Efficiency of soft tissue incision with a novel 445-nm semiconductor laser

Antimicrobial effect of 2.5% sodium hypochlorite irradiated with the 445 Nm diode laser against bacterial biofilms in root canal - in vitro pilot study

AIMS

This research investigates the efficacy of a novel blue diode laser (445 nm wavelength) in enhancing the antimicrobial action of 2.5% sodium hypochlorite against biofilms of two prevalent microbial species found in root canals- in vitro. The research also includes a comparative analysis with a more established diode laser protocol (970 nm), assessing their respective effectiveness in eliminating root canal pathogens.

METHODOLOGY

62 extracted single-rooted human teeth were prepared with rotary endodontic instruments, sterilized, contaminated with a combination of two microbial cultures (E. faecalis, C. albicans) and incubated for 14 days at 37 ◦C. The samples were randomly distributed into 4 groups: G1- negative control, G2-2.5% NaOCl rinse, G3-445 nm laser boosted 2.5% NaOCl rinse, G4-970 nm laser boosted 2.5% NaOCl rinse. SEM imaging was done to visualize effects in each group. The number of viable microbes in each sample was determined by the colony forming unit count technique (CFU).

RESULTS

A statistically significant reduction of microbial numbers after all treatments was observed (Mann-Whitney U test, significance level set to 5%). G3 and G4 showed similar results, both better than G2.

CONCLUSIONS

The 445 nm diode laser NaOCl irradiation protocol has improved antimicrobial effectiveness when compared to sole 2.5% NaOCl rinse and equal effectiveness as the 970 nm NaOCl irradiation protocol, ex vivo.

National Trends in Laryngeal Laser Surgery: Comparison of Operative Versus Office-Based Procedures

OBJECTIVE

To analyze national trends in the prevalence of office-based laryngeal ablative procedures and compare those with traditional operative excisional procedures utilizing direct laryngoscopy.

METHODOLOGY

For years 2013-2022, the US Medicare Part B claims database was searched for Current Procedural Terminology (CPT) codes 31572 (flexible laryngoscopy with laser ablation of lesion), 31540 (operative direct laryngoscopy with excision of lesion), 31541 (operative direct microlaryngoscopy with excision of lesion), and 31545 (operative direct microlaryngoscopy with excision of lesion and local tissue flap reconstruction). For each CPT code, the total number of charges billed to the Medicare database in each calendar year was recorded and annual trends were analyzed. Biopsy procedures were not included.

RESULTS

The annual number of office-based laser procedures (CPT 31572) remained relatively constant since the CPT code was introduced in 2017 (range: 18887-25241 procedures annually, trendline slope = +16, R2:0.02). Office-based laser procedures comprised a small portion of total laryngeal excisional procedures (range: 8.4%-12.1%). The total number of operative laryngeal excisions, billed by CPT 31540 and 31541, declined over the studied time frame (Trendline slope = -132, R2:0.93; Trendline slope = -950, R2: 0.93 respectively).

CONCLUSIONS

Office-based laser procedures comprise a small fraction of procedures to remove laryngeal lesions. The number of office-based laser procedures has been relatively stable over the last 5 years. This finding contrasts with the prevailing health care trend toward office-based procedures. Further research is needed to understand the decrease in operative laryngeal lesion excision procedures observed over the last 10 years.

LEVEL OF EVIDENCE

4 Laryngoscope, 135:823-828, 2025.

Photoangiolytic Lasers for Treatment of Benign Laryngeal Lesions: A Systematic Review and Meta-Analysis

OBJECTIVES

To compare the efficacy of the 445-nm blue laser to the 585-nm pulsed dye laser (PDL) and 532-nm potassium-titanyl-phosphate (KTP) laser in the treatment of benign laryngeal lesions.

DATA SOURCES

Cochrane Library, PubMed, Scopus, and CINAHL.

REVIEW METHODS

Following PRISMA guidelines, databases were searched from inception through January 29, 2024, for studies reporting the use of photoangiolytic lasers for treatment of benign laryngeal lesions, including the 585-nm PDL, 532-nm KTP laser, and 445-nm blue laser. Outcome measures included lesion resolution (%), mean differences (Δ) in Voice Handicap Index (VHI-10), and summed dysphonia grade, roughness, and breathiness (GRB) scale.

RESULTS

A total of 45 studies were included for meta-analysis, consisting of 348 patients treated with PDL, 550 patients with KTP laser, and 338 patients with blue laser. Treatment with blue laser resulted in the greatest lesion resolution (94.0%; 95% confidence interval [CI]: 90.2%-96.7%), followed by KTP laser (90.4%; 95% CI: 84.1%-95.2%), and PDL (86.9%; 95% CI: 62.9%-99.2%). VHI-10 improved significantly in patients following treatment with blue laser (Δ13.3; 95% CI: 10.7-16.0; p < 0.0001), KTP laser (Δ10.3; 95% CI: 7.4-13.3; p < 0.0001), and PDL (Δ7.4; 95% CI: 4.8-10.1; p < 0.0001). GRB improved significantly in patients following treatment with blue laser (Δ4.1; 95% CI: 2.9-5.2; p < 0.0001), KTP laser (Δ3.0; 95% CI: 2.0-4.0; p < 0.0001), and PDL (Δ2.5; 95% CI: 0.8-4.2; p = 0.005).

CONCLUSIONS

Photoangiolytic lasers are effective in treating benign laryngeal lesions. Blue lasers are promising for laryngeal laser surgery. Laryngoscope, 134:4847-4857, 2024.

Blue light diode laser for treating benign maxillofacial vascular lesions: comparison of various techniques using the same diode laser

Maxillofacial benign vascular lesions may require removal for aesthetic purpose or bleeding. Lasers have been substituting traditional excision. Fifteen vascular lesions were treated with different Blue Diode Laser protocols: laser forced dehydration (LFD), intralesional coagulation (ILC), surgical excision. LFD is conservative, quick and does not need anesthesia. ILC was used as second choice and surgical excision when both techniques failed. One patient reported asymptomatic ulceration after LFD and one patient referred bleeding after ILC. None experienced pain or relapse. Lasers are useful for treating vascular benign lesions. Surgical excision should be left as utmost treatment especially in case of aesthetic concern.

Conventional vs. diode laser stapedotomy: audiological outcomes and clinical safety

PURPOSE

To compare the hearing results and clinical safety of patients undergoing stapes surgery with conventional technique and diode laser.

METHODS

Retrospective observational study, which included patients treated with primary stapes surgery performed between January 2009 and January 2020. Three audiometric measurements (PTA, GAP and SDS) were evaluated as main results, evaluated by analysis of covariance (controlling the preoperative value). Intraoperative and postoperative complications were also analyzed. Outcomes were measured 6 months (± 1 month) after surgery.

RESULTS

153 cases were included, 97 operated with conventional technique and 56 with laser technique. Postoperative GAP ≤ 10 dB was obtained in 85.6% of the total sample, 82.5% in the conventional technique and 91.1% in the laser technique. Analysis of covariance showed no significant differences in the three surgery outcomes between the two groups (PTA, p = 0.277; GAP, p = 0.509 and SDS, p = 0.530). Regarding surgical complications, sensorineural damage was higher in the conventional technique group (p = 0.05). On the other hand, there were four cases of facial paresis, all in the laser group, three of them with the 980 nm laser.

CONCLUSIONS

Stapedotomy offered a high percentage of hearing success in the two groups studied. There were no significant differences in audiometric result, but there was a differential presentation of complications, being more frequent sensorineural hearing loss in the conventional technique group and facial paresis in the laser group.

Evaluation of tooth color change after a bleaching process with different lasers

The aim of this in vitro study was to evaluate the efficiency of diode laser-activated bleaching systems for color change of teeth. 75 extracted teeth were studied in five different bleaching protocols. Group 1: diode laser 445 nm, 320 µm fiber, 0.5W, continuous wave mode, dose 53 J/cm2. Group 2: diode laser 970 nm, 320 µm fiber, 1W, continuous wave mode, dose 106.10 J/cm2. Group 3: diode laser 940 nm, bleaching handpiece, 7W, continuous wave mode, dose 105 J/cm2. Group 4: diode laser 940 nm, 300 µm fiber, 2W, continuous wave mode, dose 47.16 J/cm2. Group 5: bleaching process without laser activation. In groups 1, 2 and 5, teeth were bleached with Perfect Bleach Office + and in groups 3 and 4, LaserWhite20 bleaching gel was used. Tooth color was determined immediately after the bleaching process using a spectrophotometer. Color change data on the CIE L * a * b* system was analyzed statistically by the one-way ANOVA and Tukey's HSD test. All bleaching procedures resulted in a change of color. All laser groups (∆E * ab > 3) have statistically larger ∆E * ab values than the control group (∆E * ab = 0.73) (p < 0.05). The diode laser 445 nm has the largest ∆E * ab value (∆E * ab = 4.65) and results in a significantly higher color difference than all other groups. In terms of color score difference in VITA Shades, all laser-activated groups lead to a lightening effect while the control group leads to only a slight lightening effect. The diode laser 445 nm produced the greatest color difference. Laser-activated bleaching is more effective than conventional bleaching without light activation. The diode laser 445 nm performs best in this in vitro study.

The Effect of Two Different Wavelengths of Diode Laser on the Shear Bond Strength of Composite to Dental Enamel after Bleaching Process: An In Vitro Study

INTRODUCTION

In recent years, tooth whitening has become one of the most popular ways of achieving the original tooth color. The effect of whitening gel can be improved through heat, light or laser. The bond strength between the enamel and the composite can be reduced through bleaching and laser radiation. The purpose of this study is to assess the shear bond strength of resin composite to enamel after a bleaching process using hydrogen peroxide, with and without a laser (970 nm and 445 nm lasers).

METHOD

This study used 51 extracted anterior teeth without caries that were divided into three groups. A 40% hydrogen peroxide gel was used on the enamel of all teeth. The control group received bleaching without a laser. Both the second and third treatment groups received bleaching with a laser, one with 970 nm and the other with 445 nm. After the bleaching process, all groups had etching, bonding and curing of the composite performed. Lastly, the shear bond strength between the enamel and the composite was measured and the failure modes were recorded. The data were compared using a one-way ANOVA test.

RESULTS

The mean shear bond strength between the enamel and the composite in the 445 nm group three (445 nanometer) was significantly lower than the other groups (p < 0.05). There was no significant difference between the control and the 970 nm groups (p = 0.2).

CONCLUSION

According to the laser wavelengths and parameters that were used in this study and the results of this study, office bleaching with a 445 nm laser weakened the shear bond strength between the enamel and the composite.

Comparative evaluation of thermal impact of 980nm diode laser on soft tissue using irrigation and non-irrigation systems: A histomorphometric study

Background

Diode laser is one of the most captivating technologies in dental practice. In periodontics, when used at appropriate settings, it possesses the best properties for selective surgical and nonsurgical procedures such as subgingival calculus removal without a thermal change of the root surface, and also provides tissue surface sterilization. However, lasers always produce a certain amount of thermal damage to the soft tissues. Therefore, this study aimed to comparatively evaluate the thermal impact of 980-nm diode laser incisions, when used with irrigation versus nonirrigation systems.

Materials and Methods

The study was conducted on 24 gingival tissue samples obtained from the goat's mandible and maxilla. The samples were divided into two groups of 12 samples each, and laser incisions were given in 4 power settings, using 980-nm diode laser in super short pulse mode, with and without saline irrigation. Martius Scarlet Blue staining technique was used to prepare the histological slides. Then, slides were examined under a research microscope (Olympus CX 21), and the pictures of the slides were taken by mounting the camera onto the microscope mobile mount. The microscopic images hence obtained were analyzed for the depth and width of the incisions, area of carbonization, necrosis, and reversible damage, using the Digimizer image analysis software.

Results

The results of this study demonstrated that the mean incision depth was higher (592.49 ± 180.97, P < 0.05), with less carbonization (25.52 ± 29.21, P = 0.00) and less necrosis (311.63 ± 156.441, P < 0.05) in the laser incisions with irrigation, as compared to the laser incisions given without irrigation system.

Conclusion

Within the limitations of this study, it can be concluded that using an irrigation system causes less collateral damage while maintaining the incising efficiency of the diode laser. Further studies with a higher sample size, controlled irrigation systems, and incision techniques are needed to evaluate the efficiency of diode lasers for the clinical explanation of the results.

The improvement of pain symptoms in patients with burning mouth syndrome through combined laser and medication therapy

BACKGROUND

The etiology of Burning Mouth Syndrome (BMS) remains unclear.

OBJECTIVE

To explore the differences in the therapeutic efficacy of pain improvement between medication therapy and laser therapy in patients with BMS.

METHODS

45 BMS patients were randomly divided into three groups: The Combination therapy group (Group A, n= 15), The Medication therapy group (Group B, n= 15), and the Laser therapy group (Group C, n= 15). The pain condition of the patients was evaluated using the Numeric Rating Scale (NRS), and the improvement in pain before and after treatment was compared among the three groups.

RESULTS

All three groups (A, B, and C) showed a significant reduction in NRS scores after treatment, with statistically significant differences observed among the different groups. Group A exhibited the most significant improvement, with a statistically significant difference before and after treatment.

CONCLUSION

Laser and medication therapy are effective methods for reducing oral burning pain * symptoms, and their combined use yields more significant therapeutic effects.

Wound healing after therapy of oral potentially malignant disorders with a 445-nm semiconductor laser: a randomized clinical trial

OBJECTIVES

Oral potentially malignant disorders (OPMDs) are the most clinically relevant precursor lesions of the oral squamous cell carcinoma (OSCC). OSCC is one of the 15 most common cancers worldwide. OSCC is with its high rate of mortality an important cause of death worldwide. The diagnosis and therapy of clinically relevant precursor lesions of the OSCC is one of the main parts of prevention of this malignant disease. Targeted therapy is one of the main challenges concerning an oncologically safe tissue removal without overwhelming functional and aesthetic impairment.

MATERIALS AND METHODS

In this randomized controlled trial, a newly introduced intraoral 445-nm semiconductor laser (2W; cw-mode; SIROLaser Blue, Dentsply Sirona, Bensheim, Germany) was used in the therapy of OPMDs. Duration and course of wound healing, pain, and scar tissue formation were compared to classical cold blade removal with primary suture by measuring remaining wound area, tissue colorimetry, and visual analogue scale. The study includes 40 patients randomized using a random spreadsheet sequence in two groups (n1 = 20; n2 = 20).

RESULTS

This comparative analysis revealed a significantly reduced remaining wound area after 1, 2, and 4 weeks in the laser group compared to the cold blade group (p < 0.05). In the laser group, a significantly reduced postoperative pain after 1 week was measured (p < 0.05).

CONCLUSION

Laser coagulation of OPMDs with the investigated 445-nm semiconductor laser is a safe, gentle, and predictable surgical procedure with beneficial wound healing and reduced postoperative discomfort.

CLINICAL RELEVANCE

Compared to the more invasive and bloody cold blade removal with scalpel, the 445-nm semiconductor laser could be a new functional less traumatic tool in the therapy of OPMDs. The method should be further investigated with regard to the identification of further possible indications.

TRAIL REGISTRATION

German Clinical Trials Register No: DRKS00032626.

In Vitro Assessment of SWEEPS and Antimicrobial Photodynamic Therapy Alone or in Combination for Eradicating Enterococcus faecalis Biofilm in Root Canals

OBJECTIVES

This study investigates the efficacy of antimicrobial photodynamic therapy (aPDT) using riboflavin and a blue diode laser (BDL), combined with shock wave-enhanced emission photoacoustic streaming (SWEEPS), against Enterococcus faecalis.

MATERIALS AND METHODS

A total of 48 extracted single-rooted human teeth were used. The root canals were instrumented, sealed at their apices, had the smear layer removed, and then underwent autoclave sterilization. Subsequently, each canal was inoculated with E. faecalis bacterial suspension and allowed to incubate for ten days. After confirming the presence of biofilms through scanning electron microscopy (SEM) in three teeth, the remaining teeth were randomly allocated into nine groups, each containing five teeth: control, 5.25% sodium hypochlorite (NaOCl), BDL, SWEEPS + normal saline, SWEEPS + NaOCl, riboflavin, riboflavin + SWEEPS, riboflavin + BDL, and riboflavin + BDL + SWEEPS. After the treatment, the numbers of colony-forming units (CFUs)/mL were calculated. The data were analysed using one-way ANOVA followed by Tukey's test for comparisons.

RESULTS

All groups, with the exception of the BDL group, exhibited a significant reduction in E. faecalis CFU/mL when compared to the control group (p < 0.001). The difference in CFU/mL value between riboflavin + BDL + SWEEPS and riboflavin + SWEEPS was significant (p = 0.029), whereas there was no significant difference between riboflavin + BDL + SWEEPS and riboflavin + BDL (p = 0.397). Moreover, there was no statistically significant difference between the riboflavin + SWEEPS group and the riboflavin + BDL group (p = 0.893).

CONCLUSIONS

The results demonstrated that combining the SWEEPS technique with riboflavin as a photosensitizer activated by BDL in aPDT effectively reduced the presence of E. faecalis in root canals.

The Safety and Efficacy of the 445-nm Blue Laser for Operative Management of Benign Nonvascular Laryngeal Lesions

The 445-nm blue laser combines the features of photocoagulative vascular lasers and cutting lasers in one device. The purpose of the present study was to evaluate the safety and efficacy of the 445-nm blue laser for the treatment of benign laryngeal pathologies, other than vascular lesions. Outcomes were compared to those when already-established therapies were used.

METHODS

Adult voice center patients who underwent surgical intervention for vocal fold (VF) mass, VF scar, laryngeal stenosis, laryngeal web, or Reinke's edema were included in this retrospective study. Outcomes were compared to those achieved when traditional treatment modalities were used, including cold steel, CO2 laser, potassium-titanyl-phosphate (KTP) laser, and coblator. Strobovideolaryngoscopy footage was evaluated using a previously described model at four time points: postoperative visit #1: 1-14 days, postoperative visit #2: 30-60 days, postoperative visit #3: 61-365 days, postoperative visit #4: >365 days.

RESULTS

Eighty cases using the blue laser and 153 controls (n = 78 cold steel, n = 51 KTP laser, n = 22 CO2 laser, n = 2 coblator) were included in this study. Procedures performed using blue laser included VF mass excision (n = 45), VF scar reduction (n = 16), laryngeal stenosis resection/repair (n = 25), laryngeal web excision (n = 7), and reduction of Reinke's edema (n = 1). On postoperative strobovideolaryngoscopy examination, the surgical objective score did not differ significantly between the blue laser cohort and all controls at any postoperative visit. VF edema did not differ significantly between the blue laser cohort and all controls at any postoperative visit. VF hemorrhage scores were significantly lower in the blue laser cohort compared to all controls at the first postoperative visit, but hemorrhage had resolved almost entirely by the second postoperative visit in all groups. Postoperative VF stiffness was worse in the blue laser group at the third postoperative visit compared to controls, but both groups had improved to similar levels by the fourth postoperative visit. The rate of lesion recurrence (24.29% versus 17.19%) did not differ significantly between the blue laser cohort and controls on multivariate analysis (Odds ratio [OR] = 1.081 [0.461-2.536]). The complication rate (12.50% versus 10.46%) did not differ significantly between the blue laser cohort and all controls on multivariate analysis (OR = 0.992 [0.375-2.624]). The blue laser was associated with a lower rate of revision surgery (30.00% versus 34.64%) on multivariate analysis (OR = 0.380 [0.168-0.859]).

CONCLUSION

The 445-nm blue laser is safe and effective for the management of benign laryngeal lesions. It has efficacy and safety similar to those of traditional treatment modalities (including cold steel, CO2 laser, and KTP laser). Use of the blue laser may lead to lower rates of early postoperative hemorrhage and revision surgery. No adverse effects attributed directly to the use of the blue laser were observed in this study. Further research is encouraged to confirm or refute these findings.

Comparative study of soft tissue surgery by visible and infrared laser radiation

To compare the cutting properties of lasers with different wavelengths (445 nm, 532 nm and 808 nm) used in cutting blood-rich tissues. Porcine myocardial tissue was cut using 2.3-15 W laser radiation in contact and non-contact modes with an optical fiber or focusing handpiece. The cut depth and coagulation zone width were determined histologically. The 445-nm laser achieved the greatest cut depth for all cutting parameters (p < 0.01). The blue laser gave the smallest coagulation width to cut depth ratio. Results of the study are consistent with the assumption that a 445 nm blue laser may have better cutting properties than green and infrared lasers due to the high absorption of radiation at this wavelength in hemoglobin and, consequently, in the biological blood-rich tissue.

Use of lasers in gastrointestinal endoscopy: a review of the literature

Lasers emit highly directional light with consistent wavelengths, and recent studies have demonstrated their successful applications in gastrointestinal endoscopic therapy. Although argon plasma coagulators (APC) became the preferred treatment option due to improved safety profile and lower costs, advancements in laser and optic fiber manufacturing have reignited interest in laser treatment. Different laser wavelengths have distinct features and applications based on their tissue absorption coefficient. Lasers with shorter wavelengths are effectively absorbed by hemoglobin, resulting in a good coagulation effect. Near-infrared lasers have ability to ablate solid tumors, while far-infrared lasers can make precise mucosal incisions without causing peripheral thermal damage. Lasers have proven to be highly applicable to endoscopy devices such as endoscopes, endoscopic ultrasound (EUS), double-balloon enteroscopes (DBE), and endoscopic retrograde cholangiopancreatography (ERCP), making them a potent tool to enhance the effectiveness of endoscopic treatments with minimal adverse events. This review aims to help readers understand the applications and effectiveness of lasers in gastrointestinal endoscopy, with the potential to promote the development and application of laser technology in the medical field.

Evaluation of cutting efficiency and thermal damage during soft tissue surgery with 940 nm-diode laser: An ex vivo study

OBJECTIVES

To investigate quantitatively the cutting efficiency and the thermal effects in the surrounding soft tissues of incisions that are induced by a 940 nm-diode laser with different power settings.

MATERIALS AND METHODS

Fifty-four gingival samples were prepared from the lower jaws of freshly slaughtered German-land race pigs and were randomly divided into 9 groups (n = 6) according to the adjusted output power (1, 1.5, 2, 2.5, 3, 3.5, 4, 5 and 6 W). Five incisions were implemented for each sample using a diode laser (940 nm) in continuous wave with an initiated tip resulting in 30 incisions for each experimental group utilizing a three-dimensional computer-controlled micropositioner. The samples were prepared for histometric evaluation using a transmitted light microscope. The cutting depth and width and the thermal damage were recorded for each sample and the efficiency factor γ was calculated.

RESULTS

The highest cutting efficiency (γ_z  = 0.81 ± 0.03) exhibited the group with 5 W output power (p < 0.05), while the lowest (γ_z  = 0.45 ± 0.11) showed the 1-W group (p < 0.05). Over 3.5 W there was a rapid increase in the size of thermal damage of the incisions, especially for 6 W, which presented the largest.

CONCLUSIONS

The most effective power parameters of diode laser (940 nm) for soft tissue surgery were from 3 to 5 W. The outcomes of the current study may help to establish clinical protocols for the use of diode lasers (940 nm) in soft tissue surgery in contact mode assisting dental professionals to achieve optimal clinical results and avoid complications.

The Impact of Laser Thermal Effect on Histological Evaluation of Oral Soft Tissue Biopsy: Systematic Review

The aim of the study is to review the literature to observe studies that evaluate the extent of the thermal effect of different laser wavelengths on the histological evaluation of oral soft tissue biopsies. An electronic search for published studies was performed on the PubMed and Scopus databases between July 2020 and November 2022. After the selection process, all the included studies were subjected to quality assessment and data extraction processes. A total of 28 studies met the eligibility criteria. The most studied laser was the carbon dioxide (CO₂) laser, followed by the diode laser 940 nm-980 nm. Six studies were focused on each of the Erbium-doped Yttrium Aluminium Garnet (Er:YAG), Neodymium-doped Yttrium Aluminum Garnet (Nd:YAG) lasers, and diode lasers of 808 nm and 445 nm. Three studies were for the Potassium Titanyl Phosphate (KTP) laser, and four studies were for the Erbium, Chromium-doped Yttrium, Scandium, Gallium, and Garnet (Er,Cr:YSGG) laser. The quality and bias assessment revealed that almost all the animal studies were at a low risk of bias (RoB) in the considered domains of the used assessment tool except the allocation concealment domain in the selection bias and the blinding domain in the performance bias, where these domains were awarded an unclear or high score in almost all the included animal studies. For clinical studies, the range of the total RoB score in the comparative studies was 14 to 23, while in the non-comparative studies, it was 11 to 15. Almost all the studies concluded that the thermal effect of different laser wavelengths did not hinder the histological diagnosis. This literature review showed some observations. The thermal effect occurred with different wavelengths and parameters and what should be done is to minimize it by better adjusting the laser parameters. The extension of margins during the collection of laser oral biopsies and the use of laser only in non-suspicious lesions are recommended because of the difficulty of the histopathologist to assess the extension and grade of dysplasia at the surgical margins. The comparison of the thermal effect between different studies was impossible due to the presence of methodological heterogeneity.

Treatment of Gingival Growth Due to Amlodipine Use With a 445-nm Diode Laser: A Case Report

Amlodipine is a widely used calcium channel blocker associated with gingival enlargement. The effects of amlodipine on gingival enlargement vary depending on the duration of drug use and the dose of the active substance. This report presents a 56-year-old male hypertensive patient who had been using amlodipine (5 mg/day orally, single dose) for the last two years. He presented with diffuse gingival enlargement, complaining of gingival swelling and bleeding. This case report demonstrates the treatment of gingival enlargement with a novel 445-nanometer (nm) blue light diode laser after drug change and oral hygiene, which resulted in permanent and satisfactory clinical results.

Effects of a 445 nm diode laser and silver diamine fluoride in preventing enamel demineralisation and inhibiting cariogenic bacteria

OBJECTIVE

To study the effects of a 445 nm diode laser (L) and silver diamine fluoride (F) on preventing enamel demineralisation and inhibiting cariogenic bacteria.

METHODS

Thirty-three enamel slices were sectioned each into four blocks for four groups to receive L with F (LF), F, L and Water (W, control). Ten blocks from each group were used to evaluate demineralization. Surface morphology, lesion depth and nanohardness of the blocks after pH-cycling were studied by scanning electron microscopy (SEM), nanohardness test, and micro-computed tomography, respectively. Twenty-three blocks per group were used for biofilm assessment. Morphology, viability, and growth kinetics of the Streptococcus mutans biofilm were assessed by SEM, confocal laser scanning microscopy, and the counting of colony-forming units (CFUs), respectively.

RESULTS

SEM images of LF-treated enamel showed an intact surface compared with other groups. Nanohardness (GPa) for LF, F, L and W were 1.43±0.17, 1.01±0.11, 1.04±0.13 and 0.73±0.14, respectively (p<0.001; LF>F, L>W). Their lesion depths (µm) were 46±8, 52±6, 88±13 and 111±9, respectively (p<0.001; LF, F<L<W). SEM showed few bacteria for LF and F compared with other groups. Their dead-live ratio were 1.67±0.13, 1.60±0.15, 0.39±0.05 and 0.32±0.05, respectively (p<0.001; LF, F>L>W). Log CFUs for LF, F, L and W were 4.2±0.3, 4.5±0.2, 7.9±0.3 and 9.4±0.2, respectively (p<0.05; LF<F<L<W). Two-way ANOVA analysis revealed an interaction effect on nanohardness and Log CFUs between the laser irradiation and SDF treatment (p<0.001).

CONCLUSION

This study showed a superior caries preventive effect of a combined treatment of the diode laser and SDF. Because diode laser and SDF are affordable and readily available, clinicians can provide this treatment to their patients for caries prevention.

CLINICAL SIGNIFICANCE STATEMENT

Diode lasers are handy, afforable and readily avaliable to clinicians. This study provides information of use of 445 nm diode laser for caries prevetion. The laser irradiation hopefully can be added before conventional topical SDF application.

Lasers for benign prostatic hyperplasia (hybrid, blue diode, TFL, Moses). Which one to choose?

PURPOSE OF REVIEW

To present the evidence of latest developments of lasers for the surgical treatment of benign prostatic hyperplasia (BPH). We focused on recent advancements in Ho:YAG laser such as Moses technology, the Thulium Fiber Laser (TFL), the blue diode laser, and hybrid laser.

RECENT FINDINGS

Laser enucleation of prostate techniques using either Ho:YAG laser with the Moses technology and Moses 2.0, or TFL seem efficient and safe compared with the standard enucleation using Ho:YAG laser. Only in vitro studies evaluated the blue diode laser and hybrid laser (combination of a continuous wave TFL and blue diode laser). Blue diode laser showed intermediate incision depth and minimal coagulation depth compared with Ho:YAG laser and Super Pulse TFL. Hybrid laser showed deep incision depth and small coagulation area compared with Ho:YAG laser and continuous wave TFL.

SUMMARY

Surgical treatment of BPH using Moses technology, Moses 2.0, and TFL shows encouraging results comparable to the standard enucleation using Ho:YAG laser. Only in vitro data are currently available for blue diode laser and hybrid laser. Future well-designed studies comparing these technologies and evaluating them on specific risk groups of patients as well as the long-term durability of outcomes are needed.

Power Output of Two Semiconductor Lasers: An Observational Study

The objective of this study was to evaluate the power output of two dental devices. The study examined two semiconductor lasers, namely, SIROLaser Blue (445 nm, 970 nm) and Picasso (810 nm). The power output performance was studied at the maximum output power of the devices. The study compared the preset power output measured by a power meter in a continuous-wave mode and in pulsed mode at 50% duty cycles. Ten 60 s measurements were performed for each setting. The largest difference between the stipulated and the actual output power at continuous-wave (D-cw) and pulsed (D-p) modes was calculated. Moreover, the percentage variations in the mean output power at continuous-wave (%D-cw) and pulsed (%D-p) modes were calculated. The D-cw values for 445 nm, 970 nm, and 810 nm lasers were 0.7 W, 0.5 W, and −0.3 W, respectively, and %D-cw values were 21%, 23%, and −8%, respectively. The D-p values for 445 nm, 970 nm, and 810 nm lasers were 1.1 W, 0.5 W, and −0.1 W, respectively, whereas the %D-p values were 37%, 26%, and −3%, respectively. This study found that the actual power is not necessarily lower but can be higher than the displayed power output. Clinicians are recommended to calibrate the laser output by using a power meter before use.

Use of Blue and Blue-Violet Lasers in Dentistry: A Narrative Review

Introduction: Blue and blue-violet diode lasers (450 and 405 nm) seem to represent an interesting approach for several clinical treatments today. The aim of this narrative review is to describe and comment on the literature regarding the utilization of blue and blue-violet lasers in dentistry. Methods: A search for "blue laser AND dentistry" was conducted using the PubMed database, and all the papers referring to this topic, ranging from 1990 to April 2020, were analyzed in the review. All the original in vivo and in vitro studies using 450 nm or 405 nm lasers were included in this study. All the articles on the LED light, laser wavelengths other than 405 and 450 nm and using lasers in specialties other than dentistry, as well as case reports, guideline papers and reviews were excluded. Results: From a total of 519 results, 47 articles met the inclusion criteria and were divided into 8 groups based on their fields of application: disinfection (10), photobiomodulation (PBM) (4), bleaching (1), resin curing (20), surgery (7), periodontics (1), endodontics (1) and orthodontics (3). Conclusion: Blue and blue-violet diode lasers may represent new and effective devices to be used in a large number of applications in dentistry, even if further studies will be necessary to fully clarify the potentialities of these laser wavelengths.

Thermal effect of a 445 nm diode laser on five dental implant systems: an in vitro study

The purpose of this in vitro study was to assess the thermal effect of the 445 nm diode laser on five dental implant systems. In an ailing implant protocol, five commercial dental implant systems were subjected to 445 nm diode laser energy at different wattages [W], exposure times, and modes (continuous wave [CW] vs. pulsed and contact vs. non-contact) of laser beam delivery. Scanning electron microscopy (SEM) allowed the evaluation of irradiated implant surfaces. A total of 2880 temperature response curves were recorded. The 445 nm wavelength caused temperature increases of more than 10 °C at or above the 0.8 W power level working in CW mode for 5 s and in pulsed mode at 3 W for 20 s with 10% duty cycle. Highest rises in temperature were seen in the Straumann Pure ceramic implant, lowest in the Ankylos system. SEM analysis revealed no surface alteration in all systems in non-contact mode. The applied laser is not inherently safe for the decontamination of ailing implants. From the results of this study it was concluded that different dental implant materials and geometries show different temperature response curves when subjected to 445 nm diode laser energy. Clinicians ought to be aware of this. Therefore, manufacturers of laser devices should provide implant-specific laser parameters for the decontamination process. However, both laser irradiation systems can prevent harmful rises in temperature and surface alteration when used at moderate laser parameters.

Blue Light Laser Results in Less Vocal Fold Scarring Compared to KTP Laser in Normal Rat Vocal Folds

OBJECTIVES

Preliminary investigations suggest that a novel blue light (BL) laser with a wavelength of 445 nm is comparable to the commonly utilized potassium titanyl phosphate (KTP) laser (532 nm) for treatment of various laryngeal pathologies. The objective of the current study is to make a direct histological comparison of the degree of vocal fold scarring after either BL or KTP laser treatment in an animal model.

STUDY DESIGN

This was a randomized controlled study using rats.

METHODS

Twenty-four Sprague-Dawley rats were randomized to BL or KTP laser treatment. Laser was delivered in non-overlapping pulses to normal rat vocal folds. Larynges in each group were harvested at three time points: post-operative day 1, 30, and 90. Three animals served as negative controls. The excised whole larynges were sectioned transversely and stained with hematoxylin/eosin and trichrome. Presence of subepithelial inflammation and protein deposition/fibrosis indicative of scarring were scored semi-quantitatively (from grade 1-3) by two pathologists blinded to treatment groups.

RESULTS

Between-group comparison showed that both laser treatments resulted in significantly elevated subepithelial protein deposition/fibrosis 90 days after treatment compared to negative controls (BL: 2 ± 0; KTP: 2.67 ± 0.29; control: 1.17 ± 0.29; P < .05). However, the degree of protein deposition/fibrosis was significantly higher in the KTP group compared to the BL group (P = .016). Within-group comparison showed that the KTP group showed evidence of fibrosis as early as 30 days after treatment, which was not observed in the BL group.

CONCLUSIONS

The current study suggests that the degree of scarring is significantly less after BL laser treatment compared to KTP in normal rat vocal fold tissue.

LEVEL OF EVIDENCE

NA Laryngoscope, 131:853-858, 2021.

In vitro evaluation of the safety and efficacy of a high-power 450-nm semiconductor blue laser in the treatment of benign prostate hyperplasia

A 450-nm blue laser may be suitable to treat benign prostate hyperplasia (BPH) due to its haemoglobin absorption characteristic. The present study compared a novel high-power 450-nm semiconductor blue laser with other lasers marketed for in vitro soft tissue ablation, to evaluate the safety and efficacy of the 450-nm laser in BPH surgery. With the in vitro tissues on an experimental platform in water, the vaporization efficiency and coagulation layer thickness of the novel 450-nm laser and commercially available 532-nm, 980-nm, and 1470-nm lasers were measured at the same power (120 W). The damage to the adjacent tissue and the working noise were also measured. The vaporization efficiency was proved to be 450-nm laser > 532-nm laser > 1470-nm laser > 980-nm laser. Comparison of coagulation layer thickness was as follow: 980-nm laser > 1470-nm laser > 532-nm laser > 450-nm laser. The degree of tissue damage caused by the 450-nm and 532-nm lasers increased with the decrease in distance and increase in time (these are safe when a sufficient distance and short irradiation time are maintained). The heating ability of 980-nm and 1470-nm lasers was much greater than that of 450-nm and 532-nm lasers. The working noise was lower in 450-nm and 1470-nm lasers. The novel 450-nm laser has the advantages of highly efficient tissue vaporization, creating a thin coagulation layer, and low working noise. These characteristics suggest that the novel 450-nm laser may be a promising choice for the surgical treatment of BPH.

Quantitative determination of cut efficiency during soft tissue surgery using diode lasers in the wavelength range between 400 and 1500 nm

Within the scope of this ex vivo study, the cut efficiency was investigated with eight diode laser wavelengths in the range from 400 to 1500 nm. Incisions on porcine gingiva samples were generated in CW-mode at a power range of 0.5–4 W using a bare fiber (∅ = 320 μm) in contact and non-contact mode at a cut speed of 2 mm/s. Cut depths, cut widths, and thermal damages were recorded based on histological sections and were evaluated via measurement masks. Moreover, with respect to the controllability of a therapeutic measure, an efficiency factor was defined. At powers above 2 W, for 445 nm, the maximum cut depth was 820 μm and 344 μm for 810 nm, respectively. At all wavelength and power ranges, the cut width averaged 125 μm. At minimum output power (0.5 W), the spatial expansion of the thermal damage in the tissue surface layer corresponds in the blue/green wavelength range from the very beginning of the laser impact to the fiber core diameter. It could be shown that increases in the diode laser power output do not correlate to the same extent with the incision depth nor with thermal damage to tissue.

The effect of laser-activated bleaching with 445 nm and 915 nm diode lasers on enamel micro-hardness; an in vitro study

BACKGROUND

The appearance of the teeth is of great importance to patients, particularly tooth color. In recent years, tooth whitening has been one of the most popular ways to restore tooth color. Bleaching gels can be affected by heat, light or laser, which can improve its effects. This study intends to examine the effects of two different wavelengths of diode laser (445 & 915 nm) after the bleaching process, on the enamel micro-hardness.

METHODS

A total of 65 caries-free humans third molars were randomly divided into five groups (N = 13): first group: bleaching gel activated with 915 nm diode laser (1.5 W), second: bleaching gel activated with 915-nm (2.5 W), third: bleaching gel activated with 445-nm (1 W), fourth: bleaching gel activated with 445-nm (1.5 W), fifth (control group): bleaching gel without laser activation. Micro-hardness test (Vickers test) was performed before and after the treatment. The data were submitted to repeated measurement ANOVA and Tukey's HSD post hoc test (α = 0.05).

RESULTS

Enamel micro-hardness did not change significantly in groups 3 and 4 but decreased in groups 1 and 2. Group 2 showed the most reduction in micro-hardness. There were no significant changes in the control group.

CONCLUSION

According to the results of this study, 445 nm Diode laser did not reduce enamel micro-hardness, making it suitable for bleaching treatments. However, more studies are required to consider other factors, such as color changes and pulp temperature.

Applications of Lasers in Refractory Periodontitis: A Narrative Review

OBJECTIVE

The purpose of the study is to evaluate the various lasers in dentistry and to investigate if it can be used for treatment of refractory periodontitis.

METHODS

The study followed partially the PRISMA guidelines as it is a narrative review. A number of articles were selected from a period of 1980 to 2020 from databases, PubMed, PubMed central, Cochrane and Scopus. Articles related to the effects of lasers on periodontitis both refractory and aggressive were investigated.

RESULTS

After reviewing the literature, 70 articles were found, related to application of lasers in periodontal diseases. Out of the 70, 11 articles pertained to the effect of laser for the treatment of Refractory and inflammatory periodontitis. 5 articles related to experimental animal models, one pertaining to in-vitro and six studies related to in-vivo in human cohorts.

DISCUSSION

It was found that lasers if used in controlled parameters by incorporating laser assisted treatment such as Photodynamic therapy and low level laser therapy can be of use as an adjunct therapy for treatment of refractory periodontitis. The use of different wavelengths in the initial and maintenance phase of periodontal disease plays a positive role. The presence of in-vitro and animal model studies is one of the limitation to this study. The available studies have shown marked reduction in inflammation and better clinical and microbiological parameters. The drawback of this study is the limited literature involving laser management for refractory periodontitis in human cohorts.

CONCLUSION

Different wavelengths of laser and choice of laser assisted periodontal treatment plays an important role in the overall progress and prognosis of periodontal disease activity.

The impact of the laser fiber-tissue distance on histological parameters in a porcine kidney model

PURPOSE

To evaluate the impact of the fiber-tissue distance on histological parameters in a porcine kidney model.

METHODS

Four lasers were tested at 60 W using a 600-µm bare-ended fiber: a continuous wave (cw) thulium fiber laser (TFL), a super pulsed (SP) TFL, a Ho:YAG laser, and a blue diode laser (BDL). All tissue samples were mounted on a motorized XY-translation stage. The fiber-tissue distance was changed within a range from 0to 6 mm. Ten incisions were made with each laser at each distance. Afterwards, the tissue samples were sliced with a microtome for lactate dehydrogenase staining to determine zones of thermal damage.

RESULTS

In contact mode, the largest incision depth was found for the cw TFL (1.7 ± 0.1 mm) compared to the SP TFL (1.0 ± 0.1 mm), BDL (0.9 ± 0.1 mm) and HoYAG laser (1.1 ± 0.1 mm), respectively. With regard to the coagulative properties, the SP TFL and the Ho:YAG laser showed comparable coagulation depths with 0.7 ± 0.1 and 0.6 ± 0.1 mm, respectively. At 2 mm fiber-tissue distance, the Ho:YAG laser was the only laser that vaporized tissue (incision depth: 0.2 ± 0.1 mm). The BDL was the only laser that caused coagulation at a distance of 3-5 mm.

CONCLUSION

Our results support the clinical observation that cw TFL must be defocused for best coagulation, while the coagulation depth of the SP TFL remains nearly constant within the range of 0-3 mm. Increasing the distance of the laser fiber to the tissue up to 5 mm did not cause significant differences with regard to coagulation depth using the BDL.

Histological Effects of an Innovative 445 Nm Blue Laser During Oral Soft Tissue Biopsy

Continuously evolving laser devices can be used in various fields; they are an alternative to the traditional cold blade surgery to perform biopsies of oral soft tissues. The aspect focused on in this paper is the possibility to use the 445 nm diode laser (Eltech K-Laser srl, Treviso, Italy) in complete safety, by evaluating its thermal effects during microscopy. A histological evaluation of the alteration of the peri-incisional edges on 10 samples was realized. All excisional biopsies were related to clinically unsuspected lesions and performed by the same expert operator. The surgical procedure was performed with the same laser parameters and the same pathologist evaluated the thermal effect on the samples. An average value of the detected tissue alteration was calculated; the average damage of the epithelium was 650.93 μm, while in the connective tissue it was 468.07 μm. In all the cases a clear diagnosis was possible, and no clinical complications were observed; so, the 445 nm diode laser proved to be a device that can be safely used for biopsies of clinically unsuspicious lesions. Due to the small number of cases, this in vivo preliminary experience needs to be extended.

Comparison of diode laser - Oral tissue interaction to different wavelengths. In vitro study of porcine periodontal pockets and oral mucosa

Background

The aim of this in vitro study was to evaluate the effect of diode lasers at different wavelengths and power settings in handmade incisions in periodontal pockets and in oral mucosa of porcine tissue considering thermal damage, necrosis and the affected area of the soft tissue.

Material and Methods

Combining the following laser wavelengths, 445nm, 532nm (KTP), 810nm, 980nm, 1064nm and 1470nm, and a power range from 0.5W to 2.0W in a continuous wave mode (CW), we made handmade incisions in porcine periodontal pockets and oral mucosa. After histological processing, we measured the area of ​​lost tissue, the area of ​​thermal damage and the area of ​​necrosis. Then, we performed ANOVA to evaluate the difference between groups and two-way ANOVA to identify the influence of the laser-type variables and the power on the results.

Results

We applied an ANOVA test to evaluate the results, where statistical analysis showed clear differences between the 1470nm and 810nm laser groups that refer to thermal damage and necrosis in the periodontal pocket surface. Regarding the oral mucosa surface, the 1064nm laser showed differences in the analysis of lost tissue. According to the applied power, all the variables we studied (lost tissue area, area of thermal damage and necrosis) showed higher values when using a power of 2.0W instead of 0.5W.

Conclusions

According to our results, the 810nm diode laser for oral soft-tissue biopsy using power ranges between 0.5W and 2W would be the best choice to avoid thermal damage in peri-incisional margins.

Key words:Laser surgery, soft tissue, diode laser, KTP laser, thermal damage, necrosis.

Using 445 nm and 970 nm Lasers on Dental Implants-An In Vitro Study on Change in Temperature and Surface Alterations

The aim of this study was to evaluate the safety of using a 445 nm laser on dental implants by comparing it with a laser with 970 nm wavelength. Two models, a pig mandible and glass ionomer cement, were used to evaluate the temperature increase in dental implants during laser irradiation with both wavelengths. Temperature was measured every second at four different places on the dental implants. Different power settings, effects of water cooling, distance of the laser fibre to the dental implant and continuous comparison to a pulsed laser beam were tested. Surface alterations on titanium discs after laser irradiation for 4 min at 2.0 W, were analysed in a scanning electron microscope (SEM). The maximum temperature and time to reach each of the thresholds were comparable between the 445 nm and 970 nm lasers. Neither the 445 nm nor the 970 nm wavelength showed any signs of surface alterations on the titanium discs. Using a 445 nm laser on dental implants is as safe as using a 970 nm laser, in terms of temperature increase and surface alterations. Applying a generous amount of cooling water and irradiating in short intervals is important when using lasers on dental implants.

Ex vivo histological analysis of the thermal effects created by a 445-nm diode laser in oral soft tissue biopsy

OBJECTIVE

The aim of this study was to evaluate, ex vivo, the histological effects of 445-nm diode laser (Eltech K-Laser srl, Treviso, Italy), during an oral soft tissue biopsy.

MATERIALS AND METHODS

Thirty samples from pig cadaver tongues were obtained, through five laser settings, in continuous and pulsed wave (CW and PW). Samples were divided into six groups of five pieces each. A control specimen was taken by a scalpel. All samples were examined with an optical microscope by a blinded pathologist. Thermal effects on epithelium and connective tissues were measured with LAS 4.8 software. Finally, a statistical evaluation was made using GraphPadPrism 7.0 software.

RESULTS

All specimens, except one, showed a damage lower than 1 mm. Readability was always optimal; there was a different thermal effect between epithelial and connective tissue and in CW and PW samples, confirmed by statistical analysis too.

CONCLUSIONS

A 445-nm diode laser creates a minimum thermal effect, that has no implications in the histological evaluation of benign lesions. In suspicious lesions, a safety margin of 1 mm, compared with a scalpel, is preferable.

CLINICAL RELEVANCE

A 445-nm diode laser has excellent surgical properties and can manage many arduous clinical cases, such as vascularized lesions. In the excision of suspected lesions, it is necessary to compare, case by case, clinical advantages to possible histological implications.

Feasibility of transgingival laser irradiation for antimicrobial photodynamic therapy

AIM

Diode lasers are commonly used for antimicrobial photodynamic therapy (aPDT). This study aimed to assess the feasibility of transgingival laser irradiation during aPDT and evaluate whether the photosensitizer can be activated.

MATERIALS AND METHODS

Four diode laser settings were assessed for transgingival irradiation: 120 mW, 80 mW, 60 mW, and 40 mW. Fifteen soft-tissue pieces from a pig's lower jaw were prepared. The specimens' thickness was measured and transgingival laser irradiation was performed. A digital power meter measured laser power on the other side of the tissue. The power outcome after staining of the nonbuccal aspect of the tissue with photosensitizer dye was assessed similarly.

RESULTS

Transgingival laser irradiation (average soft-tissue thickness: 0.84 ± 0.06 mm) resulted in different power transmission depending on the power settings and photosensitizer. The lowest values were observed with the 40 mW setting and photosensitizer (median 3.3 mW, max. 5.0 mW, min. 2.3 mW, interquartile range 1.2), and the highest at 120 mW without photosensitizer (median 41.3 mW, max. 42.7 mW, min. 38.0 mW; interquartile range 1.5).

CONCLUSIONS

This study indicates that transgingival irradiation may be suitable for aPDT, since power transmission through the gingival tissue was observed in all specimens. However, the decrease in laser power caused by both the soft tissue and the photosensitizer has to be taken into account.

Temperature and depth evaluation of the in vitro effects of femtosecond laser on oral soft tissue, with or without air-cooling

Femtosecond laser is an effective and safe tool in many surgeries, but the studies of its effect on oral soft tissue ablation are insufficient. This study aimed to investigate the effect of soft tissue ablation with a 1030-nm femtosecond laser on temperature and depth. Twenty Sprague-Dawley rat tongue specimens were obtained and flat-mounted. The 1030-nm femtosecond laser was controlled by a computer system, with a set distance of 4.7 mm between the laser aperture and soft tissue surfaces. Ten specimens were ablated for > 1 min with or without air-cooling for temperature measurement, while the other 10 specimens were ablated for depth measurements, using the following parameters: (i) 3 W, 2000 mm/s; (ii) 3 W, 4000 mm/s; (iii) 5 W, 2000 mm/s; (iv) 5 W, 4000 mm/s; (v) 8 W, 2000 mm/s; (vi) 8 W, 4000 mm/s. Temperature changes were measured using a type-K thermocouple. The depth attained using different power and scanning speed settings was measured by a three-dimensional morphology measurement laser microscope. Laser power, scanning speed, and air-cooling effects were determined. Higher energy and lower speed induced higher temperatures (p < 0.05), which were significantly decreased by air-cooling (p < 0.05). The lowest ablation depth was obtained at 3 W and 4000 mm/s (72.63 ± 6.47 μm) (p < 0.05). The greatest incision depth was achieved at 8 W and 2000 mm/s (696.19 ± 35.37 μm), or 4000 mm/s (681.16 ± 55.65 μm) (p < 0.05). The 1030-nm femtosecond laser application demonstrates clinically acceptable ablation efficiency, without marked temperature damage, in a controlled manner.