Molecular cloning, purification, and characterization of a novel polyMG-specific alginate lyase responsible for alginate MG block degradation in Stenotrophomas maltophilia KJ-2

Characterization of alginate-degrading bacteria isolated from seaweed-producing areas of South Korean territory and verification of the bacteria as plant growth-promoting biofertilizer

Alginate, a carbohydrate polymer produced by seaweed and some bacteria, is widely used in the food and medicine industries. Alginate oligosaccharides, produced by depolymerizing alginate, exhibit diverse biological functions, such as plant protection and growth promotion, enhancement of microbial metabolic activity, and potential applications in biofuel production. This study isolated 13 alginate-degrading bacterial strains from over a thousand seaside soil bacteria in South Korea and investigated their alginate-degrading characteristics. Through 16S rDNA sequencing, Marinomonas sp., Zobellella sp., and Pseudomonas sp. were newly identified at the subspecies level. Notably, this study is the first to report the alginate-degrading capability of Zobellella sp. The substrate specificity of each bacterial strain was analyzed toward poly-α-L-guluronate and poly-β-D-mannuronate, the two major alginate polymeric components. Furthermore, 3 of the 13 isolated strains were demonstrated to synthesize auxin, and their application to Arabidopsis thaliana confirmed enhanced vegetative growth. These findings advance our understanding of alginate degradation and highlight the potential of these bacteria and their alginate lyases as valuable resources in biotechnology applications. In addition, the potential of these bacteria as biofertilizers for promoting plant growth and the production of functional alginate oligosaccharides underscores the need for further exploration and development in this field.IMPORTANCEThis study aimed to isolate alginate-degrading bacteria from the soil samples collected in South Korea's major seaweed production areas and evaluate their potential as biofertilizers. Alginate, a primary component of brown algae, breaks down into alginate oligosaccharides, which are known to enhance plant growth. In this study, 13 strains of alginate-degrading bacteria were isolated, and some of them showed the potential for plant growth promotion and stress defense through strong biofilm formation and auxin production. Importantly, these bacterial strains exhibited plant growth-promoting potential, demonstrating their applicability in combination with seaweed-based fertilizers. These findings provide valuable insights that could broaden the industrial utilization of seaweed-derived fertilizers, contributing to enhanced agricultural productivity and sustainability.

The Controlled Release of Abscisic Acid (ABA) Utilizing Alginate-Chitosan Gel Blends: A Synergistic Approach for an Enhanced Small-Molecule Delivery Controller

The integration of abscisic acid (ABA) into a chitosan-alginate gel blend unveils crucial insights into the formation and stability of these two substances. ABA, a key phytohormone in plant growth and stress responses, is strategically targeted for controlled release within these complexes. This study investigates the design and characterization of this novel controlled-release system, showcasing the potential of alginate-chitosan gel blends in ABA delivery. Computational methods, including molecular dynamics simulations, are employed to analyze the structural effects of microencapsulation, offering valuable insights into complex behavior under varying conditions. This paper focuses on the controlled release of ABA from these complexes, highlighting its strategic importance in drug delivery systems and beyond. This controlled release enables targeted and regulated ABA delivery, with far-reaching implications for pharmaceuticals, agriculture, and plant stress response studies. While acknowledging context dependency, the paper suggests that the liberation or controlled release of ABA holds promise in applications, urging further research and experimentation to validate its utility across diverse fields. Overall, this work significantly contributes to understanding the characteristics and potential applications of chitosan-alginate complexes, marking a noteworthy advancement in the field of controlled-release systems.

Characterization of bifunctional alginate lyase Aly644 and antimicrobial activity of enzymatic hydrolysates

An alginate lyase gene aly644 encoding a member of polysaccharide lyase family 6 was obtained from a metagenome of Antarctic macroalgae-associated microbes. The gene was expressed heterologously in Escherichia coli, and the recombinant protein was purified using a Ni-NTA His Tag Kit. With sodium alginate as the substrate, recombinant Aly644 exhibited an optimum reaction temperature of 50°C and an optimum reaction pH of 7.0. The Vmax and Km values of Aly644 toward sodium alginate were 112.36 mg/mL·min and 16.75 mg/mL, respectively. Substrate specificity analysis showed that Aly644 was a bifunctional alginate lyase that hydrolyzed both polyguluronic acid and polymannuronic acid. The hydrolysis products of Aly644 with sodium alginate as the substrate were detected by thin-layer chromatography, and were mainly di- and trisaccharides. The oligosaccharides produced by degradation of sodium alginate by Aly644 inhibited the mycelial growth of the plant pathogens Phytophthora capsici and Fulvia fulva; the 50% maximal effective concentration (EC50) values were 297.45 and 452.89 mg/L, and the 90% maximal effective concentration (EC90) values were 1341.45 and 2693.83 mg/L, respectively. This highlights that Aly644 is a potential candidate enzyme for the industrial production of alginate oligosaccharides with low degree of polymerization. Enzyme-hydrolyzed alginate oligosaccharides could support the development of green agriculture as natural antimicrobial agents. KEY POINTS: • An alginate lyase was obtained from a metagenome of Antarctic macroalgae-associated microbes. • Aly644 is a bifunctional alginate lyase with excellent thermostability and pH stability. • The enzymatic hydrolysates of Aly644 directly inhibited Phytophthora capsici and Fulvia fulva.

Three alginate lyases provide a new gut Bacteroides ovatus isolate with the ability to grow on alginate

Humans consume alginate in the form of seaweed, food hydrocolloids, and encapsulations, making the digestion of this mannuronic acid (M) and guluronic acid (G) polymer of key interest for human health. To increase knowledge on alginate degradation in the gut, a gene catalog from human feces was mined for potential alginate lyases (ALs). The predicted ALs were present in nine species of the Bacteroidetes phylum, of which two required supplementation of an endo-acting AL, expected to mimic cross-feeding in the gut. However, only a new isolate grew on alginate. Whole-genome sequencing of this alginate-utilizing isolate suggested that it is a new Bacteroides ovatus strain harboring a polysaccharide utilization locus (PUL) containing three ALs of families: PL6, PL17, and PL38. The BoPL6 degraded polyG to oligosaccharides of DP 1-3, and BoPL17 released 4,5-unsaturated monouronate from polyM. BoPL38 degraded both alginates, polyM, polyG, and polyMG, in endo-mode; hence, it was assumed to deliver oligosaccharide substrates for BoPL6 and BoPL17, corresponding well with synergistic action on alginate. BoPL17 and BoPL38 crystal structures, determined at 1.61 and 2.11 Å, respectively, showed (α/α)6-barrel + anti-parallel β-sheet and (α/α)7-barrel folds, distinctive for these PL families. BoPL17 had a more open active site than the two homologous structures. BoPL38 was very similar to the structure of an uncharacterized PL38, albeit with a different triad of residues possibly interacting with substrate in the presumed active site tunnel. Altogether, the study provides unique functional and structural insights into alginate-degrading lyases of a PUL in a human gut bacterium.IMPORTANCEHuman ingestion of sustainable biopolymers calls for insight into their utilization in our gut. Seaweed is one such resource with alginate, a major cell wall component, used as a food hydrocolloid and for encapsulation of pharmaceuticals and probiotics. Knowledge is sparse on the molecular basis for alginate utilization in the gut. We identified a new Bacteroides ovatus strain from human feces that grew on alginate and encoded three alginate lyases in a gene cluster. BoPL6 and BoPL17 show complementary specificity toward guluronate (G) and mannuronate (M) residues, releasing unsaturated oligosaccharides and monouronic acids. BoPL38 produces oligosaccharides degraded by BoPL6 and BoPL17 from both alginates, G-, M-, and MG-substrates. Enzymatic and structural characterization discloses the mode of action and synergistic degradation of alginate by these alginate lyases. Other bacteria were cross-feeding on alginate oligosaccharides produced by an endo-acting alginate lyase. Hence, there is an interdependent community in our guts that can utilize alginate.

Improving the thermostability of a novel PL-6 family alginate lyase by rational design engineering for industrial preparation of alginate oligosaccharides

Alginate is degraded into alginate oligosaccharides with various biological activities by enzymes. However, the thermostability of the enzyme limits its industrial application. In this study, a novel PL-6 alginate lyase, AlyRm6A from Rhodothermus marinus 4252 was expressed and characterized. In addition, an efficient comprehensive strategy was proposed, including automatic design of heat-resistant mutants, multiple computer-aided ΔΔGfold value calculation, and conservative analysis of mutation sites. AlyRm6A has naturally high thermostability. Compared with the WT, T43I and Q216I kept their original activities, and their half-lives were increased from 3.68 h to 4.29 h and 4.54 h, melting point temperatures increased from 61.5 °C to 62.9 °C and 63.5 °C, respectively. The results of circular dichroism showed that both the mutants and the wild type had the characteristic peaks of β-sheet at 195 nm and 216 nm, which indicated that there was no significant effect on the secondary structure of the protein. Molecular dynamics simulation (MD) analyses suggest that the enhancement of the hydrophobic interaction network, improvement of molecular rigidity, and denser structure could improve the stability of AlyRm6A. To the best of our knowledge, our findings indicate that AlyRm6A mutants exhibit the highest thermostability among the characterized PL-6 alginate lyases, making them potential candidates for industrial production of alginate oligosaccharides.

Development and Evaluation of Cross-Linked Alginate-Chitosan-Abscisic Acid Blend Gel

Abscisic acid (ABA) has been proposed to play a significant role in the ripening of nonclimacteric fruit, stomatal opening, and response to abiotic stresses in plants, which can adversely affect crop growth and productivity. The biological effects of ABA are dependent on its concentration and signal transduction pathways. However, due to its susceptibility to the environment, it is essential to find a suitable biotechnological approach to coat ABA for its application. One promising approach is to utilize alginate and chitosan, two natural polysaccharides known for their strong affinity for water and their ability to act as coating agents. In this study, an alginate-chitosan blend was employed to develop an ABA cover. To achieve this, an alginate-chitosan-abscisic acid (ALG-CS-ABA) blend was prepared by forming ionic bonds or complexes with calcium ions, or through dual cross-linking. This was done by dripping a homogeneous solution of alginate-chitosan and ABA into a calcium chloride solution, resulting in the formation of the blend. By combining the unique properties of alginate, chitosan, and ABA, the resulting ALG-CS-ABA blend can potentially offer enhanced stability, controlled release, and improved protection of ABA. These characteristics make it a promising biotechnological approach for various applications, including the targeted delivery of ABA in agricultural practices or in the development of innovative plant-based products. Further evaluation and characterization of the ALG-CS-ABA blend will provide valuable insights into its potential applications in the fields of biomedicine, agriculture, and tissue engineering.

Characterization of a thermostable PL-31 family alginate lyase from Paenibacillus ehimensis and its application for alginate oligosaccharides bioproduction

Currently, people pay more attention to marine sugars, because of their unique physiological effects. Alginate oligosaccharides (AOS) are the degradation products of alginate and have been used in food, cosmetic, and medicine fields. AOS display good physical characteristics (low relative molecular weight, good solubility, high safety, and high stability) and excellent physiological functions (immunomodulatory, antioxidant, antidiabetic, and prebiotic activities). Alginate lyase plays a key role in the AOS bioproduction. In this study, a novel PL-31 family alginate lyase from Paenibacillus ehimensis (paeh-aly) was identified and characterized. It was extracellularly secreted in E. coli and exhibited a preference for the substrate poly β-D-mannuronate. Using sodium alginate as the substrate, it showed the maximum catalytic activity (125.7 U/mg) at pH 7.5 and 55 °C with 50 mM NaCl. Compared with other alginate lyases, paeh-aly exhibited good stability. About 86.6% and 61.0% residual activity could be maintained after 5 h incubation at 50 and 55 °C respectively, and its T_m value was 61.5 °C. The degradation products were AOS with DP 2-4. Paeh-aly demonstrated strong promise for AOS industrial production because of its excellent thermostability and efficiency.

Identification and Characterization of a New Cold-Adapted and Alkaline Alginate Lyase TsAly7A from Thalassomonas sp. LD5 Produces Alginate Oligosaccharides with High Degree of Polymerization

Alginate oligosaccharides (AOS) and their derivatives become popular due to their favorable biological activity, and the key to producing functional AOS is to find efficient alginate lyases. This study showed one alginate lyase TsAly7A found in Thalassomonas sp. LD5, which was predicted to have excellent industrial properties. Bioinformatics analysis and enzymatic properties of recombinant TsAly7A (rTsAly7A) were investigated. TsAly7A belonged to the fifth subfamily of polysaccharide lyase family 7 (PL7). The optimal temperature and pH of rTsAly7A was 30 °C and 9.1 in Glycine-NaOH buffer, respectively. The pH stability of rTsAly7A under alkaline conditions was pretty good and it can remain at above 90% of the initial activity at pH 8.9 in Glycine-NaOH buffer for 12 h. In the presence of 100 mM NaCl, rTsAly7A showed the highest activity, while in the absence of NaCl, 50% of the highest activity was observed. The rTsAly7A was an endo-type alginate lyase, and its end-products of alginate degradation were unsaturated oligosaccharides (degree of polymerization 2-6). Collectively, the rTsAly7A may be a good industrial production tool for producing AOS with high degree of polymerization.

Characterization of degradation patterns and enzymatic properties of a novel alkali-resistant alginate lyase AlyRm1 from Rubrivirga marina

Alginate lyase is essential for the production of alginate oligosaccharides (AOSs), which exhibit diverse bioactivities and have numerous applications in the food and pharmaceutical industries. The creation of recombinant alginate lyase by genetic engineering lays a crucial foundation for the commercialization of alginate lyase. This study cloned and expressed the polysaccharide lyase family 6 (PL6) alginate lyase gene alyrm1 from Rubrivirga marina.The optimum temperature and pH for recombinant AlyRm1 are 30 °C and 10.0, respectively. AlyRm1 shows good alkaline stability, for it remained over 80% of the enzyme activity after being incubated at pH 10.0 for 24 h AlyRm1 preferentially degrades PolyM into AOSs with degrees of polymerization (DP) 2-5 and monosaccharides as an endolytic bifunctional lyase. In addition, the analysis of degradation products toward oligosaccharides revealed that the minimal substrate of AlyRm1 is trisaccharide and clarified the degradation patterns.

A bifunctional exolytic alginate lyase from Microbulbifer sp. ALW1 with salt activation and calcium-dependent catalysis

Alginate lyases can depolymerize alginate to oligomers with potential applications in many fields. Here a new alginate lyase, namely AlgL6, was characterized from Microbulbifer sp. ALW1, phylogenetically classified into the polysaccharide lyase family 6 (PL6). The recombinant alginate lyase AlgL6 exerted enzymatic activities towards polymannuronate, polyguluronate, and sodium alginate in an exolytic manner. AlgL6 had an optimum temperature of 35 °C and good stability at 30 °C or below. Its optimum pH was 8.0, and it had good stability over the pH range of 5.0-9.0. AlgL6 exhibited excellent halo-stability against Na⁺, and its activity can be increased up to about 1.8 times by 0.5 M NaCl. AlgL6 also showed strong stability in the presence of some nonionic detergents such as Tween 20 and Tween 80. The degradation products of sodium alginate by AlgL6 exhibited more effective antioxidant activities than the undigested polysaccharides. Structure analysis illustrated the catalytic mechanism defined by the coordination of the acid/base residues Arg269 and Lys248 of AlgL6. The replacement of Ca²⁺-interacting amino acid residues in AlgL6 and depletion of Ca²⁺ suggested the involvement of Ca²⁺ in the enzyme's catalytic activity. These properties of AlgL6 supply support to its industrial application for development of alginate bioresource.

Alginate oligosaccharides: The structure-function relationships and the directional preparation for application

Alginate oligosaccharides (AOS) are degradation products of alginate extracted from brown algae. With low molecular weight, high water solubility, and good biological activity, AOS present anti-inflammatory, antimicrobial, antioxidant, and antitumor properties. They also exert growth-promoting effects in animals and plants. Three types of AOS, mannuronate oligosaccharides (MAOS), guluronate oligosaccharides (GAOS), and heterozygous mannuronate and guluronate oligosaccharides (HAOS), can be produced from alginate by enzymatic hydrolysis. Thus far, most studies on the applications and biological activities of AOS have been based mainly on a hybrid form of HAOS. To improve the directional production of AOS for practical applications, systematic studies on the structures and related biological activities of AOS are needed. This review provides a summary of current understanding of structure-function relationships and advances in the production of AOS. The current challenges and opportunities in the application of AOS is suggested to guide the precise application of AOS in practice.

Cloning and Characterization of a Novel Alginate Lyase from Paenibacillus sp. LJ-23

As a low molecular weight alginate, alginate oligosaccharides (AOS) exhibit improved water solubility, better bioavailability, and comprehensive health benefits. In addition, their biocompatibility, biodegradability, non-toxicity, non-immunogenicity, and gelling capability make them an excellent biomaterial with a dual curative effect when applied in a drug delivery system. In this paper, a novel alginate lyase, Algpt, was cloned and characterized from a marine bacterium, Paenibacillus sp. LJ-23. The purified enzyme was composed of 387 amino acid residues, and had a molecular weight of 42.8 kDa. The optimal pH of Algpt was 7.0 and the optimal temperature was 45 °C. The analysis of the conserved domain and the prediction of the three-dimensional structure indicated that Algpt was a novel alginate lyase. The dominant degradation products of Algpt on alginate were AOS dimer to octamer, depending on the incubation time, which demonstrated that Algpt degraded alginate in an endolytic manner. In addition, Algpt was a salt-independent and thermo-tolerant alginate lyase. Its high stability and wide adaptability endow Algpt with great application potential for the efficient preparation of AOS with different sizes and AOS-based products.

Marine microbial enzymes for the production of algal oligosaccharides and its bioactive potential for application as nutritional supplements

Marine macroalgae have a very high carbohydrate content due to complex algal polysaccharides (APS) like agar, alginate, and ulvan in their cell wall. Despite numerous reports on their biomedical properties, their hydrocolloid nature limits their applications. Algal oligosaccharides (AOS), which are hydrolyzed forms of complex APS, are gaining importance due to their low molecular weight, biocompatibility, bioactivities, safety, and solubility in water that makes it a lucrative alternative. The AOS produced through enzymatic hydrolysis using microbial enzymes have far-reaching applications because of its stereospecific nature. Identification and characterization of novel microorganisms producing APS hydrolyzing enzymes are the major bottlenecks for the efficient production of AOS. This review will discuss the marine microbial enzymes identified for AOS production and the bioactive potential of enzymatically produced AOS. This can improve our understanding of the biotechnological potential of microbial enzymes for the production of AOS and facilitate the sustainable utilization of algal biomass. Enzymatically produced AOS are shown to have bioactivities such as antioxidant, antiglycemic, prebiotic, immunomodulation, antiobesity or antihypercholesterolemia, anti-inflammatory, anticancer, and antimicrobial activity. The myriad of health benefits provided by the AOS is the need of the hour as there is an alarming increase in physiological disorders among a wide range of the global population.

Comparison of Biochemical Characteristics, Action Models, and Enzymatic Mechanisms of a Novel Exolytic and Two Endolytic Lyases with Mannuronate Preference

Recent explorations of tool-like alginate lyases have been focused on their oligosaccharide-yielding properties and corresponding mechanisms, whereas most were reported as endo-type with α-L-guluronate (G) preference. Less is known about the β-D-mannuronate (M) preference, whose commercial production and enzyme application is limited. In this study, we elucidated Aly6 of Flammeovirga sp. strain MY04 as a novel M-preferred exolytic bifunctional lyase and compared it with AlgLs of Pseudomonas aeruginosa (Pae-AlgL) and Azotobacter vinelandii (Avi-AlgL), two typical M-specific endolytic lyases. This study demonstrated that the AlgL and heparinase_II_III modules play indispensable roles in determining the characteristics of the recombinant exo-type enzyme rAly6, which is preferred to degrade M-enriched substrates by continuously cleaving various monosaccharide units from the nonreducing end, thus yielding various size-defined ΔG-terminated oligosaccharides as intermediate products. By contrast, the endolytic enzymes Pae-rAlgL and Avi-rAlgL varied their action modes specifically against M-enriched substrates and finally degraded associated substrate chains into various size-defined oligosaccharides with a succession rule, changing from ΔM to ΔG-terminus when the product size increased. Furthermore, site-directed mutations and further protein structure tests indicated that H¹⁹⁵NHSTW is an active, half-conserved, and essential enzyme motif. This study provided new insights into M-preferring lyases for novel resource discoveries, oligosaccharide preparations, and sequence determinations.

Structure Characteristics, Biochemical Properties, and Pharmaceutical Applications of Alginate Lyases

Alginate, the most abundant polysaccharides of brown algae, consists of various proportions of uronic acid epimers α-L-guluronic acid (G) and β-D-mannuronic acid (M). Alginate oligosaccharides (AOs), the degradation products of alginates, exhibit excellent bioactivities and a great potential for broad applications in pharmaceutical fields. Alginate lyases can degrade alginate to functional AOs with unsaturated bonds or monosaccharides, which can facilitate the biorefinery of brown algae. On account of the increasing applications of AOs and biorefinery of brown algae, there is a scientific need to explore the important aspects of alginate lyase, such as catalytic mechanism, structure, and property. This review covers fundamental aspects and recent developments in basic information, structural characteristics, the structure-substrate specificity or catalytic efficiency relationship, property, molecular modification, and applications. To meet the needs of biorefinery systems of a broad array of biochemical products, alginate lyases with special properties, such as salt-activated, wide pH adaptation range, and cold adaptation are outlined. Withal, various challenges in alginate lyase research are traced out, and future directions, specifically on the molecular biology part of alginate lyases, are delineated to further widen the horizon of these exceptional alginate lyases.

Microbial Regulation of Deterioration and Preservation of Salted Kelp under Different Temperature and Salinity Conditions

High salinity is an effective measure to preserve kelp, but salted kelp can still deteriorate after long-term preservation. In order to clarify the key conditions and microbial behavior of salted kelp preservation, 10% (S10), 20% (S20), and 30% (S30) salt concentrations were evaluated at 25 °C (T25) and 4 °C (T4). After 30 days storage, these salted kelps showed different states including rot (T25S10), softening (T25S20), and undamaged (other samples). By detecting polysaccharide lyase activity and performing high-throughput sequencing of the prokaryotic 16S rRNA sequence and metagenome, we found that deteriorated kelps (T25S10 and T25S20) had significantly higher alginate lyase activity and bacterial relative abundance than other undamaged samples. Dyella, Saccharophagus, Halomonas, Aromatoleum, Ulvibacter, Rhodopirellula, and Microbulbifer were annotated with genes encoding endonuclease-type alginate lyases, while Bacillus and Thiobacillus were annotated as the exonuclease type. Additionally, no alginate lyase activity was detected in undamaged kelps, whose dominant microorganisms were halophilic archaea without alginate lyase-encoding genes. These results indicated that room-temperature storage may promote salted kelp deterioration due to the secretion of bacterial alginate lyase, while ultra-high-salinity and low-temperature storage can inhibit bacterial alginate lyase and promote the growth of halophilic archaea without alginate lyase, thus achieving the preservation of salted kelp.

Alginate derived functional oligosaccharides: Recent developments, barriers, and future outlooks

Alginate is a biopolymer used extensively in the food, pharmaceutical, and chemical industries. Alginate oligosaccharides (AOS) derived from alginate exhibit superior biological activities and therapeutic potential. Alginate lyases with characteristic substrate specificity can facilitate the production of a broad array of AOS with precise structure and functionality. By adopting innovative analytical tools in conjunction with focused clinical studies, the structure-bioactivity relationship of a number of AOS has been brought to light. This review covers fundamental aspects and recent developments in AOS research. Enzymatic and microbial processes involved in AOS production from brown algae and sequential steps involved in AOS structure elucidation are outlined. Biological mechanisms underlying the health benefits of AOS and their potential industrial and therapeutic applications are elaborated. Withal, various challenges in AOS research are traced out, and future directions, specifically on recombinant systems for AOS preparation, are delineated to further widen the horizon of these exceptional oligosaccharides.

Structural basis for the exolytic activity of polysaccharide lyase family 6 alginate lyase BcAlyPL6 from human gut microbe Bacteroides clarus

Alginate is the structural polysaccharide of the cell wall of brown algae, which is an important carbon source for marine life. The depolymerization of alginate is dependent on alginate lyases. Recent studies showed that the alginate utilization ability had been obtained by human gut microbes. In contrast to the great number of studies on alginate lyases from marine/soil organisms, studies on alginate lyases from gut microbes are still limited. Here, the structure of a polysaccharide lyase family 6 (PL6) alginate lyase from human gut microbe Bacteroides clarus was solved by X-ray crystallography, which represents the cluster of two-domain PL6 alginate lyases from Bacteroidetes. Similar with the two-domain alginate lyase AlyGC originated from marine bacterium, both the N terminal domain (NTD) and C terminal domain (CTD) of BcAlyPL6 show right-handed parallel β-helix fold. However, unlike AlyGC, which forms a homodimer, BcAlyPL6 functions as a monomer. Biochemical analysis indicates that the substrate binding affinity is mainly contributed by the NTD while the CTD of BcAlyPL6 is involved in the formation of -1 subsite, which is essential for substrate turnover rate. Furthermore, CTD is involved in shaping a closed catalytic pocket, and deletion of it leads to increased activity towards highly polymerized substrate. Structure comparison of PL6 family alginate lyases implies that the linkers of two-domain alginate lyases might have evolutionary relationship with the N/C terminal extension of single-domain lyases.

Structural insights into the substrate-binding cleft of AlyF reveal the first long-chain alginate-binding mode

The products of alginate degradation, alginate oligosaccharides (AOS), have potential applications in many areas, including functional foods and marine drugs. Enzyme-based approaches using alginate lyases have advantages in the preparation of well defined AOS and have attracted much attention in recent years. However, a lack of structural insight into the whole substrate-binding cleft for most known alginate lyases severely hampers their application in the industrial generation of well defined AOS. To solve this issue, AlyF was co-crystallized with the long alginate oligosaccharide G6 (L-hexaguluronic acid hexasodium salt), which is the longest bound substrate in all solved alginate lyase complex structures. AlyF formed interactions with G6 from subsites -3 to +3 without additional substrate-binding site interactions, suggesting that the substrate-binding cleft of AlyF was fully occupied by six sugars, which was further confirmed by isothermal titration calorimetry and differential scanning calorimetry analyses. More importantly, a combination of structural comparisons and mutagenetic analyses determined that three key loops (loop 1, Lys215-Glu236; loop 2, Gln402-Ile416; loop 3, Arg334-Gly348) mainly function in binding long substrates (degree of polymerization of >4). The potential flexibility of loop 1 and loop 2 might enable the substrate to continue to enter the cleft after binding to subsites +1 to +3; loop 3 stabilizes and orients the substrate at subsites -2 and -3. Taken together, these results provide the first possible alginate lyase-substrate binding profile for long-chain alginates, facilitating the rational design of new enzymes for industrial purposes.

Single-Point Mutation Near Active Center Increases Substrate Affinity of Alginate Lyase AlgL-CD

Alginate lyases have been widely used for the preparation of bioactive alginate oligosaccharides. An alginate lyase AlgL-CD was rationally designed by introducing alkaline amino acid residues near active center to increase activity. One of its mutants E226K presented much higher activity than wild-type AlgL-CD. Substrate affinity of E226K increased 10 folds as the K_m values indicated. The spectra of intrinsic emission fluorescence and circular dichroism of E226K suggested the whole enzyme turned to be more flexible. The 8-anilino-1-naphthalenesulfonate (ANS)-binding assay showed that the hydrophobic active center of E226K was more available to ligand. Molecular dynamic analysis of the enzyme-substrate complex showed that lid loops of the active center in E226K turned to be more opened up, which might contribute to the increase of substrate-binding affinity. Meanwhile, the catalytic residue of E226K was closer to the hydrogen donor C5 atom of the substrate to increase catalysis rate. The final degradation products of alginate by E226K were determined to be identical with that of AlgL-CD. This study provides guidance for improving enzymatic preparation efficiency of bioactive alginate oligosaccharides.

Characteristics and applications of alginate lyases: A review

Brown algae, as the main source of alginate, are a type of marine biomass with a very high output. Alginate, a polysaccharide composed of β-D-mannuronic acid (M) and α-L-guluronic acid (G), has great potential for applications in the food, cosmetic and pharmaceutical industries. Alginate lyases (Alys) can degrade alginate polymers into oligosaccharides or monosaccharides, resulting in a broad application field. Alys can be used for both the production of alginate oligosaccharides and the biorefinery of brown algae. In view of their important functions, an increasing number of Alys have been isolated and characterized. For better application, a comprehensive understanding of Alys is essential. Therefore, in this paper, we summarized recently discovered Alys, discussed their characteristics, and introduced their structural properties, degradation patterns and biological roles in alginate-degrading organisms. In addition, applications of Alys have been illustrated with examples. This paper provides a relatively comprehensive description of Alys, which is significant for Alys exploration and application.

Expression and Characterization of an Alginate Lyase and Its Thermostable Mutant in Pichia pastoris

Alginate is one of the most abundant polysaccharides in algae. Alginate lyase degrades alginate through a β-elimination mechanism to produce alginate oligosaccharides with special bioactivities. Improving enzyme activity and thermal stability can promote the application of alginate lyase in the industrial preparation of alginate oligosaccharides. In this study, the recombinant alginate lyase cAlyM and its thermostable mutant 102C300C were expressed and characterized in Pichia pastoris. The specific activities of cAlyM and 102C300C were 277.1 U/mg and 249.6 U/mg, respectively. Both enzymes showed maximal activity at 50 °C and pH 8.0 and polyG preference. The half-life values of 102C300C at 45 °C and 50 °C were 2.6 times and 11.7 times the values of cAlyM, respectively. The degradation products of 102C300C with a lower degree of polymerization contained more guluronate. The oligosaccharides with a polymerization degree of 2–4 were the final hydrolytic products. Therefore, 102C300C is potentially valuable in the production of alginate oligosaccharides with specific M/G ratio and molecular weights.

Characterization of different alginate lyases for dissolving Pseudomonas aeruginosa biofilms

Aggregates of Pseudomonas aeruginosa form a protective barrier against antibiotics and the immune system. These barriers, known as biofilms, are associated with several infectious diseases. One of the main components of these biofilms is alginate, a homo- and hetero-polysaccharide that consists of β-D-mannuronate (M) and α-L-guluronate (G) units. Alginate lyases degrade this sugar and have been proposed as biotherapeutic agents to dissolve P. aeruginosa biofilms. However, there are contradictory reports in the literature regarding the efficacy of alginate lyases against biofilms and their synergistic effect with antibiotics. We found that most positive reports used a commercial crude extract from Flavobacterium multivorum as the alginate lyase source. By using anion exchange chromatography coupled to nano LC MS/MS, we identified two distinct enzymes in this extract, one has both polyM and polyG (polyM/G) degradation activities and it is similar in sequence to a broad-spectrum alginate lyase from Flavobacterium sp. S20 (Alg2A). The other enzyme has only polyG activity and it is similar in sequence to AlyA1 from Zobellia galactanivorans. By characterizing both of these enzymes together with three recombinant alginate lyases (a polyM, a polyG and a polyM/G), we showed that only enzymes with polyM/G activity such as Alg2A and A1-II' (alginate lyase from Sphingomonas sp.) are effective in dissolving biofilms. Furthermore, both activities are required to have a synergistic effect with antibiotics.

Production of a novel dimeric 4-deoxy-L-erythro-5-hexoseulose uronic acid by a PL-17 exolytic alginate lyase from Hydrogenophaga sp. UMI-18

Hydrogenopahaga sp. strain UMI-18 is an alginolytic bacterium that can produce poly(3-hydroxybutylate) (PHB) using alginate as its sole carbon source. Genome analysis indicated that this strain harbors both PHB-synthesizing and alginate-assimilating gene clusters. In the present study, we cloned HyAly-I gene that encodes a PL-17 exolytic alginate lyase and investigated its enzymatic properties using recombinant HyAly-I (recHyAly-I) that was produced by Escherichia coli. The recHyAly-I preferably depolymerized poly(β-D-mannuronate) block of alginate in an exolytic manner at an optimal temperature and a pH at 40 °C and pH 6.0, respectively. It released 4-deoxy-L-erythro-5-hexoseulose uronic acid (DEH) from the non-reducing terminus of polymer and oligomer substrates. Interestingly, recHyAly-I was found to produce a novel unsaturated disaccharide, i.e., dimeric DEH (diDEH), along with monomeric DEH. Production of diDEH was prominent in the degradation of trisaccharides.

Biochemical characterization and degradation pattern analysis of a novel PL-6 alginate lyase from Streptomyces coelicolor A3(2)

Alginate is the main component of brown algae which contributes to a huge biomass. The alginate oligosaccharides (AOs) have been widely used in food, cosmetic and pharmaceutical industries due to their various physiological activities. In this study, we expressed and characterized a novel PL-6 alginate lyase, named OUC-ScCD6. The results indicated that OUC-ScCD6 showed highest activity at 50 °C and pH 9.0. OUC-ScCD6 prefers to degrade poly M blocks and could digest poly G blocks as well. Endolytic action mode towards polysaccharides contributes to the creation of AOs with the degrees of polymerization 2-6. Degradation towards saturated oligosaccharides showed that saturated trisaccharides (M3 and G3) were minimum identifiable substrates. Furthermore, OUC-ScCD6 shows an even-numbered glycosidic bonds preference from non-reducing end which provided clearer insights into the substrate recognition and action mode of PL-6 family alginate lyases.

Characterization of a bifunctional alginate lyase as a new member of the polysaccharide lyase family 17 from a marine strain BP-2

OBJECTIVES

Bifunctional alginate lyase can efficiently saccharify alginate biomass and prepare functional oligosaccharides of alginate.

RESULTS

A new BP-2 strain that produces alginate lyase was screened and identified from rotted Sargassum. A new alginate lyase, Alg17B, belonging to the polysaccharide lyase family 17, was isolated and purified from BP-2 fermentation broth by freeze-drying, dialysis, and ion exchange chromatography. The enzymatic properties of the purified lyase were investigated. The molecular weight of Alg17B was approximately 77 kDa, its optimum reaction temperature was 40-45 °C, and its optimum reaction pH was 7.5-8.0. The enzyme was relatively stable at pH 7.0-8.0, with a temperature range of 25-35 °C, and the specific activity of the purified enzyme reached 4036 U/mg. A low Na+ concentration stimulated Alg17B enzyme activity, but Ca2+, Zn2+, and other metal ions inhibited it. Substrate specificity analysis, thin-layer chromatography, and mass spectrometry showed that Alg17B is an alginate lyase that catalyses the hydrolysis of sodium alginate, polymannuronic acid (polyM) and polyguluronic acid to produce monosaccharides and low molecular weight oligosaccharides. Alg17B is also bifunctional, exhibiting both endolytic and exolytic activities toward alginate, and has a wide substrate utilization range with a preference for polyM.

CONCLUSIONS

Alg17B can be used to saccharify the main carbohydrate, alginate, in the ethanolic production of brown algae fuel as well as in preparing and researching oligosaccharides.

The Characterization and Modification of a Novel Bifunctional and Robust Alginate Lyase Derived from Marinimicrobium sp. H1

Alginase lyase is an important enzyme for the preparation of alginate oligosaccharides (AOS), that possess special biological activities and is widely used in various fields, such as medicine, food, and chemical industry. In this study, a novel bifunctional alginate lyase (AlgH) belonging to the PL7 family was screened and characterized. The AlgH exhibited the highest activity at 45 °C and pH 10.0, and was an alkaline enzyme that was stable at pH 6.0–10.0. The enzyme showed no significant dependence on metal ions, and exhibited unchanged activity at high concentration of NaCl. To determine the function of non-catalytic domains in the multi-domain enzyme, the recombinant AlgH-I containing only the catalysis domain and AlgH-II containing the catalysis domain and the carbohydrate binding module (CBM) domain were constructed and characterized. The results showed that the activity and thermostability of the reconstructed enzymes were significantly improved by deletion of the F5/8 type C domain. On the other hand, the substrate specificity and the mode of action of the reconstructed enzymes showed no change. Alginate could be completely degraded by the full-length and modified enzymes, and the main end-products were alginate disaccharide, trisaccharide, and tetrasaccharide. Due to the thermo and pH-stability, salt-tolerance, and bifunctionality, the modified alginate lyase was a robust enzyme which could be applied in industrial production of AOS.

Structural and functional aspects of mannuronic acid-specific PL6 alginate lyase from the human gut microbe Bacteroides cellulosilyticus

Alginate is a linear polysaccharide from brown algae consisting of 1,4-linked β-d-mannuronic acid (M) and α-l-guluronic acid (G) arranged in M, G, and mixed MG blocks. Alginate was assumed to be indigestible in humans, but bacteria isolated from fecal samples can utilize alginate. Moreover, genomes of some human gut microbiome-associated bacteria encode putative alginate-degrading enzymes. Here, we genome-mined a polysaccharide lyase family 6 alginate lyase from the gut bacterium Bacteroides cellulosilyticus (BcelPL6). The structure of recombinant BcelPL6 was solved by X-ray crystallography to 1.3 Å resolution, revealing a single-domain, monomeric parallel β-helix containing a 10-step asparagine ladder characteristic of alginate-converting parallel β-helix enzymes. Substitutions of the conserved catalytic site residues Lys-249, Arg-270, and His-271 resulted in activity loss. However, imidazole restored the activity of BcelPL6-H271N to 2.5% that of the native enzyme. Molecular docking oriented tetra-mannuronic acid for syn attack correlated with M specificity. Using biochemical analyses, we found that BcelPL6 initially releases unsaturated oligosaccharides of a degree of polymerization of 2-7 from alginate and polyM, which were further degraded to di- and trisaccharides. Unlike other PL6 members, BcelPL6 had low activity on polyMG and none on polyG. Surprisingly, polyG increased BcelPL6 activity on alginate 7-fold. LC-electrospray ionization-MS quantification of products and lack of activity on NaBH₄-reduced octa-mannuronic acid indicated that BcelPL6 is an endolyase that further degrades the oligosaccharide products with an intact reducing end. We anticipate that our results advance predictions of the specificity and mode of action of PL6 enzymes.

Biochemical characteristics and synergistic effect of two novel alginate lyases from Photobacterium sp. FC615

BACKGROUND

Macroalgae and microalgae, as feedstocks for third-generation biofuel, possess competitive strengths in terms of cost, technology and economics. The most important compound in brown macroalgae is alginate, and the synergistic effect of endolytic and exolytic alginate lyases plays a crucial role in the saccharification process of transforming alginate into biofuel. However, there are few studies on the synergistic effect of endolytic and exolytic alginate lyases, especially those from the same bacterial strain.

RESULTS

In this study, the endolytic alginate lyase AlyPB1 and exolytic alginate lyase AlyPB2 were identified from the marine bacterium Photobacterium sp. FC615. These two enzymes showed quite different and novel enzymatic properties whereas behaved a strong synergistic effect on the saccharification of alginate. Compared to that when AlyPB2 was used alone, the conversion rate of alginate polysaccharides to unsaturated monosaccharides when AlyPB1 and AlyPB2 acted on alginate together was dramatically increased approximately sevenfold. Furthermore, we found that AlyPB1 and AlyPB2 acted the synergistic effect basing on the complementarity of their substrate degradation patterns, particularly due to their M-/G-preference and substrate-size dependence. In addition, a novel method for sequencing alginate oligosaccharides was developed for the first time by combining the ¹H NMR spectroscopy and the enzymatic digestion with the exo-lyase AlyPB2, and this method is much simpler than traditional methods based on one- and two-dimensional NMR spectroscopy. Using this strategy, the sequences of the final tetrasaccharide and pentasaccharide product fractions produced by AlyPB1 were easily determined: the tetrasaccharide fractions contained two structures, ΔGMM and ΔMMM, at a molar ratio of 1:3.2, and the pentasaccharide fractions contained four structures, ΔMMMM, ΔMGMM, ΔGMMM, and ΔGGMM, at a molar ratio of ~ 1:1.5:3.5:5.25.

CONCLUSIONS

The identification of these two novel alginate lyases provides not only excellent candidate tool-type enzymes for oligosaccharide preparation but also a good model for studying the synergistic digestion and saccharification of alginate in biofuel production. The novel method for oligosaccharide sequencing described in this study will offer a very useful approach for structural and functional studies on alginate.

Identification of 4-Deoxy-L-Etychro-Hexoseulose Uronic Acid Reductases in an Alginolytic Bacterium Vibrio splendidus and their Uses for L-Lactate Production in an Escherichia coli Cell-Free System

4-Deoxy-L-erythro-hexoseulose uronic acid (DEH) reductase is a key enzyme in alginate utilizing metabolism, but the number of characterized DEH reductase is quite limited. In this study, novel two DEH reductases, VsRed-1 and VsRed-2, were identified in marine bacterium Vibrio splendidus, and the recombinant enzymes were expressed in an Escherichia coli system and purified by Ni-NTA chromatography. The optimal pH and temperature of the recombinant VsRed-1 and VsRed-2 were pH 7.5, 30 °C, and pH 7.0, 35 °C, respectively. The specific activities of VsRed-1 (776 U/mg for NADH) and VsRed-2 (176 U/mg for NADPH) were the highest among the DEH reductases reported so far. We also demonstrated that DEH could be converted to L-lactate with a yield of 76.7 and 81.9% in E. coli cell-free system containing VsRed-1 and VsRed-2 enzymes, respectively, indicating that two DEH reductases can be employed for production of biofuels and bio-chemicals from brown macroalgae biomass.

High-Level Expression of a Thermally Stable Alginate Lyase Using Pichia pastoris, Characterization and Application in Producing Brown Alginate Oligosaccharide

An alginate lyase encoding gene sagl from Flavobacterium sp. H63 was codon optimized and recombinantly expressed at high level in P.pastoris through high cell-density fermentation. The highest yield of recombinant enzyme of sagl (rSAGL) in yeast culture supernatant reached 226.4 μg/mL (915.5 U/mL). This was the highest yield record of recombinant expression of alginate lyase so far. The rSAGL was confirmed as a partially glycosylated protein through EndoH digestion. The optimal reaction temperature and pH of this enzyme were 45 °C and 7.5; 80 mM K⁺ ions could improve the catalytic activity of the enzyme by 244% at most. rSAGL was a thermal stable enzyme with T50¹⁵ of 57⁻58 °C and T50³⁰ of 53⁻54 °C. Its thermal stability was better than any known alginate lyase. In 100 mM phosphate buffer of pH 6.0, rSAGL could retain 98.8% of the initial activity after incubation at 50 °C for 2 h. Furthermore, it could retain 61.6% of the initial activity after 48 h. The specific activity of the purified rSAGL produced by P. pastoris attained 4044 U/mg protein, which was the second highest record of alginate lyase so far. When the crude enzyme of the rSAGL was directly used in transformation of sodium alginate with 40 g/L, 97.2% of the substrate was transformed to di, tri, tetra brown alginate oligosaccharide after 32 h of incubation at 50 °C, and the final concentration of reducing sugar in mixture reached 9.51 g/L. This is the first report of high-level expression of thermally stable alginate lyase using P. pastoris system.

AlgM4: A New Salt-Activated Alginate Lyase of the PL7 Family with Endolytic Activity

Alginate lyases are a group of enzymes that catalyze the depolymerization of alginates into oligosaccharides or monosaccharides. These enzymes have been widely used for a variety of purposes, such as producing bioactive oligosaccharides, controlling the rheological properties of polysaccharides, and performing structural analyses of polysaccharides. The algM4 gene of the marine bacterium Vibrio weizhoudaoensis M0101 encodes an alginate lyase that belongs to the polysaccharide lyase family 7 (PL7). In this study, the kinetic constants V_max (maximum reaction rate) and K_m (Michaelis constant) of AlgM4 activity were determined as 2.75 nmol/s and 2.72 mg/mL, respectively. The optimum temperature for AlgM4 activity was 30 °C, and at 70 °C, AlgM4 activity dropped to 11% of the maximum observed activity. The optimum pH for AlgM4 activity was 8.5, and AlgM4 was completely inactive at pH 11. The addition of 1 mol/L NaCl resulted in a more than sevenfold increase in the relative activity of AlgM4. The secondary structure of AlgM4 was altered in the presence of NaCl, which caused the α-helical content to decrease from 12.4 to 10.8% and the β-sheet content to decrease by 1.7%. In addition, NaCl enhanced the thermal stability of AlgM4 and increased the midpoint of thermal denaturation (Tm) by 4.9 °C. AlgM4 exhibited an ability to degrade sodium alginate, poly-mannuronic acid (polyM), and poly-guluronic acid (polyG), resulting in the production of oligosaccharides with a degree of polymerization (DP) of 2–9. AlgM4 possessed broader substrate, indicating that it is a bifunctional alginate lyase. Thus, AlgM4 is a novel salt-activated and bifunctional alginate lyase of the PL7 family with endolytic activity.

Purification and Characterization of a Novel Alginate Lyase from the Marine Bacterium Bacillus sp. Alg07

Alginate oligosaccharides with different bioactivities can be prepared through the specific degradation of alginate by alginate lyases. Therefore, alginate lyases that can be used to degrade alginate under mild conditions have recently attracted public attention. Although various types of alginate lyases have been discovered and characterized, few can be used in industrial production. In this study, AlgA, a novel alginate lyase with high specific activity, was purified from the marine bacterium Bacillus sp. Alg07. AlgA had a molecular weight of approximately 60 kDa, an optimal temperature of 40 °C, and an optimal pH of 7.5. The activity of AlgA was dependent on sodium chloride and could be considerably enhanced by Mg²⁺ or Ca²⁺. Under optimal conditions, the activity of AlgA reached up to 8306.7 U/mg, which is the highest activity recorded for alginate lyases. Moreover, the enzyme was stable over a broad pH range (5.0–10.0), and its activity negligibly changed after 24 h of incubation at 40 °C. AlgA exhibited high activity and affinity toward poly-β-d-mannuronate (polyM). These characteristics suggested that AlgA is an endolytic polyM-specific alginate lyase (EC 4.2.2.3). The products of alginate and polyM degradation by AlgA were purified and identified through fast protein liquid chromatography and electrospray ionization mass spectrometry, which revealed that AlgA mainly produced disaccharides, trisaccharides, and tetrasaccharide from alginate and disaccharides and trisaccharides from polyM. Therefore, the novel lysate AlgA has potential applications in the production of mannuronic oligosaccharides and poly-α-l-guluronate blocks from alginate.

Diversity of Three-Dimensional Structures and Catalytic Mechanisms of Alginate Lyases

Alginate is a linear polysaccharide produced mainly by brown algae in marine environments. Alginate consists of a linear block copolymer made up of two monomeric units, β-d-mannuronate (M) and its C-5 epimer α-l-guluronate (G). Alginate lyases are polysaccharide lyases (PL) that degrade alginate via a β-elimination reaction. These enzymes play an important role in marine carbon recycling and also have widespread industrial applications. So far, more than 1,774 alginate lyase sequences have been identified and are distributed into 7 PL families. In this review, the folds, conformational changes during catalysis, and catalytic mechanisms of alginate lyases are described. Thus far, structures for 15 alginate lyases have been solved and are divided into 3 fold classes: the β-jelly roll class (PL7, -14, and -18), the (α/α)n toroid class (PL5, -15, and -17), and the β-helix fold (PL6). These enzymes adopt two different mechanisms for catalysis, and three kinds of conformational changes occur during this process. Moreover, common features in the structures, conformational changes, and catalytic mechanisms are summarized, providing a comprehensive understanding on alginate lyases.

Printing-induced cell injury evaluation during laser printing of 3T3 mouse fibroblasts

Three-dimensional bioprinting has emerged as a promising solution for the freeform fabrication of living cellular constructs, which can be used for tissue/organ transplantation and tissue models. During bioprinting, some living cells are unavoidably injured and may become necrotic or apoptotic cells. This study aims to investigate the printing-induced cell injury and evaluates injury types of post-printing cells using the annexin V/7-aminoactinomycin D and FAM-DEVD-FMK/propidium iodide assays during laser printing of NIH 3T3 mouse fibroblasts. As observed, the percentage of post-printing early apoptotic mouse fibroblasts increases with the incubation time, indicating that post-printing apoptotic mouse fibroblasts have different initiation lag times of apoptosis due to different levels of mechanical stress exerted during laser printing. Post-printing necrotic mouse fibroblasts can be detected immediately after printing, while post-printing early apoptotic mouse fibroblasts need time to develop into a late apoptotic stage. The minimum time needed for post-printing early apoptotic mouse fibroblasts to complete their apoptosis pathway and transition into late apoptotic mouse fibroblasts is from 4 h to 5 h post-printing. The resulting knowledge of the evolution of different apoptotic post-printing mouse fibroblasts will help better design future experiments to quantitatively determine, model, and mitigate the post-printing cell injury based on molecular signal pathway modeling.

Effects of living cells on the bioink printability during laser printing

Laser-induced forward transfer has been a promising orifice-free bioprinting technique for the direct writing of three-dimensional cellular constructs from cell-laden bioinks. In order to optimize the printing performance, the effects of living cells on the bioink printability must be carefully investigated in terms of the ability to generate well-defined jets during the jet/droplet formation process as well as well-defined printed droplets on a receiving substrate during the jet/droplet deposition process. In this study, a time-resolved imaging approach has been implemented to study the jet/droplet formation and deposition processes when printing cell-free and cell-laden bioinks under different laser fluences. It is found that the jetting behavior changes from no material transferring to well-defined jetting with or without an initial bulgy shape to jetting with a bulgy shape/pluming/splashing as the laser fluence increases. Under desirable well-defined jetting, two impingement-based deposition and printing types are identified: droplet-impingement printing and jet-impingement printing with multiple breakups. Compared with cell-free bioink printing, the transfer threshold of the cell-laden bioink is higher while the jet velocity, jet breakup length, and printed droplet size are lower, shorter, and smaller, respectively. The addition of living cells transforms the printing type from jet-impingement printing with multiple breakups to droplet-impingement printing. During the printing of cell-laden bioinks, two non-ideal jetting behaviors, a non-straight jet with a non-straight trajectory and a straight jet with a non-straight trajectory, are identified mainly due to the local nonuniformity and nonhomogeneity of cell-laden bioinks.

Novel Molecular Insights into the Catalytic Mechanism of Marine Bacterial Alginate Lyase AlyGC from Polysaccharide Lyase Family 6

Alginate lyases that degrade alginate via a β-elimination reaction fall into seven polysaccharide lyase (PL) families. Although the structures and catalytic mechanisms of alginate lyases in the other PL families have been clarified, those in family PL6 have yet to be revealed. Here, the crystal structure of AlyGC, a PL6 alginate lyase from marine bacterium Glaciecola chathamensis S18K6^T, was solved, and its catalytic mechanism was illustrated. AlyGC is a homodimeric enzyme and adopts a structure distinct from other alginate lyases. Each monomer contains a catalytic N-terminal domain and a functionally unknown C-terminal domain. A combined structural and mutational analysis using the structures of AlyGC and of an inactive mutant R241A in complex with an alginate tetrasaccharide indicates that conformational changes occur in AlyGC when a substrate is bound and that the two active centers in AlyGC may not bind substrates simultaneously. The C-terminal domain is shown to be essential for the dimerization and the catalytic activity of AlyGC. Residues Tyr¹³⁰, Arg¹⁸⁷, His²⁴², Arg²⁶⁵, and Tyr³⁰⁴ in the active center are also important for the activity of AlyGC. In catalysis, Lys²²⁰ and Arg²⁴¹ function as the Brønsted base and acid, respectively, and a Ca²⁺ in the active center neutralizes the negative charge of the C5 carboxyl group of the substrate. Finally, based on our data, we propose a metal ion-assisted catalytic mechanism of AlyGC for alginate cleavage with a state change mode, which provides a better understanding for polysaccharide lyases and alginate degradation.

Screening of Alginate Lyase-Producing Bacteria and Optimization of Media Compositions for Extracellular Alginate Lyase Production

Background:

Alginate is a linear polysaccharide consisting of guluronate (polyG) and mannuronate (polyM) subunits.

Methods:

In the initial screening of alginate-degrading bacteria from soil, 10 isolates were able to grow on minimal medium containing alginate. The optimization of cell growth and alginate lyase (algL) production was carried out by the addition of 0.8% alginate and 0.2-0.3 M NaCl to the culture medium. Of 10 isolates, one was selected based on its fast growth rate on minimal 9 medium containing 0.4% sodium alginate. The selected bacterium, identified based on morphological and biochemical characteristics, as well as 16S rDNA sequence data, was confirmed to be an isolate belonging to the genus Bacillus and designated as Bacillus sp. TAG8.

Results:

The results showed the ability of Bacillus sp. TAG8 in utilizing alginate as a sole carbon source. Bacillus sp. TAG8 growth and algL production were augmented with an increase in sodium alginate concentration and also by the addition of 0.2-0.3 M NaCl. Molecular analysis of TAG8 algL gene showed 99% sequence identity with algL of Pseudomonasaeruginosa PAO1. The algL produced by Bacillus sp. TAG8 cleaved both polyM and polyG blocks in alginate molecule, as well as acetylated alginate residues, confirming the bifunctionality of the isolated lyase.

Conclusion:

The identification of novel algL genes from microbial communities constitutes a new approach for exploring lyases with specific activity against bacterial alginates and may thus contribute to the eradication of persistent biofilms from clinical samples.