Improvement of microbial strains and fermentation processes

The halo of future bio-industry based on engineering Halomonas

The utilization of microorganisms to transform biomass into biofuels and biochemicals presents a viable and competitive alternative to conventional petroleum refining processes. Halomonas species are salt-tolerant and alkaliphilic, endowed with various beneficial properties rendering them as contamination resistant platforms for industrial biotechnology, facilitating the commercial-scale production of valuable bioproducts. Here we summarized the metabolic and genomic engineering approaches, as well as the biochemical products synthesized by Halomonas. Methods were presented for expanding substrates utilization in Halomonas to enhance its capabilities as a robust workhorse for bioproducts. In addition, we briefly reviewed the Next Generation Industrial Biotechnology (NGIB) based on Halomonas for open and continuous fermentation. In particular, we proposed the industrial attempts from Halomonas chassis and the rising prospects and essential strategies to enable the successful development of Halomonas as microbial NGIB manufacturing platforms.

Bioprospecting endophytic fungi of forest plants for their monoamine oxidase A and cholinesterases inhibitors, and peroxisome proliferator-activated receptor gamma agonists

AIMS

The urgent search for new natural bioactive compounds is crucial to address growing clinical demands. With this perspective, this paper focuses on isolating and bioprospecting fungal endophytes from some plant species in a local forest in Wrocław, Poland.

METHODS AND RESULTS

Forty-three fungal endophytes were isolated and their extracts were tested for inhibitory potential against monoamine oxidase A (MAO-A), acetylcholinesterase (AChE), butyrylcholinesterase (BChE), and for peroxisome proliferator-activated receptor gamma (PPAR-γ) agonists. Six promising strains after screening were identified to possess all these activities. These strains and their respective plant hosts were Sphaeropsis sapinea BUK-L2 (Fagus sylvatica), Coniochaeta velutina SW-B (Picea abies), Epicoccum nigrum COR-B (Corylus avellana), Paraphaeosphaeria verruculosa JAR-B (Sorbus aucuparia), Umbelopsis isabellina COR-L1 (Corylus avellana), and Epicoccum mezzettii QR-B (Quercus robur). Moreover, gamma irradiation at several doses (Gy) was separately applied to the fungal cultures to study their enhancement effects on the recorded activities. Finally, compounds of active bands from preparative thin-layer chromatography of the two promising strains (Coniochaeta velutina SW-B and Epicoccum nigrum COR-B), were identified by GC-MS (Gas chromatography-mass spectrometry).

CONCLUSIONS

The present study is the first report on bioprospecting endophytic fungi of forest plants for the aforementioned activities.

Role of non-genetically modified or native pentose fermenting microorganisms in establishing viable lignocellulosic biorefineries in the Brazilian context

Brazil can play a pivotal role in the development of a circular bioeconomy as the country ranks among the top five major agricultural countries in the world producing a foreseeable lignocellulosic biomass from crops, such as sugarcane, soybean, corn, rice, coffee, and eucalyptus. Considering that pentose sugars (C5 sugars) represent 20%-35% of the amount of lignocellulosic biomass components, these sugars have a great potential in the development of carbon neutral economy. From the biomass conversion economic point of view, the conversion of hemicellulose into renewable products with a satisfactory yield is the most needed. However, the biochemical conversion of pentose sugars is challenging due to the scarcity of native pentose sugars fermenting microorganisms. While recent advances in metabolic engineering have been effective in developing a strong molecular chassis for efficient pentose sugars conversion, the yields, productivities, and stability of the genetically modified organisms (GMOs) are major limiting factors for industrial-scale applications. Native lignocellulosic sugars fermenting microorganisms are competent, robust, and inhibitor-tolerant but their lower productivities continue to be a big concern. This article explains the inherent characteristics of native pentose fermenting microorganisms in establishing viable lignocellulosic biorefineries in the Brazilian context, with a special focus on their isolation from Brazilian biodiversity, along with the evaluation of nongenetic engineering techniques to improve strains for biorefinery application.

Improving natural red pigment production by Streptomyces phaeolivaceus strain GH27 for functionalization of textiles with in silico ADME prediction

The red pigment was recovered from the S. phaeolivaceus GH27 isolate, which was molecularly identified using 16S rRNA gene sequencing and submitted to GenBank as OQ145635.1. The ideal growth conditions included 1% (w/v) starch, diammonium citrate, dibasic sodium phosphate, 5% (v/v) inoculum, pH 8, a rotation speed of 150 rpm, a temperature of 37 °C, and an incubation period of 9 days. Using ethanol as a solvent, the red pigment was effectively recovered. Data indicates that pigment content remained steady at 40 and 50 °C. Heating the pigment extract to 60, 70, 80, 90, and 100 °C for one hour results in pigment retention of 98%, 96.5%, 95.5%, 94.6%, and 92.6% of its pigment density, respectively. Studies indicate that the pigment extracts exhibited optimal stability at alkaline pH levels. The findings demonstrate that the red pigment extract has a peak absorbance range of 280-340 nm, with a λmax of 300 nm. GC/MS analysis revealed that the primary components of the pigment extract were linolenic acid methyl ester and oleic acid methyl ester, constituting 26.41% and 25.25%, respectively. Fabrics dyed with extracted red pigment exhibit excellent fastness when using the comprehensive green method. In comparison to conventional and nanotechnological attributes, printed samples exhibit significant color strength without environmental repercussions. The treatment of cotton, wool, and polyester samples suppressed pathogen growth to differing extents. Polyester had the most important inhibitory effects on Staphylococcus aureus (50.03%) and Bacillus cereus (39.49%). The ADME physicochemical properties of the predominant medication were assessed, together with its bioavailability. The radar plot demonstrated ideal parameters for size, polarity, lipophilicity, solubility, and saturation, excluding flexibility. It exhibited intermediate synthetic accessibility, exceptional permeability and absorption, elevated gastrointestinal absorption, and blood-brain barrier penetration; nonetheless, it did not adhere to the medicinal chemistry rule of three.

Directed Evolution of Microbial Communities in Fermented Foods: Strategies, Mechanisms, and Challenges

Directed Evolution of Microbial Communities (DEMC) offers a promising approach to enhance the functional attributes of microbial consortia in fermented foods by mimicking natural selection processes. This review details the application of DEMC in fermented foods, focusing on optimizing community traits to improve both fermentation efficiency and the sensory quality of the final products. We outline the core techniques used in DEMC, including the strategic construction of initial microbial communities, the systematic introduction of stress factors to induce desirable traits, and the use of artificial selection to cultivate superior communities. Additionally, we explore the integration of genomic tools and dynamic community analysis to understand and guide the evolutionary trajectories of these communities. While DEMC shows substantial potential for refining fermented food products, it faces challenges such as maintaining genetic diversity and functional stability of the communities. Looking ahead, the integration of advanced omics technologies and computational modeling is anticipated to significantly enhance the predictability and control of microbial community evolution in food fermentation processes. By systematically improving the selection and management of microbial traits, DEMC serves as a crucial tool for enhancing the quality and consistency of fermented foods, directly contributing to more robust and efficient food production systems.

Detection and molecular insights into the azurin gene expression post- gamma irradiation in P. aeruginosa

Azurin, a secondary metabolite from Pseudomonas aeruginosa, has attracted much attention owing to its valuable therapeutic and biological applications. This work aimed to study and chartly maximize the azurin production process using different doses of gamma irradiation (5-400 Gy) in P. aeruginosa isolates. Seventy-six P. aeruginosa isolates were sourced from 135 environmental samples and 35 clinical bacterial isolates with the following descending order: 35 isolates (46%) from clinical samples, 26 isolates (34%) from water samples, and 15 isolates (20%) from soil samples. The disc diffusion technique was used for antimicrobial susceptibility testing, revealing that the multidrug-resistant (MDR) rate among all collected isolates according to the criteria determined by Clinical and Laboratory Standards Institute (CLSI) was 54 (71%). The genomic experimental results revealed that only 37 MDR isolates tested positive for the azurin gene, as detected by the PCR product at 446 bp. These findings were further supported by FTIR analysis, which revealed peaks around 1636.96 cm- 1, indicating a prominent α-helix secondary structure of azurin in these isolates. Related to their pathogenicity and antibiotic resistance, isolates from clinical origin exhibited the higher azurin gene expression level. Besides, this study confirmed the potency of gamma radiation exposure at 50 and 100 Gy significantly increased the azurin expression levels in three tested clinical isolates (P ≤ 0.05), with a maximum fold expression level of 63.55 compared to the non-irradiated samples. In conclusion, low doses of gamma irradiation effectively enhanced expression level of a secondary metabolite azurin, providing a considerable benefit for subsequent purification processes in both biological and medical applications.

Bioprospecting Endophytic Fungi of Forest Plants for Bioactive Metabolites with Antibacterial, Antifungal, and Antioxidant Potentials

The growing emergence of multi-drug resistant microbial strains has kept the scientific world searching for novel bioactive compounds with specific chemical characteristics. Accordingly, researchers have started exploring the understudied metabolites from endophytes as a new source of bioactive compounds. In this context, the current study was designed to evaluate the bioactive properties of endophytic fungi from the Mokrzański forest in Wrocław, Poland that have not yet been fully researched. Forty-three endophytic fungi were isolated from twelve distinct plants. Following their cultivation, fungal extracts were separately prepared from biomass and cell-free filtrates, and their antibacterial, antifungal (against human and plant pathogens), and antioxidant properties were examined. Five promising fungi after screening were identified to possess all of these activities. These strains and their respective plant hosts were Trichoderma harzianum BUK-T (Fagus sylvatica), Aspergillus ochraceus ROB-L1 (Robinia pseudoacacia), Chaetomium cochliodes KLON-L1, Fusarium tricinctum KLON-L2 (Acer platanoides), and Penicillium chrysogenum SOS-B2 (Pinus sylvestris). Moreover, gamma irradiation at several doses (Gy) was separately applied to the fungal cultures to study their effects on the recorded activities. Finally, compounds after preparative thin-layer chromatography fractionation of the five fungal strains were identified by GC-MS. These findings suggest that the isolated endophytic fungi could serve as novel sources of bioactive metabolites with antibacterial, antifungal, and antioxidant properties, potentially paving the way for future research and the development of new bioactive compounds.

Chlorella vulgaris-mediated bioremediation of food and beverage wastewater from industries in Mexico: Results and perspectives towards sustainability and circular economy

The food and beverage industries in Mexico generate substantial effluents, including nejayote, cheese-whey, and tequila vinasses, which pose significant environmental challenges due to their extreme physicochemical characteristics and excessive organic load. This study aimed to assess the potential of Chlorella vulgaris in bioremediating these complex wastewaters while also producing added-value compounds. A UV mutagenesis treatment (40 min) enhanced C. vulgaris adaptability to grow in the effluent conditions. Robust growth was observed in all three effluents, with nejayote identified as the optimal medium. Physicochemical measurements conducted pre- and post-cultivation revealed notable reductions of pollutants in nejayote, including complete removal of nitrogen and phosphates, and an 85 % reduction in COD. Tequila vinasses exhibited promise with a 66 % reduction in nitrogen and a 70 % reduction in COD, while cheese-whey showed a 17 % reduction in phosphates. Regarding valuable compounds, nejayote yielded the highest pigment (1.62 mg·g-1) and phenolic compound (3.67 mg·g-1) content, while tequila vinasses had the highest protein content (16.83 %). The main highlight of this study is that C. vulgaris successfully grew in 100 % of the three effluents (without additional water or nutrients), demonstrating its potential for sustainable bioremediation and added-value compound production. When grown in 100 % of the effluents, they become a sustainable option since they don't require an input of fresh water and therefore do not contribute to water scarcity. These findings offer a practical solution for addressing environmental challenges in the food and beverage industries within a circular economy framework.

Poly-γ-glutamic acid overproduction of Bacillus licheniformis ATCC 9945a by developing a novel optimum culture medium and glutamate pulse feeding using different experimental design approaches

The commercial production of multifunctional, biocompatible, and biodegradable biopolymers such as poly-γ-glutamic acid via microbial fermentation requires the development of simple and cheap methods for mass production. This study optimized the poly-γ-glutamic acid production of Bacillus licheniformis ATCC 9945a in several steps. At first, the most critical components of the culture medium, including l-glutamic acid, citric acid, and glycerol, were selected by screening nine factors through the Plackett-Burman experimental design and then were optimized using the response surface method and the central composite design algorithm. Under optimal conditions, the production of poly-γ-glutamic acid increased by more than 4.2 times from 11.2 to 47.2 g/L. This is one of the highest production rates of this strain in submerged batch fermentation reported so far using the optimized medium compared to the conventional base medium. A novel and efficient sudden pulse feeding strategy (achieved by a novel one-factorial statistical technique) of l-glutamic acid to the optimized medium increased biopolymer production from 47.2 to 66.1 g/L, the highest value reported in published literature with this strain. This simple, reproducible, and cheap fermentation process can considerably enhance the commercial applications of the poly-γ-glutamic acid synthesized by B. licheniformis ATCC 9945a.

Characterization of yeast mutant strains for starter culture in Arabica coffee fermentation

Arabica coffee is the most popular and best-selling type of coffee. During coffee fermentation, microorganisms are essential for the production of metabolites and volatile compounds that affect coffee flavor quality. This work aimed to study the mutation, selection, and characterization of the Wickerhamomyces anomalus strain YWP1-3 as a starter culture to enhance the flavor quality of Arabica coffee. The results revealed that six mutants could produce relatively high levels of the pectinase enzyme on pectin agar media and exhibited high activity levels, ranging from 332.35 to 415.88 U/ml in mucilage broth. Strains UV22-2, UV22-3, UV41-1 and UV32-1 displayed higher levels of amylase activity than did the wild type. The UV22-2 and UV22-3 mutants exhibited the highest pectin degradation indices of 49.22% and 45.97%, respectively, and displayed significantly enhanced growth rates in nitrogen yeast base media supplemented with various sugars; thus, these mutants were evaluated for their ability to serve as a starter for fermentation of Arabica coffee. The cupping scores of coffees derived from UV22-2 and UV22-3 were 83.5 ± 1.5 and 82.0 ± 2.14, respectively. The volatile compounds in the roasted coffee fermented by UV22-2 were analyzed by GC‒MS, which revealed higher levels of furfuryl alcohol and furfuryl acetate than did the other samples. These findings suggested that UV22-2 could be an influential starter culture for Arabica coffee fermentation.

Influence of medium modifications (optimization) on high nematicidal activity of the fermentation broth of Clostridium beijerinckii

Introduction: The nematode species Meloidogyne incognita has been responsible for significant financial losses within the agricultural sector. Nematophagous bacteria, characterised by their extensive distribution and broad spectrum of hosts, exhibit remarkable efficacy as natural antagonists against nematodes. Sneb518 (Clostridium beijerinckii) fermentation broth displayed substantial biocontrol activity against M. incognita in previous research. Optimizing fermentation conditions is a fundamental technique for dramatically enhancing end product performance. There has been no such study conducted yet on enhancing the nematicidal activities of Sneb518 (Clostridium beijerinckii) fermentation using response surface methodology (RSM). Methods: The influence of strain Sneb518 fermentation media and conditions on nematicidal activity was examined using the three-factor technique and a Plackett-Burman design, and the interaction between various fermentation factors was examined using a Box-Behnken design. The present study employed response surface methodology (RSM) to examine and enhance the nematicidal activity of Sneb518 culture filtrates by identifying and optimising the influential components. Results: Glucose, peanut cake flour, and potassium chloride as carbon, nitrogen, and inorganic salts displayed considerably increased nematicidal potential in the present study. Furthermore, the corrected mortality of J2 ranged from 52.24% to 91.15% when utilizing the Box-Behnken design. These findings clearly support the application of RSM for medium optimization. Moreover, the outcomes of the validation experiment corresponded to the model predictions. Discussion: This research has enhanced the biocontrol ability of C. beijerinckii to control M. incognita and this research has led to the advancement of new biocontrol agents.

Random mutagenesis as a tool for industrial strain improvement for enhanced production of antibiotics: a review

Secondary metabolites are produced by microbes in minimal quantities in the natural environment out of necessity. However, in the pharmaceutical industry, their overproduction becomes essential. To achieve higher yields, genetic modifications are employed to create strains that surpass the productivity of the initially isolated strains. While rational screening and genetic engineering have emerged as valuable practices in recent years, the cost-effective technique of mutagenesis and selection, known as "random screening," remains a preferred method for efficient short-term strain development. This review aims to comprehensively explore all aspects of strain improvement, focusing on why random mutagenesis continues to be widely adopted.

Deuterated water as a substrate-agnostic isotope tracer for investigating reversibility and thermodynamics of reactions in central carbon metabolism

Stable isotope tracers are a powerful tool for the quantitative analysis of microbial metabolism, enabling pathway elucidation, metabolic flux quantification, and assessment of reaction and pathway thermodynamics. 13C and 2H metabolic flux analysis commonly relies on isotopically labeled carbon substrates, such as glucose. However, the use of 2H-labeled nutrient substrates faces limitations due to their high cost and limited availability in comparison to 13C-tracers. Furthermore, isotope tracer studies in industrially relevant bacteria that metabolize complex substrates such as cellulose, hemicellulose, or lignocellulosic biomass, are challenging given the difficulty in obtaining these as isotopically labeled substrates. In this study, we examine the potential of deuterated water (2H2O) as an affordable, substrate-neutral isotope tracer for studying central carbon metabolism. We apply 2H2O labeling to investigate the reversibility of glycolytic reactions across three industrially relevant bacterial species -C. thermocellum, Z. mobilis, and E. coli-harboring distinct glycolytic pathways with unique thermodynamics. We demonstrate that 2H2O labeling recapitulates previous reversibility and thermodynamic findings obtained with established 13C and 2H labeled nutrient substrates. Furthermore, we exemplify the utility of this 2H2O labeling approach by applying it to high-substrate C. thermocellum fermentations -a setting in which the use of conventional tracers is impractical-thereby identifying the glycolytic enzyme phosphofructokinase as a major bottleneck during high-substrate fermentations and unveiling critical insights that will steer future engineering efforts to enhance ethanol production in this cellulolytic organism. This study demonstrates the utility of deuterated water as a substrate-agnostic isotope tracer for examining flux and reversibility of central carbon metabolic reactions, which yields biological insights comparable to those obtained using costly 2H-labeled nutrient substrates.

Modeling and optimization of antibacterial effect of lichen-associated bacteria, Bacillus subtilis KSRLAB3 strain against marine fouling bacteria, Vibrio alginolyticus

One of the most commonly occurring bacteria, Bacillus subtilis, can produce a wide variety of secondary metabolites. In this study, the antimicrobial effect of B. subtilis KSRLAB3 against Vibrio alginolyticus was optimized using the Plackett-Burman design (PBD) method, response surface methodology (RSM), and genetic algorithm (GA). Initially, the effects of carbon source, nitrogen source, NaCl concentration, pH, temperature, and incubation time on antimicrobial effects were studied. Among the carbon and nitrogen sources investigated, mannose and peptone elicited maximum antimicrobial effect. Using PBD, the most significant variables that influence the antimicrobial effect were identified, including incubation time, peptone concentration, and temperature. The optimum conditions required for attaining maximum antimicrobial effect was identified using the RSM-GA hybrid method, and the optimum condition includes 49.999 h of incubation time, 4.39 g/L of peptone concentration, and 27.629°C of incubation temperature. The confirmatory experiments performed around the optimum condition showed a zone of inhibition of 35 ± 0.52 mm. Methanolic extract also proved the presence of antibacterial lipopeptide surfactin. Therefore, the RSM-GA hybrid method was successfully used in this study to model the antimicrobial effect of B. subtilis KSRLAB3 against V. alginolyticus. The effective inhibition of V. alginolyticus can be investigated further for the development of antifouling coatings.

Strategies for the Development of Industrial Fungal Producing Strains

The use of microorganisms in industry has enabled the (over)production of various compounds (e.g., primary and secondary metabolites, proteins and enzymes) that are relevant for the production of antibiotics, food, beverages, cosmetics, chemicals and biofuels, among others. Industrial strains are commonly obtained by conventional (non-GMO) strain improvement strategies and random screening and selection. However, recombinant DNA technology has made it possible to improve microbial strains by adding, deleting or modifying specific genes. Techniques such as genetic engineering and genome editing are contributing to the development of industrial production strains. Nevertheless, there is still significant room for further strain improvement. In this review, we will focus on classical and recent methods, tools and technologies used for the development of fungal production strains with the potential to be applied at an industrial scale. Additionally, the use of functional genomics, transcriptomics, proteomics and metabolomics together with the implementation of genetic manipulation techniques and expression tools will be discussed.

Development of a chemically defined medium for Paenibacillus polymyxa by parallel online monitoring of the respiration activity in microtiter plates

BACKGROUND

One critical parameter in microbial cultivations is the composition of the cultivation medium. Nowadays, the application of chemically defined media increases, due to a more defined and reproducible fermentation performance than in complex media. In order, to improve cost-effectiveness of fermentation processes using chemically defined media, the media should not contain nutrients in large excess. Additionally, to obtain high product yields, the nutrient concentrations should not be limiting. Therefore, efficient medium optimization techniques are required which adapt medium compositions to the specific nutrient requirements of microorganisms.

RESULTS

Since most Paenibacillus cultivation protocols so far described in literature are based on complex ingredients, in this study, a chemically defined medium for an industrially relevant Paenibacillus polymyxa strain was developed. A recently reported method, which combines a systematic experimental procedure in combination with online monitoring of the respiration activity, was applied and extended to identify growth limitations for Paenibacillus polymyxa. All cultivations were performed in microtiter plates. By systematically increasing the concentrations of different nutrient groups, nicotinic acid was identified as a growth-limiting component. Additionally, an insufficient buffer capacity was observed. After optimizing the growth in the chemically defined medium, the medium components were systematically reduced to contain only nutrients relevant for growth. Vitamins were reduced to nicotinic acid and biotin, and amino acids to methionine, histidine, proline, arginine, and glutamate. Nucleobases/-sides could be completely left out of the medium. Finally, the cultivation in the reduced medium was reproduced in a laboratory fermenter.

CONCLUSION

In this study, a reliable and time-efficient high-throughput methodology was extended to investigate limitations in chemically defined media. The interpretation of online measured respiration activities agreed well with the growth performance of samples measured in parallel via offline analyses. Furthermore, the cultivation in microtiter plates was validated in a laboratory fermenter. The results underline the benefits of online monitoring of the respiration activity already in the early stages of process development, to avoid limitations of medium components, oxygen limitation and pH inhibition during the scale-up.

Atmospheric and Room Temperature Plasma (ARTP) Mutagenesis Improved the Anti-MRSA Activity of Brevibacillus sp. SPR20

Brevibacillus sp. SPR20 produced potentially antibacterial substances against methicillin-resistant Staphylococcus aureus (MRSA). The synthesis of these substances is controlled by their biosynthetic gene clusters. Several mutagenesis methods are used to overcome the restriction of gene regulations when genetic information is absent. Atmospheric and room temperature plasma (ARTP) is a powerful technique to initiate random mutagenesis for microbial strain improvement. This study utilized an argon-based ARTP to conduct the mutations on SPR20. The positive mutants of 40% occurred. The M27 mutant exhibited an increase in anti-MRSA activity when compared to the wild-type strain, with the MIC values of 250-500 and 500 μg/mL, respectively. M27 had genetic stability because it exhibited constant activity throughout fifteen generations. This mutant had similar morphology and antibiotic susceptibility to the wild type. Comparative proteomic analysis identified some specific proteins that were upregulated in M27. These proteins were involved in the metabolism of amino acids, cell structure and movement, and catalytic enzymes. These might result in the enhancement of the anti-MRSA activity of the ARTP-treated SPR20 mutant. This study supports the ARTP technology designed to increase the production of valuable antibacterial agents.

Focus and Insights into the Synthetic Biology-Mediated Chassis of Economically Important Fungi for the Production of High-Value Metabolites

Substantial progress has been achieved and knowledge gaps addressed in synthetic biology-mediated engineering of biological organisms to produce high-value metabolites. Bio-based products from fungi are extensively explored in the present era, attributed to their emerging importance in the industrial sector, healthcare, and food applications. The edible group of fungi and multiple fungal strains defines attractive biological resources for high-value metabolites comprising food additives, pigments, dyes, industrial chemicals, and antibiotics, including other compounds. In this direction, synthetic biology-mediated genetic chassis of fungal strains to enhance/add value to novel chemical entities of biological origin is opening new avenues in fungal biotechnology. While substantial success has been achieved in the genetic manipulation of economically viable fungi (including Saccharomyces cerevisiae) in the production of metabolites of socio-economic relevance, knowledge gaps/obstacles in fungal biology and engineering need to be remedied for complete exploitation of valuable fungal strains. Herein, the thematic article discusses the novel attributes of bio-based products from fungi and the creation of high-value engineered fungal strains to promote yield, bio-functionality, and value-addition of the metabolites of socio-economic value. Efforts have been made to discuss the existing limitations in fungal chassis and how the advances in synthetic biology provide a plausible solution.

Screening of Wild Lactic Acid Bacteria from Algerian Traditional Cheeses and Goat Butter to Develop a New Probiotic Starter Culture

Twenty-five lactic acid bacterial (LAB) strains have been isolated from traditional goat butter and three types of cheese (dry Klila, frech Klila, and Bouhezza) and evaluated for technological abilities, probiotic properties, and potentials as starter cultures. The twenty-five LAB strains comprised eight strains belonging to Lactobacillus, four strains belonging to Lactococcus, eleven strains belonging to Enterococcus, and two strains belonging to Leuconostoc. A non-hierarchical cluster analysis was performed in order to select the performing strains. After carrying out the preliminary phenotypic characterizations and the probiotic potential, three strains designated as BM10, B15, and C30 belonging to the genus Lactobacillus and Enterococcus with good tolerance to acidity were selected. The strains showed a significant resistance to 0.5% bile salts and 0.4% phenol. Hemolytic activity was not detected; in addition, good hydrophobicity and autoaggregation was obtained. A significant antimicrobial activity was exhibited by all selected strains against Listeria innocua. Genotypic identification by 16S rRNA allowed the identification of B15, BM10, and C30 as Lactobacillus plantarum, Lactobacillus casei, and Enterococcus durans, respectively. The results of the current study suggest that the strains isolated from Algerian fermented dairy products have high potential as probiotic starter cultures in the goat butter and cheese industry.

Production, optimization, and purification of alkaline thermotolerant protease from newly isolated Phalaris minor seeds

The present work aims to purify and perform a preliminary analysis on a thermostable serine alkaline protease from a recently identified P. minor. The enzyme was purified 2.7-fold with a 12.4 % recovery using Sephadex G-100 chromatography, DEAE-cellulose, and ammonium sulphate precipitation. The isolated enzyme has a specific activity of 473 U/mg. The purified protease had a molecular mass of 29 kDa, and just one band was seen, which matched the band obtained using SDS-PAGE. High thermostability was demonstrated by the enzymes, which had half-lives of 31.79 and 6.0 min (a 5.3-fold improvement), enthalpies of denaturation (ΔH°) of 119.53 and 119.35 KJ mol^-1, entropies of denaturation (ΔS°) of 32.96 and 41.11 J/mol·K, and free energies of denaturation (ΔG°) of 108.87 and 105.58 KJ mol^-1 for the protease enzyme. Studies on the folding and stability of alkaline proteases are important since their use in biotechnology requires that they operate in settings of extreme pH and temperature. According to the kinetic and thermodynamic properties, the protease produced by P. minor is superior to that produced by other sources and previously described plants, and it might find utility in a variety of industrial fields.

Bacteria as biofactory of pigments: Evolution beyond therapeutics and biotechnological advancements

Bacterial pigments are the wonder molecules of nature that have attracted the attention of industries in recent years. To date, various synthetic pigments have been in use in food, cosmetics, and textile industries that have not only shown a notoriously toxic nature but also posed threat to the ecosystem. Moreover, nutraceuticals, fisheries, and animal husbandry were highly dependent on plant sources for products that aid in disease prevention and improve stock health. In this context, the use of bacterial pigments as new-generation colorants, food fortifiers, and supplements can hold great prospects as low-cost, healthy, and eco-friendly alternatives. The majority of studies on these compounds were restricted to antimicrobial, antioxidant, and anticancer potentials to date. Each of these can be highly beneficial for the development of new-generation drugs, but their other potential niche in various industries that pose health and environmental risks needs to be explored. Recent advances in novel strategies of metabolic engineering, advancements in optimization tools for the fermentation process, and the design of appropriate delivery systems will greatly expand the market of bacterial pigments in industries. This review summarizes the current technologies for enhancing production, recovery, stability, and appreciable use of bacterial pigments in industries apart from therapeutics with proper financial aspects. The toxicity perspectives have been focused to emphasize that these wonder molecules are the need of the hour and their future prospects have been highlighted. Extensive literature has been studied to include the challenges of bacterial pigments from environmental and health risk perspectives.

Gamma irradiation mediated production improvement of some myco-fabricated nanoparticles and exploring their wound healing, anti-inflammatory and acetylcholinesterase inhibitory potentials

In the current scenario, scaling up the microbial production of nanoparticles with diverse biological applications is an emerging prospect for NPs' sustainable industry. Thus, this paper was conducted to develop a suitable applicative process for the myco-fabrication of cobalt-ferrite (CoFeNPs), selenium (SeNPs), and zinc oxide (ZnONPs) nanoparticles. A strain improvement program using gamma irradiation mutagenesis was applied to improve the NPs-producing ability of the fungal strains. The achieved yields of CoFeNPs, SeNPs, and ZnONPs were intensified by a 14.47, 7.85, and 22.25-fold increase from the initial yield following gamma irradiation and isolation of stable mutant strains. The myco-fabricated CoFeNPs, SeNPs, and ZnONPs were then exploited to study their wound healing, and anti-inflammatory. In addition, the acetylcholinesterase inhibition activities of the myco-fabricated NPs were evaluated and analyzed by molecular docking. The obtained results confirmed the promising wound healing, anti-inflammatory, and acetylcholinesterase inhibition potentials of the three types of NPs. Additionally, data from analyzing the interaction of NPs with acetylcholinesterase enzyme by molecular docking were in conformation with the experimental data.

Discovery of a gene cluster for the biosynthesis of novel cyclic peptide compound, KK-1, in Curvularia clavata

KK-1, a cyclic depsipeptide with 10 residues produced by a filamentous fungus Curvularia clavata BAUA-2787, is a promising pesticide active compound with high activity against many plant pathogens, especially Botrytis cinerea. As a first step toward the future mass production of KK-1 through synthetic biological approaches, we aimed to identify the genes responsible for the KK-1 biosynthesis. To achieve this, we conducted whole genome sequencing and transcriptome analysis of C. clavata BAUA-2787 to predict the KK-1 biosynthetic gene cluster. We then generated the overexpression and deletion mutants for each cluster gene using our originally developed transformation system for this fungus, and analyzed the KK-1 production and the cluster gene expression levels to confirm their involvement in KK-1 biosynthesis. As a result of these, a region of approximately 71 kb was found, containing 10 open reading frames, which were co-induced during KK-1 production, as a biosynthetic gene cluster. These include kk1B, which encodes nonribosomal peptide synthetase with a domain structure that is consistent with the structural features of KK-1, and kk1F, which encodes a transcription factor. The overexpression of kk1F increased the expression of the entire cluster genes and, consequently, improved KK-1 production, whereas its deletion decreased the expression of the entire cluster genes and almost eliminated KK-1 production, demonstrating that the protein encoded by kk1F regulates the expressions of the other nine cluster genes cooperatively as the pathway-specific transcription factor. Furthermore, the deletion of each cluster gene caused a reduction in KK-1 productivity, indicating that each gene is involved in KK-1 production. The genes kk1A, kk1D, kk1H, and kk1I, which showed a significant decrease in KK-1 productivity due to deletion, were presumed to be directly involved in KK-1 structure formation, including the biosynthesis of the constituent residues. kk1C, kk1E, kk1G, and kk1J, which maintained a certain level of KK-1 productivity despite deletion, were possibly involved in promoting or assisting KK-1 production, such as extracellular transportation and the removal of aberrant units incorporated into the peptide chain.

Genetic enhancement of Trichoderma asperellum biocontrol potentials and carbendazim tolerance for chickpea dry root rot disease management

Advances in biocontrol potentials and fungicide resistance are highly desirable for Trichoderma. Thus, it is profitable to use mutagenic agents to develop superior strains with enhanced biocontrol properties and fungicide tolerance in Trichoderma. This study investigates the N-methyl-n-nitro-N-nitrosoguanidine (NTG) (100 mg/L) induced mutants of Trichoderma asperellum. Six NTG (3 each from 1st & 2nd round) induced mutants were developed and evaluated their biocontrol activities and carbendazim tolerance. Among the mutant N2-3, N2-1, N1 and N2-2 gave the best antagonistic and volatile metabolite activities on inhibition of chickpea F. oxysporum f. sp. ciceri, B. cinerea and R. bataticola mycelium under in vitro condition. Mutant N2-2 (5626.40 μg/ml) showed the highest EC50 value against carbendazim followed by N2-3 (206.36 μg/ml) and N2-1 (16.41 μg/ml); and succeeded to sporulate even at 2000 μg/ml of carbendazim. The biocontrol activity of N2-2 and N2 with half-dose of carbendazim was evaluated on chickpea dry root rot under controlled environment. Disease reduction and progress of the dry root rot was extremely low in T7 (N2-2 + with half-dose of carbendazim) treatment. Further, carbendazim resistant mutants demonstrated mutation in tub2 gene of β-tubulin family which was suggested through the 37 and 183 residue changes in the superimposed protein structures encoded by tub2 gene in N2 and N2-2 with WT respectively. This study conclusively implies that the enhanced carbendazim tolerance in N2-2 mutant did not affect the mycoparasitism and plant growth activity of Trichoderma. These mutants were as good as the wild-type with respect to all inherent attributes.

New alternative sources of omega-3 fish oil

Long-chain omega-3 polyunsaturated fatty acids such as eicosapentaenoic and docosahexaenoic acids play an important role in brain growth and development, as well as in the health of the body. These fatty acids are traditionally found in seafood, such as fish, fish oils, and algae. They can also be added to food or consumed through dietary supplements. Due to a lack of supply to meet current demand and the potential for adverse effects from excessive consumption of fish and seafood, new alternatives are being sought to achieve the recommended levels in a safe and sustainable manner. New sources have been studied and new production mechanisms have been developed. These new proposals, as well as the importance of these fatty acids, are discussed in this paper.

Insecticidal characteristics and structural identification of the potential active compounds from Streptomyces sp. KR0006: Strain improvement through mutagenesis

Pest control by biological means is an effective, eco-friendly, and promising method that typically involves compounds naturally derived from actinomycetes. Thus, the present study aimed to screen, characterize, and identify the structure of insecticidal compounds from Streptomyces sp. KR0006 and increase the activity through mutagenesis. In the examination of the insecticidal activity level of the isolates, Streptomyces sp. KR0006 metabolite showed significant activity against larvae and moths of Plutella xylostella. Taxonomic analyses of the 16S rRNA gene sequences revealed that the isolated KR0006 strain tended to be 99% consistent with Streptomyces cinereoruber strain NBRC 12756. Three active compounds isolated from the culture filtrate of KR0006 were purified by solvent partition, mid-pressure liquid chromatography (MPLC), Sephadex LH20 column chromatography, and high-performance liquid chromatography (HPLC). By performing ¹H-NMR, ¹³C-NMR, and 2D-NMR experiments, and high-resolution electrospray ionization mass spectrometry analysis, the 316-HP2, 316-HP3, and 316-HP5 compounds were inferred as antimycin A3a (MW, 519.; C₂₆H₃₆N₂O₉), antimycin A8a (MW, 534; C₂₇H₃₈N₂O₉), and antimycin A1a (MW, 548; C₂₈H₄₀N₂O₉) respectively. Mutant U67 obtained from exposure to ultraviolet (UV) irradiation (254 nm, height 17 cm) for 70 seconds resulted in a 70% more larval mortality than that of the initial wild culture. The second mutation of the culture broth enhanced insecticidal activity by 80 and 100% compared with the first mutation and initial medium, respectively. Our study found that Streptomyces sp. KR0006 strain produces insecticidal active compounds and could be used for practical pest management.

Bioprospecting endophytic fungi for antifeedants and larvicides and their enhancement by gamma irradiation

The search and discovery of new natural products with antifeedant and larvicidal potentials to mitigate harmful insects are scientific pressing issues in the modern agriculture. In this paper, the antifeedant and larvicidal potentials of 69 fungal isolates were screened against the Egyptian cotton leafworm Spodoptera littoralis. A total of 17 isolates showed the insecticidal potentials with three promising isolates. These strains were Aspergillus sydowii, Lasiodiplodia theobromae, and Aspergillus flavus isolated from Ricinus communis (bark), Terminalia arjuna (Bark), and Psidium guajava (twigs), respectively. The effect of gamma irradiation on the antifeedant and larvicidal activities of the three strains was investigated. Exposure of the fungal spores to 1000 Gy of gamma rays significantly intensified both the antifeedant and larvicidal potentials. To identify compounds responsible for these activities, extracts of the three strains were fractionated by thin layer chromatography. The nature of the separated compounds namely, Penitrem A, 1, 3, 5, 8- tetramethyl- 4, 6-diethyl- 7- [2- (methoxycarbonyl)ethyl] porphyrin (from A. sydowii), Penitrem A, 2, 7, 12, 17-Tetramethyl-3, 5:8, 10:13, 15:18, 20-tetrakis (2,2-dimethylpropano) porphyrin (from A. flavus), N,N-Diethyl-3-nitrobenzamide, and Diisooctyl-phthalate (from L. theobromae) were studied by GC-MS analysis. These findings recommend endophytic fungi as promising sources of novel natural compounds to mitigate harmful insects.

Three promising fungal endophytes with antifeedant and larvicidal activities were reported.

The antifeedant and larvicidal activities were intensified following exposure of fungal spores to 1000 Gy gamma rays.

Extracts of the three strains were separately fractionated by TLC then GC-MS was used to identify chemical constituents responsible for bioactivity.

Engineering the methyltransferase through inactivation of the genK and genL leads to a significant increase of gentamicin C1a production in an industrial strain of Micromonospora echinospora 49-92S

In this study, a single-component high-yielding Micromonospora echinospora strain 49-92S-KL01 was constructed by deleting methyltransferase-encoding genes genK and genL. In 5-L fermentation trials, gentamicin C1a titers in the mutant strain were 3.22-fold higher than that in the parental strain (211 U/mL vs. 50 U/mL). The glycolysis pathway and tricarboxylic acid cycle fluxes were reduced by 26.8% and 26.6%, respectively, compared to the parental strain according to the metabolic flux analysis during the stationary phase, resulting in lower levels of energy supplements required for the cellular maintenance. Meanwhile, a significant enhancement in precursor (paromamine) accumulation and availability was observed in 49-92S-KL01 compared to parental strain. These results indicate that genK and genL significantly affect the synthesis of gentamicin C1a. In addition, this study provides a more rational strategy for gentamicin C1a production.

Combined evolutionary and metabolic engineering improve 2-keto-L-gulonic acid production in Gluconobacter oxydans WSH-004

The direct fermentation of the precursor of vitamin C, 2-keto-L-gulonic acid (2-KLG), has been a long-pursued goal. Previously, a strain of Gluconobacter oxydans WSH-004 was isolated that produced 2.5 g/L 2-KLG, and through adaptive evolution engineering, the strain G. oxydans MMC3 could tolerate 300 g/L D-sorbitol. This study verified that the sndh-sdh gene cluster encoded two key dehydrogenases for the 2-KLG biosynthesis pathway in this strain. Then G. oxydans MMC3 further evolved through adaptive evolution to G. oxydans 2-KLG5, which can tolerate high concentrations of D-sorbitol and 2-KLG. Finally, by increasing the gene expression levels of the sndh-sdh and terminal oxidase cyoBACD in G. oxydans 2-KLG5, the 2-KLG accumulation in the 5-L fermenter increased to 45.14 g/L by batch fermentation. The results showed that combined evolutionary and metabolic engineering efficiently improved the direct production of 2-KLG from D-sorbitol in G. oxydans.

Implementation of Perforated Concentric Ring Walls Considerably Improves Gas-Liquid Mass Transfer of Shaken Bioreactors

Since their first use in the 1930s, shake flasks have been a widely used bioreactor type for screening and process development due to a number of advantages. However, the limited gas-liquid mass transfer capacities—resulting from practical operation limits regarding shaking frequency and filling volumes—are a major drawback. The common way to increase the gas-liquid mass transfer in shake flasks with the implementation of baffles is generally not recommended as it comes along with several severe disadvantages. Thus, a new design principle for shaken bioreactors that aims for improving the gas-liquid mass transfer without losing the positive characteristics of unbaffled shake flasks is introduced. The flasks consist of cylindrical glass vessels with implemented perforated concentric ring walls. The ring walls improve the gas-liquid mass transfer via the formation of additional liquid films on both of its sides, whereas the perforations allow for mixing between the compartments. Sulfite oxidation experiments revealed over 200% higher maximum oxygen transfer capacities (OTR_max) compared to conventional shake flasks. In batch cultivations of Escherichia coli BL21 in mineral media, unlimited growth until glucose depletion and oxygen transfer rates (OTR) of up to 138 mmol/L/h instead of an oxygen limitation at 57 mmol/L/h as in normal shake flasks under comparable conditions could be achieved. Even overflow metabolism could be prevented due to sufficient oxygen supply without the use of unconventional shaking conditions or oxygen enrichment. Therefore, we believe that the new perforated ring flask principle has a high potential to considerably improve biotechnological screening and process development steps.

Bioprospecting endophytic fungi for bioactive metabolites and use of irradiation to improve their bioactivities

The search for new bioactive compounds with innovative modes of action and chemistry are desperately needed to tackle the increased emergence of drug-resistant microbes. With this view, this paper was conducted for the isolation, identification, and biological evaluation of fungal endophytes of eleven different plant species. A total of 69 endophytic strains were isolated and tested for the presence of bioactive metabolites with antifungal, antibacterial, anticancer, and antioxidant properties in their extracts. Upon screening, two promising strains were found to have all the before-mentioned activities. These strains were Aspergillus sydowii isolated from the bark of Ricinus communis and Aspergillus flavus isolated from the twigs of Psidium guajava. Major compounds present in extracts of the two strains were identified by GC-Mass analyses. Several well-known bioactive compounds as well as unreported ones were identified in the fungal extracts of the two strains. Furthermore, gamma irradiation (at 1000 Gy) of the fungal cultures resulted in improved bioactivities of extracts from the two strains. These findings recommend the two fungal strains as sources of antimicrobial, anticancer, and antioxidant compounds which may aid in the development of novel drugs. The presented research also explains the high-value of fungal endophytes as untapped sources of bioactive metabolites.

Bioprospecting endophytic fungi for bioactive metabolites and use of irradiation to improve their bioactivities

The search for new bioactive compounds with innovative modes of action and chemistry are desperately needed to tackle the increased emergence of drug-resistant microbes. With this view, this paper was conducted for the isolation, identification, and biological evaluation of fungal endophytes of eleven different plant species. A total of 69 endophytic strains were isolated and tested for the presence of bioactive metabolites with antifungal, antibacterial, anticancer, and antioxidant properties in their extracts. Upon screening, two promising strains were found to have all the before-mentioned activities. These strains were Aspergillus sydowii isolated from the bark of Ricinus communis and Aspergillus flavus isolated from the twigs of Psidium guajava. Major compounds present in extracts of the two strains were identified by GC-Mass analyses. Several well-known bioactive compounds as well as unreported ones were identified in the fungal extracts of the two strains. Furthermore, gamma irradiation (at 1000 Gy) of the fungal cultures resulted in improved bioactivities of extracts from the two strains. These findings recommend the two fungal strains as sources of antimicrobial, anticancer, and antioxidant compounds which may aid in the development of novel drugs. The presented research also explains the high-value of fungal endophytes as untapped sources of bioactive metabolites.

Exploiting the exceptional biosynthetic potency of the endophytic Aspergillus terreus in enhancing production of Co3O4, CuO, Fe3O4, NiO, and ZnO nanoparticles using bioprocess optimization and gamma irradiation

Developing a suitable applicative process and scaling up the microbial synthesis of nanomaterials is an attractive and emerging prospect for a future sustainable industrial production. In this paper, optimization of fermentation conditions for enhanced production of Co₃O₄, CuO, Fe₃O₄, NiO, and ZnO nanoparticles by the endophytic A. terreus ORG-1 was studied. Different cultivation conditions were evaluated. Then, a response surface methodology program was used to optimize physical conditions controlling the biosynthesis of these NPs. Finally, the use of gamma irradiation for improvement of NPs’ production was adopted. Under the optimum conditions and after gamma irradiation, the final yields of the respective NPs reached 545.71, 651.67, 463.19, 954.88, 1356.42 mg L⁻¹. To the best of our knowledge, this is the first report on the production and enhancement of different types of nanomaterials from one microbial culture that can open up the way towards the industrialization of the microbial production of nanomaterials.

Gamma-induced mutants of Bacillus and Streptomyces display enhanced antagonistic activities and suppression of the root rot and wilt diseases in pulses

This study aims to increase Bacillus and Streptomyces antagonistic activity against the root rot and wilt diseases of pulses caused by Macrophomina phaseolina and Fusarium oxysporum f. sp. udum, respectively. To increase antagonistic action, Bacillus subtilis BRBac4, Bacillus siamensis BRBac21, and Streptomyces cavourensis BRAcB10 were subjected to random mutagenesis using varying doses of gamma irradiation (0.5–3.0 kGy). Following the irradiation, 250 bacterial colonies were chosen at random for each antagonistic strain and their effects against pathogens were evaluated in a plate assay. The ERIC, BOX, and random amplified polymorphic studies demonstrated a clear distinction between mutant and wild-type strains. When mutants were compared to wild-type strains, they showed improved plant growth-promoting characteristics and hydrolytic enzyme activity. The disease suppression potential of the selected mutants, B. subtilis BRBac4-M6, B. siamensisi BRBac21-M10, and S. cavourensis BRAcB10-M2, was tested in green gram, black gram, and red gram. The combined inoculation of B. siamensis BRBac21-M10 and S. cavourensis BRAcB10-M2 reduced the incidence of root rot and wilt disease. The same treatment also increased the activity of the defensive enzymes peroxidase, polyphenol oxidase, and phenylalanine ammonia-lyase. These findings suggested that gamma-induced mutation can be exploited effectively to improve the biocontrol characteristics of Bacillus and Streptomyces. Following the field testing, a combined bio-formulation of these two bacteria may be utilised to address wilt and root-rot pathogens in pulses.

Characterization of isolated UV-C-irradiated mutants of microalga Chlorella vulgaris for future biofuel application

Microalgae-based biofuel is considered as one of the most promising sources of alternative energy because it is sustainable and does not pose threats to the environment and food security. However, attempts in improving microalgal strains to attain the ideal characteristics for biofuel application are yet to unravel. In this study, random UV-C mutagenesis was employed to generate starch-deficient mutants of indigenous Chlorella vulgaris to enhance its productivity. Out of 872 colonies, two isolated mutants (cvm5 and cvm6) were isolated and showed significant increase in cell concentrations by > 1.47-fold and > 1.04-fold, respectively. However, mutant cells exhibited smaller in size which might contributed to the significant decrease in their biomass. Moreover, gathered data revealed that the total lipid content of cvm5 was enhanced significantly (75%, > 1.3-fold increase). Additionally, triacylglycerol (TAG) content of the said mutant constitutes 48% of the dry cell weight (DCW) while cvm6 consist of 41% of the DCW. These promising and novel findings suggest that the two generated and isolated mutants are good candidates for future commercial biofuel production, especially in the Philippines. In addition, these findings may contribute on the prior knowledge of the usage of UV-C for microalgal strain development.

Bridging the gap between microbial limits and extremes in space: space microbial biotechnology in the next 15 years

The establishment of a permanent human settlement in space is one of humanity's ambitions. To achieve this, microorganisms will be used to carry out many functions such as recycling, food and pharmaceutical production, mining and other processes. However, the physical and chemical extremes in all locations beyond Earth exceed known growth limits of microbial life. Making microbes more tolerant of a greater range of extraterrestrial extremes will not produce organisms that can grow in unmodified extraterrestrial environments since in many of them not even liquid water can exist. However, by narrowing the gap, the engineering demands on bioindustrial processes can be reduced and greater robustness can be incorporated into the biological component. I identify and describe these required microbial biotechnological modifications and speculate on long-term possibilities such as microbial biotechnology on Saturn's moon Titan to support a human presence in the outer Solar System and bioprocessing of asteroids. A challenge for space microbial biotechnology in the coming decades is to narrow the microbial gap by systemically identifying the genes required to do this and incorporating them into microbial systems that can be used to carry out bioindustrial processes of interest.

Production of polyunsaturated fatty acids by Schizochytrium (Aurantiochytrium) spp

Diverse health benefits are associated with dietary consumption of omega-3 long-chain polyunsaturated fatty acids (ω-3 LC-PUFA), particularly docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA). Traditionally, these fatty acids have been obtained from fish oil, but limited supply, variably quality, and an inability to sustainably increase production for a rapidly growing market, are driving the quest for alternative sources. DHA derived from certain marine protists (heterotrophic thraustochytrids) already has an established history of commercial production for high-value dietary use, but is too expensive for use in aquaculture feeds, a much larger potential market for ω-3 LC-PUFA. Sustainable expansion of aquaculture is prevented by its current dependence on wild-caught fish oil as the source of ω-3 LC-PUFA nutrients required in the diet of aquacultured animals. Although several thraustochytrids have been shown to produce DHA and EPA, there is a particular interest in Schizochytrium spp. (now Aurantiochytrium spp.), as some of the better producers. The need for larger scale production has resulted in development of many strategies for improving productivity and production economics of ω-3 PUFA in Schizochytrium spp. Developments in fermentation technology and metabolic engineering for enhancing LC-PUFA production in Schizochytrium spp. are reviewed.

New insights in pectinase production development and industrial applications

Pectinase, a group of pectin degrading enzymes, is one of the most influential industrial enzymes, helpful in producing a wide variety of products with good qualities. These enzymes are biocatalysts and are highly specific, non-toxic, sustainable, and eco-friendly. Consequently, both pectin and pectinase are crucially essential biomolecules with extensive applicatory perception in the biotechnological sector. The market demand and application of pectinases in new sectors are continuously increasing. However, due to the high cost of the substrate used for the growth of microbes, the production of pectinase using microorganisms is limited. Therefore, low-cost or no-cost substrates, such as various agricultural biomasses, are emphasized in producing pectinases. The importance and implications of pectinases are rising in diverse areas, including bioethanol production, extraction of DNA, and protoplast isolation from a plant. Therefore, this review briefly describes the structure of pectin, types and source of pectinases, substrates and strategies used for pectinases production, and emphasizes diverse potential applications of pectinases. The review also has included a list of pectinases producing microbes and alternative substrates for commercial production of pectinase applicable in pectinase-based industrial technology.Key points• Pectinase applications are continuously expanding.• Organic wastes can be used as low-cost sources of pectin.• Utilization of wastes helps to reduce pollution.

New and potent production platform of the acetylcholinesterase inhibitor huperzine A by gamma-irradiated Alternaria brassicae under solid-state fermentation

Huperzine-A (HupA) is an emerging, powerful, and promising natural acetylcholinesterase inhibitor. Despite that, the achieved yields of HupA from microbial sources are still far from the industrial applications. Accordingly, this paper was conducted to valorize solid-state fermentation (SSF) as an efficient production platform of HupA. Four agro-industrial wastes, namely rice bran, potato peel, sugarcane bagasse, and wheat bran, were tested and screened as cultural substrates for the production of HupA by the endophytic Alternaria brassica under SSF. Maximum HupA production was attained on using rice bran moistened by Czapex's dox mineral broth. In the effort to increase the HupA titer, supplementation of the best moistening agent by different carbon and nitrogen sources was successfully investigated. Additionally, factors affecting HupA production under SSF including substrate concentration, moistening level, and inoculum concentration were optimized using response surface methodology. A Box-Behnken design was applied for generating a predictive model of the interactions between these factors. Under the optimum conditions of 15 g rice bran, inoculum concentration of 5 × 10⁶ spores mL^-1, and 60% moisture level, HupA concentration was intensified to 518.93 μg g^-1. Besides, HupA production by the fungal strain was further enhanced using gamma-irradiation mutagenesis. The final HupA production was significantly intensified following exposure to 0.5 KGy gamma radiation to 1327 μg g^-1, which represents a 12.85-fold increase. This is the first report on the successful production of the natural fungal metabolite HupA under SSF. Moreover, the achieved yield in this study using agro-industrial wastes may contribute to reducing the cost of HupA manufacture.Key points• Different agro-industrial by-products were tried as cultural substrates for the production of the acetylcholinesterase inhibitor HupA under SSF for the first time.• Factors affecting HupA production under SSF were optimized using response surface methodology.• The final HupA production was intensified following exposure to gamma radiation recording 1327 μg g^-1, which represents a 12.85-fold increase.

Definitive Screening Design and Artificial Neural Network for Modeling a Rapid Biodegradation of Date Palm Fronds by a New Trichoderma sp. PWN6 into Citric Acid

Generally, the bioconversion of lignocellulolytics into a new biomolecule is carried out through two or more steps. The current study used one-step bioprocessing of date palm fronds (DPF) into citric acid as a natural product, using a pioneer strain of Trichodermaharzianum (PWN6) that has been selected from six tested isolates based on the highest organic acid (OA) productivity (195.41 µmol/g), with the lowest amount of the released glucose. Trichoderma sp. PWN6 was morphologically and molecularly identified, and the GenBank accession number was MW78912.1. Both definitive screening design (DSD) and artificial neural network (ANN) were applied, for the first time, for modeling the bioconversion process of DPF. Although both models are capable of making accurate predictions, the ANN model outperforms the DSD model in terms of OA production, as ANN is characterized by a higher value of R² (0.963) and validation R² (0.967), and lower values of the RMSE (13.44), MDA (11.06), and SSE (9749.5). Citric acid was the only identified OA as was confirmed by GC-MS and UPLC, with a total of 1.5%. In conclusion, DPF together with T. harzianum PWN6 is considered an excellent new combination for citric acid biosynthesis, after modeling with artificial intelligence procedure.

Advances in Microbial Fermentation Processes

In the food sector, fermentation processes have been the object of great interest in regard to enhancing the yield, the quality, and the safety of the final product [...]

Discovery of the anticancer drug vinblastine from the endophytic Alternaria alternata and yield improvement by gamma irradiation mutagenesis

AIMS

Several fungal endophytes were isolated from some medicinal plants and screened for their ability to produce the anticancer drug vinblastine.

METHODS AND RESULTS

An isolate was found to produce vinblastine (205·38 μg l^-1 ), and the identity of the fungal vinblastine was confirmed by UV spectroscopic, high-performance liquid chromatography and electrospray ionization mass spectrometry analyses. Based on both morphological and molecular studies, the vinblastine-producing strain was identified as Alternaria alternata. Cytotoxic activities of the fungal vinblastine were evaluated against CHO-K1, MCF-7 and HepG-2 cell lines by the MTT assay. The proliferation of these cell lines was inhibited after treatment with fungal vinblastine and the recorded IC₅₀ values of the respective cell lines were 12·15, 8·55 and 7·48 μg ml^-1 . A strain improvement programme for improving vinblastine productivity by the fungal strain was also used. In addition, 10 broth media were evaluated for further increasing the production of vinblastine. The yield of vinblastine was intensified by 3·98-fold following gamma irradiation at 1000 Gy, and a stable mutant strain was isolated. Among the screened media, M1D broth (pH 6·0) stimulated the highest vinblastine production of 1553·62 μg l^-1 by the isolated mutant strain.

CONCLUSIONS

The present study is the first report on the production and yield improvement of the anticancer drug vinblastine by A. alternata.

SIGNIFICANCE AND IMPACT OF THE STUDY

These findings suggest A. alternata as a viable and potent source with excellent biotechnological potential for the production of vinblastine.

The effect of UV radiation on O-7 Actinomycete in producing bioactive compounds in different growth conditions

Actinomycetes have been identified as an origin of many secondary metabolites, antibiotics and active components that impact microbial growth. Mediated mutations using UV in practice for the breeding of organisms. The objective of this study is to analyses the impact of UV radiation on the (O-7) Actinomycete isolate. This was a prospective analytical study of a several of actinomycetes. The isolates were screened for antimicrobial efficacy against multiple Gram-positive, Gram-negative bacteria, yeast, and fungi. Various factors such as UV, temperature, pH, light, agitation, fermentation durations and aeration have also been boosted for optimal antimicrobial production. The isolate (O-7) Actinomycete has been recognized as a highly bioactive producing organism. The isolate was exposed to various wavelengths, times under numerous growth conditions. It was found that 4% concentration of glucose as a carbon source is significantly optimal for the production of antibiotic for (O-7) UV exposed strain, however, concentration of 1% of lactose is significantly optimal for the production of antibiotic for (O-7) UV exposed strain. Yeast extract at a concentration of 1% was found to be the best source of nitrogen for (O-7) UV exposed, while pH 7.0 was found to be the most suitable for the same isolate. From the temperature optimization study, it was observed that (O-7) exposed strain showed good growth and maximum antibiotic production at 28 °C. The soil-isolated biological compounds (O-7) were effective against certain types of bacteria and fungi, and the research also demonstrated that exposure to UV radiation enhanced the production of these compounds.

New insights into the degradation of synthetic pollutants in contaminated environments

The environment is contaminated by synthetic contaminants owing to their extensive applications globally. Hence, the removal of synthetic pollutants (SPs) from the environment has received widespread attention. Different remediation technologies have been investigated for their abilities to eliminate SPs from the ecosystem; these include photocatalysis, sonochemical techniques, nanoremediation, and bioremediation. SPs, which can be organic or inorganic, can be degraded by microbial metabolism at contaminated sites. Owing to their diverse metabolisms, microbes can adapt to a wide variety of environments. Several microbial strains have been reported for their bioremediation potential concerning synthetic chemical compounds. The selection of potential strains for large-scale removal of organic pollutants is an important research priority. Additionally, novel microbial consortia have been found to be capable of efficient degradation owing to their combined and co-metabolic activities. Microbial engineering is one of the most prominent and promising techniques for providing new opportunities to develop proficient microorganisms for various biological processes; here, we have targeted the SP-degrading mechanisms of microorganisms. This review provides an in-depth discussion of microbial engineering techniques that are used to enhance the removal of both organic and inorganic pollutants from different contaminated environments and under different conditions. The degradation of these pollutants is investigated using abiotic and biotic approaches; interestingly, biotic approaches based on microbial methods are preferable owing to their high potential for pollutant removal and cost-effectiveness.

Recent developments on solid-state fermentation for production of microbial secondary metabolites: Challenges and solutions

Microbial secondary metabolites (SMs) are the intermediate or the product of metabolism produced during fermentation process. SMs are produced during stationary phase and play a major role in competition, antagonism and self defence mechanisms. These metabolites finds application in the pharmaceuticals, food, cosmetics etc. These are produced besides primary key metabolites (e.g., amino acids, lipids, carbohydrates etc.). Growth condition in solid-state fermentation (SSF) resembles microorganism's own native environment allowing the microorganisms to adapt best. Recent developments in bioprocessing has identified specific SSF practices that have a significant impact on SMs production. The practice of SSF, representing new opportunities to design better bioprocessing with potential genetic development goals for expanding the list of exciting SMs. Current updates cover advanced techniques on SSF to improve microbial SMs production and their ease of operation and cost-effective production strategies. Various factors affecting the SSF have been discussed with respect to sustainable development of novel SSF strategies for SMs production.

Comparative Transcriptome Analysis of Streptomyces nodosus Mutant With a High-Yield Amphotericin B

Antibiotics play an important role in human health. Most antibiotics are derived from microbial secondary metabolites. Amphotericin is a polyene macrolide antibiotic synthesized by Streptomyces nodosus. S. nodosus ZJB2016050 with high-yield amphotericin B (AmB) was obtained by traditional mutagenesis using S. nodosus ATCC14899 as the original strain. The differences in the characterization of the two strains were found in color, mycelium morphology, and AmB yield. Subsequent comparative transcriptome explained the yield differences between the two strains. Pathways including the carbohydrate metabolic pathway and the secondary product synthesis pathway were targeted. The upregulation of glucokinase, phosphoglycerate mutase, and pyruvate dehydrogenase accelerates the consumption of glucose and has great effects on the accumulation of precursors. One of the competitive secondary metabolites of the polyketone synthetase (PKS) II type sapromomycin analog synthesis gene cluster was downregulated, which competes for malonyl-CoA. Five PKS modules (except for the first module amphA) of the amphotericin synthetic gene cluster in the high-yielding strain were downregulated, which resulted in the total amphotericin A (AmA) and AmB of S. nodosus ZJB2016050 being less than that of the wild-type S. nodosus ATCC14899. Combined with gene differential expression in the pentose phosphate pathway and the reaction mechanism of the ER5 domain, the reason that S. nodosus ZJB2016050 preferred to synthesize AmB was probably related to intracellular reduction.