Recombinant expression, purification, and antimicrobial activity of a novel hybrid antimicrobial peptide LFT33

A critical view of antimicrobial peptides: exploring their potential and the barriers to realization

The global rise of multidrug-resistant infections highlights the urgent need for innovative therapeutic strategies beyond traditional antibiotics. Antimicrobial peptides (AMPs), naturally occurring in all forms of life and synthetically producible, have garnered significant attention for their broad-spectrum antimicrobial properties and diverse mechanisms of action, including membrane disruption, immune modulation, and biofilm formation inhibition and disruption. Despite great potential, the clinical deployment of AMPs faces significant challenges, including cytotoxicity, low chemical stability, high production costs, and stringent regulatory demands. Innovative strategies, such as AMP-antibiotic conjugation, offer potential solutions to some of these challenges by enhancing efficacy, reducing toxicity, and broadening antimicrobial activity. This review critically evaluates the promise and limitations of AMPs as therapeutic antibacterial agents. We also explore the potential of AMP-antibiotic conjugates, highlighting their potential synergistic effects and the obstacles to their clinical application. Antimicrobial self-assembling peptides are also discussed, with their ability to form nanostructures that may disrupt biofilms and inhibit bacterial communication, representing a promising but complex avenue. A critical evaluation of these emerging strategies, grounded in their practical applicability and translational challenges, is essential to drive meaningful progress in combating antimicrobial resistance.

Microbial production systems and optimization strategies of antimicrobial peptides: a review

Antibiotic resistance has become a public safety issue of the twenty-first century, posing a growing threat and drawing increased attention. Compared to traditional antibiotics, antimicrobial peptides (AMPs), as naturally produced small peptides, can target multiple pathways within pathogens and render them less prone to developing resistance. This makes them promising alternatives to antibiotics. However, traditional chemical synthesis methods face challenges, such as high costs, low yields, and poor stability, limiting the large-scale industrial production of AMPs. Despite extensive research to improve AMP production efficiency, issues such as low yields and complex extraction processes continue to pose significant barriers to commercial application. Therefore, there is an urgent need for new biosynthesis strategies and optimization methods to enhance AMP production efficiency and quality. This review summarizes the sources, classification, mechanisms of action and recent advances in the microbial synthesis of AMPs. It also explores innovative production methods, including recombinant microbial expression systems, fusion tags, codon optimization, tandem multimer expression, and hybrid peptide expression. Furthermore, we review the applications of gene editing technologies and artificial intelligence in AMP production, providing new perspectives and strategies for efficient, large-scale AMP production.

Expression and characterization of the new antimicrobial peptide AP138L-arg26 anti Staphylococcus aureus

The low activity and yield of antimicrobial peptides (AMPs) are pressing problems. The improvement of activity and yield through modification and heterologous expression, a potential way to solve the problem, is a research hot-pot. In this work, a new plectasin-derived variant L-type AP138 (AP138L-arg26) was constructed for the study of recombination expression and druggablity. As a result, the total protein concentration of AP138L-arg26 was 3.1 mg/mL in Pichia pastoris X-33 supernatant after 5 days of induction expression in a 5-L fermenter. The recombinant peptide AP138L-arg26 has potential antibacterial activity against selected standard and clinical Gram-positive bacteria (G+, minimum inhibitory concentration (MIC) 2-16 µg/mL) and high stability under different conditions (temperature, pH, ion concentration) and 2 × MIC of AP138L-arg26 could rapidly kill Staphylococcus aureus (S. aureus) (> 99.99%) within 1.5 h. It showed a high safety in vivo and in vivo and a long post-antibiotic effect (PAE, 1.91 h) compared with vancomycin (1.2 h). Furthermore, the bactericidal mechanism was revealed from two dimensions related to its disruption of the cell membrane resulting in intracellular potassium leakage (2.5-fold higher than control), and an increase in intracellular adenosine triphosphate (ATP), and reactive oxygen species (ROS), the decrease of lactate dehydrogenase (LDH) and further intervening metabolism in S. aureus. These results indicate that AP138L-arg26 as a new peptide candidate could be used for more in-depth development in the future. KEY POINTS: • The AP138L-arg26 was expressed in the P. pastoris expression system with high yield • The AP138 L-arg26 showed high stability and safety in vitro and in vivo • The AP138L-arg26 killed S. aureus by affecting cell membranes and metabolism.

Improving Photocleavage Efficiency of Photocleavable Protein for Antimicrobial Peptide Histatin 1 Expression

BACKGROUND

Antimicrobial peptides (AMPs) are promising alternative agents for antibiotics to overcome antibiotic resistance problems. But, it is difficult to produce large-scale antimicrobial research due to the toxicity towards expression hosts or degradation by peptidases in the host. Therefore, heterologous recombinant expression of antimicrobial peptides has always been a challenging issue.

OBJECTIVES

To overcome toxicity to the expression host and low expression level, a new photocleavable protein fusion expression method for antimicrobial peptides is provided.3 Methods: Through directed evolution and high throughput screening, a photocleavable protein mutant R6-2-6-4 with a higher photocleavage efficiency was obtained. The DNA coding sequence of antimicrobial peptide Histatin 1 was fused within the sequence of R6-2-6-4 gene. The fusion gene was successfully expressed in Escherichia coli expression system.

RESULTS

Antimicrobial peptide Histatin 1 could be successfully expressed and purified by fusing within PhoCl mutant R6-2-6-4. The antimicrobial activity was rarely affected, and the MIC value was 33 ug/mL, which was basically equivalent to 32 ug/mL of the chemically synthesized Histatin 1. After amplification in a 5 L fermenter, the expression of PhoCl mutant (R6-2-6-4)-Histatin1 improved up to 87.6 mg/L in fermenter, and Histatin1 obtained by photocleavage also could up to 11 mg/L. The prepared Histatin1 powder remained stable when stored at 4oC for up to 4 months without any degradation. In addition, the expression and photocleavage of β -Defensin105 and Lysostaphin verified the certain universality of the PhoCl mutant fusion expression system.

CONCLUSION

Antimicrobial peptides Histatin 1, β -Defensin 105 and Lysostaphin were successfully expressed and purified by photocleavable protein mutant. This may provide a novel strategy to express and purify antimicrobial peptides in the Escherichia coli expression system.

Expression strategies for the efficient synthesis of antimicrobial peptides in plastids

Antimicrobial peptides (AMPs) kill microbes or inhibit their growth and are promising next-generation antibiotics. Harnessing their full potential as antimicrobial agents will require methods for cost-effective large-scale production and purification. Here, we explore the possibility to exploit the high protein synthesis capacity of the chloroplast to produce AMPs in plants. Generating a large series of 29 sets of transplastomic tobacco plants expressing nine different AMPs as fusion proteins, we show that high-level constitutive AMP expression results in deleterious plant phenotypes. However, by utilizing inducible expression and fusions to the cleavable carrier protein SUMO, the cytotoxic effects of AMPs and fused AMPs are alleviated and plants with wild-type-like phenotypes are obtained. Importantly, purified AMP fusion proteins display antimicrobial activity independently of proteolytic removal of the carrier. Our work provides expression strategies for the synthesis of toxic polypeptides in chloroplasts, and establishes transplastomic plants as efficient production platform for antimicrobial peptides.

Synthesis of typical sulfonamide antibiotics with [14C]- and [13C]-labeling on the phenyl ring for use in environmental studies

BACKGROUND

Due to their widespread use, sulfonamide antibiotics (SAs) have become ubiquitous environmental contaminants and thus a cause of public concern. However, a complete understanding of the behavior of these pollutants in complex environmental systems has been hampered by the unavailability and high cost of isotopically labeled SAs.

RESULTS

Using commercially available uniformly [¹⁴C]- and [¹³C]-labeled aniline as starting materials, we synthesized [phenyl-ring-¹⁴C]- and [phenyl-ring-¹³C]-labeled sulfamethoxazole (SMX), sulfamonomethoxine (SMM), and sulfadiazine (SDZ) in four-step (via the condensation of labeled N-acetylsulfanilyl chloride and aminoheterocycles) or five-step (via the condensation of labeled N-acetylsulfonamide and chloroheterocycles) reactions, with good yields (5.0-22.5% and 28.1-54.1% for [¹⁴C]- and [¹³C]-labeled SAs, respectively) and high purities (> 98.0%).

CONCLUSION

The synthesis of [¹⁴C]-labeled SAs in milligram amounts enables the preparation of labeled SAs with high specific radioactivity. The efficient and feasible methods described herein can be applied to the production of a variety of [¹⁴C]- or [¹³C]-labeled SAs for studies on their environmental behavior, including the fate, transformation, and bioaccumulation of these antibiotics in soils and aqueous systems.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1186/s12302-022-00598-z.

Production of antimicrobial peptide arasin-like Sp in Escherichia coli via an ELP-intein self-cleavage system

Antibiotic resistance is a major public health threat to both humans and animals. There is an urgent need for antimicrobial agents with novel modes of action. Antimicrobial peptides (AMPs) with broad-spectrum antimicrobial activity become the ideal alternative to traditional antibiotics. Here, the ELP-intein self-cleavage system was used to produce antimicrobial peptide arasin-likeSp in Escherichia coli. The tagged target protein (ELP-intein-arasin-likeSp) was mainly expressed in soluble, separated from cell lysates by the inverse transition cycling (ITC), and the arasin-likeSp was further purified by the self-cleavage of intein and the second round of ITC. The final yield of arasin-likeSp was about 3.56 mg/L. Purified arasin-likeSp exhibited significant antibacterial activities against the Gram-positive Bacillus subtilis and Gram-negative Vibrio harveyi bacteria. FE-SEM and PI staining analysis revealed that the arasin-likeSp treatment altered the morphology and membrane permeability of Bacillus subtilis and Vibrio harveyi. Collectively, these data suggest that arasin-likeSp is a candidate AMP for effective inhibition of Vibrio harveyi, a significant bacterial pathogen infecting marine fish and invertebrates. The ELP-intein self-cleavage system described here is a low-cost, simple and potential method for producing antimicrobial peptides, which lays foundations for the large-scale production of antimicrobial peptides in the future.

Construction of a Tandem Repeat Peptide Sequence with Pepsin Cutting Sites to Produce Recombinant α-Melanocyte-Stimulating Hormone

The production of α-melanocyte-stimulating hormone (α-MSH), a peptide hormone composed of 13 amino acids, is attempted by recombinant expression using E. coli as the host. To achieve this aim, a synthetic gene containing eight tandem repeats of msh gene (8msh) was designed for ribosomal synthesis of 8 α-MSH. The merit of the strategy is to diminish the peptide toxicity against the host cell and to achieve a higher production yield. Pepsin cleavage sites are introduced between the peptides for enzymatic proteolysis to obtain the monomeric peptide of α-MSH. The constructed plasmid was transformed into different strains of E. coli hosts, and E. coli XL1-Blue with gene 8msh revealed the highest yield of 8 α-MSH. Although 8 α-MSH was fractionalized in the insoluble pellets after cell lysis, pepsin cleavage was able to produce soluble α-MSH peptide, as analyzed and confirmed by mass spectrometry and peptide activity assays. The production of α-MSH was quantified using HPLC with a yield of 42.9 mg/L of LB culture. This study demonstrates the feasibility of producing α-MSH using recombinant expression of tandem repeat gene. The production procedure involves minimal post-treatment and processing and can be scaled up for industrial application.

Functional Characterization of Porcine NK-Lysin: A Novel Immunomodulator That Regulates Intestinal Inflammatory Response

Porcine NK-Lysine (PNKL) is a new antimicrobial peptide (AMP) identified in the small intestine. In this study, PNKL protein was obtained through heterologous expression in Escherichia coli and was estimated by SDS-PAGE at 33 kDa. The antibacterial activities of PNKL were determined using various bacterial strains and showed broad-spectrum antimicrobial activity against Gram-negative and Gram-positive bacteria. Furthermore, E. coli K88-challenged IPEC-J2 cells were used to determine PNKL influences on inflammatory responses. Hemolytic assays showed that PNKL had no detrimental impact on cell viability. Interestingly, PNKL elevated the viability of IPEC-J2 cells exposure to E. coli K88. PNKL significantly decreased the cell apoptosis rate, and improved the distribution and abundance of tight junction protein ZO-1 in IPEC-J2 cells upon E. coli K88-challenge. Importantly, PNKL not only down regulated the expressions of inflammatory cytokines such as the IL-6 and TNF-α, but also down regulated the expressions of NF-κB, Caspase3, and Caspase9 in the E. coli K88-challenged cells. These results suggest a novel function of natural killer (NK)-lysin, and the anti-bacterial and anti-inflammatory properties of PNKL may allow it a potential substitute for conventionally used antibiotics or drugs.

Strategies for recombinant production of antimicrobial peptides with pharmacological potential

INTRODUCTION

The need to develop new drugs for the control of pathogenic microorganisms has redoubled efforts to prospect for antimicrobial peptides (AMPs) from natural sources and to characterize its structure and function. These molecules present a broad spectrum of action against different microorganisms and frequently present promiscuous action, with anticancer and immunomodulatory activities. Furthermore, AMPs can be used as biopharmaceuticals in the treatment of hospital-acquired infections and other serious diseases with relevant social and economic impacts.Areas covered: The low yield and the therefore difficult extraction and purification process in AMPs are problems that limit their industrial application and scientific research. Thus, optimized heterologous expression systems were developed to significantly boost AMP yields, allow high efficiency in purification and structural optimization for the increase of therapeutic activity.Expert opinion: This review provides an update on recent developments in the recombinant production of ribosomal and non-ribosomal synthesis of AMPs and on strategies to increase the expression of genes encoding AMPs at the transcriptional and translational levels and regulation of the post-translational modifications. Moreover, there are detailed reports of AMPs that have already reached marketable status or are in the pipeline under advanced stages of preclinical testing.

Differential expression, molecular cloning, and characterization of porcine beta defensin 114

Background

β-defensins have attracted considerable research interest because of their roles in protecting hosts from various pathogens. This study was conducted to investigate the expression profiles of the porcine β-defensin 114 (PBD114) in different breeds and in response to infections. Moreover, the function of PBD114 protein was partially investigated.

Methods

Six Tibetan pigs (TP) and six DLY (Duroc×Landrace×Yorkshire) pigs were slaughtered to explore the expression profiles of PBD114 in different breeds and tissues. For infection models, sixteen DLY pigs were divided into two groups and challenged either with sterile saline or E. coli K88. The recombinant protein PBD114 (rPBD114) was obtained by using a heterologous expression system in E. coli.

Results

PBD114 gene was highly expressed in tissues such as the intestine, liver, spleen, and thymus. Interestingly, the expression level of PBD114 gene was higher in the TP pigs than in the DLY pigs (P < 0.05), and was significantly elevated upon E. coli K88 challenge (P < 0.05). The nucleotide sequences of PBD114 from Tibetan and DLY pigs was identical, and both showed a 210-bp open reading frame encoding a 69-amino acid mature peptide. To explaore the function of PBD114 protein, PBD114 gene was successfully expressed in E. coli Origami B (DE3) and the molecular weight of the rPBD114 was estimated by SDS-PAGE to be 25 kDa. The rPBD114 was purified and mass spectrometry verified the protein as PBD114. Importantly, rPBD114 showed antimicrobial activities against E. coli DH5α and E. coli K88, and the minimal inhibitory concentrations (MICs) were 64 and 128 μg/mL, respectively. Hemolytic and cytotoxicity assays showed that rPBD114 did not affect cell viability under physiological concentrations.

Conclusions

PBD114 is an infection response gene that is differentially-expressed between different porcine breeds and tissues. The antimicrobial activity of PBD114 protein, against pathogens such as the E. coli K88, suggested that it may serve as a candidate for the substitution of conventionally used antibiotics.

Electronic supplementary material

The online version of this article (10.1186/s40104-019-0367-0) contains supplementary material, which is available to authorized users.

Rapid and efficient production of cecropin A antibacterial peptide in Escherichia coli by fusion with a self-aggregating protein

BACKGROUND

Cecropin A (CeA), a natural cationic antimicrobial peptide, exerts potent antimicrobial activity against a broad spectrum of Gram-positive and Gram-negative bacteria, making it an attractive candidate substitute for antimicrobials. However, the low production rate and cumbersome, expensive processes required for both its recombinant and chemical synthesis have seriously hindered the exploitation and application of CeA. Here, we utilized a short β-structured self-aggregating protein, ELK16, as a fusion partner of CeA, which allowed the efficient production of high-purity CeA antibacterial peptide with a simple inexpensive process.

RESULTS

In this study, three different approaches to the production of CeA peptide were investigated: an affinity tag (His-tag)-fused protein expression system (AT-HIS system), a cell-free protein expression system (CF system), and a self-assembling peptide (ELK16)-fused protein expression system (SA-ELK16 system). In the AT-HIS and CF systems, the CeA peptide was obtained with purities of 92.1% and 90.4%, respectively, using one or more affinity-chromatographic purification steps. The procedures were tedious and costly, with CeA yields of only 0.41 and 0.93 μg/mg wet cell weight, respectively. Surprisingly, in the SA-ELK16 system, about 6.2 μg/mg wet cell weight of high-purity (approximately 99.8%) CeA peptide was obtained with a simple low-cost process including steps such as centrifugation and acetic acid treatment. An antimicrobial test showed that the high-purity CeA produced in this study had the same antimicrobial activity as synthetic CeA peptide.

CONCLUSIONS

In this study, we designed a suitable expression system (SA-ELK16 system) for the production of the antibacterial peptide CeA and compared it with two other protein expression systems. A high yield of high-purity CeA peptide was obtained with the SA-ELK16 system, which greatly reduced the cost and time required for downstream processing. This system may provide a platform for the laboratory scale production of the CeA antibacterial peptide.

High Level Expression and Purification of the Clinically Active Antimicrobial Peptide P-113 in Escherichia coli

P-113, which was originally derived from the human saliva protein histatin 5, is a histidine-rich antimicrobial peptide with the sequence AKRHHGYKRKFH. P-113 is currently undergoing phase II clinical trial as a pharmaceutical agent to fight against fungal infections in HIV patients with oral candidiasis. Previously, we developed a new procedure for the high-yield expression and purification of hG31P, an analogue and antagonist of human CXCL8. Moreover, we have successfully removed lipopolysaccharide (LPS, endotoxin) associated with hG31P in the expression with Escherichia coli. In this paper, we have used hG31P as a novel fusion protein for the expression and purification of P-113. The purity of the expressed P-113 is more than 95% and the yield is 4 mg P-113 per liter of E. coli cell culture in Luria-Bertani (LB) medium. The antimicrobial activity of the purified P-113 was tested. Furthermore, we used circular dichroism (CD) and nuclear magnetic resonance (NMR) spectroscopy to study the structural properties of P-113. Our results indicate that using hG31P as a fusion protein to obtain large quantities of P-113 is feasible and is easy to scale up for commercial production. An effective way of producing enough P-113 for future clinical studies is evident in this study.

The Antifungal Activity of Lactoferrin and Its Derived Peptides: Mechanisms of Action and Synergy with Drugs against Fungal Pathogens

Lactoferrin is a multifunctional iron-binding glycoprotein belonging to the transferrin family. It is found abundantly in milk and is present as a major protein in human exocrine secretions where it plays a role in the innate immune response. Various antifungal functions of lactoferrin have been reported including a wide spectrum of activity across yeasts and molds and synergy with other antifungal drugs in combination therapy, and various modes of action have been proposed. Bioactive peptides derived from lactoferrin can also exhibit strong antifungal activity, with some surpassing the potency of the whole protein. This paper reviews current knowledge of the spectrum of activity, proposed mechanisms of action, and capacity for synergy of lactoferrin and its peptides, including the three most studied derivatives: lactoferricin, lactoferrampin, and Lf(1-11), as well as some lactoferrin-derived variants and modified peptides.

Production of a polar fish antimicrobial peptide in Escherichia coli using an ELP-intein tag

An important aspect related to infectious pathogens is their exceptional adaptability in developing resistance, which leads to a perpetual challenge in the discovery of antimicrobial drugs with novel mechanisms of action. Among them, antimicrobial peptides (AMPs) stand out as promising anti-infective molecules. In order to overcome the high costs associated with isolation from natural sources or chemical synthesis of AMPs we propose the expression of Pa-MAP 2, a polyalanine AMP. Pa-MAP 2 was fused to an ELP-intein tag where the ELP (Elastin-like polypeptide) was used to promote aggregation and fast and cost-effective isolation after expression, and the intein was used to stimulate a controlled AMP release. For these, the vector pET21a was used to produce Pa-MAP 2 fused to the N-termini region of a modified Mxe GyrA intein followed by 60 repetitions of ELP. Purified Pa-MAP 2 showed a MIC of 25μM against E. coli ATCC 8739. Batch fermentation demonstrated that Pa-MAP-2 can be produced in both rich and defined media at yields 50-fold higher than reported for other AMPs produced by the ELP-intein system, and in comparable yields to expression systems with protease or chemical cleavage.

Suppression of the toxicity of Bac7 (1-35), a bovine peptide antibiotic, and its production in E. coli

Bac7 (1-35) is an Arg- and Pro-rich peptide antibiotic, produced in bovine cells to protect them from microbial infection. It has been demonstrated to inhibit the protein synthesis in E. coli, leading to cell death. Because of its toxicity, no cost effective methods have been developed for Bac7 production in Escherichia coli for its potential clinical use. Here, we found a method to suppress Bac7 (1-35) toxicity in E. coli to establish its high expression system, in which Bac7 (1-35) was fused to the C-terminal end of protein S, a major spore-coat protein from Myxococcus xanthus, using a linker containing a Factor Xa cleavage site. The resulting His6-PrS2-Bac7 (1-35) (PrS2 is consisted of two N-terminal half domains of protein S connected in tandem) was well expressed using the Single-Protein Production (SPP) system at low temperature and subsequently purified in a single step by using a Ni column. The combination of protein S fusion and its expression in the SPP system at low temperature appeared to suppress Bac7 (1-35) toxicity. Both the purified His6-PrS2-Bac7 (1-35) and His6-PrS2-Bac7 (1-35) treated by Factor Xa were proven to be a potent inhibitor for cell-free protein synthesis.

Expression of porcine protegrin-1 in Pichia pastoris and its anticancer activity in vitro

Protegrin-1 (PG-1), a β-hairpin antimicrobial peptide (AMP), is amongst the shortest AMPs in sequence length while remaining active against a variety of microorganisms. The aim of this study was produce recombinant PG-1 and investigate its anticancer activity. A DNA sequence encoding the mature PG-1, fused with a 6His-tag, was cloned into the pPICZα-A vector and transformed into Pichia pastoris. Expression was induced following culture for ~96 h with 1% methanol at 28°C, and ~15.6 mg PG-1 was expressed in 100 ml culture medium. Following purification using a Ni-chelating Sepharose column, ~20 mg pure active PG-1 was obtained from 500 ml culture broth supernatant. The expressed PG-1/6His exhibited strong dose- and time-dependent anticancer activity against HepG2 cells in vitro.

Detection of cystatin C biomarker for clinical measurement of renal disease by developed ELISA diagnostic kits

Background

Human cystatin C (HCC) is a potential biomarker for tubular damage and impaired renal function. It is difficult to obtain efficient paired monoclonal antibodies against HCC with low molecular to meet the requirements for clinical application The present study was to establish a stable and repeatable measurement for HCC with self-made monoclonal antibodies (McAbs) and Variable domain of heavy chain of heavy-chain antibody (VHHs) increase the sensitivity.

Methods

With hybridoma technology and phage display technology: R-HCC as a screening antigen and N-HCC as the detector for antigens to obtain the specific antibody and established an enzyme-linked immunosorbent assay for human cystatin C using self-made McAbs and VHHs.

Results

We have successfully obtained three McAbs; 5 F2, 4E4, 1E11 and four VHHs; 3-2, 3-24, 3-33 and 4-5 which were specific for HCC. The measurement of HCC was established with the self-made monoclonal antibodies and VHHs with a high sensitivity the lower limit of detection at 0.5 ng/ml and the detection range at 0.5 ~ 31.3 ng/ml.

Conclusion

Our data provides a new approach for paired antibody screening and testing of the small molecular biomarker with a single dominant epitope, with the important biological and clinical significance.

Current scenario of peptide-based drugs: the key roles of cationic antitumor and antiviral peptides

Cationic antimicrobial peptides (AMPs) and host defense peptides (HDPs) show vast potential as peptide-based drugs. Great effort has been made in order to exploit their mechanisms of action, aiming to identify their targets as well as to enhance their activity and bioavailability. In this review, we will focus on both naturally occurring and designed antiviral and antitumor cationic peptides, including those here called promiscuous, in which multiple targets are associated with a single peptide structure. Emphasis will be given to their biochemical features, selectivity against extra targets, and molecular mechanisms. Peptides which possess antitumor activity against different cancer cell lines will be discussed, as well as peptides which inhibit virus replication, focusing on their applications for human health, animal health and agriculture, and their potential as new therapeutic drugs. Moreover, the current scenario for production and the use of nanotechnology as delivery tool for both classes of cationic peptides, as well as the perspectives on improving them is considered.

Recombinant expression of novel protegrin-1 dimer and LL-37-linker-histatin-5 hybrid peptide mediated biotin carboxyl carrier protein fusion partner

Antimicrobial peptides (AMPs) hold great promise as potential therapeutic approach for curing of infectious diseases. Prokaryotic protein expression renders high scalability with an effective purification of several heterogeneous proteins. However, it might be inappropriate for recombinant AMPs expression thereby its antimicrobial activity against the host cells. Several fusion partners demonstrated antimicrobial activity neutralization of AMPs expression and purification in Escherichia coli. In order to improve the antimicrobial effect, several hybrid AMPs have been designed and developed. As expected to increase the antimicrobial activity, a dimeric form of porcine protegrin-1 (PG-1) and human LL-37-linker-histatin-5 (LL-37-linker-Hst-5) hybrid peptide were alternatively constructed in this study. Hydroxylamine hydrochloride and thrombin cleavage sites were designed for releasing of hybrid peptide and PG-1 dimer from biotin carboxyl carrier protein (BCCP) fusion partner. The full-length AMPs gene was connected down-stream of BCCP gene using the overlap extension-PCR, cloned into pET-28a vector and expressed in E. coli BL21(DE3)pLysS. After IPTG induction, approximately 20% of BCCP-AMPs was expressed as intracytoplasmic inclusion bodies with an expected molecular weight of 24.5kDa. The mean of purified and refolded BCCP-AMPs was 1.5mg/L with 76% purity. The presence of expressed protein was subsequently determined by Western blotting analysis. Finally, radial diffusion assay supported that these peptides displayed functional antimicrobial activity against E. coli and Staphylococcus aureus standard strains. Two novel AMPs established in this study would be potentially developed as extensive intervention for treating of infectious diseases.

Expression and characterization of cecropinXJ, a bioactive antimicrobial peptide from Bombyx mori (Bombycidae, Lepidoptera) in Escherichia coli

Insect antimicrobial peptides (AMPs) have a broad antimicrobial spectrum. To aid the characterization of the gene function and further applications, we cloned the gene of cecropinXJ into the prokaryotic expression vector pET32a and expressed cecropinXJ in Escherichia coli BL2l (DE3). Following induction by isopropyl-β-D-thiogalactoside (IPTG), a 25 kDa fusion peptide of cecropinXJ with a tagged thioredoxin (Trx) protein was highly expressed in E. coli. The yield was 10 mg/l culture medium following purification on nickel-nitrilotriacetic acid (Ni-NTA) metal affinity chromatography matrices. The purified recombinant antibacterial peptide, cecropinXJ, retained a high stability against Staphylococcus aureus over a temperature range from 4 to 100°C and a pH range from pH 2.0 to 12.0. The minimum inhibitory concentration (MIC) of the fusion protein against S. aureus was 0.4 μM. The recombinant cecropinXJ is also cytotoxic to several types of human cancer cells.

Manufacturing of peptides exhibiting biological activity

Numerous studies have shown that food proteins may be a source of bioactive peptides. Those peptides are encrypted in the protein sequence. They stay inactive within the parental protein until release by proteolytic enzymes (Mine and Kovacs-Nolan in Worlds Poult Sci J 62(1):87-95, 2006; Hartman and Miesel in Curr Opin Biotechnol 18:163-169, 2007). Once released the bioactive peptides exhibit several biofunctionalities and may serve therapeutic roles in body systems. Opioid peptides, peptides lowering high blood pressure, inhibiting platelet aggregation as well as being carriers of metal ions and peptides with immunostimulatory, antimicrobial and antioxidant activities have been described (Hartman and Miesel in Curr Opin Biotechnol 18:163-169, 2007). The biofunctional abilities of the peptides have therefore aroused a lot of scientific, technological and consumer interest with respect to the role of dietary proteins in controlling and influencing health (Möller et al. in Eur J Nutr 47(4):171-182, 2008). Biopeptides may find wide application in food production, the cosmetics industry as well as in the prevention and treatment of various medical conditions. They are manufactured by chemical and biotechnological methods (Marx in Chem Eng News 83(11):17-24. 2005; Hancock and Sahl in Nat Biotechnol 24(12):1551-1557, 2006). Depending on specific needs (food or pharmaceutical industry) different degrees of peptide purifications are required. This paper discusses the practicability of manufacturing bioactive peptides, especially from food proteins.

Expression systems for heterologous production of antimicrobial peptides

Antimicrobial peptides (AMPs) consist of molecules that act on the defense systems of numerous organisms toward multiple pathogens such as bacteria, fungi, parasites and viruses. These compounds have become extremely significant due to the increasing resistance of microorganisms to common antibiotics. However, the low quantity of peptides obtained from direct purification is, to date, still a remarkable bottleneck for scientific and industrial research development. Therefore, this review describes the main heterologous systems currently used for AMP production, including bacteria, fungi and plants, and also the related strategies for reaching greater functional peptide production. The main difficulties of each system are also described in order to provide some directions for AMP production. In summary, data revised here indicate that large-scale production of AMPs can be obtained using biotechnological tools, and the products may be applied in the pharmaceutical industry as well as in agribusiness.