Modeling the biomechanics of fetal movements

Selection of the apposite vacuum extractor during operative delivery: A biomechanical study

BACKGROUND

Operative delivery is a technique used during vaginal or cesarean birth to facilitate the patient's labor course through the assistance of a vacuum extractor. This method is increasingly used compared with forceps. This study aimed to investigate the forced effects of vacuum extractors comprising vacuum cups with different thicknesses on the fetal head and the vacuum extractor during vacuum-assisted delivery and to determine the optimal thickness for reducing the failure rate and minimizing neonatal and maternal morbidity.

METHODS

A biomechanical model was developed to examine the impact of vacuum cups with varying thicknesses. This simulation three-dimensional (3D) geometry model was used to evaluate hemispherical-shaped vacuum extractors made of silicone rubber having a similar cup diameter of 70 mm with varying thicknesses (1-5 mm), which were applied to the three models (flat surfaces, hemispherical balls, and fetal head). Under one boundary condition and two different loading conditions, finite element analysis was utilized to simulate the force of vacuum extractors on the fetal head during the process of operative delivery. The main observation indicators were the reaction forces of the constructed model, and von Mises stress on both the vacuum extractors and fetal head.

RESULTS

For the reaction forces on each axis, we found that the sum of the reaction force values on each axis was increased as the thickness of the vacuum extractor was increased, regardless of the surface type. In addition, the reaction force of the fixed-support end was increased with the increased thickness of the vacuum extractor. The von Mises stress distributions of vacuum extractors comprising vacuum cups with different thicknesses, revealed that the thinner the cup, the greater the von Mises stress exerted on the extractor itself regardless of the surface type. The distribution of von Mises stress on the skull structure of the fetal head showed that the thinner the cup, the greater the von Mises stress exerted on the skull structure regardless of the surface type.

CONCLUSION

A thinner vacuum extractor cup may result in greater injury to the fetus; hence, a thicker vacuum extractor cup is preferably utilized during vacuum-assisted operative delivery. Using a thicker vacuum extractor should yield a higher successful delivery rate and reduce fetal injury.

Risk factors and outcomes associated with true knots of the umbilical cord: A retrospective study

OBJECTIVE

To investigate the pregnancy outcomes and independent risk factors associated with true knots of the umbilical cord (TKUC).

MATERIALS AND METHODS

This retrospective study included 8140 deliveries at Fujian Maternal and Child Health Hospital from 2017 to 2021. Mothers and newborns diagnosed with TKUC were included in the TKUC group, while the others were included in the control group. The data were obtained from the hospital's electronic medical record system. Multiple pregnancies were excluded.

RESULTS

The incidence of TKUC was 0.61 %. The TKUC group had significantly higher proportions of advanced maternal age, multiparae and mothers with more than two pregnancies (P < 0.05). The neonates in the TKUC group were more male, had longer lengths and umbilical cords, heavier placentas, and a higher incidence of umbilical cord entanglement (P < 0.05). In terms of pregnancy outcomes, the TKUC group exhibited higher rates of cesarean section and preterm birth (P < 0.001; P < 0.05). However, there were no significant differences in birthweight, Apgar scores, stillbirth rate, and neonatal malformation rate between the two groups (P > 0.05). The results of logistic regression indicated that multiparae (OR = 1.386, P = 0.001), male fetus (OR = 1.499, P < 0.001), excessive long umbilical cord (OR = 11.022, P < 0.001), and umbilical cord entanglement (OR = 1.284, P = 0.019) were risk factors for TKUC.

CONCLUSION

Male fetus, multiparae, umbilical cord entanglement, and especially excessively long umbilical cord were identified as independent risk factors for TKUC. TKUC had a minimal impact on the newborn's condition at birth, while it's associated with higher rates of cesarean section and preterm birth.

On the estimation of hip joint centre location with incomplete bone ossification for foetus-specific neuromusculoskeletal modeling

Childbirth is a complex physiological process in which a foetal neuromusculoskeletal model is of great importance to develop realistic delivery simulations and associated complication analyses. However, the estimation of hip joint centre (HJC) in foetuses remains a challenging issue. Thus, this paper aims to propose and evaluate a new approach to locate the HJC in foetuses. Hip CT-scans from 25 children (F = 11, age = 5.5 ± 2.6 years, height = 117 ± 21 cm, mass = 26 kg ± 9.5 kg) were used to propose and evaluate the novel acetabulum sphere fitting process to locate the HJC. This new approach using the acetabulum surface was applied to a population of 57 post-mortem foetal CT scans to locate the HJC as well as to determine associated regression equations using multiple linear regression. As results, the average distance between the HJC located using acetabulum sphere fitting and femoral head sphere fitting in children was 1.5 ± 0.7 mm. The average prediction error using our developed foetal HJC regression equations was 3.0 ± 1.5 mm, even though the equation for the x coordinate had a poor value of R2 (R2 for the x coordinate = 0.488). The present study suggests that the use of the acetabulum sphere fitting approach is a valid and accurate method to locate the HJC in children, and then can be extrapolated to get an estimation of the HJC in foetuses with incomplete bone ossification. Therefore, the present paper can be used as a guideline for foetus specific neuromusculoskeletal modelling.

The ontogeny of human fetal trabecular bone architecture occurs in a limb-specific manner

Gestational growth and development of bone is an understudied process compared to soft tissues and has implications for lifelong health. This study investigated growth and development of human fetal limb bone trabecular architecture using 3D digital histomorphometry of microcomputed tomography data from the femora and humeri of 35 skeletons (17 female and 18 male) with gestational ages between 4 and 9 months. Ontogenetic data revealed: (i) fetal trabecular architecture is similar between sexes; (ii) the proximal femoral metaphysis is physically larger, with thicker trabeculae and greater bone volume fraction relative to the humerus, but other aspects of trabecular architecture are similar between the bones; (iii) between 4 and 9 months gestation there is no apparent sexual or limb dimorphism in patterns of growth, but the size of the humerus and femur diverges early in development. Additionally, both bones exhibit significant increases in mean trabecular thickness (and for the femur alone, bone volume fraction) but minimal trabecular reorganisation (i.e., no significant changes in degree of anisotropy, connectivity density, or fractal dimension). Overall, these data suggest that in contrast to data from the axial skeleton, prenatal growth of long bones in the limbs is characterised by size increase, without major reorganizational changes in trabecular architecture.

A Volume-Adjustable Artificial Womb for Extremely Preterm Infants

More than 13 million children are born preterm annually. Prematurity-related mortality accounts for 0.9 million deaths worldwide. The majority of those affected are Extremely Preterm Infants (gestational age less than 28 weeks). Immaturity causes organ failure and specific morbidities like germinal matrix hemorrhage, bronchopulmonary dysplasia, and necrotizing enterocolitis. Artificial womb and placenta technologies address these issues. As a bridge-to-life technology, they provide a liquid environment to allow organ maturation under more physiological conditions. The proposed artificial womb can adapt to fetal growth. Volume adjustment is achieved by removing fluid from the interspace between an inner and outer chamber. Results of the in vitro tests showed a temperature constancy of 36.8°C ± 0.3°C without pressure loss over 7 days. The volume of the inner sac was variable between 3.6 and 7.0 L. We designed a filtration and disinfection system for this particular purpose. This system has proven strong disinfection capabilities, effective filtering of metabolic waste, and the ability to avoid phospholipid washout. The presented artificial womb has sufficient volume variability to adapt to the physiologic growth of an extremely preterm neonate over a 4-week period. We regard this as an important step in the development of this bridge-to-life technology.

Novel hybrid rigid-deformable fetal modeling for simulating the vaginal delivery within the second stage of labor

BACKGROUND AND OBJECTIVE

The fetal representation as a 3D articulated body plays an essential role to describe a realistic vaginal delivery simulation. However, the current computational solutions have been oversimplified. The objective of the present work was to develop and evaluate a novel hybrid rigid-deformable modeling approach for the fetal body and then simulate its interaction with surrounding fetal soft tissues and with other maternal pelvis soft tissues during the second stage of labor.

METHODS

CT scan data was used for 3D fetal skeleton reconstruction. Then, a novel hybrid rigid-deformable model of the fetal body was developed. This model was integrated into a maternal 3D pelvis model to simulate the vaginal delivery. Soft tissue deformation was simulated using our novel HyperMSM formulation. Magnetic resonance imaging during the second stage of labor was used to impose the trajectory of the fetus during the delivery.

RESULTS

Our hybrid rigid-deformable fetal model showed a potential capacity for simulating the movements of the fetus along with the deformation of the fetal soft tissues during the vaginal delivery. The deformation energy density observed in the simulation for the fetal head fell within the strain range of 3 % to 5 %, which is in good agreement with the literature data.

CONCLUSIONS

This study developed, for the first time, a hybrid rigid-deformation modeling of the fetal body and then performed a vaginal delivery simulation using MRI-driven kinematic data. This opens new avenues for describing more realistic behavior of the fetal body kinematics and deformation during the second stage of labor. As perspectives, the integration of the full skeleton body, especially the upper and lower limbs will be investigated. Then, the completed model will be integrated into our developed next-generation childbirth training simulator for vaginal delivery simulation and associated complication scenarios.

Made to move: A review of measurement strategies to characterize heterogeneity in normal fetal movement

Fetal movement is a crucial indicator of fetal well-being. Characteristics of fetal movement vary across gestation, posing challenges for researchers to determine the most suitable assessment of fetal movement for their study. We summarize the current measurement strategies used to assess fetal movement and conduct a comprehensive review of studies utilizing these methods. We critically evaluate various measurement approaches including subjective maternal perception, ultrasound, Doppler ultrasound, wearable technology, magnetocardiograms, and magnetic resonance imaging, highlighting their strengths and weaknesses. We discuss the challenges of accurately capturing fetal movement, which is influenced by factors such as differences in recording times, gestational ages, sample sizes, environmental conditions, subjective perceptions, and characterization across studies. We also highlight the clinical implications of heterogeneity in fetal movement assessment for monitoring fetal behavior, predicting adverse outcomes, and improving maternal attachment to the fetus. Lastly, we propose potential areas of future research to overcome the current gaps and challenges in measuring and characterizing abnormal fetal movement. Our review contributes to the growing body of literature on fetal movement assessment and provides insights into the methodological considerations and potential applications for research.

The Lower Limb Movements of the Fetus in Uterus: A Narrative Review

The fetus movements play an important role in fetal well-being. With the continuous advancement of real-time scanning machines, it is feasible to observe the fetus movement in detail. The characteristics of fetal lower limb movements in prenatal examination have not been systematically investigated. This review proposes the patterns of fetal lower limb movements, the maternal influence on fetal lower limb movements, and the application of fetal lower limb movements for the diagnosis of prenatal diseases. A systematic search of literature on the lower limb movements of the fetus in uterus was performed in the databases, namely, Web of Science and Scopus. Thirty-four publications were selected. This review demonstrates that isolated fetal lower limb movements are rare and always accompanied with the movements of other body segments. Detection of the presence of fetal leg movements seems to be of no diagnostic value for fetuses with prenatal diseases. The isolated lower limb movement was statistically significant different between fetuses of low- and high-risk pregnant women. The coordinated movements of the fetal lower limbs and other parts should be considered when analyzing fetal movements in the future study.

Endostructural and periosteal growth of the human humerus

The growth and development of long bones are of considerable interests in the fields of comparative anatomy and palaeoanthropology, as evolutionary changes and adaptations to specific physical activity patterns are expected to be revealed during bone ontogeny. Traditionally, the cross-sectional geometry of long bones has been examined at discrete locations usually placed at set intervals or fixed percentage distances along the midline axis of the bone shaft. More recently, the technique of morphometric mapping has enabled the continuous analysis of shape variation along the shaft. Here we extend this technique to the full sequence of late fetal and postnatal development of the humeral shaft in a modern human population sample, with the aim of establishing the shape changes during growth and their relationship with the development of the arm musculature and activity patterns. A sample of modern human humeri from individuals of age ranging from 24 weeks in utero to 18 years was imaged using microtomography at multiple resolutions and custom Matlab scripts. Standard biomechanical properties, cortical thickness, surface curvature, and pseudo-landmarks were extracted along radial vectors spaced at intervals of 1° at each 0.5% longitudinal increment measured along the shaft axis. Heat maps were also generated for cortical thickness and surface curvature. The results demonstrate that a whole bone approach to analysis of cross-sectional geometry is more desirable where possible, as there is a continuous pattern of variation along the shaft. It is also possible to discriminate very young individuals and adolescents from other groups by relative cortical thickness, and also by periosteal surface curvature.

Fetal Fascial Reinforcement Development: From "a White Tablet" to a Sculpted Precise Organization by Movement

Simple Summary

Nowadays, the number of studies concerning fasciae is increasing, but few studies focus on fetal fasciae development and there is no study on the retinacula. The latter are fascial reinforcements with a crucial role in proprioception and coordination. We aimed to identify their structural organization by qualitative and quantitative assessments, to establish their role in myofascial development, highlighting their appearance and organization. Our data strongly suggest that the movement models the fascial reinforcements, structuring the fascial system, particularly at the end of the pregnancy.

Abstract

Fasciae have received much attention in recent years due to their important role in proprioception and muscular force transmission, but few studies have focused on fetal fasciae development and there is no study on the retinacula. The latter are fascial reinforcements that play a key role in proprioception and motor coordination. Furthermore, it is still unclear if they are genetically determined or if they are defined by movements, and if they are present during gestation or if they appear only later in the childhood. We aim to identify their structural organization by qualitative and quantitative assessments to establish their role the myofascial development, highlighting their appearance and organization. Samples from the wrist retinacula, posterior forearm, ankle retinacula, anterior leg, iliotibial tract and anterior thigh of six fetus body donors (from 24th to 40th week of gestation) and histological sections were obtained and a gross anatomy dissection was performed. Sections were stained with hematoxylin-eosin to observe their overall structure and measure their thicknesses. Using Weigert Van Gieson, Alcian blue and immunostaining to detect Hyaluronic Acid Binding Protein (HABP), Collagens I and III (Col I and III) were realized to assess the presence of elastic fibers and hyaluronan. This study confirms that the deep fasciae initially do not have organized layers and it is not possible to highlight any reinforcement. The fascial development is different according to the various area: while the deep fascia and the iliotibial tract is already evident by the 27th week, the retinacula begin to be defined only at the end of pregnancy, and their complete maturation will probably be reached only after birth. These findings suggest that the movement models the retinacula, structuring the fascial system, in particular at the end of pregnancy and in the first months of life. The fasciae can be imagined, initially, as “white tablets” composed of few elastic fibers, abundant collagens and HA, on which various forces, u movements, loads and gravity, “write their history”.

Challenges in Kinetic-Kinematic Driven Musculoskeletal Subject-Specific Infant Modeling

Musculoskeletal computational models provide a non-invasive approach to investigate human movement biomechanics. These models could be particularly useful for pediatric applications where in vivo and in vitro biomechanical parameters are difficult or impossible to examine using physical experiments alone. The objective was to develop a novel musculoskeletal subject-specific infant model to investigate hip joint biomechanics during cyclic leg movements. Experimental motion-capture marker data of a supine-lying 2-month-old infant were placed on a generic GAIT 2392 OpenSim model. After scaling the model using body segment anthropometric measurements and joint center locations, inverse kinematics and dynamics were used to estimate hip ranges of motion and moments. For the left hip, a maximum moment of 0.975 Nm and a minimum joint moment of 0.031 Nm were estimated at 34.6° and 65.5° of flexion, respectively. For the right hip, a maximum moment of 0.906 Nm and a minimum joint moment of 0.265 Nm were estimated at 23.4° and 66.5° of flexion, respectively. Results showed agreement with reported values from the literature. Further model refinements and validations are needed to develop and establish a normative infant dataset, which will be particularly important when investigating the movement of infants with pathologies such as developmental dysplasia of the hip. This research represents the first step in the longitudinal development of a model that will critically contribute to our understanding of infant growth and development during the first year of life.

Computation of Fetal Kicking in Various Fetal Health Examinations: A Systematic Review

Fetal movement has always been considered an essential indicator to evaluate the health of the unborn fetus. Many factors affect fetal movement. The frequency of fetal kicking is an important measurement of whether fetal development is progressing and healthy. Various instruments and methods of detecting fetal movement have been used and each method has its advantages and disadvantages. Although limited by the fetal environment in utero, the finite element method and musculoskeletal model can be used to calculate fetal lower limb movement. This review aims to summarize the current detection techniques for fetal movement, especially in the lower limbs. These will be outlined by describing the different measurements of fetal movement, and the related biomechanical analyses of fetal lower limb skeletogenesis and the associated muscular development to better evaluate and calculate the movements of the fetus in the womb.

Investigating the Effects of Different Sizes of Silicone Rubber Vacuum Extractors during the Course of Delivery on the Fetal Head: A Finite Element Analysis Study

During certain clinical situations, some parturients require instruments for operative vaginal delivery, and various designs of vacuum extractors may affect the fetal head. To investigate the biomechanical effects of divergent sizes of silicone rubber vacuum extractors, we employed finite element analysis in this study. First, we constructed computer models for different vacuum extractor sizes (diameters: 40 mm, 50 mm, 60 mm, and 70 mm), flat surface, hemispherical ball, and fetal head shape. A hemispherical ball was the main design for the vacuum extractor model, and the material used for the vacuum extractor was silicone rubber. Next, the settings of 1 mm vacuum extractor displacement and vacuum cap pressure of 60 cmHg were applied. The main observation markers of this study were the respective von Mises stresses on the vacuum extractor and skull by the reaction force on the fixed end. The concluded results revealed that vacuum extractors with larger diameters lead to greater reaction force, stress, and strain on fetal heads. Therefore, this study's biomechanical analytic consequences suggest that clinicians avoid selecting larger vacuum extractors during operative instrumental delivery so that fetal heads will experience less external force, deformation, and resultant complications. It could also provide a practical reference for obstetricians for instrumental vaginal delivery with the vacuum extractor made of silicone rubber.

Outcomes into adulthood of infants born extremely preterm

As survival of infants born extremely preterm increases, more are now reaching adulthood. It is well documented that survivors born extremely preterm experience more developmental delay and disability in multiple domains compared with term-born controls in early childhood and school age. However, with increasing age, health problems involving physical and mental health become more evident. Despite these challenges, it is reassuring that self-reported quality of life remains good. Future directions of research include development of age-appropriate interventions to optimise health and development of individuals born extremely preterm beyond school age.

Kinematic Comparison on Lower Limb Kicking Action of Fetuses in Different Gestational Weeks: A Pilot Study

The fetal movements during different gestational weeks are essential for normal musculoskeletal development. The kinematic characteristics of fetuses with small differences in gestational weeks may be different and important. Ultrasonographic videos of fetal kicking action and plantarflexion action were collected from three healthy pregnant women (24, 27, and 30 gestational weeks) with normal fetal development. The kinematic characteristics, including angular range and angular velocity, were analyzed. These kinematic parameters were measured using simi motion. The final knee angle was found to decrease with progressive gestational weeks. Compared with 24 w, the knee joint angle at 27 w and 30 w was significantly reduced at the end of a kick-type movement (p < 0.01). Except for the mean angular velocity of the knee joint, there were no significant differences in the other conditions. The value at 30 w for mean angular velocity was significantly higher than that at 24 w (p = 0.02). In the ankle joint, no significant differences were observed between different conditions. Therefore, we can conclude that there was no significant difference in the kinematic characteristics of the ankle joint for small gestational age gaps, but there was a significant difference in the knee joint. As the gestation weeks increase, the range of kicking motion tends to decrease. The reason may be that with the increase of gestational weeks, fetal lower limb musculoskeletal development is gradually enhanced; the slower growth rate indicates that development reaches a peak level in weeks 24 to 30.

Estimation of forces on anterior cruciate ligament in dynamic activities

In this work, a nonlinear strain rate dependent plugin developed for the OpenSim® platform was used to estimate the instantaneous strain rate (ISR) and the forces on the ACL's anteromedial (aACL) and posterolateral (pACL) bundles during walking and sudden change of direction of running termed as 'plant-and-cut' (PC). The authors obtained the kinematics data for walking via optical motion capture. PC movements, along with running kinematics, were obtained from the literature. A nonlinear plugin developed for ligaments was interfaced with OpenSim® platform to simulate walking and PC motions with a flexed knee and an extended knee. PC phase is sandwiched between an approach phase and take-off phase and was studied at various event velocities (1.8, 3, and 4.2 m s^-1), and angles of PC (23°, 34°, and 45°) as encountered in adult ball games. In both cases of PC-with-extended knee and PC-with-flexed-knee, the maximum forces on both the ACL bundles were observed after the take-off phase. A maximum force of ~ 35 N kg^-1 of body weight (BW) was observed on aACL after the take-off phase for an event velocity of 4.2 m s^-1. In the posterolateral bundle (pACL), the maximum forces (~ 40 N kg^-1 of BW) were observed towards the end of the mid-swing phase (after the take-off phase) for the various combinations of the parameters studied. The forces observed in the simulation of PC-with-flexed-knee and PC-with-extended-knee has resulted in magnitude higher than sustainable by the adults. This study is novel in attempting to incorporate differing rates-of-strain that have been shown to alter soft tissue properties into the OpenSim® musculoskeletal model. The proposed model can be used by researchers to predict the forces during various kinematic activities for other soft tissues.

Joint development recovery on resumption of embryonic movement following paralysis

Fetal activity in utero is a normal part of pregnancy and reduced or absent movement can lead to long-term skeletal defects, such as Fetal Akinesia Deformation Sequence, joint dysplasia and arthrogryposis. A variety of animal models with decreased or absent embryonic movements show a consistent set of developmental defects, providing insight into the aetiology of congenital skeletal abnormalities. At developing joints, defects include reduced joint interzones with frequent fusion of cartilaginous skeletal rudiments across the joint. At the spine, defects include shortening and a spectrum of curvature deformations. An important question, with relevance to possible therapeutic interventions for human conditions, is the capacity for recovery with resumption of movement following short-term immobilisation. Here, we use the well-established chick model to compare the effects of sustained immobilisation from embryonic day (E)4-10 to two different recovery scenarios: (1) natural recovery from E6 until E10 and (2) the addition of hyperactive movement stimulation during the recovery period. We demonstrate partial recovery of movement and partial recovery of joint development under both recovery conditions, but no improvement in spine defects. The joints examined (elbow, hip and knee) showed better recovery in hindlimb than forelimb, with hyperactive mobility leading to greater recovery in the knee and hip. The hip joint showed the best recovery with improved rudiment separation, tissue organisation and commencement of cavitation. This work demonstrates that movement post paralysis can partially recover specific aspects of joint development, which could inform therapeutic approaches to ameliorate the effects of human fetal immobility. This article has an associated First Person interview with the first author of the paper.

Magnetic resonance imaging of the fetal musculoskeletal system

Diagnosing musculoskeletal pathology requires understanding of the normal embryological development. Intrinsic errors of skeletal development are individually rare but are of paramount clinical importance because anomalies can greatly impact patients' lives. An accurate assessment of the fetal musculoskeletal system must be performed to provide optimal genetic counseling as well as to drive therapeutic management. This manuscript reviews the embryology of skeletal development and the appearance of the maturing musculoskeletal system on fetal MRI. In addition, it presents a comprehensive review of musculoskeletal fetal pathology along with postnatal imaging.

Deep Predictive Motion Tracking in Magnetic Resonance Imaging: Application to Fetal Imaging

Fetal magnetic resonance imaging (MRI) is challenged by uncontrollable, large, and irregular fetal movements. It is, therefore, performed through visual monitoring of fetal motion and repeated acquisitions to ensure diagnostic-quality images are acquired. Nevertheless, visual monitoring of fetal motion based on displayed slices, and navigation at the level of stacks-of-slices is inefficient. The current process is highly operator-dependent, increases scanner usage and cost, and significantly increases the length of fetal MRI scans which makes them hard to tolerate for pregnant women. To help build automatic MRI motion tracking and navigation systems to overcome the limitations of the current process and improve fetal imaging, we have developed a new real-time image-based motion tracking method based on deep learning that learns to predict fetal motion directly from acquired images. Our method is based on a recurrent neural network, composed of spatial and temporal encoder-decoders, that infers motion parameters from anatomical features extracted from sequences of acquired slices. We compared our trained network on held-out test sets (including data with different characteristics, e.g. different fetuses scanned at different ages, and motion trajectories recorded from volunteer subjects) with networks designed for estimation as well as methods adopted to make predictions. The results show that our method outperformed alternative techniques, and achieved real-time performance with average errors of 3.5 and 8 degrees for the estimation and prediction tasks, respectively. Our real-time deep predictive motion tracking technique can be used to assess fetal movements, to guide slice acquisitions, and to build navigation systems for fetal MRI.

Subsynovial connective tissue development in the rabbit carpal tunnel

The carpal tunnel contains the digital flexor tendons and the median nerve, which are embedded in a unique network of fibrovascular interconnected subsynovial connective tissue (SSCT). Fibrous hypertrophy of the SSCT and subsequent adaptations in mechanical response are found in patients with carpal tunnel syndrome (CTS), but not much is known about the development of the SSCT. This observational study describes the morphological development of SSCT using histology and ultramicroscopy in an animal model at four time points between late-term fetuses through adulthood. A transition is seen between 3 days and 6 weeks post-partum from a dense solid SSCT matrix to a complex multilayered structure connected with collagenous fibrils. These preliminary data show a developmental pattern that matches an adaptive response of the SSCT to loading and motion. Understanding the anatomical development aids in recognizing the pathophysiology of CTS and supports research on new therapeutic approaches.

A Novel Fetal Movement Simulator for the Performance Evaluation of Vibration Sensors for Wearable Fetal Movement Monitors

Fetal movements (FM) are an important factor in the assessment of fetal health. However, there is currently no reliable way to monitor FM outside clinical environs. While extensive research has been carried out using accelerometer-based systems to monitor FM, the desired accuracy of detection is yet to be achieved. A major challenge has been the difficulty of testing and calibrating sensors at the pre-clinical stage. Little is known about fetal movement features, and clinical trials involving pregnant women can be expensive and ethically stringent. To address these issues, we introduce a novel FM simulator, which can be used to test responses of sensor arrays in a laboratory environment. The design uses a silicon-based membrane with material properties similar to that of a gravid abdomen to mimic the vibrations due to fetal kicks. The simulator incorporates mechanisms to pre-stretch the membrane and to produce kicks similar to that of a fetus. As a case study, we present results from a comparative study of an acoustic sensor, an accelerometer, and a piezoelectric diaphragm as candidate vibration sensors for a wearable FM monitor. We find that the acoustic sensor and the piezoelectric diaphragm are better equipped than the accelerometer to determine durations, intensities, and locations of kicks, as they have a significantly greater response to changes in these conditions than the accelerometer. Additionally, we demonstrate that the acoustic sensor and the piezoelectric diaphragm can detect weaker fetal movements (threshold wall displacements are less than 0.5 mm) compared to the accelerometer (threshold wall displacement is 1.5 mm) with a trade-off of higher power signal artefacts. Finally, we find that the piezoelectric diaphragm produces better signal-to-noise ratios compared to the other two sensors in most of the cases, making it a promising new candidate sensor for wearable FM monitors. We believe that the FM simulator represents a key development towards enabling the eventual translation of wearable FM monitoring garments.

Uterus Modeling from Cell to Organ Level: towards Better Understanding of Physiological Basis of Uterine Activity

The relatively limited understanding of the physiology of uterine activation prevents us from achieving optimal clinical outcomes for managing serious pregnancy disorders such as preterm birth or uterine dystocia. There is increasing awareness that multi-scale computational modeling of the uterus is a promising approach for providing a qualitative and quantitative description of uterine physiology. The overarching objective of such approach is to coalesce previously fragmentary information into a predictive and testable model of uterine activity that, in turn, informs the development of new diagnostic and therapeutic approaches to these pressing clinical problems. This article assesses current progress towards this goal. We summarize the electrophysiological basis of uterine activation as presently understood and review recent research approaches to uterine modeling at different scales from single cell to tissue, whole organ and organism with particular focus on transformative data in the last decade. We describe the positives and limitations of these approaches, thereby identifying key gaps in our knowledge on which to focus, in parallel, future computational and biological research efforts.

Effect of umbilical cord length on early fetal biomechanics

The umbilical cord suspends the fetus within the amniotic cavity, where fetal dynamics is one of its many functions. Hence, the umbilical cord is a viable index in determining fetal activity. Fetal movements result in mechanical loads that are fundamental for fetal growth. At present, mechanical environment during early human fetal development is still largely unknown. To determine early fetal movement dynamics at given physiological (0.060 m) and pathological umbilical cord lengths (0.030 m, 0.020 m, 0.017 m and 0.014 m) a 2D computational model was created to simulate dynamic movement conditions. Main findings of this computational model revealed the shortest umbilical cord length (0.014 m) with a 6(10-6)N, twitch force amplitude had a two-fold increase on linear velocity (0.12 m/s) in comparison with other lengths (0.05m/s). Moreover, umbilical cord length effect presented an increasing exponential tension on the fetus body wall from longest to shortest, from 0 N in the control length to 0.05 N for the shortest umbilical cord. Last, tension was always present over a period of time for the shortest cord (0.03 N to 0.08 N). Collectively, for all variables evaluated the shortest umbilical cord (0.014 m) presented remarkable differences with other lengths in particular with the second shortest umbilical cord (0.017 m), suggesting a 0.003 m difference represents a greater biomechanical effect. In conclusion, this computational model brings new insights required by clinicians, where the magnitude of these loads could be associated with different pathologies found in the clinic.

Recapitulating bone development through engineered mesenchymal condensations and mechanical cues for tissue regeneration

Large bone defects cannot form a callus and exhibit high complication rates even with the best treatment strategies available. Tissue engineering approaches often use scaffolds designed to match the properties of mature bone. However, natural fracture healing is most efficient when it recapitulates development, forming bone via a cartilage intermediate (endochondral ossification). Because mechanical forces are critical for proper endochondral bone development and fracture repair, we hypothesized that recapitulating developmental mechanical forces would be essential for large bone defect regeneration in rats. Here, we engineered mesenchymal condensations that mimic the cellular organization and lineage progression of the early limb bud in response to local transforming growth factor-β1 presentation from incorporated gelatin microspheres. We then controlled mechanical loading in vivo by dynamically tuning fixator compliance. Mechanical loading enhanced mesenchymal condensation-induced endochondral bone formation in vivo, restoring functional bone properties when load initiation was delayed to week 4 after defect formation. Live cell transplantation produced zonal human cartilage and primary spongiosa mimetic of the native growth plate, whereas condensation devitalization before transplantation abrogated bone formation. Mechanical loading induced regeneration comparable to high-dose bone morphogenetic protein-2 delivery, but without heterotopic bone formation and with order-of-magnitude greater mechanosensitivity. In vitro, mechanical loading promoted chondrogenesis and up-regulated pericellular matrix deposition and angiogenic gene expression. In vivo, mechanical loading regulated cartilage formation and neovascular invasion, dependent on load timing. This study establishes mechanical cues as key regulators of endochondral bone defect regeneration and provides a paradigm for recapitulating developmental programs for tissue engineering.

Fetal arthrogryposis: Challenges and perspectives for prenatal detection and management

Antenatal identification of fetuses with multiple congenital contractures or arthrogryposis multiplex congenita (AMC) may be challenging. The first clinical sign is often reduced fetal movement and/or contractures, as seen on prenatal ultrasounds. This can be apparent at any point, from early to late pregnancy, may range from mild to severe involvement, with or without associated other structural anomalies. Possible etiologies and their prognosis need to be interpreted with respect to developmental timing. The etiology of AMC is highly heterogeneous and making the specific diagnosis will guide prognosis, counseling and prenatal and perinatal management. Current ultrasound practice identifies only approximately 25% of individuals with arthrogryposis prenatally before 24 weeks of pregnancy in a general obstetrics care population. There are currently no studies and guidelines that address the question of when and how to assess for fetal contractures and movements during pregnancy. The failure to identify fetuses with arthrogryposis before 24 weeks of pregnancy means that physicians and families are denied reproductive options and interventions that may improve outcome. We review current practice and recommend adjusting the current prenatal imaging and genetic diagnostic strategies to achieve early prenatal detection and etiologic diagnosis. We suggest exploring options for in utero therapy to increase fetal movement for ongoing pregnancies.

Stresses and strains on the human fetal skeleton during development

Mechanical forces generated by fetal kicks and movements result in stimulation of the fetal skeleton in the form of stress and strain. This stimulation is known to be critical for prenatal musculoskeletal development; indeed, abnormal or absent movements have been implicated in multiple congenital disorders. However, the mechanical stress and strain experienced by the developing human skeleton in utero have never before been characterized. Here, we quantify the biomechanics of fetal movements during the second half of gestation by modelling fetal movements captured using novel cine-magnetic resonance imaging technology. By tracking these movements, quantifying fetal kick and muscle forces, and applying them to three-dimensional geometries of the fetal skeleton, we test the hypothesis that stress and strain change over ontogeny. We find that fetal kick force increases significantly from 20 to 30 weeks' gestation, before decreasing towards term. However, stress and strain in the fetal skeleton rises significantly over the latter half of gestation. This increasing trend with gestational age is important because changes in fetal movement patterns in late pregnancy have been linked to poor fetal outcomes and musculoskeletal malformations. This research represents the first quantification of kick force and mechanical stress and strain due to fetal movements in the human skeleton in utero, thus advancing our understanding of the biomechanical environment of the uterus. Further, by revealing a potential link between fetal biomechanics and skeletal malformations, our work will stimulate future research in tissue engineering and mechanobiology.

Quantitative anatomy of the ulna's shaft primary ossification center in the human fetus

PURPOSE

There has been little information in the medical literature regarding the growing ulna in the human fetus, though such knowledge appears to be potentially useful in diagnosing skeletal dysplasias, characterized by a disrupted or completely halted growth of the fetus. Therefore, longitudinal measurements of long bones are extremely conducive in assessing both pregnancy and fetal anatomy.

MATERIALS AND METHODS

Using methods of CT, digital-image analysis and statistics, the size of the ulna's shaft primary ossification center in 48 (26 males and 22 females) spontaneously aborted human fetuses aged 17-30 weeks was studied.

RESULTS

With no sex differences, the best fit growth dynamics for the ulna's shaft primary ossification center was modeled by the following functions: y = - 8.476 + 1.561 × age ± 0.019 for its length, y = - 2.961 + 0.278 × age ± 0.016 for its proximal transverse diameter, y = - 0.587 + 0.107 × age ± 0.027 for its middle transverse diameter, y = - 2.865 + 0.226 × age ± 0.295 for its distal transverse diameter, y = - 50.758 + 0.251 × (age)2 ± 0.016 for its projection surface area, and y = - 821.707 + 52.578 × age ± 0.018 ± 102.944 for its volume.

CONCLUSIONS

The morphometric characteristics of the ulna's shaft primary ossification center show neither sex nor bilateral differences. The ulna's shaft primary ossification center grows linearly with respect to its length, transverse dimensions and volume, and follows a quadratic function with respect to its projection surface area. The obtained morphometric data of the ulna's shaft primary ossification center is considered normative for respective prenatal weeks and may be of relevance in both the estimation of fetal ages and the diagnostic process of congenital defects.

Structure-function relationships of fetal ovine articular cartilage

It is crucial that the properties of engineered neocartilage match healthy native cartilage to promote the functional restoration of damaged cartilage. To accurately assess the quality of neocartilage and the degree of biomimicry achieved, its properties must be evaluated against native cartilage and tissue from which the cells for neocartilage formation were sourced. Fetal ovine cartilage is a promising and translationally relevant cell source with which to engineer neocartilage, yet, it is largely non-characterized. The influence of biomechanics during cartilage development, as well as their potential impact on structure-function relationships in utero motivates additional study of fetal cartilage. Toward providing tissue engineering design criteria and elucidating structure-function relationships, 11 locations across four regions of the fetal ovine stifle were characterized. Locational and regional differences were found to exist. Although differences in GAG content were observed, compressive stiffness did not vary or correlate with any biochemical component. Patellar cartilage tensile stiffness and strength were significantly greater than those of the medial condyle. Tensile modulus and UTS significantly correlated with pyridinoline content. More advanced zonal organization, more intense collagen II staining, and greater collagen and pyridinoline contents in the trochlear groove and patella suggest these regions exhibit a more advanced maturational state than others. Regional differences in functional properties and their correlations suggest that structure-function relationships emerge in utero. These data address the dearth of information of the fetal ovine stifle, may serve as a repository of information for cartilage engineering strategies, and may help elucidate functional adaptation in fetal articular cartilage. STATEMENT OF SIGNIFICANCE: Engineered neocartilage must be evaluated against healthy native cartilage and cell source tissue to determine its quality and degree of biomimicry. While fetal ovine cartilage has emerged as a promising and translationally relevant cell source with which to engineer neocartilage, it is largely non-characterized. Therefore, 11 locations across four regions (medial condyle, lateral condyle, trochlear groove, and patella) of the fetal ovine stifle were characterized. Importantly, locational and regional differences in functional properties were observed, and significant correlations of tensile properties to collagen and crosslink contents were detected, suggesting that functional adaptation begins in utero. This study provides a repository of quantitative information, clarifies the developmental order of cartilage functional properties, and informs future cartilage engineering efforts.

Morphometric study of the primary ossification center of the fibular shaft in the human fetus

PURPOSES

Precise morphometric data on the development of ossification centers in human fetuses may be useful in the early detection of skeletal dysplasias associated with delayed ossification center development and mineralization. The present study was performed to quantitatively examine the primary ossification center of the fibular shaft with respect to its linear, planar and volumetric parameters.

MATERIALS AND METHODS

Using methods of CT, digital-image analysis (Osirix 3.9 MD) and statistics (Student's t-test, Shapiro-Wilk, Fisher's test, Tukey's test, Kruskal-Wallis test, regression analysis), the size of the primary ossification center of the fibular shaft in 47 spontaneously aborted human fetuses (25 ♂ and 22 ♀) aged 17-30 weeks was studied. In each fetus, the assessment of linear dimensions (length, transverse diameters for: proximal end, middle part and distal end), projection surface area and volume of the fibular shaft ossification center was carried out.

RESULTS

With no sex and laterality differences, the best fit growth dynamics for the primary ossification center of the fibular shaft was modelled by the following functions: y = - 13.241 + 1.567 × age ± 1.556 (R2 = 0.94) for its length, y = - 0.091 + 0.063 × age ± 0.073 (R2 = 0.92) for its proximal transverse diameter, y = - 1.201 + 0.717 × ln(age) ± 0.054 (R2 = 0.83) for its middle transverse diameter, y = - 2.956 + 1.532 × ln(age) ± 0.090 (R2 = 0.89) for its distal transverse diameter, y = - 69.038 + 4.699 × age ± 4.055 (R2 = 0.95) for its projection surface area, and y = - 126.374 + 9.462 × age ± 8.845 (R2 = 0.94) for its volume.

CONCLUSIONS

The ossification center in the fibular shaft follows linear functions with respect to its length, proximal transverse diameter, projection surface area and volume, and natural logarithmic functions with respect to its middle and distal transverse diameters. The obtained morphometric data of the fibular shaft ossification center is considered normative for their respective prenatal weeks and may be of relevance in both the estimation of fetal age and the ultrasound diagnostics of congenital defects.

Three-dimensional growth of tibial shaft ossification in the human fetus: a digital-image and statistical analysis

PURPOSES

Tibial shaft ossification in terms of its size and growth may be criticalin describing both the fetal stage and maturity, and in identifying innate disorders. The present study was executed to quantitatively assess ossification of the tibial shaft, taking its morphometric linear, planar and volumetric parameters into account.

MATERIALS AND METHODS

With the use of methods of CT, digital-image analysis and statistics, the evolutionof tibial shaft ossification in 47 spontaneously aborted human fetuses at the age of 17-30 weeks was studied.

RESULTS

Without any male-female and right-left morphometric differences, the best fit growth dynamics fortibial shaft ossification was modelled by the following functions: y = 5.312 + 0.034 × (age)² ± 0.001 (R² = 0.89) for its length, y = - 2.855 + 0.307 × age ± 0.009 (R² = 0.96) for its proximal transverse diameter, y = - 0.758 + 0.153 × age ± 0.005 (R² = 0.88) for its middle transverse diameter, y = - 1.844 + 0.272 × age ± 0.09 (R² = 0.90) for its distal transverse diameter, y = - 40.263 + 0.258 × (age)² ± 0.007 (R² = 0.94) for its projection surface area, and y = - 287.996 + 1.186 × (age)² ± 0.037 (R² = 0.92) for its volume. The femoral-to-tibial ossification length ratio was 1.15 ± 0.1.

CONCLUSIONS

The size of tibial shaft ossification displays neither sex nor laterality differences. Tibial shaft ossification follows quadratic functions with respect to its length, projection surface area and volume, and linear functions with respect to its proximal, middle and distal transverse diameters. The obtained morphometric data of tibial shaft ossification are considered normative age-specific references of relevance in both the estimation of fetal ages and the ultrasound diagnostics of congenital defects.

Altered biomechanical stimulation of the developing hip joint in presence of hip dysplasia risk factors

Fetal kicking and movements generate biomechanical stimulation in the fetal skeleton, which is important for prenatal musculoskeletal development, particularly joint shape. Developmental dysplasia of the hip (DDH) is the most common joint shape abnormality at birth, with many risk factors for the condition being associated with restricted fetal movement. In this study, we investigate the biomechanics of fetal movements in such situations, namely fetal breech position, oligohydramnios and primiparity (firstborn pregnancy). We also investigate twin pregnancies, which are not at greater risk of DDH incidence, despite the more restricted intra-uterine environment. We track fetal movements for each of these situations using cine-MRI technology, quantify the kick and muscle forces, and characterise the resulting stress and strain in the hip joint, testing the hypothesis that altered biomechanical stimuli may explain the link between certain intra-uterine conditions and risk of DDH. Kick force, stress and strain were found to be significantly lower in cases of breech position and oligohydramnios. Similarly, firstborn fetuses were found to generate significantly lower kick forces than non-firstborns. Interestingly, no significant difference was observed in twins compared to singletons. This research represents the first evidence of a link between the biomechanics of fetal movements and the risk of DDH, potentially informing the development of future preventative measures and enhanced diagnosis. Our results emphasise the importance of ultrasound screening for breech position and oligohydramnios, particularly later in pregnancy, and suggest that earlier intervention to correct breech position through external cephalic version could reduce the risk of hip dysplasia.

Movement and joints: effects of overuse on anuran knee tissues

Movement plays a main role in the correct development of joint tissues. In tetrapods, changes in normal movements produce alterations of such tissues during the ontogeny and in adult stages. The knee-joint is ideal for observing the influence of movement disorders, due to biomechanical properties of its components, which are involved in load transmission. We analyze the reaction of knee tissues under extreme exercise in juveniles and adults of five species of anurans with different locomotor modes. We use anurans as the case study because they undergo great mechanical stress during locomotion. We predicted that (a) knee tissues subjected to overuse will suffer a structural disorganization process; (b) adults will experience deeper morphological changes than juveniles; and (c) morphological changes will be higher in jumpers compared to walkers. To address these questions, we stimulated specimens on a treadmill belt during 2 months. We performed histological analyses of the knee of both treated and control specimens. As we expected, overuse caused structural changes in knee tissues. These alterations were gradual and higher in adults, and similar between jumpers and walkers species. This study represents a first approach to the understanding of the dynamics of anuran knee tissues during the ontogeny, and in relation to locomotion. Interestingly, the alterations found were similar to those observed in anurans subjected to reduced mobility and also to those described in joint diseases (i.e., osteoarthritis and tendinosis) in mammals, suggesting that among tetrapods, changes in movement generate similar responses in the tissues involved.

Neuroimaging perspectives on fetal motor behavior

We are entering a new era of understanding human development with the ability to perform studies at the earliest time points possible. There is a substantial body of evidence to support the concept that early motor behaviour originates from supraspinal motor centres, reflects neurological integrity, and that altered patterns of behaviour precede clinical manifestation of disease. Cine Magnetic Resonance Imaging (cineMRI) has established its value as a novel method to visualise motor behaviour in the human fetus, building on the wealth of knowledge gleaned from ultrasound based studies. This paper presents a state of the art review incorporating findings from human and preclinical models, the insights from which, we propose, can proceed a reconceptualisation of fetal motor behaviour using advanced imaging techniques. Foremost is the need to better understand the role of the intrauterine environment, and its inherent unique set of stimuli that activate sensorimotor pathways and shape early brain development. Finally, an improved model of early motor development, combined with multimodal imaging, will provide a novel source of in utero biomarkers predictive of neurodevelopmental disorders.

Neurodevelopmental Correlates of Fetal Motor Behavior Assessed Using Cine MR Imaging

BACKGROUND AND PURPOSE

Fetal motor behavior is widely used as a clinical indicator for healthy development; however, our understanding of its potential as a marker for neurologic integrity is underdeveloped. MR imaging allows complete views of the whole fetus, which, combined with brain imaging, may improve the characterization of this relationship. This study aimed to combine an analysis of fetal motor behavior, brain MR imaging, and postnatal outcome, to provide insight into neurodevelopmental correlates of motor behavior.

MATERIALS AND METHODS

Cine MR imaging was used to acquire sequences of fetal motor behavior in subjects with normal and abnormal findings on conventional brain MR imaging between 18 weeks' gestation and term. General movement sequences were analyzed using established criteria. Brain MR imaging was reported by an expert fetal neuroradiologist. Subjects were followed for up to 4 years postnatally with standard postnatal assessments.

RESULTS

Nineteen of 21 fetuses with normal brain MR imaging findings showed normal general movements, compared with 14 of 22 of the fetuses with abnormal brain MR imaging findings, which, when classified by severity of the malformation, showed a significant relationship with postnatal outcome (P = .021). There was a significant relationship among neurodevelopmental outcome, general movement quality, and MR imaging of the brain (P = .020).

CONCLUSIONS

The findings from this study demonstrate that a combined structural and functional imaging approach to the fetus will improve the characterization of early neurologic integrity, with the potential to inform postnatal outcome. This also lays the groundwork for further in vivo research as advanced imaging techniques are developed to study fetal neurologic development.

Quantitative anatomy of the ilium's primary ossification center in the human fetus

Purpose

An understanding of the development of the ilium’s primary ossification center may be useful in both determining the fetal stage and maturity, and for detecting congenital disorders. This study was performed to quantitatively examine the ilium’s primary ossification center with respect to its linear, planar and volumetric parameters.

Materials and methods

Using methods of CT, digital-image analysis and statistics, the size of the ilium’s primary ossification center in 42 spontaneously aborted human fetuses of crown–rump length (CRL) ranged from 130 to 265 mm (aged 18–30 weeks) was studied.

Results

With no sex and laterality differences, the best fit growth dynamics for the ilium’s primary ossification center was modelled by the following functions: y = − 63.138 + 33.413 × ln(CRL) ± 1.609 for its vertical diameter, y = − 59.220 + 31.353 × ln(CRL) ± 1.736 for its transverse diameter, y = − 105.681 + 1.137 × CRL ± 16.035 for its projection surface area, and y = 478.588 + 4.035 × CRL ± 14.332 for its volume. The shape of the ilium’s primary ossification center did not change over the study period, because its transverse -to- vertical diameter ratio was stable at the level of 0.94 ± 0.07.

Conclusions

The size of the ilium’s primary ossification center displays neither sex nor laterality differences. The ilium’s primary ossification center grows logarithmically with respect to its vertical and transverse diameters, and linearly with respect to its projection surface area and volume. The shape of the ilium’s primary ossification center does not change throughout the examined period. The obtained quantitative data of the ilium’s primary ossification center is considered normative for respective prenatal weeks and may contribute to the prenatal ultrasound diagnostics of congenital defects.

Fetal Development of Fasciae around the Arm and Thigh Muscles: A Study Using Late Stage Fetuses

To obtain a better understanding of multi-laminar deep fascia covering skeletal muscles, we examined nondecalcified histological sections of the arm and thigh of 20 human fetuses aged 25-33 weeks. Morphologies of the fasciae varied between sites and specimens, but the initial morphology was most likely to be a thin and loose sheet on the external surface of the muscles (fascia-1 or F1). When the F1 became wavy, thick and tight, it was detached from the muscle surface. Beneath the F1, the second lamina of fascia (F2) appeared on the muscle surface and it was also detached. In this manner at 25-33 weeks' gestation, fasciae covering the triceps and vastus lateralis muscles had a three-layered configuration (F1, F2, and F3). Due to significant individual variations, this process was not correlated to the ages and sizes of specimens. Muscle contractions might facilitate the detachment. In these muscles, the intramuscular tendon joined the F2 or F3 and the latter became thick and aponeurotic. Along the finally developed lamina, muscle fibers carried a desmin-positive spot for insertion. Increased laminae were accompanied by a reduced number of CD68-positive macrophages and, nerves were absent, near the developing fascia. In contrast to skin ligaments or superficial fasciae showing de novo development in loose tissue, a deep or muscle-covering fascia seemed to originate from the skeletal muscle itself at the surface, and this process was repeated to produce multi-layered fascia. Depending on sites, collagen fibers were added by the intramuscular tendon. Anat Rec, 301:1235-1243, 2018. © 2018 Wiley Periodicals, Inc.

Extreme umbilical cord lengths, cord knot and entanglement: Risk factors and risk of adverse outcomes, a population-based study

Objectives

To determine risk factors for short and long umbilical cord, entanglement and knot. Explore their associated risks of adverse maternal and perinatal outcome, including risk of recurrence in a subsequent pregnancy. To provide population based gestational age and sex and parity specific reference ranges for cord length.

Design

Population based registry study.

Setting

Medical Birth Registry of Norway 1999–2013.

Population

All singleton births (gestational age>22weeks<45 weeks) (n = 856 300).

Methods

Descriptive statistics and odds ratios of risk factors for extreme cord length and adverse outcomes based on logistic regression adjusted for confounders.

Main outcome measures

Short or long cord (<10^th or >90^th percentile), cord knot and entanglement, adverse pregnancy outcomes including perinatal and intrauterine death.

Results

Increasing parity, maternal height and body mass index, and diabetes were associated with increased risk of a long cord. Large placental and birth weight, and fetal male sex were factors for a long cord, which again was associated with a doubled risk of intrauterine and perinatal death, and increased risk of adverse neonatal outcome. Anomalous cord insertion, female sex, and a small placenta were associated with a short cord, which was associated with increased risk of fetal malformations, placental complications, caesarean delivery, non-cephalic presentation, perinatal and intrauterine death. At term, cord knot was associated with a quadrupled risk of perinatal death. The combination of a cord knot and entanglement had a more than additive effect to the association to perinatal death. There was a more than doubled risk of recurrence of a long or short cord, knot and entanglement in a subsequent pregnancy of the same woman.

Conclusion

Cord length is influenced both by maternal and fetal factors, and there is increased risk of recurrence. Extreme cord length, entanglement and cord knot are associated with increased risk of adverse outcomes including perinatal death. We provide population based reference ranges for umbilical cord length.

Ontogeny of the Human Pelvis

The human pelvis has evolved over time into a remarkable structure, optimised into an intricate architecture that transfers the entire load of the upper body into the lower limbs, while also facilitating bipedal movement. The pelvic girdle is composed of two hip bones, os coxae, themselves each formed from the gradual fusion of the ischium, ilium and pubis bones. Unlike the development of the classical long bones, a complex timeline of events must occur in order for the pelvis to arise from the embryonic limb buds. An initial blastemal structure forms from the mesenchyme, with chondrification of this mass leading to the first recognisable elements of the pelvis. Primary ossification centres initiate in utero, followed post-natally by secondary ossification at a range of locations, with these processes not complete until adulthood. This cascade of events can vary between individuals, with recent evidence suggesting that fetal activity can affect the normal development of the pelvis. This review surveys the current literature on the ontogeny of the human pelvis. Anat Rec, 300:643-652, 2017. © 2017 Wiley Periodicals, Inc.

Reverse engineering development: Crosstalk opportunities between developmental biology and tissue engineering

The fields of developmental biology and tissue engineering have been revolutionized in recent years by technological advancements, expanded understanding, and biomaterials design, leading to the emerging paradigm of "developmental" or "biomimetic" tissue engineering. While developmental biology and tissue engineering have long overlapping histories, the fields have largely diverged in recent years at the same time that crosstalk opportunities for mutual benefit are more salient than ever. In this perspective article, we will use musculoskeletal development and tissue engineering as a platform on which to discuss these emerging crosstalk opportunities and will present our opinions on the bright future of these overlapping spheres of influence. The multicellular programs that control musculoskeletal development are rapidly becoming clarified, represented by shifting paradigms in our understanding of cellular function, identity, and lineage specification during development. Simultaneously, advancements in bioartificial matrices that replicate the biochemical, microstructural, and mechanical properties of developing tissues present new tools and approaches for recapitulating development in tissue engineering. Here, we introduce concepts and experimental approaches in musculoskeletal developmental biology and biomaterials design and discuss applications in tissue engineering as well as opportunities for tissue engineering approaches to inform our understanding of fundamental biology. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2356-2368, 2017.

Finite element analysis of mechanical behavior of human dysplastic hip joints: a systematic review

Developmental dysplasia of the hip (DDH) is a common condition predisposing to osteoarthritis (OA). Especially since DDH is best identified and treated in infancy before bones ossify, there is surprisingly a near-complete absence of literature examining mechanical behavior of infant dysplastic hips. We sought to identify current practice in finite element modeling (FEM) of DDH, to inform future modeling of infant dysplastic hips. We performed multi-database systematic review using PRISMA criteria. Abstracts (n = 126) fulfilling inclusion criteria were screened for methodological quality, and results were analyzed and summarized for eligible articles (n = 12). The majority of the studies modeled human adult dysplastic hips. Two studies focused on etiology of DDH through simulating mechanobiological growth of prenatal hips; we found no FEM-based studies in infants or children. Finite element models used either patient-specific geometry or idealized average geometry. Diversities in choice of material properties, boundary conditions, and loading scenarios were found in the finite-element models. FEM of adult dysplastic hips demonstrated generally smaller cartilage contact area in dysplastic hips than in normal joints. Contact pressure (CP) may be higher or lower in dysplastic hips depending on joint geometry and mechanical contribution of labrum (Lb). FEM of mechanobiological growth of prenatal hip joints revealed evidence for effects of the joint mechanical environment on formation of coxa valga, asymmetrically shallow acetabulum and malformed femoral head associated with DDH. Future modeling informed by the results of this review may yield valuable insights into optimal treatment of DDH, and into how and why OA develops early in DDH.