Selective capture and sensitive fluorometric determination of Pseudomonas aeruginosa by using aptamer modified magnetic nanoparticles

Low-speed centrifugation based isolation and self-priming mediated chain extension based fluorescent quantification of Pseudomonasaeruginosa

Infections acquired at home and hospital are rather prevalent, and the incidence of these infections has been on the rise in recent years due to the growing elderly population. Infections caused by Pseudomonas aeruginosa (P. aeruginosa) pose a significant risk to human health and are prevalent among patients in hospitals and nursing homes. Consequently, it is imperative to devise an innovative and fluorescent method for analyzing P. aeruginosa to facilitate the early identification of home-acquired pneumonia. However, it is difficult to isolate and simultaneously quantify P. aeruginosa using most of the currently available methods. We present a novel platform that combines aptamer recognition-based aggregation of target bacteria with self-priming induced chain extension for signal amplification. This approach facilitates low-speed centrifugation-based isolation and simultaneous quantification of P. aeruginosa. The chain displacement procedure is incorporated for signal amplification, providing the approach with a broad detection range of six orders of magnitude and a low detection limit of 2.4 cfu/mL. In addition to its exceptional sensitivity, the method demonstrates commendable selectivity for the detection of P. aeruginosa, rendering it a viable instrument for identifying home-acquired pneumonia caused by P. aeruginosa and facilitating the early management of P. aeruginosa infections in the emergency department.

Innovations in aptamer-based biosensors for detection of pathogenic bacteria: Recent advances and perspective

The rapid and accurate detection of pathogenic bacteria is a pressing concern in the fields of public health, food safety, and environmental monitoring. However, traditional methods often prove to be slow and difficult to quantify accurately. Thus, there is a pressing need to develop advanced methods that enable rapid detection which is sensitive and inexpensive. Aptamers, which are short nucleic acid sequences derived through a process called systematic evolution of ligands by exponential enrichment (SELEX), offer a promising alternative due to their unique binding characteristics. These properties confer several advantages over traditional antibodies, making aptamers effective and versatile bioreceptors for pathogen detection. Recent advancements have led to the development of various aptamer-based biosensors utilizing diverse signaling strategies, including optical, electrochemical, mass-based, paper-based and microchip capillary electrophoresis (MCE) methods. The integration of nanomaterials with aptamer technology has further enhanced biosensor performance by improving sensitivity and enabling real-time monitoring of bacterial contamination. In this review, the focus is on current developments in aptamer-based biosensors and their potential applications in clinical diagnostics, food safety and environmental monitoring. As research progresses, the customization of aptamer sequences for specific targets is expected to yield tailored diagnostic solutions, ultimately improving patient outcomes and public health responses. The continued exploration of aptamer technology marks a significant advancement in methodologies for detecting pathogenic bacteria, highlighting not only the promise of aptamers as effective detection tools but also the critical need for multidisciplinary collaboration, integrating molecular biology, materials science, and microfluidics, to overcome challenges in this field.

Wastewater-borne viruses and bacteria, surveillance and biosensors at the interface of academia and field deployment

Wastewater is a complex, but an ideal, matrix for disease monitoring and surveillance as it represents the entire load of enteric pathogens from a local catchment area. It captures both clinical and community disease burdens. Global interest in wastewater surveillance has been growing rapidly for infectious diseases monitoring and for providing an early warning of potential outbreaks. Although molecular detection methods show high sensitivity and specificity in pathogen monitoring from wastewater, they are strongly limited by challenges, including expensive laboratory settings and prolonged sample processing and analysis. Alternatively, biosensors exhibit a wide range of practical utility in real-time monitoring of biological and chemical markers. However, field deployment of biosensors is primarily challenged by prolonged sample processing and pathogen concentration steps due to complex wastewater matrices. This review summarizes the role of wastewater surveillance and provides an overview of infectious viral and bacterial pathogens with cutting-edge technologies for their detection. It emphasizes the practical utility of biosensors in pathogen monitoring and the major bottlenecks for wastewater surveillance of pathogens, and overcoming approaches to field deployment of biosensors for real-time pathogen detection. Furthermore, the promising potential of novel machine learning algorithms to resolve uncertainties in wastewater data is discussed.

Nanoparticle-Enhanced Acoustic Wave Biosensor Detection of Pseudomonas aeruginosa in Food

A biosensor was designed for detecting Pseudomonas aeruginosa (P. aeruginosa) bacteria in whole milk samples. The sensing layer involved the antifouling linking molecule 3-(2-mercaptoethanoxy)propanoic acid (HS-MEG-COOH), which was covalently linked to an aptamer for binding P. aeruginosa. The aptasensor uses the thickness shear mode (TSM) system for mass-sensitive acoustic sensing of the bacterium. High concentrations (105 CFU mL-1) of nonspecific bacteria, E. coli, S. aureus, and L. acidophilus, were tested with the aptasensor and caused negligible frequency shifts compared to P. aeruginosa. The aptasensor has high selectivity for P. aeruginosa, with an extrapolated limit of detection (LOD) of 86 CFU mL-1 in phosphate-buffered saline (PBS) and 157 CFU mL-1 in milk. To improve the sensitivity of the sensor, gold nanoparticles (AuNPs) were functionalized with the same aptamer for P. aeruginosa and flowed through the sensor following bacteria, reducing the extrapolated LOD to 68 CFU mL-1 in PBS and 46 CFU mL-1 in milk. The frequency variations in the aptasensor are proportional to various concentrations of P. aeruginosa (102-105 CFU mL-1) with and without AuNPs, respectively. The low and rapid mass-sensitive detection demonstrates the ability of the aptasensor to quantitatively identify bacterial contamination in buffer and milk.

Sandwich-type electrochemical aptasensor based on hemin-graphite oxide as a signal label and rGO/MWCNTs/chitosan/carbon quantum dot modified electrode for sensitive detection of Acinetobacter baumannii bacteria

Acinetobacter baumannii (A. baumannii) is a pathogenic bacterium that causes severe infections and its rapid and reliable diagnosis is essential for effective control and treatment. In this study, we present an electrochemical aptasensor based on a signal amplification strategy for the detection of A. baumannii, the high specificity and affinity of the aptamer for the target make it favorable for signal amplification. This allows for a highly sensitive and selective detection of the target. The aptasensor is based on a carbon screen-printed electrode (CSPE) that has been modified with a nanocomposite consisting of multi-walled carbon nanotubes (MWCNTs), reduced graphene oxide (rGO), chitosan (CS), and a synthesized carbon quantum dot (CQD) from CS. Additionally, the self-assembled aptamers were immobilized on hemin-graphite oxide (H-GO) as a signal probe. The composition of the nanocomposite (rGO-MWCNT/CS/CQD) provides high conductivity and stability, facilitating the efficient capture of A. baumannii onto the surface of the aptasensor. Also, aptamer immobilized on Hemin-graphite oxide (H-GO/Aptamer) was utilized as an electrochemical signal reporter probe by H reduction. This approach improved the detection sensitivity and the aptamer surface density for detecting A. baumannii. Furthermore, under optimized experimental conditions, the aptasensor was demonstrated to be capable of detecting A. baumannii with a linear range of (10 - 1 × 107 Colony-forming unit (CFU)/mL) and a limit of detection (LOD) of 1 CFU/mL (σ = 3). One of the key features of this aptasensor is its ability to distinguish between live and dead bacteria cells, which is very important and critical for clinical applications. In addition, we have successfully detected A. baumannii bacteria in healthy human serum and skim milk powder samples provided using the prepared electrochemical aptasensor. The functional groups present in the synthetic CQD, rGO-MWCNT, and chitosan facilitate biomolecule immobilization and enhance stability and activity. The fast electron-transfer kinetics and high conductivity of these materials contribute to improved sensitivity and selectivity. Furthermore, The H-GO/Aptamer composite's large surface area increases the number of immobilized secondary aptamers and enables a more stable structure. This large surface area also facilitates more H loading, leading to signal amplification.

Nucleic acid strand displacement for indirect determination of foodborne bacteria by capillary electrophoresis and its application in antagonism and bacteriostasis studies

Foodborne bacteria threaten human's health. Capillary electrophoresis (CE) is a powerful separation means for the determination of bacteria. Direct separation of bacteria suffers from the shortages of low resolution, channel adsorption, and bacterial aggregation. In this work, a method of nucleic acid strand displacement was developed to indirect separate the bacteria by CE. DNA complexes, consisting of probes and aptamers, were mixed with the three bacteria Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. The aptamers could specifically bond with bacteria and release the probes. Through the separation of the probes, the bacteria could be indirectly determined by CE. This method avoided the shortages of direct separation of bacteria. Under the optimized conditions, the three probes for the bacteria could be separated and detected within 2.5 min by high-speed CE with laser-induced fluorescence detection. The limits of detection for the bacteria were in the range 4.20 × 106 to 1.75 × 107  CFU/mL. Finally, the developed method was applied on the study of antagonism of the coexistent bacteria to reveal the relationship between them. Furthermore, the efficiency of bacteriostasis of three traditional Chinese medicines, Coptis chinensis, Schisandra chinensis, and honeysuckle, was also studied by this method.

Aptamers: A Cutting-Edge Approach for Gram-Negative Bacterial Pathogen Identification

Early and accurate diagnoses of pathogenic microorganisms is essential to correctly identify diseases, treating infections, and tracking disease outbreaks associated with microbial infections, to develop precautionary measures that allow a fast and effective response in epidemics and pandemics, thus improving public health. Aptamers are a class of synthetic nucleic acid molecules with the potential to be used for medical purposes, since they can be directed towards any target molecule. Currently, the use of aptamers has increased because they are a useful tool in the detection of specific targets. We present a brief review of the use of aptamers to detect and identify bacteria or even some toxins with clinical importance. This work describes the advances in the technology of aptamers, with the purpose of providing knowledge to develop new aptamers for diagnoses and treatment of different diseases caused by infectious microorganisms.

Diagnosis and Therapeutic Strategies Based on Nucleic Acid Aptamers Selected against Pseudomonas aeruginosa: The Challenge of Cystic Fibrosis

Antimicrobial resistance (AMR) is a rapidly spreading global health problem, and approximately five million deaths associated with AMR pathogens were identified prior to the COVID-19 pandemic. Pseudomonas aeruginosa has developed increasing AMR, and in patients with cystic fibrosis (CF) colonized by this bacterium, rare phenotypes have emerged that complicate the diagnosis and treatment of the hosts, in addition to multiple associated "epidemic strains" with high morbidities and mortalities. The conjugation of aptamers with fluorochromes or nanostructures has allowed the design of new identification strategies for Pseudomonas aeruginosa with detection limits of up to 1 cell ⋅ mL-1 , and the synergy of aptamers with antibiotics, antimicrobial peptides and nanostructures has exhibited promising therapeutic qualities. Some selected aptamers against this bacterium have shown intrinsic antimicrobial activity. However, these aptamers have been poorly evaluated in clinical isolates and have shown decreased interactions for CF isolates, demonstrating, in these cases, uncommon phenotypes resulting from the selective qualities of this disease as well as the great adaptive capacity of the pathogen. Therefore, finding an aptamer or set of aptamers that have the ability to recognize strange phenotypes of this bacillus is crucial in the battle against AMR.

A smartphone-based fluorescent sensor for rapid detection of multiple pathogenic bacteria

In this study, we developed a fluorescent sensor for the sensitive detection of multiple pathogenic bacteria based on magnetic separation, fluorescent probes, and smartphone image processing. A microchannel device was assembled using high-transparency resin and 3D printing technology. This device was combined with a smartphone and an external lens to develop a fluorescent sensor for autonomous detection of multiple pathogenic bacteria. Three fluorescence probes with different fluorescence were synthesized from highly specific aptamers and tetraphenylethylene derivatives. These fluorescent probes can make Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa emit different colors of fluorescence. Using the enrichment performance of molecularly imprinted materials, separation and detection of bacteria can be achieved simultaneously. Finally, with the Red-Green-Blue (RGB) analysis functionality of a smartphone, real-time field detection was realized with a sensitivity of 102 CFU/mL and a detection time of 40 min. This work provides a simple, inexpensive, and real-time sensor for the detection of multiple pathogens in medical diagnostics, food testing, and environmental analyses.

Sensitive and Direct Analysis of Pseudomonas aeruginosa through Self-Primer-Assisted Chain Extension and CRISPR-Cas12a-Based Color Reaction

Pseudomonas aeruginosa (P. aeruginosa) is a common opportunistic Gram-negative pathogen that may cause infections to immunocompromised patients. However, sensitive and reliable analysis of P. aeruginosa remains a huge challenge. In this method, target recognition assists the formation of a self-primer and initiates single-stranded chain production. The produced single-stranded DNA chain is identified by CRISPR-Cas12a, and consequently, the trans-cleavage activity of the Cas12a enzyme is activated to parallelly digest Ag+ aptamer sequences that are chelated with silver ions (Ag+). The released Ag+ reacted with 3,3',5,5'-tetramethylbenzidine (TMB) for coloring. Compared with the traditional color developing strategies, which mainly rely on the DNA hybridization, the color developing strategy in this approach exhibits a higher efficiency due to the robust trans-cleavage activity of the Cas12a enzyme. Consequently, the method shows a low limit of detection of a wide detection of 5 orders of magnitudes and a low limit of detection of 21 cfu/mL, holding a promising prospect in early diagnosis of infections. Herein, we develop a sensitive and reliable method for direct and colorimetric detection of P. aeruginosa by integrating self-primer-assisted chain production and CRISPR-Cas12a-based color reaction and believe that the established approach will facilitate the development of bacteria-analyzing sensors.

Conventional and advanced detection techniques of foodborne pathogens: A comprehensive review

Foodborne pathogens are a major public health concern and have a significant economic impact globally. From harvesting to consumption stages, food is generally contaminated by viruses, parasites, and bacteria, which causes foodborne diseases such as hemorrhagic colitis, hemolytic uremic syndrome (HUS), typhoid, acute, gastroenteritis, diarrhea, and thrombotic thrombocytopenic purpura (TTP). Hence, early detection of foodborne pathogenic microbes is essential to ensure a safe food supply and to prevent foodborne diseases. The identification of foodborne pathogens is associated with conventional (e.g., culture-based, biochemical test-based, immunological-based, and nucleic acid-based methods) and advances (e.g., hybridization-based, array-based, spectroscopy-based, and biosensor-based process) techniques. For industrial food applications, detection methods could meet parameters such as accuracy level, efficiency, quickness, specificity, sensitivity, and non-labor intensive. This review provides an overview of conventional and advanced techniques used to detect foodborne pathogens over the years. Therefore, the scientific community, policymakers, and food and agriculture industries can choose an appropriate method for better results.

Sandwich-Type Electrochemical Aptasensor for Highly Sensitive and Selective Detection of Pseudomonas Aeruginosa Bacteria Using a Dual Signal Amplification Strategy

An electrochemical aptasensor developed to realize the detection of Pseudomonas aeruginosa (P. aeruginosa) bacteria based on a signal amplification strategy. The carbon screen-printed electrode (CSPE) surface was modified by MIL-101(Cr)/Multi-walled carbon nanotubes (MWCNT), which significantly increased the effective surface area of the electrode, thus resulting in further F23 aptamer immobilization at the surface of the modified electrode. As a result, the P. aeruginosa can be efficiently captured onto the surface of the aptasensor. Moreover, aptamer immobilized on the two-dimensional graphitic carbon nitride complex with silver nanoparticles (AgNPs/c-g-C₃N₄/Apt) was used as an electrochemical signal label, connected to P. aeruginosa bacteria at the modified electrode. This strategy increased the aptamer surface density and the sensitivity for detecting P. aeruginosa. Also, the resultant material was thoroughly characterized using Fourier transform infrared (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) analysis techniques. A highly sensitive voltammetric aptasensor for P. aeruginosa detection was obtained via this strategy at the limit of detection of 1 Colony-forming unit (CFU)/mL (σ = 3). Therefore, this proposed strategy with dual signal amplification can be a promising platform for simple, practical, reliable, and sensitive method for P. aeruginosa.

Low-speed centrifugation based isolation and Personal Glucose Meter assisted synchronous quantification of Pseudomonas aeruginosa in nursing home-acquired pneumonia

Home-acquired pneumonia is a common infection and the incidence has increased in recent years as the population ages. Pseudomonas aeruginosa (P. aeruginosa) is common in nursing home residents and in hospital infections, providing a huge threat to human health. Therefore, it is essential to develop a novel and portable P. aeruginosa analysis method for the early diagnosis of home-acquired pneumonia. Few of the established approaches enable isolation and synchronous quantification of P. aeruginosa. Herein, we propose a novel platform by integrating aptamer recognition-based aggregation of target bacteria and personal glucose meters (PGMs) based readout of results. Based on this, the method enables low-speed centrifugation (4193 g) based isolation and personal glucose meter assisted synchronous quantification of P. aeruginosa. In addition, the chain displacement process is included for signal amplification that endows the method with a wide detection range of six orders of magnitudes and a low limit of detection of 36 cfu/mL. Besides the excellent sensitivity, the approach also shows a good selectivity to P. aeruginosa detection, making it a promising tool to report P. aeruginosa based home-acquired pneumonia and guiding the early-nursing of P. aeruginosa infections at the emergency department.

Magnetic Nanoseparation Technology for Efficient Control of Microorganisms and Toxins in Foods: A Review

Outbreaks of foodborne diseases mediated by food microorganisms and toxins remain one of the leading causes of disease and death worldwide. It not only poses a serious threat to human health and safety but also imposes a huge burden on health care and socioeconomics. Traditional methods for the removal and detection of pathogenic bacteria and toxins in various samples such as food and drinking water have certain limitations, requiring a rapid and sensitive strategy for the enrichment and separation of target analytes. Magnetic nanoparticles (MNPs) exhibit excellent performance in this field due to their fascinating properties. The strategy of combining biorecognition elements with MNPs can be used for fast and efficient enrichment and isolation of pathogens. In this review, we describe new trends and practical applications of magnetic nanoseparation technology in the detection of foodborne microorganisms and toxins. We mainly summarize the biochemical modification and functionalization methods of commonly used magnetic nanomaterial carriers and discuss the application of magnetic separation combined with other instrumental analysis techniques. Combined with various detection techniques, it will increase the efficiency of detection and identification of microorganisms and toxins in rapid assays.

Aptamer-based biosensors for Pseudomonas aeruginosa detection

Pseudomonas aeruginosa possesses innate antibiotic resistance mechanisms, and carbapenem-resistant Pseudomonas aeruginosa has been considered the number one priority in the 2017 WHO list of antimicrobial-resistant crucial hazards. Early detection of Pseudomonas aeruginosa can circumvent treatment challenges. Various techniques have been developed for the detection of P. aeruginosa detection. Biosensors have recently attracted unprecedented attention in the field of point-of-care diagnostics due to their easy operation, rapid, low cost, high sensitivity, and selectivity. Biosensors can convert the specific interaction between bioreceptors (antibodies, aptamers) and pathogens into optical, electrical, and other signal outputs. Aptamers are novel and promising alternatives to antibodies as biorecognition elements mainly synthesized by systematic evolution of ligands by exponential enrichment and have predictable secondary structures. They have comparable affinity and specificity for binding to their target to antibody recognition. Since 2015, there have been about 2000 journal articles published in the field of aptamer biosensors, of which 30 articles were on the detection of P. aeruginosa. Here, we have focused on outlining the recent progress in the field of aptamer-based biosensors for P. aeruginosa detection based on optical, electrochemical, and piezoelectric signal transduction methods.

Aptamers: A prospective tool for infectious diseases diagnosis

It is well known that people's health is seriously threatened by various pathogens (such as Mycobacterium tuberculosis, Treponema pallidum, Novel coronavirus, HIV, Mucor, etc.), which leads to heavy socioeconomic burdens. Therefore, early and accurate pathogen diagnosis is essential for timely and effective therapies. Up to now, diagnosing human contagious diseases at molecule and nano levels is remarkably difficult owing to insufficient valid probes when it comes to determining the biological markers of pathogens. Aptamers are a set of high‐specificity and high‐sensitivity plastic oligonucleotides screened in vitro via the selective expansion of ligands by exponential enrichment (SELEX). With the advent of aptamer‐based technologies, their merits have aroused mounting academic interest. In recent years, as new detection and treatment tools, nucleic acid aptamers have been extensively utilized in the field of biomedicine, such as pathogen detection, new drug development, clinical diagnosis, nanotechnology, etc. However, the traditional SELEX method is cumbersome and has a long screening cycle, and it takes several months to screen out aptamers with high specificity. With the persistent development of SELEX‐based aptamer screening technologies, the application scenarios of aptamers have become more and more extensive. The present research briefly reviews the research progress of nucleic acid aptamers in the field of biomedicine, especially in the diagnosis of contagious diseases.

Improving the sensitivity of lateral flow immunoassay for Salmonella typhimurium detection via flow-rate regulation

Application of the traditional immunochromatographic assay (ICGA) has been limited by its poor sensitivity. The objective of this study was to increase the sensitivity of the traditional ICGA. A dual-mode ICGA (D-M ICGA) was developed by combining a nanozyme-assisted signal-amplification strategy with a magnetic-nanoparticle-based flow-speed-control strategy. Salmonella typhimurium can be detected simultaneously based on color and magnetic signals in the detection area of the D-M ICGA strip. The calculated limits of detection of 50 cfu·mL^-1 and 75 cfu·mL^-1 in the color and magnetic modes, respectively, were approximately 1000 times lower than those of the traditional ICGA. The selectivity and practical applicability of the D-M ICGA were also confirmed in this study. The results prove that the D-M ICGA is an assay that could be used for Salmonella typhimurium detection and can be easily adapted to detect other pathogenic bacteria.

Aptasensors for the detection of infectious pathogens: design strategies and point-of-care testing

The epidemic of infectious diseases caused by contagious pathogens is a life-threatening hazard to the entire human population worldwide. A timely and accurate diagnosis is the critical link in the fight against infectious diseases. Aptamer-based biosensors, the so-called aptasensors, employ nucleic acid aptamers as bio-receptors for the recognition of target pathogens of interest. This review focuses on the design strategies as well as state-of-the-art technologies of aptasensor-based diagnostics for infectious pathogens (mainly bacteria and viruses), covering the utilization of three major signal transducers, the employment of aptamers as recognition moieties, the construction of versatile biosensing platforms (mostly micro and nanomaterial-based), innovated reporting mechanisms, and signal enhancement approaches. Advanced point-of-care testing (POCT) for infectious disease diagnostics are also discussed highlighting some representative ready-to-use devices to address the urgent needs of currently prevalent coronavirus disease 2019 (COVID-19). Pressing issues in aptamer-based technology and some future perspectives of aptasensors are provided for the implementation of aptasensor-based diagnostics into practical application.

Novel Biorecognition Elements against Pathogens in the Design of State-of-the-Art Diagnostics

Infectious agents, especially bacteria and viruses, account for a vast number of hospitalisations and mortality worldwide. Providing effective and timely diagnostics for the multiplicity of infectious diseases is challenging. Conventional diagnostic solutions, although technologically advanced, are highly complex and often inaccessible in resource-limited settings. An alternative strategy involves convenient rapid diagnostics which can be easily administered at the point-of-care (POC) and at low cost without sacrificing reliability. Biosensors and other rapid POC diagnostic tools which require biorecognition elements to precisely identify the causative pathogen are being developed. The effectiveness of these devices is highly dependent on their biorecognition capabilities. Naturally occurring biorecognition elements include antibodies, bacteriophages and enzymes. Recently, modified molecules such as DNAzymes, peptide nucleic acids and molecules which suffer a selective screening like aptamers and peptides are gaining interest for their biorecognition capabilities and other advantages over purely natural ones, such as robustness and lower production costs. Antimicrobials with a broad-spectrum activity against pathogens, such as antibiotics, are also used in dual diagnostic and therapeutic strategies. Other successful pathogen identification strategies use chemical ligands, molecularly imprinted polymers and Clustered Regularly Interspaced Short Palindromic Repeats-associated nuclease. Herein, the latest developments regarding biorecognition elements and strategies to use them in the design of new biosensors for pathogens detection are reviewed.

Oligonucleotide aptamers for pathogen detection and infectious disease control

During an epidemic or pandemic, the primary task is to rapidly develop precise diagnostic approaches and effective therapeutics. Oligonucleotide aptamer-based pathogen detection assays and control therapeutics are promising, as aptamers that specifically recognize and block pathogens can be quickly developed and produced through simple chemical synthesis. This work reviews common aptamer-based diagnostic techniques for communicable diseases and summarizes currently available aptamers that target various pathogens, including the SARS-CoV-2 virus. Moreover, this review discusses how oligonucleotide aptamers might be leveraged to control pathogen propagation and improve host immune system responses. This review offers a comprehensive data source to the further develop aptamer-based diagnostics and therapeutics specific for infectious diseases.

Rapid detection of Pseudomonas aeruginosa using a DNAzyme-based sensor

In the present study, a DNAzyme was screened in vitro through the use of a DNA library and crude extracellular mixture (CEM) of Pseudomonas aeruginosa. Following eight rounds of selection, a DNAzyme termed PAE-1 was obtained, which displayed high rates of cleavage with strong specificity. A fluorescent biosensor was designed for the detection of P. aeruginosa in combination with the DNAzyme. A detection limit as low as 1.2 cfu/ml was observed. Using proteases and filtration, it was determined that the target was a protein with a molecular weight of 10 kDa-50 kDa. The DNAzyme was combined with a polystyrene board to construct a simple indicator plate sensor which produced a color that identified the target within 10 min. The results were reliable when tap water and food samples were tested. The present study provides a novel experimental strategy for the development of sensors based on a DNAzyme to rapidly detect P. aeruginosa in the field.

Aptamers and Aptamer-Coupled Biosensors to Detect Water-Borne Pathogens

Aptamers can serve as efficient bioreceptors for the development of biosensing detection platforms. Aptamers are short DNA or RNA oligonucleotides that fold into specific structures, which enable them to selectively bind to target analytes. The method used to identify aptamers is Systematic Evolution of Ligands through Exponential Enrichment (SELEX). Target properties can have an impact on aptamer efficiencies. Therefore, characteristics of water-borne microbial targets must be carefully considered during SELEX for optimal aptamer development. Several aptamers have been described for key water-borne pathogens. Here, we provide an exhaustive overview of these aptamers and discuss important microbial aspects to consider when developing such aptamers.

Recent advances on aptamer-based biosensors for detection of pathogenic bacteria

As a significant constituent in biosphere, bacteria have a great influence on human activity. The detection of pathogen bacteria is closely related to the human health. However, the traditional methods for detection of pathogenic bacteria are time-consuming and difficult for quantification, although they are practical and reliable. Therefore, novel strategies for rapid, sensitive, and cost-effective detection are in great demand. Aptamer is a kind of oligonucleotide that selected by repeated screening in vitro or systematic evolution of ligands by exponential enrichment (SELEX) technology. Over the past years, owing to high affinity and specificity of aptamers, a variety of aptamer-based biosensors have been designed and applied for pathogen detection. In this review, we have discussed the recent advances on the applications of aptamer-based biosensors in detection of pathogenic bacteria. In addition, we also point out some problems in current methods and look forward to the further development of aptamer-based biosensors for pathogen detection.

Recent Advances in Aptamer-Based Biosensors for Detection of Pseudomonas aeruginosa

Increasing concerns about nosocomial infection, food and environmental safety have prompted the development of rapid, accurate, specific and ultrasensitive methods for the early detection of critical pathogens. Pseudomonas aeruginosa is one of the most common pathogens that cause infection. It is ubiquitous in nature, being found in water, soil, and food, and poses a great threat to public health. The conventional detection technologies are either time consuming or readily produce false positive/negative results, which makes them unsuitable for early diagnosis and spot detection of P. aeruginosa. To circumvent these drawbacks, many efforts have been made to develop biosensors using aptamers as bio-recognition elements. Various aptamer-based biosensors for clinical diagnostics, food, and environmental monitoring of P. aeruginosa have been developed in recent years. In this review, we focus on the latest advances in aptamer-based biosensors for detection of P. aeruginosa. Representative biosensors are outlined according to their sensing mechanisms, which include optical, electrochemical and other signal transduction methods. Possible future trends in aptamer biosensors for pathogen detection are also outlined.

Electrochemical Immuno- and Aptamer-Based Assays for Bacteria: Pros and Cons over Traditional Detection Schemes

Microbiological safety of the human environment and health needs advanced monitoring tools both for the specific detection of bacteria in complex biological matrices, often in the presence of excessive amounts of other bacterial species, and for bacteria quantification at a single cell level. Here, we discuss the existing electrochemical approaches for bacterial analysis that are based on the biospecific recognition of whole bacterial cells. Perspectives of such assays applications as emergency-use biosensors for quick analysis of trace levels of bacteria by minimally trained personnel are argued.

Hollow carbon nanocapsules-based nitrogen-doped carbon nanofibers with rosary-like structure as a high surface substrate for impedimetric detection of Pseudomonas aeruginosa

The design of hollow mesoporous carbon-based materials has attracted tremendous attention, due to their sizeable intrinsic cavity to load specific chemical and unique physical/chemical properties in various applications. Herein, we have established an effective strategy for the preparation of novel hollow carbon nanocapsules-based nitrogen-doped carbon nanofibers (CNCNF) with rosary-like structure. By embedding ultrafine hollow carbon nanocapsules into electrospun polyacrylonitrile (PAN) skeleton, the as-designed composite CNFs were carbonized into hierarchical porous CNFs, consisted of interconnected nitrogen-doped hollow carbon nanocapsules. Due to its individual structural properties and unique chemical composition, the performance of CNCNF was evaluated in aptasensor application via the detection of Pseudomonas aeruginosa (PA). Under optimized conditions, the aptasensor based on CNCNF has a detection limit of 1 CFU⋅mL^-1 and a linear range from 10¹ CFU ⋅mL^-1 to 10⁷ CFU ⋅mL^-1 (n = 3). Moreover, the designed aptasensor possesses high sensivity, high selectivity, low detection limit, and high reproducibility. These studies showed that the CNCNF material offers a wide variety of enhanced electrochemical features as an electrode material for aptasensor application.

Recent Progress in the Identification of Aptamers Against Bacterial Origins and Their Diagnostic Applications

Aptamers have gained an increasing role as the molecular recognition element (MRE) in diagnostic assay development, since their first conception thirty years ago. The process to screen for nucleic acid-based binding elements (aptamers) was first described in 1990 by the Gold Laboratory. In the last three decades, many aptamers have been identified for a wide array of targets. In particular, the number of reports on investigating single-stranded DNA (ssDNA) aptamer applications in biosensing and diagnostic platforms have increased significantly in recent years. This review article summarizes the recent (2015 to 2020) progress of ssDNA aptamer research on bacteria, proteins, and lipids of bacterial origins that have implications for human infections. The basic process of aptamer selection, the principles of aptamer-based biosensors, and future perspectives will also be discussed.

A fluorometric assay for rapid enrichment and determination of bacteria by using zirconium-metal organic frameworks as both capture surface and signal amplification tag

A fluorometric assay was introduced to determine Acinetobacter baumannii (A. baumannii) in blood samples by utilizing Zr-MOFs both as functional coating for magnetic Fe₃O₄ nanoparticles to provide modification surface (Zr-mMOF) and as fluorescein carrier to produce fluorescence signals (F@UIO-66-NH₂). Through strong Zr-O-P bonding, two distinct terminal phosphate-labeled A. baumannii and lipopolysaccharide (LPS) specific aptamers were attached onto Zr-MOFs to fabricate the magnetic core-shell capture probe (denoted as Zr-mMOF-p-Ab-Apt) and signal probe (denoted as F@UIO-66-NH₂-p-LPS-Apt), respectively. After successive incubation with A. baumannii in blood samples and magnetic separation, the sandwich-type composite of capture probe/A. baumannii cells/signal probe was treated with high concentration of anionic phosphate ions to destroy the nano-structure of UIO-66-NH₂ in the signal probe and fast release of fluorescein to produce amplified fluorescence signals. Due to the high aptamer modification efficiency of Zr-mMOF-p-Ab-Apt (up to 93%) and its strong affinity to A. baumannii, the enrichment efficiency of this capture probe has reached to 96.7%. Further, due to the high fluorescein loading efficiency of UIO-66-NH₂ and our novel amplification strategy to destroy F@UIO-66-NH₂-p-LPS-Apt to release and amplify fluorescein signals at 512 nm in the presence of high concentration of anionic phosphate ions, the sensitivity of this method has reached 10 cfu mL^-1. This method allows enrichment and determination of A. baumannii within ~2.5 h. The limit of detection of A. baumannii in blood samples is 10 cfu mL^-1 with a linear range of 10¹-10⁵ cfu mL^-1. This indicates the potential of this assay for diagnosis of bloodstream infection in early stage. Graphical abstractSchematic representation of sandwich-type fluorometric assay for Acinetobacter baumannii in blood samples with the capture probe (Zr-mMOF-p-Ab-Apt) and signal probe (F@UIO-66-NH2-p-LPS-Apt). The limit of detection is down to 10 cfu mL^-1 with a linear range of 10¹-10⁵ cfu mL^-1.

Advances in Using Nanotechnology Structuring Approaches for Improving Food Packaging

Recent advances in food packaging materials largely rely on nanotechnology structuring. Owing to several unique properties of nanostructures that are lacking in their bulk forms, the incorporation of nanostructures into packaging materials has greatly improved the performance and enriched the functionalities of these materials. This review focuses on the functions and applications of widely studied nanostructures for developing novel food packaging materials. Nanostructures that offer antimicrobial activity, enhance mechanical and barrier properties, and monitor food product freshness are discussed and compared. Furthermore, the safety and potential toxicity of nanostructures in food products are evaluated by summarizing the migration activity of nanostructures to different food systems and discussing the metabolism of nanostructures at the cellular level and in animal models.

Dual-aptamers labeled polydopamine-polyethyleneimine copolymer dots assisted engineering a fluorescence biosensor for sensitive detection of Pseudomonas aeruginosa in food samples

To ensure the food security and protect public health, development of rapid and reliable approaches to detecting foodborne pathogens is of great significance. In this study, polydopamine-polyethyleneimine (PDA-PEI) copolymer dots are prepared via the self-polymerization of dopamine and cross-linking with branched PEI at room temperature. The PDA-PEI copolymer dots are very stable against photobleaching, extreme pH, as well as high ionic strength. They are used as a fluorescent probe to fabricate a biosensor for rapid and sensitive detection and quantification of Pseudomonas aeruginosa (P. aeruginosa). In the biosensor, dual-aptamers of P. aeruginosa are used to label PDA-PEI copolymer dots. Compared to single aptamer labeled PDA-PEI dots, the dual-aptamers labeled PDA-PEI dots endow the biosensor with enhanced sensitivity for target pathogen. The fluorescence biosensor demonstrates a wide linear response to P. aeruginosa in the concentration range of 10¹-10⁷ cfu mL^-1 with acceptable selectivity. The limit of detection is calculated to be 1 cfu mL^-1. The whole detection process can be finished in 1.5 h. The feasibility of the fabricated biosensor is verified by successful determination of P. aeruginosa in skim milk, orange juice, and popsicle samples. The biosensor provides an alternative and attractive platform for rapid and sensitive detection of bacteria in food products.

Detection of pathogenic bacteria via nanomaterials-modified aptasensors

Detection and identification of special cells via aptamer-based nano-conjugates sensors have been revolutionized over the past few years. These sensing platforms rely on selecting aptamers using systematic evolution of ligands by exponential enrichment (SELEX) in vitro, which allows for sensitive detection of cells. Integration of the aptamer-based sensors (aptasensors) with nanomaterials offers enhanced specificity and sensitivity, which in turn, offers great promise for numerous applications, spanning from bioanalysis to biomedical applications. Accordingly, the demand for using aptamer-conjugated nanomaterials for various applications has progressively increased over the past years. In light of this, this Review seeks to highlight the recent advances in the development of aptamer-conjugated nanomaterials and their utilization for the detection of various pathogens involved in infectious diseases and food contamination.

Impedimetric aptasensor for Pseudomonas aeruginosa by using a glassy carbon electrode modified with silver nanoparticles

An aptasensor is described for the ultrasensitive detection of Pseudomonas aeruginosa (P. aeruginosa). A glassy carbon electrode (GCE) was first modified by electrodeposition of silver nanoparticles (AgNPs). Immobilization of NH₂-aptamer was covalently attached to the AgNP/GCE surface. The morphology, distribution and size of the sensor were characterized by field emission scanning electron microscopy. Cyclic voltammetry and electrical impedance spectroscopy were used to study conductivity of the aptasensor and the electrochemical properties. Detection of P. aeruginosa was carried out by evaluation of the charge transfer resistance after and before the adding of P.aeruginosa and by using the hexacyanoferrate redox system as an electrochemical probe. The impedance increases on going from 10² to 10⁷ CFU·mL^-1 concentrations of P. aeruginosa, and the detection limit is 33 CFU·mL^-1 (for S/N = 3). The assay was successfully applied for the determination of P. aeruginosa in spiker serum samples. Graphical abstract Schematic representation of an impedimetric assay for Pseudomonas aeruginosa by using a [Fe(CN)₆]^3-/4- probe based on immobilization of amino-modified aptamer onto a glassy carbon electrode (GCE) modified with silver nanoparticles (AgNPs): Incubation with P. aeruginosa leads to an increase of the charge-transfer resistance.

An electrochemical sensing platform based on ladder-shaped DNA structure and label-free aptamer for ultrasensitive detection of ampicillin

Herein, an electrochemical aptasensor is described for detection of ampicillin (Ampi). The sensing strategy is based on the application of a ladder-shaped DNA structure as a multi-layer physical block on the surface of gold electrode. Attributing to the electrostatic repulsion and physical prevention of the ladder-shaped DNA structure, ultrasensitive detection of Ampi was achieved with a detection limit as low as 1 pM. In the presence of Ampi, the ladder-shaped DNA structure is disassembled and detached from the electrode surface. This leads to the high access of [Fe(CN)₆]^3-/4- as a redox indicator to the electrode surface and a strong redox peak. The aptasensor response for Ampi detection was in the linear range from 7 pM to 100 nM with the detection limit of 1 pM. The presented analytical strategy showed its application in detecting Ampi in the spiked milk samples with satisfactory performance. This work can be easily expanded for different targets by alternating the corresponding aptamers.

Nanomaterial-based optical and electrochemical techniques for detection of methicillin-resistant Staphylococcus aureus: a review

Methicillin-resistant Staphylococcus aureus (MRSA) is responsible for a number of life-threatening complications in humans. Mutations in the genetic sequence of S. aureus due to the presence of certain genes results in resistance against β-lactamases. Thus, there is an urgent need for developing highly sensitive techniques for the early detection of MRSA to counter the rise in resistant strains. This review (142 refs.) extensively covers literature reports on nanomaterial-based optical and electrochemical sensors from the year 1983 to date, with particularly emphasis on recent advances in electrochemical sensing (such as voltammetry and impedimetric) and optical sensing (such as colorimetry and fluorometry) techniques. Among the electrochemical methods, various nanomaterials were employed for the modification of electrodes. Whereas, in optical assays, formats such as enzyme linked immunosorbent assay, lateral flow assays or in optical fiber systems are common. In addition, novel sensing platforms are reported by applying advanced nanomaterials which include gold nanoparticles, nanotitania, graphene, graphene-oxide, cadmium telluride and related quantum dots, nanocomposites, upconversion nanoparticles and bacteriophages. Finally, closing remarks and an outlook conclude the review. Graphical abstract Schematic of the diversity of nanomaterial-based methods for detection of methicillin-resistant Staphylococcus aureus (MRSA). AuNPs: gold nanoparticles; QDs: quantum dots; PVL: Panton-Valentine leukocidin; mecA gene: mec-gene complex encoding methicillin resistance.

A bimodal (SERS and colorimetric) aptasensor for the detection of Pseudomonas aeruginosa

An aptamer based assay is described for the determination of Pseudomonas aeruginosa (P. aeruginosa). It is bimodal in that both surface enhanced Raman spectroscopy (SERS) and colorimetry are applied for quantitation. The aptamer against P. aeruginosa and its corresponding complementary DNA fragment (cDNA) were conjugated to two kinds of differently sized gold nanoparticles (AuNPs). The 30 nm AuNPs carrying the aptamer are used as color signal probes, while the cDNA-15 nm AuNP conjugates serve as SERS signalling probes. In the absence of P. aeruginosa, the two probes assemble to form the duplex structure. When the probes are exposed to P. aeruginosa, the aptamer dissociates from its cDNA and binds the target. After centrifugation, the SERS signal from the supernatant decreased, due to the decreased electromagnetic effect. On addition of 3,3',5,5'-tetramethylbenzidine (TMB) and hydrogen peroxide, a relatively rapid catalytic reaction between horseradish peroxidase (linked to the aptamer on the 30-nm AuNPs) and TMB occurred, resulting in the formation of a green color with an absorption peak at 640 nm. The reliability of the approach was validated by detecting different levels of P. aeruginosa in spiked tap water and chicken meat samples. The average recoveries ranged from 88% to 112%, confirming the practicality of this method. In our perception, this dual mode aptasensor paves the way for accurate and reliable determination of P. aeruginosa. Conceivably, the method has a wide scope in that it may be extended to the determination of various other species for which respective aptamers are available. Graphical abstract Schematic illustration of a bimodal aptasensor based on surface enhanced Raman scattering (SERS) and color change for the detection of Pseudomonas aeruginosa.