occlusion to an estimated maximum functional gape of 55 deg. was smaller in all regions of the masseter and temporalis of C. jacchus compared with S. oedipus except the posterior temporalis. As a consequence of reduced muscle excursion distributed over more sarcomeres in series (i.e. longer fibers), sarcomere length operating ranges are smaller in C. jacchus jaw muscles across this range of gapes. This configuration allows C. jacchus to act on a more favorable portion of the length-tension curve at larger gapes and thereby generate relatively greater tension in these muscles compared with S. oedipus. Our results suggest that biting performance during tree gouging in common marmosets is improved by a musculoskeletal configuration that reduces muscle stretch at wide gapes while simultaneously facilitating comparatively large muscle forces at the extremes of jaw opening.

Phase II jaw movements and masseter muscle activity during chewing inPapio anubis

It was proposed that the power stroke in primates has two distinct periods of occlusal contact, each with a characteristic motion of the mandibular molars relative to the maxillary molars. The two movements are called phase I and phase II, and they occur sequentially in that order (Kay and Hiiemae [1974] Am J. Phys. Anthropol. 40:227-256, Kay and Hiiemae [1974] Prosimian Biology, Pittsburgh: University of Pittsburgh Press, p. 501-530). Phase I movement is said to be associated with shearing along a series of crests, producing planar phase I facets and crushing on surfaces on the basins of the molars. Phase I terminates in centric occlusion. Phase II movement is said to be associated with grinding along the same surfaces that were used for crushing at the termination of phase I. Hylander et al. ([1987] Am J. Phys. Anthropol. 72:287-312; see also Hiiemae [1984] Food Acquisition and Processing, London: Academic Press, p. 257-281; Hylander and Crompton [1980] Am J. Phys. Anthropol. 52:239-251, [1986] Arch. Oral. Biol. 31:841-848) analyzed data on macaques and suggested that phase II movement may not be nearly as significant for food breakdown as phase I movement simply because, based on the magnitude of mandibular bone strain patterns, adductor muscle and occlusal forces are likely negligible during movement out of centric occlusion. Our goal is to better understand the functional significance of phase II movement within the broader context of masticatory kinematics during the power stroke. We analyze vertical and transverse mandibular motion and relative activity of the masseter and temporalis muscles during phase I and II movements in Papio anubis. We test whether significant muscle activity and, by inference, occlusal force occurs during phase II movement. We find that during phase II movement, there is negligible force developed in the superficial and deep masseter and the anterior and posterior temporalis muscles. Furthermore, mandibular movements are small during phase II compared to phase I. These results suggest that grinding during phase II movement is of minimal importance for food breakdown, and that most food breakdown on phase II facets occurs primarily at the end of phase I movement (i.e., crushing during phase I movement). We note, however, that depending on the orientation of phase I facets, significant grinding also occurs along phase I facets during phase I.

Masseter electromyography during chewing in ring-tailed lemurs (Lemur catta)

We examined masseter recruitment and firing patterns during chewing in four adult ring-tailed lemurs (Lemur catta), using electromyography (EMG). During chewing of tougher foods, the working-side superficial masseter tends to show, on average, 1.7 times more scaled EMG activity than the balancing-side superficial masseter. The working-side deep masseter exhibits, on average, 2.4 times the scaled EMG activity of the balancing-side deep masseter. The relatively larger activity in the working-side muscles suggests that ring-tailed lemurs recruit relatively less force from their balancing-side muscles during chewing. The superficial masseter working-to-balancing-side (W/B) ratio for lemurs overlaps with W/B ratios from anthropoid primates. In contrast, the lemur W/B ratio for the deep masseter is more similar to that of greater galagos, while both are significantly larger than W/B ratios of anthropoids. Because ring-tailed lemurs have unfused and hence presumably weaker symphyses, these data are consistent with the symphyseal fusion-muscle recruitment hypothesis stating that symphyseal fusion in anthropoids provides increased strength for resisting forces created by the balancing-side jaw muscles during chewing. Among the masseter muscles of ring-tailed lemurs, the working-side deep masseter peaks first on average, followed in succession by the balancing-side deep masseter, balancing-side superficial masseter, and finally the working-side superficial masseter. Ring-tailed lemurs are similar to greater galagos in that their balancing-side deep masseter peaks well before their working-side superficial masseter. We see the opposite pattern in anthropoids, where the balancing-side deep masseter peaks, on average, after the working-side superficial masseter. This late activity of the balancing-side deep masseter in anthropoids is linked to lateral-transverse bending, or wishboning, of their mandibular symphyses. Subsequently, the stresses incurred during wishboning are hypothesized to be a proximate reason for strengthening, and hence fusion, of the anthropoid symphysis. Thus, the absence of this muscle-firing pattern in ring-tailed lemurs with their weaker, unfused symphyses provides further correlational support for the symphyseal fusion late-acting balancing-side deep masseter hypothesis linking wishboning and symphyseal strengthening in anthropoids. The early peak activity of the working-side deep masseter in ring-tailed lemurs is unlike galagos and most similar to the pattern seen in macaques and baboons. We hypothesize that this early activity of the working-side deep masseter moves the lower jaw both laterally toward the working side and vertically upward, to position it for the upcoming power stroke. From an evolutionary perspective, the differences in peak firing times for the working-side deep masseter between ring-tailed lemurs and greater galagos indicate that deep masseter firing patterns are not conserved among strepsirrhines.

Bite force production capability and efficiency in Neandertals and modern humans

Although there is consensus that Neandertal craniofacial morphology is unique in the genus Homo, debate continues regarding the precise anatomical basis for this uniqueness and the evolutionary mechanism that produced it. In recent years, biomechanical explanations have received the most attention. Some proponents of the "anterior dental loading hypothesis" (ADLH) maintain that Neandertal facial anatomy was an adaptive response to high-magnitude forces resulting from both masticatory and paramasticatory activity. However, while many have argued that Neandertal facial structure was well-adapted to dissipate heavy occlusal loads, few have considered, much less demonstrated, the ability of the Neandertal masticatory system to generate these presumably heavy loads. In fact, the Neandertal masticatory configuration has often been simultaneously interpreted as being disadvantageous for producing large bite forces. With rare exception, analyses that attempted to resolve this conflict were qualitative rather than quantitative. Using a three-dimensional digitizer, we recorded a sequence of points on the cranium and associated mandible of the Amud 1, La Chapelle-aux-Saints, and La Ferrassie 1 Neandertals, and a sample of early and recent modern humans (n = 29), including a subsample with heavy dental wear and documented paramasticatory behavior. From these points, we calculated measures of force-production capability (i.e., magnitudes of muscle force, bite force, and condylar reaction force), measures of force production efficiency (i.e., ratios of force magnitudes and muscle mechanical advantages), and a measure of overall size (i.e., the geometric mean of all linear craniofacial measurements taken). In contrast to the expectations set forth by the ADLH, the primary dichotomy in force-production capability was not between Neandertal and modern specimens, but rather between large (robust) and small (gracile) specimens overall. Our results further suggest that the masticatory system in the genus Homo scales such that a certain level of force-production efficiency is maintained across a considerable range of size and robusticity. Natural selection was probably not acting on Neandertal facial architecture in terms of peak bite force dissipation, but rather on large tooth size to better resist wear and abrasion from submaximal (but more frequent) biting and grinding forces. We conclude that masticatory biomechanical adaptation does not underlie variation in the facial skeleton of later Pleistocene Homo in general, and that continued exploration of alternative explanations for Neandertal facial architecture (e.g., climatic, respiratory, developmental, and/or stochastic mechanisms) seems warranted.

Jaw-muscle electromyography during chewing in Belanger's treeshrews (Tupaia belangeri)

We examined masseter and temporalis recruitment and firing patterns during chewing in five male Belanger's treeshrews (Tupaia belangeri), using electromyography (EMG). During chewing, the working-side masseters tend to show almost three times more scaled EMG activity than the balancing-side masseters. Similarly, the working-side temporalis muscles have more than twice the scaled EMG activity of the balancing-side temporalis. The relatively higher activity in the working-side muscles suggests that treeshrews recruit less force from their balancing-side muscles during chewing. Most of the jaw-closing muscles in treeshrews can be sorted into an early-firing or late-firing group, based on occurrence of peak activity during the chewing cycle. Specifically, the first group of jaw-closing muscles to reach peak activity consists of the working-side anterior and posterior temporalis and the balancing-side superficial masseter. The balancing-side anterior and posterior temporalis and the working-side superficial masseter peak later in the power stroke. The working-side deep masseter peaks, on average, slightly before the working-side superficial masseter. The balancing-side deep masseter typically peaks early, at about the same time as the balancing-side superficial masseter. Thus, treeshrews are unlike nonhuman anthropoids that peak their working-side deep masseters early and their balancing-side deep masseters late in the power stroke. Because in anthropoids the late firing of the balancing-side deep masseter contributes to wishboning of the symphysis, the treeshrew EMG data suggest that treeshrews do not routinely wishbone their symphyses during chewing. Based on the treeshrew EMG data, we speculate that during chewing, primitive euprimates 1) recruited more force from the working-side jaw-closing muscles as compared to the balancing-side muscles, 2) fired an early group of jaw-closing muscles followed by a second group of muscles that peaked later in the power stroke, 3) did not fire their working-side deep masseter significantly earlier than their working-side superficial masseter, and 4) did not routinely fire their balancing-side deep masseter after the working-side superficial masseter.

Comparative functional analysis of skull morphology of tree-gouging primates

Many primates habitually feed on tree exudates such as gums and saps. Among these exudate feeders, Cebuella pygmaea, Callithrix spp., Phaner furcifer, and most likely Euoticus elegantulus elicit exudate flow by biting into trees with their anterior dentition. We define this behavior as gouging. Beyond the recent publication by Dumont ([1997] Am J Phys Anthropol 102:187-202), there have been few attempts to address whether any aspect of skull form in gouging primates relates to this specialized feeding behavior. However, many researchers have proposed that tree gouging results in larger bite force, larger internal skull loads, and larger jaw gapes in comparison to other chewing and biting behaviors. If true, then we might expect primate gougers to exhibit skull modifications that provide increased abilities to produce bite forces at the incisors, withstand loads in the skull, and/or generate large gapes for gouging. We develop 13 morphological predictions based on the expectation that gouging involves relatively large jaw forces and/or jaw gapes. We compare skull shapes for P. furcifer to five cheirogaleid taxa, E. elegantulus to six galagid species, and C. jacchus to two tamarin species, so as to assess whether gouging primates exhibit these predicted morphological shapes. Our results show little morphological evidence for increased force-production or load-resistance abilities in the skulls of these gouging primates. Conversely, these gougers tend to have skull shapes that are advantageous for creating large gapes. For example, all three gouging species have significantly lower condylar heights relative to the toothrow at a given mandibular length in comparison with closely related, nongouging taxa. Lowering the height of the condyle relative to the mandibular toothrow should reduce the stretching of the masseters and medial pterygoids during jaw opening, as well as position the mandibular incisors more anteriorly at wide jaw gapes. In other words, the lower incisors will follow a more vertical trajectory during both jaw opening and closing. We predict, based on these findings, that tree-gouging primates do not generate unusually large forces, but that they do use relatively large gapes during gouging. Of course, in vivo data on jaw forces and jaw gapes are required to reliably assess skull functions during gouging.

Masticatory form and function in the African apes

This study examines variability in masticatory morphology as a function of dietary preference among the African apes. The African apes differ in the degree to which they consume leaves and other fibrous vegetation. Gorilla gorilla beringei, the eastern mountain gorilla, consumes the most restricted diet comprised of mechanically resistant foods such as leaves, pith, bark, and bamboo. Gorilla gorilla gorilla, the western lowland gorilla subspecies, consumes leaves and other terrestrial herbaceous vegetation (THV) but also consumes a fair amount of ripe, fleshy fruit. In contrast to gorillas, chimpanzees are frugivores and rely on vegetation primarily as fallback foods. However, there has been a long-standing debate regarding whether Pan paniscus, the pygmy chimpanzee (or bonobo), consumes greater quantities of THV as compared to Pan troglodytes, the common chimpanzee. Because consumption of resistant foods involves more daily chewing cycles and may require larger average bite force, the mechanical demands placed on the masticatory system are expected to be greater in folivores as compared to primates that consume large quantities of fleshy fruit. Therefore, more folivorous taxa are predicted to exhibit features that improve load-resistance capabilities and increase force production. To test this hypothesis, jaw and skull dimensions were compared in ontogenetic series of G. g. beringei, G. g. gorilla, P. t. troglodytes, and P. paniscus. Controlling for the influence of allometry, results show that compared to both chimpanzees and bonobos, gorillas exhibit some features of the jaw complex that are suggestive of improved masticatory efficiency. For example, compared to all other taxa, G. g. beringei has a significantly wider mandibular corpus and symphysis, larger area for the masseter muscle, higher mandibular ramus, and higher mandibular condyle relative to the occlusal plane of the mandible. However, the significantly wider mandibular symphysis may be an architectural response to increasing symphyseal curvature with interspecific increase in size. Moreover, Gorilla and Pan do not vary consistently in all features, and some differences run counter to predictions based on dietary variation. Thus, the morphological responses are not entirely consonant with predictions based on hypothesized loading regimes. Finally, despite morphological differences between bonobos and chimpanzees, there is no systematic pattern of differentiation that can be clearly linked to differences in diet. Results indicate that while some features may be linked to differences in diet among the African apes, diet alone cannot account for the patterns of morphological variation demonstrated in this study. Allometric constraints and dental development also appear to play a role in morphological differentiation among the African apes.

Symphyseal fusion and jaw-adductor muscle force: an EMG study

The purpose of this study is to test various hypotheses about balancing-side jaw muscle recruitment patterns during mastication, with a major focus on testing the hypothesis that symphyseal fusion in anthropoids is due mainly to vertically- and/or transversely-directed jaw muscle forces. Furthermore, as the balancing-side deep masseter has been shown to play an important role in wishboning of the macaque mandibular symphysis, we test the hypothesis that primates possessing a highly mobile mandibular symphysis do not exhibit the balancing-side deep masseter firing pattern that causes wishboning of the anthropoid mandible. Finally, we also test the hypothesis that balancing-side muscle recruitment patterns are importantly related to allometric constraints associated with the evolution of increasing body size. Electromyographic (EMG) activity of the left and right superficial and deep masseters were recorded and analyzed in baboons, macaques, owl monkeys, and thick-tailed galagos. The masseter was chosen for analysis because in the frontal projection its superficial portion exerts force primarily in the vertical (dorsoventral) direction, whereas its deep portion has a relatively larger component of force in the transverse direction. The symphyseal fusion-muscle recruitment hypothesis predicts that unlike anthropoids, galagos develop bite force with relatively little contribution from their balancing-side jaw muscles. Thus, compared to galagos, anthropoids recruit a larger percentage of force from their balancing-side muscles. If true, this means that during forceful mastication, galagos should have working-side/balancing-side (W/B) EMG ratios that are relatively large, whereas anthropoids should have W/B ratios that are relatively small. The EMG data indicate that galagos do indeed have the largest average W/B ratios for both the superficial and deep masseters (2.2 and 4.4, respectively). Among the anthropoids, the average W/B ratios for the superficial and deep masseters are 1.9 and 1.0 for baboons, 1.4 and 1.0 for macaques, and both values are 1.4 for owl monkeys. Of these ratios, however, the only significant difference between thick-tailed galagos and anthropoids are those associated with the deep masseter. Furthermore, the analysis of masseter firing patterns indicates that whereas baboons, macaques and owl monkeys exhibit the deep masseter firing pattern associated with wishboning of the macaque mandibular symphysis, galagos do not exhibit this firing pattern. The allometric constraint-muscle recruitment hypothesis predicts that larger primates must recruit relatively larger amounts of balancing-side muscle force so as to develop equivalent amounts of bite force. Operationally this means that during forceful mastication, the W/B EMG ratios for the superficial and deep masseters should be negatively correlated with body size. Our analysis clearly refutes this hypothesis. As already noted, the average W/B ratios for both the superficial and deep masseter are largest in thick-tailed galagos, and not, as predicted by the allometric constraint hypothesis, in owl monkeys, an anthropoid whose body size is smaller than that of thick-tailed galagos. Our analysis also indicates that owl monkeys have W/B ratios that are small and more similar to those of the much larger-sized baboons and macaques. Thus, both the analysis of the W/B EMG ratios and the muscle firing pattern data support the hypothesis that symphyseal fusion and transversely-directed muscle force in anthropoids are functionally linked. This in turn supports the hypothesis that the evolution of symphyseal fusion in anthropoids is an adaptation to strengthen the symphysis so as to counter increased wishboning stress during forceful unilateral mastication. (ABSTRACT TRUNCATED)

Why fuse the mandibular symphysis? A comparative analysis

Fused symphyses, which evolved independently in several mammalian taxa, including anthropoids, are stiffer and stronger than unfused symphyses. This paper tests the hypothesis that orientations of tooth movements during occlusion are the primary basis for variations in symphyseal fusion. Mammals whose teeth have primarily dorsally oriented occlusal trajectories and/or rotate their mandibles during occlusion will not benefit from symphyseal fusion because it prevents independent mandibular movements and because unfused symphyses transfer dorsally oriented forces with equal efficiency; mammals with predominantly transverse power strokes are predicted to benefit from symphyseal fusion or greatly restricted mediolateral movement at the symphysis in order to increase force transfer efficiency across the symphysis in the transverse plane. These hypotheses are tested with comparative data on symphyseal and occlusal morphology in several mammals, and with kinematic and EMG analyses of mastication in opossums (Didelphis virginiana) and goats (Capra hircus) that are compared with published data on chewing in primates. Among mammals, symphyseal fusion or a morphology that greatly restricts movement correlates significantly with occlusal orientation: species with more transversely oriented occlusal planes tend to have fused symphyses. The ratio of working- to balancing-side adductor muscle force in goats and opossums is close to 1:1, as in macaques, but goats and opossums have mandibles that rotate independently during occlusion, and have predominantly vertically oriented tooth movements during the power stroke. Symphyseal fusion is therefore most likely an adaptation for increasing the efficiency of transfer of transversely oriented occlusal forces in mammals whose mandibles do not rotate independently during the power stroke.

Electromyography of the anterior temporalis and masseter muscles of owl monkeys (Aotus trivirgatus) and the function of the postorbital septum

Anthropoids and tarsiers are distinguished from all other vertebrates by the possession of a postorbital septum, which is formed by the frontal, alisphenoid, and zygomatic bones. Cartmill [(1980) In: Evolutionary Biology of the New World Monkeys and Continental Drift. New York: Plenum, p 243-274] suggested that the postorbital septum evolved in the stem lineage of tarsiers and anthropoids to insulate the eye from movements arising in the temporal fossa. Ross [(1996) Am J Phys Anthropol 91:305-324] suggested that the septum insulates the orbital contents from incursions by the line of action of the anterior temporal muscles caused by the unique combination of high degrees of orbital frontation and convergence. Both of these hypotheses must explain why insulation of the orbital contents could not be achieved by decreasing the size of the anterior temporal musculature with a corresponding increase in size of the remaining jaw adductors, rather than evolving a postorbital septum. One possibility is that the anterior temporalis is an important contributor to vertically directed bite forces during all biting and chewing activities. Another possibility is that reduction in anterior temporal musculature would compromise the ability to produce powerful bite forces, either at the incisors or along the postcanine toothrow. To evaluate these hypotheses, electromyographic (EMG) recordings were made from the masseter muscle and the anterior and posterior portions of the temporalis muscles of two owl monkeys, Aotus trivirgatus. The EMG data indicate that anterior temporalis activity relative to that of the superficial masseter is lower during incision than mastication. In addition, activity of the anterior temporalis is not consistently higher than the posterior temporalis during incision. The data indicate relatively greater activity of anterior temporalis compared to other muscles during isometric biting on the postcanine toothrow. This may be due to decreased activity in superficial masseter and posterior temporalis, rather than elevated anterior temporalis activity. The anterior temporalis is not consistently less variable in activity than the superficial masseter and posterior temporalis. The EMG data gathered here indicate no reason for suggesting that the anterior temporal muscles in anthropoids are utilized especially for incisal preparation of hard fruits. Maintenance of relatively high EMG activity in anterior temporalis across a wide range of biting behaviors is to be expected in a vertically oriented and rostrally positioned muscle such as this because, compared to the posterior temporalis, superficial masseter and medial pterygoid, it can contribute relatively larger vertical components of force to bites along the postcanine toothrow. The in vivo data do not support this hypothesis, possibly because of effects of bite point and bite force orientation.

Effect of jaw opening on the direction and magnitude of human incisal bite forces

The maximum bite force (MBF) appears to be different when measured at different jaw openings (e.g., Manns et al., 1979; Mackenna and Turker, 1983; Lindauer et al., 1993). However, the change could be related to a change in the bite direction. We have measured the MBF on incisors and its direction in three dimensions for different jaw openings in ten subjects. Surface electromyography (EMG) of anterior temporalis and masseter muscles on both sides was recorded simultaneously. The results showed that: (1) the average %MBF increased as the jaw was opened, reached a plateau between 14 and 28 mm of incisal separation, and then decreased at wider jaw openings; (2) the initial forward bite direction with respect to the mandibular occlusal plane shifted backwards during jaw opening; and (3) the activity of the masseter muscles declined and that of the temporalis muscles was largely unchanged, resulting in an increase of the ratio between the activity in temporalis and masseter muscles (T/M). There was a significant correlation between bite direction and jaw opening (r = 0.51, p < 0.001) and between T/M ratio and jaw opening (r = 0.56, p < 0.001). Based on comparative data, we have calculated sarcomere lengths while the jaw is opened and hypothesize that the average %MBF reaches its maximum when the sarcomeres in the masseter muscle achieve their optimum length. A plateau continues during further jaw opening, until those of temporalis reach their optimum length while those of masseter lengthen beyond their optimum length. The change in bite direction was attributed to either a change in the relation between upper and lower bite points as the jaw was opened or the gradual decline of masseter activity at larger openings.

Electromyographic heterogeneity in the human temporalis and masseter muscles during static biting, open/close excursions, and chewing

The human temporalis and masseter muscles are not activated homogeneously during static bite force tasks. In this study, we studied the possible existence of regional differences in these muscles under dynamic conditions. Electromyographic (EMG) activity was recorded by means of bipolar fine-wire electrodes. Six electrodes were inserted into the temporalis muscle and three into the masseter muscle. Recordings were made during maximal effort intercuspal and incisal static clenches, open/close excursions from both the intercuspal and incisal positions, and unilateral gum and licorice chewing on right and left sides. The EMG peak amplitudes and the peak occurrences were compared. During the static clenches and the open/close excursions, no differences could be demonstrated between the regions of the temporalis muscle. However, during the chewing tasks, the anterior and posterior regions behaved differently. Throughout almost all tasks, both superficial and deep parts could be distinguished in the masseter muscle. A further division of the deep masseter was task-dependent. In both the temporalis and masseter muscles, maximal activity (100%) was reached during intercuspal clenches. The average activity declined to 35% of the maximal activity in the temporalis muscle, to 47% in the deep, and to 86% in the superficial masseter during incisal clenches. During all chewing tasks, the EMG peak activity of the anterior temporalis and the superficial masseter muscles was higher in the working than in the balancing condition. The general finding was that different regions were preferentially activated, according to task. The detailed regional specialization previously observed during static bite force tasks could not be demonstrated in the present study.

An electromyographic analysis of orofacial motor activities during trained tongue-protrusion and biting tasks in monkeys

This study sought to characterise the electromyographic (EMG) activity patterns of orofacial-muscles during trained tongue-protrusion and biting tasks in two awake monkeys (Macaca fascicularis). Chronic or acute EMG electrodes were placed in the anterior digastric (DIG), genioglossus (GG), masseter (MASS), platysma (PLAT), zygomaticus major (ZYGO), orbicularis oris superior (OOS), and orbicularis oris inferior (OOI) muscles and their EMG activity as well as the force signals of the tongue-protrusion and biting tasks were recorded. A total of 327 tongue-protrusion task trials and a total of 210 biting-task trials were successfully completed in several recording sessions and the EMG patterns were generally consistent between the different sessions. For the tongue task, the mean onset time of increase in GG activity significantly (p < 0.0001) led the mean onset time of increase in the force. The DIG, GG, and OOI (and also the OOS in one of the monkeys) showed a significant (p < 0.0001) increase in mean EMG amplitude during the holding phase, but the GG in both monkeys had the highest mean EMG amplitude ratio (MAR), i.e. the mean EMG amplitude during the holding or dynamic phase divided by the mean EMG amplitude during the pre-trial period. A similar EMG pattern was documented for different directions of the tongue-protrusion task (right, symmetrical, and left) and changes in the levels of EMG activities occurred in GG and OOI as the direction of the tongue-protrusion task changed from left to right. The task at different forces was associated with no apparent change in MAR for the holding phase for each muscle recorded. However, during the dynamic phase, only the GG showed a significant increase in EMG activity as the forces were increased. For the biting task, the mean onset times of the MASS activity and force were not significantly different. The MASS and ZYGO muscles (and the PLAT in one of the monkeys) showed a significant increase in mean EMG amplitude during the holding phase compared with the pre-trial period, and the MASS showed the highest MAR. It was also the only muscle showing a significant increase in the EMG activity when the bite-force level was increased. These findings reveal that certain orofacial muscles are selectively recruited during the two different orofacial tasks.(ABSTRACT TRUNCATED AT 400 WORDS)

Mandibular growth and function in Archaeolemur

Ontogenetic changes in the morphology of the mandibular symphysis are described in Archaeolemur so as to infer the functional significance of symphyseal fusion in this subfossil Malagasy lemur. The first regions of the symphysis to show a more complex morphology were the lower and anterior borders of the joint and, to a lesser extent, the lingual borders of the superior and inferior transverse tori. During growth, these regions became increasingly rugose and encroached upon a centrally located, smooth, "oval" region, which may have been a principal pathway for neurovascular structures communicating with the unfused joint. In subadults, the symphysis was completely fused except for the lingual surface of the inferior transverse torus, where a patent suture and potential space were present between dentaries. Thus, in Archaeolemur there was an age- and size-related pattern of increased symphyseal ossification or fusion that was complete by adulthood. The morphology of the interlocking bony processes and the sequence of ossification in the symphysis suggest that increased dorsoventral shear stress during mastication was the most likely determinant of symphyseal fusion in Archaeolemur. The allometric pattern of greater symphyseal fusion may be linked to the presence of relatively greater dorsoventral shear in adults due to an increased recruitment of balancing-side jaw-muscle force. There is little indication that the symphysis of juvenile Archaeolemur was buttressed to resist forces associated with "wishboning" during mastication or vertical bending during incision. Our observations, as well as those of others, suggest that symphyseal fusion in primates occurs initially as a response to increased dorsoventral shear during mastication. Therefore, wishboning stress might only become a major determinant of symphyseal form and function in those taxa that develop a fused symphysis to counter increased dorsoventral shear.

Jaw muscle function and wishboning of the mandible during mastication in macaques and baboons

An analysis of in vivo bone strain indicates that the mandibular symphysis of macaques experiences lateral transverse bending or "wishboning" during the power stroke of mastication, and this loading regime results in relatively intense concentrations of stress along the lingual aspect of the symphysis (Hylander 1984, 1985). It has been hypothesized that peak wishboning of the macaque mandible, which probably occurs at the very end of the power stroke, that is, after the initial occurrence of maximum intercuspation, is associated with the late peak activity of the balancing-side deep masseter muscle coupled with the rapid decline in the activity of the balancing-side medial pterygoid and superficial masseter muscles (Hylander et al., 1987). The main purpose of this study is to do a detailed analysis of the electromyographic (EMG) activity of the deep and superficial masseter and medial pterygoid muscles so as to provide a better understanding of the external forces associated with wishboning. This was done by recording and analyzing EMG activity from the superficial masseter, deep masseter, and medial pterygoid muscles in macaques and baboons. EMG activity was recorded from bipolar fine-wire electrodes, and the data were quantified and analyzed using digital techniques. The EMG data clearly support our original observation that the balancing-side posterior deep masseter exhibits peak EMG activity relatively late in the power stroke at a time when activity is rapidly decreasing in the balancing-side medial pterygoid and superficial masseter muscles. Moreover, peak activity of the balancing-side deep masseter occurs at a time when the activity of the working-side deep and superficial masseter and medial pterygoid muscles are also decreasing. Thus, these data are consistent with the hypothesis that wishboning of the mandible is influenced significantly by the late occurrence of force from the balancing-side deep masseter. The EMG data also indicate that residual force from the relaxing superficial masseter may contribute significantly to wishboning. Finally, patterns of wishboning are not fully accounted for by our EMG analysis of the deep and superficial masseter and medial pterygoid muscles. This is probably because the lateral ptergyoids, which can either counter increased wishboning or actually cause reverse wishboning, were not included in our EMG analysis. The EMG data demonstrate that jaw-closing muscle recruitment patterns for macaques and baboons differ from those of humans. Nevertheless, in spite of these differences, it appears, based on previously published EMG data, that the human symphysis may also experience wishboning.(ABSTRACT TRUNCATED AT 400 WORDS)

Direction of a bite force determines the pattern of activity in jaw-closing muscles

Human individuals were hypothesized to use the same pattern of jaw muscle activity to produce the same bite force. To test this hypothesis, we used a 2-mm-thick force transducer to monitor the magnitude and direction of a bite force between a single pair of occluding first molars. Five subjects performed standardized bite force tasks. Six different magnitudes were tested, each in five directions. The surface electromyographic (EMG) activity in the left and right masseter and temporalis muscles was recorded, integrated, and normalized. Ratios of the EMG activity of paired muscles (e.g., the ratio of working temporalis and working masseter) were calculated for each bite force task. Each ratio was roughly constant for each direction of bite force, regardless of its magnitude. In contrast, when the magnitude of bite force was the same but the directions were different, the ratio was not constant. We conclude that the direction of a bite force, not its magnitude, determines the pattern of activity of jaw-closing muscles. The shared patterns of muscle activation may be the result of a subconscious optimization of jaw muscle forces to improve efficiency.

Modelling relative masseter force from surface electromyograms during mastication in non-human primates

The purpose was to analyse the relation between masseter electromyograms (EMGs) and relative masseter force during the power stroke of mastication. The electromyographic activity of the masseter was characterized by recording from bipolar surface electrodes placed over the superficial portion of the muscle; relative masseter force was estimated by characterizing surface bone strain along the lateral aspect of the zygomatic arch. The subjects were six adult macaques and one adult baboon. Masseter EMGs were quantified by r.m.s. analysis of the raw digitized EMG. The length of the time interval (the time constant) during which the r.m.s. values were calculated was repeatedly altered so as to determine which time constant was optimal for producing an EMG-derived waveform that best mimicked relative masseter force during the near-isometric phase of muscle contraction. The data indicate that between subjects this time constant varied from 35 to 72 ms, with an overall median of 42 ms and a grand mean of 49 ms. The use of a 42-ms time constant for all of the subjects resulted in an average latency between the masseter EMG waveform and relative masseter force of about 30 ms during the latter portion of the power stroke of mastication. This analysis provides, as a first approximation, an empirical basis for modelling relative jaw-muscle force using surface EMGs recorded during that portion of the power stroke of mastication when the jaw-closing muscles are contracting under near isometric conditions.

A thin bite-force transducer with three-dimensional capabilities reveals a consistent change in bite-force direction during human jaw-muscle endurance tests

The construction of a 2 mm-thick bite-force transducer, capable of measuring the magnitude and direction of a bite force in three dimensions, is described. The transducer is programmed to display the properties of a bite force on a computer monitor. A preliminary study was designed to test its performance. This took the form of endurance tests on three human subjects: the test was repeated on one subject. The direction of a sustained maximum incisal bite force was monitored while subjects clenched for as long as possible on the transducer. The initial bite force was directed about 10-15 degrees forward of the vertical. During the test the magnitude of the bite force was kept roughly constant but, for all four tests, its direction gradually changed until at the failure point it was nearly vertical. The consistency of the results suggests that the transducer is sufficiently accurate to be a useful tool for studying human jaw mechanics.

Muscle force recruitment and biomechanical modeling: an analysis of masseter muscle function during mastication in Macaca fascicularis

The main purpose of this study is to test the hypothesis that as subjects chew with increasing levels of force, the ratio of the working- to balancing-side jaw-muscle force (W/B) decreases and begins to approach 1.0. We did this by analyzing relative masseter force in Macaca fascicularis using both strain gage and surface electromyographic (EMG) techniques. In addition, we also analyzed: 1) the relationship between jaw position using cineradiographic techniques and relative masseter force, 2) the timing differences between relative masseter force from the working and balancing sides, and 3) the loading and unloading characteristics of the masseter muscle. Our findings indicate that when macaques increase the amount of overall masticatory force during chewing, the W/B ratio for masseter force frequently (but not always) decreases and begins to approach 1.0. Therefore, our working hypothesis is not completely supported because the W/B ratio does not decrease with increasing levels of force in all subjects. The data also demonstrate timing differences in masseter force. During apple-skin mastication, the average peak masseter force on the working side occurs immediately at or slightly after the initial occurrence of maximum intercuspation, whereas the average peak masseter force on the balancing side occurs well before maximum intercuspation. On average, we found that peak force from the balancing-side masseter precedes the working-side masseter by about 26 msec. The greater the asynchrony between working- and balancing-side masseter force, the greater the difference in the relative magnitude of these forces. For example, in the subject with the greatest asynchrony, the balancing-side masseter had already fallen to about one-half of peak force when the working-side masseter reached peak force. Our data also indicate that the loading and unloading characteristics of the masseter differ between the working and balancing sides. Loading (from 50 to 100% of peak force) and unloading (from 100 to 50% of peak force) for the balancing-side masseter tends to be rather symmetrical. In contrast, the working-side masseter takes much longer to load from 50 to 100% of peak force than it does to unload from 100 to 50% of peak force. Finally, it takes on average about 35 msec for the working-side zygoma and 42 msec for the balancing-side zygoma to unload from 100 to 50% of peak force during apple-skin mastication, indicating that the unloading characteristics of the macaque masseter during mastication closely approximates its relaxation characteristics (as determined by muscle stimulation).

Masticatory-stress hypotheses and the supraorbital region of primates

The purpose of this study is to test various masticatory-stress hypotheses about the evolution and function of well-developed browridges of higher primates. This was done by measuring and analyzing patterns of in vivo bone strain recorded from three-element rosette strain gages bonded to the supraorbital region and to other portions of the bony face of Macaca fascicularis and Papio anubis during mastication and incision. The magnitude and direction of the principal strains recorded support Endo's hypothesis that the supraorbital region during mastication and incision is bent in the frontal plane (Endo, 1966). Our data do not, however, support his hypothesis that the supraorbital region is bent more during incision than during mastication. The data also demonstrate that overall levels of supraorbital strain are not larger in more prognathic subjects. Most importantly, the data indicate that the supraorbital region of nonhuman catarrhines is strained very little during mastication and incision. This indicates that there is much more supraorbital bone than is necessary both to counter masticatory loads and to provide an adequate safety factor to failure for these loads. This in turn suggests that the macaque and baboon browridges can be considerably reduced in size and still maintain these required structural characteristics. Thus, our experiments provide no support whatsoever for those hypotheses that directly link browridge morphology to masticatory stress (cf. Endo, 1966; Russell, 1983, 1985). A recent review of Endo's original work indicates that this latter statement is also true for humans (Picq and Hylander, 1989). We conclude, therefore, that there is no good reason to believe that enlarged browridges in living and/or fossil primates are structural adaptations to counter intense masticatory forces. The evolution of browridge morphology in primates is best explained on the basis of factors related to the position of the brain relative to the orbits (Moss and Young, 1960). When these structures are widely separated, as in gorillas, the large intervening space must be bridged with bone. In addition, enough bone must be present within the supraorbital and bridged regions to prevent structural failure due to non-masticatory external forces associated with highly active primates (e.g., accidental traumatic forces applied to the orbits and neurocranium). This requirement results in both pronounced browridges and in much more supraorbital bone than is necessary to counter routine cyclical stress during mastication and incision. This in turn explains why bone strains recorded from the supraorbital region are extremely small relative to other portions of the primate face during mastication and incision.

Jaw muscle activity in relation to the direction and point of application of bite force

This study examined the way the masseter and the anterior and posterior temporal muscles of human subjects were activated when a bite force of constant magnitude was exerted at different teeth in different defined directions. Subjects were instructed to produce a bite force of a particular magnitude (250 N) and direction (vertical, anterior, lateral, posterior, or medial) using a three-component force transducer and a feedback method. Simultaneously, the EMG activity of the muscles was registered with use of surface electrodes. Unilateral bite forces were produced at the right canine, second premolar, and second molar. In addition, a bilateral vertical premolar bite was examined for comparison of activity levels of the muscles of both sides. The results showed that, on average, the activities of the right and left side muscles did not differ in a bilateral vertical bite. Moreover, in a unilateral vertical bite, there were no significant right-left differences. For all bite force directions, more muscle activity was required for production of a constant bite force at the anterior side of the dental arch than at the posterior side. An exception to this rule was the activity of the posterior temporal muscle in a posteriorly directed bite. There was a close relationship between the direction of bite force and jaw muscle activity. Variations in activity were small for the anterior temporal muscle and large for the posterior temporal and masseter muscles. All muscles that were studied were always active, even in directions in which they could be expected to act antagonistically.

The relationship between masseter force and masseter electromyogram during mastication in the monkey Macaca fascicularis

In five adult monkeys, electromyograms (EMGs) were recorded from bipolar surface electrodes positioned over the superficial masseter and from bipolar fine-wire electrodes within both the superficial and deep masseter. Relative masseter force was estimated by measuring surface bone strain from the lateral aspect of the zygomatic arch using rosette strain gauges. Multiple step-wise regression procedures demonstrated that peak values of the averaged masseter EMG could often explain a considerable amount of the variation of peak relative masseter force during mastication, i.e. r2 values ranged from 0.23 to 0.96 for the various single-electrode models and R2 values ranged from 0.78 to 0.96 for the various multiple-electrode models. The r2 values for relative masseter force and EMG data from the surface electrodes ranged from 0.69 to 0.96, and, on average, EMG data from surface electrodes provided somewhat more information about overall relative muscle force than data from fine-wire electrodes. The R2 values for a two-electrode model, consisting of data from surface electrodes over the superficial masseter and fine-wire electrodes in the posterior portion of the deep masseter, ranged from 0.78 to 0.95. The latency between the averaged surface EMG and relative muscle force was determined and the data indicated that the surface EMG usually preceded muscle force. This latency tended to decrease gradually throughout the entire power stroke of mastication. At peak values, the surface EMG preceded muscle force by about 22 ms. Towards the end of the power stroke, i.e. the 25% of peak values during unloading, muscle force may actually precede the average EMG.

A theoretical model of loading and eminence development of the postnatal human temporomandibular joint

The objectives of the present study were to characterize the loading of the immature TMJ, and to develop a theoretical model to explain the relationship between joint loading and development of the eminence of the human TMJ. The osteological remains of forty individuals, ages ranging from birth to twenty years, were used to provide metric coordinates of the three-dimensional relationships of the anatomy of the biting apparatus. The data were used, in a numerical model of TMJ loading (Smith et al., 1986), to calculate the magnitudes and directions of condylar loading. The following conclusions were drawn: (i) static equilibrium cannot be satisfied unless the immature TMJ is loaded; (ii) in the neonate, the direction of condylar loading is approximately vertical but, as the child matures, the angle of condylar loading becomes more oblique; and (iii) evidence is given in support of the hypothesis that early development of the eminence is consequent upon the stimulation of bone growth by the appropriate position and timing of loading of the immature condyle on the temporal component of the joint.

Loading patterns and jaw movements during mastication in Macaca fascicularis: a bone-strain, electromyographic, and cineradiographic analysis

Rosette strain gage, electromyography (EMG), and cineradiographic techniques were used to analyze loading patterns and jaw movements during mastication in Macaca fascicularis. The cineradiographic data indicate that macaques generally swallow frequently throughout a chewing sequence, and these swallows are intercalated into a chewing cycle towards the end of a power stroke. The bone strain and jaw movement data indicate that during vigorous mastication the transition between fast close and the power stroke is correlated with a sharp increase in masticatory force, and they also show that in most instances the jaws of macaques are maximally loaded prior to maximum intercuspation, i.e. during phase I (buccal phase) occlusal movements. Moreover, these data indicate that loads during phase II (lingual phase) occlusal movements are ordinarily relatively small. The bone strain data also suggest that the duration of unloading of the jaw during the power stroke of mastication is largely a function of the relaxation time of the jaw adductors. This interpretation is based on the finding that the duration from 100% peak strain to 50% peak strain during unloading closely approximates the half-relaxation time of whole adductor jaw muscles of macaques. The EMG data of the masseter and medial pterygoid muscles have important implications for understanding both the biomechanics of the power stroke and the external forces responsible for the "wishboning" effect that takes place along the mandibular symphysis and corpus during the power stroke of mastication. Although both medial pterygoid muscles reach maximum EMG activity during the power stroke, the activity of the working-side medial pterygoid peaks after the balancing-side medial pterygoid. Associated with the simultaneous increase of force of the working-side medial pterygoid and the decrease of force of the balancing-side medial pterygoid is the persistently high level of EMG activity of the balancing-side deep masseter (posterior portion). This pattern is of considerable significance because the direction of force of both the working-side medial pterygoid and the balancing-side deep masseter are well aligned to aid in driving the working-side lower molars across the upper molars in the medial direction during unilateral mastication.(ABSTRACT TRUNCATED AT 400 WORDS)

The effects of digastric muscle tenotomy on jaw opening in the rabbit

The digastric and geniohyoid muscles of the rabbit both produce jaw-opening torque. Anatomic and biomechanical analysis, and electromyography of normal chewing, are not wholly adequate in determining the roles of these two synergists. Cinematographic and electromyographic records of pellet and carrot chewing were obtained before and after tenotomy of both digastric muscles. After tenotomy, jaw opening occurred more slowly and maximum gape was reduced for both foods. However, the overall frequency of chewing was unchanged, and the jaw muscles did not change their contraction patterns. Changes in opening speed and amount of gape result from loss of functional digastric muscles, not fully compensated for by the synergistic geniohyoids. The changes in opening speed and maximum gape are consistent with a biomechanical analysis which predicts a maximal contribution to jaw-opening torque by the geniohyoid muscle of about 25 per cent at the start of opening, and a substantial reduction of this torque in the course of the opening movement.