Patterns of Hermes transposition in Drosophila melanogaster

Zinc-finger BED domains drive the formation of the active Hermes transpososome by asymmetric DNA binding

The Hermes DNA transposon is a member of the eukaryotic hAT superfamily, and its transposase forms a ring-shaped tetramer of dimers. Our investigation, combining biochemical, crystallography and cryo-electron microscopy, and in-cell assays, shows that the full-length Hermes octamer extensively interacts with its transposon left-end through multiple BED domains of three Hermes protomers contributed by three dimers explaining the role of the unusual higher-order assembly. By contrast, the right-end is bound to no BED domains at all. Thus, this work supports a model in which Hermes multimerizes to gather enough BED domains to find its left-end among the abundant genomic DNA, facilitating the subsequent interaction with the right-end.

The hAT-family transposable element, hopper, from Bactrocera dorsalis is a functional vector for insect germline transformation

Background

The hopper hAT-family transposable element isolated from the Oriental fruit fly, Bactrocera dorsalis, is distantly related to both the Drosophila hobo element and the Activator element from maize. The original 3120 bp hopper^Bd-Kah element isolated from the Kahuku wild-type strain was highly degenerate and appeared to have a mutated transposase and terminal sequences, while a second 3131 bp element, hopper^Bd-we, isolated from a white eye mutant strain had an intact transposase reading frame and terminal sequences consistent with function.

Results

The hopper^Bd-we element was tested for function by its ability to mediate germline transformation in two dipteran species other than B. dorsalis. This was achieved by creating a binary vector/helper transformation system by linking the hopper^Bd-we transposase reading frame to a D. melanogaster hsp70 promoter for a heat-inducible transposase helper plasmid, and creating vectors marked with the D. melanogaster mini-white⁺ or polyubiquitin-regulated DsRed fluorescent protein markers.

Conclusions

Both vectors were successfully used to transform D. melanogaster, and the DsRed vector was also used to transform the Caribbean fruit fly, Anastrepha suspensa, indicating a wide range of hopper function in dipteran species and, potentially, non-dipteran species. This vector provides a new tool for insect genetic modification for both functional genomic analysis and the control of insect populations.

Transposon Insertion Sequencing, a Global Measure of Gene Function

The goal of genomics and systems biology is to understand how complex systems of factors assemble into pathways and structures that combine to form living organisms. Great advances in understanding biological processes result from determining the function of individual genes, a process that has classically relied on characterizing single mutations. Advances in DNA sequencing has made available the complete set of genetic instructions for an astonishing and growing number of species. To understand the function of this ever-increasing number of genes, a high-throughput method was developed that in a single experiment can measure the function of genes across the genome of an organism. This occurred approximately 10 years ago, when high-throughput DNA sequencing was combined with advances in transposon-mediated mutagenesis in a method termed transposon insertion sequencing (TIS). In the subsequent years, TIS succeeded in addressing fundamental questions regarding the genes of bacteria, many of which have been shown to play central roles in bacterial infections that result in major human diseases. The field of TIS has matured and resulted in studies of hundreds of species that include significant innovations with a number of transposons. Here, we summarize a number of TIS experiments to provide an understanding of the method and explanation of approaches that are instructive when designing a study. Importantly, we emphasize critical aspects of a TIS experiment and highlight the extension and applicability of TIS into nonbacterial species such as yeast.

Molecular tools to create new strains for mosquito sexing and vector control

Vector control programs based on population reduction by matings with mass-released sterile insects require the release of only male mosquitoes, as the release of females, even if sterile, would increase the number of biting and potentially disease-transmitting individuals. While small-scale releases demonstrated the applicability of sterile males releases to control the yellow fever mosquito Aedes aegypti, large-scale programs for mosquitoes are currently prevented by the lack of efficient sexing systems in any of the vector species.Different approaches of sexing are pursued, including classical genetic and mechanical methods of sex separation. Another strategy is the development of transgenic sexing systems. Such systems already exist in other insect pests. Genome modification tools could be used to apply similar strategies to mosquitoes. Three major tools to modify mosquito genomes are currently used: transposable elements, site-specific recombination systems, and genome editing via TALEN or CRISPR/Cas. All three can serve the purpose of developing sexing systems and vector control strains in mosquitoes in two ways: first, via their use in basic research. A better understanding of mosquito biology, including the sex-determining pathways and the involved genes can greatly facilitate the development of sexing strains. Moreover, basic research can help to identify other regulatory elements and genes potentially useful for the construction of transgenic sexing systems. Second, these genome modification tools can be used to apply the gained knowledge to build and test mosquito sexing strains for vector control.

Functional genomics for the oleaginous yeast Yarrowia lipolytica

Oleaginous yeasts are valuable systems for biosustainable production of hydrocarbon-based chemicals. Yarrowia lipolytica is one of the best characterized of these yeast with respect to genome annotation and flux analysis of metabolic processes. Nonetheless, progress is hampered by a dearth of genome-wide tools enabling functional genomics. In order to remedy this deficiency, we developed a library of Y. lipolytica insertion mutants via transposon mutagenesis. The Hermes DNA transposon was expressed to achieve saturation mutagenesis of the genome. Over 534,000 independent insertions were identified by next-generation sequencing. Poisson analysis of insertion density classified ~ 22% of genes as essential. As expected, most essential genes have homologs in Saccharomyces cerevisiae and Schizosaccharomyces pombe, and the majority of those are also essential. As an obligate aerobe, Y. lipolytica has significantly more respiration - related genes that are classified as essential than do S. cerevisiae and S. pombe. Contributions of non-essential genes to growth in glucose and glycerol carbon sources were assessed and used to evaluate two recent genome-scale models of Y. lipolytica metabolism. Fluorescence-activated cell sorting identified mutants in which lipid accumulation is increased. Our findings provide insights into biosynthetic pathways, compartmentalization of enzymes, and distinct functions of paralogs. This functional genomic analysis of the oleaginous yeast Y. lipolytica provides an important resource for modeling, bioengineering, and design of synthetic minimalized strains of respiratory yeasts.

Sensitivity of Allelic Divergence to Genomic Position: Lessons from the Drosophila tan Gene

To identify genetic variants underlying changes in phenotypes within and between species, researchers often utilize transgenic animals to compare the function of alleles in different genetic backgrounds. In Drosophila, targeted integration mediated by the ΦC31 integrase allows activity of alternative alleles to be compared at the same genomic location. By using the same insertion site for each transgene, position effects are generally assumed to be controlled for because both alleles are surrounded by the same genomic context. Here, we test this assumption by comparing the activity of tan alleles from two Drosophila species, D. americana and D. novamexicana, at five different genomic locations in D. melanogaster. We found that the relative effects of these alleles varied among insertion sites, with no difference in activity observed between them at two sites. One of these sites simply silenced both transgenes, but the other allowed expression of both alleles that was sufficient to rescue a mutant phenotype yet failed to reveal the functional differences between the two alleles. These results suggest that more than one insertion site should be used when comparing the activity of transgenes because failing to do so could cause functional differences between alleles to go undetected.

Cell-based screens and phenomics with fission yeast

Next-generation sequencing approaches have considerably advanced our understanding of genome function and regulation. However, the knowledge of gene function and complex cellular processes remains a challenge and bottleneck in biological research. Phenomics is a rapidly emerging area, which seeks to rigorously characterize all phenotypes associated with genes or gene variants. Such high-throughput phenotyping under different conditions can be a potent approach toward gene function. The fission yeast Schizosaccharomyces pombe (S. pombe) is a proven eukaryotic model organism that is increasingly used for genomewide screens and phenomic assays. In this review, we highlight current large-scale, cell-based approaches used with S. pombe, including computational colony-growth measurements, genetic interaction screens, parallel profiling using barcodes, microscopy-based cell profiling, metabolomic methods and transposon mutagenesis. These diverse methods are starting to offer rich insights into the relationship between genotypes and phenotypes.

Post-integration silencing of piggyBac transposable elements in Aedes aegypti

The piggyBac transposon, originating in the genome of the Lepidoptera Trichoplusia ni, has a broad host range, making it useful for the development of a number of transposon-based functional genomic technologies including gene vectors, enhancer-, gene- and protein-traps. While capable of being used as a vector for the creation of transgenic insects and insect cell lines, piggyBac has very limited mobility once integrated into the genome of the yellow fever mosquito, Aedes aegypti. A transgenic Aedes aegypti cell line (AagPB8) was created containing three integrated piggyBac elements and the remobilization potential of the elements was tested. The integrated piggyBac elements in AagPB8 were transpositionally silent in the presence of functional transposase, which was shown to be capable of catalyzing the movement of plasmid-borne piggyBac elements in the same cells. The structural integrity of one of the integrated elements along with the quality of element-flanking DNA, which is known to influence transposition rates, were tested in D. melanogaster. The element was found to be structurally intact, capable of transposition and excision in the soma and germ-line of Drosophila melanogaster, and in a DNA sequence context highly conducive to element movement in Drosophila melanogaster. These data show that transpositional silencing of integrated piggyBac elements in the genome of Aedes aegypti appears to be a function of higher scale genome organization or perhaps epigenetic factors, and not due to structural defects or suboptimal integration sites.

Hsmar1 transposition is sensitive to the topology of the transposon donor and the target

Hsmar1 is a member of the Tc1-mariner superfamily of DNA transposons. These elements mobilize within the genome of their host by a cut-and-paste mechanism. We have exploited the in vitro reaction provided by Hsmar1 to investigate the effect of DNA supercoiling on transposon integration. We found that the topology of both the transposon and the target affect integration. Relaxed transposons have an integration defect that can be partially restored in the presence of elevated levels of negatively supercoiled target DNA. Negatively supercoiled DNA is a better target than nicked or positively supercoiled DNA, suggesting that underwinding of the DNA helix promotes target interactions. Like other Tc1-mariner elements, Hsmar1 integrates into 5′-TA dinucleotides. The direct vicinity of the target TA provides little sequence specificity for target interactions. However, transposition within a plasmid substrate was not random and some TA dinucleotides were targeted preferentially. The distribution of intramolecular target sites was not affected by DNA topology.

Confinement of gene drive systems to local populations: a comparative analysis

Mosquito-borne diseases such as malaria and dengue fever pose a major health problem through much of the world. One approach to disease prevention involves the use of selfish genetic elements to drive disease-refractory genes into wild mosquito populations. Recently engineered synthetic drive systems have provided encouragement for this strategy; but at the same time have been greeted with caution over the concern that transgenes may spread into countries and communities without their consent. Consequently, there is also interest in gene drive systems that, while strong enough to bring about local population replacement, are unable to establish themselves beyond a partially isolated release site, at least during the testing phase. Here, we develop simple deterministic and stochastic models to compare the confinement properties of a variety of gene drive systems. Our results highlight several systems with desirable features for confinement-a high migration rate required to become established in neighboring populations, and low-frequency persistence in neighboring populations for moderate migration rates. Single-allele underdominance and single-locus engineered underdominance have the strongest confinement properties, but are difficult to engineer and require a high introduction frequency, respectively. Toxin-antidote systems such as Semele, Merea and two-locus engineered underdominance show promising confinement properties and require lower introduction frequencies. Killer-rescue is self-limiting in time, but is able to disperse to significant levels in neighboring populations. We discuss the significance of these results in the context of a phased release of transgenic mosquitoes, and the need for characterization of local ecology prior to a release.

Mobility properties of the Hermes transposable element in transgenic lines of Aedes aegypti

The Hermes transposable element has been used to genetically transform a wide range of insect species, including the mosquito, Aedes aegypti, a vector of several important human pathogens. Hermes integrations into the mosquito germline are characterized by the non-canonical integration of the transposon and flanking plasmid and, once integrated, Hermes is stable in the presence of its transposase. In an effort to improve the post-integration mobility of Hermes in the germline of Ae. aegypti, a transgenic helper Mos1 construct expressing Hermes transposase under the control of a testis-specific promoter was crossed to a separate transgenic strain containing a target Hermes transposon. In less than 1% of the approximately 1,500 progeny from jumpstarter lines analyzed, evidence of putative Hermes germline remobilizations were detected. These recovered transposition events occur through an aberrant mechanism and provide insight into the non-canonical cut-and-paste transposition of Hermes in the germ line of Ae. aegypti.

Unique functions of repetitive transcriptomes

Repetitive sequences occupy a huge fraction of essentially every eukaryotic genome. Repetitive sequences cover more than 50% of mammalian genomic DNAs, whereas gene exons and protein-coding sequences occupy only ~3% and 1%, respectively. Numerous genomic repeats include genes themselves. They generally encode "selfish" proteins necessary for the proliferation of transposable elements (TEs) in the host genome. The major part of evolutionary "older" TEs accumulated mutations over time and fails to encode functional proteins. However, repeats have important functions also on the RNA level. Repetitive transcripts may serve as multifunctional RNAs by participating in the antisense regulation of gene activity and by competing with the host-encoded transcripts for cellular factors. In addition, genomic repeats include regulatory sequences like promoters, enhancers, splice sites, polyadenylation signals, and insulators, which actively reshape cellular transcriptomes. TE expression is tightly controlled by the host cells, and some mechanisms of this regulation were recently decoded. Finally, capacity of TEs to proliferate in the host genome led to the development of multiple biotechnological applications.

Transpositionally active episomal hAT elements

Background

hAT elements and V(D)J recombination may have evolved from a common ancestral transposable element system. Extrachromosomal, circular forms of transposable elements (referred to here as episomal forms) have been reported yet their biological significance remains unknown. V(D)J signal joints, which resemble episomal transposable elements, have been considered non-recombinogenic products of V(D)J recombination and a safe way to dispose of excised chromosomal sequences. V(D)J signal joints can, however, participate in recombination reactions and the purpose of this study was to determine if hobo and Hermes episomal elements are also recombinogenic.

Results

Up to 50% of hobo/Hermes episomes contained two intact, inverted-terminal repeats and 86% of these contained from 1-1000 bp of intercalary DNA. Episomal hobo/Hermes elements were recovered from Musca domestica (a natural host of Hermes), Drosophila melanogaster (a natural host of hobo) and transgenic Drosophila melanogaster and Aedes aegypti (with autonomous Hermes elements). Episomal Hermes elements were recovered from unfertilized eggs of M. domestica and D. melanogaster demonstrating their potential for extrachromosomal, maternal transmission. Reintegration of episomal Hermes elements was observed in vitro and in vivo and the presence of Hermes episomes resulted in lower rates of canonical Hermes transposition in vivo.

Conclusion

Episomal hobo/Hermes elements are common products of element excision and can be maternally transmitted. Episomal forms of Hermes are capable of integration and also of influencing the transposition of canonical elements suggesting biological roles for these extrachromosomal elements in element transmission and regulation.

Molecular architecture of the Mos1 paired-end complex: the structural basis of DNA transposition in a eukaryote

A key step in cut-and-paste DNA transposition is the pairing of transposon ends before the element is excised and inserted at a new site in its host genome. Crystallographic analyses of the paired-end complex (PEC) formed from precleaved transposon ends and the transposase of the eukaryotic element Mos1 reveals two parallel ends bound to a dimeric enzyme. The complex has a trans arrangement, with each transposon end recognized by the DNA binding region of one transposase monomer and by the active site of the other monomer. Two additional DNA duplexes in the crystal indicate likely binding sites for flanking DNA. Biochemical data provide support for a model of the target capture complex and identify Arg186 to be critical for target binding. Mixing experiments indicate that a transposase dimer initiates first-strand cleavage and suggest a pathway for PEC formation.

Site-directed integration of transgenes: transposons revisited using DNA-binding-domain technologies

In the last 20 years, tools derived from DNA transposons have made major contributions to genetic studies from gene delivery to gene discovery. Various complementary and fairly ubiquitous DNA vehicles have been developed. Although many transposons are efficient DNA vehicles, they appear to have limited ability to target specific sequences, since all that is required at the integration locus is the presence of a short 2- to 4-bp sequence. Consequently, insertions mediated by transposon-based vectors occur somewhat randomly. In the past 5 years, strategies have emerged to enhance the site-specificity of transposon-based vectors, and to avoid random integrations. The first proposes that new target site specificity could be grafted onto a transposase by adding a new DNA-binding domain. Alternative strategies consist of indirectly targeting either the transposase or the transposon to a chosen genomic locus. The most important information available about each strategy are presented, and limitations and future prospects are discussed.

Target site selection by the mariner-like element, Mos1

The eukaryotic transposon Mos1 is a class-II transposable element that moves using a "cut-and-paste" mechanism in which the transposase is the only protein factor required. The formation of the excision complex is well documented, but the integration step has so far received less investigation. Like all mariner-like elements, Mos1 was thought to integrate into a TA dinucleotide without displaying any other target selection preferences. We set out to synthesize what is currently known about Mos1 insertion sites, and to define the characteristics of Mos1 insertion sequences in vitro and in vivo. Statistical analysis can be used to identify the TA dinucleotides that are non-randomly targeted for transposon integration. In vitro, no specific feature determining target choice other than the requirement for a TA dinucleotide has been identified. In vivo, data were obtained from two previously reported integration hotspots: the bacterial cat gene and the Caenorhabditis elegans rDNA locus. Analysis of these insertion sites revealed a preference for TA dinucleotides that are included in TATA or TA x TA motifs, or located within AT-rich regions. Analysis of the physical properties of sequences obtained in vitro and in vivo do not help to explain Mos1 integration preferences, suggesting that other characteristics must be involved in Mos1 target choice.

Hermes transposon distribution and structure in Musca domestica

Hermes are hAT transposons from Musca domestica that are very closely related to the hobo transposons from Drosophila melanogaster and are useful as gene vectors in a wide variety of organisms including insects, planaria, and yeast. hobo elements show distinct length variations in a rapidly evolving region of the transposase-coding region as a result of expansions and contractions of a simple repeat sequence encoding 3 amino acids threonine, proline, and glutamic acid (TPE). These variations in length may influence the function of the protein and the movement of hobo transposons in natural populations. Here, we determine the distribution of Hermes in populations of M. domestica as well as whether Hermes transposase has undergone similar sequence expansions and contractions during its evolution in this species. Hermes transposons were found in all M. domestica individuals sampled from 14 populations collected from 4 continents. All individuals with Hermes transposons had evidence for the presence of intact transposase open reading frames, and little sequence variation was observed among Hermes elements. A systematic analysis of the TPE-homologous region of the Hermes transposase-coding region revealed no evidence for length variation. The simple sequence repeat found in hobo elements is a feature of this transposon that evolved since the divergence of hobo and Hermes.

Testing the palindromic target site model for DNA transposon insertion using the Drosophila melanogaster P-element

Understanding the molecular mechanisms that influence transposable element target site preferences is a fundamental challenge in functional and evolutionary genomics. Large-scale transposon insertion projects provide excellent material to study target site preferences in the absence of confounding effects of post-insertion evolutionary change. Growing evidence from a wide variety of prokaryotes and eukaryotes indicates that DNA transposons recognize staggered-cut palindromic target site motifs (TSMs). Here, we use over 10 000 accurately mapped P-element insertions in the Drosophila melanogaster genome to test predictions of the staggered-cut palindromic target site model for DNA transposon insertion. We provide evidence that the P-element targets a 14-bp palindromic motif that can be identified at the primary sequence level, which predicts the local spacing, hotspots and strand orientation of P-element insertions. Intriguingly, we find that the although P-element destroys the complete 14-bp target site upon insertion, the terminal three nucleotides of the P-element inverted repeats complement and restore the original TSM, suggesting a mechanistic link between transposon target sites and their terminal inverted repeats. Finally, we discuss how the staggered-cut palindromic target site model can be used to assess the accuracy of genome mappings for annotated P-element insertions.

Perspectives on the state of insect transgenics

Genetic transformation is a critical component to the fundamental genetic analysis of insect species and holds great promise for establishing strains that improve population control and behavior for practical application. This is especially so for insects that are disease vectors, many of which are currently subject to genomic sequence analysis, and intensive population control measures that must be improved for better efficacy and cost-effectiveness. Transposon-mediated germ-line transformation has been the ultimate goal for most fundamental and practical studies, and impressive strides have been made in recent development of transgene vector and marker systems for several mosquito species. This has resulted in rapid advances in functional genomic sequence analysis and new strategies for biological control based on conditional lethality. Importantly, advances have also been made in our ability to use these systems more effectively in terms of enhanced stability and targeting to specific genomic loci. Nevertheless, not all insects are currently amenable to germ-line transformation techniques, and thus advances in transient somatic expression and paratransgenesis have also been critical, if not preferable for some applications. Of particular importance is how this technology will be used for practical application. Early ideas for population replacement of indigenous pests with innocuous transgenic siblings by transposon-vector spread, may require reevaluation in terms of our current knowledge of the behavior of transposons currently available for transformation. The effective implementation of any control program using released transgenics, will also benefit from broadening the perspective of these control measures as being more mainstream than exotic.

The hobo-related elements in the melanogaster species group

The hobo-related sequences (hRSs) were considered as degenerate and inactive elements until recently, when one mobilizable copy was described. Using this sequence as the initial seed to search for homologous sequences in 12 available Drosophila genomes, in addition to searching for these sequences by PCR and Southern blot in nine other species, we found homologous sequences in every species of the Drosophila melanogaster species subgroup. Some evidence suggests that these non-autonomous sequences were kept mobilizable for at least 0.4 million years. Also, some very short sequences with miniature inverted-repeat transposable element (MITE) characteristics were found among these hRSs. These hRSs and their 'MITE-like' counterparts could provide a good example of the steps proposed in models that describe the MITEs origin.

Topi, an IS630/Tc1/mariner-type transposable element in the African malaria mosquito, Anopheles gambiae

IS630/Tc1/mariner elements are diverse and widespread within insects. The African malaria mosquito, Anopheles gambiae, contains over 30 families of IS630/Tc1/mariner elements although few have been studied in any detail. To examine the history of Topi elements in An. gambiae populations, Topi elements (n=73) were sampled from five distinct populations of An. gambiae from eastern and western Africa and evaluated with respect to copy number, nucleotide diversity and insertion site-occupancy frequency. Topi 1 and 2 elements were abundant (10-34 per diploid genome) and highly diverse (pi=0.051). Elements from mosquitoes collected in Nigeria were Topi 2 elements and those from mosquitoes collected in Mozambique were Topi 1 elements. Of the 49 Topi transposase open reading frames sequenced none were found to be identical. Intact elements with complete transposase open reading frames were common, although based on insertion site-occupancy frequency data it appeared that genetic drift was the major force acting on these IS630/Tc1/mariner-type elements. Topi 3 elements were not recovered from any of the populations sampled in this study and appear to be rare elements in An. gambiae, possibly due to a recent introduction.

DNA transposons and the evolution of eukaryotic genomes

Transposable elements are mobile genetic units that exhibit broad diversity in their structure and transposition mechanisms. Transposable elements occupy a large fraction of many eukaryotic genomes and their movement and accumulation represent a major force shaping the genes and genomes of almost all organisms. This review focuses on DNA-mediated or class 2 transposons and emphasizes how this class of elements is distinguished from other types of mobile elements in terms of their structure, amplification dynamics, and genomic effect. We provide an up-to-date outlook on the diversity and taxonomic distribution of all major types of DNA transposons in eukaryotes, including Helitrons and Mavericks. We discuss some of the evolutionary forces that influence their maintenance and diversification in various genomic environments. Finally, we highlight how the distinctive biological features of DNA transposons have contributed to shape genome architecture and led to the emergence of genetic innovations in different eukaryotic lineages.

The impact of dissociation on transposon-mediated disease control strategies

Vector-borne diseases such as malaria and dengue fever continue to be a major health concern through much of the world. The emergence of chloroquine-resistant strains of malaria and insecticide-resistant mosquitoes emphasize the need for novel methods of disease control. Recently, there has been much interest in the use of transposable elements to drive resistance genes into vector populations as a means of disease control. One concern that must be addressed before a release is performed is the potential loss of linkage between a transposable element and a resistance gene. Transposable elements such as P and hobo have been shown to produce internal deletion derivatives at a significant rate, and there is concern that a similar process could lead to loss of the resistance gene from the drive system following a transgenic release. Additionally, transposable elements such as Himar1 have been shown to transpose significantly more frequently when free of exogenous DNA. Here, we show that any transposon-mediated gene drive strategy must have an exceptionally low rate of dissociation if it is to be effective. Additionally, the resistance gene must confer a large selective advantage to the vector to surmount the effects of a moderate dissociation rate and transpositional handicap.

The hermes transposon of Musca domestica is an efficient tool for the mutagenesis of Schizosaccharomyces pombe

Currently, no transposon-based method for the mutagenesis of Schizosaccharomyces pombe exists. We have developed such a system based on the introduction of the hermes transposon from the housefly into S. pombe. This system efficiently disrupts open reading frames and allows the insertion sites to be readily identified.

Genome organization and gene expression shape the transposable element distribution in the Drosophila melanogaster euchromatin

The distribution of transposable elements (TEs) in a genome reflects a balance between insertion rate and selection against new insertions. Understanding the distribution of TEs therefore provides insights into the forces shaping the organization of genomes. Past research has shown that TEs tend to accumulate in genomic regions with low gene density and low recombination rate. However, little is known about the factors modulating insertion rates across the genome and their evolutionary significance. One candidate factor is gene expression, which has been suggested to increase local insertion rate by rendering DNA more accessible. We test this hypothesis by comparing the TE density around germline- and soma-expressed genes in the euchromatin of Drosophila melanogaster. Because only insertions that occur in the germline are transmitted to the next generation, we predicted a higher density of TEs around germline-expressed genes than soma-expressed genes. We show that the rate of TE insertions is greater near germline- than soma-expressed genes. However, this effect is partly offset by stronger selection for genome compactness (against excess noncoding DNA) on germline-expressed genes. We also demonstrate that the local genome organization in clusters of coexpressed genes plays a fundamental role in the genomic distribution of TEs. Our analysis shows that-in addition to recombination rate-the distribution of TEs is shaped by the interaction of gene expression and genome organization. The important role of selection for compactness sheds a new light on the role of TEs in genome evolution. Instead of making genomes grow passively, TEs are controlled by the forces shaping genome compactness, most likely linked to the efficiency of gene expression or its complexity and possibly their interaction with mechanisms of TE silencing.

Transposon display supports transpositional activity of P elements in species of the saltans group of Drosophila

Mobilization of two P element subfamilies (canonical and O-type) from Drosophila sturtevanti and D. saltans was evaluated for copy number and transposition activity using the transposon display (TD) technique. Pairwise distances between strains regarding the insertion polymorphism profile were estimated. Amplification of the P element based on copy number estimates was highly variable among the strains (D. sturtevanti, canonical 20.11, O-type 9.00; D. saltans, canonical 16.4, O-type 12.60 insertions, on average). The larger values obtained by TD compared to our previous data by Southern blotting support the higher sensitivity of TD over Southern analysis for estimating transposable element copy numbers. The higher numbers of the canonical P element and the greater divergence in its distribution within the genome of D. sturtevanti (24.8%) compared to the O-type (16.7%), as well as the greater divergence in the distribution of the canonical P element, between the D. sturtevanti (24.8%) and the D. saltans (18.3%) strains, suggest that the canonical element occupies more sites within the D. sturtevanti genome, most probably due to recent transposition activity. These data corroborate the hypothesis that the O-type is the oldest subfamily of P elements in the saltans group and suggest that the canonical P element is or has been transpositionally active until more recently in D. sturtevanti.

Post-integration stability of piggyBac in Aedes aegypti

The post-integration activity of piggyBac transposable element gene vectors in Aedes aegypti mosquitoes was tested under a variety of conditions. The embryos from five independent transgenic lines of Ae. aegypti, each with a single integrated non-autonomous piggyBac transposable element gene vector, were injected with plasmids containing the piggyBac transposase open-reading frame under the regulatory control of the Drosophila melanogaster hsp70 promoter. No evidence for somatic remobilization was detected in the subsequent adults whereas somatic remobilization was readily detected when similar lines of transgenic D. melanogaster were injected with the same piggyBac transposase-expressing plasmid. Ae. aegypti heterozygotes of piggyBac reporter-containing transgenes and piggyBac transposase-expressing transgenes showed no evidence of somatic and germ-line remobilization based on phenotypic and molecular detection methods. The post-integration mobility properties of piggyBac in Ae. aegypti enhance the utility of this gene vector for certain applications, particularly those where any level of vector remobilization is unacceptable.

Post-integration behavior of a Minos transposon in the malaria mosquito Anopheles stephensi

Transposable elements represent important tools to perform functional studies in insects. In Drosophila melanogaster, the remobilization properties of transposable elements have been utilized for enhancer-trapping and insertional mutagenesis experiments, which have considerably helped in the functional characterization of the fruitfly genome. In Anopheles mosquitoes, the sole vectors of human malaria, as well as in other mosquito vectors of disease, the use of transposons has also been advocated to achieve the spread of anti-parasitic genes throughout field populations. Here we report on the post-integration behavior of the Minos transposon in both the germ-line and somatic tissues of Anopheles mosquitoes. Transgenic An. stephensi lines developed using the piggyBac transposon and expressing the Minos transposase were tested for their ability to remobilize an X-linked Minos element. Germ-line remobilization events were not detected, while somatic excisions and transpositions were consistently recovered. The analysis of these events showed that Minos activity in Anopheles cells is characterized by unconventional functionality of the transposon. In the two cases analyzed, re-integration of the transposon occurred onto the same X chromosome, suggesting a tendency for local hopping of Minos in the mosquito genome. This is the first report of the post-integration behavior of a transposable element in a human malaria vector.

Transposable element dynamics of the hAT element Herves in the human malaria vector Anopheles gambiae s.s

Transposable elements are being considered as genetic drive agents for introducing phenotype-altering genes into populations of vectors of human disease. The dynamics of endogenous elements will assist in predicting the behavior of introduced elements. Transposable element display was used to estimate the site-occupancy frequency distribution of Herves in six populations of Anopheles gambiae s.s. The site-occupancy distribution data suggest that the element has been recently active within the sampled populations. All 218 individuals sampled contained at least one copy of Herves with a mean of 3.6 elements per diploid genome. No significant differences in copy number were observed among populations. Nucleotide polymorphism within the element was high (pi = 0.0079 in noncoding sequences and 0.0046 in coding sequences) relative to that observed in some of the more well-studied elements in Drosophila melanogaster. In total, 33 distinct forms of Herves were found on the basis of the sequence of the first 528 bp of the transposase open reading frame. Only two forms were found in all six study populations. Although Herves elements in An. gambiae are quite diverse, 85% of the individuals examined had evidence of complete forms of the element. Evidence was found for the lateral transfer of Herves from an unknown source into the An. gambiae lineage prior to the diversification of the An. gambiae species complex. The characteristics of Herves in An. gambiae are somewhat unlike those of P elements in D. melanogaster.

hAT element population genetics in Anopheles gambiae s.l. in Mozambique

Herves is a functional Class II transposable element in Anopheles gambiae belonging to the hAT superfamily of elements. Class II transposable elements are used as gene vectors in this species and are also being considered as genetic drive agents for spreading desirable genes through natural populations as part of an effort to control malaria transmission. In this study, Herves was investigated in populations of Anopheles gambiae s.s., Anopheles arabiensis and Anopheles merus in Mozambique over a period of 2 years. The copy number of Herves within these three species was approximately 5 copies per diploid genome and did not differ among species or between years. Based on the insertion-site occupancy-frequency distribution and existing models of transposable element dynamics, Herves appears to be transpositionally active currently or, at least recently, in all species tested. Ninety-five percent of the individuals within the populations of the three species tested contained intact elements with complete Herves transposase genes and this is consistent with the idea that these elements are currently active.

Molecular marker systems in insects: current trends and future avenues

Insects comprise the largest species composition in the entire animal kingdom and possess a vast undiscovered genetic diversity and gene pool that can be better explored using molecular marker techniques. Current trends of application of DNA marker techniques in diverse domains of insect ecological studies show that mitochondrial DNA (mtDNA), microsatellites, random amplified polymorphic DNA (RAPD), expressed sequence tags (EST) and amplified fragment length polymorphism (AFLP) markers have contributed significantly for progresses towards understanding genetic basis of insect diversity and for mapping medically and agriculturally important genes and quantitative trait loci in insect pests. Apart from these popular marker systems, other novel approaches including transposon display, sequence-specific amplification polymorphism (S-SAP), repeat-associated polymerase chain reaction (PCR) markers have been identified as alternate marker systems in insect studies. Besides, whole genome microarray and single nucleotide polymorphism (SNP) assays are becoming more popular to screen genome-wide polymorphisms in fast and cost effective manner. However, use of such methodologies has not gained widespread popularity in entomological studies. The current study highlights the recent trends of applications of molecular markers in insect studies and explores the technological advancements in molecular marker tools and modern high throughput genotyping methodologies that may be applied in entomological researches for better understanding of insect ecology at molecular level.

Proceedings of the SMBE Tri-National Young Investigators' Workshop 2005. Unusual evolution of interspersed repeat sequences in the Drosophila ananassae subgroup

New repeat sequences were found in the Drosophila ananassae genome sequence. They accounted for approximately 1.2% of the D. ananassae genome and were estimated to be more abundant in genomes of its closely related species belonging to the Drosophila bipectinata complex, whereas it was entirely absent in the Drosophila melanogaster genome. They were interspersed throughout euchromatic regions of the genome, usually as short tandem arrays of unit sequences, which were mostly 175-200 bp long with two distinct peaks at 180 and 189 bp in the length distribution. The nucleotide differences among unit sequences within the same array (locus) were much smaller than those between separate loci, suggesting within-locus concerted evolution. The phylogenetic tree of the repeat sequences from different loci showed that divergences between sequences from different chromosome arms occurred only at earlier stages of evolution, while those within the same chromosome arm occurred thereafter, resulting in the increase in copy number. We found RNA polymerase III promoter sequences (A box and B box), which play a critical role in retroposition of short interspersed elements. We also found conserved stem-loop structures, which are possibly associated with certain DNA rearrangements responsible for the increase in copy number within a chromosome arm. Such an atypical combination of characteristics (i.e., wide dispersal and tandem repetition) may have been generated by these different transposition mechanisms during the course of evolution.

Transposable element insertion location bias and the dynamics of gene drive in mosquito populations

Some vector-borne disease control strategies using transgenic mosquitoes require transgene spread to high frequency in populations. Transposable elements (TEs) are DNA sequences that replicate and transpose within the genomes of other organisms and may therefore be represented in the next generation in higher frequencies than predicted by Mendelian segregation. This over-representation has allowed some TEs to spread through natural populations. Transgenes incorporated within a TE sequence are expected to be driven into populations as long as there is a positive balance between fitness costs and over-representation. Models have been used to examine parameters that affect this balance but did not take into account biased insertion of TEs to linked sites in the genome. A simulation model was created to examine the impact of insertion bias on TE spread in mosquito populations. TEs that induce no fitness costs are predicted to increase in frequency over a wide range of parameter values but spread is slower for lower levels of transposition and non-local movement. If TEs are costly, high proportions of local movement can slow or halt spread. To function as a robust transgene drive mechanism a TE should replicate and transpose > 10%/insert/generation, induce < 1% fitness cost/insert, and move preferentially to unlinked sites in the genome.

Site-directed genome modification: derivatives of DNA-modifying enzymes as targeting tools

The modification of mammalian genomes is an important goal in gene therapy and animal transgenesis. To generate stable genetic and biochemical changes, the therapeutic genes or transgenes need to be incorporated into the host genome. Ideally, the integration of the foreign gene should occur at sites that ensure their continual expression in the absence of any unwanted side effects on cellular metabolism. In this article, we discuss the opportunities provided by natural DNA-modifying enzymes, such as transposases, recombinases and integrases, to mediate the stable integration of foreign genes into host genomes. In addition, we discuss the approaches that have been taken to improve the efficiency and to modify the site-specificity of these enzymes.

An active transposable element, Herves, from the African malaria mosquito Anopheles gambiae

Transposable elements have proven to be invaluable tools for genetically manipulating a wide variety of plants, animals, and microbes. Some have suggested that they could be used to spread desirable genes, such as refractoriness to Plasmodium infection, through target populations of Anopheles gambiae, thereby disabling the mosquito's ability to transmit malaria. To achieve this, a transposon must remain mobile and intact after the initial introduction into the genome. Endogenous, active class II transposable elements from An. gambiae have not been exploited as gene vectors/drivers because none have been isolated. We report the discovery of an active class II transposable element, Herves, from the mosquito An. gambiae. Herves is a member of a distinct subfamily of hAT elements that includes the hopper-we element from Bactrocera dorsalis and B. cucurbitae. Herves was transpositionally active in mobility assays performed in Drosophila melanogaster S2 cells and developing embryos and was used as a germ-line transformation vector in D. melanogaster. Herves displays an altered target-site preference from the distantly related hAT elements, Hermes and hobo. Herves is also present in An. arabiensis and An. merus with copy numbers similar to that found in An. gambiae. Preliminary data from an East African population are consistent with the element being transpositionally active in mosquitoes.

CemaT1 is an active transposon within the Caenorhabditis elegans genome

The maT clade of transposons is a group of transposable elements intermediate in sequence and predicted protein structure to mariner and Tc transposons, with a distribution thus far limited to a few invertebrate species. In the nematode Caenorhabditis elegans, there are eight copies of CemaT1 that are predicted to encode a functional transposase, with five copies being >99% identical. We present evidence, based on searches of publicly available databases and on PCR-based mobility assays, that the CemaT1 transposase is expressed in C. elegans and that the CemaT transposons are capable of excising in both somatic and germline tissues. We also show that the frequency of CemaT1 excisions within the genome of the N2 strain of C. elegans is comparable to that of the Tc1 transposon. However, unlike Tc transposons in mutator strains of C. elegans, maT transposons do not exhibit increased frequencies of mobility, suggesting that maT is not regulated by the same factors that control Tc activity in these strains. Finally, we show that CemaT1 transposons are capable of precise transpositions as well as orientation inversions at some loci, and thereby become members of an increasing number of identified active transposons within the C. elegans genome.

Tn5 as an insect gene vector

The purpose of this study was to explore alternatives to insect-derived transposable elements as insect gene vectors with the intention of improving existing insect transgenesis methods. The mobility properties of the bacterial transposon, Tn5, were tested in mosquitoes using a transient transposable element mobility assay and by attempting to create transgenic insects. Tn5 synaptic complexes were assembled in vitro in the absence of Mg(2+) and co-injected with a target plasmid into developing yellow fever mosquito, Aedes aegypti, embryos. Target plasmids recovered from embryos a day later were screened for the presence of Tn5. Recombinants (transposition events) were found at a frequency of 1.2 x 10(-3). Some transposition events did not appear to be associated with canonical 9 bp direct duplications at the site of insertion and also were associated with either deletions or rearrangements. A Tn5 element containing the brain-specific transgene, 3 x P3DsRed, was assembled into synaptic complexes in vitro and injected into pre-blastoderm embryos of Ae. aegypti. Of the approximately 900 embryos surviving injection and developing into adults, two produced transgenic progeny. Both transgenic events involved the co-integrations of approximately five elements resulting in nested and tandem arrayed Tn5::3 x P3DsRed elements. This study extends the known host range of Tn5 to insects and makes available to insect biologists and others another eukaryotic genome-manipulation tool. The hyperactivity of synaptic complexes may be responsible for the unusual clustering of elements and managing this aspect of the element's behavior will be important in future applications of this technology to insects.

Assessing fitness costs for transgenic Aedes aegypti expressing the GFP marker and transposase genes

The development of transgenic mosquitoes that are refractory to the transmission of human diseases such as malaria, dengue, and yellow fever has received much interest due to the ability to transform a number of vector mosquito species with transposable elements. Transgenic strains of mosquitoes have been generated with molecular techniques that exhibit a reduced capacity to transmit pathogens. These advancements have led to questions regarding the fitness of transgenic mosquitoes and the ability of transformed mosquitoes to compete and effectively spread beneficial genes through nontransformed field populations, the core requirement of a genetically based control strategy aimed at reducing the spread of mosquito-borne human disease. Here we examine the impact of transgenesis on the fitness of Aedes aegypti, a mosquito that transmits yellow fever. Mosquitoes were altered with two types of transgene, the enhanced GFP gene and two transposase genes from the Hermes and MOS1 transposable elements. We examined the effects of these elements on the survivorship, longevity, fecundity, sex ratio, and sterility of transformed mosquitoes and compared results to the nontransformed laboratory strain. We show that demographic parameters are significantly diminished in transgenic mosquitoes relative to the untransformed laboratory strain. Reduced fitness in transgenic mosquitoes has important implications for the development and utilization of this technology for control programs based on manipulative molecular modification.

Sex determination in Drosophila melanogaster and Musca domestica converges at the level of the terminal regulator doublesex

Sex-determining cascades are supposed to have evolved in a retrograde manner from bottom to top. Wilkins' 1995 hypothesis finds support from our comparative studies in Drosophila melanogaster and Musca domestica, two dipteran species that separated some 120 million years ago. The sex-determining cascades in these flies differ at the level of the primary sex-determining signal and their targets, Sxl in Drosophila and F in Musca. Here we present evidence that they converge at the level of the terminal regulator, doublesex ( dsx), which conveys the selected sexual fate to the differentiation genes. The dsx homologue in Musca, Md-dsx, encodes male-specific (MdDSX(M)) and female-specific (MdDSX(F)) protein variants which correspond in structure to those in Drosophila. Sex-specific regulation of Md-dsx is controlled by the switch gene F via a splicing mechanism that is similar but in some relevant aspects different from that in Drosophila. MdDSX(F) expression can activate the vitellogenin genes in Drosophila and Musca males, and MdDSX(M) expression in Drosophila females can cause male-like pigmentation of posterior tergites, suggesting that these Musca dsx variants are conserved not only in structure but also in function. Furthermore, downregulation of Md-dsx activity in Musca by injecting dsRNA into embryos leads to intersexual differentiation of the gonads. These results strongly support a role of Md-dsx as the final regulatory gene in the sex-determining hierarchy of the housefly.

Generating and manipulating transgenic animals using transposable elements

Transposable elements, or transposons, have played a significant role in the history of biological research. They have had a major influence on the structure of genomes during evolution, they can cause mutations, and their study led to the concept of so-called "selfish DNA". In addition, transposons have been manipulated as useful gene transfer vectors. While primarily restricted to use in invertebrates, prokaryotes, and plants, it is now clear that transposon technology and biology are just as relevant to the study of vertebrate species. Multiple transposons now have been shown to be active in vertebrates and they can be used for germline transgenesis, somatic cell transgenesis/gene therapy, and random germline insertional mutagenesis. The sophistication of these applications and the number of active elements are likely to increase over the next several years. This review covers the vertebrate-active retrotransposons and transposons that have been well studied and adapted for use as gene transfer agents. General considerations and predictions about the future utility of transposon technology are discussed.

Gene vector and transposable element behavior in mosquitoes

The development of efficient germ-line transformation technologies for mosquitoes has increased the ability of entomologists to find, isolate and analyze genes. The utility of the currently available systems will be determined by a number of factors including the behavior of the gene vectors during the initial integration event and their behavior after chromosomal integration. Post-integration behavior will determine whether the transposable elements being employed currently as primary gene vectors will be useful as gene-tagging and enhancer-trapping agents. The post-integration behavior of existing insect vectors has not been extensively examined. Mos1 is useful as a primary germ-line transformation vector in insects but is inefficiently remobilized in Drosophila melanogaster and Aedes aegypti. Hermes transforms D. melanogaster efficiently and can be remobilized in this species. This element is also useful for creating transgenic A. aegypti, but its mode of integration in mosquitoes results in the insertion of flanking plasmid DNA. Hermes can be remobilized in the soma of A. aegypti and transposes using a common cut-and-paste mechanism; however, the element does not remobilize in the germ line. piggyBac can be used to create transgenic mosquitoes and occasionally integrates using a mechanism other than a simple cut-and-paste mechanism. Preliminary data suggest that remobilization is infrequent. Minos also functions in mosquitoes and, like the other gene vectors,appears to remobilize inefficiently following integration. These results have implications for future gene vector development efforts and applications.