Antimicrobial silver: uses, toxicity and potential for resistance

In the search for new gold metalloantibiotics: In vitro evaluation of Au(III) (C^S)-cyclometallated complexes

A series of (C^S)-cyclometallated Au(III) cationic complexes of general formula [Au(dppta)(dtc)]+, [Au(dppta)(azmtd)]+ and [Au(dppta)(azc)Cl]+ (dppta = N,N-diisopropyl-P,P-diphenylphosphinothioic amide-κ2C,S; dtc = dithiocarbamate-κ2S,S'; azc = azolium-2-dithiocarboxylate-κ1S; azmdt = azol(in)ium-2-(methoxy)methanedithiol-κ2S,S') were synthetized and tested against a panel of bacterial strains belonging to different Gram-positive and Gram-negative species of the ESKAPE group of pathogens. Among the tested compounds, complex 4c had the higher Therapeutic Index (TI) against multidrug resistant strains of S. aureus, S. epidermidis and A. baumannii, showing a more favourable cytotoxicity profile than the reference gold metalloantibiotic Auranofin. © 2024 xxxxxxxx. Hosting by Elsevier B.V. All rights reserved.

Enhanced antibacterial efficacy: rapid analysis of silver-decorated azithromycin-infused Soluplus® nanoparticles against E. coli and S. epidermidis biofilms

The escalating threat of antibiotic-resistant bacterial biofilms necessitates innovative antimicrobial strategies. This study introduces silver-decorated azithromycin-infused Soluplus® nanoparticles (Ag-AZI-Sol NPs) synthesized via a controlled emulsion diffusion method to ensure sustained release of antimicrobial silver ions for over six hours-a critical factor for continuous antibacterial efficacy. The efficacy of these nanoparticles was evaluated against biofilms formed by Escherichia coli (E. coli) and Staphylococcus epidermidis (S. epidermidis), pathogens that cause hospital-acquired infections. Concentrations of 5 and 10 μg mL-1 of Ag-AZI-Sol NPs induced significant morphological changes within the biofilms, disrupting the bacterial extracellular matrix as observed using scanning electron microscopy (SEM). This disruption peaked between two and six hours, coinciding with damage to bacterial cells by the silver ions. Antibacterial assay measurements confirmed a significant reduction in the growth rate among the Ag-AZI-Sol NP-treated bacteria compared with controls. Electrochemical analysis using laser-induced graphene (LIG) and chronoamperometry revealed a decline in current, indicating an effective antibacterial effect. This innovative biosensing technique makes use of the high conductivity and surface area of LIG to detect changes in bacterial activity quickly and sensitively. Our findings highlight the potent microbicidal properties of Ag-AZI-Sol NPs and suggest diverse applications from food processing to medical device coatings.

Prevalence and molecular characteristics of intestinal pathogenic Escherichia coli isolated from diarrheal pigs in Southern China

Intestinal pathogenic Escherichia coli (InPEC) is one of the most common causes of bacterial diarrhea in farm animals, including profuse neonatal diarrhea and post weaning diarrhea (PWD) in piglets. In this study, we investigated the prevalence of InPEC and associated primary virulence factors among 543 non-duplicate E. coli isolates from diarrheal pigs from 15 swine farms in southern China. Six major virulence genes associated with InPEC were identified among 69 (12.71 %) E. coli isolates and included est (6.62 %), K88 (4.79 %), elt (3.68 %), eae (1.47 %), stx2 (0.92 %) and F18 (0.55 %). Three pathotypes of InPEC were identified including ETEC (8.10 %), EPEC (1.29 %) and STEC/ETEC (0.92 %). In particular, K88 was only found in ETEC from breeding farms, whereas F18 was only present in STEC/ETEC hybrid from finishing farms. Whole genome sequence analysis of 37 E. coli isolates revealed that InPEC strains frequently co-carried multiple antibiotic resistance gene (ARG). est, elt and F18 were also found to co-locate with ARGs on a single IncFIB/IncFII plasmid. InPEC isolates from different pathotypes also possessed different profiles of virulence genes and antimicrobial resistance genes. Population structure analysis demonstrated that InPEC isolates from different pathotypes were highly heterogeneous whereas those of the same pathotype were extremely similar. Plasmid analysis revealed that K88 and/or est/elt were found on pGX18-2-like/pGX203-2-like and pGX203-1-like IncFII plasmids, while F18 and elt/est, as well as diverse ARGs were found to co-locate on IncFII/IncFIB plasmids with a non-typical backbone. Moreover, these key virulence genes were flanked by or adjacent to IS elements. Our findings indicated that both clonal expansion and horizontal spread of epidemic IncFII plasmids contributed to the prevalence of InPEC and the specific virulence genes (F4, F18, elt and est) in the tested swine farms.

Development of iodine based sustained release antimicrobial coatings for polyurethane voice prostheses

Voice prostheses are known to fail in few weeks to several months of implantation due to the clogging mainly caused by microbial biofilm formation, which is a cause of concern. Iodine is a known broad-spectrum biocide and is reported to easily form complexes with various polymers. For long term device disinfection, strong iodine complexation that offers sustained iodine release for a prolonged period is essential. The present research work deals with the synthesis of a poly(methyl methacrylate-n-butyl acrylate-N-vinyl-2-pyrrolidone) (poly[MMA-BA-NVP]) tercopolymer through free radical polymerization for surface coating thermoplastic polyurethane (TPU) based voice prostheses. The NVP content in the tercopolymer was varied from 20% to 50% to optimise iodine loading and subsequent release. Base TPU coated with the tercopolymer was treated with 4% aqueous iodine solution at room temperature (28 ± 3 °C) for two hours. It was observed that the tercopolymer containing 35% N-vinyl-2-pyrrolidone (NVP), 32.5% methyl methacrylate (MMA) and 32.5% butyl acrylate (nBA) gave a stable coating on TPUs together with sustained iodine release for a prolonged period. Furthermore, the tercopolymer coated and iodine loaded TPUs exhibited excellent antimicrobial activity against Candida albicans, Staphylococcus aureus and Escherichia coli.

Polyethyleneimine surface-modified silver-selenium nanocomposites for anti-infective treatment of wounds by disrupting biofilms

Bacterial biofilm formation is associated with the pathogenicity of pathogens and poses a serious threat to human health and clinical therapy. Complex biofilm structures provide physical barriers that inhibit antibiotic penetration and inactivate antibiotics via enzymatic breakdown. The development of biofilm-disrupting nanoparticles offers a promising strategy for combating biofilm infections. Hence, polyethyleneimine surface-modified silver-selenium nanocomposites, Ag@Se@PEI (ASP NCs), were designed for synergistic antibacterial effects by destroying bacterial biofilms to promote wound healing. The results ofin vitroantimicrobial experiments showed that, ASP NCs achieved efficient antibacterial effects againstStaphylococcus aureus (S. aureus)andEscherichia coli (E. coli)by disrupting the formation of the bacterial biofilm, stimulating the outbreak of reactive oxygen species and destroying the integrity of bacterial cell membranes. Thein-vivobacterial infection in mice model showed that, ASP NCs further promoted wound healing and new tissue formation by reducing inflammatory factors and promoting collagen fiber formation which efficiently enhanced the antibacterial effect. Overall, ASP NCs possess low toxicity and minimal side effects, coupled with biocompatibility and efficient antibacterial properties. By disrupting biofilms and bacterial cell membranes, ASP NCs reduced inflammatory responses and accelerated the healing of infected wounds. This nanocomposite-based study offers new insights into antibacterial therapeutic strategies as potential alternatives to antibiotics for wound healing.

Zirconia Dental Implants Surface Electric Stimulation Impact on Staphylococcus aureus

Tooth loss during the lifetime of an individual is common. A strategy to treat partial or complete edentulous patients is the placement of dental implants. However, dental implants are subject to bacterial colonization and biofilm formation, which cause an infection named peri-implantitis. The existing long-term treatments for peri-implantitis are generally inefficient. Thus, an electrical circuit was produced with zirconia (Zr) samples using a hot-pressing technique to impregnate silver (Ag) through channels and holes to create a path by LASER texturing. The obtained specimens were characterized according to vitro cytotoxicity, to ensure ZrAg non-toxicity. Furthermore, samples were inoculated with Staphylococcus aureus using 6.5 mA of alternating current (AC). The current was delivered using a potentiostat and the influence on the bacterial concentration was assessed. Using AC, the specimens displayed no bacterial adhesion (Log 7 reduction). The in vitro results presented in this study suggest that this kind of treatment can be an alternative and promising strategy to treat and overcome bacterial adhesion around dental implants that can evolve to biofilm.

Lukianov D, Gayanova TE, Voronova EV, Shishilov ON, Stepakhin VD. The Synthesis and Analysis of the Cytotoxicity of Al2O3-Supported Silver Nanoparticles Prepared by the Plasma Chemical Process Initiated by Pulsed MW Radiation in the Al2O3-Ag Powder Mixtures

An original plasma chemical process initiated by microwave discharge in a mixture of metal and dielectric powders was applied to prepare specific materials, which consisted of microsized spherical particles of aluminum oxide covered with silver nanoparticles. The prepared materials are highly uniform in shape, size distribution, and composition. Their cytotoxicity was investigated using the human cell lines MCF7, HEK293T, A549, and VA-13 and the bacterial strains E. coli JW5503 (ΔtolC) and E. coli K12. Their cytotoxicity was found not to exceed the cytotoxicity of the starting materials. Thus, the prepared materials can be considered highly promising for catalysis and biotechnology applications.

Mechanisms of bacterial resistance to environmental silver and antimicrobial strategies for silver: A review

The good antimicrobial properties of silver make it widely used in food, medicine, and environmental applications. However, the release and accumulation of silver-based antimicrobial agents in the environment is increasing with the extensive use of silver-based antimicrobials, and the prevalence of silver-resistant bacteria is increasing. To prevent the emergence of superbugs, it is necessary to exercise rational and strict control over drug use. The mechanism of bacterial resistance to silver has not been fully elucidated, and this article provides a review of the progress of research on the mechanism of bacterial resistance to silver. The results indicate that bacterial resistance to silver can occur through inducing silver particles aggregation and Ag+ reduction, inhibiting silver contact with and entry into cells, efflux of silver particles and Ag+ in cells, and activation of damage repair mechanisms. We propose that the bacterial mechanism of silver resistance involves a combination of interrelated systems. Finally, we discuss how this information can be used to develop the next generation of silver-based antimicrobials and antimicrobial therapies. And some antimicrobial strategies are proposed such as the "Trojan Horse" - camouflage, using efflux pump inhibitors to reduce silver efflux, working with "minesweeper", immobilization of silver particles.

NHCs silver complexes as potential antimicrobial agents

NHCs (N-heterocyclic carbenes) are generally used as organic ligands that can coordinate with metal ions like silver to form stable complexes. These complexes have shown enhanced antimicrobial properties compared to silver alone. This document provides an overview of the reported NHC-based silver derivatives (acetates, chlorides, bromides, and iodides) who possess antimicrobial activity. This review covers articles published between the first report (2006) and 2023.

Near-infrared light responsive gold nanoparticles coating endows polyetheretherketone with enhanced osseointegration and antibacterial properties

Polyetheretherketone (PEEK) is considered as a promising dental implant material owing to its excellent physicochemical and mechanical properties. However, its wide range of applications is limited by its biologically inert nature. In this study, a near-infrared (NIR) light responsive bioactive coating with gold nanoparticles (AuNPs) and metronidazole adhered to the PEEK surface via dopamine polymerization. Compared to pure PEEK, the hydrophilicity of the treated PEEK surface was significantly improved. In addition, under NIR light, the surface coating exhibited photothermal conversion effect, and gold nanoparticles and the antibiotic can be released from the coating. This improved the antibacterial properties of PEEK materials. Moreover, the coating was more conducive to the early adhesion of bone mesenchymal stem cells. The results of in vitro and in vivo osteogenic activity studies showed that the developed coating promoted osseointegration of PEEK implants, and NIR light irradiation further improved the antibacterial ability and osteogenic activity of PEEK implants. Through RNA sequencing, the potential underlying mechanism of promoting bone formation of the AuNPs coating combined metronidazole was interpreted. In summary, the developed coating is a potential surface treatment strategy that endows PEEK with enhanced osseointegration and antibacterial properties.

An Investigation into the Larvicidal Activity of Biologically Synthesized Silver and Copper Oxide Nanoparticles Against Mosquito Larvae

This study is primarily focused on the synthesis of silver and copper oxide nanoparticles utilizing the extract of Ipomoea staphylina plant and their larvicidal activity against specific larvae. Notably, Anopheles stephensi and Aedes aegypti are significant disease vectors responsible for transmitting diseases such as malaria, dengue fever, Zika virus, and chikungunya (Anopheles stephensi), and dengue and Zika (Aedes aegypti). These mosquitoes have a substantial impact on urban areas, influencing disease transmission dynamics. In an effort to control these larvae, we have pursued the synthesis of a herbal-based nanomedicine derived from I. staphylina, a valuable herb in traditional medicine. Our successful synthesis of silver and CuO nanoparticles followed environmentally sustainable green chemistry methodologies. The I. staphylina plant extract played a dual role as a reducing agent and dopant, aligning with principles of sustainability. We employed X-ray diffraction (XRD) analysis to validate the nanoparticle structure and size, while field-emission scanning electron microscopy (FE-SEM) revealed well-defined nanostructures. Elemental composition was determined through energy-dispersive X-ray (EDX) analysis, and UV-visible spectroscopy provided insights into the bandgap energy (3.15 eV for silver, 1.2 eV for CuO nanoparticles). These nanoparticles exhibited robust larvicidal activity, with CuO nanoparticles surpassing silver nanoparticles in terms of LC50 and LC90 values. Moreover, the developmental toxicity of CuO and Ag NPs was evaluated in zebrafish embryos as part of non-target eco-toxicological studies conducted in a standard laboratory environment. These findings underscore the potential utility of these nanoparticles as highly effective and environmentally friendly natural pesticides, offering cost-effectiveness and ecological benefits.

Antiviral and Antibacterial 3D-Printed Products Functionalised with Poly(hexamethylene biguanide)

Infection prevention and public health are a vital concern worldwide, especially during pandemics such as COVID-19 and seasonal influenza. Frequent manual disinfection and use of chemical spray coatings at public facilities are the typical measures taken to protect people from coronaviruses and other pathogens. However, limitations of human resources and coating durability, as well as the safety of disinfectants used are the major concerns in society during a pandemic. Non-leachable antimicrobial agent poly(hexamethylene biguanide) (PHMB) was mixed into photocurable liquid resins to produce novel and tailor-made covers for public facilities via digital light processing, which is a popular 3D printing technique for satisfactory printing resolution. Potent efficacies of the 3D-printed plastics were achieved in standard antibacterial assessments against S. aureus, E. coli and K. pneumoniae. A total of 99.9% of Human coronavirus 229E was killed after being in contact with the 3D-printed samples (containing the promising PHMB formulation) for two hours. In an eight-week field test in Hong Kong Wetland Park, antibacterial performances of the specially designed 3D-printed covers analysed by environmental swabbing were also found to be satisfactory. With these remarkable outcomes, antimicrobial products prepared by digital light processing 3D printing can be regarded as a reliable solution to long-term infection prevention and control.

Synthesis, characterization, and antibacterial activity of chitosan-chelated silver nanoparticles

Bacterial infections pose a significant threat to human health and safety, necessitating the urgent resolution of the problem through the development and implementation of highly effective antibacterial agents. However, the emergence of multidrug-resistant bacteria has diminished the satisfactory effectiveness of antibacterial treatments. To overcome this obstacle, we developed effective antibacterial agents by chemical reduction for inhibiting bacterial proliferation and inducing membrane damage. Specifically, four different types of chitosan/Ag nanoparticle (CS-AgNPs-i) (i-1, 2, 3, 4) complexes were synthesized by varying the quantity of chitosan added during the synthesis process. We found that the amount of CS does not affect the morphology and size of CS-AgNPs-i, which remained at approximately 20 nm and all CS-AgNPs were mostly spherical. The zeta potential measurements indicated that the surface of CS-AgNPs carries a positive charge. Notably, elevating the chitosan concentration led to a more pronounced antibacterial impact, particularly evident in its interaction with the peptidoglycan layer on the bacterial surface. Our experimental results undeniably establish the potent antibacterial efficacy of CS-AgNPs against both Escherichia coli and Staphylococcus aureus. Employing live/dead bacterial staining, we reveal the marked capability of CS-AgNPs to effectively hinder bacterial proliferation. Furthermore, our experimental investigations revealed that CS-AgNPs possess broad-spectrum antimicrobial activity. The results of in vitro cytotoxicity experiments substantiated the high biocompatibility of CS-AgNPs with elevated chitosan loading. The study provides valuable insights into the development of nano-antibacterial agents that exhibit significant potential as a substitute to replace traditional antibiotics for medical applications.

Genome-wide transcriptional response to silver stress in extremely halophilic archaeon Haloferax alexandrinus DSM 27206 T

BACKGROUND

The extremely halophilic archaeon Haloferax (Hfx.) alexandrinus DSM 27206 T was previously documented for the ability to biosynthesize silver nanoparticles while mechanisms underlying its silver tolerance were overlooked. In the current study, we aimed to assess the transcriptional response of this haloarchaeon to varying concentrations of silver, seeking a comprehensive understanding of the molecular determinants underpinning its heavy metal tolerance.

RESULTS

The growth curves confirmed the capacity of Hfx. alexandrinus to surmount silver stress, while the SEM-EDS analysis illustrated the presence of silver nanoparticles in cultures exposed to 0.5 mM silver nitrate. The RNA-Seq based transcriptomic analysis of Hfx. alexandrinus cells exposed to 0.1, 0.25, and 0.5 mM silver nitrate revealed the differential expression of multiple sets of genes potentially employed in heavy-metal stress response, genes mostly related to metal transporters, basic metabolism, oxidative stress response and cellular motility. The RT-qPCR analysis of selected transcripts was conducted to verify and validate the generated RNA-Seq data.

CONCLUSIONS

Our results indicated that copA, encoding the copper ATPase, is essential for the survival of Hfx. alexandrinus cells in silver-containing saline media. The silver-exposed cultures underwent several metabolic adjustments that enabled the activation of enzymes involved in the oxidative stress response and impairment of the cellular movement capacity. To our knowledge, this study represents the first comprehensive analysis of gene expression in halophillic archaea facing increased levels of heavy metals.

Potential mechanism of the AgNCs-hydrogel in promoting the regeneration of diabetic infectious wounds

Diabetic infectious wound treatment is challenging due to insistent wound infections. To treat such complicated pathological diabetic infectious wounds, multifunctional materials need to be developed, and their mechanisms need to be understood. Here, we developed a material termed AgNCs-hydrogel, which is a multifunctional DNA hydrogel used as dressings by integrating it with antibacterial silver nanoclusters. The AgNCs-hydrogel was applied to promote the regeneration of diabetic infectious wounds in mice because it exhibited superior antibacterial activity and effective ROS-scavenging properties. Based on skin proteomics, we explored the potential mechanism of the AgNCs-hydrogel in treating mouse skin wounds. We found that the AgNCs-hydrogel can regulate some key proteins located primarily in the extracellular exosomes, involved in the negative regulation of the apoptotic process, and perform ATP binding to accelerate diabetic infected wound closure. Therefore, this study provided a multifunctional AgNCs-hydrogel and revealed its potential mechanism in promoting the regeneration of diabetic infectious wounds.

Synthesis of Multifunctional Mn3O4-Ag2S Janus Nanoparticles for Enhanced T1-Magnetic Resonance Imaging and Photo-Induced Tumor Therapy

The global burden of cancer is increasing rapidly, and nanomedicine offers promising prospects for enhancing the life expectancy of cancer patients. Janus nanoparticles (JNPs) have garnered considerable attention due to their asymmetric geometry, enabling multifunctionality in drug delivery and theranostics. However, achieving precise control over the self-assembly of JNPs in solution at the nanoscale level poses significant challenges. Herein, a low-temperature reversed-phase microemulsion system was used to obtain homogenous Mn3O4-Ag2S JNPs, which showed significant potential in cancer theranostics. Structural characterization revealed that the Ag2S (5-10 nm) part was uniformly deposited on a specific surface of Mn3O4 to form a Mn3O4-Ag2S Janus morphology. Compared to the single-component Mn3O4 and Ag2S particles, the fabricated Mn3O4-Ag2S JNPs exhibited satisfactory biocompatibility and therapeutic performance. Novel diagnostic and therapeutic nanoplatforms can be guided using the magnetic component in JNPs, which is revealed as an excellent T1 contrast enhancement agent in magnetic resonance imaging (MRI) with multiple functions, such as photo-induced regulation of the tumor microenvironment via producing reactive oxygen species and second near-infrared region (NIR-II) photothermal excitation for in vitro tumor-killing effects. The prime antibacterial and promising theranostics results demonstrate the extensive potential of the designed photo-responsive Mn3O4-Ag2S JNPs for biomedical applications.

Modification of 3D-Printed PLA Structures Using Photo-Iniferter Polymerization: Toward On-Demand Antimicrobial Water Filters

Water filtration is an important application to ensure the accessibility of clean drinking water. As requirements and contaminants vary on a local level, adjustable filter devices and their evaluation with contaminants are required. Within this work, modular filter devices are designed featuring an adjustable surface functionalization. For this purpose, 3D-printed structures are created consisting of bio-based poly(lactic acid) (PLA) that are manufactured by extrusion printing. The surface of PLA is activated with amino groups that are used to install xanthates as chain transfer agents. Subsequently, photo-iniferter (PI) polymerization is used to create cationic polymer brushes on the surface of PLA substrates. Multiple surface characterization techniques are employed to prove successful growth of polymer brushes on PLA. After initial optimization studies on flat surfaces, filter devices are printed, functionalized, and used to remove bacteria from contaminated water. Significant reduction of the number of microorganisms is detected after filtration (single filtration or cycling) and contaminating organism can also be removed from freshwater samples by simple incubation with a 3D-printed filter. The herein developed setup for producing functional filter devices and probing their performance in affinity filtration is a useful platform technology, enabling the rapid testing of polymer brushes for such applications.

Process Development of a Generative Method for Partial and Controlled Integration of Active Substances into Open-Porous Matrix Structures

A special generative manufacturing (AM) process was developed for the partial integration of active ingredients into open-porous matrix structures. A mixture of a silver-containing solution as an antibacterial material with an alginate hydrogel as a carrier system was produced as the active ingredient. The AM process developed was used to introduce the active ingredient solution into an open-porous niobium containing a β-titanium matrix structure, thus creating a reproducible active ingredient delivery system. The matrix structure had already been produced in a separate AM process by means of selective laser melting (SLM). The main advantage of this process is the ability to control porosity with high precision. To determine optimal surface conditions for the integration of active ingredients into the matrix structure, different surface conditions of the titanium substrate were tested for their impact on wetting behaviour of a silver-containing hydrogel solution. The solution-substrate contact angle was measured and evaluated to determine the most favourable surface condition. To develop the generative manufacturing process, an FDM printer underwent modifications that permitted partial application of the drug solution to the structure in accordance with the bioprinting principle. The modified process enabled flexible control and programming of both the position and volume of the applied drug. Furthermore, the process was able to fill up to 95% of the titanium matrix body pore volume used. The customised application of drug carriers onto implants as a drug delivery system can be achieved via the developed process, providing an alternative to established methods like dip coating that lack this capability.

ZnO Quantum Photoinitiators as an All-in-One Solution for Multifunctional Photopolymer Nanocomposites

Nanocomposites are constructed from a matrix material combined with dispersed nanosized filler particles. Such a combination yields a powerful ability to tailor the desired mechanical, optical, electrical, thermodynamic, and antimicrobial material properties. Colloidal semiconductor nanocrystals (SCNCs) are exciting potential fillers, as they display size-, shape-, and composition-controlled properties and are easily embedded in diverse matrices. Here we present their role as quantum photoinitiators (QPIs) in acrylate-based polymer, where they act as a catalytic radical initiator and endow the system with mechanical, photocatalytic, and antimicrobial properties. By utilizing ZnO nanorods (NRs) as QPIs, we were able to increase the tensile strength and elongation at break of poly(ethylene glycol) diacrylate (PEGDA) hydrogels by up to 85%, unlike the use of the same ZnO NRs acting merely as fillers. Simultaneously, we endowed the PEGDA hydrogels with post-polymerization photocatalytic and antimicrobial activities and showed their ability to decompose methylene blue and significantly eradicate antibiotic-resistant bacteria and viral pathogens. Moreover, we demonstrate two fabrication showcase methods, traditional molding and digital light processing printing, that can yield hydrogels with complex architectures. These results position SCNC-based systems as promising candidates to act as all-in-one photoinitiators and fillers in nanocomposites for diverse biomedical applications, where specific and purpose-oriented characteristics are required.

Aerosol Inhalation Delivery of Ag Nanoparticles in Mice: Pharmacokinetics and Antibacterial Action

The aerosol inhalation delivery of composite particles consisting of Ag nanoparticles enveloped by polyvinylpyrrolidone was investigated in experiments with mice. An ultrasonic nebulizing system was created for the generation of aerosols with a mean diameter and mass concentration of 700 ± 50 nm and 65 ± 5 mg/m3, respectively. The mass fraction of Ag in the composite particles was α = 0.061. The aerosol delivery was performed in a whole-body chamber with an exposition time of 20 min. Pharmacokinetic measurements were taken and the silver concentrations in the blood and lungs of the mice were measured as a function of time after exposition by means of electrothermal (graphite furnace) atomic absorption spectrometry. The inhalation dose and other pharmacokinetic parameters were determined. The antibacterial effect of aerosolized silver was assessed for mice infected with Klebsiella pneumoniae 82 and Staphylococcus aureus ATCC 25953. The survival rate of the infected mice after the aerosol exposure demonstrated the high antibacterial efficiency of Ag nanoparticles after inhalation delivery.

Synthesis, physicochemical characteristics, cytocompatibility, and antibacterial properties of iron-doped biphasic calcium phosphate nanoparticles with incorporation of silver

The application of biphasic calcium phosphate (BCP) in tissue engineering and regenerative medicine has been widely explored due to its extensively documented multi-functionality. The present study attempts to synthesize a new type of BCP nanoparticles, characterised with favourable cytocompatibility and antibacterial properties via modifications in their structure, functionality and assemblage, using dopants. In this regard, this study initially synthesized iron-doped BCP (FB) nanoparticles with silver subsequently incorporated into FB nanoparticles to create a nanostructured composite (FBAg). The FB and FBAgnanoparticles were then characterized using Fourier transform infrared spectroscopy, x-ray diffraction, ultraviolet-visible spectroscopy, and x-ray photoelectron spectroscopy. The results showed that silver was present in the FBAgnanoparticles, with a positive correlation observed between increasing AgNO3concentrations and increasing shape irregularity and reduced particle size distribution. Additionally, cell culture tests revealed that both FB and FBAgnanoparticles were compatible with bone marrow-derived mesenchymal stem cells (hBMSCs). The antibacterial activity of the FBAgnanoparticles was also tested using Gram-negativeE. coliand Gram-positiveS. aureus, and was found to be effective against both bacteria. The inhibition rates of FBAgnanoparticles againstE. coliandS. aureuswere 33.78 ± 1.69-59.03 ± 2.95%, and 68.48 ± 4.11-89.09 ± 5.35%, respectively. These findings suggest that the FBAgnanoparticles have potential use in future biomedical applications.

Multidrug-resistant Enterobacter spp. in wastewater and surface water: Molecular characterization of β-lactam resistance and metal tolerance genes

Among the ESKAPE group pathogens, Enterobacter spp. is an opportunistic Gram-negative bacillus, widely dispersed in the environment, that causes infections. In the present study, samples of hospital wastewater, raw and treated urban wastewater, as well as surface receiving water, were collected to assess the occurrence of multidrug-resistant (MDR) Enterobacter spp. A molecular characterization of β-lactam antibiotic resistance and metal tolerance genes was performed. According to identification by MALDI-TOF MS, 14 isolates were obtained: 7 E. bugandensis, 5 E. kobei, and 2 E. cloacae. The isolates showed resistance mainly to β-lactam antibiotics, including those used to treat infections caused by MDR bacteria. Multiple antibiotic resistance index was calculated for all isolates. It allowed verify whether sampling points showed a high risk due to antibiotic resistant Enterobacter spp., as well as to determine if the isolates have been in environments with a frequent antibiotic use. Twelve isolates showed β-lactam antibiotic resistance gene, being the blaKPC widely detected. Regarding metal tolerance, 13 isolates showed at least two genes that encode metal tolerance mechanisms. Overall, metal tolerance mechanisms to silver, copper, mercury, arsenic and tellurium were found. New data on metal tolerance mechanisms dispersion and antibiotic-resistance characterization of the E. bugandensis and E. kobei species were here provided. The occurrence of MDR Enterobacter spp. in analyzed samples draws attention to an urgent need to put control measures into practice. It also evidences waterborne spread of clinically important antibiotic-resistant bacteria recognized as critical priority pathogens.

Particle-Driven Effects at the Bacteria Interface: A Nanosilver Investigation of Particle Shape and Dose Metric

Design criteria for controlling engineered nanomaterial (ENM) antimicrobial performance will enable advances in medical, food production, processing and preservation, and water treatment applications. In pursuit of this goal, better resolution of how specific ENM properties, such as nanoparticle shape, influence antimicrobial activity is needed. This study probes the antimicrobial activity toward a model Gram-negative bacterium, Escherichia coli (E. coli), that results from interfacial interactions with differently shaped silver nanoparticles (AgNPs): cube-, disc-, and pseudospherical-AgNPs. The EC50 value (i.e., the concentration of AgNPs that inactivates 50% of the microbial population) for each shape is identified and presented as a function of mass, surface area, and particle number. Further, shifts in relative potency are identified from the associated dose-response curves (e.g., shifts left, to lower concentrations, indicate greater potency). When using a mass-based dose metric, the disc-AgNPs present the highest antimicrobial activity of the three shapes (EC50: 2.39 ± 0.26 μg/mL for discs, 2.99 ± 0.96 μg/mL for cubes, 116.33 ± 6.43 μg/mL for pseudospheres). When surface area and particle number are used as dose metrics, the cube-AgNPs possess the highest antimicrobial activity (EC50-surface area: 4.70 × 10-5 ± 1.51 × 10-5 m2/mL, EC50-particle: 5.97 × 109 ± 1.92 × 109 particles/mL), such that the relative trend in potency becomes cubes > discs > pseudospheres and cubes ≫ discs ⩾ pseudospheres, respectively. The results reveal that the antimicrobial potency of disc-AgNPs is sensitive to the dose metric, significantly decreasing in potency (∼5-30×) upon conversion from a mass-based concentration to surface area and particle number and influencing the conclusions drawn. The shift in relative particle potency highlights the importance of investigating various dose metrics within the experimental design and signals different particle parameters influencing shape-based antimicrobial activity. To probe shape-dependent behavior, we use a unique empirical approach where the physical and chemical properties (ligand chemistry, surface charge) of the AgNP shapes are carefully controlled, and total available surface area is equivalent across shapes as made through modifications to particle size and concentration. The results herein suggest that surface area alone does not drive antimicrobial activity as the different AgNP shapes at equivalent particle surface area yield significantly different magnitudes of antimicrobial activity (i.e., 100% inactivation for cube-AgNPs, <25% inactivation for disc- and pseudospherical-AgNPs). Further, the particle shapes studied possess different crystal facets, illuminating their potential influence on differentiating interactions between the particle surface and the microbe. Whereas surface area may partly contribute to antimicrobial activity in certain ENM shapes (i.e., disc-AgNPs in relation to the pseudospherical-AgNPs), the different magnitudes of antimicrobial activity across shape provide insight into the likely role of other particle-specific factors, such as crystal facets, driving the antimicrobial activity of other shapes (i.e., cube-AgNPs).

Advanced Bioactive Glasses: The Newest Achievements and Breakthroughs in the Area

Bioactive glasses (BGs) are especially useful materials in soft and bone tissue engineering and even in dentistry. They can be the solution to many medical problems, and they have a huge role in the healing processes of bone fractures. Interestingly, they can also promote skin regeneration and wound healing. Bioactive glasses are able to attach to the bone tissues and form an apatite layer which further initiates the biomineralization process. The formed intermediate apatite layer makes a connection between the hard tissue and the bioactive glass material which results in faster healing without any complications or side effects. This review paper summarizes the most recent advancement in the preparation of diverse types of BGs, such as silicate-, borate- and phosphate-based bioactive glasses. We discuss their physical, chemical, and mechanical properties detailing how they affect their biological performances. In order to get a deeper insight into the state-of-the-art in this area, we also consider their medical applications, such as bone regeneration, wound care, and dental/bone implant coatings.

Research progress and future prospects of antimicrobial modified polyetheretherketone (PEEK) for the treatment of bone infections

Infection of the bone is a difficult problem in orthopedic diseases. The key and basis of the treatment of bone infection is the effective control of local infection, as well as the elimination of infection focus and dead cavities. The most commonly used approach utilized for the prevention and management of bone infection is the application of antibiotic bone cement. However, the incorporation of antibiotics into the cement matrix has been found to considerably compromise the mechanical characteristics of bone cement. Moreover, some investigations have indicated that the antibiotic release rate of antibiotic bone cement is relatively low. Polyetheretherketone (PEEK) and its composites have been considered to perfectly address the challenges above, according to its favorable biomechanical characteristics and diverse surface functionalizations. This article provides a comprehensive overview of the recent advancements in the antimicrobial modification of PEEK composites in the field of antibacterial therapy of bone infection. Furthermore, the potential application of PEEK-modified materials in clinical treatment was discussed and predicted.

Nanosilver: An Old Antibacterial Agent with Great Promise in the Fight against Antibiotic Resistance

Antibiotic resistance in bacteria is a major problem worldwide that costs 55 billion USD annually for extended hospitalization, resource utilization, and additional treatment expenditures in the United States. This review examines the roles and forms of silver (e.g., bulk Ag, silver salts (AgNO3), and colloidal Ag) from antiquity to the present, and its eventual incorporation as silver nanoparticles (AgNPs) in numerous antibacterial consumer products and biomedical applications. The AgNP fabrication methods, physicochemical properties, and antibacterial mechanisms in Gram-positive and Gram-negative bacterial models are covered. The emphasis is on the problematic ESKAPE pathogens and the antibiotic-resistant pathogens of the greatest human health concern according to the World Health Organization. This review delineates the differences between each bacterial model, the role of the physicochemical properties of AgNPs in the interaction with pathogens, and the subsequent damage of AgNPs and Ag+ released by AgNPs on structural cellular components. In closing, the processes of antibiotic resistance attainment and how novel AgNP-antibiotic conjugates may synergistically reduce the growth of antibiotic-resistant pathogens are presented in light of promising examples, where antibiotic efficacy alone is decreased.

Silver nanoparticles loaded on lactose/alginate: in situ synthesis, catalytic degradation, and pH-dependent antibacterial activity

We present the in situ synthesis of silver nanoparticles (AgNPs) through ionotropic gelation utilizing the biodegradable saccharides lactose (Lac) and alginate (Alg). The lactose reduced silver ions to form AgNPs. The crystallite structure of the nanocomposite AgNPs@Lac/Alg, with a mean size of 4-6 nm, was confirmed by analytical techniques. The nanocomposite exhibited high catalytic performance in degrading the pollutants methyl orange and rhodamine B. The antibacterial activity of the nanocomposite is pH-dependent, related to the alterations in surface properties of the nanocomposite at different pH values. At pH 6, the nanocomposite demonstrated the highest antibacterial activity. These findings suggest that this nanocomposite has the potential to be tailored for specific applications in environmental and medicinal treatments, making it a highly promising material.

Metagenomic analysis reveals the short-term influences on conjugation of blaNDM-1 and microbiome in hospital wastewater by silver nanoparticles at environmental-related concentration

Hospital wastewater contains large amounts of antibiotic-resistant bacteria and serves as an important reservoir for horizontal gene transfer (HGT). However, the response of the microbiome in hospital wastewater to silver remains unclear. In this study, the short-term impacts of silver on the microbiome in hospital wastewater were investigated by metagenome next-generation sequencing. The influence of silver on the conjugation of plasmid carrying bla_NDM-1 was further examined. Our results showed that in hospital wastewater, high abundances of antibiotic resistance genes (ARGs) were detected. The distribution tendencies of certain ARG types on chromosomes or plasmids were different. Clinically important ARGs were identified in phage-like contigs, indicating potential transmission via transduction. Pseudomonadales, Enterobacterales, and Bacteroidales were the major ARG hosts. Mobile genetic elements were mainly detected in plasmids and associated with various types of ARGs. The binning approach identified 29 bins that were assigned to three phyla. Various ARGs and virulence factors were identified in 14 and 11 bins, respectively. MetaCHIP identified 49 HGT events. The transferred genes were annotated as ARGs, mobile genetic elements, and functional genes, and they mainly originated from donors belonging to Bacteroides and Pseudomonadales. In addition, 20 nm AgNPs reduced microbial diversity and enhanced the relative abundance of Acinetobacter. The changes induced by 20 nm AgNPs included increases in the abundances of ARGs and genes involved lipid metabolism pathway. Conjugation experiments showed that Ag⁺ and 20 nm AgNPs caused 2.38-, 3.31-, 4.72-, and 4.57-fold and 1.46-, 1.61-, 3.86-, and 2.16-fold increases in conjugation frequencies of plasmid with bla_NDM-1 at 0.1, 1, 10, and 100 μg/L, respectively. Our findings provide insight into the response of the microbiome in hospital wastewater to silver, emphasize the adaptation capability of Acinetobacter inhabiting hospitals against adverse environments, and highlight the promotion of silver for antibiotic resistance.

Antimicrobial activity of ion-substituted calcium phosphates: A systematic review

In this systematic review, the antimicrobial effect of ion-substituted calcium phosphate biomaterials was quantitatively assessed. The literature was systematically searched up to the 6th of December 2021. Study selection and data extraction was performed in duplo by two independent reviewers with a modified version of the OHAT tool for risk of bias assessment. Any differences were resolved by consensus or by a referee. A mixed effects model was used to investigate the relation between the degree of ionic substitution and bacterial reduction. Of 1016 identified studies, 108 were included in the analysis. The methodological quality of included studies ranged from 6 to 16 out of 18 (average 11.4). Selenite, copper, zinc, rubidium, gadolinium, silver and samarium had a clear antimicrobial effect, with a log reduction in bacteria count of 0.23, 1.8, 2.1, 3.6, 5.8, 7.4 and 10 per atomic% of substitution, respectively. There was considerable between-study variation, which could partially be explained by differences in material formulation, study quality and microbial strain. Future research should focus on clinically relevant scenarios in vitro and the translation to in vivo prevention of PJI.

Study on injectable silver-incorporated calcium phosphate composite with enhanced antibacterial and biomechanical properties for fighting bone cement-associated infections

Although commonly used in orthopedic surgery, bone cements often face a high risk of post-operative infection. Developing bone cement with antibacterial capability is an effective path for eliminating implant-associated infections. Herein, the potential of silver ions (Ag⁺) and silver nanoparticles (AgNPs) in modifying CPC for long-term antibacterial property was investigated. Ag⁺ ions or AgNPs of various concentrations were incorporated in starch-modified calcium phosphate bone cement (CPB) to obtain Ag⁺-containing (Ag⁺@CPB) and AgNPs-containing (AgNP@CPB) bone cements. The results showed that all silver-containing CPBs had setting times of about 25-40 min, compressive strengths of greater than 22 MPa, high cytocompatibility but inhibitory effect on Staphylococcus aureus growth. After soaking for 1 week, the mechanical properties and the cytocompatibility of all cements revealed no significant changes, but only CPB with a relatively high content of Ag⁺ (H-Ag⁺@CPB) maintained good antibacterial capability over the tested time period. In addition, all the cements showed high injectability and interdigitating capability in cancellous bone and demonstrated augmentation effect on the cannulated pedicle screws fixation in the Sawbones model. In summary, the sustainable antibacterial capability and enhanced biomechanical properties demonstrated that Ag⁺ ions were more suitable for the fabrication of antibacterial CPC compared to AgNPs. Also, the H-Ag⁺@CPB, with good injectability, high cytocompatibility, good interdigitating and biomechanical property in cancellous bone, and sustainable antibacterial effects, bears great potential for the treatments of bone infections or implant-associated infections.

Enhanced in vitro antibacterial effect against Enterococcus faecalis by using both low-dose cetylpyridinium chloride and silver ions

BACKGROUND

Enterococcus faecalis (E. faecalis) is frequently isolated from root canals with failed root canal treatments. Due to the strong ability of E. faecalis to resist many often-used antimicrobials, coping with E. faecalis infections remains a challenge. The aim of this study was to investigate the synergistic antibacterial effect of low-dose cetylpyridinium chloride (CPC) and silver ions (Ag⁺) against E. faecalis in vitro.

METHODS

The minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC) and the fractional inhibitory concentration index (FICI) were used to confirm the existence of the synergic antibacterial activity between low-dose CPC and Ag⁺. Colony-forming unit (CFU) counting, time-killing curve and dynamic growth curve were used to evaluate the antimicrobial effects of CPC and Ag⁺ combinations against planktonic E. faecalis. Four weeks biofilms were treated with drug-contained gels to determine the antimicrobial effect on biofilm-resident E.faecalis, and the integrity of E.faecalis and its biofilms were observed by FE-SEM. CCK-8 assays was used to test the cytotoxicity of CPC and Ag⁺ combinations on MC3T3-E1 cells.

RESULTS

The results confirmed the synergistic antibacterial effect of low-dose CPC and Ag⁺ against both planktonic and 4-week biofilm E. faecalis. After the addition of CPC, the sensitivity of both planktonic and biofilm-resident E. faecalis to Ag⁺ improved, and the combination showed good biocompatibility on MC3T3-E1 cells.

CONCLUSIONS

Low-dose CPC enhanced the antibacterial ability of Ag⁺ against both planktonic and biofilm E.faecalis with good biocompatibility. It may be developed into a novel and potent antibacterial agent against E.faecalis, with low toxicity for root canal disinfection or other related medical applications.

Silver Nanocubes: From Serendipity to Mechanistic Understanding, Rational Synthesis, and Niche Applications

Silver has long been interwoven into human history, and its uses have evolved from currency and jewelry to medicine, information technology, catalysis, and electronics. Within the last century, the development of nanomaterials has further solidified the importance of this element. Despite this long history, there was essentially no mechanistic understanding or experimental control of silver nanocrystal synthesis until about two decades ago. Here we aim to provide an account of the history and development of the colloidal synthesis of silver nanocubes, as well as some of their major applications. We begin with a description of the first accidental synthesis of silver nanocubes that spurred subsequent investigations into each of the individual components of the protocol, revealing piece by piece parts of the mechanistic puzzle. This is followed by a discussion of the various obstacles inherent to the original method alongside mechanistic details developed to optimize the synthetic protocol. Finally, we discuss a range of applications enabled by the plasmonic and catalytic properties of silver nanocubes, including localized surface plasmon resonance, surface-enhanced Raman scattering, metamaterials, and ethylene epoxidation, as well as further derivatization and development of size, shape, composition, and related properties.

Relating mechanistic fate with spatial positioning for colloid transport in surface heterogeneous porous media

HYPOTHESES

The transport behavior of colloids in subsurface porous media is altered by surface chemical and physical heterogeneities. Understanding the mechanisms involved and distribution outcomes is crucial to assess and control groundwater contamination. The multi-scale processes that broaden residence time distribution for particles in the medium are here succinctly described with an upscaling model. Experiments/model: The spatial distribution of silver particles along glass bead-packed columns obtained from X-ray micro-computed tomography and a mechanistic upscaling model were used to study colloid retention across interface-, collector-, pore-, and Darcy-scales. Simulated energy profiles considering variable colloid-grain interactions were used to determine collector efficiencies from particle trajectories via full force-torque balance. Rate coefficients were determined from collector efficiencies to parameterize the advective-dispersive-reactive model that reports breakthrough curves and depth profiles.

FINDINGS

Our results indicate that: (i) with surface heterogeneity, individual colloid-grain interactions are non-unique and span from repulsive to attractive extremes; (ii) experimentally observed spatial positioning of retention at grain-water interfaces and grain-to-grain contacts is governed respectively by mechanistic attachment to the grain surface and retention without contact at rear-flow stagnation zones, and (iii) experimentally observed non-monotonic retention profiles and heavy-tailed breakthrough curves can be modeled with explicit implementation of heterogeneity at smaller scales.

Inorganic hollow mesoporous spheres-based delivery for antimicrobial agents

Microorganisms coexist with human beings and have formed a complex relationship with us. However, the abnormal spread of pathogens can cause infectious diseases thus demands antibacterial agents. Currently available antimicrobials, such as silver ions, antimicrobial peptides and antibiotics, have diverse concerns in chemical stability, biocompatibility, or triggering drug resistance. The "encapsulate-and-deliver" strategy can protect antimicrobials against decomposing, so to avoid large dose release induced resistance and achieve the controlled release. Considering loading capacity, engineering feasibility, and economic viability, inorganic hollow mesoporous spheres (iHMSs) represent one kind of promising and suitable candidates for real-life antimicrobial applications. Here we reviewed the recent research progress of iHMSs-based antimicrobial delivery. We summarized the synthesis of iHMSs and the drug loading method of various antimicrobials, and discussed the future applications. To prevent and mitigate the spread of an infective disease, multilateral coordination at the national level is required. Moreover, developing effective and practicable antimicrobials is the key to enhancing our capability to eliminate pathogenic microbes. We believe that our conclusion will be beneficial for researches on the antimicrobial delivery in both lab and mass production phases.

A Novel Minidumbbell DNA-Based Sensor for Silver Ion Detection

Silver ion (Ag⁺) is one of the most common heavy metal ions that cause environmental pollution and affect human health, and therefore, its detection is of great importance in the field of analytical chemistry. Here, we report an 8-nucleotide (nt) minidumbbell DNA-based sensor (M-DNA) for Ag⁺ detection. The minidumbbell contained a unique reverse wobble C·C mispair in the minor groove, which served as the binding site for Ag⁺. The M-DNA sensor could achieve a detection limit of 2.1 nM and sense Ag⁺ in real environmental samples with high accuracy. More importantly, the M-DNA sensor exhibited advantages of fast kinetics and easy operation owing to the usage of an ultrashort oligonucleotide. The minidumbbell represents a new and minimal non-B DNA structural motif for Ag⁺ sensing, allowing for the further development of on-site environmental Ag⁺ detection devices.

Mechanochemical Preparation, Solid-State Characterization, and Antimicrobial Performance of Copper and Silver Nitrate Coordination Polymers with L- and DL-Arginine and Histidine

The antimicrobial activity of the novel coordination polymers obtained by co-crystallizing the amino acids arginine or histidine, as both enantiopure L and racemic DL forms, with the salts Cu(NO3)2 and AgNO3 has been investigated to explore the effect of chirality in the cases of enantiopure and racemic forms. The compounds [Cu·AA·(NO3)2]CPs and [Ag·AA·NO3]CPs (AA = L-Arg, DL-Arg, L-His, DL-His) were prepared by mechanochemical, slurry, and solution methods and characterized by X-ray single-crystal and powder diffraction in the cases of the copper coordination polymers, and by powder diffraction and by solid-state NMR spectroscopy in the cases of the silver compounds. The two pairs of coordination polymers, [Cu·L-Arg·(NO3)2·H2O]CP and [Cu·DL-Arg·(NO3)2·H2O]CP, and [Cu·L-Hys·(NO3)2·H2O]CP and [Cu·DL-His·(NO3)2·H2O]CP, have been shown to be isostructural in spite of the different chirality of the amino acid ligands. A similar structural analogy could be established for the silver complexes on the basis of SSNMR. The activity against the bacterial pathogens Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus was assessed by carrying out disk diffusion assays on lysogeny agar media showing that, while there is no significant effect arising from the use of enantiopure or chiral amino acids, the coordination polymers exert an appreciable antimicrobial activity comparable, when not superior, to that of the metal salts alone.

Surface competition between osteoblasts and bacteria on silver-doped bioactive titanium implant

The rapid integration in the bone tissue and the prevention of bacterial infection are key for the success of the implant. In this regard, a silver (Ag)-doped thermochemical treatment that generate an Ag-doped calcium titanate layer on titanium (Ti) implants was previously developed by our group to improve the bone-bonding ability and provide antibacterial activity. In the present study, the biological and antibacterial potential of this coating has been further studied. In order to prove that the Ag-doped layer has an antibacterial effect with no detrimental effect on the bone cells, the behavior of osteoblast-like cells in terms of cell adhesion, morphology, proliferation and differentiation was evaluated, and the biofilm inhibition capacity was assessed. Moreover, the competition by the surface between cell and bacteria was carried out in two different co-culture methods. Finally, the treatment was applied to porous Ti implants to study in vivo osteointegration. The results show that the incorporation of Ag inhibits the biofilm formation and has no effect on the performance of osteoblast-like cells. Therefore, it can be concluded that the Ag-doped surface is capable of preventing bone bacterial infection and providing suitable osseointegration.

Organomodified nanoclay with boron compounds is improving structural and antibacterial properties of nanofibrous matrices

In this study, nanofibrous polymeric matrices were successfully developed with nanoclay, montmorillonite (MMT) and various boron (B) compounds, which were known to have positive effects on the wound healing with elevated antibacterial properties. For this purpose, MMT was modified with quaternary ammonium salt, trimethyl octadecyl ammonium bromide (TMOD), and boron compounds, boron nitride (BN), zinc borate (ZB), or phenylboronic acid (PBA) were adsorbed on organomodified MMT (OMMT). Then, poly (lactic acid) (PLA) based nanofibrous PLA-OMMT/B composites were fabricated via electrospinning. Modification of MMT nanoparticles with TMOD occurred through ion-exchange reaction and led to better homogenous fibrous structures which exhibited dramatic inhibition for gram-positive bacteria. Moreover, composites with ZB and PBA demonstrated both bacteriostatic and bactericidal effects for gram-positive and gram-negative bacteria. The chemical structures of the matrices were evaluated through ATR-FTIR and supported the intercalated composite formation. The thermal and mechanical stabilities of PLA matrices were also enhanced after OMMT and B incorporation. The lowest breaking strain value was recorded for PLA-OMMT/PBA composite compared to other B composites. The 100% and 50% extracts of the PLA-OMMT matrices showed modest cytotoxic effect on the human dermal fibroblasts (NHDF) on the second day culture that probably originated from TMOD. These results demonstrated that PLA-OMMT/B matrices, especially PBA including matrices, can be used as replaceable wound dressings that have limited interaction with cells but exhibit antibacterial activity and support the early stages of wound healing both morphologically and chemically.

Development of Nanoparticle Adaptation Phenomena in Acinetobacter baumannii: Physiological Change and Defense Response

The present work describes the evolution of a resistance phenotype to a multitargeting antimicrobial agent, namely, silver nanoparticles (nanosilver; NAg), in the globally prevalent bacterial pathogen Acinetobacter baumannii. The Gram-negative bacterium has recently been listed as a critical priority pathogen requiring novel treatment options by the World Health Organization. Through prolonged exposure to the important antimicrobial nanoparticle, the bacterium developed mutations in genes that encode the protein subunits of organelle structures that are involved in cell-to-surface attachment as well as in a cell envelope capsular polysaccharide synthesis-related gene. These mutations are potentially correlated with stable physiological changes in the biofilm growth behavior and with an evident protective effect against oxidative stress, most likely as a feature of toxicity defense. We further report a different adaptation response of A. baumannii to the cationic form of silver (Ag+). The bacterium developed a tolerance phenotype to Ag+, which was correlated with an indicative surge in respiratory activity and changes in cell morphology, of which these are reported characteristics of tolerant bacterial populations. The findings regarding adaptation phenomena to NAg highlight the risks of the long-term use of the nanoparticle on a priority pathogen. The findings urge the implementation of strategies to overcome bacterial NAg adaptation, to better elucidate the toxicity mechanisms of the nanoparticle, and preserve the efficacy of the potent alternative antimicrobial agent in this era of antimicrobial resistance. IMPORTANCE Several recent studies have reported on the development of bacterial resistance to broad-spectrum antimicrobial silver nanoparticles (nanosilver; NAg). NAg is currently one of the most important alternative antimicrobial agents. However, no studies have yet established whether Acinetobacter baumannii, a globally prevalent nosocomial pathogen, can develop resistance to the nanoparticle. The study herein describes how a model strain of A. baumannii with no inherent silver resistance determinants developed resistance to NAg, following prolonged exposure. The stable physiological changes are correlated with mutations detected in the bacterium genome. These mutations render the bacterium capable of proliferating at a toxic NAg concentration. It was also found that A. baumannii developed a "slower-to-kill" tolerance trait to Ag+, which highlights the unique antimicrobial activities between the nanoparticulate and the ionic forms of silver. Despite the proven efficacy of NAg, the observation of NAg resistance in A. baumannii emphasises the potential risks of the repeated overuse of this agent on a priority pathogen.

Amelioration Strategies for Silver Diamine Fluoride: Moving from Black to White

Topical cariostatic agents have become a reasonable alternative for managing dental caries in young children. Silver diamine fluoride (SDF) is a practical topical approach to arrest caries and avoid extensive and risky dental treatment. However, the literature demonstrates a parental hesitation towards accepting SDF because of black unaesthetic tooth discolouration following application. The rapid oxidation of ionic silver darkens demineralised tooth structure permanently. In this regard, nano-metallic antimicrobials could augment or substitute for silver, and thereby enhance SDF aesthetic performance. Recently, biomedical research has drawn attention to selenium nanoparticles (SeNPs) due to their antimicrobial, antioxidant, and antiviral potencies. Various in vitro studies have examined the effect of SeNPs on the virulence of bacteria. This narrative review explores practical issues when using SDF and suggests future directions to develop it, focusing on antimicrobial metals. Several methods are described that could be followed to reduce the discolouration concern, including the use of nanoparticles of silver, of silver fluoride, or of selenium or other metals with antimicrobial actions. There could also be value in using remineralising agents other than fluoride, such as NPs of hydroxyapatite. There could be variations made to formulations in order to lower the levels of silver and fluoride in the SDF or even to replace one or both of the silver and fluoride components completely. Moreover, since oxidation processes appear central to the chemistry of the staining, adding SeNPs which have antioxidant actions could have an anti-staining benefit; SeNPs could be used for their antimicrobial actions as well. Future research should address the topic of selenium chemistry to optimise how SeNPs would be used with or in place of ionic silver. Incorporating other antimicrobial metals as nanoparticles should also be explored, taking into account the optimal physicochemical parameters for each of these.

Investigating the structure, solubility, and antibacterial properties of silver- and copper-doped hydroxyapatite

Hydroxyapatite (HA) powders were synthesized by the wet precipitation method in which two experimental compositions were synthesized (10 mol% Ag-HA and Cu-HA) where the CaNO₃ content was partially substituted with AgNO₃ and Cu(NO₃ )₂ . X-ray diffraction (XRD) was employed to characterize changes to the HA structure as the dopants (Cu²⁺ , Ag⁺ ) were incorporated into the materials structure. Energy-dispersive X-ray spectroscopy (EDS) determined confirmed the compositions and found that the Ca/P ratio was 1.63 for the control (HA) while Ag-HA and Cu-HA exhibited (X + Ca)/P ratios of 1.79 and 1.65, respectively. Antibacterial efficacies were evaluated against E. coli and S. aureus, as a function of surface area and incubation time. The more prominent antibacterial effects were observed with both Ag-HA and Cu-HA and the materials antibacterial influence was maintained with respect to time. Ion release studies of each HA composition (15, 30, and 45 days) showed that Cu-HA released significantly more Cu²⁺ (36.1 ± 5.1 mg/L) than Ag⁺ (2.9 ± 1.2 mg/L) from Ag-HA. Analysis of each composition incubated in simulated body fluid (SBF) exhibited surface depositions that are likely calcium phosphate (CaP). Cytocompatibility testing in MC 3T3 Osteoblasts showed slight reductions in cell viability when tested using MTT assay, however cell adhesion studies were positive for each composition.

Silver Nanoparticles: Bactericidal and Mechanistic Approach against Drug Resistant Pathogens

This review highlights the different modes of synthesizing silver nanoparticles (AgNPs) from their elemental state to particle format and their mechanism of action against multidrug-resistant and biofilm-forming bacterial pathogens. Various studies have demonstrated that the AgNPs cause oxidative stress, protein dysfunction, membrane disruption, and DNA damage in bacteria, ultimately leading to bacterial death. AgNPs have also been found to alter the adhesion of bacterial cells to prevent biofilm formation. The benefits of using AgNPs in medicine are, to some extent, counter-weighted by their toxic effect on humans and the environment. In this review, we have compiled recent studies demonstrating the antibacterial activity of AgNPs, and we are discussing the known mechanisms of action of AgNPs against bacterial pathogens. Ongoing clinical trials involving AgNPs are briefly presented. A particular focus is placed on the mechanism of interaction of AgNPs with bacterial biofilms, which are a significant pathogenicity determinant. A brief overview of the use of AgNPs in other medical applications (e.g., diagnostics, promotion of wound healing) and the non-medical sectors is presented. Finally, current drawbacks and limitations of AgNPs use in medicine are discussed, and perspectives for the improved future use of functionalized AgNPs in medical applications are presented.

The elements of life: A biocentric tour of the periodic table

Living systems are built from a small subset of the atomic elements, including the bulk macronutrients (C,H,N,O,P,S) and ions (Mg,K,Na,Ca) together with a small but variable set of trace elements (micronutrients). Here, we provide a global survey of how chemical elements contribute to life. We define five classes of elements: those that are (i) essential for all life, (ii) essential for many organisms in all three domains of life, (iii) essential or beneficial for many organisms in at least one domain, (iv) beneficial to at least some species, and (v) of no known beneficial use. The ability of cells to sustain life when individual elements are absent or limiting relies on complex physiological and evolutionary mechanisms (elemental economy). This survey of elemental use across the tree of life is encapsulated in a web-based, interactive periodic table that summarizes the roles chemical elements in biology and highlights corresponding mechanisms of elemental economy.

Structural and dynamical insights into SilE silver binding from combined analytical probes

Silver has been used for its antimicrobial properties to fight infection for thousands of years. Unfortunately, some Gram-negative bacteria have developed silver resistance causing the death of patients in a burn unit. The genes responsible for silver resistance have been designated as the sil operon. Among the proteins of the sil operon, SilE has been shown to play a key role in bacterial silver resistance. Based on the limited information available, it has been depicted as an intrinsically disordered protein that folds into helices upon silver ion binding. Herein, this work demonstrates that SilE is composed of 4 clearly identified helical segments in the presence of several silver ions. The combination of analytical and biophysical techniques (NMR spectroscopy, CD, SAXS, HRMS, CE-ICP-MS, and IM-MS) reveals that SilE harbors four strong silver binding sites among the eight sites available. We have also further evidenced that SilE does not adopt a globular structure but rather samples a large conformational space from elongated to more compact structures. This particular structural organization facilitates silver binding through much higher accessibility of the involved His and Met residues. These valuable results will advance our current understanding of the role of SilE in the silver efflux pump complex mechanism and will help in the future rational design of inhibitors to fight bacterial silver resistance.

The effect of disinfectants and antiseptics on co- and cross-selection of resistance to antibiotics in aquatic environments and wastewater treatment plants

The outbreak of the SARS-CoV-2 pandemic led to increased use of disinfectants and antiseptics (DAs), resulting in higher concentrations of these compounds in wastewaters, wastewater treatment plant (WWTP) effluents and receiving water bodies. Their constant presence in water bodies may lead to development and acquisition of resistance against the DAs. In addition, they may also promote antibiotic resistance (AR) due to cross- and co-selection of AR among bacteria that are exposed to the DAs, which is a highly important issue with regards to human and environmental health. This review addresses this issue and provides an overview of DAs structure together with their modes of action against microorganisms. Relevant examples of the most effective treatment techniques to increase the DAs removal efficiency from wastewater are discussed. Moreover, insight on the resistance mechanisms to DAs and the mechanism of DAs enhancement of cross- and co-selection of ARs are presented. Furthermore, this review discusses the impact of DAs on resistance against antibiotics, the occurrence of DAs in aquatic systems, and DA removal mechanisms in WWTPs, which in principle serve as the final barrier before releasing these compounds into the receiving environment. By recognition of important research gaps, research needs to determine the impact of the majority of DAs in WWTPs and the consequences of their presence and spread of antibiotic resistance were identified.

Influence of silver ion release on the inactivation of antibiotic resistant bacteria using light-activated silver nanoparticles

The widespread increase in antibiotic resistance (AR), in an extensive range of microorganisms, demands the development of alternative antimicrobials with novel non-specific low-mutation bacterial targets. Silver nanoparticles (AgNPs) and photosensitizers (PSs) are promising antimicrobial agents with broad-spectrum activity and low tendency for antimicrobial resistance development. Herein, we investigated the light-mediated oxidation of AgNPs for accelerated release of Ag⁺ in the antibacterial synergy of PS-AgNP conjugates using protoporphyrin IX (PpIX) as a PS. Also, the influence of polyethyleneimine (PEI) coated AgNPs in promoting antibacterial activity was examined. We synthesized, characterized and tested the antimicrobial effect of three nanoparticles: AgNPs, PpIX-AgNPs, and PEI-PpIX-AgNPs against a methicillin-resistant Staphylococcus aureus strain (MRSA) and a wild-type multidrug resistant (MDR) E. coli. PpIX-AgNPs were the most effective material achieving >7 log inactivation of MRSA and MDR E. coli. The order of bacterial log inactivation was PpIX-AgNPs > PEI-PpIX-AgNPs > AgNPs. This order correlates with the trend of Ag⁺ concentration released by the NPs (PpIX-AgNPs > PEI-PpIX-AgNPs > AgNPs). Our study confirms a synergistic effect between PpIX and AgNPs in the inactivation of AR pathogens with about 10-fold increase in inactivation of ARB relative to AgNPs only. The concentration of Ag⁺ released from NPs determined the log inactivation of MRSA and MDR E. coli more than either the phototoxic effect or the electrostatic interaction promoted by surface charge of nanoparticles with bacteria cells. All NPs showed negligible cytotoxicity to mammalian cells at the bacterial inhibitory concentration after 24 h exposure. These observations confirm the crucial role of optimized Ag⁺ release for enhanced performance of AgNP-based antimicrobials against AR pathogens.

Synthesis and Characterization of Ligand-Stabilized Silver Nanoparticles and Comparative Antibacterial Activity against E. coli

Silver is a well-established antimicrobial agent. Conjugation of organic ligands with silver nanoparticles has been shown to create antimicrobial nanoparticles with improved pharmacodynamic properties and reduced toxicity. Twelve novel organic ligand functionalized silver nanoparticles (AgNPs) were prepared via a light-controlled reaction with derivatives of benzothiazole, benzoxazine, quinazolinone, 2-butyne-1,4-diol, 3-butyne-1-ol, and heptane-1,7-dioic. UV-vis, Fourier-transform infrared (FTIR) spectroscopy, and energy-dispersive X-ray (EDAX) analysis were used to confirm the successful formation of ligand-functionalized nanoparticles. Dynamic light scattering (DLS) revealed mean nanoparticle diameters between 25 and 278 nm. Spherical and nanotube-like morphologies were observed using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Seven of the twelve nanoparticles exhibited strong antimicrobial activity and five of the twelve demonstrated significant antibacterial capabilities against E. coli in a zone-of-inhibition assay. The synthesis of functionalized silver nanoparticles such as the twelve presented is critical for the further development of silver-nanoconjugated antibacterial agents.

Correlation notice on the electrochemical dealloying and antibacterial properties of gold-silver alloy nanoparticles

Galvanic replacement reaction was used in the synthesis of bimetallic gold-silver alloy nanoparticles (Au-Ag NPs), where pre-synthesized Ag nanoparticles-polyvinylpyrrolidone (AgNPs-PVP) were used to reduce the aryldiazonium tetrachloroaurate(III) salt in water. TEM images and EDS elemental analysis showed the formation of spherical Au-Ag NPs with sizes of 12.8 ± 4.9 nm and 25.6 ± 14.4 nm for corresponding Au-Ag ratios and termed as Au_0.91Ag_0.09 and Au_0.79Ag_0.21, respectively, with different concentrations of the gold precursor. The hydrodynamic sizes measured using dynamic light scattering are 46.4 nm and 74.8 nm with corresponding zeta potentials of - 44.56 and - 25.09 mV in water, for Au_0.91Ag_0.09 and Au_0.79Ag_0.21 respectively. Oxidative leachability of Ag ion studies from the starting AgNPs-PVP in 1 M NaCl showed a significant decrease in the plasmon peak after 8 h, indicating the complete dissolution of Ag ions, however, there is enhanced oxidation resistivity of Ag from Au-Ag NPs even after 24 h. Electrochemical studies on glassy carbon electrodes displayed a low oxidation peak in aqueous solutions of 20 mM KCl at 0.16 V and KNO₃ at 0.33 V vs. saturated calomel electrode (SCE). We studied the antibacterial activity of Au-Ag alloy nanoparticles against gram-positive Staphylococcus aureus, Staphylococcus epidermidis, Enterococcus faecalis, and gram-negative Escherichia coli, Salmonella typhimurium, and Pseudomonas aeruginosa. Our findings demonstrated superior antibacterial activity of Au-Ag NPs compared with AgNPs-PVP. Moreover, the nanoparticles inhibited the S. epidermidis biofilm formation.