Which properties of cutinases are important for applications?

Exploring biodegradable alternatives: microorganism-mediated plastic degradation and environmental policies for sustainable plastic management

Plastics offer versatility, durability and low production costs, but they also pose environmental and health risks due to improper disposal, accumulation in water bodies, low recycling rates and temporal action that causes physicochemical changes in plastics and the release of toxic products to animal health and nature. Some microorganisms may play crucial roles in improving plastic waste management in the future. Cunningamella echinulata has been identified as a promising candidate that remains viable for long periods and produces a cutinase that is capable of degrading plastic. Other recent approaches involving the use of microorganisms are discussed in this review. However, there does not seem to be a single science that is efficient or most appropriate for solving the problem of plastic pollution on the planet at present. Regulations, especially the implementation of different laws that address the entire plastic cycle in different countries, such as Brazil, the USA, China and the European Union, play important roles in the management of this waste and can contribute to reducing this problem. In the context of the transversality of the information compiled here, the current limitations are discussed, and an effective plan is proposed to reduce plastic pollution. Although it is challenging, it involves implementing legislation, promoting sustainable alternatives, improving collection and recycling systems, encouraging reuse, supporting research and technological innovation, promoting corporate responsibility, collaborating globally, raising public awareness, optimizing waste management and, above all, continuously monitoring the progress of actions based on measurable metrics.

The evolution of cutinase Est1 based on the clustering strategy and its application for commercial PET bottles degradation

The rapid increase in global plastic consumption, especially the worldwide use of polyethylene terephthalate (PET), has caused serious pollution problems. Due to the low recycling rate of PET, a substantial amount of waste accumulates in the environment, which prompts a growing focus on enzymatic degradation for its efficiency and environmentally friendliness. This study systematically designed and modified a cutinase, Est1 from Thermobifida alba AHK119, known for its potential of plastic-degradation at high temperatures. Additionally, the introduction of clustering algorithms provided the ability to understand and modify biomolecules, to accelerate the process of finding the optimal mutations. K-means was further proceeded based on the positive mutations. After comprehensive screening for thermostability and activity mutation sites, the dominant mutation Est1_5M (Est1 with the mutations of N213M, T215P, S115P, Q93A, and L91W) exhibited satisfying degradation ability for commercial PET bottles. The results showed that Est1_5M achieved a degradation rate of 90.84% in 72 h, 65-fold higher than the wild type. This study offers reliable theoretical and practical support for the development of efficient PET-degrading enzymes, providing a reference for plastic pollution management.

Functional characterization and structural insights of three cutinases from the ascomycete Fusarium verticillioides

Cutinases are serine esterases that belong to the α/β hydrolases superfamily. The natural substrates for these enzymes are cutin and suberin, components of the plant cuticle, the first barrier in the defense system against pathogen invasion. It is well-reported that plant pathogens produce cutinases to facilitate infection. Fusarium verticillioides, one important corn pathogens, is an ascomycete upon which its cutinases are poorly explored. Consequently, the objective of this study was to perform the biochemical characterization of three precursor cutinases (FvCut1, FvCut2, and FvCut3) from F. verticillioides and to obtain structural insights about them. The cutinases were produced in Escherichia coli and purified. FvCut1, FvCut2, and FvCut3 presented optimal temperatures of 20, 40, and 35 °C, and optimal pH of 9, 7, and 8, respectively. Some chemicals stimulated the enzymatic activity. The kinetic parameters revealed that FvCut1 has higher catalytic efficiency (Kcat/Km) in the p-nitrophenyl-butyrate (p-NPB) substrate. Nevertheless, the enzymes were not able to hydrolyze polyethylene terephthalate (PET). Furthermore, the three-dimensional models of these enzymes showed structural differences among them, mainly FvCut1, which presented a narrower opening cleft to access the catalytic site. Therefore, our study contributes to exploring the diversity of fungal cutinases and their potential biotechnological applications.

Enzymatic treatment to improve permeability and quality of cherry tomatoes for production of dried products

BACKGROUND

Cherry tomatoes are nutritious and favored by consumers. Processing them into dried cherry tomatoes can prolong their storage life and improve their flavor. The pretreatment of tomato pericarp is crucial for the subsequent processing. However, the traditional physical and chemical treatments of tomato pericarp generally cause nutrient loss and environmental pollution.

RESULTS

In this study, a novel enzymatic method for cherry tomatoes was performed using mixed enzymes containing cutinase, cellulase and pectinase. Results showed that the pericarp permeability of cherry tomatoes was effectively improved due to enzymatic treatment. Changes in the microscopic structure and composition of the cuticle were revealed. After treatment with different concentrations of enzymes, cherry tomatoes exhibited higher pericarp permeability and sensory quality to varying degrees. The lycopene content and total polyphenol content significantly increased 2.4- and 1.45-fold, respectively. In addition, the satisfactory effect of the six-time reuse of enzymes on cherry tomatoes could still reach the same level as the initial effect, which effectively reduced the cost of production.

CONCLUSIONS

This study revealed for the first time that a mixed enzymatic treatment consisting of cutinase, pectinase and cellulase could effectively degrade the cuticle, enhance the pericarp permeability and improve the quality of cherry tomatoes, with the advantages of being mildly controllable and environmentally friendly, providing a new strategy for the processing of dried cherry tomatoes. © 2023 Society of Chemical Industry.

Thermal Embedding of Humicola insolens Cutinase: A Strategy for Improving Polyester Biodegradation in Seawater

By thermal embedding of the commercially available enzyme Humicola insolens cutinase (HiC), this study successfully enhanced the biodegradability of various polyesters (PBS, PBSA, PCL, PBAT) in seawater, which otherwise show limited environmental degradability. Melt extrusion above the melting temperature was used for embedding HiC in the polyesters. The overall physical properties of the HiC-embedded films remained almost unchanged compared to those of the neat films. In the buffer, embedding HiC allowed rapid polymer degradation into water-soluble hydrolysis products. Biochemical oxygen demand tests showed that the HiC-embedded polyester films exhibited similar or much higher biodegradability than the biodegradable cellulose standard in natural seawater. Thermal embedding of HiC aims to accelerate the biodegradation of plastics that are already biodegradable but have limited environmental biodegradability, potentially reducing their contribution to environmental problems such as marine microplastics.

Adaptation of yeast Saccharomyces cerevisiae to grape-skin environment

Saccharomyces cerevisiae, an essential player in alcoholic fermentation during winemaking, is rarely found in intact grapes. Although grape-skin environment is unsuitable for S. cerevisiae's stable residence, Saccharomycetaceae-family fermentative yeasts can increase population on grape berries after colonization during raisin production. Here, we addressed adaptation of S. cerevisiae to grape-skin ecosystem. The yeast-like fungus Aureobasidium pullulans, a major grape-skin resident, exhibited broad spectrum assimilation of plant-derived carbon sources, including ω-hydroxy fatty acid, arising from degradation of plant cuticles. In fact, A. pullulans encoded and secreted possible cutinase-like esterase for cuticle degradation. When intact grape berries were used as a sole carbon source, such grape-skin associated fungi increased the accessibility to fermentable sugars by degrading and assimilating the plant cell wall and cuticle compounds. Their ability seems also helpful for S. cerevisiae to obtain energy through alcoholic fermentation. Thus, degradation and utilization of grape-skin materials by resident microbiota may account for their residence on grape-skin and S. cerevisiae's possible commensal behaviors. Conclusively, this study focused on the symbiosis between grape-skin microbiota and S. cerevisiae from the perspective of winemaking origin. Such plant-microbe symbiotic interaction may be a prerequisite for triggering spontaneous food fermentation.

An Overview into Polyethylene Terephthalate (PET) Hydrolases and Efforts in Tailoring Enzymes for Improved Plastic Degradation

Plastic or microplastic pollution is a global threat affecting ecosystems, with the current generation reaching as much as 400 metric tons per/year. Soil ecosystems comprising agricultural lands act as microplastics sinks, though the impact could be unexpectedly more far-reaching. This is troubling as most plastic forms, such as polyethylene terephthalate (PET), formed from polymerized terephthalic acid (TPA) and ethylene glycol (EG) monomers, are non-biodegradable environmental pollutants. The current approach to use mechanical, thermal, and chemical-based treatments to reduce PET waste remains cost-prohibitive and could potentially produce toxic secondary pollutants. Thus, better remediation methods must be developed to deal with plastic pollutants in marine and terrestrial environments. Enzymatic treatments could be a plausible avenue to overcome plastic pollutants, given the near-ambient conditions under which enzymes function without the need for chemicals. The discovery of several PET hydrolases, along with further modification of the enzymes, has considerably aided efforts to improve their ability to degrade the ester bond of PET. Hence, this review emphasizes PET-degrading microbial hydrolases and their contribution to alleviating environmental microplastics. Information on the molecular and degradation mechanisms of PET is also highlighted in this review, which might be useful in the future rational engineering of PET-hydrolyzing enzymes.

Extracellular secretion of a cutinase with polyester-degrading potential by E. coli using a novel signal peptide from Amycolatopsis mediterranei

Recent studies in this laboratory showed that an extracellular cutinase from A. mediterranei (AmCut) was able to degrade the plastics polycaprolactone and polybutylene succinate. Such plastics can be slow to degrade in soils due to a lack of efficient polyester degrading organisms. AmCut also showed potential for the biocatalytic synthesis of esters by reverse hydrolysis. The gene for AmCut has an upstream leader sequence whose transcript is not present in the purified enzyme. In this study, we show using predictive modelling, that this sequence codes for an N-terminal signal peptide that directs transmembrane expression via the Sec secretion pathway. E. coli is a useful host for recombinant enzymes used in biocatalysis due to the ease of genetic manipulation in this organism, which allows tuning of enzymes for specific applications, by mutagenesis. When a truncated GST-tagged AmCut gene (lacking its signal peptide) was expressed in E. coli, all cutinase activity was observed in the cytosolic fraction. However, when GST-tagged AmCut was expressed in E. coli along with its native signal peptide, cutinase activity was observed in both the periplasmic space and the culture medium. This finding revealed that the native signal peptide of a Gram-positive organism (AmCut) was being recognised by the Gram-negative (E. coli) Sec transmembrane transport system. AmCut was transported into E. coli's periplasmic space from where it was released into the culture medium. Surprisingly, the presence of a bulky GST tag at the N-terminus of the signal peptide did not hinder transmembrane targeting. Although the periplasmic targeting was unexpected, it is not unprecedented due to the conservation of the Sec pathway across species. It was more surprising that AmCut was secreted from the periplasmic space into the culture medium. This suggests that extracellular AmCut translocation across the E. coli outer membrane may involve non-classical secretion pathways. This tuneable recombinant E. coli expressing extracellular AmCut may be useful for degradation of polyester substrates in the environment; this and other applications are discussed.

Structure-function analysis of two closely related cutinases from Thermobifida cellulosilytica

Cutinases can play a significant role in a biotechnology-based circular economy. However, relatively little is known about the structure-function relationship of these enzymes, knowledge that is vital to advance optimized, engineered enzyme candidates. Here, two almost identical cutinases from Thermobifida cellulosilytica DSM44535 (Thc_Cut1 and Thc_Cut2) with only 18 amino acids difference were used for a rigorous biochemical characterization of their ability to hydrolyze poly(ethylene terephthalate) (PET), PET-model substrates, and cutin-model substrates. Kinetic parameters were compared with detailed in silico docking studies of enzyme-ligand interactions. The two enzymes interacted with, and hydrolyzed PET differently, with Thc_Cut1 generating smaller PET-degradation products. Thc_Cut1 also showed higher catalytic efficiency on long-chain aliphatic substrates, an effect likely caused by small changes in the binding architecture. Thc_Cut2, in contrast, showed improved binding and catalytic efficiency when approaching the glass transition temperature of PET, an effect likely caused by longer amino acid residues in one area at the enzyme's surface. Finally, the position of the single residue Q93 close to the active site, rotated out in Thc_Cut2, influenced the ligand position of a trimeric PET-model substrate. In conclusion, we illustrate that even minor sequence differences in cutinases can affect their substrate binding, substrate specificity, and catalytic efficiency drastically.

Current Knowledge on Polyethylene Terephthalate Degradation by Genetically Modified Microorganisms

The global production of polyethylene terephthalate (PET) is estimated to reach 87.16 million metric tons by 2022. After a single use, a remarkable part of PET is accumulated in the natural environment as plastic waste. Due to high hydrophobicity and high molecular weight, PET is hardly biodegraded by wild-type microorganisms. To solve the global problem of uncontrolled pollution by PET, the degradation of plastic by genetically modified microorganisms has become a promising alternative for the plastic circular economy. In recent years many studies have been conducted to improve the microbial capacity for PET degradation. In this review, we summarize the current knowledge about metabolic engineering of microorganisms and protein engineering for increased biodegradation of PET. The focus is on mutations introduced to the enzymes of the hydrolase class-PETase, MHETase and cutinase-which in the last few years have attracted growing interest for the PET degradation processes. The modifications described in this work summarize the results obtained so far on the hydrolysis of polyethylene terephthalate based on the released degradation products of this polymer.

Adsorption of enzymes with hydrolytic activity on polyethylene terephthalate

Polyethylene terephthalate (PET) degrading enzymes have recently obtained an increasing interest as a means to decompose plastic waste. Here, we have studied the binding of three PET hydrolases on a suspended PET powder under conditions of both enzyme- and substrate excess. A Langmuir isotherm described the binding process reasonably and revealed a prominent affinity for the PET substrate, with dissociation constants consistently below 150 nM. The saturated substrate coverage approximately corresponded to a monolayer on the PET surface for all three enzymes. No distinct contributions from specific ligand binding in the active site could be identified, which points towards adsorption predominantly driven by non-specific interactions in contrast to enzymes naturally evolved for the breakdown of insoluble polymers. However, we observed a correlation between the progression of enzymatic hydrolysis and increased binding capacity, probably due to surface modifications of the PET polymer over time. Our results provide functional insight, suggesting that rational design should target the specific ligand interaction in the active site rather than the already high, general adsorption capacity of these enzymes.

Phylogenetic analysis and in-depth characterization of functionally and structurally diverse CE5 cutinases

Cutinases are esterases that release fatty acids from the apoplastic layer in plants. As they accept bulky and hydrophobic substrates, cutinases could be used in many applications, ranging from valorization of bark-rich side streams to plastic recycling. Advancement of these applications, however, requires deeper knowledge of cutinases' biodiversity and structure-function relationships. Here, we mined over 3000 members from carbohydrate esterase family 5 for putative cutinases and condensed it to 151 genes from known or putative lignocellulose-targeting organisms. The 151 genes were subjected to a phylogenetic analysis, which showed that cutinases with available crystal structures were phylogenetically closely related. We then selected nine phylogenic diverse cutinases for recombinant production and characterized their kinetic activity against para-nitrophenol substrates esterified with consecutively longer alkyl chains (pNP-C2 to C16). Each investigated cutinase had a unique activity fingerprint against the tested pNP substrates. The five enzymes with the highest activity on pNP-C12 and C16, indicative of activity on bulky hydrophobic compounds, were selected for in-depth kinetic and structure-function analysis. All five enzymes showed a decrease in kcat values with increasing substrate chain length, whereas KM values and binding energies (calculated from in silico docking analysis) improved. Two cutinases from Fusarium solani and Cryptococcus sp. exhibited outstandingly low KM values, resulting in high catalytic efficiencies toward pNP-C16. Docking analysis suggested that different clades of the phylogenetic tree may harbor enzymes with different modes of substrate interaction, involving a solvent-exposed catalytic triad, a lipase-like lid, or a clamshell-like active site possibly formed by flexible loops.

A Novel Actinobacterial Cutinase Containing a Non-Catalytic Polymer-Binding Domain

The single putative cutinase-encoding gene from the genome of Kineococcus radiotolerans SRS30216 was cloned and expressed in Escherichia coli as a secreted fusion protein, designated YebF-KrCUT, where YebF is the extracellular carrier protein. The 294-amino acid sequence of KrCUT is unique among currently characterized cutinases by having a C-terminal extension that consists of a short (Pro-Thr)-rich linker and a 55-amino-acid region resembling the substrate binding domain of poly(hydroxybutyrate) (PHB) depolymerases. Phylogenetically, KrCUT takes a unique position among known cutinases and cutinase-like proteins of bacterial and fungal origin. A modeled structure of KrCUT, although displaying a typical α/ß hydrolase fold, shows some unique loops close to the catalytic site. The 39-kDa YebF-KrCUT fusion protein and a truncated variant thereof were purified to electrophoretic homogeneity and functionally characterized. The melting temperatures (T_m) of KrCUT and its variant KrCUT206 devoid of the putative PHB-binding domain were established to be very similar at 50-51°C. Cutinase activity was confirmed by the appearance of characteristic cutin components, C₁₆ and C₁₈ hydroxyl fatty acids, in the mass chromatograms following incubation of KrCUT with apple cutin as substrate. KrCUT also efficiently degraded synthetic polyesters such as polycaprolactone and poly(1,3-propylene adipate). Although incapable of PHB depolymerization, KrCUT could efficiently bind PHB, confirming the predicted characteristic of the C-terminal region. KrCUT also potentiated the activity of pectate lyase in the degradation of pectin from hemp fibres. This synergistic effect is relevant to the enzyme retting process of natural fibres. IMPORTANCE. To date only a limited number of cutinases have been isolated and characterized from nature, the majority being sourced from phytopathogenic fungi and thermophilic bacteria. The significance of our research relates to the identification and characterization of a unique member of microbial cutinases, of name KrCUT, that was derived from the genome of the Gram-positive Kineococcus radiotolerans SRS30216, a highly radiation-resistant actinobacterium. Given the wide-ranging importance of cutinases in applications such as the degradation of natural and synthetic polymers, in the textile industry, in laundry detergents, or in biocatalysis (e.g., transesterification reactions), our results could foster new research leading to broader biotechnological impacts. This study also demonstrated that genome mining or prospecting is a viable means to discover novel biocatalysts as environmentally friendly and biotechnological tool.

Cutinases: Characteristics and Insights in Industrial Production

Cutinases (EC 3.1.1.74) are serin esterases that belong to the α/β hydrolases superfamily and present in the Ser-His-Asp catalytic triad. They show characteristics between esterases and lipases. These enzymes hydrolyze esters and triacylglycerols and catalyze esterification and transesterification reactions. Cutinases are synthesize by plant pathogenic fungi, but some bacteria and plants have been found to produce cutinases as well. In nature they facilitate a pathogen’s invasion by hydrolyzing the cuticle that protects plants, but can be also used for saprophytic fungi as a way to nourish themselves. Cutinases can hydrolyze a wide range of substrates like esters, polyesters, triacylglycerols and waxes and that makes this enzyme very attractive for industrial purposes. This work discusses techniques of industrial interest such as immobilization and purification, as well as some of the most important uses of cutinases in industries.

Environmental role of aromatic carboxylesterases

The carboxylesterases (EC 3.1.1.x) are widely distributed and form an important yet diverse group of hydrolases catalysing the ester bond cleavage in a variety of substrates. Besides acting on plant cell wall components like cutin, tannin and feruloyl esters, they are often the first line of defence to metabolize drugs, xenobiotics, pesticides, insecticides and plastic. But for the promiscuity of some carboxylesterases and cutinases, very few enzymes act exclusively on aromatic carboxylic acid esters. Infrequent occurrence of aromatic carboxylesterases suggests that aromatic carboxylesters are inherently more difficult to hydrolyse than the regular carboxylesters because of both steric and polar effects. Naturally occurring aromatic carboxylesters were rare before the anthropogenic activity augmented their environmental presence and diversity. An appraisal of the literature shows that the hydrolysis of aromatic carboxylic esters is a uniquely difficult endeavour and hence deserves special attention. Enzymes to hydrolyse such esters are evolving rapidly in nature. Very few such enzymes are known and they often display much lower catalytic efficiencies. Obviously, the esters of aromatic carboxylic acids, including polyethylene terephthalate waste, pose an environmental challenge. In this review, we highlight the uniqueness of aromatic carboxylesters and then underscore the importance of relevant carboxylesterases.

Multiple structural states of Ca2+-regulated PET hydrolase, Cut190, and its correlation with activity and stability

An enzyme, Cut190, from a thermophilic isolate, Saccharomonospora viridis AHK190 could depolymerize polyethylene terephthalate (PET). The catalytic activity and stability of Cut190 and its S226P/R228S mutant, Cut190*, are regulated by Ca2+ binding. We previously determined the crystal structures of the inactive mutant of Cut190*, Cut190*S176A, in complex with metal ions, Ca2+ and Zn2+, and substrates, monoethyl succinate and monoethyl adipate. In this study, we determined the crystal structures of another mutant of Cut190*, Cut190**, in which the three C-terminal residues of Cut190* are deleted, and the inactive mutant, Cut190**S176A, in complex with metal ions. In addition to the previously observed closed, open and engaged forms, we determined the ejecting form, which would allow the product to irreversibly dissociate, followed by proceeding to the next cycle of reaction. These multiple forms would be stable or sub-stable states of Cut190, regulated by Ca2+ binding, and would be closely correlated with the enzyme function. Upon the deletion of the C-terminal residues, we found that the thermal stability increased while retaining the activity. The increased stability could be applied for the protein engineering of Cut190 for PET depolymerization as it requires the reaction above the glass transition temperature of PET.

Criteria for Engineering Cutinases: Bioinformatics Analysis of Catalophores

Cutinases are bacterial and fungal enzymes that catalyze the hydrolysis of natural cutin, a three-dimensional inter-esterified polyester with epoxy-hydroxy fatty acids with chain lengths between 16 and 18 carbon atoms. Due to their ability to accept long chain substrates, cutinases are also effective in catalyzing in vitro both the degradation and synthesis of several synthetic polyesters and polyamides. Here, we present a bioinformatics study that intends to correlate the structural features of cutinases with their catalytic properties to provide rational basis for their effective exploitation, particularly in polymer synthesis and biodegradation. The bioinformatics study used the BioGPS method (Global Positioning System in Biological Space) that computed molecular descriptors based on Molecular Interaction Fields (MIFs) described in the GRID force field. The information was used to generate catalophores, spatial representations of the ability of each enzymatic active site to establish hydrophobic and electrostatic interactions. These tools were exploited for comparing cutinases to other serine-hydrolases enzymes, namely lipases, esterases, amidases and proteases, and for highlighting differences and similarities that might guide rational engineering strategies. Structural features of cutinases with their catalytic properties were correlated. The “catalophore” of cutinases indicate shared features with lipases and esterases.

High-Throughput Optimization of Recombinant Protein Production in Microfluidic Gel Beads

Efficient production hosts are a key requirement for bringing biopharmaceutical and biotechnological innovations to the market. In this work, a truly universal high-throughput platform for optimization of microbial protein production is described. Using droplet microfluidics, large genetic libraries of strains are encapsulated into biocompatible gel beads that are engineered to selectively retain any protein of interest. Bead-retained products are then fluorescently labeled and strains with superior production titers are isolated using flow cytometry. The broad applicability of the platform is demonstrated by successfully culturing several industrially relevant bacterial and yeast strains and detecting peptides or proteins of interest that are secreted or released from the cell via autolysis. Lastly, the platform is applied to optimize cutinase secretion in Komagataella phaffii (Pichia pastoris) and a strain with 5.7-fold improvement is isolated. The platform permits the analysis of >10⁶ genotypes per day and is readily applicable to any protein that can be equipped with a His₆ -tag. It is envisioned that the platform will be useful for large screening campaigns that aim to identify improved hosts for large-scale production of biotechnologically relevant proteins, thereby accelerating the costly and time-consuming process of strain engineering.

Synthesis of 13 C-labelled cutin and suberin monomeric dicarboxylic acids of the general formula HO213 C-(CH2 )n -13 CO2 H (n = 10, 12, 14, 16, 18, 20, 22, 24, 26, 28)

13 C-labeled dicarboxylic acids HO213 C-(CH2 )n -13 CO2 H (n = 10, 12, 14, 16, 18, 20, 22, 24, 26, 28) have been synthesized as internal standards for LC-MS and GC-MS analysis of cutin and suberin monomer degradation by soil-based microorganisms. Different synthetic strategies had to be applied depending on the chain length of the respective synthetic target and because of economic considerations. 13 C-labels were introduced by nucleophilic substitution of a suitable leaving group with labelled potassium cyanide and subsequent hydrolysis of the nitriles to produce the corresponding dicarboxylic acids. All new compounds are characterized by GC/MS, IR, and NMR methods as well as by elemental analysis.

Structure-guided engineering of a Thermobifida fusca cutinase for enhanced hydrolysis on natural polyester substrate

Cutinases could degrade insoluble polyester, including natural cutin and synthetic plastic. However, their turnover efficiency for polyester remains too low for industrial application. Herein, we report the 1.54-Å resolution X-ray crystal structure of a cutinase from Thermobifida fusca and modeling structure in complex with a cutin mimic oligo-polyester C24H42O8. These efforts subsequently guided our design of cutinase variants with less bulky residues in the vicinity of the substrate binding site. The L90A and I213A variants exhibit increased hydrolysis activity (5- and 2.4-fold, respectively) toward cutin and also showed enhanced cotton scouring efficiency compared with the wild-type enzyme.

Fungal Hydrophobin RolA Enhanced PETase Hydrolysis of Polyethylene Terephthalate

Polyethylene terephthalate (PET) becomes one of the most well-known polyesters and is widely used as packaging material. Recently, polyethylene terephthalate hydrolase (PETase) has emerged as a potential biocatalyst demonstrating the ability to degrade polyethylene terephthalate (PET). We showed that the rate of PETase hydrolysis could be significantly increased in the presence of hydrophobin RolA. Hydrophobins represent a class of small fungal protein that has a high surface-active substance and can spontaneously self-assemble at hydrophilic-hydrophobic interfaces. In this work, a class I hydrophobin named RolA was extracted from the mycelium pellet collected from a fermentation culture of Aspergillus oryzae. The SDS-PAGE analysis of the isolated RolA showed the presence of 11 kDa polypeptide. Recombinant PETase from Ideonella sakaiensis was also successfully expressed in Escherichia coli as a soluble protein with molecular weight approximately 30 kDa. The hydrophobin RolA could enhance the PET hydrolysis in the presence of the recombinant PETase. The hydrolysis of PET bottle by RolA-PETase achieved the highest weight loss of 26% in 4 days. It is speculated that the wetting effect of RolA acts on PET surface converts PET to become hydrophilic that leads PETase easier to contact and attack the surface. Graphical Abstract.

Diversity, structure, and synteny of the cutinase gene of Colletotrichum species

Colletotrichum species complexes are among the top 10 economically important fungal plant pathogens worldwide because they can infect climacteric and nonclimacteric fruit at the pre and/or postharvest stages. C. truncatum is the major pathogen responsible for anthracnose of green and red bell pepper fruit worldwide. C. brevisporum was recently reported to be a minor pathogen of red bell pepper fruit in Trinidad, but has recently been reported as pathogenic to other host species in other countries. The ability of these phytopathogens to produce and secrete cutinase is required for dismantling the cuticle of the host plant and, therefore, crucial to the necrotrophic phase of their infection strategy. In vitro bioassays using different lipid substrates confirmed the ability of C. truncatum and C. brevisporum isolates from green and red bell peppers to secrete cutinase. The diversity, structure and organization and synteny of the cutinase gene were determined among different Colletotrichum species. Cluster analysis indicated a low level of nucleotide variation among C. truncatum sequences. Nucleotide sequences of C. brevisporum were more related to C. truncatum cutinase nucleotide sequences than to C. gloeosporioides. Cluster patterns coincided with haplotype and there was evidence of significant positive selection with no recombination signatures. The structure of the cutinase gene included two exons with one intervening intron and, therefore, one splice variant. Although amino acid sequences were highly conserved among C. truncatum isolates, diversity "hot spots" were revealed when the 66-amino acid coding region of 200 fungal species was compared. Twenty cutinase orthologues were detected among different fungal species, whose common ancestor is Pezizomycotina and it is purported that these orthologues arose through a single gene duplication event prior to speciation. The cutinase domain was retained both in structure and arrangement among 34 different Colletotrichum species. The order of aligned genomic blocks between species and the arrangement of flanking protein domains were also conserved and shared for those domains immediately located at the N- and C-terminus of the cutinase domain. Among these were an RNA recognition motif, translation elongation factor, signal peptide, pentatricopeptide repeat, and Hsp70 family of chaperone proteins, all of which support the expression of the cutinase gene. The findings of this study are important to understanding the evolution of the cutinase gene in C. truncatum as a key component of the biotrophic-necrotrophic switch which may be useful in developing gene-targeting strategies to decrease the pathogenic potential of Colletotrichum species.

Production of cutinase from Fusarium falciforme and its application for hydrophilicity improvement of polyethylene terephthalate fabric

Among 23 isolates of cutinase-producing fungi from Thailand, one strain of Fusarium falciforme PBURU-T5 exhibited the greatest cutinase activity (3.36 ± 0.12 U ml^-1) against p-nitrophenyl butyrate. This strain was found to produce an inducible cutinase when cultivated in the liquid mineral medium containing cutin from papaya peel as the sole carbon source. By optimizing the production condition based on the central composite experimental design, the maximal cutinase activity up to 4.82 ± 0.18 U ml^-1 was attained under the condition: 0.4% (w/v) papaya cutin as the carbon source, 0.3% (w/v) peptone as the nitrogen source, incubation temperature at 30 °C for 4 days, and initial pH 7.0. The crude enzyme was optimally active at 35 °C and pH 9.0 which was suitable for textile industrial application. The treatment with the crude PBURU-T5 cutinase (100 U g^-1 dry weight of fabric) could enhance the wetting time, water adsorption and moisture regain of polyethylene terephthalate fabric up to 1.9-, 1.2- and 1.3-fold, respectively, comparing with the conventional 1M NaOH treatment. The increment of these fabric properties by enzymatic treatment could facilitate the dyeing process and enhance the fabric softness. Thus, F. falciforme PBURU-T5 is the promising source of cutinase for the modification of the PET fabric surface.

Metal binding to cutinase-like enzyme from Saccharomonospora viridis AHK190 and its effects on enzyme activity and stability

A cutinase from Saccharomonospora viridis AHK190, Cut190, can hydrolyze polyethylene terephthalate and has a unique feature that the activity and stability are regulated by Ca2+ binding. Our recent structural and functional analyses showed three Ca2+ binding sites and their respective roles. Here, we analysed the binding thermodynamics of Mn2+, Zn2+ and Mg2+ to Cut190 and their effects on the catalytic activity and thermal stability. The binding affinities of Mn2+ and Zn2+ were higher than that of Mg2+ and are all entropy driven with a binding stoichiometry of three, one and one for Zn2+, Mn2+ and Mg2+, respectively. The catalytic activity was measured in the presence of the respective metals, where the activity of 0.25 mM Mn2+ was comparable to that of 2.5 mM Ca2+. Our 3D Reference Interaction Site Model calculations suggested that all the ions exhibited a high occupancy rate for Site 2. Thus, Mn2+ and Mg2+ would most likely bind to Site 2 (contributes to stability) with high affinity, while to Sites 1 and 3 (contributes to activity) with low affinity. We elucidate the metal-dependent structural and functional properties of Cut190 and show the subtle balance on structure stability and flexibility is controlled by specific metal ions.

Current knowledge on enzymatic PET degradation and its possible application to waste stream management and other fields

Enzymatic hydrolysis of polyethylene terephthalate (PET) has been the subject of extensive previous research that can be grouped into two categories, viz. enzymatic surface modification of polyester fibers and management of PET waste by enzymatic hydrolysis. Different enzymes with rather specific properties are required for these two processes. Enzymatic surface modification is possible with several hydrolases, such as lipases, carboxylesterases, cutinases, and proteases. These enzymes should be designated as PET surface–modifying enzymes and should not degrade the building blocks of PET but should hydrolyze the surface polymer chain so that the intensity of PET is not weakened. Conversely, management of PET waste requires substantial degradation of the building blocks of PET; therefore, only a limited number of cutinases have been recognized as PET hydrolases since the first PET hydrolase was discovered by Müller et al. (Macromol Rapid Commun 26:1400–1405, 2005). Here, we introduce current knowledge on enzymatic degradation of PET with a focus on the key class of enzymes, PET hydrolases, pertaining to the definition of enzymatic requirements for PET hydrolysis, structural analyses of PET hydrolases, and the reaction mechanisms. This review gives a deep insight into the structural basis and dynamics of PET hydrolases based on the recent progress in X-ray crystallography. Based on the knowledge accumulated to date, we discuss the potential for PET hydrolysis applications, such as in designing waste stream management.

Biocatalytic Degradation of Parabens Mediated by Cell Surface Displayed Cutinase

Parabens are emerging environmental contaminants with known endocrine-disrupting effects. This study created a novel biocatalyst (named as SDFsC) by expressing the enzyme Fusarium solani pisi cutinase (FsC) on the cell surface of Baker's yeast Sacchromycese cerevisiae and demonstrated successful enzyme-mediated removal of parabens for the first time. Parabens with different side chain structures had different degradation rates by the SDFsC. The SDFsC preferentially degraded the parabens with relatively long alkyl or aromatic side chains. The structure-dependent degradability was in a good agreement with the binding energy between the active site of FsC and different parabens. In real wastewater effluent solution, the SDFsC effectively degraded 800 μg/L of propylparaben, butylparaben, and benzylparaben, either as a single compound or as a mixture, within 48 h. The estrogenic activity of parabens was considerably reduced as the parent parabens were degraded into 4-hydroxybenzoic acid via hydrolysis pathway by the SDFsC. The SDFsC showed superior reusability and maintained 93% of its initial catalytic activity after six rounds of paraben degradation reaction. Results from this study provide scientific basis for developing biocatalysis as a green chemistry alternative for advanced treatment of parabens in sustainable water reclamation.

Spatially confined lignin nanospheres for biocatalytic ester synthesis in aqueous media

Dehydration reactions proceed readily in water-filled biological cells. Development of biocatalysts that mimic such compartmentalized reactions has been cumbersome due to the lack of low-cost nanomaterials and associated technologies. Here we show that cationic lignin nanospheres function as activating anchors for hydrolases, and enable aqueous ester synthesis by forming spatially confined biocatalysts upon self-assembly and drying-driven aggregation in calcium alginate hydrogel. Spatially confined microbial cutinase and lipase retain 97% and 70% of their respective synthetic activities when the volume ratio of water to hexane increases from 1:1 to 9:1 in the reaction medium. The activity retention of industrially most frequently used acrylic resin-immobilized Candida antarctica lipase B is only 51% under similar test conditions. Overall, our findings enable fabrication of robust renewable biocatalysts for aqueous ester synthesis, and provide insight into the compartmentalization of diverse heterogeneous catalysts.

Development of biocatalysts that mimic compartmentalized reactions in cells has been cumbersome due to the lack of low-cost materials and associated technologies. Here the authors show that cationic lignin nanospheres function as activating anchors for hydrolases, and enable aqueous ester synthesis by forming spatially confined biocatalysts.

Spatially confined lignin nanospheres for biocatalytic ester synthesis in aqueous media

Dehydration reactions proceed readily in water-filled biological cells. Development of biocatalysts that mimic such compartmentalized reactions has been cumbersome due to the lack of low-cost nanomaterials and associated technologies. Here we show that cationic lignin nanospheres function as activating anchors for hydrolases, and enable aqueous ester synthesis by forming spatially confined biocatalysts upon self-assembly and drying-driven aggregation in calcium alginate hydrogel. Spatially confined microbial cutinase and lipase retain 97% and 70% of their respective synthetic activities when the volume ratio of water to hexane increases from 1:1 to 9:1 in the reaction medium. The activity retention of industrially most frequently used acrylic resin-immobilized Candida antarctica lipase B is only 51% under similar test conditions. Overall, our findings enable fabrication of robust renewable biocatalysts for aqueous ester synthesis, and provide insight into the compartmentalization of diverse heterogeneous catalysts.

Hydrolysis of Ionic Phthalic Acid Based Polyesters by Wastewater Microorganisms and Their Enzymes

Water-soluble polyesters are used in a range of applications today and enter wastewater treatment plants after product utilization. However, little is known about extracellular enzymes and aquatic microorganisms involved in polyester biodegradation and mineralization. In this study, structurally different ionic phthalic acid based polyesters (the number-average molecular weights (M_n) 1770 to 10 000 g/mol and semi crystalline with crystallinity below 1%) were synthesized in various combinations. Typical wastewater microorganisms like Pseudomonas sp. were chosen for in-silico screening toward polyester hydrolyzing enzymes. Based on the in-silico search, a cutinase from Pseudomonas pseudoalcaligenes (PpCutA) and a putative lipase from Pseudomonas pelagia (PpelaLip) were identified. The enzymes PpCutA and PpelaLip were demonstrated to hydrolyze all structurally different polyesters. Activities on all the polyesters were also confirmed with the strains P. pseudoalcaligenes and P. pelagia. Parameters identified to enhance hydrolysis included increased water solubility and polyester hydrophilicity as well as shorter diol chain lengths. For example, polyesters containing 1,2-ethanediol were hydrolyzed faster than polyesters containing 1,8-octanediol. Interestingly, the same trend was observed in biodegradation experiments. This information is important to gain a better mechanistic understanding of biodegradation processes of polyesters in WWTPs where the extracellular enzymatic hydrolysis seems to be the limiting step.

A new arylesterase from Pseudomonas pseudoalcaligenes can hydrolyze ionic phthalic polyesters

Extracellular enzymes are assumed to be responsible for the initial and rate limiting step in biodegradation of polymers. Mainly enzymes with aliphatic esters as their natural substrates (e.g. lipase, cutinases) have until now been evaluated for polyester hydrolysis studies. However, the potential of enzymes with aromatic esters as their natural substrates (e.g. arylesterases) have been neglected although many types of polyester today contain aromatic moieties. Consequently, in order to elucidate biodegradation of phthalic polyesters in aquatic systems, a novel arylesterase (PpEst) was investigated related to hydrolysis of ionic phthalic polyesters. The hydrolysis of various ionic phthalic polyesters by PpEst was mechanistically studied. The polyester building blocks (terephthalic acid (TA), 5-sulfoisophthalic acid (NaSIP) and alkyl or ether diols) were systematically varied to investigate the impact on hydrolysis. PpEst effectively hydrolyzed all 14 synthetized ionic phthalic polyesters as indicated by released TA. However, no NaSIP was detected indicating that PpEst has a limited capacity to cleave bonds in close vicinity to the ionic monomer NaSIP. The systematic study indicated that increasing water solubility and hydrophilicity significantly enhanced hydrolysis. A higher release of TA was seen with increasing NaSIP ratio while up to 20 times more TA was released when alkyl diols were replaced by ether diol analogues. In contrast, cyclic and branched diols had a negative effect on hydrolysis when compared to linear diols. PpEst also revealed a linear release of TA over seven days for ether containing polyesters, indicating a very stable enzyme.

Effect of processing technologies and storage conditions on stability of black currant juices with special focus on phenolic compounds and sensory properties

Juice was pressed from black currants without enzyme treatment (NEB=Non-Enzymatic Berry) followed by re-pressing of the residue with enzymes (EPR=Enzymatic Press Residue) and the results were compared to the conventional enzyme-aided berry pressing (EB=Enzymatic Berry). EPR-juice had 9- and 5-fold higher contents of phenolic compounds compared with the NEB- and EB-juices, respectively. Effect of the low content and stability of phenolics was noticed as loss of the visual color in the NEB-juice during storage. The decrease in monomeric anthocyanins and the increase in phenolic acids were most severe in the NEB-juice, whereas the most significant decline in hydroxycinnamic acid derivatives occurred in the enzyme-treated juices. Storage in light induced less change in the phenolic composition in EPR-juice than in the two other juices. The study gave new knowledge on changes in individual metabolites, in sensory properties and in the shelf life of berry juices.

Production of secretory cutinase by recombinant Saccharomyces cerevisiae protoplasts

Background

During heterologous protein production using recombinant microbes, the protein tends to accumulate in the cell and may not be secreted. Here, we studied the production of secretory cutinase (heterologous protein) by recombinant Saccharomyces cerevisiae protoplasts.

Findings

Recombinant S. cerevisiae cells (i.e., cells into which the cutinase gene was transferred) secreted trace amounts of cutinase into the broth. Approximately 28 % of the cutinase produced in the cells localized to the cell walls and/or between cell wall and cell membrane (CW). In comparison with cell culture, protoplasts in a static culture secreted measurable amounts of cutinase into the broth. Protoplasts were protected from physical and osmotic stresses by entrapping them in a membrane capsule with a low-viscous liquid-core of 1.92 % w/v calcium-alginate. To increase secretory cutinase production, the entrapped protoplasts were cultivated in a shake flask at low osmotic pressure without disruption. During 60 h of cultivation, the extracellular cutinase activity of the free protoplasts at 29.3 atm and protoplasts entrapped in the capsule at 17.2 atm were 0.13 and 0.39 U/mL, respectively.

Conclusions

This is the first report which demonstrates that the efficient production of a secretable enzyme by using protoplasts isolated from recombinant microbes. This system described here is useful to produce products that accumulate in the CW.

Electronic supplementary material

The online version of this article (doi:10.1186/s40064-016-1806-4) contains supplementary material, which is available to authorized users.

pH effects on the structural dynamics of cutinase from Trichoderma reesei: insights from molecular dynamics simulations

The influence of different pH conditions on conformational changes of Tr cutinase was investigated using molecular dynamics simulations.