Micro-CT and mechanical evaluation of subchondral trabecular bone structure between postmenopausal women with osteoarthritis and osteoporosis

Polystyrene microplastic-induced endoplasmic reticulum stress contributes to growth plate endochondral ossification disorder in young rat

BACKGROUND

Previous studies on the effects of microplastics (MPs) on bone in early development are limited. This study aimed to investigate the adverse effects of MPs on bone in young rats and the potential mechanism.

METHODS

Three-week-old female rats were orally administered MPs for 28 days, and endoplasmic reticulum (ER) stress inhibitor salubrinal (SAL) and ER stress agonist tunicamycin (TM) were added to evaluate the effect of ER stress on toxicity of MPs. The indicators of growth and plasma markers of bone turnover were evaluated. Tibias were analyzed using micro-computed tomography (micro-CT). Histomorphological staining of growth plates was performed, and related gene expression of growth plate chondrocytes was tested.

RESULTS

After exposure of MPs, the rats had decreased growth, shortened tibial length, and altered blood calcium and phosphorus metabolism. Trabecular bone was sparse according to micro-CT inspection. In the growth plate, the thickness of proliferative zone substantial reduced while the thickness of hypertrophic zone increased significantly, and the chondrocytes were scarce and irregularly arranged according to tibial histological staining. The transcription of the ER stress-related genes BIP, PERK, ATF4, and CHOP dramatically increased, and the transcription factors involved in chondrocyte proliferation, differentiation, apoptosis, and matrix secretion were aberrant according to RT-qPCR and western blotting. Moreover, the addition of TM showed higher percentage of chondrocyte death. Administration of SAL alleviated all of the MPs-induced symptoms.

CONCLUSION

These results indicated that MPs could induce growth retardation and longitudinal bone damage in early development. The toxicity of MPs may attribute to induced ER stress and impaired essential processes of the endochondral ossification after MPs exposure.

Predicting the Fracture Toughness of Human Cancellous Bone in Fractured Neck of Femur Patients Using Bone Volume and Micro-Architecture

The current protocol used to determine if an individual is osteoporotic relies on assessment of the individual's bone mineral density (BMD), which allows clinicians to judge the condition of a patient with respect to their peers. This, in essence, evaluates a person's fracture risk, because BMD is a good surrogate measure for strength and stiffness. In recent studies, the authors were the first to produce fracture toughness (FT) data from osteoporotic (OP) and osteoarthritic (OA) patients, by using a testing technique which basically analyzes the prerequisite stress conditions for the onset of growth of a major crack through cancellous bone tissue. FT depends mainly on bone quantity (BV/TV, bone volume/tissue volume), but also on bone micro-architecture (mArch), the inner trabecular design of the bone. The working research hypothesis of the present study is that mArch offers added prediction power to BV/TV in determining FT parameters. Consequently, our aim was to investigate the use of predictive models for fracture toughness and also to investigate if there are any significant differences between the models produced from samples loaded across (AC, transverse to) the main trabecular orientation and along (AL, in parallel) the trabeculae. In multilinear regression analysis, we found that the strength of the relationships varied for a crack growing in these two orthogonal directions. Adding mArch variables in the Ac direction helped to increase the R2 to 0.798. However, in the AL direction, adding the mArch parameters did not add any predictive power to using BV/TV alone; BV/TV on its own could produce R2 = 0.730. The present results also imply that the anisotropic layout of the trabeculae makes it more difficult for a major crack to grow transversely across them. Cancellous bone models and remodels itself in a certain way to resist fracture in a specific direction, and thus, we should be mindful that architectural quality as well as bone quantity are needed to understand the resistance to fracture.

A pilot study: effect of irisin on trabecular bone in a streptozotocin-induced animal model of type 1 diabetic osteopathy utilizing a micro-CT

Background

Osteoporosis is a significant co-morbidity of type 1 diabetes mellitus (DM1) leading to increased fracture risk. Exercise-induced hormone 'irisin' in low dosage has been shown to have a beneficial effect on bone metabolism by increasing osteoblast differentiation and reducing osteoclast maturation, and inhibiting apoptosis and inflammation. We investigated the role of irisin in treating diabetic osteopathy by observing its effect on trabecular bone.

Methods

DM1 was induced by intraperitoneal injection of streptozotocin 60 mg/kg body weight. Irisin in low dosage (5 µg twice a week for 6 weeks I/P) was injected into half of the control and 4-week diabetic male Wistar rats. Animals were sacrificed six months after induction of diabetes. The trabecular bone in the femoral head and neck was analyzed using a micro-CT technique. Bone turnover markers were measured using ELISA, Western blot, and RT-PCR techniques.

Results

It was found that DM1 deteriorates the trabecular bone microstructure by increasing trabecular separation (Tb-Sp) and decreasing trabecular thickness (Tb-Th), bone volume fraction (BV/TV), and bone mineral density (BMD). Irisin treatment positively affects bone quality by increasing trabecular number p < 0.05 and improves the BMD, Tb-Sp, and BV/TV by 21-28%. The deterioration in bone microarchitecture is mainly attributed to decreased bone formation observed as low osteocalcin and high sclerostin levels in diabetic bone samples p < 0.001. The irisin treatment significantly suppressed the serum and bone sclerostin levels p < 0.001, increased the serum CTX1 levels p < 0.05, and also showed non-significant improvement in osteocalcin levels.

Conclusions

This is the first pilot study to our knowledge that shows that a low dose of irisin marginally improves the trabecular bone in DM1 and is an effective peptide in reducing sclerostin levels.

Inhibition of miR-6215 rescued low subchondral bone mass caused by maternal exposure to dexamethasone in female offspring rats

Osteoporotic osteoarthritis is primarily associated with low subchondral bone mass. However, the mechanisms and therapeutic targets of osteoporotic osteoarthritis caused by prenatal dexamethasone exposure (PDE) in offspring remain unclear. In this study, pregnant Wistar rats were injected with dexamethasone to obtain bone tissue from fetal and postnatal rat offspring for analysis. Bone marrow mesenchymal stem cells (BMSCs) were isolated in vitro to elucidate the underlying molecular mechanisms. We determined in vivo that PDE reduced subchondral bone mass in adult female rat offspring, which originated from dysplasia of the subchondral bone. PDE led to a continuous increase in miR-6215 expression, accompanied by a decrease in FERM domain-containing protein 6 (FRMD6) expression. In vitro, dexamethasone upregulated miR-6215 expression through the glucocorticoid receptor, thereby inhibiting FRMD6 expression, promoting the translocation of yes-associated protein 1 (YAP1) into the nucleus of BMSCs, and downregulating downstream osteogenic marker genes. Finally, the rAAV-miR-6215 inhibitor rescued the low subchondral bone mass and osteoarthritis susceptibility caused by PDE in rat offspring. In conclusion, increased expression of miR-6215 mediates low subchondral bone mass caused by PDE through FRMD6/YAP1 signaling. Therefore, miR-6215 is a promising therapeutic target for PDE-induced low subchondral bone mass in offspring.

Exploring the micromorphological characteristics of adult lower cervical vertebrae based on micro-computed tomography

We will use micro-computed tomography to scan 31 sets of the adult lower cervical vertebrae (155 vertebrae) to observe the morphological characteristics and direction of trabeculae in the lower cervical vertebrae by outlining and reconstructing the regions of interest and to calculate the variation laws of the microstructure in the regions of interest to reveal their structural characteristics and weak areas. As a result, the images showed that the trabeculae in the lower cervical pedicle near the medial and lateral cortices were relatively dense, and their bone plates were lamellar. There were cavities between the superior and inferior articular processes where the ossification centers had not been absorbed after ossified. The lamellar trabeculae in the vertebral plates near the cortical bones were only 1-2 layers, extended and transformed into rod-shaped trabeculae in a radial shape toward the medullary space. The lamellar trabeculae of the vertebral plate extend over the spinous process near the cortical bone. The statistical results of the trabeculae's morphological parameters showed significant differences in bone volume fraction values among the four parts (P < 0.05). There were substantial differences in BS/BV, except for no differences between the pedicle and the vertebral plate (P < 0.05). There was a significant difference in trabecular pattern factor values between the articular process, the spinous process, and the vertebral plate (P < 0.05) and a significant difference between the pedicle, the spinous process, and the vertebral plate (P < 0.05). There were no significant differences in trabecular bone thickness and trabecular space values among the four parts (P < 0.05). The anatomical microstructural perspective confirms that the optimal choice is internal fixation via the pedicle. If using pedicle screws, the nail tract needs to be placed into the spinous process to increase its holding power and resistance to extraction.

Examination of the microstructures of the lower cervical facet based on micro-computed tomography: A cadaver study

The cervical facet has complicated 3D microstructures and inhomogeneities. The cervical facet joint, which also participates in the formation, plays a certain role in regulating and limiting the movement of the spine. Correct identification and evaluation of its microstructure can help in the diagnosis of orthopedic disease and predict early phases of fracture risk. To evaluate the safety of the cervical spine by measuring and analyzing the microstructures and morphometric parameters of bone trabeculae in the normal cervical facet with high-resolution 3D micro-computed tomography. Thirty-one sets of C3 to C7 lower cervical vertebrae (155 vertebrae) were scanned using micro-computed tomography. The morphological characteristics and direction of trabecular bone in the facet of the lower cervical vertebrae were observed by selecting and rebuilding the areas of interest, and the changes in the microstructure of the areas of interest were calculated to reveal the structural characteristics and weak areas. Images indicated an ossified center between the superior and inferior articular processes of the lower cervical spine. The cellular bone trabeculae of the articular process had complex reticular microstructures. The trabecular bone plate near the cortical bone was lamellar and relatively dense, and it extended around and transformed into a network structure, and then into the rod-shaped trabecular bone. The rod-shaped trabeculae converged with the plate-shaped trabeculae with only 1 to 2 layers surrounding the trabeculae cavity. Statistical results of the morphological parameters of the trabecular bone showed that trabecular bone volume fraction values were significantly higher for C7 than for C3 to C6 (P < .05). There were significant differences between C7 and C3 to C5 and between C6 and C4 in bone surface area/bone volume (P < .05). There was a significant difference between C7 and C3 to C6 in trabecular bone thickness values (P < .05). The degree of anisotropy value was significantly smaller for C3 than for C6 and C7 (P < .05). The changes in the C3 to C7 microstructure were summarized in this study. The loading capacity and stress of the C7 articular process tended to be limited, and the risk of injury tended to be higher for the C7 articular process.

3D printed trabeculae conditionally reproduce the mechanical properties of the actual trabeculae - A preliminary study

Three-dimensional (3D) printing has been used to fabricate synthetic trabeculae models and to test mechanical behavior that cannot be recognized in the actual sample, but the extent to which 3D printed trabeculae replicate the mechanical behavior of the actual trabeculae remains to be quantified. The aim of this study was to evaluate the accuracy of 3D printed trabeculae in reproducing the mechanical properties of the corresponding actual trabeculae. Twelve human trabecular cubes (5 × 5 × 5 mm) were scanned by micro-CT to form the trabecular 3D model. Each trabecular 3D model was scaled ×2-, ×3-, ×4- and ×5-fold and then printed twice at a layer thickness of 60 μm using poly (lactic acid) (PLA). The actual trabecular cubes and the 3D-printed trabecular cubes were first compressed under a loading rate of 1 mm/min; another replicated stack of 3D-printed trabecular cubes was compressed under a strain rate of 0.2/min. The results showed that the stiffness of the printed cubes tended to increase, while the strength tended to converge when the magnification increased under the two loading conditions. The strain rate effect was found in the printed cubes. The correlation coefficient (R2) of the mechanical properties between the printed and actual trabeculae can reach up to 0.94, especially under ×3-, ×4- and ×5-fold magnification. In conclusion, 3D printing could be a potential tool to evaluate the mechanical behavior of actual trabecular tissue in vitro and may help in the future to predict the risk of fracture and even personalize the treatment evaluation for osteoporosis and other trabecular bone pathologies.

Medial tibial plateau sustaining higher physiological stress than the lateral plateau: based on 3D printing and finite element method

Background

Medial compartment knee osteoarthritis (KOA) accounts for most KOA cases, and increased trabecular bone volume fraction (BV/TV) is one of the pathological changes in the tibial plateau of KOA. How BV/TV changes before and after the menopause and its effects on medial compartment KOA are yet to be clarified.

Methods

Twenty femurs from twenty 12-week-old rats were included. The operated group underwent ovariectomy (to represent the osteoporosis condition), called the O group, and the non-operated group was the normal control, called the N group. Micro-CT scans of the femoral condyles were acquired 12 weeks after the surgery, and the volume of interest (VOI) of medial-, inter-, and lateral-condyle trabeculae were three-dimensional (3D) printed for uniaxial compression mechanical test and simulated by the finite element (FE) method.

Results

The results demonstrated that the O group indicated poorer trabecular architecture than the N group in three parts of the femoral condyle, especially in the intercondyle. Within the group, the BV/TV, trabecular thickness (Tb.Th), and trabecular number (Tb.N) ratios between the medial and lateral condyles were greater than 1 in both N and O groups. The medial condyle trabeculae's mechanical properties were higher than those of the lateral condyle, and this superiority appears to be broadened under osteoporotic conditions. FE modelling well reproduced these mechanical differentiations.

Conclusions

According to Wolff's law, the higher BV/TV and mechanical properties of the medial femoral condyle may be due to inherent imbalanced loading on the knee component. Alterations in BV/TV and their corresponding mechanical properties may accompany KOA.

Spatial links between subchondral bone architectural features and cartilage degeneration in osteoarthritic joints

Early diagnosis of osteoarthritis (OA), before the onset of irreversible changes is crucial for understanding the disease process and identifying potential disease-modifying treatments from the earliest stage. OA is a whole joint disease and affects both cartilage and the underlying subchondral bone. However, spatial relationships between cartilage lesion severity (CLS) and microstructural changes in subchondral plate and trabecular bone remain elusive. Herein, we collected femoral heads from hip arthroplasty for primary osteoarthritis (n = 7) and femoral neck fracture (n = 6; non-OA controls) cases. Samples were regionally assessed for cartilage lesions by visual inspection using Outerbridge classification and entire femoral heads were micro-CT scanned. Scans of each femoral head were divided into 4 quadrants followed by morphometric analysis of subchondral plate and trabecular bone in each quadrant. Principal component analysis (PCA), a data reduction method, was employed to assess differences between OA and non-OA samples, and spatial relationship between CLS and subchondral bone changes. Mapping of the trabecular bone microstructure in OA patients with low CLS revealed trabecular organisation resembling non-OA patients, whereas clear differences were identifiable in subchondral plate architecture. The OA-related changes in subchondral plate architecture were summarised in the first principle component (PC1) which correlated with CLS in all quadrants, whilst by comparison such associations in trabecular bone were most prominent in the higher weight-bearing regions of the femoral head. Greater articular cartilage deterioration in OA was regionally-linked with lower BV/TV, TMD and thickness, and greater BS/BV and porosity in the subchondral plate; and with thinner, less separated trabeculae with greater TMD and BS/BV in the trabecular bone. Our findings suggest that impairment of subchondral bone microstructure in early stage of OA is more readily discernible in the cortical plate and that morphological characterisation of the femoral head bone microstructure may allow for earlier OA diagnosis and monitoring of progression.

The bone microstructure from anterior cruciate ligament footprints is similar after ligament reconstruction and does not affect long-term outcomes

PURPOSE

The purpose of this study was to assess the quality of the bone tissue microstructure from the footprints of the anterior cruciate ligament (ACL) and its impact on late follow-up outcomes in patients who undergo anterior cruciate ligament reconstruction (ACLR).

METHODS

The records of 26 patients diagnosed with a completely torn ACL who underwent ACLR were collected. During the surgery performed using the Felmet method, bone blocks from the native ACL footprints were collected. The primary measurements of the bone microstructure were made using a microtomographic scanner. In late follow-up examinations, a GNRB arthrometer was used.

RESULTS

There was no significant difference in the bone microstructure assessed using micro-CT histomorphometric data according to the blood test results, plain radiographs, age or anthropometric data. There was no difference in the bone volume/total volume ratio or trabecular thickness in the area of the native ACL footprints. Routine preoperative examinations were not relevant to the quality of the bone microstructure. The elapsed time from an ACL injury to surgery had no relevance to the results of arthrometry.

CONCLUSION

The similarities in the microstructure of bone blocks from ACL footprints from the femur and tibia allow the variable use of these blocks to stabilize grafts in the Felmet method. The bone microstructure is not dependent on the time from injury to surgery. Histomorphometric values of the structure of the femoral and tibial ACL footprints have no impact on the long-term stability of the operated knee joint.

TRIAL REGISTRATION

The approval of the Bioethics Committee of the Silesian Medical Chamber in Katowice, Poland (resolution 16/2014) was given for this research.

LEVEL OF EVIDENCE

II.

Subchondral bone microarchitecture and mineral density in human osteoarthritis and osteoporosis: A regional and compartmental analysis

Osteoarthritis (OA) and osteoporosis (OP) are historically considered to be inversely correlated but there may be an overlap between the pathophysiology of the two diseases. This study aimed to investigate the subchondral bone microarchitecture and matrix mineralization, and the association between them in OA and OP in relation to the degree of cartilage degeneration. Fifty-six osteochondral plugs were collected from 16 OA femoral heads. They were graded on a regional basis according to the stages of cartilage degeneration, as evaluated by a new macroscopic and a modified microscopic grading system. Twenty-one plugs were collected from seven femoral heads with OP. Plugs were scanned by microcomputed tomography and the microarchitectural and mineral properties were obtained for both subchondral plate and trabecular bone. Microarchitecture and material and apparent densities of subchondral bone in OP were similar to regions with early cartilage degeneration but different from regions with advanced cartilage degradation in OA femoral heads. Subchondral trabecular bone was more mineralized than subchondral plate in both OP and OA, and this compartmental difference varied by severity of cartilage degradation. Furthermore, the relationship among trabecular bone volume fraction, tissue mineral density, and apparent bone density was similar in OP and different stages of OA. Subchondral bone microarchitecture and mineral properties in OP are different from OA in a regionalized manner in relation to stages of cartilage degeneration. Both regional and compartmental differences at structural, material, and cellular levels need to be studied to understand the transition of OA subchondral bone from being osteoporotic to sclerotic.

Prediction of mechanical properties of trabecular bone in patients with type 2 diabetes using damage based finite element method

Type-2 diabetic (T2D) and osteoporosis (OP) suffered patients are more prone to fragile fracture though the nature of alteration in areal bone mineral density (aBMD) in these two cases are completely different. Therefore, it becomes crucial to compare the effect of T2D and OP on alteration in mechanical and structural properties of femoral trabecular bone. This study investigated the effect of T2D, OP, and osteopenia on bone structural and mechanical properties using micro-CT, nanoindentation and compression test. Further, a nanoscale finite element model (FEM) was developed to predict the cause of alteration in mechanical properties. Finally, a damage-based FEM was proposed to predict the pathological related alteration of bone's mechanical response. The obtained results demonstrated that the T2D group had lower volume fraction (-18.25%, p = 0.023), young's modulus (-23.47%, p = 0.124), apparent modulus (-37.15%, p = 0.02), and toughness (-40%, p = 0.001) than the osteoporosis group. The damage-based FE results were found in good agreement with the compression experiment results for all three pathological conditions. Also, nanoscale FEM results demonstrated that the elastic and failure properties of mineralised collagen fibril decreases with increase in crystal size. This study reveals that T2D patients are more prone to fragile fracture in comparison to OP and osteopenia patients. Also, the proposed damage-based FEM can help to predict the risk of fragility fracture for different pathological conditions.

Acupotomy Contributes to Suppressing Subchondral Bone Resorption in KOA Rabbits by Regulating the OPG/RANKL Signaling Pathway

Subchondral bone lesions, as the crucial inducement for accelerating cartilage degeneration, have been considered as the initiating factor and the potential therapeutic target of knee osteoarthritis (KOA). Acupotomy, the biomechanical therapy guided by traditional Chinese meridians theory, alleviates cartilage deterioration by correcting abnormal mechanics. Whether this mechanical effect of acupotomy inhibits KOA subchondral bone lesions is indistinct. This study aimed to investigate the effects of acupotomy on inhibiting subchondral bone resorption and to define the possible mechanism in immobilization-induced KOA rabbits. After KOA modeling, 8 groups of rabbits (4w/6w acupotomy, 4w/6w electroacupuncture, 4w/6w model, and 4w/6w control groups) received the indicated intervention for 3 weeks. Histological and bone histomorphometry analyses revealed that acupotomy prevented both cartilage surface erosion and subchondral bone loss. Further, acupotomy suppressed osteoclast activity and enhanced osteoblast activity in KOA subchondral bone, showing a significantly decreased expression of tartrate-resistant acid phosphatase (TRAP), matrix metalloproteinases-9 (MMP-9), and cathepsin K (Ctsk) and a significantly increased expression of osteocalcin (OCN); this regulation may be mediated by blocking the decrease in osteoprotegerin (OPG) and the increase in NF-κB receptor activated protein ligand (RANKL). These findings indicated that acupotomy inhibited osteoclast activity and promoted osteoblast activity to ameliorate hyperactive subchondral bone resorption and cartilage degeneration in immobilization-induced KOA rabbits, which may be mediated by the OPG/RANKL signaling pathway. Taken together, our results indicate that acupotomy may have therapeutic potential in KOA by restoring the balance between bone formation and bone resorption to attenuate subchondral bone lesions.

Idealized conductance: A new method to evaluate stiffness of trabecular bone

Stiffness is an important parameter to evaluate the condition of trabecular bone in biomechanical and clinical research. Microstructural parameters are commonly used to evaluate stiffness, but the accuracy needs to be improved. In this study, the electrical conductance of trabecular bone was calculated based on an idealized condition: trabeculae were electrically conductive and isotropy, other constituents in the trabecular bone were not considered in the simulation. The idealized conductance was calculated to evaluate the stiffness of trabecular bone, and the accuracy was compared with microstructural parameters. Twenty-one cubic trabecular cubes (5 × 5 × 5 mm³ ) from three femoral heads were investigated. Microstructural parameters were measured through Micro-CT scanning. Nominal elastic modulus (E) and idealized conductance (G) of trabecular cubes were measured through micro-finite element analysis. Bone volume fraction (BV/TV) is the major microstructural parameter that determine the stiffness of trabecular bone. The correlation coefficient between BV/TV and E along three directions were 0.815 (X-axis), 0.729 (Y-axis) and 0.914 (Z-axis). The correlation between G and E were stronger (X-axis: r = 0.986, Y-axis: r = 0.986, Z-axis: r = 0.991). A regression model combining different microstructural parameters was built to evaluate stiffness, but the correlation between them were not significantly improved (X-axis: r = 0.831, Y-axis: r = 0.807, Z-axis: r = 0.905). Compared with microstructural parameters, idealized conductance was a better parameter to evaluate stiffness of trabecular bone.

Influence of Extracellular Vesicles Isolated From Osteoblasts of Patients With Cox-Arthrosis and/or Osteoporosis on Metabolism and Osteogenic Differentiation of BMSCs

Background: Studies with extracellular vesicles (EVs), including exosomes, isolated from mesenchymal stem cells (MSC) indicate benefits for the treatment of musculoskeletal pathologies as osteoarthritis (OA) and osteoporosis (OP). However, little is known about intercellular effects of EVs derived from pathologically altered cells that might influence the outcome by counteracting effects from “healthy” MSC derived EVs. We hypothesize, that EVs isolated from osteoblasts of patients with hip OA (coxarthrosis/CA), osteoporosis (OP), or a combination of both (CA/OP) might negatively affect metabolism and osteogenic differentiation of bone-marrow derived (B)MSCs.

Methods: Osteoblasts, isolated from bone explants of CA, OP, and CA/OP patients, were compared regarding growth, viability, and osteogenic differentiation capacity. Structural features of bone explants were analyzed via μCT. EVs were isolated from supernatant of naïve BMSCs and CA, OP, and CA/OP osteoblasts (osteogenic culture for 35 days). BMSC cultures were stimulated with EVs and subsequently, cell metabolism, osteogenic marker gene expression, and osteogenic differentiation were analyzed.

Results: Trabecular bone structure was different between the three groups with lowest number and highest separation in the CA/OP group. Viability and Alizarin red staining increased over culture time in CA/OP osteoblasts whereas growth of osteoblasts was comparable. Alizarin red staining was by trend higher in CA compared to OP osteoblasts after 35 days and ALP activity was higher after 28 and 35 days. Stimulation of BMSC cultures with CA, OP, and CA/OP EVs did not affect proliferation but increased caspase 3/7-activity compared to unstimulated BMSCs. BMSC viability was reduced after stimulation with CA and CA/OP EVs compared to unstimulated BMSCs or stimulation with OP EVs. ALP gene expression and activity were reduced in BMSCs after stimulation with CA, OP, and CA/OP EVs. Stimulation of BMSCs with CA EVs reduced Alizarin Red staining by trend.

Conclusion: Stimulation of BMSCs with EVs isolated from CA, OP, and CA/OP osteoblasts had mostly catabolic effects on cell metabolism and osteogenic differentiation irrespective of donor pathology and reflect the impact of tissue microenvironment on cell metabolism. These catabolic effects are important for understanding differences in effects of EVs on target tissues/cells when harnessing them as therapeutic drugs.

Validation of HR-pQCT against micro-CT for morphometric and biomechanical analyses: A review

High-resolution peripheral quantitative computed-tomography (HR-pQCT) has the potential to become a powerful clinical assessment and diagnostic tool. Given the recent improvements in image resolution, from 82 to 61 μm, this technology may be used to accurately quantify in vivo bone microarchitecture, a key biomarker of degenerative bone diseases. However, computational methods to assess bone microarchitecture were developed for micro computed tomography (micro-CT), a higher-resolution technology only available for ex vivo studies, and validation of these computational analysis techniques against the gold-standard micro-CT has been inconsistent and incomplete. Herein, we review methods for segmentation of bone compartments and microstructure, quantification of bone morphology, and estimation of mechanical strength using finite-element analysis, highlighting the need throughout for improved standardization across the field. Studies have relied on homogenous datasets for validation, which does not allow for robust comparisons between methods. Consequently, the adaptation and validation of novel segmentation approaches has been slow to non-existent, with most studies still using the manufacturer's segmentation for morphometric analysis despite the existence of better performing alternative approaches. The promising accuracy of HR-pQCT for capturing morphometric indices is overshadowed by considerable variability in outcomes between studies. For finite element analysis (FEA) methods, the use of disparate material models and FEA tools has led to a fragmented ability to assess mechanical bone strength with HR-pQCT. Further, the scarcity of studies comparing 62 μm HR-pQCT to the gold standard micro-CT leaves the validation of this imaging modality incomplete. This review revealed that without standardization, the capabilities of HR-pQCT cannot be adequately assessed. The need for a public, extendable, heterogeneous dataset of HR-pQCT and corresponding gold-standard micro-CT images, which would allow HR-pQCT users to benchmark existing and novel methods and select optimal methods depending on the scientific question and data at hand, is now evident. With more recent advancements in HR-pQCT, the community must learn from its past and provide properly validated technologies to ensure that HR-pQCT can truly provide value in patient diagnosis and care.

Differences in the microarchitectural features of the lateral collapsed lesion between osteonecrosis and subchondral insufficiency fracture of the femoral head

BACKGROUND

Like osteonecrosis of the femoral head (ONFH), subchondral insufficiency fracture of the femoral head (SIF) causes femoral head collapse. However, little is known about the differences between the two diseases regarding the morphological features of the collapsed lesion. We tested the hypothesis that the morphological features of the lateral collapsed lesion would differ between ONFH and SIF.

METHODS

Twenty femoral heads histopathologically diagnosed as ONFH (n = 10) or SIF (n = 10) were used in this study. In the lateral collapsed lesion of each femoral head, cubic regions of interest (ROIs) were selected within the collapsed subchondral area and the nearby non-collapsed subchondral area. Micro-CT-based microarchitectural parameters were compared between the ROIs in each disease. Additionally, correlations between histopathological and microarchitectural features were evaluated.

RESULTS

In ONFH, bone volume fraction, trabecular thickness, and bone mineral density in the collapsed area were all significantly lower than those in the nearby non-collapsed area where thickened bone trabeculae accompanied by appositional bone formation were invariably seen. On the other hand, in SIF there were no significant differences between the ROIs in any of these microarchitectural parameters. Histopathologically, varying degrees of callus formation overlying the fracture of the subchondral plate were seen around the lateral collapsed lesion.

CONCLUSION

The morphological features of the lateral collapsed lesion were inconsistent between ONFH and SIF, suggesting different pathomechanisms of femoral head collapse.

Composition and characteristics of trabecular bone in osteoporosis and osteoarthritis

BACKGROUND

Bone strength depends on multiple factors such as bone density, architecture and composition turnover. However, the role these factors play in osteoporotic fractures is not well understood.

PURPOSE

The aim of this study was to analyze trabecular bone architecture, and its crystal and organic composition in humans, by comparing samples taken from patients who had a hip fracture (HF) and individuals with hip osteoarthritis (HOA).

METHODS

The study included 31 HF patients and 42 cases of HOA who underwent joint replacement surgery between 1/1/2013 and 31/12/2013. Trabecular bone samples were collected from the femoral heads and analyzed using a dual-energy X-ray absorptiometry, micro-CT, and solid-state high-resolution magic-angle-spinning nuclear magnetic resonance (MAS-NMR) spectroscopy.

RESULTS

No differences in proton or phosphorus concentration were found between the two groups using ¹H single pulse, ³¹P single pulse, ³¹P single pulse with proton decoupling NMR spectroscopy, in hydroxyapatite (HA) c-axis or a-axis crystal length. Bone volume fraction (BV/TV), trabecular number (Tb.N), and bone mineral density (BMD) were higher in the HO group than in the HF group [28.6% ± 10.5 vs 20.3% ± 6.6 (p = 0.026); 2.58 mm^-1 ± 1.57 vs 1.5 mm^-1 ± 0.79 (p = 0.005); and 0.39 g/cm² ± 0.10 vs. 0.28 g/cm² ± 0.05 (p = 0.002), respectively]. The trabecular separation (Tp.Sp) was lower in the HO group 0.42 mm ± 0.23 compared with the HF group 0.58 mm ± 0.27 (p = 0.036). In the HO group, BMD was correlated with BV/TV (r = 0.704, p < 0.001), BMC (r = 0.853, p < 0.001), Tb.N (r = 0.653, p < 0.001), Tb.Sp (-0.561, p < 0.001) and ¹H concentration (-0.580, p < 0.001) in the HO group. BMD was not correlated with BV/TV, Tb.Sp, Tb.Th, Tb.N, Tb.PF, ¹H concentration or HA crystal size in the HF group.

CONCLUSIONS

Patients with HO who did not sustain previous hip fractures had a higher femoral head BMD, BV/TV, and Tb.N than HF patients. In HO patients, BMD was positively correlated with the BV/TV and Tb.N and negatively correlated with the femoral head organic content and trabecular separation. Interestingly, these correlations were not found in HF patients with relatively lower bone densities. Therefore, osteoporotic patients with similar low bone densities could have significant microstructural differences. No differences were found between the two groups at a HA crystal level.

Heterogeneous Strain Distribution in the Subchondral Bone of Human Osteoarthritic Femoral Heads, Measured with Digital Volume Correlation

Osteoarthritis (OA) is a chronic disease, affecting approximately one third of people over the age of 45. Whilst the etiology and pathogenesis of the disease are still not well understood, mechanics play an important role in both the initiation and progression of osteoarthritis. In this study, we demonstrate the application of stepwise compression, combined with microCT imaging and digital volume correlation (DVC) to measure and evaluate full-field strain distributions within osteoarthritic femoral heads under uniaxial compression. A comprehensive analysis showed that the microstructural features inherent in OA bone did not affect the level of uncertainties associated with the applied methods. The results illustrate the localization of strains at the loading surface as well as in areas of low bone volume fraction and subchondral cysts. Trabecular thickness and connectivity density were identified as the only microstructural parameters with any association to the magnitude of local strain measured at apparent yield strain or the volume of bone exceeding yield strain. This work demonstrates a novel approach to evaluating the mechanical properties of the whole human femoral head in case of severe OA.

Microstructural analysis of subchondral bone in knee osteoarthritis

The results of this study show increased formation of bone in the subchondral areas in advanced stages of osteoarthritis of the knee. These changes seem to be influenced by mechanical factors.

INTRODUCTION

Subchondral bone changes seem to contribute to the progression of knee osteoarthritis (OA). This study aimed to analyze subchondral bone microstructure in specimens of late-stage knee OA in respect to articular cartilage damage, meniscus integrity, and knee joint alignment.

METHODS

Thirty proximal tibiae of 30 patients (20 female and 10 male) with late-stage OA retrieved during total knee arthroplasty were scanned using a high-resolution micro-computed tomography. The scans were semi-automatically segmented into five volumes of interest. The volumes of interest were then further analyzed using commercially available software. The degree of articular cartilage damage was assessed semi-quantitatively by magnetic resonance imaging before surgery.

RESULTS

The mean bone fraction volume (bone volume/total volume (BV/TV)) in all weight-bearing locations was significantly higher compared to the non-weight-bearing reference point below the anterior cruciate ligament (p = 0.000). The mean BV/TV in the medial compartment was significantly higher compared to the lateral compartment (p = 0.007). As for the BV/TV in intact menisci, there was a significantly lower subchondral bone fraction volume compared to subluxated or luxated menisci in the medial (p = 0.020) and lateral compartment (p = 0.005). Varus alignment had a significantly higher subchondral BV/TV in the medial compartment, whereas valgus alignment had a significantly higher subchondral BV/TV in the lateral compartment (p = 0.011).

CONCLUSIONS

The results show significant differences of subchondral bone microstructural parameters in respect to cartilage damage, meniscus' structural integrity, and knee joint alignment. Therefore, subchondral bone changes seem to be a secondary process in the late-stage OA of the knee caused by mechanical changes.

Preparation of BMP-2 loaded MPEG-PCL microspheres and evaluation of their bone repair properties

Autologous or allogeneic bone grafts are common methods to treat bone defects. Bone tissue engineering combining carrier material with the active factor can induce a generation of new bone at the bone defect site. However, its clinical application is restricted by the limited donors, the high morbidity at the donor site, the low activity in vivo, and dose-independent adverse effect. To overcome the limitations of traditional therapies, it is urgent to find and develop a repair material that can replace natural bones. Hence, we designed and prepared suitable MPEG-PCL microspheres loaded bone morphogenetic protein-2 (BMP-2/MPEG-PCL-MS) to effectively solve the problem mentioned above, prolong its reaction time at the targeted site, and avoid the pain of patients caused by frequent administration. The physicochemical properties and in vitro release behaviors were good. The microspheres showed high biocompatibility and strongly induced osteogenesis in vivo. BMP-2/MPEG-PCL-MS has been proven to exert sustained-release in vivo and maintain the inherent BMP-2 activity. They can be directly injected into the bone defect site, or implanted to a large bone defect site together with stent material to exert therapeutic effects. Hence, this smart drug delivery system has promising potential for clinical applications and provides a well-controlled design for combination of tissue engineering and pharmaceutics for further exploration.

Differences in subchondral trabecular bone microstructure and finite element analysis-based biomechanical properties between osteoporosis and osteoarthritis

Background/Objective

The microstructure of the subchondral trabecular bone, including the composition and distribution of plates and rods, has an important influence on the disease progression and mechanical properties of osteoarthritis (OA) and osteoporosis (OP). We aimed to determine whether differences in plates and rods influence the variations in the quantities and qualities of the subchondral trabecular bone between OA and OP.

Materials and methods

Thirty-eight femoral head samples [OA, n = 13; OP, n = 17; normal control (NC), n = 8] were collected from male patients undergoing total hip arthroplasty. They were scanned using microcomputed tomography, and subchondral trabecular structures were analysed using individual trabecular segmentation. Micro-finite element analysis (μFEA) was applied to assess the mechanical property of the trabecular bone. Cartilage changes were evaluated by using histological assessment. Analysis of variance was used to compare intergroup differences in structural and mechanical properties and cartilage degradation. Pearson analysis was used to evaluate the relationship between the trabecula microstructure and biomechanical properties.

Results

Compared with the OP and NC group, there was serious cartilage damage in the OA group. With respect to the microstructure results, the OA group had the highest plate and rod trabecular microstructures including number and junction density among the three groups. For the mechanical properties detected via μFEA, the OA group had higher stiffness and failure load than did the OP group. Pearson analysis revealed that compared with OP, OA had a higher number of microstructure parameters (e.g., rod bone volume fraction and rod trabecular number) that were positively correlated with its mechanical property.

Conclusions

Compared with OP, the OA subchondral bone has both increased plate and rod microarchitecture and has more microstructures positively related with its mechanical property. These differences may help explain the variation in mechanical properties between these bone diseases.

The translational potential of this article

Our findings suggested that changes in the plates and rods of the subchondral trabecular bone play a critical role in OA and OP progression and that the improvement of the subchondral trabecular bone may be a promising treatment approach.

Neuropeptides are associated with pain threshold and bone microstructure in ovariectomized rats

OBJECTIVES

Postmenopausal osteoporosis (PMO) is a metabolic skeletal disorder with impaired bone density and bone quality in postmenopausal women. The aim of the present study was to investigate the correlation between neuropeptides, bone microstructure and pain threshold in ovariectomized (OVX) rats.

METHODS

Female rats were randomly divided into the ovariectomized (OVX) group and the sham surgery (SHAM) group. Bone microstructure and immunocytochemistry for substance P (SP), calcitonin gene-related peptide (CGRP), vasoactive intestinal peptide (VIP) and neuropeptide Y (NPY) in tibial and DRG were performed. Pain threshold was assessed at post-operative 11 weeks. Pearson correlation coefficients were calculated between neuropeptides, bone microstructure and pain threshold.

RESULTS

Significant decreases in bone volume fraction (BV/TV) and trabecular number (Tb. N) but significant increases in trabecular spacing (Tb.Sp) were showed in OVX group. Mechanical pain threshold (MPT) in OVX group was significantly decreased. The MOD values for SP, CGRP and VIP of tibial in OVX group were significantly lower, whereas NPY, NPY1R and NPY2R were significantly higher. And SP, CGRP, VIP, NPY and NPY2R of DRG were significantly increased in OVX group, while NPY1R was significantly decreased. Correlation analysis showed that NPY, Y1R and Y2R in bone were negatively correlated with BV/TV. MPT was negatively correlated with NPY and Y2R in DRG, and positively correlated with Y1R in DRG.

CONCLUSIONS

Our results suggested that SP, CGRP, VIP and NPY were involved in the osteoporotic bone microstructure and mechanical hypersensitivity in OVX rats, indicating the potential to utilize neuropeptides as novel therapeutic targets for PMO.

Neuropeptide Y1 receptor antagonist promotes osteoporosis and microdamage repair and enhances osteogenic differentiation of bone marrow stem cells via cAMP/PKA/CREB pathway

Osteoporosis is a common metabolic bone disorder in the elderly population. The accumulation of bone microdamage is a critical factor of osteoporotic fracture. Neuropeptide Y (NPY) has been reported to regulated bone metabolism through Y1 receptor (Y1R). In this study the effects and mechanisms of Y1R antagonist on prevention for osteoporosis were characterized. In the clinical experiment, compared with osteoarthritis (OA), osteoporosis (OP) showed significant osteoporotic bone microstructure and accumulation of bone microdamage. NPY and Y1R immunoreactivity in bone were stronger in OP group, and were both correlated with bone volume fraction (BV/TV). In vivo experiment, Y1R antagonist significantly improved osteoporotic microstructure in the ovariectomized (OVX) rats. And Y1R antagonist promoted RUNX2, OPG and inhibit RANKL, MMP9 in bone marrow. In vitro cell culture experiment, NPY inhibited osteogenesis, elevated RANKL/OPG ratio and downregulated the expression of cAMP, p-PKAs and p-CREB in BMSCs, treated with Y1R antagonist or 8-Bromo-cAMP could inhibit the effects of NPY. Together, Y1R antagonist improved the bone microstructure and reduced bone microdamage in OVX rats. NPY-Y1R could inhibit osteoblast differentiation of BMSCs via cAMP/PKA/CREB pathway. Our findings highlight the regulation of NPY-Y1R in bone metabolism as a potential therapy strategy for the prevention of osteoporosis and osteoporotic fracture.

Subchondral bone dysplasia partly participates in prenatal dexamethasone induced-osteoarthritis susceptibility in female offspring rats

Prenatal dexamethasone exposure (PDE) induces developmental toxicities of multi-organs and susceptibility to multi-diseases in offspring. However, the effects of PDE on osteoarthritis susceptibility in adult offspring and its mechanism have not been reported. In the present study, we treated pregnant Wistar rats with dexamethasone (0.2 mg/kg) daily on gestational days (GD) 9-20. Some pregnant rats were sacrificed on GD20, and the rest were delivered to obtain the postnatal offspring. The adult female offspring rats were performed with ovariectomy or sham operation during postnatal weeks 22-28. We found that PDE led to osteoarthritis phenotypes in articular cartilage and an increase in modified Mankin's score, but reduced the cartilage thickness in female adult offspring rats, which were more evident after ovariectomy. Moreover, PDE reduced the bone mass of subchondral bone in female adult offspring, which was aggravated by ovariectomy. The correlation analysis results indicated that the osteoarthritic phenotype and cartilage thickness were closely associated with the decreased bone mass of subchondral bone induced by PDE. Further, PDE retarded the development of primary and secondary ossification centers, then led to subchondral bone dysplasia, which could be partly mediated by the inhibited osteogenic function before and after birth. Collectively, the subchondral bone dysplasia partly participated in osteoarthritis susceptibility induced by PDE in female offspring rats.

Neuropeptide Y1 Receptor Antagonist Alters Gut Microbiota and Alleviates the Ovariectomy-Induced Osteoporosis in Rats

A plethora of evidence has suggested that gut microbiota is involved in the occurrence and development of postmenopausal osteoporosis (PMO). It has been suggested that neuropeptide Y (NPY) modulates the bone metabolism through Y1 receptor (Y1R), and might be associated with gut microbiota. The present study aims to evaluate the anti-osteoporotic effects of Y1R antagonist and to investigate the potential mechanism by which Y1R antagonist regulates gut microbiota. In this study, eighteen female rats were randomly divided into three groups: the sham surgery (SHAM) group, the ovariectomized (OVX) group, and OVX+BIBO3304 group. After 6 weeks following surgery, Y1R antagonist BIBO3304 was administered to the rats in OVX+BIBO3304 group for 7 days. The bone microstructure and serum biochemical parameters were measured at 12 weeks after operation. The differences in the gut microbiota were analyzed by 16S rDNA gene sequencing. Heat-map and Spearman's correlation analyses were constructed to investigate the correlations between microbiota and bone metabolism-related parameters. The results indicated that OVX+BIBO3304 group showed significantly higher BMD, BV/TV, Tb.Th, Tb.N, Conn.D, and serum Ca²⁺ level than those in OVX group. Additionally, Y1R antagonist changed the gut microbiota composition with lower Firmicutes/Bacteroidetes ratio and higher proportions of some probiotics, including Lactobacillus. The correlation analysis showed that the changes of gut microbiota were closely associated with bone microstructure and serum Ca²⁺ levels. Our results suggested that Y1R antagonist played an anti-osteoporotic effect and regulated gut microbiota in OVX rats, indicating the potential to utilize Y1R antagonist as a novel treatment for PMO.

A new approach to comprehensively evaluate the morphological properties of the human femoral head: example of application to osteoarthritic joint

Osteoarthritis affects the morphological properties of the femoral head. The goal of this study was to develop a method to elucidate whether these changes are localised to discrete regions, or if the reported trends in microstructural changes may be identified throughout the subchondral bone of the human femoral head. Whole femoral heads extracted from osteoarthritic (n = 5) and healthy controls (n = 5) underwent microCT imaging 39 μm voxel size. The subchondral bone plate was virtually isolated to evaluate the plate thickness and plate porosity. The trabecular bone region was divided into 37 volumes of interest spatially distributed in the femoral head, and bone morphometric properties were determined in each region. The study showed how the developed approach can be used to study the heterogeneous properties of the human femoral head affected by a disease such as osteoarthritis. As example, in the superior femoral head osteoarthritic specimens exhibited a more heterogeneous micro-architecture, with trends towards thicker cortical bone plate, higher trabecular connectivity density, higher trabecular bone density and thicker structures, something that could only be observed with the newly developed approach. Bone cysts were mostly confined to the postero-lateral quadrants extending from the subchondral region into the mid trabecular region. Nevertheless, in order to generalise these findings, a larger sample size should be analysed in the future. This novel method allowed a comprehensive evaluation of the heterogeneous micro-architectural properties of the human femoral head, highlighting effects of OA in the superior subchondral cortical and trabecular bone. Further investigations on different stages of OA would be needed to identify early changes in the bone.

The use of μCT and fractal dimension for fracture prediction in osteoporotic individuals

Osteoporosis (OP) is a widespread condition with commonly associated fracture sites at the hip, vertebra and wrist. This study examines the effects of age and osteoporosis on bone quality by comparing the efficacy of using parameters which indicate bone quality (both traditional clinical parameters such as bone mineral density (BMD), as well as apparent Young's modulus determined by finite element analysis, among others) to predict fracture. Non-fracture samples were collected from the femoral heads of 83 donors (44 males, 39 females), and fracture samples were obtained from the femoral heads of 17 donors (female). Microarchitectural parameters (Bone Volume/Total Volume [BV/TV], Bone Surface/Bone Volume [BS/BV], Tissue Mineral Density [TMD, etc.]) were measured from μCT of each sample as well as 2D and 3D fractal dimension (D^2D and D^3D respectively). A cube was cropped from μCT images and an isotropic hexahedral element was assigned to each voxel. Finite element analysis was used to calculate the Young's modulus for each sample. Overall, values for microarchitectural characteristics, fractal dimension measurements and Young's Modulus were consistent with values within literature. Significant correlations are observed between age and BV/TV for non-fracture males and females, as well as between age and volumetric BMD (_vBMD) for the same groups. Significant differences are present between age-matched non-fracture and fracture females for BV/TV, BS/BV, _vBMD, TMD, D^2D, D^3D, (p < 0.01 for all). Properties which are not age dependent are significantly different between age-matched non-fracture and fracture specimens, indicating OP is a disease, and not just an accelerated aging process.

Melatonin Reverses the Loss of Stemness Induced by TNF-α in Human Bone Marrow Mesenchymal Stem Cells through Upregulation of YAP Expression

Mesenchymal stem cells (MSCs) are promising candidates for tissue regeneration and disease treatment. However, long-term in vitro culture results in loss of MSC stemness. The inflammation that occurs at stem cell transplant sites (such as that resulting from TNF-α) is a contributing factor for stem cell treatment failure. Currently, there is little evidence regarding the protective role of melatonin with regard to the negative effects of TNF-α on the stemness of MSCs. In this study, we report a melatonin-based method to reduce the inflammatory effects on the stemness of bone marrow mesenchymal stem cells (BMMSCs). The results of colony formation assays, Alizarin red staining, western blotting, and reverse transcription-polymerase chain reactions suggest that melatonin can reverse the inflammatory damage caused by TNF-α treatment in the third, seventh, and tenth generations of primary BMMSCs (vs. control and the TNF-α-treated group). Meanwhile, a detailed analysis of the molecular mechanisms showed that the melatonin receptor and YAP signaling pathway are closely related to the role that melatonin plays in negative inflammatory effects against BMMSCs. In addition, in vivo experiments showed that melatonin could reverse the damage caused by TNF-α on bone regeneration by BMMSCs in nude mice. Overall, our results suggest that melatonin can reverse the loss of stemness caused by inflammatory factor TNF-α in BMMSCs. Our results also provide a practical strategy for the application of BMMSCs in tissue engineering and cell therapy.

Subchondral bone deterioration in femoral heads in patients with osteoarthritis secondary to hip dysplasia: A case-control study

Objectives

Residual hip dysplasia is the most common underlying condition leading to secondary osteoarthritis (OA) of the hip. Subchondral bone alterations in OA secondary to hip dysplasia (HD-OA) are poorly investigated. The aim of the present study was to analyse the microarchitecture, bone remodelling and pathological alterations of subchondral bone in femoral heads from patients with HD-OA.

Methods

Subchondral bone specimens were extracted from both weight-bearing and non–weight-bearing regions of femoral heads from 20 patients with HD-OA and 20 patients with osteoporotic femoral neck fracture, during hip replacement surgery. Micro-CT and histological examination were performed to assess the microarchitecture and histopathological changes.

Results

The weight-bearing subchondral bone showed significantly more sclerotic microarchitecture and higher bone remodelling level in HD-OA as compared with osteoporosis. In the non–weight-bearing region, the two diseases shared similar microarchitectural characteristics, but higher bone remodelling level was detected in HD-OA. Distinct regional differences were observed in HD-OA, whereas the two regions exhibited similar characteristics in osteoporosis. In addition, HD-OA displayed more serious pathological alterations, including subchondral bone cyst, metaplastic cartilaginous tissue, bone marrow oedema and fibrous tissue, especially in the weight-bearing region.

Conclusions

Osteoarthritic deteriorations of subchondral bone induced by hip dysplasia spread throughout the whole joint, but exhibit region-dependent variations, with the weight-bearing region more seriously affected. Biomechanical stress might exert a pivotal impact on subchondral bone homeostasis in hip dysplasia.

The translational potential of this article

The histomorphometric findings in the project indicate an early intervention for the development of hip dysplasia in clinic.

Different subchondral trabecular bone microstructure and biomechanical properties between developmental dysplasia of the hip and primary osteoarthritis

Objective

Developmental dysplasia of the hip (DDH) is recognized as a frequent cause of secondary osteoarthritis (OA). The purpose in this study was to compare structural and biomechanical properties of subchondral trabecular bone ​and its relationship with cartilage damage between patients with DDH and patients with primary hip OA.

Methods

Forty-three femoral head specimens obtained from patients who underwent total hip arthroplasty [DDH, n ​= ​17; primary OA, n ​= ​16; and normal control (NC), n ​= ​10] were scanned by microcomputed tomography and analyzed by individual trabecula segmentation to obtain the microstructural types of subchondral trabecular bone. The biomechanical properties were analyzed by micro-finite element analysis, and cartilage damage was evaluated by histology. The linear regression analysis was used to indicate the association between microstructures, biomechanical property, and articular cartilage.

Results

The DDH group showed the lowest total bone volume fractions (BV/TV) and plate BV/TV in the three groups (p ​< ​0.05). There were also different discrepancies between the three groups in plate/rod trabecular number, plate/rod trabecular thickness, trabecular plate surface area/trabecular rod length, and junction density with different modes (plate-plate, rod-rod, and plate-rod junction density). The micro-finite element analysis, histology, and linear regression revealed that the subchondral trabecular bone in the DDH group had inferior biomechanical properties ​and cartilage damage of patients with DDH was more serious with different subchondral trabecular bone microstructures.

Conclusion

Our findings detected deteriorating subchondral trabecular bone microstructures in patients with DDH. The mass and type of subchondral trabecular bone play a key role in mechanical properties in DDH, which might be related to cartilage damage.

The translational potential of this article

Our findings suggested that changes of subchondral trabecular bone play a critical role ​in DDH progression and that the improvement on subchondral trabecular bone may be a sensitive and promising way in treatment of DDH.

Melatonin prevents bone destruction in mice with retinoic acid-induced osteoporosis

BACKGROUND

The protective effect of melatonin against bone metabolism imbalance in osteoporosis (OP) induced by drugs such as retinoic acid (RA) is unclear. The aim of this study was to explore the role of melatonin in bone destruction based on a mouse model.

METHODS

RA-induced OP model mice were established. To assess the effect of melatonin on these mice, micro-CT was used to characterize the trabecular structure of normal mice and those treated with RA (model), RA + low-dose melatonin (Mlt-L), RA + high-dose melatonin (Mlt-H), and RA + alendronate sodium (positive control). The shape of the trabecular bone, the length and diameter of the femoral head and the height and diameter of vertebra(L1) of each group were also measured and the number of osteoclasts was determined by Tartrate-resistant acid phosphatase (TRACP) staining. Meanwhile, the expression of alkaline phosphatase (ALP) was evaluated by immunohistochemistry assays. The differences between groups in terms of liver and kidney oxidation-related indexes and serum and urinary indicators related to bone metabolism were also analyzed. Furthermore, qRT-PCR and western blotting were used to evaluate the effect of melatonin on osteogenic and osteoclastic differentiation in MC3T3-E1 and RAW264.7 cells, respectively.

RESULTS

RA induction led to a decrease in the amount and density of trabecular bone, a decrease in the length and diameter of the femur and height, diameter of the vertebra (L1), a decrease in bone mass and density and the expression of ALP, and an increase in the number of osteoclasts. Melatonin treatment alleviated these effects induced by RA, increasing the amount of trabecular bone in OP mice, improving the microstructure of the femur and vertebra(L1) and increasing bone mass bone density and the expression of ALP, as well as decreasing the number of osteoclasts. Additionally, blood and urinary bone metabolism-related indicators showed that melatonin promoted bone formation and inhibited bone resorption. Determination of oxidant and antioxidant biomarkers in the livers and kidneys of the mice revealed that melatonin promoted the antioxidant level and suppressed the level of oxidant molecules in these organs. In vitro, RA promoted osteoclasts and inhibit osteogenesis by increasing oxidative stress levels in the RAW264.7 and MC3T3-E1 cells, but melatonin reversed this effect. Melatonin may, therefore, play a role in the ERK/SMAD and NF-κB pathways.

CONCLUSIONS

Melatonin can alleviate bone loss in RA-induced OP model mice, repair the trabecular microstructure, and promote bone formation. These effects may be related to reducing oxidation levels in vivo and vitro through the ERK/SMAD and NF-κB pathways.

The role of subchondral bone, and its histomorphology, on the dynamic viscoelasticity of cartilage, bone and osteochondral cores

OBJECTIVE

Viscoelastic properties of articular cartilage have been characterised at physiological frequencies. However, studies investigating the interaction between cartilage and subchondral bone and the influence of underlying bone histomorphometry on the viscoelasticity of cartilage are lacking.

METHOD

Dynamic Mechanical Analysis (DMA) has been used to quantify the dynamic viscoelasticity of bovine tibial plateau osteochondral cores, over a frequency sweep from 1 to 88 Hz. Specimens (approximately aged between 18 and 30 months) were neither osteoarthritic nor otherwise compromised. A maximum nominal stress of 1.7 MPa was induced. Viscoelastic properties of cores have been compared with that of its components (cartilage and bone) in terms of the elastic and viscous components of both structural stiffness and material modulus. Micro-computed tomography scans were used to quantify the histomorphological properties of the subchondral bone.

RESULTS

Opposing frequency-dependent loss stiffness, and modulus, trends were witnessed for osteochondral tissues: for cartilage it increased logarithmically (P < 0.05); for bone it decreased logarithmically (P < 0.05). The storage stiffness of osteochondral cores was logarithmically frequency-dependent (P < 0.05), however, the loss stiffness was typically frequency-independent (P > 0.05). A linear relationship between the subchondral bone plate (SBP) thickness and cartilage thickness (P < 0.001) was identified. Cartilage loss modulus was linearly correlated to bone mineral density (BMD) (P < 0.05) and bone volume (P < 0.05).

CONCLUSION

The relationship between the subchondral bone histomorphometry and cartilage viscoelasticity (namely loss modulus) and thickness, have implications for the initiation and progression of osteoarthritis (OA) through an altered ability of cartilage to dissipate energy.

Age-Related Changes in Femoral Head Trabecular Microarchitecture

Osteoporosis is a prevalent bone condition, characterised by low bone mineral density and increased fracture risk. Currently, the gold standard for identifying osteoporosis and increased fracture risk is through quantification of bone mineral density using dual energy X-ray absorption. However, many studies have shown that bone strength, and consequently the probability of fracture, is a combination of both bone mass and bone 'quality' (architecture and material chemistry). Although the microarchitecture of both non-fracture and osteoporotic bone has been previously investigated, many of the osteoporotic studies are constrained by factors such as limited sample number, use of ovariectomised animal models, and lack of male and female discrimination. This study reports significant differences in bone quality with respect to the microarchitecture between fractured and non-fractured human femur specimens. Micro-computed tomography was utilised to investigate the microarchitecture of femoral head trabecular bone from a relatively large cohort of non-fracture and fracture human donors. Various microarchitectural parameters have been determined for both groups, providing an understanding of the differences between fracture and non -fracture material. The microarchitecture of non-fracture and fracture bone tissue is shown to be significantly different for many parameters. Differences between sexes also exist, suggesting differences in remodelling between males and females in the fracture group. The results from this study will, in the future, be applied to develop a fracture model which encompasses bone density, architecture and material chemical properties for both female and male tissues.

Micro-architecture study of the normal odontoid with micro-computed tomography

Introduction: Odontoid fractures easily lead to instability, causing spinal cord injury. The aim of this study was to measure and analyze the micro-architecture and morphometric parameters of the normal odontoid with high-resolution three-dimensional (3D) micro-computed tomography (micro-CT).Methods: Micro-CT scans were obtained from five normal odontoid processes. The scanned data were reconstructed with micro-CT software, and the nutrient foramina and the ossification center of the base of the odontoid were revealed. The trabeculae of the odontoid were measured and divided into four parts to obtain the volume fraction of regions of interest.Results: High-resolution 3D images of the micro-structures' parameters were obtained from the odontoid using micro-CT software. The images demonstrated sponge-like trabecular bone, with the trabeculae showing a complex, net-like micro-construction. The subchondral bone plate was of lamella-like, compact construction and extended and transformed into a net-like structure with rod-shaped trabeculae arranged radially in all directions. There was a statistically significant difference in the volume fraction compared with the region of interest in the fourth part of the trabeculae and the first part of the odontoid (P < 0.05). The nutrient foramina and the ossification center of the odontoid were also observed.Conclusions: It is feasible to use high-resolution 3D micro-CT to evaluate the micro-architecture of the normal odontoid. Other studies can benefit from use of the micro-CT images, such as finite element evaluations.

Standardizing compression testing for measuring the stiffness of human bone

Objectives

The ability to determine human bone stiffness is of clinical relevance in many fields, including bone quality assessment and orthopaedic prosthesis design. Stiffness can be measured using compression testing, an experimental technique commonly used to test bone specimens in vitro. This systematic review aims to determine how best to perform compression testing of human bone.

Methods

A keyword search of all English language articles up until December 2017 of compression testing of bone was undertaken in Medline, Embase, PubMed, and Scopus databases. Studies using bulk tissue, animal tissue, whole bone, or testing techniques other than compression testing were excluded.

Results

A total of 4712 abstracts were retrieved, with 177 papers included in the analysis; 20 studies directly analyzed the compression testing technique to improve the accuracy of testing. Several influencing factors should be considered when testing bone samples in compression. These include the method of data analysis, specimen storage, specimen preparation, testing configuration, and loading protocol.

Conclusion

Compression testing is a widely used technique for measuring the stiffness of bone but there is a great deal of inter-study variation in experimental techniques across the literature. Based on best evidence from the literature, suggestions for bone compression testing are made in this review, although further studies are needed to establish standardized bone testing techniques in order to increase the comparability and reliability of bone stiffness studies.

Cite this article: S. Zhao, M. Arnold, S. Ma, R. L. Abel, J. P. Cobb, U. Hansen, O. Boughton. Standardizing compression testing for measuring the stiffness of human bone. Bone Joint Res 2018;7:524–538. DOI: 10.1302/2046-3758.78.BJR-2018-0025.R1.

Bone quality, and the combination and penetration of cement-bone interface: A comparative micro-CT study of osteoarthritis and rheumatoid arthritis

To compare the microstructure, bone quality, and the combination and penetration of cement-bone interface in tissue specimens from patients with osteoarthritis (OA) and rheumatoid arthritis (RA).A total of 80 femoral condyle tissue specimens from 20 OA patients (40 condyles) and 20 RA patients (40 condyles) who underwent total knee arthroplasty at the Department of Orthopaedics in Tengzhou Central People's Hospital were collected between January 2017 and September 2017. According to the random number table method, 20 specimens from the OA group were defined as group A, and 20 specimens in the RA group were defined as group B. The bone quality parameters were measured by micro-CT. The remaining 20 specimens in the OA group and the remaining 20 specimens in the RA group were defined as group C and group D, the cement-bone interfaces were established by the self-made bone cement compression device, and were analyzed by micro-CT.Micro-CT measurement revealed that the bone volume fraction (BV/TV), trabecular thickness (Tb.Th), and trabecular number (Tb.N) in group A were significantly higher than those in group B (all P < .05). The bone surface/bone volume (BS/BV), structure model index (SMI), trabecular separation (Tb.Sp), and degree of anisotropy (DA) in group A were significantly lower than those in group B (all P < .05). The penetration depth of bone cement in group D was significantly greater than those in group C via x-ray detection.The bone quality of OA patients is better than that of RA patients, but the combination and penetration of cement-bone interface of RA patients are better than that of OA patients. The findings advance our understanding of knee prosthesis and have important clinical implications, but they require validations in future studies with larger sample sizes.

Microstructural properties of trabecular bone autografts: comparison of men and women with and without osteoporosis

The microstructure of autologous bone grafts from men over 50 years old and postmenopausal women undergoing spinal fusion were evaluated using micro-CT. We demonstrated postmenopausal women, especially those with osteoporosis (OP) presented more serious microarchitectural deterioration of bone grafts.

PURPOSE

This study was undertaken to determine microstructural properties of cancellous bone used as autologous bone grafts from osteoporosis patients undergoing lumbar fusion by comparing microstructural indices to controls.

METHODS

Cancellous bone specimens from spinous processes were obtained from 41 postmenopausal women (osteoporosis women, n = 19; controls, n = 22) and 26 men over 50 years old (osteoporosis men, n = 8; controls, n = 18) during lumbar fusion surgery. The microstructural parameters were measured using micro-CT.

RESULTS

Significant difference in bone volume fraction (BV/TV), specific bone surface (BS/BV), trabecular thickness (Tb.Th), and structure model index (SMI) value existed between postmenopausal women with OP and controls. Significant difference in trabecular number (Tb.N) existed between men over 50 years old with OP and controls. Postmenopausal women exhibited lower BV/TV, Tb.Th, and higher SMI value than men over 50 years old. Postmenopausal women with OP exhibited lower BV/TV, Tb.Th, and higher BS/BV than men over 50 years old with OP.

CONCLUSIONS

Post-menopausal women and older men with OP have worse bone quality in autografts than non-osteoporotic men and women. Postmenopausal women with OP presented serious microarchitectural deterioration in older population.

Micro-finite-element method to assess elastic properties of trabecular bone at micro- and macroscopic level

OBJECTIVE OF THE STUDY

The objective of the present study is to assess the mechanical behavior of trabecular bone based on microCT imaging and micro-finite-element analysis. In this way two methods are detailed: (i) direct determination of macroscopic elastic property of trabecular bone; (ii) inverse approach to assess mechanical properties of trabecular bone tissue.

PATIENTS

Thirty-five females and seven males (forty-two subjects) mean aged (±SD) 80±11.7 years from hospitals of Assistance publique-Hôpitaux de Paris (AP-HP) diagnosed with osteoporosis following a femoral neck fracture due to a fall from standing were included in this study.

MATERIALS AND METHODS

Fractured heads were collected during hip replacement surgery. Standardized bone cores were removed from the femoral head's equator by a trephine in a water bath. MicroCT images acquisition and analysis were performed with CTan^® software and bone volume fraction was then determined. Micro-finite-element simulations were per-formed using Abaqus 6.9-2^® software in order to determine the macroscopic mechanical behaviour of the trabecular bone. After microCT acquisition, a longitudinal compression test was performed and the experimental macroscopic Young's Modulus was extracted. An inverse approach based on the whole trabecular bone's mechanical response and micro-finite-element analysis was performed to determine microscopic mechanical properties of trabecular bone.

RESULTS

In the present study, elasticity of the tissue was shown to be similar to that of healthy tissue but with a lower yield stress.

CONCLUSION

Classical histomorphometric analysis form microCT imaging associated with an inverse micro-finite-element method allowed to assess microscopic mechanical trabecular bone parameters.

Bone volume fraction and structural parameters for estimation of mechanical stiffness and failure load of human cancellous bone samples; in-vitro comparison of ultrasound transit time spectroscopy and X-ray μCT

Conventional mechanical testing is the 'gold standard' for assessing the stiffness (N mm^-1) and strength (MPa) of bone, although it is not applicable in-vivo since it is inherently invasive and destructive. The mechanical integrity of a bone is determined by its quantity and quality; being related primarily to bone density and structure respectively. Several non-destructive, non-invasive, in-vivo techniques have been developed and clinically implemented to estimate bone density, both areal (dual-energy X-ray absorptiometry (DXA)) and volumetric (quantitative computed tomography (QCT)). Quantitative ultrasound (QUS) parameters of velocity and attenuation are dependent upon both bone quantity and bone quality, although it has not been possible to date to transpose one particular QUS parameter into separate estimates of quantity and quality. It has recently been shown that ultrasound transit time spectroscopy (UTTS) may provide an accurate estimate of bone density and hence quantity. We hypothesised that UTTS also has the potential to provide an estimate of bone structure and hence quality. In this in-vitro study, 16 human femoral bone samples were tested utilising three techniques; UTTS, micro computed tomography (μCT), and mechanical testing. UTTS was utilised to estimate bone volume fraction (BV/TV) and two novel structural parameters, inter-quartile range of the derived transit time (UTTS-IQR) and the transit time of maximum proportion of sonic-rays (TTMP). μCT was utilised to derive BV/TV along with several bone structure parameters. A destructive mechanical test was utilised to measure the stiffness and strength (failure load) of the bone samples. BV/TV was calculated from the derived transit time spectrum (TTS); the correlation coefficient (R²) with μCT-BV/TV was 0.885. For predicting mechanical stiffness and strength, BV/TV derived by both μCT and UTTS provided the strongest correlation with mechanical stiffness (R²=0.567 and 0.618 respectively) and mechanical strength (R²=0.747 and 0.736 respectively). When respective structural parameters were incorporated to BV/TV, multiple regression analysis indicated that none of the μCT histomorphometric parameters could improve the prediction of mechanical stiffness and strength, while for UTTS, adding TTMP to BV/TV increased the prediction of mechanical stiffness to R²=0.711 and strength to R²=0.827. It is therefore envisaged that UTTS may have the ability to estimate BV/TV along with providing an improved prediction of osteoporotic fracture risk, within routine clinical practice in the future.

Femoral head trabecular micro-architecture in patients with osteoporotic hip fractures: Impact of bisphosphonate treatment

INTRODUCTION

Bisphosphonates are effective in preventing osteoporotic fractures. However, their limited efficacy of bisphosphonates has been suggested as a result of these drugs, which prevent the resorption of bone without improving bone connectivity. The trabecular microarchitecture in patients with osteoporotic hip fractures was evaluated according to their history of bisphosphonate treatment (BT).

METHODS

One hundred thirty-three patients with hip fractures admitted and treated between November 2014 and September 2016. The patients were divided into two groups based on whether they had received treatment with bisphosphonates for >3years or not [non-bisphosphonate-treated patients (NT)]. One-to-one propensity score matching generated 15 matched pairs of patients. Microstructural parameters of femoral head were measured by using micro-computed tomography (μCT). Mechanical compression test (Young's modulus, yield strength, and maximum compressive force) was performed following μCT.

RESULTS

Trabecular bone pattern factor (1.15±0.7mm^-1 versus 1.61±0.5mm^-1, p=0.037) and specific bone surface (14.1±0.8mm^-1 versus 15.4±1.9mm^-1, p=0.050) were significantly lower in the BT group than in the NT group. Furthermore, Young's modulus was significantly higher in the BT group than in the NT group (72.14±30.75MPa versus 47.89±29.89MPa, p=0.037). In both groups, trabecular bone pattern was the most closely correlated microstructural parameter to bone strength. Microstructural analysis demonstrated that bone connectivity was better preserved in the BT group than in the NT group.

CONCLUSIONS

Bisphosphonate treatment preserves bone mass and bone quality. The factors influencing osteoporotic hip fractures in patients treated with bisphosphonates warrant further research.

Bone Microarchitecture and Biomechanics of the Necrotic Femoral Head

The mechanism behind osteonecrosis of the femoral head (ONFH) remains unclear. The aim of this study was to explore the pathogenesis of ONFH from a biomechanical standpoint to provide a theoretical basis for improved treatments. We compared the bone structure of fractured femoral heads with that of necrotic femoral heads by Micro-CT scanning and histological evaluation. In addition, we compared the biomechanical properties of each zone in fractured femoral heads with those in necrotic femoral heads by using biomechanical tests. Compared with fractured femoral heads, bone microarchitecture and bone morphometry in necrotic zone and sclerotic zone of necrotic femoral heads have altered markedly. In addition, the biomechanical properties of the necrotic zone in femoral heads weaken markedly, while those of the sclerotic zone strengthen. We hypothesize that discordance between bone structure and function of the femoral head may be involved in the pathogenesis of ONFH and that more attention should be paid to the prevention and treatment of such discordance.

Predicting fractures using trabecular patterns on panoramic radiographs

OBJECTIVES

The observer score of the trabecular pattern on panoramic radiographs is known to be a strong predictor of bone fractures. The aim of this study was to enhance the predictive power of panoramic radiographs by means of texture analysis methods.

MATERIAL AND METHODS

The study followed 304 postmenopausal women during 26 years. At the beginning of the study, panoramic radiographs were obtained. One observer assessed the trabecular pattern in the premolar region as dense, sparse, or alternating dense and sparse. In addition, on each radiograph, a region of interest was selected in the molar/premolar region and analyzed with texture analysis procedures. During 26 years of follow-up, 115 women suffered a fracture of the hip, spine, leg, or arm. Logistic regression was applied to test the predictive power of various variables with respect to fractures.

RESULTS

Of all variables, the observer score of the trabecular pattern correlated strongest with the occurrence of fractures. By itself, the score yielded an ROC curve with an area of 0.80 under the curve. Combining the observer score with the texture analysis features increased the area under the ROC curve to 0.85.

CONCLUSIONS

The trabecular pattern on panoramic radiographs provides a strong predictor of fractures, at least for postmenopausal women. The assessment by an observer combined with texture analysis procedures yields a predictive power that parallels best known predictions in literature.

CLINICAL RELEVANCE

This study illustrates that panoramic radiographs are state of the art predictors of postcranial fractures.

Micro-computed tomography and mechanical evaluation of trabecular bone structure in osteopenic and osteoporotic fractures

PURPOSE

Osteopenia and osteoporosis are the two most common musculoskeletal disorders in the elderly population. We determined whether osteopenic and osteoporotic patients with fractures exhibit differences in trabecular morphology and biomechanical properties of bone.

METHODS

Fourteen osteopenic patients and 28 osteoporotic patients with hip fractures who underwent hemiarthroplasty for proximal femoral fractures caused by low-energy injury were included. Bone mineral density (BMD) measurements were performed. Compression tests and high-resolution micro-computed tomography were used to assess cancellous bone samples obtained from the principal compressive region of the femoral head.

RESULTS

The BMD values were lower in the osteoporotic patients than in the osteopenic patients ( p < 0.05). There was a significant difference in the yield stress values between the groups ( p < 0.05). However, no significant differences in the strain energy density, stiffness and Young's modulus were observed between the groups ( p > 0.05). The mean maximum stress was significantly higher in the osteoporotic patients than in the osteopenic patients ( p < 0.05). Although structural parameters, including bone volume (BV), BV fraction, trabecular thickness, trabecular connectivity density and trabecular number, were higher in the osteopenic patients, the differences were not significant ( p > 0.05). Trabecular separation values were significantly higher in the osteoporotic patients ( p < 0.05).

CONCLUSION

Our results showed that the trabecular morphology and biomechanical properties of bone were not significantly different between osteopenic and osteoporotic patients in terms of some parameters.

Comparison of tissue transglutaminase 2 and bone biological markers osteocalcin, osteopontin and sclerostin expression in human osteoporosis and osteoarthritis

Osteoporosis (OP) and osteoarthritis (OA) are the most common joint diseases, with a high incidence in the elderly population. OP is characterized by trabecular bone remodeling and reabsorption, whereas articular cartilage and subchondral bone remodeling are major features of OA. Although classically considered as independent or even conflicting processes, clinical coexistence of OP and OA was recently described. Transglutaminase 2 (TG2) expression is considered a biomarker of OA, but its role in osteoporotic bone remodeling is still uncertain. We investigated TG2 and bone biological markers (Osteocalcin, Osteopontin, and Sclerostin) in osteoporotic and osteoarthritic osteocartilagineous tissue (n = 54) and human chondrocyte cultures in vitro by immunohistochemistry, immunofluorescence and RT-PCR. Histomorphometric evaluation of bone trabecular remodeling was also performed. In cartilage, TG2 expression was faint in control and OP and significantly less than in OA and OP + OA chondrocytes; the opposite was found for Osteocalcin, whereas Osteopontin and Sclerostin expression was similar. In the subchondral trabecular bone, osteocytes/osteoblasts TG2 expression was slight and similar comparing control, OP, OA, and OP + OA group, whereas Osteocalcin and Osteopontin expression was lower in OP compared to control, OA and OP + OA. Increased TG2 and reduced Osteocalcin expression were maintained in human osteoarthritic chondrocytes in vitro. Histomorphometric analysis confirmed reduced trabecular bone mass in OP and OP + OA compared with OA patients. TG2 represented a suitable biomarker of osteoarthritic chondrocyte activation, whereas osteocalcin and osteopontin characterized osteoporotic osteocyte/osteoblast changes; differences were lost in OP + OA patients, suggesting careful consideration when coexistence of the two diseases occurs.

Correlation between neuropeptide distribution, cancellous bone microstructure and joint pain in postmenopausal women with osteoarthritis and osteoporosis

OBJECTIVES

To explore the relationship between the distribution of neuropeptides, cancellous bone microstructure and joint pain in postmenopausal women with osteoarthritis (OA) and osteoporosis (OP).

METHODS

Cancellous bone of the femoral head was obtained at the time of hip arthroplasty from 20 postmenopausal women, 10 with OA and 10 with OP. Pain intensity was evaluated using the visual analog scale (VAS) before the operation. The microstructural parameters were measured with micro-CT and the neuropeptides of the cancellous bone were stained by an immunohistochemical method.

RESULTS

We observed that BV/TV, Tb.Th and Th.N values in the OP were significantly decreased compared to those in the OA. Immunohistochemical analysis revealed that the mean optical density (MOD) values for SP, CGRP, and VIP in the OA group were significantly higher than those in the OP, and the MOD value for NPY in the OA was significantly lower than that in the OP. We also observed that the MOD values for SP were positively correlated with AD, BV/TV, Tb.Th, Tb.N and Conn.D and negatively with MD, Tb.Sp and SMI in all patients. The MOD values for CGRP were positively correlated with AD, BV/TV and Tb.Th. MOD values for VIP were positively correlated with BV/TV and Tb.Th and negatively with SMI. The VAS score was correlated positively with the MOD values for SP, CGRP, VIP and negatively with NPY in all patients.

CONCLUSIONS

Neuropeptides play an important role in the pathogenesis of OA and OP, which may cause pain and influence the bone microstructure.

The micro-architecture of human cancellous bone from fracture neck of femur patients in relation to the structural integrity and fracture toughness of the tissue

Osteoporosis is clinically assessed from bone mineral density measurements using dual energy X-ray absorption (DXA). However, these measurements do not always provide an accurate fracture prediction, arguably because DXA does not grapple with ‘bone quality’, which is a combined result of microarchitecture, texture, bone tissue properties, past loading history, material chemistry and bone physiology in reaction to disease. Studies addressing bone quality are comparatively few if one considers the potential importance of this factor. They suffer due to low number of human osteoporotic specimens, use of animal proxies and/or the lack of differentiation between confounding parameters such as gender and state of diseased bone. The present study considers bone samples donated from patients (n = 37) who suffered a femoral neck fracture and in this very well defined cohort we have produced in previous work fracture toughness measurements (FT) which quantify its ability to resist crack growth which reflects directly the structural integrity of the cancellous bone tissue. We investigated correlations between BV/TV and other microarchitectural parameters; we examined effects that may suggest differences in bone remodelling between males and females and compared the relationships with the FT properties. The data crucially has shown that TbTh, TbSp, SMI and TbN may provide a proxy or surrogate for BV/TV. Correlations between FT critical stress intensity values and microarchitecture parameters (BV/TV, BS/TV, TbN, BS/BV and SMI) for osteoporotic cancellous tissue were observed and are for the first time reported in this study. Overall, this study has not only highlighted that the fracture model based upon BMD could potentially be improved with inclusion of other microarchitecture parameters, but has also given us clear clues as to which of them are more influential in this role.

•

first time ever study to relate microarchitecture to the fracture toughness of cancellous bone from the femoral head of FNF victims

•

reduction in bone mass relates to a reduction in the number of trabeculae and trabecular thickness and an increase in trabeculae spacing

•

bone loss observed appears to be a consequence of thinning of the trabeculae in males and perforation of the trabeculae in females

•

study hints that TbTh, TbSp, SMI and TbN may provide a proxy or surrogate for BV/TV

•

fracture models can be improved by including microarchitecture, BMD and the bone mineral quality of osteoporotic cancellous bone