Towards the biofilm characterization and regulation in biological wastewater treatment

New strategy for integration of anaerobic side-stream reactor with mainstream B-stage nitritation for short-cut nitrogen removal with granulation

This study reported a successful mainstream B-stage nitritation reactor with sludge granulation that incorporated a side-stream anaerobic reactor to treat municipal wastewater A-stage effluent. With influent COD/N and COD/P ratios of 2.60 and 27.1, respectively, the system achieved a stable nitrite accumulating ratio (NAR) of 95.1% via partial nitrification with sludge granulations. Kinetic assessment,16S ribosomal RNA sequencing, and functional gene marker quantification confirmed successful nitrite-oxidizing bacteria (NOB) out-selection (<0.05% relative abundance), while none of the commonly employed approaches for NOB out-selection occurred in our study. Notably, approximately 90% of the total biomass was in the biofilm in the mainstream sequencing batch reactor (SBR), with the remaining 10% of the biomass in suspension as granules under the selective wasting strategy. The substrates and oxygen gradient along the depth of the biofilm's layered structure, alongside the anaerobic conditions in the side-stream reactor, were suggested to play roles in NOB suppression and out-selection. Overall, this study provided evidence for a possible new strategy for achieving stable mainstream B-stage nitritation, which is the prerequisite for the downstream anammox process. The novelty aspect of the systems, including the incorporation of an anaerobic sire-stream reactor, absence of the employment of any previously reported nitritation strategies, and granulation formation, provided possible new feasible routes to achieve mainstream short-cut nitrogen removal for efficient wastewater treatment. PRACTITIONER POINTS: Stable partial nitrification achieved in mainstream B-stage SBR under conditions distinct from previous reports. NOB out-selection confirmed by both activities' tests and molecular analysis. Thick biofilm and anaerobic side-stream reactor likely facilitated NOB suppression. Stable sludge granulation was maintained with selective wasting strategy.

Characterizing algal-bacterial symbiotic biofilms: Insights into coexistence of algae and anaerobic microorganisms

This study constructed an integrated algae/partial nitrification/anammox biofilm system and operated it for 240 days. The total nitrogen removal efficiency exceeded 90 %. The structure, compositions, and function of this symbiotic biofilm, which played a pivotal role in the system, were analyzed in detail. Microscope photos and fluorescence in situ hybridization both showed that bacteria and algae were well integrated. The dissolved oxygen gradient further confirmed that different functional microorganisms grew at varying depths within biofilm. Algae formed an oxygen-producing zone (0-0.48 mm), followed by ammonia oxidizing bacteria (AOB) consuming oxygen to form an oxygen-consuming zone (0.48-0.86 mm), and anaerobic ammonia oxidizing bacteria (AnAOB) removed nitrogen in anaerobic zone (>0.86 mm). Chlorella, Nitrosomonas and Candidatus_Kuenenia were identified as the dominant algae, AOB and AnAOB, with relative abundances of 11.80 %, 19.77 % and 3.07 %, respectively. This layered biofilm benefitted providing a suitable environment for various microorganisms to survive within a complex biofilm.

Recent advances in the pathogenesis and prevention strategies of dental calculus

Dental calculus severely affects the oral health of humans and animal pets. Calculus deposition affects the gingival appearance and causes inflammation. Failure to remove dental calculus from the dentition results in oral diseases such as periodontitis. Apart from adversely affecting oral health, some systemic diseases are closely related to dental calculus deposition. Hence, identifying the mechanisms of dental calculus formation helps protect oral and systemic health. A plethora of biological and physicochemical factors contribute to the physiological equilibrium in the oral cavity. Bacteria are an important part of the equation. Calculus formation commences when the bacterial equilibrium is broken. Bacteria accumulate locally and form biofilms on the tooth surface. The bacteria promote increases in local calcium and phosphorus concentrations, which triggers biomineralization and the development of dental calculus. Current treatments only help to relieve the symptoms caused by calculus deposition. These symptoms are prone to relapse if calculus removal is not under control. There is a need for a treatment regime that combines short-term and long-term goals in addressing calculus formation. The present review introduces the mechanisms of dental calculus formation, influencing factors, and the relationship between dental calculus and several systemic diseases. This is followed by the presentation of a conceptual solution for improving existing treatment strategies and minimizing recurrence.

Antibacterial copper-filled TiO2 coating of cardiovascular implants to prevent infective endocarditis-A pilot study

BACKGROUND

Infective endocarditis (IE) poses a significant health risk, especially in patients with prosthetic heart valves. Despite advances in treatment, mortality rates remain high. This study aims to investigate the antibacterial properties of a copper titanium dioxide (4× Cu-TiO2) coating on cardiovascular implants against Staphylococcus aureus, a common causative agent of IE.

METHODS

Titanium oxide carriers functionalized with copper ions were employed as an antibacterial coating for heart and vascular prostheses. The coating's antibacterial efficacy was assessed using S. aureus ATCC 29213. Microscopic evaluations were conducted on both biological and artificial materials. Antibacterial activity was qualitatively assessed via a modified disc diffusion method and quantitatively measured through colony counts in NaCl suspensions.

RESULTS

The coating process was successfully applied to all tested cardiovascular prosthetic materials. Qualitative assessments of antibacterial effectiveness revealed an absence of bacterial growth in the area directly beneath the coated valve. Quantitative evaluations showed a significant reduction in bacterial colonization on coated mechanical valves, with 2.95 × 104 CFU per valve, compared to 1.91 × 105 CFU in control valves.

CONCLUSIONS

The 4× Cu-TiO2 coating demonstrated promising antibacterial properties against S. aureus, suggesting its potential as an effective strategy for reducing the risk of bacterial colonization of cardiovascular implants. Further studies are needed to assess the longevity of the coating and its efficacy against other pathogens.

In situ assessment of the initial phase of wastewater biofilm formation: Effect of the presence of algae in an aerobic bacterial biofilm system

The initial start-up attachment stage that dominates biofilm formation is an unstable process and is time-consuming. In the present study, Chlorella sp. was introduced into a general aerobic biofilm system to explore whether the addition of algae improved the initial attachment phase of biofilm. Compared with those of the bacterial biofilms, the initial algal-bacterial biofilms were more stable and had a thicker, denser, and rougher surface. Further investigation suggested that the concentration of extracellular polymeric substances (EPSs) in the algal-bacterial biofilm was 31.33 % greater than that in the bacterial biofilm. Additionally, the algal-bacterial flocs had greater free energies of absolute cohesion (ΔGcoh) and adhesion energy (∆Gadh) than did the bacterial flocs. These phenomena contribute to the speediness and stabilization of initial algal-bacterial start-up biofilms. Specifically, algae inoculation increased microbial community diversity and promoted the growth of bacterial members related to biofilm development. In conclusion, both physicochemical interactions and biological processes strongly influence microbial attachment during the initial biofilm formation process and further promote strengthening.

Three dimensional printed biofilms: Fabrication, design and future biomedical and environmental applications

Three dimensional printing has emerged as a widely acceptable strategy for the fabrication of mammalian cell laden constructs with complex microenvironments for tissue engineering and regenerative medicine. More recently 3D printed living materials containing microorganisms have been developed and matured into living biofilms. The potential for engineered 3D biofilms as in vitro models for biomedical applications, such as antimicrobial susceptibility testing, and environmental applications, such as bioleaching, bioremediation, and wastewater purification, is extensive but the need for an in-depth understanding of the structure-function relationship between the complex construct and the microorganism response still exists. This review discusses 3D printing fabrication methods for engineered biofilms with specific structural features. Next, it highlights the importance of bioink compositions and 3D bioarchitecture design. Finally, a brief overview of current and potential applications of 3D printed biofilms in environmental and biomedical fields is discussed.

Microalgae cell adhesions on hydrophobic membrane substrates using quartz crystal microbalance with dissipation

Microalgal cell adhesion and biofilm formation are affected by interactions between microalgae strains and membrane materials. Variations of surface properties of microalgae and membrane materials are expected to affect cell-membranes and cell-cell interactions and thus initial microalgal cell adhesion and biofilm formation rates. Hence, it should be possible to identify the dominant mechanisms controlling microalgal cell adhesion and biofilm formation. The effects of surface properties of three different microalgal strains and three different types of membrane materials on microalgal cell adhesion and biofilm formation were systematically investigated in real time by monitoring changes in the oscillation frequency and dissipation of the quartz crystal resonator (QCM-D). The results revealed that in general a higher surface free energy, more negative zeta potential, and higher surface roughness of membrane materials positively correlated with a larger quantity of microalgae cell deposition, while a more hydrophilic microalgae with a larger negative zeta potential preferred to attach to a more hydrophobic membrane material. The adhered microalgal layers exhibited viscoelastic properties. The relative importance of these mechanisms in controlling microalgae cell attachment and biofilm formation might vary, depending on the properties of specific microalgae species and hydrophobic membrane materials used.

Prolonged survival time of Daphnia magna exposed to polylactic acid breakdown nanoplastics

Polylactic acid nanoparticles (PLA NPs) according to food and drug administration are biodegradable and biocompatible polymers that have received a lot of attention due to their natural degradation mechanism. Although there is already available information concerning the effects of PLA microplastic to aquatic organisms, the knowledge about PLA NPs is still vague. In the present study, we analyzed the chemical composition of engineered PLA NPs, daily used PLA items and their breakdown products. We show that PLA breakdown products are oxidized and may contain aldehydes and/or ketones. The breakdown produces nanosized particles, nanoplastics, and possibly other small molecules as lactide or cyclic oligomers. Further, we show that all PLA breakdown nanoplastics extended the survival rate in Daphnia magna in an acute toxicity assay, however, only PLA plastic cup breakdown nanoplastics showed a significant difference compared to a control group.

Microbial Biofilms: Applications, Clinical Consequences, and Alternative Therapies

Biofilms are complex communities of microorganisms that grow on surfaces and are embedded in a matrix of extracellular polymeric substances. These are prevalent in various natural and man-made environments, ranging from industrial settings to medical devices, where they can have both positive and negative impacts. This review explores the diverse applications of microbial biofilms, their clinical consequences, and alternative therapies targeting these resilient structures. We have discussed beneficial applications of microbial biofilms, including their role in wastewater treatment, bioremediation, food industries, agriculture, and biotechnology. Additionally, we have highlighted the mechanisms of biofilm formation and clinical consequences of biofilms in the context of human health. We have also focused on the association of biofilms with antibiotic resistance, chronic infections, and medical device-related infections. To overcome these challenges, alternative therapeutic strategies are explored. The review examines the potential of various antimicrobial agents, such as antimicrobial peptides, quorum-sensing inhibitors, phytoextracts, and nanoparticles, in targeting biofilms. Furthermore, we highlight the future directions for research in this area and the potential of phytotherapy for the prevention and treatment of biofilm-related infections in clinical settings.

Advances in Material Modification with Smart Functional Polymers for Combating Biofilms in Biomedical Applications

Biofilms as living microorganism communities are found anywhere, and for the healthcare sector, these constitute a threat and allied mechanism for health-associated or nosocomial infections. This review states the basis of biofilms and their formation. It focuses on their relevance for the biomedical sector, generalities, and the major advances in modified or new synthesized materials to prevent or control biofilm formation in biomedicine. Biofilm is conceptualized as an aggregate of cells highly communicated in an extracellular matrix, which the formation obeys to molecular and genetic basis. The biofilm offers protection to microorganisms from unfavorable environmental conditions. The most frequent genera of microorganisms forming biofilms and reported in infections are Staphylococcus spp., Escherichia spp., and Candida spp. in implants, heart valves, catheters, medical devices, and prostheses. During the last decade, biofilms have been most commonly related to health-associated infections and deaths in Europe, the United States, and Mexico. Smart, functional polymers are materials capable of responding to diverse stimuli. These represent a strategy to fight against biofilms through the modification or synthesis of new materials. Polypropylene and poly-N-isopropyl acrylamide were used enough in the literature analysis performed. Even smart polymers serve as delivery systems for other substances, such as antibiotics, for biofilm control.

Mainstream deammonification at ambient temperature treating real sewage by a plug-flow fixed-bed reactor based on zeolite/tourmaline-modified polyurethane carriers

A plug-flow fixed-bed reactor (PFBR) with zeolite/tourmaline-modified polyurethane (ZTP) carriers (PFBR_ZTP) was constructed to realize mainstream deammonification for real domestic sewage treatment. The PFBR_ZTP and PFBR were operated for 111 days treating aerobically pretreated sewage in parallel. A higher nitrogen removal rate of 0.12 kg N·(m³·d)^-1 was achieved in PFBR_ZTP despite lowering the temperature (16.8-19.7 ℃) and fluctuating water quality. Meanwhile, it was indicated that anaerobic ammonium oxidation dominated (64.0 ±13.2%) in PFBR_ZTP, by nitrogen removal pathway analysis and high anaerobic ammonium-oxidizing bacteria (AnAOB) activity (2.89 mg N·(g VSS·h)^-1). And, the lower protein/polysaccharides (PS) ratio further indicated a better biofilm structure in PFBR_ZTP owing to a higher abundance of microorganisms relevant to PS and cryoprotective EPS secretion. Furthermore, partial denitrification was an important nitrite supply process in PFBR_ZTP based on low AOB activity/AnAOB activity ratio, higher Thauera abundance and a remarkably positive correlation between Thauera abundance and AnAOB activity.

Biofilm-based technology for industrial wastewater treatment: current technology, applications and future perspectives

The microbial community in biofilm is safeguarded from the action of toxic chemicals, antimicrobial compounds, and harsh/stressful environmental circumstances. Therefore, biofilm-based technology has nowadays become a successful alternative for treating industrial wastewater as compared to suspended growth-based technologies. In biofilm reactors, microbial cells are attached to static or free-moving materials to form a biofilm which facilitates the process of liquid and solid separation in biofilm-mediated operations. This paper aims to review the state-of-the-art of recent research on bacterial biofilm in industrial wastewater treatment including biofilm fundamentals, possible applications and problems, and factors to regulate biofilm formation. We discussed in detail the treatment efficiencies of fluidized bed biofilm reactor (FBBR), trickling filter reactor (TFR), rotating biological contactor (RBC), membrane biofilm reactor (MBfR), and moving bed biofilm reactor (MBBR) for different types of industrial wastewater treatment. Besides, biofilms have many applications in food and agriculture, biofuel and bioenergy production, power generation, and plastic degradation. Furthermore, key factors for regulating biofilm formation were also emphasized. In conclusion, industrial applications make evident that biofilm-based treatment technology is impactful for pollutant removal. Future research to address and improve the limitations of biofilm-based technology in wastewater treatment is also discussed.

Peaks, pores, and dragon eggs: Uncovering and quantifying the heterogeneity of treatment wetland biofilm matrices

Biofilms serve to house diverse microbial communities, which are responsible for the majority of wastewater constituent degradation and transformation in treatment wetlands (TWs). TW biofilm has been generally conceptualized as a relatively uniform film covering available surfaces. However, no studies attaining direct visual 3D representations of biofilm morphology have been conducted. This study focuses on imaging the morphology of detached, gravel-associated, and rhizospheric (Phalaris arundinacea) biofilms from subsurface TW mesocosms. Images obtained through both traditional light microscopy, environmental scanning electron microscopy (E-SEM) and Wet-SEM revealed that TW biofilms are structurally heterogeneous ranging from corrugated films to clusters of aggregates. Features such as water channels and pores were observed suggesting that pollutant transport inside biofilms is complex, and that the interfacial surface area between water and biofilm is much larger than previously understood. Biofilm thickness generally ranged between 170 and 240 μm, with internal biofilm porosities estimated as 34 ± 10 %, reaching a maximum of 50 %. Internal biofilm matrix pore diameters ranged from 1 to 205.2 μm, with a distribution that favored pores and channels smaller than 10 μm, and a mean equivalent spherical diameter of 8.6 μm. Based on the large variation in pore and channel sizes it is expected that a variety of flow regimes and therefore pollutant dynamics are likely to occur inside TW biofilm matrices. Based on the visual evidence and analysis, a new conceptual model was created to reflect the microscale TW biofilm dynamics and morphology. This new conceptual model will serve to inform future biokinetic modelling, microscale hydrology, microbial community assessment, and pollutant treatment studies.

Iron Acquisition Mechanisms and Their Role in the Virulence of Acinetobacter baumannii

Iron is an essential element for survival of most organisms. One mechanism of host defense is to tightly chelate iron to several proteins to limit its extracellular availability. This has forced pathogens such as Acinetobacter baumannii to adapt mechanisms for the acquisition and utilization of iron even in iron-limiting conditions. A. baumannii uses a variety of iron acquisition strategies to meet its iron requirements. It can lyse erythrocytes to harvest the heme molecules, use iron-chelating siderophores, and use outer membrane vesicles to acquire iron. Iron acquisition pathways, in general, have been seen to affect many other virulence factors such as cell adherence, cell motility, and biofilm formation. The knowledge gained from research on iron acquisition led to the synthesis of the antibiotic cefiderocol, which uses iron uptake pathways for entry into the cell with some success as a novel cephalosporin. Understanding the mechanisms of iron acquisition of A. baumannii allows for insight into clinical infections and offer potential targets for novel antibiotics or potentiators of current drugs.

Exploring the Function of Quorum Sensing Regulated Biofilms in Biological Wastewater Treatment: A Review

Quorum sensing (QS), a type of bacterial cell–cell communication, produces autoinducers which help in biofilm formation in response to cell population density. In this review, biofilm formation, the role of QS in biofilm formation and development with reference to biological wastewater treatment are discussed. Autoinducers, for example, acyl-homoserine lactones (AHLs), auto-inducing oligo-peptides (AIPs) and autoinducer 2, present in both Gram-negative and Gram-positive bacteria, with their mechanism, are also explained. Over the years, wastewater treatment (WWT) by QS-regulated biofilms and their optimization for WWT have gained much attention. This article gives a comprehensive review of QS regulation methods, QS enrichment methods and QS inhibition methods in biological waste treatment systems. Typical QS enrichment methods comprise adding QS molecules, adding QS accelerants and cultivating QS bacteria, while typical QS inhibition methods consist of additions of quorum quenching (QQ) bacteria, QS-degrading enzymes, QS-degrading oxidants, and QS inhibitors. Potential applications of QS regulated biofilms for WWT have also been summarized. At last, the knowledge gaps present in current researches are analyzed, and future study requirements are proposed.

Can the carbon metabolic activity of biofilm be regulated by the hydrodynamic conditions in urban rivers?

Hydrodynamic regulation is widely used to improve the water quality of urban rivers. However, it is yet to explore substantially whether hydrodynamics could regulate the metabolic activity of biofilm in such aquatic systems. Herein, the pilot experiment of hydrodynamics in the rotation tanks was designed, including two experiment phases, namely constant flow and adjusting flow for 21 days and 14 days, respectively. In constant flow phase, biofilms grew in five shear stress gradients (R1-R5, 0.0044- 0.12 Pa). The carbon metabolic rate (k) of mature biofilms evaluated by BIOLOG ECO microplates showed a hump-shaped relationship with increasing shear stress, with R3 (0.049 Pa) the highest, while R5 (0.12 Pa) the lowest. To verify whether the metabolic activity of biofilm cultured at constant flow phase can be regulated by shear stress, we initiated the adjusting flow phase, and shear stress in reactors was reset uniformly at 0.049 Pa (with the highest k). Results showed the carbon metabolic activity of biofilm in reactor R4 and R5 increased rapidly by day 3, and there was no significant difference between the carbon metabolic rates among the five treatments by day 14. Meanwhile, the utilization levels of polymers and carbohydrates by biofilms were significantly different among the five treatments after hydrodynamic regulations. These results suggested that the total carbon metabolic activity of biofilm can be regulated by hydrodynamics, while the divergent changes of the specific carbon source category might affect the biofilm-mediated carbon biogeochemical processes, which should be considered for the application of hydrodynamic regulation in river ecological restoration projects.

Exploiting Biofilm Characteristics to Enhance Biological Nutrient Removal in Wastewater Treatment Plants

Biological treatments are integral processes in wastewater treatment plants (WWTPs). They can be carried out using sludge or biofilm processes. Although the sludge process is effective for biological wastewater systems, it has some drawbacks that make it undesirable. Hence, biofilm processes have gained popularity, since they address the drawbacks of sludge treatments, such as the high rates of sludge production. Although biofilms have been reported to be essential for wastewater, few studies have reviewed the different ways in which the biofilm properties can be explored, especially for the benefit of wastewater treatment. Thus, this review explores the properties of biofilms that can be exploited to enhance biological wastewater systems. In this review, it is revealed that various biofilm properties, such as the extracellular polymeric substances (EPS), quorum sensing (Qs), and acylated homoserine lactones (AHLs), can be enhanced as a sustainable and cost-effective strategy to enhance the biofilm. Moreover, the exploitation of other biofilm properties such as the SOS, which is only reported in the medical field, with no literature reporting it in the context of wastewater treatment, is also recommended to improve the biofilm technology for wastewater treatment processes. Additionally, this review further elaborates on ways that these properties can be exploited to advance biofilm wastewater treatment systems. A special emphasis is placed on exploiting these properties in simultaneous nitrification and denitrification and biological phosphorus removal processes, which have been reported to be the most sensitive processes in biological wastewater treatment.

Special Issue: Biofilm Composition and Applications

Biofilms can be formed on both biotic and abiotic surfaces, including on living tissues, indwelling medical devices, industrial or portable water system piping, and natural aquatic systems [...]

Phenotypic and transcriptional study of the antimicrobial activity of silver and zinc oxide nanoparticles on a wastewater biofilm-forming Pseudomonas aeruginosa strain

The extensive use of nanoparticles (NPs) in industrial processes makes their potential release into the environment an issue of concern. Ag and ZnO NPs are among the most frequently used NPs, potentially reaching concentrations of 1-4 and 64 mg/kg, respectively, in Wastewater Treatment Plants (WWTPs), with unknown effects over microbial populations. Thus, we examined, in depth, the effect of such NPs on a P. aeruginosa strain isolated from a WWTP. We evaluated the growth, ROS production and biofilm formation, in addition to the transcriptomic response in presence of Ag and ZnO NPs at concentrations potentially found in sewage sludge. The transcriptomic and phenotypic patterns of P. aeruginosa in presence of Ag NPs were, in general, similar to the control treatment, with some specific transcriptional impacts affecting processes involved in biofilm formation and iron homeostasis. The biofilms formed under Ag NPs treatment were, on average, thinner and more homogeneous. ZnO NPs also alters the biofilm formation and iron homeostasis in P. aeruginosa, however, the higher and more toxic concentrations utilized caused an increase in cell death and eDNA release. Thus, the biofilm development was characterized by EPS production, via eDNA release. The number of differentially expressed genes in presence of ZnO NPs was higher compared to Ag NPs treatment. Even though the responses of P. aeruginosa to the presence of the studied metallic NPs was at some extent similar, the higher and more toxic concentrations of ZnO NPs produced greater changes concerning cell viability and ROS production, causing disruption in biofilm development.

Biofilm carriers for anaerobic ammonium oxidation: Mechanisms, applications, and roles in mainstream systems

The anaerobic ammonium oxidation (ANAMMOX) process was proposed as the most promising nitrogen removal process. Biofilm carriers were demonstrated to effectively enhance the anaerobic ammonium oxidating bacteria (AnAOB) retention. This paper reviews the effect of carrier properties on the AnAOB biofilm development according to the biofilm development process and the application state-of-art of three major kinds of conventional carriers, organic-based, inorganic-based carriers, and gel carriers, from the view of system performance and functional microorganisms. The carrier modification methods and purpose are thoroughly summarized and classified into three categories corresponding to various carrier defects. Four important aspects of the desirable carrier for the mainstream ANAMMOX process were proposed, including providing spatial configuration, enhancing the biomass retention, reinforcing the activity, and improving the growth environment, which needs to combine the advantages of organic and inorganic materials. Eventually, the future application directions of novel carriers for the ANAMMOX-based process were also highlighted.

Exploring the role of microbial biofilm for industrial effluents treatment

Biofilm formation on biotic or abiotic surfaces is caused by microbial cells of a single or heterogeneous species. Biofilm protects microbes from stressful environmental conditions, toxic action of chemicals, and antimicrobial substances. Quorum sensing (QS) is the generation of autoinducers (AIs) by bacteria in a biofilm to communicate with one other. QS is responsible for the growth of biofilm, synthesis of exopolysaccharides (EPS), and bioremediation of environmental pollutants. EPS is used for wastewater treatment due to its three-dimensional matrix which is composed of proteins, polysaccharides, humic-like substances, and nucleic acids. Autoinducers mediate significantly the degradation of environmental pollutants. Acyl-homoserine lactone (AHL) producing bacteria as well as quorum quenching enzyme or bacteria can effectively improve the performance of wastewater treatment. Biofilms-based reactors due to their economic and ecofriendly nature are used for the treatment of industrial wastewaters. Electrodes coated with electro-active biofilm (EAB) which are obtained from sewage sludge, activated sludge, or industrial and domestic effluents are getting popularity in bioremediation. Microbial fuel cells are involved in wastewater treatment and production of energy from wastewater. Synthetic biological systems such as genome editing by CRISPR-Cas can be used for the advanced bioremediation process through modification of metabolic pathways in quorum sensing within microbial communities. This narrative review discusses the impacts of QS regulatory approaches on biofilm formation, extracellular polymeric substance synthesis, and role of microbial community in bioremediation of pollutants from industrial effluents.

Effects and relevant mechanisms of non-antibiotic factors on the horizontal transfer of antibiotic resistance genes in water environments: A review

Antibiotic resistance has created obstacles in the treatment of infectious diseases with antibiotics. The horizontal transfer of antibiotic resistance genes (ARGs) can exacerbate the dissemination of antibiotic resistance in water environments. In addition to antibiotic selective pressure, multiple non-antibiotic factors can affect the horizontal transfer of ARGs. Herein, we seek to comprehensively review the effects and relevant mechanisms of non-antibiotic factors on the horizontal transfer of ARGs in water environments, especially contaminants from human activities and water treatment processes. Four pathways have been identified to accomplish horizontal gene transfer (HGT), i.e., conjugation, transformation, transduction, and vesiduction. Changes in conjugative frequencies by non-antibiotic factors are mainly related to their concentrations, which conform to hormesis. Relevant mechanisms involve the alteration in cell membrane permeability, reactive oxygen species, SOS response, pilus, and mRNA expression of relevant genes. Transformation induced by extracellular DNA may be more vulnerable to non-antibiotic factors than other pathways. Except bacteriophage infection, the effects of non-antibiotic factors on transduction exhibit many similarities with that of conjugation. Given the secretion of membrane vesicles stimulated by non-antibiotic factors, their effects on vesiduction can be inferred. Furthermore, contaminants from human activities at sub-inhibitory or environmentally relevant concentrations usually promote HGT, resulting in further dissemination of antibiotic resistance. The horizontal transfer of ARGs is difficult to be inhibited by individual water treatment processes (e.g., chlorination, UV treatment, and photocatalysis) unless they attain sufficient intensity. Accordingly, the synergistic application containing two or more water treatment processes is recommended. Overall, we believe this review can elucidate the significance for risk assessments of contaminants from human activities and provide insights into the development of environment-friendly and cost-efficient water treatment processes to inhibit the horizontal transfer of ARGs.

Biofilm formation as a method of improved treatment during anaerobic digestion of organic matter for biogas recovery

The efficiency of anaerobic digestion could be increased by promoting microbial retention through biofilm development. The inclusion of certain types of biofilm carriers has differentiated existing AD biofilm reactors through their respective mode of biofilm growth. Bacteria and archaea engaged in methanogenesis during anaerobic processes potentially build biofilms by adhering or attaching to biofilm carriers. Meta-analyzed results depicted varying degrees of biogas enhancement within AD biofilm reactors. Furthermore, different carrier materials highly induced the dynamicity of the dominant microbial population in each system. It is suggested that the promotion of surface contact and improvement of interspecies electron transport have greatly impacted the treatment results. Modern spectroscopy techniques have been and will continue to give essential information regarding biofilm's composition and structural organization which can be useful in elucidating the added function of this special layer of microbial cells.

Acylase enzymes disrupting quorum sensing alter the transcriptome and phenotype of Pseudomonas aeruginosa, and the composition of bacterial biofilms from wastewater treatment plants

Biofilms represent an essential way of life and colonization of new environments for microorganisms. This feature is regulated by quorum sensing (QS), a microbial communication system based on autoinducer molecules, such as N-acyl-homoserine lactones (AHLs) in Gram negative bacteria. In artificial ecosystems, like Wastewater Treatment Plants (WWTPs), biofilm attachment in filtration membranes produces biofouling. In this environment, the microbial communities are mostly composed of Gram-negative phyla. Thus, we used two AHLs-degrading enzymes, obtained from Actinoplanes utahensis (namely AuAAC and AuAHLA) to determine the effects of degradation of QS signals in the biofilm formation, among other virulence factors, of a Pseudomonas aeruginosa strain isolated from a WWTP, assessing molecular mechanisms through transcriptomics. Besides, we studied the possible effects on community composition in biofilms from activated sludge samples. Although the studied enzymes only degraded the AHLs involved in one of the four QS systems of P. aeruginosa, these activities produced the deregulation of the complete QS network. In fact, AuAAC -the enzyme with higher catalytic efficiency- deregulated all the four QS systems. However, both enzymes reduced the biofilm formation and pyocyanin and protease production. The transcriptomic response of P. aeruginosa affected QS related genes, moreover, transcriptomic response to AuAAC affected mainly to QS related genes. Regarding community composition of biofilms, as expected, the abundance of Gram-negative phyla was significantly decreased after enzymatic treatment. These results support the potential use of such AHLs-degrading enzymes as a method to reduce biofilm formation in WWTP membranes and ameliorate bacterial virulence.

Combining biofilm and membrane flocculation to enhance simultaneous nutrients removal and membrane fouling reduction

The stability and processing capacity of membrane bioreactor can be improved with long sludge retention time. However, phosphorus removal will be markedly reduced under long sludge retention time and membrane fouling will be aggravated. Adding aluminum (Al) salt is a common way to achieve chemical phosphorus removal and membrane fouling reduction. But, accumulated Al will cause the decline of metabolic activity of activated sludge. In this study, biofilm-membrane flocculation reactor was proposed to enhance simultaneous nutrients removal and membrane fouling reduction. It showed that the removal efficiencies of chemical oxygen demand (COD), ammonia nitrogen (NH₄⁺-N), total nitrogen (TN), and total phosphorus (TP) in biofilm-membrane flocculation reactor were 95.7%, 96.7%, 87.4%, and 97.2%, respectively. Compared with the control group, accumulated Al increased extracellular polymeric substances (EPS) secretion by 1.9%-35.4%, biofilm biomass by 12.4%-26.1%, and the activities of ammonia oxidation bacteria (AOB) and nitrite oxidation bacteria (NOB) in the biofilm increased by 42.9% and 65.9%, respectively. The relative abundance of Nitrospira, Dechloromonas, and Terrimonas in the biofilm increased by 1.78%, 3.01%, and 2.88%, respectively, which was conducive to facilitating the nitrification. Therefore, biofilm-membrane flocculation reactor is a promising way for enhancing simultaneous nutrients removal and membrane fouling reduction.

Preparation, characterization, and antibiofilm activity of cinnamic acid conjugated hydroxypropyl chitosan derivatives

In this study, cinnamic acid (CA) conjugated hydroxypropyl chitosan (HPCS) derivatives (HPCS-CA) with different degrees of substitution (DS) were successfully synthesized. The reaction was divided into two steps: the first step was to modify chitosan (CS) to HPCS, and the second step was to graft CA onto HPCS. Structural characterization and properties were carried out employing elemental analysis, Fourier transform infrared (FT-IR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy, nuclear magnetic resonance (NMR) spectra, X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The solubility test revealed the better water solubility of derivatives than CS. In addition, in vitro antibacterial and antibiofilm tests were performed. As expected, HPCS-CA derivatives exhibited good antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The MIC and MBC of HPCS-CA derivatives could reach 256 μg/mL and 512 μg/mL, respectively. Confocal laser scanning microscopy (CLSM) analysis proved the inhibitory effect of HPCS-CA derivatives on S. aureus and E. coli biofilms by disrupting the formation of biofilms, reducing the thickness of biofilms, and the number of live bacteria. These results suggest the potential applicability of HPCS-CA derivatives in the treatment of biofilm-associated infections and provide a practical strategy for the design of novel CS-based antibacterial materials.

Microbial biofilms in biorefinery - Towards a sustainable production of low-value bulk chemicals and fuels

Harnessing the potential of biocatalytic conversion of renewable biomass into value-added products is still hampered by unfavorable process economics. This has promoted the use of biofilms as an alternative to overcome the limitations of traditional planktonic systems. In this paper, the benefits and challenges of biofilm fermentations are reviewed with a focus on the production of low-value bulk chemicals and fuels from waste biomass. Our study demonstrates that biofilm fermentations can potentially improve productivities and product yields by increasing biomass retention and allowing for continuous operation at high dilution rates. Furthermore, we show that biofilms can tolerate hazardous environments, which improve the conversion of crude biomass under substrate and product inhibitory conditions. Additionally, we present examples for the improved conversion of pure and crude substrates into bulk chemicals by mixed microbial biofilms, which can benefit from microenvironments in biofilms for synergistic multi-species reactions, and improved resistance to contaminants. Finally, we suggest the use of mathematical models as useful tools to supplement experimental insights related to the effects of physico-chemical and biological phenomena on the process. Major challenges for biofilm fermentations arise from inconsistent fermentation performance, slow reactor start-up, biofilm carrier costs and carrier clogging, insufficient biofilm monitoring and process control, challenges in reactor sterilization and scale-up, and issues in recovering dilute products. The key to a successful commercialization of the technology is likely going to be an interdisciplinary approach. Crucial research areas might include genetic engineering combined with the development of specialized biofilm reactors, biofilm carrier development, in-situ biofilm monitoring, model-based process control, mixed microbial biofilm technology, development of suitable biofilm reactor scale-up criteria, and in-situ product recovery.

Untapped Potential of Moving Bed Biofilm Reactors with Different Biocarrier Types for Bilge Water Treatment: A Laboratory-Scale Study

Two labscale aerobic moving bed biofilm reactor (MBBR) systems, with a different type of biocarrier in each (K3 and Mutag BioChip), were operated in parallel for the treatment of real saline bilge water. During the operation, different stress conditions were applied in order to evaluate the performance of the systems: organic/hydraulic load shock (chemical oxygen demand (COD): 9 g L−1; hydraulic retention time (HRT): 48–72 h) and salinity shock (salinity: 40 ppt). At the same time, the microbiome in the biofilm and suspended biomass was monitored through 16S rRNA gene analysis in order to describe the changes in the microbial community. The dominant classes were Alphaproteobacteria (families Rhodospirillaceae and Rhodobacteraceae) and Bacteroidia (family Lentimicrobiaceae), being recorded at high relative abundance in all MBBRs. The structure of the biofilm was examined and visualized with scanning electron microscopy (SEM) analysis. Both systems exhibited competent performance, reaching up to 86% removal of COD under high organic loading conditions (COD: 9 g L−1). In the system in which K3 biocarriers were used, the attached and suspended biomass demonstrated a similar trend regarding the changes observed in the microbial communities. In the bioreactor filled with K3 biocarriers, higher concentration of biomass was observed. Biofilm developed on Mutag BioChip biocarriers presented lower biodiversity, while the few species identified in the raw wastewater were not dominant in the bioreactors. Through energy-dispersive X-ray (EDX) analysis of the biofilm, the presence of calcium carbonate was discovered, indicating that biomineralization occurred.

Biological fixed-film systems

The technical papers published in 2019 regarding wastewater treatment and microbial films were classified into two categories: biofilm and biofilm reactors. The biofilm category includes biofilm formation, biofilm consortia, bacterial signals, biofouling, extracellular polymeric substances, and biofilm membrane bioreactors. The biofilm reactors category provides recent information on rotating biological contactors, fluidized-bed biofilm reactors, integrated fixed-film activated sludge, moving-bed biofilm reactors, packed-bed biofilm reactors, sequencing biofilm batch reactors, and trickling filters.

The role of biofilm in the development and dissemination of ubiquitous pathogens in drinking water distribution systems: an overview of surveillance, outbreaks, and prevention

A variety of pathogenic microorganisms can survive in the drinking water distribution systems (DWDS) by forming stable biofilms and, thus, continually disseminating their population through the system's dynamic water bodies. The ingestion of the pathogen-contaminated water could trigger a broad spectrum of illnesses and well-being-related obstacles. These waterborne diseases are a significant concern for babies, pregnant women, and significantly low-immune individuals. This review highlights the recent advances in understanding the microbiological aspects of drinking water quality, biofilm formation and its dynamics, health issues caused by the emerging microbes in biofilm, and approaches for biofilm investigation its prevention and suppression in DWDS.

Ways to control harmful biofilms: prevention, inhibition, and eradication

Biofilms are complex microbial architectures that encase microbial cells in a matrix comprising self-produced extracellular polymeric substances. Microorganisms living in biofilms are much more resistant to hostile environments than their planktonic counterparts and exhibit enhanced resistance against the microbicides. From the human perspective, biofilms can be classified into beneficial, neutral, and harmful. Harmful biofilms impact food safety, cause plant and animal diseases, and threaten medical fields, making it urgent to develop effective and robust strategies to control harmful biofilms. In this review, we discuss various strategies to control biofilm formation on infected tissues, implants, and medical devices. We classify the current strategies into three main categories: (i) changing the properties of susceptible surfaces to prevent biofilm formation; (ii) regulating signalling pathways to inhibit biofilm formation; (iii) applying external forces to eradicate the biofilm. We hope this review would motivate the development of innovative and effective strategies for controlling harmful biofilms.

Bacterial assembly during the initial adhesion phase in wastewater treatment biofilms

Biofilm start-up is a critical and time-consuming process in moving bed biofilm reactors (MBBRs), with the procedure beginning with bacteria being statically bound on surfaces. Studies addressing this critical process have mainly focused on constructing models based on single strains, although consideration of the unstable adhesion process of structured bacterial communities remains underexplored. In this study, impedance based real-time cell analysis (RTCA) was employed to quantitatively characterize the unstable adhesion process of structured bacterial communities collected from the aerobic tanks of eight full-scale wastewater treatment plants (WWTPs). The unstable adhesion time ranged from 8.85 ± 1.53 h to 17.06 ± 0.64 h, indicating significant differences in bacterial colonization properties. Using principal components analysis (PCA), Na⁺, K⁺ and proteins were found to significantly influence the biofilm unstable adhesion process. Furthermore, the differences in unstable adhesion times were closely related to the abundance of the most abundant operational taxonomic units (OTUs). The dominant OTUs mainly belonged to Aeromonadaceae and Enterobacteriaceae, with 73% found to be negatively corelated with unstable adhesion time. Furthermore, bacterial assembly during the initial adhesion phase was driven by bacterial interactions and key OTUs (exhibiting maximum connectivity in phylogenetic molecular ecological networks (pMENs)). Analysis of pMENs indicated that bacterial cooperation was a dominant factor in the initial adhesion, which may involve bacterial co-colonization, co-aggregation and communication. Considering keystone taxa were not identified, OTUs with max connectivity in pMENs were considered as key species. Although these key species play important roles in the connection of networks, their relative abundances were low and no significant relationships were observed with the unstable adhesion time. Overall, unstable adhesion in MBBRs is regulated by the dominant bacterial species and the alleviation of environmental variables by repulsive forces, providing potential strategies of dosing quorum sensing signals and key cations at the initial adhesion phase in reactors, to facilitate initial biofilm formation.

Acceleration of biofilm formation in start-up of sequencing batch biofilm reactor using carriers immobilized with Pseudomonas stutzeri strain XL-2

P. stutzeri strain XL-2 initially immobilized on polypropylene carriers accelerated the biofilm formation in start-up of sequencing batch biofilm reactor (SBBR) (denoted R1). The biofilm formation in R1 was approximately completed in 36 days, which was shorter than that of 48 days in an identical SBBR (denoted R2) without strain XL-2. Meanwhile, R1 presented a rapid stabilization of NH₄⁺-N and TN removal to 81.7% and 72.4% respectively. Surface plasmon resonance demonstrated that strain XL-2 enhanced the initial adhesion of carrier surface due to the production of extracellular polymeric substances (EPS), which made it easier for other EPS-producing strains, such as Thauera and Flavobacterium, to adhere to the carriers. PICRUSt revealed that biofilm in R1 presented relatively higher activity of EPS biosynthesis enzymes (glycosyltransferase and asparagine synthase). Thus, high EPS content was obtained due to the application of carriers immobilized with strain XL-2 and finally promoted the biofilm formation.

Beyond Risk: Bacterial Biofilms and Their Regulating Approaches

Bacterial biofilms are complex surface attached communities of bacteria held together by self-produced polymer matrixs mainly composed of polysaccharides, secreted proteins, and extracellular DNAs. Bacterial biofilm formation is a complex process and can be described in five main phases: (i) reversible attachment phase, where bacteria non-specifically attach to surfaces; (ii) irreversible attachment phase, which involves interaction between bacterial cells and a surface using bacterial adhesins such as fimbriae and lipopolysaccharide (LPS); (iii) production of extracellular polymeric substances (EPS) by the resident bacterial cells; (iv) biofilm maturation phase, in which bacterial cells synthesize and release signaling molecules to sense the presence of each other, conducing to the formation of microcolony and maturation of biofilms; and (v) dispersal/detachment phase, where the bacterial cells depart biofilms and comeback to independent planktonic lifestyle. Biofilm formation is detrimental in healthcare, drinking water distribution systems, food, and marine industries, etc. As a result, current studies have been focused toward control and prevention of biofilms. In an effort to get rid of harmful biofilms, various techniques and approaches have been employed that interfere with bacterial attachment, bacterial communication systems (quorum sensing, QS), and biofilm matrixs. Biofilms, however, also offer beneficial roles in a variety of fields including applications in plant protection, bioremediation, wastewater treatment, and corrosion inhibition amongst others. Development of beneficial biofilms can be promoted through manipulation of adhesion surfaces, QS and environmental conditions. This review describes the events involved in bacterial biofilm formation, lists the negative and positive aspects associated with bacterial biofilms, elaborates the main strategies currently used to regulate establishment of harmful bacterial biofilms as well as certain strategies employed to encourage formation of beneficial bacterial biofilms, and highlights the future perspectives of bacterial biofilms.

An Innovative in Situ Monitoring of Sulfate Reduction within a Wastewater Biofilm by H2S and SO42- Microsensors

Microelectrodes can be used to obtain chemical profiles within biofilm microenvironments. For example, sulfate (SO₄^2-) and hydrogen sulfide (H₂S) microelectrodes can be used to study sulfate reduction activity in this context. However, there is no SO₄^2- microelectrode available for studying sulfate reduction in biofilms. In this study, SO₄^2- and H₂S microelectrodes were fabricated and applied in the measurement of a wastewater membrane-aerated biofilm (MAB) to investigate the in situ sulfate reduction activity. Both the SO₄^2- and H₂S microelectrodes with a tip diameter of around 20 micrometers were successfully developed and displayed satisfying selectivity to SO₄^2- and H₂S, respectively. The Nernstian slopes of calibration curves of the fabricated SO₄^2- electrodes were close to -28.1 mV/decade, and the R² values were greater than 98%. Within the selected concentration range from 10^-5 M (0.96 mg/L) to 10^-2 M (960 mg/L), the response of the SO₄^2- microelectrode was log-linearly related to its concentration. The successfully fabricated SO₄^2- microelectrode was combined with the existing H₂S microelectrode and applied on an environmental wastewater biofilm sample to investigate the sulfate reduction activity within it. The H₂S and SO₄^2- microelectrodes showed stable responses and good performance, and the decrease of SO₄^2- with an accompanying increased of H₂S within the biofilm indicated the in situ sulfate reduction activity. The application of combined SO₄^2- and H₂S microelectrodes in wastewater biofilms could amend the current understanding of sulfate reduction and sulfur oxidation within environmental biofilms based on only H₂S microelectrodes.

Detecting Escherichia coli Biofilm Development Stages on Gold and Titanium by Quartz Crystal Microbalance

Bacterial biofilms are responsible for persistent infections and biofouling, raising serious concerns in both medical and industrial processes. These motivations underpin the need to develop methodologies to study the complex biological structures of biofilms and prevent their formation on medical implants, tools, and industrial apparatuses. Here, we report the detailed comparison of Escherichia coli biofilm development stages (adhesion, maturation, and dispersion) on gold and titanium surfaces by monitoring the changes in both frequency and dissipation of a quartz crystal microbalance (QCM) device, a cheap and reliable microgravimetric sensor which allows the real-time and label-free characterization of various stages of biofilm development. Although gold is the most common electrode material used for QCM sensors, the titanium electrode is also readily available for QCM sensors; thus, QCM sensors with different metal electrodes serve as a simple platform to probe how pathogens interact with different metal substrates. The QCM outcomes are further confirmed by atomic force microscopy and crystal violet staining, thus validating the effectiveness of this surface sensitive sensor for microbial biofilm research. Moreover, because QCM technology can easily modify the substrate types and coatings, QCM sensors also provide well-controlled experimental conditions to study antimicrobial surface treatments and eradication procedures, even on mature biofilms.

A novel start-up strategy for mixotrophic denitrification biofilters by rhamnolipid and its performance on denitrification of low C/N wastewater

A novel start-up strategy for sulfur-based mixotrophic denitrification biofilters (mDNBFs) by rhamnolipid was investigated for the first time. Rhamnolipid with gradient concentrations (0-120 mg/L) was added into five lab-scale mDNBFs. Results showed that rhamnolipid could promote biomass yield and nitrogen removal rate (NRR) by 71.7% and 68.7%, respectively, while its effect on EPS and adhesion force was concentration-dependent. The spatial distribution characteristics of microbial communities demonstrated the enrichment of main heterotrophic denitrifying bacteria outcompeted that of the autotrophs, with a more pronounced difference in high concentration rhamnolipid-treated mDNBFs. Furthermore, highest abundance of napA, narG, nirK and nosZ genes was observed in 80 mg/L rhamnolipid-treated mDNBF. Interfacial processes including solubilizing effect and hydration repulse and variations of organics were discussed to explicate the underlying mechanism. The study enlightened that an appropriate concentration (∼80 mg/L) of rhamnolipid may be a good solution for accelerating biofilm formation and enriching denitrifying bacteria to promote denitrification performance of mDNBFs treating low C/N wastewater.

Undesirable effects of exogenous N-acyl homoserine lactones on moving bed biofilm reactor treating medium-strength synthetic wastewater

Exogenous AHLs are gradually reported to facilitate biofilm growth, however, whether they play a universal role in promoting biofilm formation and pollutants removal remains to be investigated. The pollutant removal, biofilm properties, microbial community and the distribution of AHLs were investigated in three lab-scale MBBRs by continuous dosing 100 nM N-Hexanoyl-L-homoserine lactone (C6-HSL) and N-Octanoyl-L-homoserine lactone (C8-HSL) in synthetic wastewater under normal nutrition (40 mg/L NH₄⁺-N with C/N = 20). Results showed that adding AHLs didn't affect organics removal and exogenous C6-HSL even significantly suppressed NH₄⁺-N removal by 0.44-20.29% after 16 days (p < 0.05). The introduction of AHLs both facilitated biofilm growth and extracellular polymeric substances secretion while suppressed ATP production especially during the stable operation period, with 48.96% by C6-HSL (p < 0.05) and 27.25% by C8-HSL, respectively. Exogenous AHLs inhibited the proliferation of Chryseobacterium, resulting in improvement in biofilm growth and it probably mediated ATP synthesis through regulating the release of 3OHC12-HSL in aqueous phase. Organics removal and biofilm growth were mainly attributed to the combined actions of multitudinous AHLs in biofilm phase rather than that in aqueous phase. The counterintuitive conclusions obtained in this study highlighted the importance of legitimately applying exogenous AHLs to accelerate biofilm formation and the start-up of MBBR in wastewater treatment.

Role of extracellular polymeric substances in biofilm formation by Pseudomonas stutzeri strain XL-2

Pseudomonas stutzeri strain XL-2 exhibited significant performance on biofilm formation. Extracellular polymeric substances (EPS) secreted by strain XL-2 were characterized by colorimetry and Fourier transform infrared (FT-IR) spectroscopy. The biofilm growth showed a strong positive correlation (r_P=0.96, P<0.01) to extracellular protein content, but no correlation to exopolysaccharide content. Hydrolyzing the biofilm with proteinase K caused a significant decrease in biofilm growth (t=3.7, P<0.05), whereas the changes in biofilm growth were not significant when the biofilm was hydrolyzed by α-amylase and β-amylase, implying that proteins rather than polysaccharides played the dominant role in biofilm formation. More specifically, confocal laser scanning microscopy (CLSM) revealed that the extracellular proteins were tightly bound to the cells, resulting in the cells with EPS presenting more biofilm promotion protein secondary structures, such as three-turn helices, β-sheet, and α-helices, than cells without EPS. Both bio-assays and quantitative analysis demonstrated that strain XL-2 produced signal molecules of N-acylhomoserine lactones (AHLs) during biofilm formation process. The concentrations of C₆-HLS and C₆-oxo-HLS were both significantly positively correlated with protein contents (P<0.05). Dosing exogenous C₆-HLS and C₆-oxo-HLS also resulted in the increase in protein content. Therefore, it was speculated that C₆-HLS and C₆-oxo-HLS released by strain XL-2 could up-regulate the secretion of proteins in EPS, and thus promote the formation of biofilm.

Enhanced biofilm formation and denitrification in biofilters for advanced nitrogen removal by rhamnolipid addition

Denitrification biofilters (DNBFs) are widely used in advanced nitrogen removal of wastewater with low C/N and effective biofilm formation is critical to their long-term operation. Hereby the influence of rhamnolipid addition in DNBFs was investigated for the first time. Gradient concentrations (0, 20, 40, 80, 120 mg/L) of rhamnolipid were applied to investigate nitrogen removal, biofilm properties and microbial community of lab-scale DNBFs. A significant increase of nitrogen removal was observed in rhamnolipid-treated DNBFs (p < 0.05). Total solid (TS), extracellular polymeric substances (EPS) and adhesion force of biofilms in DNBF with 120 mg/L rhamnolipid reached the maximum, which were 2.17, 2.15 and 3.36 times of those in the control, respectively. Moreover, rhamnolipid exhibited an improvement in abundance of Simplicispira and Gemmatimonas which were responsible for enhanced biofilm formation and denitrification. The results suggested that rhamnolipid addition can be a novel strategy to improve the start-up and denitrification performance of DNBFs.

Biofilms: The Microbial "Protective Clothing" in Extreme Environments

Microbial biofilms are communities of aggregated microbial cells embedded in a self-produced matrix of extracellular polymeric substances (EPS). Biofilms are recalcitrant to extreme environments, and can protect microorganisms from ultraviolet (UV) radiation, extreme temperature, extreme pH, high salinity, high pressure, poor nutrients, antibiotics, etc., by acting as "protective clothing". In recent years, research works on biofilms have been mainly focused on biofilm-associated infections and strategies for combating microbial biofilms. In this review, we focus instead on the contemporary perspectives of biofilm formation in extreme environments, and describe the fundamental roles of biofilm in protecting microbial exposure to extreme environmental stresses and the regulatory factors involved in biofilm formation. Understanding the mechanisms of biofilm formation in extreme environments is essential for the employment of beneficial microorganisms and prevention of harmful microorganisms.