The three-dimensional morphometry and cell-cell communication of the osteocyte network in chick and mouse embryonic calvaria

Bundling of collagen fibrils influences osteocyte network formation during bone modeling

Osteocytes form a cellular network by gap junctions between their cell processes. This network is important since intercellular communication via the network is essential for bone metabolism. However, the factors that influence the formation of this osteocyte network remain unknown. As the early stage of osteocyte network formation occurs on the bone surface, we observed a newly formed trabecular bone surface by orthogonal focused ion beam-scanning electron microscopy. The embedding late osteoblast processes tended to avoid bundled collagen fibrils and elongate into sparse collagen fibrils. Then, we examined whether the inhibition of bundling of collagen fibrils using a potent lysyl oxidase inhibitor, β-aminopropionitrile (BAPN) changed the cellular network of the chick calvaria. The osteocyte shape of the control group was spindle-shape, while that of the BAPN group was sphere-shaped. In addition, the osteocyte processes of the control group were elongated vertically to the long axis of the cell body, whereas the osteocyte processes of the BAPN group were elongated radially. Therefore, it was suggested that the bundling of collagen fibrils influences normal osteocyte network formation during bone modeling.

Contributions of Resin Cast Etching to Visualising the Osteocyte Lacuno-Canalicular Network Architecture in Bone Biology and Tissue Engineering

Recent years have witnessed an evolution of imaging technologies towards sophisticated approaches for visualising cells within their natural environment(s) and for investigating their interactions with other cells, with adjacent anatomical structures, and with implanted biomaterials. Resin cast etching (RCE) is an uncomplicated technique involving sequential acid etching and alkali digestion of resin embedded bone to observe the osteocyte lacuno-canalicular network using scanning electron microscopy. This review summarises the applicability of RCE to bone and the bone-implant interface. Quantitative parameters such as osteocyte size, osteocyte density, and number of canaliculi per osteocyte, and qualitative metrics including osteocyte shape, disturbances in the arrangement of osteocytes and canaliculi, and physical communication between osteocytes and implant surfaces can be investigated. Ageing, osteoporosis, long-term immobilisation, spinal cord injury, osteoarthritis, irradiation, and chronic kidney disease have been shown to impact osteocyte lacuno-canalicular network morphology. In addition to titanium, calcium phosphates, and bioactive glass, observation of direct connectivity between osteocytes and cobalt chromium provides new insights into the osseointegration potential of materials conventionally viewed as non-osseointegrating. Other applications include in vivo and in vitro testing of polymer-based tissue engineering scaffolds and tissue-engineered ossicles, validation of ectopic osteochondral defect models, ex vivo organ culture of whole bones, and observing the effects of gene dysfunction/deletion on the osteocyte lacuno-canalicular network. Without additional contrast staining, any resin embedded specimen (including clinical biopsies) can be used for RCE. The multitude of applications described here attest to the versatility of RCE for routine use within correlative analytical workflows, particularly in biomaterials science.

Computational framework for analyzing flow-induced strain on osteocyte as modulated by microenvironment

Osteocytes buried in bone matrix are major mechanosensory cells that regulate bone remodeling in response to interstitial fluid flow in a lacuno-canalicular porosity. To gain an understanding of the mechanism of osteocyte mechanosensing, it is important to be able to evaluate the local strain on the osteocyte process membrane induced by the interstitial fluid flow. The microenvironment of the osteocytes, including the pericellular matrix (PCM) and canalicular ultrastructure, is a key modulator of the flow-induced strain on the osteocyte process membrane because it produces heterogeneous flow patterns in the pericellular space. To investigate the effect of changes in the microenvironment of osteocytes on the flow-induced strain, we developed a novel computational framework for analyzing the fluid-structure interaction. Computer simulations based on the proposed framework enabled evaluation of the spatial distribution of flow-induced strain on the osteocyte process membrane according to changes in the PCM density and canalicular curvature. The simulation results reveal that a decrease in PCM density and an increase in canalicular curvature, each of which is associated with aging and bone disease, have the notable effect of enhancing local flow-induced strain on the osteocyte process membrane. We believe that the proposed computational framework is a promising framework for investigating cell-specific mechanical stimuli and that it has the potential to accelerate the mechanobiological study of osteocytes by providing a deeper understanding of their mechanical environment in living bone tissue.

Gap junction with MLO-A5 osteoblast-like cell line induces ALP and BSP transcription of 3T3-L1 pre-adipocyte like cell line via Hspb1 while retaining adipogenic differentiation ability

In bone tissues, gap junctions form direct links between the cytoplasm of an osteocyte and another adjacent osteocyte or osteoblast, which underlie both bone formation and bone resorption. We have previously demonstrated that alkaline phosphatase (ALP) and bone sialoprotein (BSP), which are osteoblast markers, were induced in mesenchymal stem cells (MSCs) co-cultured with osteoblast-like cell line. However, the molecular mechanism of this process has not been fully addressed. Furthermore, few advances have been made toward elucidating the communication networks that link the status of committed cells such as (pre-) adipocytes that differentiated from MSCs as well as osteoblasts. Therefore, the objective of the present study was to investigate the mechanism underlying the communication network between pre-adipocytes and osteoblasts. We evaluated the effect of co-culture with osteoblast on the cell status of pre-adipocytes using murine osteoblast-like cell line, MLO-A5, and pre-adipocyte-like cell line, 3T3-L1, respectively. The results presented here demonstrated that osteoblasts and pre-adipocytes communicate via gap junctions, and the ensuing drastic increase in ALP and BSP transcription in co-cultured pre-adipocytes was induced, at least partly, via heat shock protein family B member 1 (Hspb1). In addition, terminal differentiation into adipocytes was suppressed in pre-adipocytes during co-culture with osteoblast without loss of adipogenic differentiation ability. Interestingly, after co-culture with osteoblasts, isolated co-cultured pre-adipocytes were able to differentiate to adipocytes as well as original pre-adipocytes. These results suggest that gap junctional communication with osteoblasts suppressed adipogenic differentiation of pre-adipocytes without loss of adipogenic differentiation ability.

Expression and functional regulation of gap junction protein connexin 43 in dermal mesenchymal stem cells from psoriasis patients

BACKGROUND

Psoriasis is a chronic recurrent inflammatory disease. Mesenchymal stem cells (MSCs) can regulate the inflammatory microenvironment, thereby controlling the proliferation, differentiation, and migration of immune cells. Connexin 43(Cx43), a key gap junction protein, has been shown to form gap junctions for communication between neighboring cells.

OBJECTIVE

We investigated the expression of Cx43 in dermal mesenchymal stem cells (DMSCs) derived from psoriasis patients and explored the relationship between the Cx43-mediated gap junction intercellular communication (GJIC) and DMSCs.

METHODS

Human DMSCs were isolated and propagated in adherent culture. Quantitative real-time reverse transcription PCR and western blot and immunofluorescence were used to detect the expression and localization of Cx43 in DMSCs. Fluorescence redistribution after photobleaching was performed to assess adjacent DMSCs GJIC. CCK8 was used to detect the proliferation of DMSCs before and after gap junction blocker (18α-glycyrrhetinic acid; AGA) treatment. Cell energy metabolism was analyzed with an energy metabolism analyzer.

RESULTS

Cx43 was located in the cytoplasm and cytomembrane, as well as partially in the nucleus of DMSCs. The expression of Cx43 in psoriasis DMSCs was higher than that in control samples and the gap junction function was enhanced. In addition, the glycolysis and mitochondrial respiration of psoriasis DMSCs were also enhanced. However, AGA inhibited the expression of Cx43, attenuated GJIC function, and inhibited the proliferation of DMSCs.

CONCLUSIONS

Our results indicated that the expression of Cx43 in DMSCs from psoriasis lesions is increased and that the inhibition of Cx43 leads to the inhibition of both GJIC and DMSCs proliferation.

Aging, Osteocytes, and Mechanotransduction

PURPOSE OF REVIEW

The bone is able to adapt its structure to mechanical signals via the bone remodeling process governed by mechanosensitive osteocytes. With aging, an imbalance in bone remodeling results in osteoporosis. In this review, we hypothesized that changes in lacunar morphology underlie the decreased bone mechanoresponsiveness to mechanical loading with aging.

RECENT FINDINGS

Several studies have reported considerable variations in the shape of osteocytes and their lacunae with aging. Since osteocytes can sense matrix strain directly via their cell bodies, the variations in osteocyte morphology may cause changes in osteocyte mechanosensitivity. As a consequence, the load-adaptive response of osteocytes may change with aging, even when mechanical loading would remain unchanged. Though extensive quantitative data is lacking, evidence exists that the osteocyte lacunae are becoming smaller and more spherical with aging. Future dedicated studies might reveal whether these changes would affect osteocyte mechanosensation and the subsequent biological response, and whether this is (one of) the pathways involved in age-related bone loss.

Mean-field approach to evolving spatial networks, with an application to osteocyte network formation

We consider evolving networks in which each node can have various associated properties (a state) in addition to those that arise from network structure. For example, each node can have a spatial location and a velocity, or it can have some more abstract internal property that describes something like a social trait. Edges between nodes are created and destroyed, and new nodes enter the system. We introduce a "local state degree distribution" (LSDD) as the degree distribution at a particular point in state space. We then make a mean-field assumption and thereby derive an integro-partial differential equation that is satisfied by the LSDD. We perform numerical experiments and find good agreement between solutions of the integro-differential equation and the LSDD from stochastic simulations of the full model. To illustrate our theory, we apply it to a simple model for osteocyte network formation within bones, with a view to understanding changes that may take place during cancer. Our results suggest that increased rates of differentiation lead to higher densities of osteocytes, but with a smaller number of dendrites. To help provide biological context, we also include an introduction to osteocytes, the formation of osteocyte networks, and the role of osteocytes in bone metastasis.

Strain uses gap junctions to reverse stimulation of osteoblast proliferation by osteocytes

Identifying mechanisms by which cells of the osteoblastic lineage communicate in vivo is complicated by the mineralised matrix that encases osteocytes, and thus, vital mechanoadaptive processes used to achieve load-bearing integrity remain unresolved. We have used the coculture of immunomagnetically purified osteocytes and primary osteoblasts from both embryonic chick long bone and calvariae to examine these mechanisms. We exploited the fact that purified osteocytes are postmitotic to examine both their effect on proliferation of primary osteoblasts and the role of gap junctions in such communication. We found that chick long bone osteocytes significantly increased basal proliferation of primary osteoblasts derived from an identical source (tibiotarsi). Using a gap junction inhibitor, 18β-glycyrrhetinic acid, we also demonstrated that this osteocyte-related increase in osteoblast proliferation was not reliant on functional gap junctions. In contrast, osteocytes purified from calvarial bone failed to modify basal proliferation of primary osteoblast, but long bone osteocytes preserved their proproliferative action upon calvarial-derived primary osteoblasts. We also showed that coincubated purified osteocytes exerted a marked inhibitory action on mechanical strain-related increases in proliferation of primary osteoblasts and that this action was abrogated in the presence of a gap junction inhibitor. These data reveal regulatory differences between purified osteocytes derived from functionally distinct bones and provide evidence for 2 mechanisms by which purified osteocytes communicate with primary osteoblasts to coordinate their activity.

Alternation in the gap-junctional intercellular communication capacity during the maturation of osteocytes in the embryonic chick calvaria

INTRODUCTION

The intercellular network of cell-cell communication among osteocytes is mediated by gap junctions. Gap junctional intercellular communication (GJIC) is thought to play an important role in the integration and synchronization of bone remodeling. To further understand the mechanism of bone development it is important to quantify the difference in the GJIC capacity of young and developmentally mature osteocytes.

MATERIALS AND METHODS

We first established an embryonic chick calvaria growth model to show the growth of the calvaria in embryos at 13 to 21days of age. We then applied a fluorescence recovery after photobleaching (FRAP) technique to compare the difference in the GJIC capacity of young osteocytes with that of developmentally mature osteocytes. Finally, we quantified the dye (Calcein) diffusion from the FRAP data using a mathematic model of simple diffusion which was also used to identify simple diffusion GJIC pattern cells (fitted model) and accelerated diffusion GJIC pattern cells (non-fitted model).

RESULTS

The relationship between the longest medial-lateral length of the calvaria (frontal bone) and the embryonic age fit a logarithmic growth model: length=5.144×ln(day)-11.340. The morphometric data during osteocyte differentiation showed that the cellular body becomes more spindle-shaped and that the cell body volume decreased by approximately 22% with an increase in the length of the processes between the cells. However, there were no significant differences in the cellular body surface area or in the distance between the mass centres of the cells. The dye-displacement rate in young osteocytes was significantly higher than that in developmentally mature osteocytes: dye displacement only occurred in 26.88% of the developmentally mature osteocytes, while it occurred in 64.38% of the young osteocytes. Additionally, in all recovered osteocytes, 36% of the developmentally mature osteocytes comprised non-fitted model cells while 53.19% of the young osteocytes were the non-fitted model, which indicates the active transduction of dye molecules. However, there were no statistically significant differences between the young and developmentally mature osteocytes with regard to the diffusion coefficient, permeability coefficient, or permeance of the osteocyte processes, which were 3.93±3.77 (×10(-8)cm(2)/s), 5.12±4.56 (×10(-5)cm(2)/s) and 2.99±2.47 (×10(-13)cm(2)/s) (mean±SD), respectively.

CONCLUSIONS

These experiments comprehensively quantified the GJIC capacity in the embryonic chick calvaria and indicated that the cell-cell communication capacity of the osteocytes in the embryonic chick calvaria was related to their development.

A Single Chance to Contact Multiple Targets: Distinct Osteocyte Morphotypes Shed Light on the Cellular Mechanism Ensuring the Robust Formation of Osteocytic Networks

The formation of the complex osteocytic network relies on the emission of long cellular processes involved in communication, mechanical strain sensing, and bone turnover control. Newly deposited osteocytic processes rapidly become trapped within the calcifying matrix, and, therefore, they must adopt their definitive conformation and contact their targets in a single morphogenetic event. However, the cellular mechanisms ensuring the robustness of this unique mode of morphogenesis remain unknown. To address this issue, we examined the developing calvaria of the amphibian Xenopus tropicalis by confocal, two-photon, and super-resolution imaging, and described flattened osteocytes lying within a woven bone structured in lamellae of randomly oriented collagen fibers. While most cells emit peripheral and perpendicular processes, we report two osteocytes morphotypes, located at different depth within the bone matrix and exhibiting distinct number and orientation of perpendicular cell processes. We show that this pattern is conserved with the chick Gallus gallus and suggest that the cellular microenvironment, and more particularly cell-cell contact, plays a fundamental role in the induction and stabilization of osteocytic processes. We propose that this intrinsic property might have been evolutionarily selected for its ability to robustly generate self-organizing osteocytic networks harbored by the wide variety of bone shapes and architectures found in extant and extinct vertebrates.

3D X-ray ultra-microscopy of bone tissue

We review the current X-ray techniques with 3D imaging capability at the nano-scale: transmission X-ray microscopy, ptychography and in-line phase nano-tomography. We further review the different ultra-structural features that have so far been resolved: the lacuno-canalicular network, collagen orientation, nano-scale mineralization and their use as basis for mechanical simulations. X-ray computed tomography at the micro-metric scale is increasingly considered as the reference technique in imaging of bone micro-structure. The trend has been to push towards increasingly higher resolution. Due to the difficulty of realizing optics in the hard X-ray regime, the magnification has mainly been due to the use of visible light optics and indirect detection of the X-rays, which limits the attainable resolution with respect to the wavelength of the visible light used in detection. Recent developments in X-ray optics and instrumentation have allowed to implement several types of methods that achieve imaging that is limited in resolution by the X-ray wavelength, thus enabling computed tomography at the nano-scale. We review here the X-ray techniques with 3D imaging capability at the nano-scale: transmission X-ray microscopy, ptychography and in-line phase nano-tomography. Further, we review the different ultra-structural features that have so far been resolved and the applications that have been reported: imaging of the lacuno-canalicular network, direct analysis of collagen orientation, analysis of mineralization on the nano-scale and use of 3D images at the nano-scale to drive mechanical simulations. Finally, we discuss the issue of going beyond qualitative description to quantification of ultra-structural features.

Osteogenic gene transcription is regulated via gap junction-mediated cell-cell communication

An analytical study of cell-cell communications between murine osteoblast-like MLO-A5 cells and bone marrow mesenchymal stem cell (BMSC)-like C3H10T1/2 cells was performed. C3H10T1/2 cells expressing green fluorescent protein (10T-GFP cells) were generated to enable the isolation of the BMSC-like cells from co-cultures with MLO-A5 cells. The mRNA expression levels of several osteogenic transcription factors (Runx2, Osterix, Dlx5, and Msx2) did not differ between the co-cultured and mono-cultured 10T-GFP cells, but those of alkaline phosphatase (ALP) and bone sialoprotein (BSP) were 300- to 400-fold higher in the co-cultured cells. Patch clamp and biocytin transfer assays revealed gap junction-mediated communication between co-cultured 10T-GFP and MLO-A5 cells. The addition of a gap junction inhibitor suppressed the increases in the expression levels of the ALP and BSP mRNAs in co-cultured 10T-GFP cells. Furthermore, the histone acetylation levels were higher in co-cultured 10T-GFP cells than in mono-cultured 10T-GFP cells. These results suggest that osteoblasts and BMSCs associate via gap junctions, and that gap junction-mediated signaling induces histone acetylation that leads to elevated transcription of the genes encoding ALP and BSP in BMSCs.

Activation of HIFa pathway in mature osteoblasts disrupts the integrity of the osteocyte/canalicular network

The hypoxia-inducible factors (HIFs), HIF-1α and HIF-2α, are the central mediators of the homeostatic response that enables cells to survive and differentiate in low-oxygen conditions. Previous studies indicated that disruption of the von Hippel-Lindau gene (Vhl) coincides with the activation of HIFα signaling. Here we show that inactivation of Vhl in mature osteoblasts/osteocytes induces their apoptosis and disrupts the cell/canalicular network. VHL-deficient (ΔVHL) mice exhibited a significantly increased cortical bone area resulting from enhanced proliferation and osteogenic differentiation of the bone marrow stromal cells (BMSCs) by inducing the expression of β-catenin in the BMSC. Our data suggest that the VHL/HIFα pathway in mature osteoblasts/osteocytes plays a critical role in the bone cell/canalicular network and that the changes of osteocyte morphology/function and cell/canalicular network may unleash the bone formation, The underlying mechanism of which was the accumulation of β-catenin in the osteoblasts/osteoprogenitors of the bone marrow.

Micro- and nano-CT for the study of bone ultrastructure

Micro-computed tomography (micro-CT)-a version of X-ray CT operating at high spatial resolution-has had a considerable success for the investigation of trabecular bone micro-architecture. Currently, there is a lot of interest in exploiting CT techniques at even higher spatial resolutions to assess bone tissue at the cellular scale. After recalling the basic principles of micro-CT, we review the different existing system, based on either standard X-ray tubes or synchrotron sources. Then, we present recent applications of micro- and nano-CT for the analysis of osteocyte lacunae and the lacunar-canalicular network. We also address the question of the quantification of bone ultrastructure to go beyond the sole visualization.

Normal variation in cortical osteocyte lacunar parameters in healthy young males

The most abundant cell in bone, osteocytes form an interconnected system upon which the regulation of healthy bone relies. Although the complete nature of the role of osteocytes has yet to be defined, they are generally accepted to play a part in the sensing of load and the initiation of damage repair. A previous study conducted by our group identified variation of up to 30% in osteocyte lacunar density and morphological parameters between regions of a single cross-section of human femoral shaft; that study, however, was limited to a single individual. The aim of the current study was to determine whether this pattern consistently occurs in healthy young male femora. Anterior, posterior, medial and lateral blocks were prepared from the proximal femoral shaft of seven males and synchrotron radiation micro-CT imaged. Average lacunar densities (± SD) from the anterior, posterior, medial and lateral regions were 23 394 ± 1705, 30 180 ± 4860, 35 946 ± 5990 and 29 678 ± 6081 lacunae per mm(3) of bone tissue, respectively. These values were significantly different between the anterior and both the medial and posterior regions (P < 0.05). The density of the combined anterior and posterior regions was also significantly lower (P = 0.006) than the density of the combined medial and lateral regions. Although no difference was found in predominant orientation, shape differences were found; with the combined anterior-posterior regions having lacunae that were significantly more elongated and less flat than the combined medial-lateral values (P < 0.001). As expected, in this larger study, there was a dramatic difference in lacunar density between the medial and anterior region (up to ~ 54%). The study clearly demonstrates that the high variation seen in osteocyte lacunar density as well as other lacunar parameters, noted in a number of biomechanical, age and pathology studies, are well within the range of normal variation; however, the reasons for and consequences of this variation remain unclear. Lacunar parameters including abundance and shape are being increasingly incorporated into computational modeling of bone biology and this paper represents a more comprehensive description of normal healthy lacunae.

Gap junctional communication in osteocytes is amplified by low intensity vibrations in vitro

The physical mechanism by which cells sense high-frequency mechanical signals of small magnitude is unknown. During exposure to vibrations, cell populations within a bone are subjected not only to acceleratory motions but also to fluid shear as a result of fluid-cell interactions. We explored displacements of the cell nucleus during exposure to vibrations with a finite element (FE) model and tested in vitro whether vibrations can affect osteocyte communication independent of fluid shear. Osteocyte like MLO-Y4 cells were subjected to vibrations at acceleration magnitudes of 0.15 g and 1 g and frequencies of 30 Hz and 100 Hz. Gap junctional intracellular communication (GJIC) in response to these four individual vibration regimes was investigated. The FE model demonstrated that vibration induced dynamic accelerations caused larger relative nuclear displacement than fluid shear. Across the four regimes, vibrations significantly increased GJIC between osteocytes by 25%. Enhanced GJIC was independent of vibration induced fluid shear; there were no differences in GJIC between the four different vibration regimes even though differences in fluid shear generated by the four regimes varied 23-fold. Vibration induced increases in GJIC were not associated with altered connexin 43 (Cx43) mRNA or protein levels, but were dependent on Akt activation. Combined, the in silico and in vitro experiments suggest that externally applied vibrations caused nuclear motions and that large differences in fluid shear did not influence nuclear motion (<1%) or GJIC, perhaps indicating that vibration induced nuclear motions may directly increase GJIC. Whether the increase in GJIC is instrumental in modulating anabolic and anti-catabolic processes associated with the application of vibrations remains to be determined.

Dynamic permeability of the lacunar-canalicular system in human cortical bone

A new method for the experimental determination of the permeability of a small sample of a fluid-saturated hierarchically structured porous material is described and applied to the determination of the lacunar-canalicular permeability [Formula: see text] in bone. The interest in the permeability of the lacunar-canalicular pore system (LCS) is due to the fact that the LCS is considered to be the site of bone mechanotransduction due to the loading-driven fluid flow over cellular structures. The permeability of this space has been estimated to be anywhere from [Formula: see text] to [Formula: see text]. However, the vascular pore system and LCS are intertwined, rendering the permeability of the much smaller-dimensioned LCS challenging to measure. In this study, we report a combined experimental and analytical approach that allowed the accurate determination of the [Formula: see text] to be on the order of [Formula: see text] for human osteonal bone. It was found that the [Formula: see text] has a linear dependence on loading frequency, decreasing at a rate of [Formula: see text]/Hz from 1 to 100 Hz, and using the proposed model, the porosity alone was able to explain 86 % of the [Formula: see text] variability.

Matrix-dependent adhesion mediates network responses to physiological stimulation of the osteocyte cell process

Osteocytes are bone cells that form cellular networks that sense mechanical loads distributed throughout the bone tissue. Interstitial fluid flow in the lacunar canalicular system produces focal strains at localized attachment sites around the osteocyte cell process. These regions of periodic attachment between the osteocyte cell membrane and its canalicular wall are sites where pN-level fluid-flow induced forces are generated in vivo. In this study, we show that focally applied forces of this magnitude using a newly developed Stokesian fluid stimulus probe initiate rapid and transient intercellular electrical signals in vitro. Our experiments demonstrate both direct gap junction coupling and extracellular purinergic P2 receptor signaling between MLO-Y4 cells in a connected bone cell network. Intercellular signaling was initiated by pN-level forces applied at integrin attachment sites along both appositional and distal unapposed cell processes, but not initiated at their cell bodies with equivalent forces. Electrical coupling was evident in 58% of all cell pairs tested with appositional connections; coupling strength increased with the increasing number of junctional connections. Apyrase, a nucleotide-degrading enzyme, suppressed and abolished force-induced effector responses, indicating a contribution from ATP released by the stimulated cell. This work extends the understanding of how osteocytes modulate their microenvironment in response to mechanical signals and highlights mechanisms of intercellular relay of mechanoresponsive signals in the bone network.

The early mouse 3D osteocyte network in the presence and absence of mechanical loading

Osteocytes are considered to act as mechanosensory cells in bone. They form a functional synctia in which their processes become interconnected to constitute a three-dimensional (3D) network. Previous studies reported that in mice, the two-dimensional osteocyte network becomes progressively more regular as they grow, although the key factors governing the arrangement of the osteocyte network during bone growth remain unknown. In this study, we characterized the 3D formation of the osteocyte network during bone growth. Morphological skeletal changes have been reported to occur in response to mechanical loading and unloading. In order to evaluate the effect of mechanical unloading on osteocyte network formation, we subjected newborn mice to sciatic neurectomy in order to immobilize their left hind limb as an unloading model. The osteocyte network was visualized by staining osteocyte cell bodies and processes with fluorescently labeled phalloidin. First, we compared the osteocyte network in the femora of embryonic and 6-week-old mice in order to understand the morphological changes that occur with normal growth and mechanical loading. In embryonic mice, the osteocyte network in the femur cortical bone displayed a random cell body distribution, non-directional orientation of cell processes, and irregularly shaped cells. In 6-week-old mice, the 3D network contained spindle-shaped osteocytes, which were arranged parallel to the longitudinal axis of the femur. In addition, more and longer cell processes radiated from each osteocyte. Second, we compared the cortical osteocyte networks of 6-week-old mice that had or had not undergone sciatic neurectomy in order to evaluate the effect of unloading on osteocyte network formation. The osteocyte network formation in both cortical bone and cancellous bone was affected by mechanical loading. However, there were differences in the extent of network formation between cortical bone and cancellous bone in response to mechanical loading with regard to the orientation, nuclear shape and branch formation.

Advances in assessment of bone porosity, permeability and interstitial fluid flow

This contribution reviews recent research performed to assess the porosity and permeability of bone tissue with the objective of understanding interstitial fluid movement. Bone tissue mechanotransduction is considered to occur due to the passage of interstitial pore fluid adjacent to dendritic cell structures in the lacunar-canalicular porosity. The movement of interstitial fluid is also necessary for the nutrition of osteocytes. This review will focus on four topics related to improved assessment of bone interstitial fluid flow. First, the advantages and limitations of imaging technologies to visualize bone porosities and architecture at several length scales are summarized. Second, recent efforts to measure the vascular porosity and lacunar-canalicular microarchitecture are discussed. Third, studies associated with the measurement and estimation of the fluid pressure and permeability in the vascular and lacunar-canalicular domains are summarized. Fourth, the development of recent models to represent the interchange of fluids between the bone porosities is described.

Variation in osteocytes morphology vs bone type in turtle shell and their exceptional preservation from the Jurassic to the present

Here we describe variations in osteocytes derived from each of the three bone layers that comprise the turtle shell. We examine osteocytes in bone from four extant turtle species to form a morphological 'baseline', and then compare these with morphologies of osteocytes preserved in Cenozoic and Mesozoic fossils. Two different morphotypes of osteocytes are recognized: flattened-oblate osteocytes (FO osteocytes), which are particularly abundant in the internal cortex and lamellae of secondary osteons in cancellous bone, and stellate osteocytes (SO osteocytes), principally present in the interstitial lamellae between secondary osteons and external cortex. We show that the morphology of osteocytes in each of the three bone layers is conserved through ontogeny. We also demonstrate that these morphological variations are phylogenetically independent, as well as independent of the bone origin (intramembranous or endochondral). Preservation of microstructures consistent with osteocytes in the morphology in Cenozoic and Mesozoic fossil turtle bones appears to be common, and occurs in diverse diagenetic environments including marine, freshwater, and terrestrial deposits. These data have potential to illuminate aspects of turtle biology and evolution previously unapproachable, such as estimates of genome size of extinct species, differences in metabolic rates among different bones from a single individual, and potential function of osteocytes as capsules for preservation of ancient biomolecules.

An analytical tool that quantifies cellular morphology changes from three-dimensional fluorescence images

The most common software analysis tools available for measuring fluorescence images are for two-dimensional (2D) data that rely on manual settings for inclusion and exclusion of data points, and computer-aided pattern recognition to support the interpretation and findings of the analysis. It has become increasingly important to be able to measure fluorescence images constructed from three-dimensional (3D) datasets in order to be able to capture the complexity of cellular dynamics and understand the basis of cellular plasticity within biological systems. Sophisticated microscopy instruments have permitted the visualization of 3D fluorescence images through the acquisition of multispectral fluorescence images and powerful analytical software that reconstructs the images from confocal stacks that then provide a 3D representation of the collected 2D images. Advanced design-based stereology methods have progressed from the approximation and assumptions of the original model-based stereology even in complex tissue sections. Despite these scientific advances in microscopy, a need remains for an automated analytic method that fully exploits the intrinsic 3D data to allow for the analysis and quantification of the complex changes in cell morphology, protein localization and receptor trafficking. Current techniques available to quantify fluorescence images include Meta-Morph (Molecular Devices, Sunnyvale, CA) and Image J (NIH) which provide manual analysis. Imaris (Andor Technology, Belfast, Northern Ireland) software provides the feature MeasurementPro, which allows the manual creation of measurement points that can be placed in a volume image or drawn on a series of 2D slices to create a 3D object. This method is useful for single-click point measurements to measure a line distance between two objects or to create a polygon that encloses a region of interest, but it is difficult to apply to complex cellular network structures. Filament Tracer (Andor) allows automatic detection of the 3D neuronal filament-like however, this module has been developed to measure defined structures such as neurons, which are comprised of dendrites, axons and spines (tree-like structure). This module has been ingeniously utilized to make morphological measurements to non-neuronal cells, however, the output data provide information of an extended cellular network by using a software that depends on a defined cell shape rather than being an amorphous-shaped cellular model. To overcome the issue of analyzing amorphous-shaped cells and making the software more suitable to a biological application, Imaris developed Imaris Cell. This was a scientific project with the Eidgenössische Technische Hochschule, which has been developed to calculate the relationship between cells and organelles. While the software enables the detection of biological constraints, by forcing one nucleus per cell and using cell membranes to segment cells, it cannot be utilized to analyze fluorescence data that are not continuous because ideally it builds cell surface without void spaces. To our knowledge, at present no user-modifiable automated approach that provides morphometric information from 3D fluorescence images has been developed that achieves cellular spatial information of an undefined shape (Figure 1). We have developed an analytical platform using the Imaris core software module and Imaris XT interfaced to MATLAB (Mat Works, Inc.). These tools allow the 3D measurement of cells without a pre-defined shape and with inconsistent fluorescence network components. Furthermore, this method will allow researchers who have extended expertise in biological systems, but not familiarity to computer applications, to perform quantification of morphological changes in cell dynamics.

In situ imaging of the autonomous intracellular Ca(2+) oscillations of osteoblasts and osteocytes in bone

Bone cells form a complex three-dimensional network consisting of osteoblasts and osteocytes embedded in a mineralized extracellular matrix. Ca(2+) acts as a ubiquitous secondary messenger in various physiological cellular processes and transduces numerous signals to the cell interior and between cells. However, the intracellular Ca(2+) dynamics of bone cells have not been evaluated in living bone. In the present study, we developed a novel ex-vivo live Ca(2+) imaging system that allows the dynamic intracellular Ca(2+) concentration ([Ca(2+)](i)) responses of intact chick calvaria explants to be observed without damaging the bone network. Our live imaging analysis revealed for the first time that both osteoblasts and osteocytes display repetitive and autonomic [Ca(2+)](i) oscillations ex vivo. Thapsigargin, an inhibitor of the endoplasmic reticulum that induces the emptying of intracellular Ca(2+) stores, abolished these [Ca(2+)](i) responses in both osteoblasts and osteocytes, indicating that Ca(2+) release from intracellular stores plays a key role in the [Ca(2+)](i) oscillations of these bone cells in intact bone explants. Another possible [Ca(2+)](i) transient system to be considered is gap junctional communication through which Ca(2+) and other messenger molecules move, at least in part, across cell-cell junctions; therefore, we also investigated the role of gap junctions in the maintenance of the autonomic [Ca(2+)](i) oscillations observed in the intact bone. Treatment with three distinct gap junction inhibitors, 18α-glycyrrhetinic acid, oleamide, and octanol, significantly reduced the proportion of responsive osteocytes, indicating that gap junctions are important for the maintenance of [Ca(2+)](i) oscillations in osteocytes, but less in osteoblasts. Taken together, we found that the bone cells in intact bone explants showed autonomous [Ca(2+)](i) oscillations that required the release of intracellular Ca(2+) stores. In addition, osteocytes specifically modulated these oscillations via cell-cell communication through gap junctions, which maintains the observed [Ca(2+)](i) oscillations of bone cells.

Structural differences in the osteocyte network between the calvaria and long bone revealed by three-dimensional fluorescence morphometry, possibly reflecting distinct mechano-adaptations and sensitivities

The structural features of osteocytes and their cellular process network are thought to allow for mechanotransduction from the bone tissue to these cells. This study applied three-dimensional fluorescence microscopy to fixed and decalcified bone specimens to quantitatively compare the osteocytes and their networks between mouse parietal bone and tibia that are physiologically enforced by distinct mechanical loads. The subsequent morphometric analysis by the surface rendering of osteocyte cell bodies revealed the tibia to have relatively enriched cytoplasm in the osteocyte cell body in comparison to the parietal bone. Furthermore, quantitative tracing of the cellular processes in silico demonstrated that the numbers of the cellular processes and their bifurcation points per osteocyte in the tibia were significantly higher than those in the parietal bone. Though the total length of the processes per osteocyte in the tibia was two times longer, its total surface area and total volume were smaller than those in the parietal bone, due to its thinner diameter. These architectural differences in the osteocytes and their networks are thus implicated in the adaptation to physiologically different loading, and may also induce distinct mechanosensitivities.

Gap junctions and hemichannels in signal transmission, function and development of bone

Gap junctional intercellular communication (GJIC) mediated by connexins, in particular connexin 43 (Cx43), plays important roles in regulating signal transmission among different bone cells and thereby regulates development, differentiation, modeling and remodeling of the bone. GJIC regulates osteoblast formation, differentiation, survival and apoptosis. Osteoclast formation and resorptive ability are also reported to be modulated by GJIC. Furthermore, osteocytes utilize GJIC to coordinate bone remodeling in response to anabolic factors and mechanical loading. Apart from gap junctions, connexins also form hemichannels, which are localized on the cell surface and function independently of the gap junction channels. Both these channels mediate the transfer of molecules smaller than 1.2kDa including small ions, metabolites, ATP, prostaglandin and IP(3). The biological importance of the communication mediated by connexin-forming channels in bone development is revealed by the low bone mass and osteoblast dysfunction in the Cx43-null mice and the skeletal malformations observed in occulodentodigital dysplasia (ODDD) caused by mutations in the Cx43 gene. The current review summarizes the role of gap junctions and hemichannels in regulating signaling, function and development of bone cells. This article is part of a Special Issue entitled: The Communicating junctions, composition, structure and characteristics.