Electrochemical sensor for L-cysteine by using a cobalt(II)/aluminum(III) layered double hydroxide as a nanocatalyst

Fabrication of dual layered double hydroxide/cobalt oxide sorbent on pencil graphite for solid-phase microextraction and HPLC analysis of environmental pollutants

This study describes the synthesis of Co/Al-LDH through an electrochemical method on a pencil graphite substrate, followed by the partial conversion of Co/Al-LDH to Co3O4 via a calcination method on the same substrate. The obtained sorbent served as an extraction phase for the direct solid-phase microextraction (SPME) of environmental pollutants, including chlorophenols and aromatic hydrocarbons, from wastewater samples. The extracted analytes were quantified using high-performance liquid chromatography-ultraviolet detection (HPLC-UV). Under optimal conditions, the linear dynamic range (LDR) extended for each extracted analyte over a concentration range of 1-500 μg L-1. The coefficients of determination (R2) for the target analytes ranged from 0.9946 to 0.9987. The limits of detection (LODs) were in the range of 0.29-0.69 μg L-1, while the limits of quantification (LOQs) ranged from 0.96-2.1 μg L-1. Moreover, spike recovery (SR) for real samples ranged from 90.0 to 113.0 %, indicating the effectiveness of the proposed method. The developed coating showed excellent efficiency and sensitivity for the extraction of chlorophenols and aromatic hydrocarbons from real samples. This work is novel in that it enables the simultaneous extraction of analytes with different polarities using two types of sorbents on the same substrate.

Electrocatalytic efficiency of carbon nitride supported gold nanoparticle based sensor for iodide and cysteine detection

Extensive investigations are being conducted on gold nanoparticles focusing on their applications in biosensors, laser phototherapy, targeted drug delivery and bioimaging utilizing advanced detection techniques. In this work, an electrochemical sensor was developed based on graphite carbon nitride supported gold nanoparticles. Carbon nitride supported gold nanoparticles (Au-CN) was synthesized by applying a deposition-precipitation route followed by a chemical reduction technique. The composite system was characterized by X-ray diffraction and X-ray photo electron spectroscopy methods. Electron microscopy analysis confirmed the formation of gold nanoparticles within the size range of 5-15 nm on the carbon nitride support. Carbon nitride supported gold based sensor was employed for the electrochemical detection of iodide ion and l-cysteine. The limit of detection and sensitivity of the sensor was attained 8.9 μM and 0.96 μAμM⁻1cm⁻2, respectively, for iodide ion, while 0.48 μM and 5.8 μAμM⁻1cm⁻2, respectively, was achieved for the recognition of cysteine. Furthermore, a paper-based electrochemical device was developed using the Au-CN hybrid system that exhibited promising results in detecting iodide ions, highlighting its potential for economic and portable device applications.

LDH-Based Voltammetric Sensors

Layered double hydroxides (LDHs), also named hydrotalcite-like compounds, are anionic clays with a lamellar structure which have been extensively used in the last two decades as electrode modifiers for the design of electrochemical sensors. These materials can be classified into LDHs containing or not containing redox-active centers. In the former case, a transition metal cation undergoing a reversible redox reaction within a proper potential window is present in the layers, and, therefore, it can act as electron transfer mediator, and electrocatalyze the oxidation of an analyte for which the required overpotential is too high. In the latter case, a negatively charged species acting as a redox mediator can be introduced into the interlayer spaces after exchanging the anion coming from the synthesis, and, again, the material can display electrocatalytic properties. Alternatively, due to the large specific surface area of LDHs, molecules with electroactivity can be adsorbed on their surface. In this review, the most significant electroanalytical applications of LDHs as electrode modifiers for the development of voltammetric sensors are presented, grouping them based on the two types of materials.

Recent Advances in Electrochemical Sensors for Sulfur-Containing Antioxidants

Sulfur-containing antioxidants are an important part of the antioxidant defense systems in living organisms under the frame of a thiol-disulfide equilibrium. Among them, l-cysteine, l-homocysteine, l-methionine, glutathione, and α-lipoic acid are the most typical representatives. Their actions in living systems are briefly discussed. Being electroactive, sulfur-containing antioxidants are interesting analytes to be determined using various types of electrochemical sensors. Attention is paid to the chemically modified electrodes with various nanostructured coverages. The analytical capabilities of electrochemical sensors for sulfur-containing antioxidant quantification are summarized and discussed. The data are summarized and presented on the basis of the electrode surface modifier applied, i.e., carbon nanomaterials, metal and metal oxide nanoparticles (NPs) and nanostructures, organic mediators, polymeric coverage, and mixed modifiers. The combination of various types of nanomaterials provides a wider linear dynamic range, lower limits of detection, and higher selectivity in comparison to bare electrodes and sensors based on the one type of surface modifier. The perspective of the combination of chromatography with electrochemical detection providing the possibility for simultaneous determination of sulfur-containing antioxidants in a complex matrix has also been discussed.

Nanomaterial-based electrochemical sensors for detection of amino acids

Amino acids are the building blocks of proteins and muscle tissue. They also play a significant role in physiological processes related to energy, recovery, mood, muscle and brain function, fat burning and stimulating growth hormone or insulin secretion. Accurate determination of amino acids in biological fluids is necessary because any changes in their normal ranges in the body warn diseases like kidney disease, liver disease, type 2 diabetes and cancer. To date, many methods such as liquid chromatography, fluorescence mass spectrometry, etc. have been used for the determination of amino acids. Compared with the above techniques, electrochemical systems using modified electrodes offer a rapid, accurate, cheap, real-time analytical path through simple operations with high selectivity and sensitivity. Nanomaterials have found many interests to create smart electrochemical sensors in different application fields e.g. biomedical, environmental, and food analysis because of their exceptional properties. This review summarizes recent advances in the development of nanomaterial-based electrochemical sensors in 2017-2022 for the detection of amino acids in various matrices such as serum, urine, blood and pharmaceuticals.

Highly sensitive electrochemical sensor based on carbon paste electrode modified with graphene nanoribbon-CoFe2O4@NiO and ionic liquid for azithromycin antibiotic monitoring in biological and pharmaceutical samples

In this report, Azithromycin (Azi) antibiotic was measured by carbon paste electrode (CPE) improved by graphene nanoribbon-CoFe2O4@NiO nanocomposite and 1-hexyl-3 methylimidazolium hexafluorophosphate (HMIM PF6) as an ionic liquid binder. The electrochemical behavior of Azi on the graphene nanoribbon-CoFe2O4@NiO/HMIM PF6/CPE is investigated by voltammetric methods, and the results showed that the modifiers improve the conductivity and electrochemical activity of the CPE. According to obtained data, the electrochemical behavior of Azi is related to pH. under optimum conditions, the sensor has linear ranges from 10 µM to 2 mM with a LOD of 0.66 µM. The effect of scan rate and chronoamperometry were studied, which showed that the Azi electro-oxidation is diffusion controlled with the diffusion coefficient of 9.22 × 10-6 cm2/s. The reproducibility (3.15%), repeatability (2.5%), selectivity, and stability (for 30 days) tests were investigated, which results were acceptable. The actual sample analysis confirmed that the proposed sensor is an appropriate electrochemical tool for Azi determination in urine and Azi capsule.

Advances in layered double hydroxide based labels for signal amplification in ultrasensitive electrochemical and optical affinity biosensors of glucose

Since the development of enzyme electrodes, the research area of glucose biosensing has seen outstanding progress and improvement. Numerous sensing platforms have been developed based on different immobilization techniques and improved electron transfer between the enzyme and electrode. Interestingly, these platforms have consistently used innovative nanostructures and nanocomposites. In recent years, layered double hydroxides (LDHs) have become key tools in the field of analytical chemistry owing to their outstanding features and benefits, such as facile synthesis, cost-effectiveness, substantial surface area, excellent catalytic performance, and biocompatibility. LDHs are often synthesized as nanomaterial composites or manufactured with specific three-dimensional structures. The purpose of this review is to illustrate the biosensing prospects of LDH-based glucose sensors and the need for improvement. First, various clinical and conventional approaches for glucose determination are discussed. The definitions, types, and various synthetic methodologies of LDHs are then explained. Subsequently, we discuss the various research studies regarding LDH-based electrochemical and optical assays, focusing on modified systems, improved electron transfers pathways (through developments in surface science), and different sensing designs based on nanomaterials. Finally, a summary of the current limitations and future challenges in glucose analysis is described, which may facilitate further development and applications.

Recent trends in layered double hydroxides based electrochemical and optical (bio)sensors for screening of emerging pharmaceutical compounds

The rapid expansion of the human population has given rise to new environmental and biomedical concerns, contributing to different advancements in the pharmaceutical industry. In the field of analytical chemistry over the last few years, layered double hydroxides (LDHs) have drawn significant attention, owing to their extraordinary properties. Furthermore, the novel advancement of LDH-based optical and electrochemical platforms to detect different pharmaceutical materials has acquired substantial attention because of their outstanding specificity, actual-time controlling, and user-friendliness. This review aims to recapitulate advanced LDHs-based optical and electrochemical sensors and biosensors to identify and measure important pharmaceutical compounds, such as anti-depressant, anti-inflammatory, anti-viral, anti-bacterial, anti-cancer, and anti-fungal drugs. Additionally, fundamental parameters, namely interactions between sensor and analyte, design rationale, classification, selectivity, and specificity are considered. Finally, the development of high-efficiency techniques for optical and electrochemical sensors and biosensors is featured to deliver scientists and readers a complete toolbox to identify a broad scope of pharmaceutical substances. Our goals are: (i) to elucidate the characteristics and capabilities of available LDHs for the identification of pharmaceutical compounds; and (ii) to deliver instances of the feasible opportunities that the existing devices have for the developed sensing of pharmaceuticals regarding the protection of ecosystems and human health at the global level.

A novel l-cysteine sensor using in-situ electropolymerization of l-cysteine: Potential to simple and selective detection

This work presents an all-in-one origami paper-based electrochemical platform for simple and inexpensive l-cysteine (Cys) detection using Cys as a monomer for modifying electrode surfaces. The proposed method combines the steps of electropolymerization and detection into a single device to offer a highly convenient method for the end-user. In comparison, the sensitivity toward Cys detection is a significantly increased using this modified electrode. The developed device provided a linear concentration range of 10-800 μM with a limit of detection of 5.5 μM. For application, the device was successfully applied to detect Cys in different food products such as wheat flour, bread, and cake with satisfactory results, yielding excellent intra-day and inter-day relative standard deviations (1.5-4.9%) and recoveries (84.2-110.8%). This discovery is important from the viewpoint of the development of Cys detection in other applications in the future.

Novel CNT Supported Molybdenum Catalyst for Detection of L-Cysteine in Its Natural Environment

In this study, novel carbon nanotube-supported Mo (Mo/CNT) catalysts were prepared with the sodium borohydride reduction method for the detection of L-cysteine (L-Cys, L-C). Mo/CNT catalysts were characterized with scanning electron microscopy with elemental dispersion X-ray (EDX-SEM), X-ray diffraction (XRD), UV-vis diffuse reflectance spectrometry (UV-vis), temperature-programmed reduction (TPR), temperature programmed oxidation (TPO), and temperature-programmed desorption (TPD) techniques. The results of these advanced surface characterization techniques revealed that the catalysts were prepared successfully. Electrochemical measurements were employed to construct a voltammetric L-C sensor based on Mo/CNT catalyst by voltammetric techniques such as cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Further measurements were carried out with electrochemical impedance spectroscopy (EIS). Mo/CNT/GCE exhibited excellent performance for L-C detection with a linear response in the range of 0–150 µM, with a current sensitivity of 200 mA/μM cm2 (0.0142 μA/μM), the lowest detection limit of 0.25 μM, and signal-to-noise ratio (S/N = 3). Interference studies showed that the Mo/CNT/GCE electrode was not affected by D-glucose, uric acid, L-tyrosine, and L-trytophane, commonly interfering organic structures. Natural sample analysis was also accomplished with acetyl L-C. Mo/CNT catalyst is a promising material as a sensor for L-C detection.

Electrochemical Amino Acid Sensing: A Review on Challenges and Achievements

The rapid growth of research in electrochemistry in the last decade has resulted in a significant advancement in exploiting electrochemical strategies for assessing biological substances. Among these, amino acids are of utmost interest due to their key role in human health. Indeed, an unbalanced amino acid level is the origin of several metabolic and genetic diseases, which has led to a great need for effective and reliable evaluation methods. This review is an effort to summarize and present both challenges and achievements in electrochemical amino acid sensing from the last decade (from 2010 onwards) to show where limitations and advantages stem from. In this review, we place special emphasis on five well-known electroactive amino acids, namely cysteine, tyrosine, tryptophan, methionine and histidine. The recent research and achievements in this area and significant performance metrics of the proposed electrochemical sensors, including the limit of detection, sensitivity, stability, linear dynamic range(s) and applicability in real sample analysis, are summarized and presented in separate sections. More than 400 recent scientific studies were included in this review to portray a rich set of ideas and exemplify the capabilities of the electrochemical strategies to detect these essential biomolecules at trace and even ultra-trace levels. Finally, we discuss, in the last section, the remaining issues and the opportunities to push the boundaries of our knowledge in amino acid electrochemistry even further.

Nitrogen and Sulfur Co-Doped Graphene as Efficient Electrode Material for L-Cysteine Detection

Two graphene samples co-doped with nitrogen and sulfur were synthesized by the hydrothermal method using thiourea as doping and reducing agent for graphene oxide (GO). An appropriate amount of thiourea was added to the aqueous dispersion of GO, previously sonicated for 30 min. The mixture was poured into an autoclave and placed in the oven for 3 h, at 120 and 200 °C. The samples were denoted NSGr-120 and NSGr-200, respectively, in agreement with the reaction temperatures. They were next morphologically and structurally characterized by advanced techniques, such as SEM/TEM, XPS, XRD, and FTIR. According to XPS analysis, the NSGr-120 sample has higher amounts of heteroatoms in comparison with NSGr-200, indicating that the reaction temperature is a crucial factor that affects the doping degree. In order to reveal the influence of the doping degree on the electrochemical performances of graphene-modified electrodes, they were tested in solutions containing L-cysteine molecules. The electrode with the best electrocatalytic performances, GC/NSGr-120, was tested to detect L-cysteine in a pharmaceutical drug, proving its applicability in real sample analysis.

Which is Better for Nanomedicines: Nanocatalysts or Single-Atom Catalysts?

With the rapid advancements in nanotechnology and materials science, numerous nanomaterials have been used as catalysts for nanomedical applications. Their design and modification according to the microenvironment of diseases have been shown to achieve effective treatment. Chemists are in pursuit of nanocatalysts that are more efficient, controllable, and less toxic by developing innovative synthetic technologies and improving existing ones. Recently, single-atom catalysts (SACs) with excellent catalytic activity and high selectivity have attracted increasing attention because of their accurate design as nanomaterials at the atomic level, thereby highlighting their potential for nanomedical applications. In this review, the recent advances in nanocatalysts and SACs are briefly summarized according to their synthesis, characterizations, catalytic mechanisms, and nanomedical applications. The opportunities and future scope for their development and the issues and challenges for their application as nanomedicine are also discussed. As far as it is known, the review is the systematic comparison of nanocatalysts and SACs, especially in the field of nanomedicine, which has promoted the development of nanocatalytic medicine.

Surface-functionalized layered double hydroxide nanocontainers as bile acid sequestrants for lowering hyperlipidemia

The surface modification of two-dimensional (2D) nanocontainers with versatile chemical functionalities offers enormous advantages in medicine owing to their altered physicochemical properties. In this study, we demonstrate the fabrication of surface-functionalized layered double hydroxides (LDHs) towards their use as effective intestinal bile acid sequestrants. To demonstrate these aspects, the LDHs are initially modified with an amino silane, N¹-(3-trimethoxysilylpropyl) diethylenetriamine (LDHs-N3),which, on the one hand, subsequently used for the fabrication of the dendrimer by repetitive immobilization of ethylene diamine using methyl acrylate as a spacer. On the other hand, these surface-functionalized LDHs are wrapped with an anionic enteric co-polymer to not only prevent the degradation but also increase the stability of these 2D nanoplates in an acidic environment of the stomach to explore the in vivo efficacy. In vitro cholic acid adsorption results showed that these surface-functionalized LDHs displayed tremendous adsorption ability of bile salt. Consequently, the bile salt adsorption results in vivo in mice confirmed that the enteric polymer-coated diethylenetriamine silane-modified LDHs, resulting in the reduced cholesterol by 8.2% in the high fat diet-fed mice compared to that of the oil treatment group with augmented 28% of cholesterol, which gained weight by 6.7% in 4 weeks. Notably, the relative organ (liver and kidney) weight analysis and the tissue section of histology results indicated that the modified LDHs showed high biocompatibility in vivo. Together, our findings validate that these surface-functionalized 2D nanoplates have great potential as effective intestinal bile acid sequestrants.

Recent advances in the application of layered double hydroxides in analytical chemistry: A review

In recent years, layered double hydroxides (LDHs) have garnered a lot of attention in analytical chemistry, due to their advantages such as relatively simple synthesis, low cost, possession of large specific surface area and high catalytic activity, and biocompatibility. The most common applications of LDH in analytical chemistry such as sorbents in sample extraction, electrode materials in electrochemical sensing and color indicators in colorimetric detection have been well reported. Generally, the LDHs are prepared as composites with nanomaterials, or constructed with specific three-dimensional structures, befitting the applications desired for them. However, the applications of LDHs (as extraction sorbents, color indicators and in electrochemical sensing) are usually limited in these scenarios. To help address these challenges, future trends and developmental prospects of LDHs materials in analytical chemistry are discussed in this article. Besides, the strategies associated with the design of LDHs, including the structural aspects, for potential analytical applications are presented and reviewed.