Accuracy of peripheral quantitative computed tomography (pQCT) for assessing area and density of mouse cortical bone

Osteological profiling of femoral diaphysis and neck in aquatic, semiaquatic, and terrestrial carnivores and rodents: effects of body size and locomotor habits

The increased limb bone density documented previously for aquatic tetrapods has been proposed to be an adaptation to overcome buoyancy during swimming and diving. It can be achieved by increasing the amount of bone deposition or by reducing the amount of bone resorption, leading to cortical thickening, loss of medullary cavity, and compaction of trabecular bone. The present study examined the effects of locomotor habit, body size, and phylogeny on the densitometric, cross-sectional, and biomechanical traits of femoral diaphysis and neck in terrestrial, semiaquatic, and aquatic carnivores, and in terrestrial and semiaquatic rodents (12 species) by using peripheral quantitative computed tomography, three-point bending, and femoral neck loading tests. Groupwise differences were analyzed with the univariate generalized linear model and the multivariate linear discriminant analysis supplemented with hierarchical clustering. While none of the individual features could separate the lifestyles or species adequately, the combinations of multiple features produced very good or excellent classifications and clusterings. In the phocid seals, the aquatic niche allowed for lower femoral bone mineral densities than expected based on the body mass alone. The semiaquatic mammals mostly had high bone mineral densities compared to the terrestrial species, which could be considered an adaptation to overcome buoyancy during swimming and shallow diving. Generally, it seems that different osteological properties at the levels of mineral density and biomechanics could be compatible with the adaptation to aquatic, semiaquatic, or terrestrial niches.

Bone Phenotyping Approaches in Human, Mice and Zebrafish - Expert Overview of the EU Cost Action GEMSTONE ("GEnomics of MusculoSkeletal traits TranslatiOnal NEtwork")

A synoptic overview of scientific methods applied in bone and associated research fields across species has yet to be published. Experts from the EU Cost Action GEMSTONE ("GEnomics of MusculoSkeletal Traits translational Network") Working Group 2 present an overview of the routine techniques as well as clinical and research approaches employed to characterize bone phenotypes in humans and selected animal models (mice and zebrafish) of health and disease. The goal is consolidation of knowledge and a map for future research. This expert paper provides a comprehensive overview of state-of-the-art technologies to investigate bone properties in humans and animals - including their strengths and weaknesses. New research methodologies are outlined and future strategies are discussed to combine phenotypic with rapidly developing -omics data in order to advance musculoskeletal research and move towards "personalised medicine".

Inhibition of vascular endothelial growth factor in young adult mice causes low bone blood flow and bone strength with no effect on bone mass in trabecular regions

Objective

To determine the effect of an antibody to vascular endothelial growth factor (VEGF) on bone blood flow, bone strength, and bone mass in the young adult mouse.

Methods

Ten-week-old male BALB/cJ mice were body weight-randomized into either a rodent anti-VEGF monoclonal antibody (anti-VEGF, B20-4.1.1; 5 mg/kg 2×/wk.; n = 12) group or a vehicle (VEH; n = 12) group. After 42 days, mice were evaluated for bone blood flow at the distal femur by ¹⁸F-NaF-PET/CT and then necropsied. Samples from trabecular and cortical bone regions were evaluated for bone strength by mechanical testing, bone mass by peripheral quantitative computed tomography (pQCT), and micoarchitecture (MicroCT). Hydration of the whole femur was studied by proton nuclear magnetic resonance relaxometry (¹H NMR).

Results

Distal femur blood flow was 43% lower in anti-VEGF mice than in VEH mice (p = 0.009). Ultimate load in the lumbar vertebral body was 25% lower in anti-VEGF than in VEH mice (p = 0.013). Bone mineral density (BMD) in the trabecular region of the proximal humeral metaphysis by pQCT, and bone volume fraction and volumetric BMD by MicroCT were the same in the two groups. Volume fraction of bound water (BW) of the whole femur was 14% lower in anti-VEGF than in VEH mice (p = 0.003). Finally, BW, but not cortical tissue mineral density, helped section modulus explain the variance in the ultimate moment experienced by the femur in three-point bending.

Conclusion

Anti-VEGF caused low bone blood flow and bone strength in trabecular bone regions without influencing BMD and microarchitecture. Low bone strength was also associated with low bone hydration. These data suggest that bone blood flow is a novel bone property that affects bone quality.

•

An antibody to vascular endothelial growth factor (anti-VEGF) caused low bone blood flow in a trabecular bone rich region.

•

Anti-VEGF did not affect trabecular bone region and bone hydration of the whole femur were also low, trabecular bone mass was not affected by anti-VEGF.

•

Bone blood flow may be a bone property that affects bone quality through bone hydration.

•

Anti-VEGF caused low trabecular bone strength in the vertebral body and low bone hydration of the whole femur.

Genetics of aging bone

With aging, the skeleton experiences a number of changes, which include reductions in mass and changes in matrix composition, leading to fragility and ultimately an increase of fracture risk. A number of aspects of bone physiology are controlled by genetic factors, including peak bone mass, bone shape, and composition; however, forward genetic studies in humans have largely concentrated on clinically available measures such as bone mineral density (BMD). Forward genetic studies in rodents have also heavily focused on BMD; however, investigations of direct measures of bone strength, size, and shape have also been conducted. Overwhelmingly, these studies of the genetics of bone strength have identified loci that modulate strength via influencing bone size, and may not impact the matrix material properties of bone. Many of the rodent forward genetic studies lacked sufficient mapping resolution for candidate gene identification; however, newer studies using genetic mapping populations such as Advanced Intercrosses and the Collaborative Cross appear to have overcome this issue and show promise for future studies. The majority of the genetic mapping studies conducted to date have focused on younger animals and thus an understanding of the genetic control of age-related bone loss represents a key gap in knowledge.

Dual-energy X-ray absorptiometry, peripheral quantitative computed tomography, and micro-computed tomography techniques are discordant for bone density and geometry measurements in the guinea pig

This study aims to examine agreement among bone mineral content (BMC) and density (BMD) estimates obtained using dual-energy X-ray absorptiometry (DXA), peripheral quantitative computed tomography (pQCT), and micro-computed tomography (μCT) against high-resolution μCT and bone ash of the guinea pig femur. Middle-aged (n = 40, 86 weeks) male guinea pigs underwent in vivo followed by ex vivo DXA (Hologic QDR 4500A) scanning for intact and excised femur BMC and areal density. To assess bone architecture and strength, excised femurs were scanned on pQCT (Stratec XCT 2000L) as well as on two μCT scanners (LaTheta LCT-200; Skyscan 1174), followed by three-point bending test. Reproducibility was determined using triplicate scans; and agreement assessed using Bland-Altman plots with reference methods being high-resolution μCT (Skyscan) for BMD and bone ashing for BMC. All techniques showed satisfactory ex vivo precision (CV 0.05-4.3 %). However, bias compared to the reference method was highest (207.5 %) in trabecular bone volume fraction (BV/TV) measured by LaTheta, and unacceptable in most total femur and cortical bone measurements. Volumetric BMD (vBMD) and BV/TV derived by LaTheta and pQCT at the distal metaphysis were biased from the Skyscan by an average of 49.3 and 207.5 %, respectively. Variability of vBMD, BV/TV and cross-sectional area at the diaphysis ranged from -5.5 to 30.8 %. LaTheta best quantified total femur BMC with an upper bias of 3.3 %. The observed differences among imaging techniques can be attributable to inherent dissimilarity in construction design, calibration, segmentation and scanning resolution used. These bone imaging tools are precise but are not comparable, at least when assessing guinea pig bones.

Lack of prolidase causes a bone phenotype both in human and in mouse

The degradation of the main fibrillar collagens, collagens I and II, is a crucial process for skeletal development. The most abundant dipeptides generated from the catabolism of collagens contain proline and hydroxyproline. In humans, prolidase is the only enzyme able to hydrolyze dipeptides containing these amino acids at their C-terminal end, thus being a key player in collagen synthesis and turnover. Mutations in the prolidase gene cause prolidase deficiency (PD), a rare recessive disorder. Here we describe 12 PD patients, 9 of whom were molecularly characterized in this study. Following a retrospective analysis of all of them a skeletal phenotype associated with short stature, hypertelorism, nose abnormalities, microcephaly, osteopenia and genu valgum, independent of both the type of mutation and the presence of the mutant protein was identified. In order to understand the molecular basis of the bone phenotype associated with PD, we analyzed a recently identified mouse model for the disease, the dark-like (dal) mutant. The dal/dal mice showed a short snout, they were smaller than controls, their femurs were significantly shorter and pQCT and μCT analyses of long bones revealed compromised bone properties at the cortical and at the trabecular level in both male and female animals. The differences were more pronounce at 1 month being the most parameters normalized by 2 months of age. A delay in the formation of the second ossification center was evident at postnatal day 10. Our work reveals that reduced bone growth was due to impaired chondrocyte proliferation and increased apoptosis rate in the proliferative zone associated with reduced hyperthrophic zone height. These data suggest that lack of prolidase, a cytosolic enzyme involved in the final stage of protein catabolism, is required for normal skeletogenesis especially at early age when the requirement for collagen synthesis and degradation is the highest.

Comparison of cortical bone measurements between pQCT and HR-pQCT

The primary purpose of this study was to determine the accuracy of tibial cortical thickness measurements derived from peripheral quantitative computed tomography (pQCT) with analysis based on the circular ring model, using high-resolution peripheral quantitative computed tomography (HR-pQCT) (isotopic voxel size of 82 μm) as a gold standard. The secondary objective was to evaluate whether the accuracy of the pQCT-based estimates of cortical thickness (CTh), cortical area (CoA), cortical density (CDen), and total area (TotA) improve with alterations of voxel size from the standard 0.5-0.2mm. Fifteen dry tibia specimens were immersed in saline in a sealed cylinder and scanned 22.5mm from the distal tibia plateau using pQCT and HR-pQCT. pQCT yielded higher values for CTh and CDen and lower values for CoA. The differences between imaging techniques increased as the average CTh increased. No systematic bias was observed for CDen, CoA, and TotA. Similar differences were found between pQCT with voxel size 0.2mm and HR-pQCT. Significant correlations were observed for CTh (R=0.97, p ≤ 0.0001), CDen (R=0.99, p ≤ 0.0001), CoA (R=0.98, p ≤ 0.0001), and TotA (R=1.0, p ≤ 0.0001) when pQCT- and HR-pQCT-derived values were compared irrespective of which voxel size was used. Measurement variability between the imaging techniques was evident. Future studies aimed at examining cortical structure with pQCT should note that there are differences between the 2 techniques.

High dietary intake of retinol leads to bone marrow hypoxia and diaphyseal endosteal mineralization in rats

Vitamin A (retinol) is the only molecule known to induce spontaneous fractures in laboratory animals and we have identified retinol as a risk factor for fracture in humans. Since subsequent observational studies in humans and old animal data both show that high retinol intake appears to only have small effects on bone mineral density (BMD) we undertook a mechanistic study of how excess retinol reduces bone diameter while leaving BMD essentially unaffected. We fed growing rats high doses of retinol for only 1 week. Bone analysis involved antibody-based methods, histology, pQCT, biomechanics and bone compartment-specific PCR together with Fourier Transform Infrared Spectroscopy of bone mineral. Excess dietary retinol induced weakening of bones with little apparent effect on BMD. Periosteal osteoclasts increased but unexpectedly endosteal osteoclasts disappeared and there was a reduction of osteoclastic serum markers. There was also a lack of capillary erythrocytes, endothelial cells and serum retinol transport protein in the endosteal/marrow compartment. A further indication of reduced endosteal/marrow blood flow was the increased expression of hypoxia-associated genes. Also, in contrast to the inhibitory effects in vitro, the marrow of retinol-treated rats showed increased expression of osteogenic genes. Finally, we show that hypervitaminotic bones have a higher degree of mineralization, which is in line with biomechanical data of preserved stiffness in spite of thinner bones. Together these novel findings suggest that a rapid primary effect of excess retinol on bone tissue is the impairment of endosteal/marrow blood flow leading to hypoxia and pathological endosteal mineralization.

Calcium supplementation does not rescue the programmed adult bone deficits associated with perinatal growth restriction

Low birth weight and poor childhood growth program a variety of adult diseases including bone disorders such as osteoporosis. We have previously reported that offspring born small, as a result of uteroplacental insufficiency, have shorter femurs, lower bone mineral content and a bone strength deficit as adults. The aim of this study was to determine the effects of calcium supplementation from adolescence on growth restricted male and female offspring which have a programmed bone deficit. Bilateral uterine vessel ligation (Restricted) or sham surgery (Control) was performed on gestational day 18 in WKY rats to induce uteroplacental insufficiency and growth restriction. At 2 months pups were allocated to one of four diet groups: diet 1-constant normal calcium diet, diet 2-variable normal calcium diet, diet 3-constant high calcium diet, diet 4-variable high calcium diet. Diet groups 1 and 3 were fed their respective diets constantly for the duration of the study. In groups 2 and 4, rats were fed one diet for 5 days, followed by a switch to a low calcium diet for the next 5 days. At 6 months Dual Energy Xray Absorptiometry (DXA) and Peripheral Quantitative Computed Tomography (pQCT) were performed on the right femur. Bone turnover markers were measured at 4 months. Male and female Restricted offspring were born 14% lighter compared to Controls (p<0.05). At 6 months both male and female Restricted offspring remained smaller and had shorter femurs compared to Controls (p<0.05). Restricted males and females had reduced trabecular and cortical content compared to Controls, regardless of diet (p<0.05). Trabecular bone density was lower in Restricted females only (p<0.05). A constant high calcium diet increased cortical BMD in Restricted male and both female groups (p<0.05). Measures of bone geometry indicated that Restricted offspring have narrower bones with preservation of absolute cortical thickness (p<0.05). Importantly, the stress strain index of bone bending strength was lower in male and female Restricted offspring, regardless of diet by up to 9.0% and 7.8%, respectively. DXA results were similar to pQCT results. Being born small, due to uteroplacental insufficiency, programs reduced adult femur length, dimensions and stress strain index. Supplementation with a high calcium diet from adolescence can increase adult cortical bone density in low birth weight males and females, and normal weight females. This increase in bone density was not sufficient to rescue the bone dimension and strength deficits which were programmed in utero, suggesting that the early life environment is critical for bone programming.

Beam hardening artifacts in micro-computed tomography scanning can be reduced by X-ray beam filtration and the resulting images can be used to accurately measure BMD

Bone mineral density (BMD) measurements are critical in many research studies investigating skeletal integrity. For pre-clinical research, micro-computed tomography (microCT) has become an essential tool in these studies. However, the ability to measure the BMD directly from microCT images can be biased by artifacts, such as beam hardening, in the image. This three-part study was designed to understand how the image acquisition process can affect the resulting BMD measurements and to verify that the BMD measurements are accurate. In the first part of this study, the effect of beam hardening-induced cupping artifacts on BMD measurements was examined. In the second part of this study, the number of bones in the X-ray path and the sampling process during scanning was examined. In the third part of this study, microCT-based BMD measurements were compared with ash weights to verify the accuracy of the measurements. The results indicate that beam hardening artifacts of up to 32.6% can occur in sample sizes of interest in studies investigating mineralized tissue and affect mineral density measurements. Beam filtration can be used to minimize these artifacts. The results also indicate that, for murine femora, the scan setup can impact densitometry measurements for both cortical and trabecular bone and morphologic measurements of trabecular bone. Last, when a scan setup that minimized all of these artifacts was used, the microCT-based measurements correlated well with ash weight measurements (R(2)=0.983 when air was excluded), indicating that microCT can be an accurate tool for murine bone densitometry.

Ultrasonic assessment of cortical bone thickness in vitro and in vivo

In osteoporosis, total bone mass decreases and the thickness of the cortical layer diminishes in the shafts of the long bones. In this study, a simple ultrasonic in vivo method for determining the thickness of the cortical bone layer was applied, and the suitability of two different signal analysis techniques, i.e., envelope and cepstral methods, for measuring cortical thickness was compared. The values of cortical thickness, as determined with both techniques, showed high linear correlations (r > or = 0.95) with the thickness values obtained from in vitro measurements with a caliper or in vivo measurements by peripheral quantitative CT (pQCT). No systematic errors that could be related to the cortical thickness were found. The in vivo accuracy of the measurements was 6.6% and 7.0% for the envelope and cepstral methods, respectively. Further, the in vivo precision for the envelope and cepstral methods was 0.26 mm and 0.28 mm, respectively. Although the results are similar for both of the techniques, the simplicity of the envelope method makes it more attractive for clinical applications. In conclusion, a simple ultrasound measurement provides an accurate estimate of the cortical bone thickness. The techniques investigated may have clinical potential for osteoporosis screening and therefore warrant more extensive clinical investigations with healthy and osteoporotic individuals.

Variations of microstructure, mineral density and tissue elasticity in B6/C3H mice

200-MHz scanning acoustic microscopy (SAM) and synchrotron radiation microCT (SR-microCT) were used to assess microstructural parameters, acoustic impedance Z and tissue degree of mineralization of bone (DMB) in site-matched regions of interest in femoral bone of two inbred strains. Transverse femoral sections taken from 5 C57BL/6J@Ico (B6) and 5 C3H/HeJ@Ico (C3H) mice (5.5 months old) were explored. Mass density rho, elastic coefficient c(11) and Young's modulus E(1) were locally derived in the distal epiphysis, distal metaphysis for trabecular bone and mid-diaphysis for cortical bone using a rule-of-mixture model. Structural parameter estimations obtained from X-ray tomographic and acoustic images were almost identical. Both strains had the same bone diameter, but the C3H mice had greater cortical thickness and smaller cancellous diameter than did B6 mice. The average DMB and impedance values were in the range between 1.13 and 1.33 g cm(-3) and 5.8 and 7.8 Mrayl, respectively. All tissue parameters were lower in B6 mice than in C3H mice. However, interstrain differences of DMB were much less (up to 3.8%) than differences of Z (up to 13.2%). SAM and SR-microCT fulfill the requirement for a simultaneous evaluation of cortical bone microstructure and material properties at the tissue level. However, SAM provides a quantitative estimate of elastic properties at the tissue level that cannot be captured by SR-microCT. The strong differences in the measured acoustic impedances among the two inbred strains indicate that the impedance is a good parameter to detect genetic variations of the skeletal phenotype in small animal models.

Exercise-induced changes in the cortical bone of growing mice are bone- and gender-specific

Fracture risk and mechanical competence of bone are functions of bone mass and tissue quality, which in turn are dependent on the bone's mechanical environment. Male mice have a greater response to non-weight-bearing exercise than females, resulting in larger, stronger bones compared with control animals. The aim of this study was to test the hypothesis that short-term weight-bearing running during growth (21 days starting at 8 weeks of age; 30 min/day; 12 m/min; 5 degrees incline; 7 days/week) would similarly have a greater impact on cross-sectional geometry and mechanical competence in the femora and tibiae of male mice versus females. Based on the orientation of the legs during running and the proximity of the tibia to the point of impact, this response was hypothesized to be greatest in the tibia. Exercise-related changes relative to controls were assayed by four-point bending tests, while volumetric bone mineral density and cross-sectional geometry were also assessed. The response to running was bone- and gender-specific, with male tibiae demonstrating the greatest effects. In male tibiae, periosteal perimeter, endocortical perimeter, cortical area, medial-lateral width and bending moment of inertia increased versus control mice suggesting that while growth is occurring in these mice between 8 and 11 weeks of age, exercise accelerated this growth resulting in a greater increase in bone tissue over the 3 weeks of the study. Exercise increased tissue-level strain-to-failure and structural post-yield deformation in the male tibiae, but these post-yield benefits came at the expense of decreased yield deformation, structural and tissue-level yield strength and tissue-level ultimate strength. These results suggest that exercise superimposed upon growth accelerated growth-related increases in tibial cross-sectional dimensions. Exercise also influenced the quality of this forming bone, significantly impacting structural and tissue-level mechanical properties.

Assessment of bone structure and acoustic impedance in C3H and BL6 mice using high resolution scanning acoustic microscopy

Two hundred-MHz time-resolved scanning acoustic microscopy was applied for the investigation of acoustic and structural bone properties of mice from two inbred strains. Transverse sections of femur taken from 5 C57BL/6J@Ico and 5 C3H/HeJ@Ico mice were explored. Both strains had the same bone diameter, but the C3H/HeJ@Ico mice had greater cortical thickness, smaller cancellous diameter, and greater acoustic impedance values than C57BL/6J@Ico mice. The strong differences in the measured acoustic impedances among the two inbred strains indicate that the impedance is a good parameter to detect genetic variations of the skeletal phenotype in small animal models.

The mechanical phenotype of biglycan-deficient mice is bone- and gender-specific

Biglycan (bgn) is a small leucine-rich proteoglycan (SLRP) enriched in the extracellular matrix of skeletal tissues. While bgn is known to be involved in the growth and differentiation of osteoblast precursor cells and regulation of collagen fibril formation, it is unclear how these functions impact bone's geometric and mechanical properties, properties which are integral to the structural function of bone. Because the genetic control of bone structure and function is both local- and gender-specific and because there is evidence of gender-specific effects associated with genetic deficiencies, it was hypothesized that the engineered deletion of the gene encoding bgn would result in a cortical bone mechanical phenotype that was bone- and gender-specific. In 11-week-old C57BL6/129 mice, the cortical bone in the mid-diaphyses of the femora and tibiae of both genders was examined. Phenotypic changes in bgn-deficient mice relative to wild type controls were assayed by four-point bending tests to determine mechanical properties at the whole bone (structural) and tissue levels, as well as analyses of bone geometry and bone formation using histomorphometry. Of the bones examined, bgn deficiency most strongly affected the male tibiae, where enhanced cross-sectional geometric properties and bone mineral density were accompanied by decreased tissue-level yield strength and pre-yield structural deformation and energy dissipation. Because pre-yield properties alone were impacted, this implies that the gene deletion causes important alterations in mineral and/or the matrix/mineral ultrastructure and suggests a new understanding of the functional role of bgn in regulating bone mineralization in vivo.

A physical phantom for the calibration of three-dimensional X-ray microtomography examination

X-ray microtomography is rapidly gaining importance as a non-destructive investigation technique, especially in the three-dimensional examination of trabecular bone. Appropriate quantitative three-dimensional parameters describing the investigated structure were introduced, such as the model-independent thickness and the structure model index. The first parameter calculates a volume-based thickness of the structure in three dimensions independent of an assumed structure type. The second parameter estimates the characteristic form of which the structure is composed, i.e. whether it is more plate-like, rod-like or even sphere-like. These parameters are now experiencing a great diffusion and are rapidly growing in importance. To measure the accuracy of these three-dimensional parameters, a physical three-dimensional phantom containing different known geometries and thicknesses, resembling those of the examined structures, is needed. Unfortunately, such particular phantoms are not commonly available and neither does a consolidated standard exist. This work describes the realization of a calibration phantom for three-dimensional X-ray microtomography examination and reports an application example using an X-ray microtomography system. The calibration phantom (external size 13 mm diameter, 23 mm height) was based on various aluminium inserts embedded in a cylinder of polymethylmethacrylate. The inserts had known geometries (wires, foils, meshes and spheres) and thicknesses (ranging from 20 microm to 1 mm). The phantom was successfully applied to an X-ray microtomography device, providing imaging of the inserted structures and calculation of three-dimensional parameters such as the model-independent thickness and the structure model index. With the indications given in the present work it is possible to design a similar phantom in a histology laboratory and to adapt it to the requested applications.

Regional differences in cortical bone mineral density in the weight-bearing long bone shaft--a pQCT study

This study used a multislice peripheral quantitative computed tomography (pQCT) to measure volumetric BMD (vBMD) and cortical thickness for investigating regional adaptation in lower tibial shaft in 72 healthy postmenopausal women aged 47-60. Tomographic slices were analysed on four distinct cortical regions: the anterior, posterior, medial and lateral cortical wall. One-way analysis of variance (ANOVA) test was used to compare the vBMD in the four regions. The results showed that the posterior cortex had the highest vBMD (1923 +/- 135.3 mg/cm(3)), significantly (P < 0.001) higher than the anterior cortex (1805 +/- 110.6 mg/cm(3)), medial cortex (1863 +/- 103.6 mg/cm(3)) and lateral cortex (1815 +/- 111.6 mg/cm(3)); whereas there was no significant difference (P > 0.05) between the medial and lateral cortices located near the neutral plane of bending. The anterior cortex had the greatest thickness (2.56 +/- 0.47 mm), significantly (P < 0.001) greater than that of the posterior cortex (2.11 +/- 0.27 mm), medial cortex (2.20 +/- 0.39 mm) and lateral cortex (2.03 +/- 0.29 mm). The vBMD of the posterior cortex was a significant 6.5% higher than that of the anterior cortex (P < 0.001); whereas the anterior cortical thickness was a significant 21.3% greater than that of the posterior cortex (P < 0.001). There was no linear relationship found between cortical vBMD and cortical thickness measured at the four cortical regions (r = 0.086, P > 0.05). In conclusion, the regional differences, with higher vBMD found in posterior cortex, might be a result of mechanical adaptation, which caused the posterior cortex to sustain higher compressive loading than the anterior tensile cortex during the landing phase in the gait cycles of individuals. Nevertheless, regional geometric adaptation in anterior cortical thickness might be adapted to accommodate for the reduced vBMD and to reduce the bending stress in this region.

Optimizing results from pQCT: reliability of operator-dependent pQCT variables in cadavers and humans with low bone mass

Peripheral quantitative computed tomography (pQCT) can assess bone geometric properties and separate cortical from trabecular bone. Despite pQCT's potential benefits for research, most reliability and accuracy studies have used a constant acquisition and analysis protocol. There are, however, numerous steps in the pQCT scan acquisition and analysis that are operator dependent. Whether or not these influence the quality of the pQCT scans and, potentially, the precision and validity of the data collected has been little explored. We investigated how pQCT outputs changed when operator-dependent parameters were varied, particularly when the bone of interest was of low mineral density. We found that bone parameters and scan failure rate varied significantly depending on the acquisition resolution; only one scan slice at the 10 and 30% radius is required to maintain adequate precision, and reference lines for sites should use a reproducible landmark. These results provide a foundation for recommending scan acquisition and analysis options for patients with low bone mass.