Cloning, purification and characterization of two components of phenol hydroxylase from Rhodococcus erythropolis UPV-1

Aerobic phenol degradation using native bacterial consortium via ortho-and meta-cleavage pathways

Effective bioremediation of a phenol-polluted environment harnesses microorganisms' ability to utilize hazardous compounds as beneficial degraders. In the present study, a consortium consisting of 15 bacterial strains was utilized. The current study aims to monitor the phenol biodegradation pathway. The tested consortium showed effective potential in the bioremediation of phenol-contaminated industrial wastewater. The enzymatic studies conducted brought to light that the bacterial consortium under test was proficient in degrading phenol under aerobic conditions while exhibiting the simultaneous expression of both ortho- and meta-cleavage pathways. It was observed that pheA, pheB, and C12O genes were maximally expressed, and the enzymes responsible for phenol degradation, namely, phenol hydroxylase, catechol 1,2-dioxygenase, and catechol 2,3-dioxygenase, reached maximum activity after 48 h of incubation with a 20-ppm phenol concentration. To gain a deeper understanding of the activation of both ortho- and meta-cleavage pathways involved in phenol degradation, a technique known as differential display reverse transcriptase polymerase chain reaction (DDRT-PCR) was applied. This method allowed for the specific amplification and detection of genes responsible for phenol degradation. The expression levels of these genes determined the extent to which both ortho- and meta-cleavage pathways were activated in response to the presence of phenol.

Functional and structural characterization of a thermostable flavin reductase from Geobacillus mahadii Geo-05

Flavin reductases play a vital role in catalyzing the reduction of flavin through NADH or NADPH oxidation. The gene encoding flavin reductase from the thermophilic bacterium Geobacillus mahadii Geo-05 (GMHpaC) was cloned, overexpressed in Escherichia coli BL21 (DE3) pLysS, and purified to homogeneity. The purified recombinant GMHpaC (Class II) contains chromogenic cofactors, evidenced by maximal absorbance peaks at 370 nm and 460 nm. GMHpaC stands out as the most thermostable and pH-tolerant flavin reductase reported to date, retaining up to 95 % catalytic activity after incubation at 70 °C for 30 min and maintaining over 80 % activity within a pH range of 2-12 for 30 min. Furthermore, GMHpaC's catalytic activity increases by 52 % with FMN as a co-factor compared to FAD and riboflavin. GMHpaC, coupled with 4-hydroxyphenylacetate-3-monooxygenase (GMHpaB) from G. mahadii Geo-05, enhances the hydroxylation of 4-hydroxyphenylacetate (HPA) by 85 %. The modeled structure of GMHpaC reveals relatively conserved flavin and NADH binding sites. Modeling and docking studies shed light on structural features and amino acid substitutions that determine GMHpaC's co-factor specificity. The remarkable thermostability, high catalytic activity, and general stability exhibited by GMHpaC position it as a promising enzyme candidate for various industrial applications.

Successful selective production of vanillic acid from depolymerized sulfite lignin and its application to poly(ethylene vanillate) synthesis

Towards lignin upgrading, vanillic acid (VA), a lignin-derived guaiacyl compound, was produced from sulfite lignin for successfully synthesizing poly(ethylene vanillate), an aromatic polymer. The engineered Sphingobium sp. SYK-6-based strain in which the genes responsible for VA/3-O-methyl gallic acid O-demethylase and syringic acid O-demethylase were disrupted was able to produce vanillic acid (VA) from the mixture consisting of acetovanillone, vanillin, VA, and other low-molecular-weight aromatics obtained by Cu(OH)₂-catalyzed alkaline depolymerization of sulfite lignin and membrane fractionation. From the bio-based VA, methyl-4-(2-hydroxyethoxy)-3-methoxybenzoate was synthesized via methylesterification, hydroxyethylation, and distillation, and then it was subjected to polymerization catalyzed by titanium tetraisopropoxide. The molecular weight of the obtained poly(ethylene vanillate) was evaluated to be M_w = 13,000 (M_w/M_n = 1.99) and its melting point was 261°C. The present work proved that poly(ethylene vanillate) is able to be synthesized using VA produced from lignin for the first time.

Isolation and characterization of Indigenous Bacilli strains from an oil refinery wastewater with potential applications for phenol/cresol bioremediation

Phenolic compounds are frequently occurring in wastewaters from various industrial processes at high concentrations, imposing prominent risk to aquatic biosphere and human health. Bioremediation has been proven to be an effective approach to remove these compounds, and hunting for functional organisms is still of primary importance to develop efficient processes. In this study, we report several newly isolated bacillus strains with superior performances in metabolizing phenols, one of which showed paramount efficiencies to metabolize phenol at concentrations up to 1200 mg L^-1 and could simultaneously degrade a wide range of other phenolic compounds. The genes encoding for phenol hydroxylase (PH) and catechol-2,3-dioxygenase (C23O) have been detected and characterized, evidencing that phenol degradation occurs via the meta pathway. The GC level of the PH gene was found to be much higher than that of genes from other Bacilli but was quite close to that of the genes from Rhodococcus, and the induction of both enzymes by phenols was confirmed by RT-PCR experiments. We intend to believe this novel strain might be promising to serve as preferred organisms for developing more robust and efficient bioremediation processes of degrading phenolic compounds due to its validated performance.

Analysis of Phenol Biodegradation in Antibiotic and Heavy Metal Resistant Acinetobacter lwoffii NL1

Phenol is a common environmental contaminant. The purpose of this study was to isolate phenol-degrading microorganisms from wastewater in the sections of the Chinese Medicine Manufactory. The phenol-degrading Acinetobacter lwoffii NL1 was identified based on a combination of biochemical characteristics and 16S rRNA genes. To analyze the molecular mechanism, the whole genome of A. lwoffii NL1 was sequenced, yielding 3499 genes on one circular chromosome and three plasmids. Enzyme activity analysis showed that A. lwoffii NL1 degraded phenol via the ortho-cleavage rather than the meta-cleavage pathway. Key genes encoding phenol hydroxylase and catechol 1,2-dioxygenase were located on a megaplasmid (pNL1) and were found to be separated by mobile genetic elements; their function was validated by heterologous expression in Escherichia coli and quantitative real-time PCR. A. lwoffii NL1 could degrade 0.5 g/L phenol within 12 h and tolerate a maximum of 1.1 g/L phenol, and showed resistance against multiple antibiotics and heavy metal ions. Overall, this study shows that A. lwoffii NL1 can be potentially used for efficient phenol degradation in heavy metal wastewater treatment.

Statistical Optimisation of Phenol Degradation and Pathway Identification through Whole Genome Sequencing of the Cold-Adapted Antarctic Bacterium, Rhodococcus sp. Strain AQ5-07

Study of the potential of Antarctic microorganisms for use in bioremediation is of increasing interest due to their adaptations to harsh environmental conditions and their metabolic potential in removing a wide variety of organic pollutants at low temperature. In this study, the psychrotolerant bacterium Rhodococcus sp. strain AQ5-07, originally isolated from soil from King George Island (South Shetland Islands, maritime Antarctic), was found to be capable of utilizing phenol as sole carbon and energy source. The bacterium achieved 92.91% degradation of 0.5 g/L phenol under conditions predicted by response surface methodology (RSM) within 84 h at 14.8 °C, pH 7.05, and 0.41 g/L ammonium sulphate. The assembled draft genome sequence (6.75 Mbp) of strain AQ5-07 was obtained through whole genome sequencing (WGS) using the Illumina Hiseq platform. The genome analysis identified a complete gene cluster containing catA, catB, catC, catR, pheR, pheA2, and pheA1. The genome harbours the complete enzyme systems required for phenol and catechol degradation while suggesting phenol degradation occurs via the β-ketoadipate pathway. Enzymatic assay using cell-free crude extract revealed catechol 1,2-dioxygenase activity while no catechol 2,3-dioxygenase activity was detected, supporting this suggestion. The genomic sequence data provide information on gene candidates responsible for phenol and catechol degradation by indigenous Antarctic bacteria and contribute to knowledge of microbial aromatic metabolism and genetic biodiversity in Antarctica.

Engineered bacterial biofloc formation enhancing phenol removal and cell tolerance

A microbial floc consisting of a community of microbes embedded in extracellular polymeric substances matrix can provide microbial resistances to toxic chemicals and harsh environments. Phenol is a toxic environmental pollutant and a typical lignin-derived phenolic inhibitor. In this study, we genetically engineered Escherichia coli cells by expressions of diguanylate cyclases (DGCs) to promote proteinaceous and aliphatic biofloc formation. Compared with the planktonic E. coli cells, the biofloc-forming cells improved phenol removal rate by up to 2.2-folds, due to their substantially improved tolerance (up to 149%) to phenol and slightly enhanced cellular activity (20%) of phenol hydroxylase (PheH). The engineered bioflocs also improved E. coli tolerance to other toxic compounds such as furfural, 5-hydroxymethylfurfural, and guaiacol. Additionally, the strategy of the engineered biofloc formation was applicable to Pseudomonas putida and enhanced its tolerance to phenol. This study highlights a strategy to form engineered bioflocs for improved cell tolerance and removal of toxic compounds, enabling their universality of use in bioproduction and bioremediation.

Catabolism of Alkylphenols in Rhodococcus via a Meta-Cleavage Pathway Associated With Genomic Islands

The bacterial catabolism of aromatic compounds has considerable promise to convert lignin depolymerization products to commercial chemicals. Alkylphenols are a key class of depolymerization products whose catabolism is not well-elucidated. We isolated Rhodococcus rhodochrous EP4 on 4-ethylphenol and applied genomic and transcriptomic approaches to elucidate alkylphenol catabolism in EP4 and Rhodococcus jostii RHA1. RNA-Seq and RT-qPCR revealed a pathway encoded by the aphABCDEFGHIQRS genes that degrades 4-ethylphenol via the meta-cleavage of 4-ethylcatechol. This process was initiated by a two-component alkylphenol hydroxylase, encoded by the aphAB genes, which were upregulated ~3,000-fold. Purified AphAB from EP4 had highest specific activity for 4-ethylphenol and 4-propylphenol (~2,000 U/mg) but did not detectably transform phenol. Nevertheless, a ΔaphA mutant in RHA1 grew on 4-ethylphenol by compensatory upregulation of phenol hydroxylase genes (pheA1-3). Deletion of aphC, encoding an extradiol dioxygenase, prevented growth on 4-alkylphenols but not phenol. Disruption of pcaL in the β-ketoadipate pathway prevented growth on phenol but not 4-alkylphenols. Thus, 4-alkylphenols are catabolized exclusively via meta-cleavage in rhodococci while phenol is subject to ortho-cleavage. A putative genomic island encoding aph genes was identified in EP4 and several other rhodococci. Overall, this study identifies a 4-alkylphenol pathway in rhodococci, demonstrates key enzymes involved, and presents evidence that the pathway is encoded in a genomic island. These advances are of particular importance for wide-ranging industrial applications of rhodococci, including upgrading of lignocellulose biomass.

Construction of an Escherichia coli strain to degrade phenol completely with two modified metabolic modules

Phenol is a common water pollutant because of its broad industrial applications. Biological method is a promising alternative to conventional physical and chemical methods for removing this toxic pollutant from the environment. In this study, two metabolic modules were introduced into Escherichia coli, the widely used host for various genetic manipulations, to elucidate the metabolic capacity of E. coli for phenol degradation. The first module catalysed the conversion of phenol to catechol, whereas the second module cleaved catechol into the three carboxylic acid circulating intermediates by the ortho-cleavage pathway. Phenol was completely degraded and imported into the tricarboxylic acid cycle by the engineered bacteria. Proteomics analysis showed that all genes in the phenol degradation pathway were over-expressed and affected cell division and energy metabolism of the host cells. Phenol in coking wastewater was degraded powerfully by BL-phe/cat. The engineered E. coli can improve the removal rate and shorten the processing time for phenol removal and has considerable potential in the treatment of toxic and harmful pollutants.

Advanced Rhodococcus Biocatalysts for Environmental Biotechnologies

The review is devoted to biocatalysts based on actinobacteria of the genus Rhodococcus, which are promising for environmental biotechnologies. In the review, biotechnological advantages of Rhodococcus bacteria are evaluated, approaches used to develop robust and efficient biocatalysts are discussed, and their relevant applications are given. We focus on Rhodococcus cell immobilization in detail (methods of immobilization, criteria for strains and carriers, and optimization of process parameters) as the most efficient approach for stabilizing biocatalysts. It is shown that advanced Rhodococcus biocatalysts with improved working characteristics, enhanced stress tolerance, high catalytic activities, human and environment friendly, and commercially viable are developed, which are suitable for wastewater treatment, bioremediation, and biofuel production.

Whole Cell Actinobacteria as Biocatalysts

Production of fuels, therapeutic drugs, chemicals, and biomaterials using sustainable biological processes have received renewed attention due to increasing environmental concerns. Despite having high industrial output, most of the current chemical processes are associated with environmentally undesirable by-products which escalate the cost of downstream processing. Compared to chemical processes, whole cell biocatalysts offer several advantages including high selectivity, catalytic efficiency, milder operational conditions and low impact on the environment, making this approach the current choice for synthesis and manufacturing of different industrial products. In this review, we present the application of whole cell actinobacteria for the synthesis of biologically active compounds, biofuel production and conversion of harmful compounds to less toxic by-products. Actinobacteria alone are responsible for the production of nearly half of the documented biologically active metabolites and many enzymes; with the involvement of various species of whole cell actinobacteria such as Rhodococcus, Streptomyces, Nocardia and Corynebacterium for the production of useful industrial commodities.

Carboxylation of Hydroxyaromatic Compounds with HCO3− by Enzyme Catalysis: Recent Advances Open the Perspective for Valorization of Lignin-Derived Aromatics

This review focuses on recent advances in the field of enzymatic carboxylation reactions of hydroxyaromatic compounds using HCO3− (as a CO2 source) to produce hydroxybenzoic and other phenolic acids in mild conditions with high selectivity and moderate to excellent yield. Nature offers an extensive portfolio of enzymes catalysing reversible decarboxylation of hydroxyaromatic acids, whose equilibrium can be pushed towards the side of the carboxylated products. Extensive structural and mutagenesis studies have allowed recent advances in the understanding of the reaction mechanism of decarboxylase enzymes, ultimately enabling an improved yield and expansion of the scope of the reaction. The topic is of particular relevance today as the scope of the carboxylation reactions can be extended to include lignin-related compounds in view of developing lignin biorefinery technology.

Two dcm Gene Clusters Essential for the Degradation of Diclofop-methyl in a Microbial Consortium of Rhodococcus sp. JT-3 and Brevundimonas sp. JT-9

The metabolism of widely used aryloxyphenoxypropionate herbicides has been extensively studied in microbes. However, the information on the degradation of diclofop-methyl (DCM) is limited, with no genetic and biochemical investigation reported. The consortium L1 of Rhodococcus sp. JT-3 and Brevundimonas sp. JT-9 was able to degrade DCM through a synergistic metabolism. To elaborate the molecular mechanism of DCM degradation, the metabolic pathway for DCM was first investigated. DCM was initially transformed by strain JT-3 to diclofop acid and then by strain JT-9 to 2-(4-hydroxyphenoxy) propionic acid as well as 2,4-dichlorophenol. Subsequently, the two dcm gene clusters, dcmAE and dcmB1B2CD, involved in further degradation of 2,4-dichlorophenol, were successfully cloned from strain JT-3, and the functions of each gene product were identified. DcmA, a glutathione-dependent dehalogenase, was responsible for catalyzing the reductive dehalogenation of 2,4-dichlorophenol to 4-chlorophenol, which was then converted by the two-component monooxygenase DcmB1B2 to 4-chlorocatechol as the ring cleavage substrate of the dioxygenase DcmC. In this study, the overall DCM degradation pathway of the consortium L1 was proposed and, particularly, the lower part on the DCP degradation was characterized at the genetic and biochemical levels.

Two-Component FAD-Dependent Monooxygenases: Current Knowledge and Biotechnological Opportunities

Flavoprotein monooxygenases create valuable compounds that are of high interest for the chemical, pharmaceutical, and agrochemical industries, among others. Monooxygenases that use flavin as cofactor are either single- or two-component systems. Here we summarize the current knowledge about two-component flavin adenine dinucleotide (FAD)-dependent monooxygenases and describe their biotechnological relevance. Two-component FAD-dependent monooxygenases catalyze hydroxylation, epoxidation, and halogenation reactions and are physiologically involved in amino acid metabolism, mineralization of aromatic compounds, and biosynthesis of secondary metabolites. The monooxygenase component of these enzymes is strictly dependent on reduced FAD, which is supplied by the reductase component. More and more representatives of two-component FAD-dependent monooxygenases have been discovered and characterized in recent years, which has resulted in the identification of novel physiological roles, functional properties, and a variety of biocatalytic opportunities.

Multisubstrate specific flavin containing monooxygenase from Chlorella pyrenoidosa with potential application for phenolic wastewater remediation and biosensor application

Microbial degradation of phenolic pollutants in industrial wastewater is dependent on enzymatic pathway comprising a cascade of phenol metabolizing enzymes. Phenol hydroxylase is the first enzyme of the pathway catalysing the initial attack on phenol in green algae Chlorella pyrenoidosa. The present work reports cost-effective production of partially purified microalgal phenol hydroylase by single-step purification and characterization of its kinetic properties with the view of application for enzyme-based remediation of phenolic wastewater or in phenolic biosensor. The enzyme with a molecular weight of 25 kDa shows all characteristics of phenol hydroxylases, that is, hydroxylation of phenol to catechol (confirmed by HPLC), substrate-dependent NADPH oxidation, absorption spectrum typical of flavoproteins and peptide mass fingerprint corresponding to flavoprotein hydroxylase. The enzyme utilizes phenol with apparent Michealis constant (K_m) of 1.71 µM, maximal velocity (V_max) of 0.4 µM/min with optimal activity at pH 7 and 35°C. Fe²⁺chelators (Phenanthroline and sodium arsenate), heavy metals, denaturants and oxidizing agents showed inhibitory effect on phenol hydroxylation activity of the enzyme. The enzyme has broad substrate specificity against isomeric diphenols, isomeric methylphenols, halogen-substituted phenols, amino-substituted phenols, nitrophenols, hydroxybenzaldehyde and hydroxylbenzoic acid. The enzyme shows remarkable storage stability at room temperature and at 4°C. The multisubstrate specificity coupled to remarkable storage stability of the microalgal phenol hydroxylase opens up avenues for its application in remediation of a wide range of phenolics released in industrial wastewater or phenolic biosensor application.

Diversity shift in bacterial phenol hydroxylases driven by alkyl-phenols in oil refinery wastewaters

Phenol hydroxylases (PHs) play a primary role in the bacterial degradation of phenol and alkylphenols. They are divided into two main classes, single-component and multi-component PHs, having distinctive catalytic subunits designated as PheA1 and LmPH, respectively. The diversity of these enzymes is still largely unexplored. Here, both LmPH and pheA1 gene sequences were examined in activated sludge from oil refinery wastewaters. Phenol, p-cresol, or 3,4-dimethylphenol (3,4-DMP) supplied as extra carbon sources were rapidly mineralized by the microbial community. Analysis of LmPH genes revealed a wide range of sequences, most of which exhibited moderate similarity with homologs found in Proteobacteria. Moreover, the LmPH diversity profiles showed a dramatic shift upon sludge treatment with p-cresol or 3,4-DMP amendment. This resulted in an enrichment in sequences similar to LmPHs from Betaproteobacteria and Gammaproteobacteria. RT-PCR analysis of RNA extracted from wastewater sludge highlighted LmPH genes best expressed in situ. A PCR approach was implemented to analyze the pheA1 gene diversity in the same microbial community. Retrieved sequences fell into four clusters and appeared to be distantly related to pheA1 genes from Actinobacteria. Altogether, our results provide evidence that phenol degraders carrying LmPH are more diverse than PheA1 carrying bacteria and suggest that PHs with best adapted substrate specificity are recruited in response to (methyl)phenol availability.

Molecular characterization of a eukaryotic-like phenol hydroxylase from Corynebacterium glutamicum

This study focuses on the genetic and biochemical characterization of phenol hydroxylase (Phe, NCgl2588) from Corynebacterium glutamicum that shares 31% identity in amino acids with phenol hydroxylase from yeast Trichosporon cutaneum but less similarity with that from bacteria. The phe deletion mutant significantly reduced its ability to grow with phenol as the sole carbon and energy source. Expression of the phe gene was strongly induced with phenol and also subject to the control of carbon catabolite repression (CCR). The molecular weight of purified Phe protein determined by gel filtration chromatography was 70 kDa, indicating that Phe exists as a monomer in the purification condition. However, Phe protein pre-incubated with phenol showed a molecular weight of 140 kDa, suggesting that Phe is likely active as a dimer. In addition to phenol, the Phe protein could utilize various other phenolic compounds as substrates. Site-directed mutagenesis revealed that D75, P261, R262, R269, C349 and C476 are key amino acid residues closely related to the enzyme activity of Phe.

Comparative transcriptomics elucidates adaptive phenol tolerance and utilization in lipid-accumulating Rhodococcus opacus PD630

Lignin-derived (e.g. phenolic) compounds can compromise the bioconversion of lignocellulosic biomass to fuels and chemicals due to their toxicity and recalcitrance. The lipid-accumulating bacterium Rhodococcus opacus PD630 has recently emerged as a promising microbial host for lignocellulose conversion to value-added products due to its natural ability to tolerate and utilize phenolics. To gain a better understanding of its phenolic tolerance and utilization mechanisms, we adaptively evolved R. opacus over 40 passages using phenol as its sole carbon source (up to 373% growth improvement over wild-type), and extensively characterized two strains from passages 33 and 40. The two adapted strains showed higher phenol consumption rates (∼20 mg/l/h) and ∼2-fold higher lipid production from phenol than the wild-type strain. Whole-genome sequencing and comparative transcriptomics identified highly-upregulated degradation pathways and putative transporters for phenol in both adapted strains, highlighting the important linkage between mechanisms of regulated phenol uptake, utilization, and evolved tolerance. Our study shows that the R. opacus mutants are likely to use their transporters to import phenol rather than export them, suggesting a new aromatic tolerance mechanism. The identified tolerance genes and pathways are promising candidates for future metabolic engineering in R. opacus for improved lignin conversion to lipid-based products.

Genome sequencing reveals mechanisms for heavy metal resistance and polycyclic aromatic hydrocarbon degradation in Delftia lacustris strain LZ-C

Strain LZ-C, isolated from a petrochemical wastewater discharge site, was found to be resistant to heavy metals and to degrade various aromatic compounds, including naphenol, naphthalene, 2-methylnaphthalene and toluene. Data obtained from 16S rRNA gene sequencing showed that this strain was closely related to Delftia lacustris. The 5,889,360 bp genome of strain LZ-C was assembled into 239 contigs and 197 scaffolds containing 5855 predicted open reading frames (ORFs). Among these predicted ORFs, 464 were different from the type strain of Delftia. The minimal inhibitory concentrations were 4 mM, 30 µM, 2 mM and 1 mM for Cr(VI), Hg(II), Cd(II) and Pb(II), respectively. Both genome sequencing and quantitative real-time PCR data revealed that genes related to Chr, Czc and Mer family genes play important roles in heavy metal resistance in strain LZ-C. In addition, the Na(+)/H(+) antiporter NhaA is important for adaptation to high salinity resistance (2.5 M NaCl). The complete pathways of benzene and benzoate degradation were identified through KEGG analysis. Interestingly, strain LZ-C also degrades naphthalene but lacks the key naphthalene degradation gene NahA. Thus, we propose that strain LZ-C exhibits a novel protein with a function similar to NahA. This study is the first to reveal the mechanisms of heavy metal resistance and salinity tolerance in D. lacustris and to identify a potential 2-methylnaphthalene degradation protein in this strain. Through whole-genome sequencing analysis, strain LZ-C might be a good candidate for the bioremediation of heavy metals and polycyclic aromatic hydrocarbons.

Catabolism of Phenol and Its Derivatives in Bacteria: Genes, Their Regulation, and Use in the Biodegradation of Toxic Pollutants

Phenol and its derivatives (alkylphenols, halogenated phenols, nitrophenols) are natural or man-made aromatic compounds that are ubiquitous in nature and in human-polluted environments. Many of these substances are toxic and/or suspected of mutagenic, carcinogenic, and teratogenic effects. Bioremediation of the polluted soil and water using various bacteria has proved to be a promising option for the removal of these compounds. In this review, we describe a number of peripheral pathways of aerobic and anaerobic catabolism of various natural and xenobiotic phenolic compounds, which funnel these substances into a smaller number of central catabolic pathways. Finally, the metabolites are used as carbon and energy sources in the citric acid cycle. We provide here the characteristics of the enzymes that convert the phenolic compounds and their catabolites, show their genes, and describe regulatory features. The genes, which encode these enzymes, are organized on chromosomes and plasmids of the natural bacterial degraders in various patterns. The accumulated data on similarities and the differences of the genes, their varied organization, and particularly, an astonishingly broad range of intricate regulatory mechanism may be read as an exciting adventurous book on divergent evolutionary processes and horizontal gene transfer events inscribed in the bacterial genomes. In the end, the use of this wealth of bacterial biodegradation potential and the manipulation of its genetic basis for purposes of bioremediation is exemplified. It is envisioned that the integrated high-throughput techniques and genome-level approaches will enable us to manipulate systems rather than separated genes, which will give birth to systems biotechnology.

The taming of oxygen: biocatalytic oxyfunctionalisations

The scope and limitations of oxygenases as catalysts for preparative organic synthesis is discussed.

Functional characterization of a vanillin dehydrogenase in Corynebacterium glutamicum

Vanillin dehydrogenase (VDH) is a crucial enzyme involved in the degradation of lignin-derived aromatic compounds. Herein, the VDH from Corynebacterium glutamicum was characterized. The relative molecular mass (Mr) determined by SDS-PAGE was ~51 kDa, whereas the apparent native Mr values revealed by gel filtration chromatography were 49.5, 92.3, 159.0 and 199.2 kDa, indicating the presence of dimeric, trimeric and tetrameric forms. Moreover, the enzyme showed its highest level of activity toward vanillin at pH 7.0 and 30°C, and interestingly, it could utilize NAD(+) and NADP(+) as coenzymes with similar efficiency and showed no obvious difference toward NAD(+) and NADP(+). In addition to vanillin, this enzyme exhibited catalytic activity toward a broad range of substrates, including p-hydroxybenzaldehyde, 3,4-dihydroxybenzaldehyde, o-phthaldialdehyde, cinnamaldehyde, syringaldehyde and benzaldehyde. Conserved catalytic residues or putative cofactor interactive sites were identified based on sequence alignment and comparison with previous studies, and the function of selected residues were verified by site-directed mutagenesis analysis. Finally, the vdh deletion mutant partially lost its ability to grow on vanillin, indicating the presence of alternative VDH(s) in Corynebacterium glutamicum. Taken together, this study contributes to understanding the VDH diversity from bacteria and the aromatic metabolism pathways in C. glutamicum.

Gene redundancy of two-component (chloro)phenol hydroxylases in Rhodococcus opacus 1CP

Among other factors, a distinct gene redundancy is discussed to facilitate high metabolic versatility of rhodococci. Rhodococcus opacus 1CP is a typical member in that respect and degrades a multitude of (chlorinated) aromatic compounds. In contrast to the central pathways of aromatic degradation in strain 1CP, little is known about the degree of gene redundancy and to what extent this is reflected on protein level within the steps of peripheral degradation. By means of degenerated primers deduced from tryptic peptides of a purified phenol hydroxylase component and using the amplified fragment as a labelled probe against genomic 1CP-DNA, three gene sets encoding three different two-component phenol hydroxylases pheA1/pheA2(1-3) could be identified. One of them was found to be located on the megaplasmid p1CP, which confirms the role of these elements for metabolic versatility. Protein chromatography of phenol- and 4-chlorophenol-grown 1CP-biomass gave first evidences on a functional expression of these oxygenases, which could be initially characterised in respect of their substrate specificity.

A mechanistic study on SMOB-ADP1: an NADH:flavin oxidoreductase of the two-component styrene monooxygenase of Acinetobacter baylyi ADP1

Two styrene monooxygenase types, StyA/StyB and StyA1/StyA2B, have been described each consisting of an epoxidase and a reductase. A gene fusion which led to the chimeric reductase StyA2B and the occurrence in different phyla are major differences. Identification of SMOA/SMOB-ADP1 of Acinetobacter baylyi ADP1 may enlighten the gene fusion event since phylogenetic analysis indicated both proteins to be more related to StyA2B than to StyA/StyB. SMOB-ADP1 is classified like StyB and StyA2B as HpaC-like reductase. Substrate affinity and turnover number of the homo-dimer SMOB-ADP1 were determined for NADH (24 µM, 64 s(-1)) and FAD (4.4 µM, 56 s(-1)). SMOB-ADP1 catalysis follows a random sequential mechanism, and FAD fluorescence is quenched upon binding to SMOB-ADP1 (K d = 1.8 µM), which clearly distinguishes that reductase from StyB of Pseudomonas. In summary, this study confirmes made assumptions and provides phylogenetic and biochemical data for the differentiation of styrene monooxygenase-related flavin reductases.

Individual or synchronous biodegradation of di-n-butyl phthalate and phenol by Rhodococcus ruber strain DP-2

The bacterial strain DP-2, identified as Rhodococcus ruber, is able to effectively degrade di-n-butyl phthalate (DBP) and phenol. Degradation kinetics of DBP and phenol at different initial concentrations revealed DBP and phenol degradation to fit modified first-order models. The half-life of DBP degradation ranged from 15.81 to 27.75h and phenol degradation from 14.52 to 45.52h under the initial concentrations of 600-1200mg/L. When strain DP-2 was cultured with a mixture of DBP (800mg/L) and phenol (700mg/L), DBP degradation rate was found to be only slightly influenced; however, phthalic acid (PA) accumulated, and phenol degradation was clearly inhibited during synchronous degradation. Transcriptional levels of degradation genes, phenol hydroxylase (pheu) and phthalate 3,4-dioxygenase (pht), decreased significantly more during synchronous degradation than during individual degradation. Quantitative estimation of individual or synchronous degradation kinetics is essential to manage mixed hazardous compounds through biodegradation in industrial waste disposal.

Isolation and characterization of a novel Rhodococcus strain with switchable carbonyl reductase and para-acetylphenol hydroxylase activities

In the search for an effective biocatalyst for the reduction of acetophenones with unprotected hydroxy group on the benzene ring, a microorganism, which reduced para-acetylphenol to S-(−)-1-(para-hydroxyphenyl)ethanol under anaerobic conditions, was isolated from soil samples and the 16S rDNA study showed that it was phylogenetically affiliated with species of the genus Rhodococcus and was most similar to Rhodococcus pyridinivorans. Unexpectedly, this strain also hydroxylated para-acetylphenol to give 4-acetylcatechol in presence of oxygen, possessing para-acetylphenol hydroxylase activity. While the reduction of para-acetylphenol had an optimal reaction pH at 7 and a broad optimal temperature range (35–45 °C), the hydroxylation reached the maximum conversion at the pH range of 7–8 and 35 °C. This study identified for the first time a Rhodococcus strain with para-acetylphenol hydroxylase activity, which also contains highly enantioselective carbonyl reductase activity with potential applications for the asymmetric reduction of these less-explored but important ketones such as α-aminoacetophenone, 3′-hydroxyacetophenone and 4′-hydroxyacetophenone. The para-acetylphenol hydroxylase and carbonyl reductase activity are switchable by the reaction conditions.

Effect of surfactants on the biofilm of Rhodococcus erythropolis, a potent degrader of aromatic pollutants

Bioremediation processes based on biofilms are usually very effective. The presence of (bio)surfactants in such processes can increase bioavailability of hydrophobic pollutants in aqueous phase. However, surfactants can affect the biofilm as well as individual microbial cells in different ways. Biosurfactants produced by a microbial population can be involved in the final structure of biofilm. An external application of synthetic surfactants or 'foreign' biosurfactants often results in partial or complete destruction of the biofilm and their high concentrations also have a toxic effect on microbial cells. Finding a suitable surfactant and its concentration, which would minimize the negative effects mentioned above, would allow to construct effective bioremediation processes using the benefits of both the biofilm and the surfactant. In this context, G(+) bacterium Rhodococcus erythropolis, which has a wide potential for biodegradation of aromatic compounds, was studied. High surface hydrophobicity of its cells, given mainly by the presence of mycolic acids in the cell envelopes, allows formation of stable biofilms. Three synthetic surfactants (Spolapon AOS 146, Novanik 0633A, Tween 80) and rhamnolipid isolated from Pseudomonas aeruginosa were used. Changes in initial adhesion and biofilm formation caused by the surfactants were monitored in a flow cell equipped with hydrophilic/hydrophobic carriers and analyzed by image analysis.