Cardiac tissue engineering: implications for pediatric heart surgery

An overview of post transplantation events of decellularized scaffolds

Regenerative medicine and tissue engineering are reasonable techniques for repairing failed tissues and could be a suitable alternative to organ transplantation. One of the most widely used methods for preparing bioscaffolds is the decellularization procedure. Although cell debris and DNA are removed from the decellularized tissues, important compositions of the extracellular matrix including proteins, proteoglycans, and glycoproteins are nearly preserved. Moreover, the obtained scaffolds have a 3-dimensional (3D) structure, appropriate naïve mechanical properties, and good biocompatibility. After transplantation, different types of host cells migrate to the decellularized tissues. Histological and immunohistochemical assessment of the different bioscaffolds after implantation reveals the migration of parenchymal cells, angiogenesis, as well as the invasion of inflammatory and giant foreign cells. In this review, the events after transplantation including angiogenesis, scaffold degradation, and the presence of immune and tissue-specific progenitor cells in the decellularized scaffolds in various hosts, are discussed.

Human-derived decellularized extracellular matrix scaffold incorporating autologous bone marrow stem cells from patients with congenital heart disease for cardiac tissue engineering

BACKGROUND

Stem cells are used as an alternative treatment option for patients with congenital heart disease (CHD) due to their regenerative potential, but they are subject to low retention rate in the injured myocardium. Also, the diseased microenvironment in the injured myocardium may not provide healthy cues for optimal stem cell function.

OBJECTIVE

In this study, we prepared a novel human-derived cardiac scaffold to improve the functional behaviors of stem cells.

METHODS

Decellularized extracellular matrix (ECM) scaffolds were fabricated by removing cells of human-derived cardiac appendage tissues. Then, bone marrow c-kit+ progenitor cells from patients with congenital heart disease were seeded on the cardiac ECM scaffolds. Cell adhesion, survival, proliferation and cardiac differentiation on human cardiac decellularized ECM scaffold were evaluated in vitro. Label-free mass spectrometry was applied to analyze cardiac ECM proteins regulating cell behaviors.

RESULTS

It was shown that cardiac ECM scaffolds promoted stem cell adhesion and proliferation. Importantly, bone marrow c-kit+ progenitor cells cultured on cardiac ECM scaffold for 14 days differentiated into cardiomyocyte-like cells without supplement with any inducible factors, as confirmed by the increased protein level of Gata4 and upregulated gene levels of Gata4, Nkx2.5, and cTnT. Proteomic analysis showed the proteins in cardiac ECM functioned in multiple biological activities, including regulation of cell proliferation, regulation of cell differentiation, and cardiovascular system development.

CONCLUSION

The human-derived cardiac scaffold constructed in this study may help repair the damaged myocardium and hold great potential for tissue engineering application in pediatric patients with CHD.

Applications of 3D Bioprinting Technology in Induced Pluripotent Stem Cells-Based Tissue Engineering

Induced pluripotent stem cells (iPSCs) are essentially produced by the genetic reprogramming of adult cells. Moreover, iPSC technology prevents the genetic manipulation of embryos. Hence, with the ensured element of safety, they rarely cause ethical concerns when utilized in tissue engineering. Several cumulative outcomes have demonstrated the functional superiority and potency of iPSCs in advanced regenerative medicine. Recently, an emerging trend in 3D bioprinting technology has been a more comprehensive approach to iPSC-based tissue engineering. The principal aim of this review is to provide an understanding of the applications of 3D bioprinting in iPSC-based tissue engineering. This review discusses the generation of iPSCs based on their distinct purpose, divided into two categories: (1) undifferentiated iPSCs applied with 3D bioprinting; (2) differentiated iPSCs applied with 3D bioprinting. Their significant potential is analyzed. Lastly, various applications for engineering tissues and organs have been introduced and discussed in detail.

Construction and Evaluation of a Bio-Engineered Pump to Enable Subpulmonary Support of the Fontan Circulation: A Proof-of-Concept Study

Our objective was to create a bio-engineered pump (BEP) for subpulmonary Fontan circulation support capable of luminal endothelialization and producing a 2-6 mmHg pressure gradient across the device without flow obstruction. To accomplish this, porcine urinary bladder submucosa was decellularized to produce a urinary bladder matrix (UBM) which produced acellular sheets of UBM. The UBM was cultured with human umbilical vein endothelial cells producing a nearly confluent monolayer of cells with the maintenance of typical histologic features demonstrating UBM to be a suitable substrate for endothelial cells. A lamination process created bilayer UBM sheets which were formed into biologic reservoirs. BEPs were constructed by securing the biologic reservoir between inlet and outlet valves and compressed with a polyurethane balloon. BEP function was evaluated in a simple flow loop representative of a modified subpulmonary Fontan circulation. A BEP with a 92-mL biologic reservoir operating at 60 cycles per minute produced pulsatile downstream flows without flow obstruction and generated a favorable pressure gradient across the device, maintaining upstream pressure of 6 mm Hg and producing downstream pressure of 13 mm Hg. The BEP represents potential long-term assistance for the Fontan circulation to relieve venous hypertension, provide pulsatile pulmonary blood flow and maintain cardiac preload.

Regenerative Engineering: Current Applications and Future Perspectives

Many pathologies, congenital defects, and traumatic injuries are untreatable by conventional pharmacologic or surgical interventions. Regenerative engineering represents an ever-growing interdisciplinary field aimed at creating biological replacements for injured tissues and dysfunctional organs. The need for bioengineered replacement parts is ubiquitous among all surgical disciplines. However, to date, clinical translation has been limited to thin, small, and/or acellular structures. Development of thicker tissues continues to be limited by vascularization and other impediments. Nevertheless, currently available materials, methods, and technologies serve as robust platforms for more complex tissue fabrication in the future. This review article highlights the current methodologies, clinical achievements, tenacious barriers, and future perspectives of regenerative engineering.

Does Maintenance of Pulmonary Blood Flow Pulsatility at the Time of the Fontan Operation Improve Hemodynamic Outcome in Functionally Univentricular Hearts?

It is unclear whether residual anterograde pulmonary blood flow (APBF) at the time of Fontan is beneficial. Pulsatile pulmonary flow may be important in maintaining a compliant and healthy vascular circuit. We, therefore, wished to ascertain whether there was hemodynamic evidence that residual pulsatile flow at time of Fontan promotes clinical benefit. 106 consecutive children with Fontan completion (1999-2018) were included. Pulmonary artery pulsatility index (PI, (systolic pressure-diastolic pressure)/mean pressure)) was calculated from preoperative cardiac catheterization. Spectral analysis charted PI as a continuum against clinical outcome. The population was subsequently divided into three pulsatility subgroups to facilitate further comparison. Median PI prior to Fontan was 0.236 (range 0-1). 39 had APBF, in whom PI was significantly greater (median: 0.364 vs. 0.177, Mann-Whitney p < 0.0001). There were four early hospital deaths (3.77%), and PI in these patients ranged from 0.214 to 0.423. There was no correlation between PI and standard cardiac surgical outcomes or systemic oxygen saturation at discharge. Median follow-up time was 4.33 years (range 0.0273-19.6), with no late deaths. Increased pulsatility was associated with higher oxygen saturations in the long term, but there was no difference in reported exercise tolerance (Ross), ventricular function, or atrioventricular valve regurgitation at follow-up. PI in those with Fontan-associated complications or the requiring pulmonary vasodilators aligned with the overall population median. Maintenance of pulmonary flow pulsatility did not alter short-term outcomes or long-term prognosis following Fontan although it tended to increase postoperative oxygen saturations, which may be beneficial in later life.

Biofabrication in Congenital Cardiac Surgery: A Plea from the Operating Theatre, Promise from Science

Despite significant advances in numerous fields of biofabrication, clinical application of biomaterials combined with bioactive molecules and/or cells largely remains a promise in an individualized patient settings. Three-dimensional (3D) printing and bioprinting evolved as promising techniques used for tissue-engineering, so that several kinds of tissue can now be printed in layers or as defined structures for replacement and/or reconstruction in regenerative medicine and surgery. Besides technological, practical, ethical and legal challenges to solve, there is also a gap between the research labs and the patients' bedside. Congenital and pediatric cardiac surgery mostly deal with reconstructive patient-scenarios when defects are closed, various segments of the heart are connected, valves are implanted. Currently available biomaterials lack the potential of growth and conduits, valves derange over time surrendering patients to reoperations. Availability of viable, growing biomaterials could cancel reoperations that could entail significant public health benefit and improved quality-of-life. Congenital cardiac surgery is uniquely suited for closing the gap in translational research, rapid application of new techniques, and collaboration between interdisciplinary teams. This article provides a succinct review of the state-of-the art clinical practice and biofabrication strategies used in congenital and pediatric cardiac surgery, and highlights the need and avenues for translational research and collaboration.

Induced pluripotent stem cells as a platform to understand patient-specific responses to opioids and anaesthetics

Recent advances in human induced pluripotent stem cell (iPSC) technology may provide unprecedented opportunities to study patient-specific responses to anaesthetics and opioids. In this review, we will (1) examine the advantages and limitations of iPSC technology, (2) summarize studies using iPSCs that have contributed to our current understanding of anaesthetics and opioid action on the cardiovascular system and central nervous system (CNS), and (3) describe how iPSC technology can be used to further develop personalized analgesic and sedative pharmacotherapies with reduced or minimal detrimental cardiovascular effects.

Applications of 3D Bioprinted-Induced Pluripotent Stem Cells in Healthcare

Induced pluripotent stem cell (iPSC) technology and advancements in three-dimensional (3D) bioprinting technology enable scientists to reprogram somatic cells to iPSCs and 3D print iPSC-derived organ constructs with native tissue architecture and function. iPSCs and iPSC-derived cells suspended in hydrogels (bioinks) allow to print tissues and organs for downstream medical applications. The bioprinted human tissues and organs are extremely valuable in regenerative medicine as bioprinting of autologous iPSC-derived organs eliminates the risk of immune rejection with organ transplants. Disease modeling and drug screening in bioprinted human tissues will give more precise information on disease mechanisms, drug efficacy, and drug toxicity than experimenting on animal models. Bioprinted iPSC-derived cancer tissues will aid in the study of early cancer development and precision oncology to discover patient-specific drugs. In this review, we present a brief summary of the combined use of two powerful technologies, iPSC technology, and 3D bioprinting in health-care applications.

Regenerative Therapy for Patients with Congenital Heart Disease

Congenital heart disease (CHD) is the most common birth defect, affecting 1 in 100 babies. Among CHDs, single ventricle (SV) physiologies, such as hypoplastic left heart syndrome and tricuspid atresia, are particularly severe conditions that require multiple palliative surgeries, including the Fontan procedure. Although the management strategies for SV patients have markedly improved, the prevalence of ventricular dysfunction continues to increase over time, especially after the Fontan procedure. At present, the final treatment for SV patients who develop heart failure is heart transplantation; however, transplantation is difficult to achieve because of severe donor shortages. Recently, various regenerative therapies for heart failure have been developed that increase cardiomyocytes and restore cardiac function, with promising results in adults. The clinical application of various forms of regenerative medicine for CHD patients with heart failure is highly anticipated, and the latest research in this field is reviewed here. In addition, regenerative therapy is important for children with CHD because of their natural growth. The ideal pediatric cardiovascular device would have the potential to adapt to a child's growth. Therefore, if a device that increases in size in accordance with the patient's growth could be developed using regenerative medicine, it would be highly beneficial. This review provides an overview of the available regenerative technologies for CHD patients.

Modeling human diseases with induced pluripotent stem cells: from 2D to 3D and beyond

The advent of human induced pluripotent stem cells (iPSCs) presents unprecedented opportunities to model human diseases. Differentiated cells derived from iPSCs in two-dimensional (2D) monolayers have proven to be a relatively simple tool for exploring disease pathogenesis and underlying mechanisms. In this Spotlight article, we discuss the progress and limitations of the current 2D iPSC disease-modeling platform, as well as recent advancements in the development of human iPSC models that mimic in vivo tissues and organs at the three-dimensional (3D) level. Recent bioengineering approaches have begun to combine different 3D organoid types into a single '4D multi-organ system'. We summarize the advantages of this approach and speculate on the future role of 4D multi-organ systems in human disease modeling.

Vascularisation for cardiac tissue engineering: the extracellular matrix

Cardiovascular diseases present a major socio-economic burden. One major problem underlying most cardiovascular and congenital heart diseases is the irreversible loss of contractile heart muscle cells, the cardiomyocytes. To reverse damage incurred by myocardial infarction or by surgical correction of cardiac malformations, the loss of cardiac tissue with a thickness of a few millimetres needs to be compensated. A promising approach to this issue is cardiac tissue engineering. In this review we focus on the problem of in vitro vascularisation as implantation of cardiac patches consisting of more than three layers of cardiomyocytes (> 100 μm thick) already results in necrosis. We explain the need for vascularisation and elaborate on the importance to include non-myocytes in order to generate functional vascularised cardiac tissue. We discuss the potential of extracellular matrix molecules in promoting vascularisation and introduce nephronectin as an example of a new promising candidate. Finally, we discuss current biomaterial- based approaches including micropatterning, electrospinning, 3D micro-manufacturing technology and porogens. Collectively, the current literature supports the notion that cardiac tissue engineering is a realistic option for future treatment of paediatric and adult patients with cardiac disease.

Towards a Tissue-Engineered Contractile Fontan-Conduit: The Fate of Cardiac Myocytes in the Subpulmonary Circulation

The long-term outcome of patients with single ventricles improved over time, but remains poor compared to other congenital heart lesions with biventricular circulation. Main cause for this unfavourable outcome is the unphysiological hemodynamic of the Fontan circulation, such as subnormal systemic cardiac output and increased systemic-venous pressure. To overcome this limitation, we are developing the concept of a contractile extracardiac Fontan-tunnel. In this study, we evaluated the survival and structural development of a tissue-engineered conduit under in vivo conditions. Engineered heart tissue was generated from ventricular heart cells of neonatal Wistar rats, fibrinogen and thrombin. Engineered heart tissues started beating around day 8 in vitro and remained contractile in vivo throughout the experiment. After culture for 14 days constructs were implanted around the right superior vena cava of Wistar rats (n = 12). Animals were euthanized after 7, 14, 28 and 56 days postoperatively. Hematoxylin and eosin staining showed cardiomyocytes arranged in thick bundles within the engineered heart tissue-conduit. Immunostaining of sarcomeric actin, alpha-actin and connexin 43 revealed a well -developed cardiac myocyte structure. Magnetic resonance imaging (d14, n = 3) revealed no constriction or stenosis of the superior vena cava by the constructs. Engineered heart tissues survive and contract for extended periods after implantation around the superior vena cava of rats. Generation of larger constructs is warranted to evaluate functional benefits of a contractile Fontan-conduit.

Regenerative Medicine Strategies for Hypoplastic Left Heart Syndrome

Hypoplastic left heart syndrome (HLHS), the most severe and common form of single ventricle congenital heart lesions, is characterized by hypoplasia of the mitral valve, left ventricle (LV), and all LV outflow structures. While advances in surgical technique and medical management have allowed survival into adulthood, HLHS patients have severe morbidities, decreased quality of life, and a shortened lifespan. The single right ventricle (RV) is especially prone to early failure because of its vulnerability to chronic pressure overload, a mode of failure distinct from ischemic cardiomyopathy encountered in acquired heart disease. As these patients enter early adulthood, an emerging epidemic of RV failure has become evident. Regenerative medicine strategies may help preserve or boost RV function in children and adults with HLHS by promoting angiogenesis and mitigating oxidative stress. Rescuing a RV in decompensated failure may also require the creation of new, functional myocardium. Although considerable hurdles remain before their clinical translation, stem cell therapy and cardiac tissue engineering possess revolutionary potential in the treatment of pediatric and adult patients with HLHS who currently have very limited long-term treatment options.

PNIPAAm-based biohybrid injectable hydrogel for cardiac tissue engineering

Injectable biomaterials offer a non-invasive approach to deliver cells into the myocardial infarct region to maintain a high level of cell retention and viability and initiate the regeneration process. However, previously developed injectable matrices often suffer from low bioactivity or poor mechanical properties. To address this need, we introduced a biohybrid temperature-responsive poly(N-isopropylacrylamide) PNIPAAm-Gelatin-based injectable hydrogel with excellent bioactivity as well as mechanical robustness for cardiac tissue engineering. A unique feature of our work was that we performed extensive in vitro biological analyses to assess the functionalities of cardiomyocytes (CMs) alone and in co-culture with cardiac fibroblasts (CFs) (2:1 ratio) within the hydrogel matrix. The synthesized hydrogel exhibited viscoelastic behavior (storage modulus: 1260 Pa) and necessary water content (75%) to properly accommodate the cardiac cells. The encapsulated cells demonstrated a high level of cell survival (90% for co-culture condition, day 7) and spreading throughout the hydrogel matrix in both culture conditions. A dense network of stained F-actin fibers (∼ 6 × 10(4) μm(2) area coverage, co-culture condition) illustrated the formation of an intact and three dimensional (3D) cell-embedded matrix. Furthermore, immunostaining and gene expression analyses revealed mature phenotypic characteristics of cardiac cells. Notably, the co-culture group exhibited superior structural organization and cell-cell coupling, as well as beating behavior (average ∼ 45 beats per min, co-culture condition, day 7). The outcome of this study is envisioned to open a new avenue for extensive in vitro characterization of injectable matrices embedded with 3D mono- and co-culture of cardiac cells prior to in vivo experiments.

STATEMENT OF SIGNIFICANCE

In this work, we synthesized a new class of biohybrid temperature-responsive poly(N-isopropylacrylamide) PNIPAAm-Gelatin-based injectable hydrogel with suitable bioactivity and mechanical properties for cardiac tissue engineering. A significant aspect of our work was that we performed extensive in vitro biological analyses to assess the functionality of cardiomyocytes alone and in co-culture with cardiac fibroblasts encapsulated within the 3D hydrogel matrix.

Partially Digested Adult Cardiac Extracellular Matrix Promotes Cardiomyocyte Proliferation In Vitro

Stimulating or maintaining the proliferative capacity of postnatal mammalian cardiomyocytes is a major challenge to cardiac regeneration. Previously, it is found that fetal cardiac extracellular matrix (ECM) can promote neonatal rat cardiomyocyte proliferation in vitro better than neonatal or adult ECM. It is hypothesized that partial digestion of adult ECM (PD-ECM) would liberate less crosslinked components that promote cardiomyocyte proliferation, similar to fetal ECM. Neonatal rat cardiac cells are seeded onto substrates coated with adult rat cardiac ECM that has been solubilized in pepsin-HCl for 1, 3, 6, 12, 24, or 48 h. Cardiomyocyte proliferation and fold-change in numbers from 1 to 5 d are highest on 1 and 3 h PD-ECM compared to other conditions. Sarcomeres tend to mature on 24 and 48 h PD-ECM where low proliferation is observed. 3 h PD-ECM is primarily composed of Fibrillin-1, Fibrinogen, and Laminins while 48 h PD-ECM is dominated by Collagen I. Our results suggest that adult ECM retains regenerative cues that may be masked by more abundant, mature ECM components. PD-ECM provides a simple yet powerful approach to promoting cardiomyocyte proliferation.

Adipose-derived stem cell sheet transplantation therapy in a porcine model of chronic heart failure

Adipose-derived stem cells (ASCs) are a promising resource for cell transplantation therapy for damaged heart tissue. Cell death in the graft early after transplantation represents the main cause of unsatisfactory therapeutic efficacy, but tissue-engineered cell sheets grown in temperature-responsive cell culture dishes may enable improved engraftment of transplanted cells. We investigated the therapeutic potential of this method in chronic myocardial ischemia in swine. We created a porcine model of chronic heart failure by implanting an ameroid constrictor around the main trunk of the left anterior descending artery, just distal to the circumflex branch. Simultaneously, ASCs were obtained from a piece of subcutaneous adipose tissue and expanded to form ASC sheets using temperature-responsive dishes. Four weeks after ameroid constrictor placement, triple-layered ASC sheets were transplanted onto the area of the ischemic myocardium (sheet group, n = 7). Controls (n = 7) received no sheet. Just before and 4 weeks after transplantation, left ventriculography (LVG) and coronary angiography (CAG) were performed. LVG revealed a significant improvement in the left ventricular ejection fraction of the sheet group compared with controls (47.6 ± 2.9% vs 41.4 ± 2.8%, P < 0.05). Furthermore, development of collateral vessels was only detected in the sheet group with right CAG. Histologic analysis demonstrated that engrafted ASC sheets grew to form a thickened layer that included newly formed vessels. ASC sheet transplantation therapy is an intriguing therapeutic method for ischemic heart failure.

Regenerative implants for cardiovascular tissue engineering

A fundamental problem that affects the field of cardiovascular surgery is the paucity of autologous tissue available for surgical reconstructive procedures. Although the best results are obtained when an individual's own tissues are used for surgical repair, this is often not possible as a result of pathology of autologous tissues or lack of a compatible replacement source from the body. The use of prosthetics is a popular solution to overcome shortage of autologous tissue, but implantation of these devices comes with an array of additional problems and complications related to biocompatibility. Transplantation offers another option that is widely used but complicated by problems related to rejection and donor organ scarcity. The field of tissue engineering represents a promising new option for replacement surgical procedures. Throughout the years, intensive interdisciplinary, translational research into cardiovascular regenerative implants has been undertaken in an effort to improve surgical outcome and better quality of life for patients with cardiovascular defects. Vascular, valvular, and heart tissue repair are the focus of these efforts. Implants for these neotissues can be divided into 2 groups: biologic and synthetic. These materials are used to facilitate the delivery of cells or drugs to diseased, damaged, or absent tissue. Furthermore, they can function as a tissue-forming device used to enhance the body's own repair mechanisms. Various preclinical studies and clinical trials using these advances have shown that tissue-engineered materials are a viable option for surgical repair, but require refinement if they are going to reach their clinical potential. With the growth and accomplishments this field has already achieved, meeting those goals in the future should be attainable.

Cell therapy, 3D culture systems and tissue engineering for cardiac regeneration

Ischemic Heart Disease (IHD) still represents the "Number One Killer" worldwide accounting for the death of numerous patients. However the capacity for self-regeneration of the adult heart is very limited and the loss of cardiomyocytes in the infarcted heart leads to continuous adverse cardiac-remodeling which often leads to heart-failure (HF). The concept of regenerative medicine comprising cell-based therapies, bio-engineering technologies and hybrid solutions has been proposed as a promising next-generation approach to address IHD and HF. Numerous strategies are under investigation evaluating the potential of regenerative medicine on the failing myocardium including classical cell-therapy concepts, three-dimensional culture techniques and tissue-engineering approaches. While most of these regenerative strategies have shown great potential in experimental studies, the translation into a clinical setting has either been limited or too rapid leaving many key questions unanswered. This review summarizes the current state-of-the-art, important challenges and future research directions as to regenerative approaches addressing IHD and resulting HF.

Young developmental age cardiac extracellular matrix promotes the expansion of neonatal cardiomyocytes in vitro

A major limitation to cardiac tissue engineering and regenerative medicine strategies is the lack of proliferation of postnatal cardiomyocytes. The extracellular matrix (ECM) is altered during heart development, and studies suggest that it plays an important role in regulating myocyte proliferation. Here, the effects of fetal, neonatal and adult cardiac ECM on the expansion of neonatal rat ventricular cells in vitro are studied. At 24h, overall cell attachment was lowest on fetal ECM; however, ~80% of the cells were cardiomyocytes, while many non-myocytes attached to older ECM and poly-l-lysine controls. After 5 days, the cardiomyocyte population remained highest on fetal ECM, with a 4-fold increase in number. Significantly more cardiomyocytes stained positively for the mitotic marker phospho-histone H3 on fetal ECM compared with other substrates at 5 days, suggesting that proliferation may be a major mechanism of cardiomyocyte expansion on young ECM. Further study of the beneficial properties of early developmental aged cardiac ECM could advance the design of novel biomaterials aimed at promoting cardiac regeneration.

Regeneration of chronic myocardial infarction by injectable hydrogels containing stem cell homing factor SDF-1 and angiogenic peptide Ac-SDKP

Regeneration of chronic myocardial infarction (CMI) is one of the challenging issues due to its limited regeneration activity compared to acute or sub-acute stage. In this study, we examined whether combination of stem cell homing factor (SDF-1) and angiogenic peptides (Ac-SDKP) injected with biomimetic hydrogels promote regeneration of cardiac function in a CMI model. We evaluated the regeneration of chronically infarcted myocardium using injectable biomimetic hydrogels containing two therapeutic factors; stromal-derived factor-1 (SDF-1) and Ac-SDKP for stem cell homing and angiogenesis, respectively. Injection of the two therapeutic factors into the infarct region of the left ventricle showed that the biomimetic hydrogels containing two therapeutic factor exhibited significantly improved left ventricle function, increased angiogenesis, decreased infarct size and greatest wall thickness within the infarct region at 4 weeks post-treatment. From these results, it is clear that hydrogels containing two therapeutic factors showed synergistic effects on regeneration in the chronic heart failure model. In conclusion, these results suggest that combination of stem cell homing factor with angiogenic peptides recruit stem cells to the microenvironments, increase the expression of angiogenic genes, enhance the matured vessel formation and improve the cardiac function in chronic MI.

Stem cells in pediatric cardiology

The ability to reprogram virtually any cell of human origin to behave like embryonic or pluripotent stem cells is a major breakthrough in stem cell biology. Human induced pluripotent stem cells (iPSC) provide a unique opportunity to study "disease in a dish" within a defined genetic and environmental background. Patient-derived iPSCs have been successfully used to model cardiomyopathies, rhythm disorders and vascular disorders. They also provide an exciting opportunity for drug discovery and drug repurposing for disorders with a known molecular basis including childhood onset heart disease, particularly cardiac genetic disorders. The review will discuss their use in drug discovery, efficacy and toxicity studies with emphasis on challenges in pediatric-focused drug discovery. Issues that will need to be addressed in the coming years include development of maturation protocols for iPSC-derived cardiac lineages, use of iPSCs to study not just cardiac but extra-cardiac phenotypes in the same patient, scaling up of stem cell platforms for high-throughput drug screens, translating drug testing results to clinical applications in the paradigm of personalized medicine, and improving both the efficiency and the safety of iPSC-derived lineages for future stem cell therapies.

Preservation of left ventricular function and morphology in volume-loaded versus volume-unloaded heterotopic heart transplants

Total mechanical unloading of the heart in classical models of heterotopic heart transplantation leads to cardiac atrophy and functional deterioration. In contrast, partial unloading of failing human hearts with left ventricular (LV) assist devices (LVADs) can in some patients ameliorate heart failure symptoms. Here we tested in heterotopic rat heart transplant models whether partial volume-loading (VL; anastomoses: aorta of donor to aorta of recipient, pulmonary artery of donor to left atrium of donor, superior vena cava of donor to inferior vena cava of recipient; n = 27) is superior to the classical model of myocardial unloading (UL; anastomoses: aorta of donor to aorta of recipient, pulmonary artery of donor to inferior vena cava of recipient; n = 14) with respect to preservation of ventricular morphology and function. Echocardiography, magnetic resonance imaging, and LV-pressure-volume catheter revealed attenuated myocardial atrophy with ~30% higher LV weight and better systolic contractile function in VL compared with UL (fractional area shortening, 34% vs. 18%; maximal change in pressure over time, 2,986 ± 252 vs. 2,032 ± 193 mmHg/s). Interestingly, no differences in fibrosis (Picrosirus red staining) or glucose metabolism (2-[18F]-fluoro-2-deoxy-D-glucose-PET) between VL and UL were observed. We conclude that the rat model of partial VL attenuates atrophic remodelling and shows superior morphological as well as functional preservation, and thus should be considered more widely as a research model.

Stem cells in pediatric cardiology

The ability to reprogram virtually any cell of human origin to behave like embryonic or pluripotent stem cells is a major breakthrough in stem cell biology. Human induced pluripotent stem cells (iPSC) provide a unique opportunity to study "disease in a dish" within a defined genetic and environmental background. Patient-derived iPSCs have been successfully used to model cardiomyopathies, rhythm disorders and vascular disorders. They also provide an exciting opportunity for drug discovery and drug repurposing for disorders with a known molecular basis including childhood onset heart disease, particularly cardiac genetic disorders. The review will discuss their use in drug discovery, efficacy and toxicity studies with emphasis on challenges in pediatric-focused drug discovery. Issues that will need to be addressed in the coming years include development of maturation protocols for iPSC-derived cardiac lineages, use of iPSCs to study not just cardiac but extra-cardiac phenotypes in the same patient, scaling up of stem cell platforms for high-throughput drug screens, translating drug testing results to clinical applications in the paradigm of personalized medicine, and improving both the efficiency and the safety of iPSC-derived lineages for future stem cell therapies.

'Shovel-Ready' applications of stem cell advances for pediatric heart disease

PURPOSE OF REVIEW

The past decade has seen remarkable advances in the field of stem cell biology. Many new technologies and applications are passing the translational phase and likely will soon be relevant for the clinical pediatric cardiologist.

RECENT FINDINGS

This review will focus on two advances in basic science that are now translating into clinical trials. The first advance is the recognition, characterization, and recent therapeutic application of resident cardiac progenitor cells (CPCs). Early results of adult trials and scattered case reports in pediatric patients support expanding CPC-based trials for end-stage heart failure in pediatric patients. The relative abundance of CPCs in the neonate and young child offers greater potential benefits in heart failure treatment than has been realized to date. The second advance is the technology of induced pluripotent stem cells (iPSCs), which reprograms differentiated somatic cells to an undifferentiated embryonic-like state. When iPSCs are differentiated into cardiomyocytes, they model a patient's specific disease, test pharmaceuticals, and potentially provide an autologous source for cell-based therapy.

SUMMARY

The therapeutic recruitment and/or replacement of CPCs has potential for enhancing cardiac repair and regeneration in children with heart failure. Use of iPSCs to model heart disease holds great potential to gain new insights into diagnosis, pathophysiology, and disease-specific management for genetic-based cardiovascular diseases that are prevalent in pediatric patients.

Cardiac tissue development for delivery of embryonic stem cell-derived endothelial and cardiac cells in natural matrices

The packaging and delivery of cells for cardiac regeneration has been explored using a variety biomaterials and delivery methods, but these studies often ignore one or more important design factors critical for rebuilding cardiac tissue. These include the biomaterial architecture, strength and stiffness, cell alignment, and/or incorporation of multiple cell types. In this article, we explore the combinatorial use of decellularized tissues, moldable hydrogels, patterned cell-seeding, and cell-sheet engineering and find that a combination of these methods is optimal in the recreation of transplantable cardiac-like tissue in vivo. We show that decellularized urinary bladder matrix (UBM), that is compliant and suturable, supports the survival of cell cultures but does not allow maintenance of cell-to-cell contacts of transferred cell-sheets (presumably, due to its rough surface). Moreover, the UBM material must be filled with hyaluronan (HA) hydrogels for smoothing rough surfaces and allowing the delivery of greater cell numbers. We additionally incorporated our previously developed "wrinkled" microchip for inducing alignment of cardiac cells with a laser-etched mask for co-seeding patterned "channels" of cells. This article also introduces a novel method of plasma coating for cell-sheet engineering that compares well with electron bean irradiation methods and may be combined with our "wrinkled" surfaces to facilitate the alignment of cardiac cells into sheets. Our data shows that an optimal design for generating cardiac tissue would include (1) decellularized matrix seeded with endothelial cells in a HA layered with (2) prealigned cardiac cell-sheets fabricated using our "wrinkled" microchips and thermo-responsive polymer [poly(N-isopropylacrylamide)] cell sheet transfer system.

Electrical stimulation directs engineered cardiac tissue to an age-matched native phenotype

Quantifying structural features of native myocardium in engineered tissue is essential for creating functional tissue that can serve as a surrogate for in vitro testing or the eventual replacement of diseased or injured myocardium. We applied three-dimensional confocal imaging and image analysis to quantitatively describe the features of native and engineered cardiac tissue. Quantitative analysis methods were developed and applied to test the hypothesis that environmental cues direct engineered tissue toward a phenotype resembling that of age-matched native myocardium. The analytical approach was applied to engineered cardiac tissue with and without the application of electrical stimulation as well as to age-matched and adult native tissue. Individual myocytes were segmented from confocal image stacks and assigned a coordinate system from which measures of cell geometry and connexin-43 spatial distribution were calculated. The data were collected from 9 nonstimulated and 12 electrically stimulated engineered tissue constructs and 5 postnatal day 12 and 7 adult hearts. The myocyte volume fraction was nearly double in stimulated engineered tissue compared to nonstimulated engineered tissue (0.34 ± 0.14 vs 0.18 ± 0.06) but less than half of the native postnatal day 12 (0.90 ± 0.06) and adult (0.91 ± 0.04) myocardium. The myocytes under electrical stimulation were more elongated compared to nonstimulated myocytes and exhibited similar lengths, widths, and heights as in age-matched myocardium. Furthermore, the percentage of connexin-43-positive membrane staining was similar in the electrically stimulated, postnatal day 12, and adult myocytes, whereas it was significantly lower in the nonstimulated myocytes. Connexin-43 was found to be primarily located at cell ends for adult myocytes and irregularly but densely clustered over the membranes of nonstimulated, stimulated, and postnatal day 12 myocytes. These findings support our hypothesis and reveal that the application of environmental cues produces tissue with structural features more representative of age-matched native myocardium than adult myocardium. We suggest that the presented approach can be applied to quantitatively characterize developmental processes and mechanisms in engineered tissue.

Cell therapies for heart function recovery: focus on myocardial tissue engineering and nanotechnologies

Cell therapies have gained increasing interest and developed in several approaches related to the treatment of damaged myocardium. The results of multiple clinical trials have already been reported, almost exclusively involving the direct injection of stem cells. It has, however, been postulated that the efficiency of injected cells could possibly be hindered by the mechanical trauma due to the injection and their low survival in the hostile environment. It has indeed been demonstrated that cell mortality due to the injection approaches 90%. Major issues still need to be resolved and bed-to-bench followup is paramount to foster clinical implementations. The tissue engineering approach thus constitutes an attractive alternative since it provides the opportunity to deliver a large number of cells that are already organized in an extracellular matrix. Recent laboratory reports confirmed the interest of this approach and already encouraged a few groups to investigate it in clinical studies. We discuss current knowledge regarding engineered tissue for myocardial repair or replacement and in particular the recent implementation of nanotechnological approaches.

Controlled release of thymosin β4 using collagen-chitosan composite hydrogels promotes epicardial cell migration and angiogenesis

Rapid vascularization at the infarcted site is crucial for cardiac repair following myocardial infarction. Thymosin β4 (Tβ4), a 43-amino acid peptide, is both angiogenic and cardioprotective. Tβ4 in soluble form was previously shown to promote cell migration from quiescent adult cardiac explants. Here we developed a collagen-chitosan hydrogel for the encapsulation of Tβ4, which allowed its controlled release over 28days to elicit localized and prolonged effects. Contrastingly, Tβ4 was fully released over 3days when encapsulated in collagen-only hydrogels due to charge repulsion and lack of interconnected pores as shown by SEM. The charge of encapsulated molecules affected their release from collagen-chitosan hydrogels. While the release of neutral polyalanine was size-controlled diffusion, that of negatively-charged Tβ4 and positively-charged polylysine was affected by electrostatic interactions of peptides with collagen/chitosan molecules. Hydrogels with encapsulated Tβ4 significantly increased cell migration and outgrowth of CD31-positive capillaries from mouse and rat epicardial explants in vitro, compared to Tβ4-free and soluble controls. Potential advantage of Tβ4 over commonly-used angiogenic growth factors is that it can induce recruitment and differentiation of both endothelial and smooth muscle cells necessary for vascular stability. Importantly, Tβ4-encapsulated collagen-chitosan hydrogels promoted angiogenesis in vivo upon subcutaneous injection, compared to collagen-only hydrogels.

Engineered channels enhance cellular density in perfused scaffolds

Scaffold-based tissue engineering provides cells with an engineered matrix to enhance and direct cell attachment, proliferation and differentiation. One critical limitation to current tissue engineering approaches is the inability to create densely populated constructs thicker than a few 100 μm. We hypothesized that development of porous, channeled scaffolds would increase cell density and uniformity of their spatial distribution through scaffold channel perfusion. Patterned polyurethane sheets were fabricated using a sprayed phase separation technique and laminated together to form 1.5 mm thick channeled scaffolds. Hydraulic permeability testing confirmed the presence of functional channels throughout the multilaminate construct. A continuous flow bioreactor was used to perfuse the construct with medium during the culture period. Cross-sectional cell densities and spatial uniformities were measured in channeled and nonchanneled scaffolds under different seeding and culture conditions. Channeled scaffolds were found to have higher densities of human mesenchymal stem cells than nonchanneled samples. Perfused scaffolds had more uniform spatial distribution of cells within the scaffold compared to statically cultured scaffolds. In conclusion, we have shown the channeled scaffolds to be a promising approach toward creating thick tissue-engineered constructs.

Collagen scaffolds with or without the addition of RGD peptides support cardiomyogenesis after aggregation of mouse embryonic stem cells

Embryonic stem (ES) cell-based cardiac muscle repair using tissue-engineered scaffolds is an attractive prospective treatment option for patients suffering from heart disease. In this study, our aim was to characterize mouse ES cell-derived cardiomyocytes growing on collagen I/III scaffolds, modified with the adhesion peptides arginine-glycine-aspartic acid (RGD). Mouse ES-derived embryoid bodies (EBs) differentiated efficiently into beating cardiomyocytes on the collagen scaffolds. QPCR analysis and immunofluorescent staining showed that cardiomyocytes expressed cardiac muscle-related transcripts and proteins. Analysis of cardiomyocytes by electron microscopy identified muscle fiber bundles and Z bands, typical of ES-derived cardiomyocytes. No differences were detected between the collagen + RGD and collagen control scaffolds. ES cells that were not differentiated as EBs prior to seeding on the scaffold, did not differentiate into cardiomyocytes. These results indicate that a collagen I/III scaffold supports cardiac muscle development and function after EB formation, and that this scaffold appears suitable for future in vivo testing. The addition of the RGD domain to the collagen scaffold did not improve cardiomyocyte development or viability, indicating that RGD signaling to integrins was not a rate-limiting event for cardiomyogenesis from EBs seeded on a collagen scaffold.

Engineered approaches to the stem cell microenvironment for cardiac tissue regeneration

Micro- and nanoscale engineering approaches in medicine have the potential to recreate physiologically relevant stem cell microenvironments to enhance our understanding of stem cell behaviour and bring stem cell therapy closer to fruition. The realization of such advancements will impact a number of therapeutic applications, the most immediate of which may be the repair of heart tissue. Despite profound advances in creating physiologically relevant in vivo stem cell niches through the control of biochemical regulatory factors, further synergism of innovative techniques promise to elucidate the impact of a number of physical cues such as stem cell differentiation into cardiac cells, the electromechanical coupling among these cells, and the formation of bioengineered cardiac tissue grafts. This review examines the recent physiologically relevant micro- and nanoengineering efforts that have been made to address these factors. In Sections II and III, we introduce the traditional focuses of stem cell derived cardiac tissue: differentiation directed by transcription factors and structural cues within the stem cell niche. However, the majority of this review, Sections IV-VII, endeavours to highlight innovative and unconventional microscale engineering techniques that have employed topographic, biomaterial, microfluidic, mechanical, electrical, and optical stimulation for stem cell based cardiac tissue engineering.

A 3D aligned microfibrous myocardial tissue construct cultured under transient perfusion

The goal of this study was to design and develop a myocardial patch to use in the repair of myocardial infarctions or to slow down tissue damage and improve long-term heart function. The basic 3D construct design involved two biodegradable macroporous tubes, to allow transport of growth media to the cells within the construct, and cell seeded, aligned fiber mats wrapped around them. The microfibrous mat housed mesenchymal stem cells (MSCs) from human umbilical cord matrix (Wharton's Jelly) aligned in parallel to each other in a similar way to cell organization in native myocardium. Aligned micron-sized fiber mats were obtained by electrospinning a polyester blend (PHBV (5% HV), P(L-D,L)LA (70:30) and poly(glycerol sebacate) (PGS)). The micron-sized electrospun parallel fibers were effective in Wharton's Jelly (WJ) MSCs alignment and the cells were able to retract the mat. The 3D construct was cultured in a microbioreactor by perfusing the growth media transiently through the macroporous tubing for two weeks and examined by fluorescence microscopy for cell distribution and preservation of alignment. The fluorescence images of thin sections of 3D constructs from static and perfused cultures confirmed enhanced cell viability, uniform cell distribution and alignment due to nutrient provision from inside the 3D structure.

Engineered human cardiac tissue

The human heart is the first organ to develop during embryogenesis and is arguably the most essential organ for life. However, after birth, the heart has very little capacity to repair malformations such as congenital heart defects or to regenerate after an injury such as myocardial infarction. Cardiac tissue engineering addresses the need for a therapeutic biologic implant to restore cardiac structure and muscle mass. This review highlights current research in cardiac tissue engineering that uses human cardiomyocytes derived from embryonic stem cells. Other human cell sources are discussed because future human therapies will benefit from novel techniques using human-induced pluripotent stem cells and cardiomyocytes derived from direct reprogramming of somatic cells. Furthermore, this review examines the main approaches to creating engineered cardiac tissue with synthetic scaffolds, natural scaffolds, or no exogenous scaffold (i.e., "scaffold free"). The choice of scaffold and cells ultimately depends on the goals of the therapy, so the review considers how congenital heart defects define the design parameters for cardiac tissue engineering needed for surgical repair in pediatric cardiac patients.

General overview of the Seventh International Symposium on Stem Cell Therapy and Cardiovascular Innovations

The Seventh International Symposium on Stem Cell Therapy and Cardiovascular Innovations was held in Madrid on the 6th and 7th of May 2010. Gathering for the seventh consecutive year the most relevant researchers and opinion leaders on cardiovascular cell therapy, it has become the most important worldwide event on this field. A comprehensive review of the last developments on cell therapy, surgery for heart failure and tissue engineering was made, and the results of three clinical trials were reported. The Symposium was dedicated to the memory of Professor Helmut Drexler.

Strategies in cardiac tissue engineering

In heart failure, post-myocardial infarction and some congenital cardiac anomalies, organ transplantation is the only effective cure. Shortage of organ donors and complications of orthotopic heart transplant remain major challenges to the modern field of transplantation. Tissue engineering using cell-based strategies presents itself as a new way of generating functional myocardium. Engineering functional myocardium de novo requires an abundant source of cells that can form cardiomyocytes. These cells may be used with biocompatible scaffold materials to generate a contractile myocardium. Lastly, to sustain the high metabolism of the construct, a functional vasculature needs to be developed with the forming cardiac tissue. This review provides an update on the progress of stem cell research in the context of cardiac tissue development, types of biomaterials used in cardiac tissue engineering (CTE) and currently employed strategies for vascularization in CTE. In addition, a brief overview of strategies utilized in CTE is provided.

Design of a 3D aligned myocardial tissue construct from biodegradable polyesters

The heart does not regenerate new functional tissue when myocardium dies following coronary artery occlusion, or if it is defective. Ventricular restoration involves excising the infarct and replacing it with a cardiac patch to restore the heart to a more healthy condition. The goal of this study was to design and develop a clinically applicable myocardial patch to replace myocardial infarcts and improve long-term heart function. A basic design composed of 3D microfibrous mats that house mesenchymal stem cells (MSCs) was developed from human umbilical cord matrix (Wharton's Jelly) cells aligned in parallel to each other mimicking the native myocardium. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), poly(L-D,L-lactic acid) (P(L-D,L)LA) and poly(glycerol sebacate) (PGS) were blended and electrospun into aligned fiber mats with fiber diameter ranging between 1.10 and 1.25 microm. The micron-sized parallel fibers of the polymer blend were effective in cell alignment and cells have penetrated deep within the mat through the fiber interstices, occupying the whole structure; 8-9 cell layers were obtained. Biodegradable macroporous tubings were introduced to serve as nutrient delivery route. It was possible to create a thick myocardial patch with structure similar to the native tissue and with a capability to grow.

Injectable cardiac tissue engineering for the treatment of myocardial infarction

Heart disease is a leading cause of morbidity and mortality worldwide. Myocardial infarction leads to permanent loss of cardiac tissue and ultimately heart failure. However, current therapies could only stall the progression of the disease. Thus, new therapies are needed to regenerate damaged hearts to overcome poor prognosis of patients with heart failure. The shortage of heart donors is also a factor for innovating new therapies. Although the cardiac performance by cell-based therapy has improved, unsatisfactory cell retention and transplant survival still plague this technique. Because biomaterials can improve the cell retention, survival and differentiation, cardiac tissue engineering is now being explored as an approach to support cell-based therapies and enhance their efficacy for cardiac disease. In the last decade, cardiac tissue engineering has made considerable progress. Among different kinds of approaches in the cardiac tissue engineering, the approach of injectable cardiac tissue engineering is more minimally invasive than that of in vitro engineered tissue or epicardial patch implantation. It is therefore clinically appealing. In this review, we strive to describe the major progress in the flied of injectable cardiac tissue engineering, including seeding cell sources, biomaterials and novel findings in preclinical studies and clinical applications. The remaining problems will also be discussed.