Cyclodextrin based novel drug delivery systems

Nystatin:β-cyclodextrin and chlorhexidine:β-cyclodextrin mucoadhesive hydrogels for site-specific buccal applications

BACKGROUND

This study aimed to develop and analyze nystatin:β-cyclodextrin and chlorhexidine:β-cyclodextrin mucoadhesive hydrogels.

MATERIALS & METHODS

Hydrogels were characterized by in vitro and ex vivo analyses, and antifungal activity against Candida albicans.

RESULTS

The hydrogel showed high adhesiveness and retention (83.37 ± 2.05%) to the porcine oral mucosa. The drug release from complexed nystatin and chlorhexidine hydrogels was 1.5 (95 µg/cm2) and 4.0 times higher (800 µg/cm2) than non-complexed drugs. Rheological studies indicated the prevalence of elastic behavior of the formulations. Ex vivo permeation using porcine mucosa showed retention on the oral mucosa. Hydrogels with nystatin and chlorhexidine inclusion complex showed inhibition percentages of 88.87% and 91.57%, respectively, and median inhibition zones of 8 mm.

CONCLUSION

Mucoadhesive hydrogels with inclusion complex are promising for oral lesions with greater retention at the treatment site.

Cross-Linked Cyclodextrin-Based Nanoparticles as Drug Delivery Vehicles: Synthesis Strategy and Degradation Studies

In this work, we report on the synthesis and characterization of cyclodextrin-based nanocarriers, intended as new biogenic and biodegradable drug-delivery agents. Specifically, β-cyclodextrins were covalently cross-linked by carbonyl linkages using carbonyldiimidazole (CDI) and were colloidally stabilized via PEGylation to form β-CD-CO-PEG nanoparticles termed CD-CO NPs. The optimized synthesis results in size-controlled nanoparticles with a narrow particle size distribution and a hydrodynamic diameter around 200-300 nm in water and 100-160 nm as dried powder as observed by scanning electron microscopy. CD-CO nanoparticles are promising drug delivery carriers as they offer an intrinsic pore system originating from the β-cyclodextrin building units and an additional intraparticle pore space created by cross-linking these β-cyclodextrin units. We demonstrate the biodegradability of these materials and show exemplarily their drug delivery potential using two different model cargos. Time-based fluorescence release measurements in cuvette established a stable cargoretention of the fluorescent dye Hoechst at neutral pH, and in contrast, an efficient stimuli-responsive release at pH 5, accompanied by a fast nanoparticle degradation. This cargo-release behavior at low pH is further observed with a small drug molecule, the hydrophobic necrosulfonamide, when followed with infrared spectroscopy. Finally, the drug-delivery potential of these new nanoparticles was established by following the cell uptake of covalently labeled CD-CO nanoparticles into HeLa cells with in vitro fluorescence microscopy, whereby the membrane-permeable Hoechst dye was delivered time-delayed in comparison to free Hoechst dye. In summary, our work aims to contribute to the design and understanding of cyclodextrin-based nanocarriers as a promising drug delivery platform.

Innovative Nano Delivery Systems for Astaxanthin: Enhancing Stability, Bioavailability, and Targeted Therapeutic Applications

Astaxanthin (AST), as a natural antioxidant, has broad application prospects in medicine and health products. However, its highly unsaturated structure and significant lipophilic characteristics limit its dispersibility and bioavailability, thereby restricting its application in food, medicines, and nutraceuticals. To overcome these limitations, researchers have proposed the use of nano delivery systems. This review summarizes various nanocarriers, including liposomes, nanostructured lipid carriers, nanoparticles, and others, and analyzes their advantages in enhancing the solubility, stability, and bioavailability of AST. Furthermore, the study focuses on targeted delivery systems achieved through biomolecular modifications, which enable precise delivery of AST to specific cells or tissues, enhancing therapeutic effects. Additionally, smart-responsive delivery systems, such as pH-responsive and light-sensitive systems, are also discussed, showing their immense potential in precise release and targeted therapy. These findings provide new perspectives for the precise nutrition and clinical applications of AST. Future research should further optimize the design of nanocarriers to enable broader applications.

Cyclodextrin Drugs in Liposomes: Preparation and Application of Anticancer Drug Carriers

Cyclodextrin complexes have been widely used in pharmaceutical applications, but disadvantages such as the rapid clearance of cyclodextrins from the blood stream after in vivo administration or their replacement by other molecules in the biological medium with higher luminal affinity for cyclodextrins limit the application of cyclodextrins as drug carriers. Liposome-encapsulated hydrophobic drugs have low and unstable drug loading rates. Drug-in-CD-in-liposome (DCL), which encapsulate cyclodextrin inclusion complexes into liposomes, combine the advantages of both delivery systems, can effectively avoid the leakage and rapid release of lipophilic drugs in the lipid bilayer, and help to maintain the integrity of liposomes. This paper focuses on the preparation method, characterization and application of DCL, with a view to providing methods and references for the research and application of DCL technology.

Biopolymeric Inhalable Dry Powders for Pulmonary Drug Delivery

Natural and synthetic biopolymers are gaining popularity in the development of inhaled drug formulations. Their highly tunable properties and ability to sustain drug release allow for the incorporation of attributes not achieved in dry powder inhaler formulations composed only of micronized drugs, standard excipients, and/or carriers. There are multiple physiological barriers to the penetration of inhaled drugs to the epithelial surface, such as the periciliary layer mucus mesh, pulmonary macrophages, and inflammation and mucus compositional changes resulting from respiratory diseases. Biopolymers may facilitate transport to the epithelial surface despite such barriers. A variety of categories of biopolymers have been assessed for their potential in inhaled drug formulations throughout the research literature, ranging from natural biopolymers (e.g., chitosan, alginate, hyaluronic acid) to those synthesized in a laboratory setting (e.g., polycaprolactone, poly(lactic-co-glycolic acid)) with varying structures and compositions. To date, no biopolymers have been approved as a commercial dry powder inhaler product. However, advances may be possible in the treatment of respiratory diseases and infections upon further investigation and evaluation. Herein, this review will provide a thorough foundation of reported research utilizing biopolymers in dry powder inhaler formulations. Furthermore, insight and considerations for the future development of dry powder formulations will be proposed.

Cyclodextrins and their applications in pharmaceutical and related fields

This chapter presents an overall account of cyclodextrins (CDs) with a brief description of the history, classification, and properties of these macromolecules. CDs act as complexing agents for drugs to form CD-drug inclusion complexes by various techniques. These complexes lead to the modification of the physicochemical properties of drugs to make them more soluble, chemically, and photochemically stable, and less toxic. It focuses in detail on various pharmaceutical uses of CDs and their derived forms in drug solubility, bioavailability, drug stability, drug delivery, and drug safety which have been specifically highlighted. The role of CDs and derivatives as excipients in the drug formulation of solid dosage forms, parenteral dosage forms, and anticancer drugs has been emphasized. Some other applications of CDs in cosmetics, environmental protection, food technology, and analytical methods have been described.

Cyclodextrin in drug delivery: Exploring scaffolds, properties, and cutting-edge applications

Cyclodextrins (CDs) are unique cyclic compounds that can form inclusion complexes via host-guest complexation with a wide range of molecules, thereby altering their physicochemical properties. These molecules offer the formation of inclusion complexes without the formation of covalent bonds, making them suitable for a variety of applications in pharmaceutical and biomedical fields. Due to their supramolecular host-guest properties, CDs are being utilized in the fabrication of biomaterials, metal-organic frameworks, and nano-drug carriers. Additionally, CDs in combination with biomolecules are biocompatible and can deliver nano to macromolecules at the site of drug actions. However, the availability of free hydroxyl groups and a simple crosslinking process for supramolecular fabrication show immense opportunities for researchers in the field of tissue engineering and biomedical applications. In this review article, we have covered the historical development, various types of chemical frameworks, unique chemical and physical properties, and important applications of CDs in drug delivery and biomedical sciences.

Appraisal terpenoids rich Boswellia carterri ethyl acetate extract in binary cyclodextrin oligomer nano complex for improving respiratory distress

Boswellia carterii (BC) resins plants have a long historical background as a treatment for inflammation, as indicated by information originating from multiple countries. Twenty-seven diterpenoids have been identified in ethyl acetate and total methanol BC, comprising seventeen boscartins of the cembrane-type diterpenoids and ten boscartols of the prenylaromadendrane-type diterpenoids. Moreover, twenty-one known triterpenoids have also been found, encompassing nine tirucallane-type, six ursane-type, four oleanane-type, and two lupane-type. The cembrane-type diterpenoids hold a significant position in pharmaceutical chemistry and related industries due to their captivating biological characteristics and promising pharmacological potentials. Extraction of BC, creation and assessment of nano sponges loaded with either B. carterii plant extract or DEX, are the subjects of our current investigation. With the use of ultrasound-assisted synthesis, nano sponges were produced. The entrapment efficiency (EE%) of medications in nano sponges was examined using spectrophotometry. Nano sponges were characterized using a number of methods. Within nano sponges, the EE% of medicines varied between 98.52 ± 0.07 and 99.64 ± 1.40%. The nano sponges' particle sizes varied from 105.9 ± 15.9 to 166.8 ± 26.3 nm. Drugs released from nano sponges using the Korsmeyer-Peppas concept. In respiratory distressed rats, the effects of BC plant extract, DEX salt and their nano formulations (D1, D5, P1 and P1), were tested. Treatment significantly reduced ICAM-1, LTB4, and ILβ 4 levels and improved histopathologic profiles, when compared to the positive control group. Boswellia extract and its nano sponge formulation P1 showed promising therapeutic effects. The effect of P1 may be due to synergism between both the extract and the formulation. This effect was achieved by blocking both ICAM-1 and LTB4 pathways, therefore counteracting the effects of talc powder.

Synergistic applications of cyclodextrin-based systems and metal-organic frameworks in transdermal drug delivery for skin cancer therapy

This review article explores the innovative field of eco-friendly cyclodextrin-based coordination polymers and metal-organic frameworks (MOFs) for transdermal drug delivery in the case of skin cancer therapy. We critically examine the significant advancements in developing these nanocarriers, with a focus on their unique properties such as biocompatibility, targeted drug release, and enhanced skin permeability. These attributes are instrumental in addressing the limitations inherent in traditional skin cancer treatments and represent a paradigm shift towards more effective and patient-friendly therapeutic approaches. Furthermore, we discuss the challenges faced in optimizing the synthesis process for large-scale production while ensuring environmental sustainability. The review also emphasizes the immense potential for clinical applications of these nanocarriers in skin cancer therapy, highlighting their role in facilitating targeted, controlled drug release which minimizes systemic side effects. Future clinical applications could see these nanocarriers being customized to individual patient profiles, potentially revolutionizing personalized medicine in oncology. With further research and clinical trials, these nanocarriers hold the promise of transforming the landscape of skin cancer treatment. With this study, we aim to provide a comprehensive overview of the current state of research in this field and outline future directions for advancing the development and clinical application of these innovative nanocarriers.

Host-Guest Interactions of Caffeic Acid Phenethyl Ester with β-Cyclodextrins: Preparation, Characterization, and In Vitro Antioxidant and Antibacterial Activity

The aim of this study is to improve the solubility, chemical stability, and in vitro biological activity of caffeic acid phenethyl ester (CAPE) by forming inclusion complexes with β-cyclodextrin (β-CD) and hydroxypropyl-β-cyclodextrin (Hβ-CD) using the solvent evaporation method. The CAPE contents of the produced complexes were determined, and the complexes with the highest CAPE contents were selected for further characterization. Detailed characterization of inclusion complexes was performed by using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and electrospray ionization-mass spectrometry (ESI-MS). pH and thermal stability studies showed that both selected inclusion complexes exhibited better stability compared to free CAPE. Moreover, their antimicrobial activities were evaluated against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) for the first time. According to the broth dilution assay, complexes with the highest CAPE content (10C/β-CD and 10C/Hβ-CD) exhibited considerable growth inhibition effects against both bacteria, 31.25 μg/mL and 62.5 μg/mL, respectively; contrarily, this value for free CAPE was 500 μg/mL. Furthermore, it was determined that the in vitro antioxidant activity of the complexes increased by about two times compared to free CAPE.

Nanosponge: A promising and intriguing strategy in medical and pharmaceutical Science

The complicated chemical reactions involved in the production of the newer drug delivery systems have mainly impeded efforts to build successful targeted drug delivery systems for a prolonged duration of time. Nanosponges, a recently created colloidal system, have the potential to overcome issues with medication toxicity, decreased bioavailability, and drug release over a wide area because they can be modified to work with both hydrophilic and hydrophobic types of drugs. Nanosponges are small sized with a three-dimensional network having a porous cavity. They can be prepared easily by crosslinking cyclodextrins with different compounds. Due to Cyclodextrin's outstanding biocompatibility, stability, and safety, a number of Cyclodextrin-based drug delivery systems have been developed promptly. The nanosponge drug delivery system possesses various applications in various ailments such as cancer, autoimmune diseases, theranostic applications, enhanced bioavailability, stability, etc. This review elaborates on benefits and drawbacks, preparation techniques, factors affecting their preparation, characterization techniques, applications, and most current developments in nanosponges.

Cyclodextrin-based nanosponges as promising carriers for active pharmaceutical ingredient

Effective drug distribution at the intended or particular location is a critical issue that researchers are now dealing. Nanosponges have significantly increased in importance in medication delivery using nanotechnology in recent years. An important step toward solving these problems has been the development of nanosponges. Recently created and proposed for use in drug delivery, nanosponge is a unique type of hyper-crosslinked polymer-based colloidal structures made up of solid nanoparticles with colloidal carriers. Nanosponges are solid porous particles that may hold pharmaceuticals and other actives in their nanocavities. They can be made into dosage forms for oral, parenteral, topical, or inhalation use. The targeted distribution of drugs in a regulated manner is greatly aided by nanosponge. The utilization of nanosponges, their benefits, their production processes, the polymers they are made of, and their characterization have all been covered in this review article.

Cyclodextrin Inclusion Complexes for Improved Drug Bioavailability and Activity: Synthetic and Analytical Aspects

Many active pharmaceutical ingredients show low oral bioavailability due to factors such as poor solubility and physical and chemical instability. The formation of inclusion complexes with cyclodextrins, as well as cyclodextrin-based polymers, nanosponges, and nanofibers, is a valuable tool to improve the oral bioavailability of many drugs. The microencapsulation process modifies key properties of the included drugs including volatility, dissolution rate, bioavailability, and bioactivity. In this context, we present relevant examples of the stabilization of labile drugs through the encapsulation in cyclodextrins. The formation of inclusion complexes with drugs belonging to class IV in the biopharmaceutical classification system as an effective solution to increase their bioavailability is also discussed. The stabilization and improvement in nutraceuticals used as food supplements, which often have low intestinal absorption due to their poor solubility, is also considered. Cyclodextrin-based nanofibers, which are polymer-free and can be generated using environmentally friendly technologies, lead to dramatic bioavailability enhancements. The synthesis of chemically modified cyclodextrins, polymers, and nanosponges based on cyclodextrins is discussed. Analytical techniques that allow the characterization and verification of the formation of true inclusion complexes are also considered, taking into account the differences in the procedures for the formation of inclusion complexes in solution and in the solid state.

Enhancing the Drug-Like Profile of a Potent Peptide PACE4 Inhibitor by the Formation of a Host-Guest Inclusion Complex with β-Cyclodextrin

The enzyme PACE4 has been validated as a promising therapeutic target to expand the range of prostate cancer (PCa) treatments. In recent years, we have developed a potent peptidomimetic inhibitor, namely, compound C23 (Ac-(DLeu)LLLRVK-4-amidinobenzylamide). Like many peptides, C23 suffers from an unfavorable drug-like profile which, despite our efforts, has not yet benefited from the usual SAR studies. Hence, we turned our attention toward a novel formulation strategy, i.e., the use of cyclodextrins (CDs). CDs can benefit compounds through the formation of "host-guest" complexes, shielding the guest from degradation and enhancing biological survival. In this study, a series of βCD-C23 complexes have been generated and their properties evaluated, including potency toward the enzyme in vitro, a cell-based proliferation assay, and stability in plasma. As a result, a new βCD-formulated lead compound has been identified, which, in addition to being more soluble and more potent, also showed an improved stability profile.

Host Dynamics under General-Purpose Force Fields

Macrocyclic hosts as prototypical receptors to gaseous and drug-like guests are crucial components in pharmaceutical research. The external guests are often coordinated at the center of these macromolecular containers. The formation of host-guest coordination is accompanied by the broken of host-water and host-ion interactions and sometimes also involves some conformational rearrangements of the host. A balanced description of various components of interacting terms is indispensable. However, up to now, the modeling community still lacks a general yet detailed understanding of commonly employed general-purpose force fields and the host dynamics produced by these popular selections. To fill this critical gap, in this paper, we profile the energetics and dynamics of four types of popular macrocycles, including cucurbiturils, pillararenes, cyclodextrins, and octa acids. The presented investigations of force field definitions, refitting, and evaluations are unprecedently detailed. Based on the valuable observations and insightful explanations, we finally summarize some general guidelines on force field parametrization and selection in host-guest modeling.

Review of the Role of Nanotechnology in Overcoming the Challenges Faced in Oral Cancer Diagnosis and Treatment

Throughout the world, oral cancer is a common and aggressive malignancy with a high risk of morbidity, mortality, and recurrence. The importance of early detection in cancer prevention and disease treatment cannot be overstated. Conventional therapeutic strategies have minor difficulties but considerable side effects and unfavourable consequences in clinical applications. Hence, there is a requirement for effective ways for early detection and treatment of oral cancer. At present, numerous forms of nanoparticles have piqued researchers' interest as a potentially useful tool for diagnostic probes and medicinal devices. Because of their inherent physicochemical properties and customizable surface modification, they are able to circumvent some of restrictions and accomplish the intended diagnostic and therapeutic impact. Nanotechnology is a unique field that has revolutionised the industry and is paving the way for new treatments for oral cancer. It can help with a better diagnosis with less harmful substances and is setting current guidelines for treatment. The use of nanotechnology in cancer diagnosis, therapy, and care improves clinical practise dramatically. The different types of nanoparticles that have been developed for the diagnosis and therapy of oral cancers will be covered in this study. The difficulties and potential uses of nanoparticles in the treatment and diagnosis of oral cancer are then highlighted. In order to emphasise existing difficulties and potential remedies for oral cancer, a prospective view of the future is also provided.

Imatinib-Functionalized Galactose Hydrogels Loaded with Nanohydroxyapatite as a Drug Delivery System for Osteosarcoma: In Vitro Studies

This study reports an impact of structure (XRPD, FT-IR) and surface morphology (SEM-EDS) of imatinib-functionalized galactose hydrogels, loaded and unloaded with nHAp, on osteosarcoma cell (Saos-2 and U-2OS) viability, levels of free oxygen radicals, and nitric oxide, levels of BCL-2, p53, and caspase 3 and 9, as well as glycoprotein-P activity. It was investigated how the rough surface of the crystalline hydroxyapatite-modified hydrogel affected amorphous imatinib (IM) release. The imatinib drug effect on cell cultures has been demonstrated in different forms of administration-directly to the culture or the hydrogels. Administration of IM and hydrogel composites could be expected to reduce the risk of multidrug resistance development by inhibiting P_gp.

Encapsulation of Clofazimine by Cyclodextran: Preparation, Characterization, and In Vitro Release Properties

This study aimed to evaluate and compare the efficacy of cyclodextrans (CIs) and cyclodextrins (CDs) in improving the water solubility of a poorly water-soluble drug, clofazimine (CFZ). Among the evaluated CIs and CDs, CI-9 exhibited the highest percentage of drug inclusion and the highest solubility. Additionally, CI-9 showed the highest encapsulation efficiency, with a CFZ:CI-9 molar ratio of 0.2:1. SEM analysis indicated successful formation of inclusion complexes CFZ/CI and CFZ/CD, accounting for the rapid dissolution rate of the inclusion complex. Moreover, CFZ in CFZ/CI-9 demonstrated the highest drug release ratio, reaching up to 97%. CFZ/CI complexes were found to be an effective means of protecting the activity of CFZ against various environmental stresses, particularly UV irradiation, compared to free CFZ and CFZ/CD complexes. Overall, the findings provide valuable insights into designing novel drug delivery systems based on the inclusion complexes of CIs and CDs. However, further studies are needed to investigate the effects of these factors on the release properties and pharmacokinetics of encapsulated drugs in vivo, in order to ensure the safety and efficacy of these inclusion complexes. In conclusion, CI-9 is a promising candidate for drug delivery systems, and CFZ/CI complexes could be a potential formulation strategy for the development of stable and effective drug products.

Preparation Strategies of the Anti-Mycobacterial Drug Bedaquiline for Intrapulmonary Routes of Administration

Mycobacterium tuberculosis (M.tb) has infected one-quarter of the world's population and led to the deaths of 1.6 million individuals in 2021 according to estimates from the World Health Organization. The rise in prevalence of multidrug-resistant and extensively drug-resistant M.tb strains coupled with insufficient therapies to treat such strains has motivated the development of more effective treatments and/or delivery modalities. Bedaquiline, a diarylquinoline antimycobacterial agent, effectively targets mycobacterial ATP synthase but may lead to systemic complications upon oral delivery. Targeted delivery of bedaquiline to the lungs represents an alternative strategy to harness the sterilizing benefits of the drug against M.tb while mitigating off-target side effects. Two pulmonary delivery modalities were developed herein, including dry powder inhalation and liquid instillation. Despite bedaquiline's poor water solubility, spray drying was performed in predominantly aqueous conditions (≥80%) to avoid a closed-loop, inert system. Aerosols of spray-dried bedaquiline with L-leucine excipient outperformed spray-dried bedaquiline alone, demonstrating superior fine particle fraction metrics (~89% of the emitted dose below <5 µm), suitable for inhalation therapies. Furthermore, the use of a 2-hydroxypropyl-β-cyclodextrin excipient allowed a molecular dispersion of bedaquiline in an aqueous solution for liquid instillation. Both delivery modalities were successfully administered to Hartley guinea pigs for pharmacokinetic analysis and were well-tolerated by the animals. Intrapulmonary liquid delivery of bedaquiline led to adequate serum absorption and appropriate peak serum concentrations of the drug. The liquid formulation was superior in systemic uptake compared to the powder formulation. The predominant route via which M.tb bacilli enter the body is aerosol droplets that are deposited onto airway surfaces. For this reason, we believe that further studies should focus on inhalation or intrapulmonary therapies that target the site of entry and primary site of infection for M.tb.

Current advances in nanodrug delivery systems for malaria prevention and treatment

Malaria is a life-threatening, blood-borne disease with over two hundred million cases throughout the world and is more prevalent in Sub-Saharan Africa than anywhere else in the world. Over the years, several treatment agents have been developed for malaria; however, most of these active pharmaceutical ingredients exhibit poor aqueous solubility and low bioavailability and may result in drug-resistant parasites, thus increasing malaria cases and eventually, deaths. Factors such as these in therapeutics have led to a better appreciation of nanomaterials. The ability of nanomaterials to function as drug carriers with a high loading capacity and targeted drug delivery, good biocompatibility, and low toxicity renders them an appealing alternative to conventional therapy. Nanomaterials such as dendrimers and liposomes have been demonstrated to be capable of enhancing the efficacy of antimalarial drugs. This review discusses the recent development of nanomaterials and their benefits in drug delivery for the potential treatment of malaria.

Insight on nano drug delivery systems with targeted therapy in treatment of oral cancer

Oral cancer is a type of cancer that develops in the mouth and is one of the deadliest malignancies in the world. Currently surgical, radiation therapy, and chemotherapy are most common treatments. Better treatment and early detection strategies are required. Chemotherapeutic drugs fail frequently due to toxicity and poor tumor targeting. There are high chances of failure of chemotherapeutic drugs due to toxicity. Active, passive, and immunity-targeting techniques are devised for tumor-specific activity. Nanotechnology-based drug delivery systems are the best available solution and important for precise targeting. Nanoparticles, liposomes, exosomes, and cyclodextrins are nano-based carriers for drug delivery. Nanotechnology is being used to develop new techniques such as intratumoral injections, microbubble mediated ultrasonic therapy, phototherapies, and site-specific delivery. This systematic review delves into the details of such targeted and nano-based drug delivery systems in order to improve patient health and survival rates in oral cancer.

Improving Lurasidone Hydrochloride's Solubility and Stability by Higher-Order Complex Formation with Hydroxypropyl-β-cyclodextrin

The biopharmaceutical classification system groups low-solubility drugs into two groups: II and IV, with high and low permeability, respectively. Most of the new drugs developed for common pathologies present solubility issues. This is the case of lurasidone hydrochloride-a drug used for the treatment of schizophrenia and bipolar depression. Likewise, the stability problems of some drugs limit the possibility of preparing them in liquid pharmaceutical forms where hydrolysis and oxidation reactions can be favored. Lurasidone hydrochloride presents the isoindole-1,3-dione ring, which is highly susceptible to alkaline hydrolysis, and the benzisothiazole ring, which is susceptible to a lesser extent to oxidation. Herein, we propose to study the increase in the solubility and stability of lurasidone hydrochloride by the formation of higher-order inclusion complexes with hydroxypropyl-β-cyclodextrin. Several stoichiometric relationships were studied at between 0.5 and 3 hydroxypropyl-β-cyclodextrin molecules per drug molecule. The obtained products were characterized, and their solubility and stability were assessed. According to the obtained results, the formation of inclusion complexes dramatically increased the solubility of the drug, and this increased with the increase in the inclusion ratio. This was associated with the loss of crystalline state of the drug, which was in an amorphous state according to infrared spectroscopy, calorimetry, and X-ray analysis. This was also correlated with the stabilization of lurasidone by the cyclodextrin inhibiting its recrystallization. Phase solubility,¹H-NMR, and docking computational characterization suggested that the main stoichiometric ratio was 1:1; however, we cannot rule out a 1:2 ratio, where a second cyclodextrin molecule could bind through the isoindole-1,3-dione ring, improving its stability as well. Finally, we can conclude that the formation of higher-order inclusion complexes of lurasidone with hydroxypropyl-β-cyclodextrin is a successful strategy to increase the solubility and stability of the drug.

Interactions between β-cyclodextrin as a carrier for anti-cancer drug delivery: a molecular dynamics simulation study

A series of molecular dynamics simulations were performed on 5-fluorouracil (5-Fu), Alendronate (Ald), and Temozolomide (TMZ) anticancer drugs in the presence and absence of β-cyclodextrin (βCD) as a carrier. Thermodynamic investigations showed that the van der Waals interaction energy was dominant in loading all drugs inside the βCD cavity. The sum of the interaction energies illustrated that the highest affinity was related to Ald (-136.5 kJ/mol), which in turn was due to the presence of bulky and charged atoms of phosphorus and oxygen, although TMZ (-115.92 kJ/mol) showed a very high affinity as well. At the same time, the hydrogen bond analysis also represented that Ald had the most hydrogen bond (1.97) with the highest half-life (3.13 ps) with βCD. Investigation of the root mean fluctuation (RMSF) indicated that all the drugs had a relatively rigid structure and maintain this rigidity during loading in the βCD cavity, and in the meantime, Ald was slightly more flexible than 5-Fu and TMZ. The area of ​the primary hydroxyl rim decreased in all drug-containing systems, which in turn was caused by the attractive interaction of drugs with oxygens in the primary hydroxyl rim. Especially for those drugs that were able to penetrate to the end of the primary hydroxyl rim of the βCD, that means TMZ and 5-Fu. Meanwhile, due to the lack of Ald penetration to the end of the primary hydroxyl rim, the area change in the Ald-containing system was less than in the two others.Communicated by Ramaswamy H. Sarma.

Nanosponges- Versatile Platform as Drug Carrier

BACKGROUND

Recently, nano-drug delivery systems have become an integral part of the most novel drug delivery systems and have gained considerable importance owing to various advantages such as carriers for poorly soluble drugs, targeting molecules at the desired site, protection from degradation etc. Objective: One of the most studied areas of nanotechnology is nanosponges. The objective of this review was to extensively summarize the various strategies for the preparation, characterization and applications of nanosponges.

METHODS

In the current mini-review, we conducted a systemic search of the literature and patent inventions focusing on nanosponges. The summary of the search was inclusive of various aspects of nanosponges, such as drug characteristics to be considered while incorporating in nanosponges, other crucial additives during formulation of nanosponges, methods of preparation, characterization and applications of nanosponges in pharmaceuticals.

RESULTS

Nanosponges are nanocarriers for both lipophilic and hydrophilic drugs. These are prepared by different methods such as emulsion-solvent evaporation, solvent method, melting method, ultrasound assisted method etc., and all these methods were less time consuming, more economical and evaluated by sophisticated techniques available for routine analysis. These are among the most feasible alternative to address several formulation difficulties associated with the physicochemical properties of the drug. The porous nature and small particle size are vital properties of the nanosponges that contribute crucially to correcting the drawbacks of the drug. The properties of the nanosponges can be enhanced when combined with cyclodextrins. Extensive research work has been carried out in past to explore cyclodextrin based nanosponges. Besides, it is also used for smart targeting of tumors and for drug release in a sustainable pattern. Nanosponges can be prepared by simple methods. These can be tuned to release the drug by different routes so as to achieve the maximum benefits of the drug.

CONCLUSION

Huge amount of research has been carried out on nanosponges as drug carrier. The method of preparation and characterization of nanosponges are quite economical and routinely available. Owing to potential benefits and probable applications, these can be used as efficient carriers for certain drugs. The authors expect that the current review will guide the investigation of the nanosponges as nanodrug delivery systems.

Alternative Excipients for Protein Stabilization in Protein Therapeutics: Overcoming the Limitations of Polysorbates

Given their safety and efficiency in protecting protein integrity, polysorbates (PSs) have been the most widely used excipients for the stabilization of protein therapeutics for years. In recent decades, however, there have been numerous reports about visible or sub-visible particles in PS-containing biotherapeutic products, which is a major quality concern for parenteral drugs. Alternative excipients that are safe for parenteral administration, efficient in protecting different protein drugs against various stress conditions, effective in protein stabilization in high-concentrated liquid formulations, stable under the storage conditions for the duration of the product's shelf-life, and compatible with other formulation components and the primary packaging are highly sought after. The aim of this paper is to review potential alternative excipients from different families, including surfactants, carbohydrate- and amino acid-based excipients, synthetic amphiphilic polymers, and ionic liquids that enable protein stabilization. For each category, important characteristics such as the ability to stabilize proteins against thermal and mechanical stresses, current knowledge related to the safety profile for parenteral administration, potential interactions with other formulation components, and primary packaging are debated. Based on the provided information and the detailed discussion thereof, this paper may pave the way for the identification or development of efficient excipients for biotherapeutic protein stabilization.

β-Cyclodextrin-Grafted Chitosan Enhances Intestinal Drug Absorption and Its Preliminary Mechanism Exploration

β-Cyclodextrin (CD) and chitosan (CS) have attracted great attention due to their unique properties and structures. β-Cyclodextrin-grafted chitosan (CD-CS) has been widely used as a drug carrier to prepare nano-formulations for drug delivery. However, few researches have been conducted to investigate the effect of CD-CS as an excipient on cellular uptake and intestinal absorption. Herein, Caco-2 cells were used to investigate the influence of CD-CS on cellular uptake. The MTT assay showed that CD-CS was non-toxic to Caco-2 cells in concentrations ranging from 15.62 to 125 μg/mL. Confocal laser microscopy and flow cytometry measurements indicated that the uptake ability of Caco-2 cells was significantly enhanced after being treated with CD-CS at a concentration of 31.25 μg/mL or incubation for 0.5 h, and the uptake enhancement gradually increased with increasing CD-CS concentration and incubation time. The Caco-2 monolayer cell model and the everted intestinal sac method were employed to preliminarily explore the mechanism of the improved intestinal absorption. The results demonstrated that CD-CS might open the tight junctions and enhance the clathrin-dependent endocytosis, macro-pinocytosis, and phagocytosis of the intestinal epithelial cells. Such findings can serve as references and inspiration for the design of absorption enhancers.

Succinimido–Ferrocidiphenol Complexed with Cyclodextrins Inhibits Glioblastoma Tumor Growth In Vitro and In Vivo without Noticeable Adverse Toxicity

SuccFerr (N-[4-ferrocenyl,5-5-bis (4-hydroxyphenyl)-pent-4-enyl]-succinimide) has remarkable antiproliferative effects in vitro, attributed to the formation of a stabilized quinone methide. The present article reports in vivo results for a possible preclinical study. SuccFerr is lipophilic and insoluble in water, so the development of a formulation to obviate this inconvenience was necessary. This was achieved by complexation with randomly methylated cyclodextrins (RAMEßCDs). This supramolecular water-soluble system allowed the in vivo experiments below to proceed. Application of SuccFerr on the glioblastoma cancer cell line U87 indicates that it affects the cellular cycle by inducing a blockade at G0/G1 phase, linked to apoptosis, and another one at the S phase, associated with senescence. Using healthy Fischer rats, we show that both intravenous and subcutaneous SuccFerr: RAMEßCD administration at 5 mg/kg lacks toxic effects on several organs. To reach lethality, doses higher than 200 mg/kg need to be administered. These results prompted us to perform an ectopic in vivo study at 1 mg/kg i.v. ferrocidiphenol SuccFerr using F98 cells xenografted in rats. Halting of cancer progression was observed after six days of injection, associated with an immunological defense response linked to the active principle. These results demonstrate that the properties of the selected ferrocidiphenol SuccFerr transfer successfully to in vivo conditions, leading to interesting therapeutic perspectives based on this chemistry.

Application of molecular docking in elaborating molecular mechanisms and interactions of supramolecular cyclodextrin

The cyclodextrin (CD)-based supramolecular nanomedicines have attracted growing interest because of their superior characteristics, including desirable biocompatibility, low toxicity, unique molecular structure and easy functionalization. The smart structures of CD impart host-guest interaction for meeting the multifunctional needs of disease therapy. However, it faces challenges in formulation design and inclusion mechanism clarification of the functional supramolecular assemblies owing to the complicated structures and mechanisms. Fortunately, molecular docking helps the researchers to comprehend the interaction between the drug and the target molecule for achieving high-through screening from the database. In this review, we summarized the category and characteristics of molecular docking along with the properties and applications of CD. Significantly, we highlighted the application of molecular docking in elaborating molecular mechanisms and simulating complex structures at molecular levels. The issues and development of CD and molecular docking were also presented to provide beneficial reference and new insights for supramolecular nano-systems.

Recent Advances in Aggregation-Induced Emission Active Materials for Sensing of Biologically Important Molecules and Drug Delivery System

The emergence and development of aggregation induced emission (AIE) have attracted worldwide attention due to its unique photophysical phenomenon and for removing the obstacle of aggregation-caused quenching (ACQ) which is the most detrimental process thereby making AIE an important and promising aspect in various fields of fluorescent material, sensing, bioimaging, optoelectronics, drug delivery system, and theranostics. In this review, we have discussed insights and explored recent advances that are being made in AIE active materials and their application in sensing, biological cell imaging, and drug delivery systems, and, furthermore, we explored AIE active fluorescent material as a building block in supramolecular chemistry. Herein, we focus on various AIE active molecules such as tetraphenylethylene, AIE-active polymer, quantum dots, AIE active metal-organic framework and triphenylamine, not only in terms of their synthetic routes but also we outline their applications. Finally, we summarize our view of the construction and application of AIE-active molecules, which thus inspiring young researchers to explore new ideas, innovations, and develop the field of supramolecular chemistry in years to come.

Cyclodextrin Complexed Lipid Nanoparticles of Irbesartan for Oral Applications: Design, Development, and In Vitro Characterization

Irbesartan (IR) is an angiotensin II receptor antagonist drug with antihypertensive activity. IR bioavailability is limited due to poor solubility and first-pass metabolism. The current investigation aimed to design, develop, and characterize the cyclodextrin(s) (CD) complexed IR (IR-CD) loaded solid lipid nanoparticles (IR-CD-SLNs) for enhanced solubility, sustained release behavior, and subsequently improved bioavailability through oral administration. Based on phase solubility studies, solid complexes were prepared by the coacervation followed by lyophilization method and characterized for drug content, inclusion efficiency, solubility, and in vitro dissolution. IR-CD inclusion complexes demonstrated enhancement of solubility and dissolution rate of IR. However, the dissolution efficiency was significantly increased with hydroxypropyl-βCD (HP-βCD) inclusion complex than beta-CD (βCD). SLNs were obtained by hot homogenization coupled with the ultrasonication method with IR/HP-βCD inclusion complex loaded into Dynasan 112 and glycerol monostearate (GMS). SLNs were evaluated for physicochemical characteristics, in vitro release, differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD), and physical stability at room temperature for two months. The optimized SLNs formulation showed particle size, polydispersity index, zeta potential, assay, and entrapment efficiency of 257.6 ± 5.1 nm, 0.21 ± 0.03, -30.5 ± 4.1 mV, 99.8 ± 2.5, and 93.7 ± 2.5%, respectively. IR-CD-SLN and IR-SLN dispersions showed sustained release of IR compared to the IR-CD inclusion complexes. DSC results complimented PXRD results by the absence of IR endothermic peak. Optimized IR-CD complex, IR-SLN, and IR-CD-SLN formulations were stable for two months at room temperature. Thus, the current IR oral formulation may exhibit improved oral bioavailability and prolonged antihypertensive activity, which may improve therapeutic outcomes in the treatment of hypertension and heart failure.

Cyclodextrin-Modified Nanomaterials for Drug Delivery: Classification and Advances in Controlled Release and Bioavailability

In drug delivery, one widely used way of overcoming the biopharmaceutical problems present in several active pharmaceutical ingredients, such as poor aqueous solubility, early instability, and low bioavailability, is the formation of inclusion compounds with cyclodextrins (CD). In recent years, the use of CD derivatives in combination with nanomaterials has shown to be a promising strategy for formulating new, optimized systems. The goals of this review are to give in-depth knowledge and critical appraisal of the main CD-modified or CD-based nanomaterials for drug delivery, such as lipid-based nanocarriers, natural and synthetic polymeric nanocarriers, nanosponges, graphene derivatives, mesoporous silica nanoparticles, plasmonic and magnetic nanoparticles, quantum dots and other miscellaneous systems such as nanovalves, metal-organic frameworks, Janus nanoparticles, and nanofibers. Special attention is given to nanosystems that achieve controlled drug release and increase their bioavailability during in vivo studies.

Encapsulation of volatile compounds in liquid media: Fragrances, flavors, and essential oils in commercial formulations

The first marketed example of the application of microcapsules dates back to 1957. Since then, microencapsulation techniques and knowledge have progressed in a plethora of technological fields, and efforts have been directed toward the design of progressively more efficient carriers. The protection of payloads from the exposure to unfavorable environments indeed grants enhanced efficacy, safety, and stability of encapsulated species while allowing for a fine tuning of their release profile and longer lasting beneficial effects. Perfumes or, more generally, active-loaded microcapsules are nowadays present in a very large number of consumer products. Commercial products currently make use of rigid, stable polymer-based microcapsules with excellent release properties. However, this type of microcapsules does not meet certain sustainability requirements such as biocompatibility and biodegradability: the leaking via wastewater contributes to the alarming phenomenon of microplastic pollution with about 4% of total microplastic in the environment. Therefore, there is a need to address new issues which have been emerging in relation to the poor environmental profile of such materials. The progresses in some of the main application fields of microencapsulation, such as household care, toiletries, cosmetics, food, and pesticides are reviewed herein. The main technologies employed in microcapsules production and the mechanisms underlying the release of actives are also discussed. Both the advantages and disadvantages of every technique have been considered to allow a careful choice of the most suitable technique for a specific target application and prepare the ground for novel ideas and approaches for encapsulation strategies that we expect to be proposed within the next years.

Bridging micro/nano-platform and airway allergy intervention

Allergic airway diseases, with incidence augmenting visibly as industrial development and environmental degradation, are characterized by sneezing, itching, wheezing, chest tightness, airway obstruction, and hyperresponsiveness. Current medical modalities attempt to combat these symptoms mostly by small molecule chemotherapeutants, such as corticosteroids, antihistamines, etc., via intranasal approach which is one of the most noninvasive, rapid-absorbed, and patient-friendly routes. Nevertheless, inherent defects for irritation to respiratory mucosa, drug inactivation and degradation, and rapid drug dispersal to off-target sites are inevitable. Lately, intratracheal micro/nano therapeutic systems are emerging as innovative alternatives for airway allergy interventions. This overview introduces several potential application directions of mic/nano-platform in the treatment of airway allergic diseases, including carriers, therapeutic agents, and immunomodulators. The improvement of the existing drug therapy of respiratory allergy management by micro/nano-platform is described in detail. The challenges of the micro/nano-platform nasal approach in the treatment of airway allergy are summarized and the development of micro/nano-platform is also prospected. Although still a burgeoning area, micro/nano therapeutic systems are gradually turning to be realistic orientations as crucial future alternative therapeutic options in allergic airway inflammation interventions.

Nanotechnology based advanced therapeutic strategies for targeting interleukins in chronic respiratory diseases

Both communicable and non-communicable chronic respiratory conditions have accorded for suffering of millions of people of all ages and stated to be leading cause of death, morbidity, economic and social pressures, and disability-adjusted life-years (DALYs) worldwide. These illnesses impair patient's health and negatively impacts families and society, particularly in low and middle-income countries. Chronic respiratory diseases (CRDs) affect different organs of respiratory system, involving airways, parenchyma, and pulmonary vasculature. As the number of respiratory diseases are exponentially escalating but still the stakeholders are not paying attention towards its serious complications. Currently, the treatment being used primarily focusses only on alleviating symptoms of these illness rather delivering the therapeutic agent at target site for optimal care and/or prevention. Lately, extensive research is being conducted on airways and systemic inflammation, oxidative stress, airway, or parenchymal rehabilitation. From which macrophages, neutrophils, and T cells, as well as structural cells as fibroblasts, epithelial, endothelial, and smooth muscle cells have been found to be active participants that are involved in these chronic respiratory diseases. The pathogenesis of all these chronic respiratory diseases gets caused differently via mediators and proteins, including cytokines, chemokines, growth factors and oxidants. Presently, the target of prescription therapies is to reduce the inflammation of airways and relieve the airway contraction. In all studies, cytokines have been found to play an imperative role in fostering chronic airway inflammation and remodelling. Owing to the limitations of conventional treatments, the current review aims to summarize the current knowledge about the chronic respiratory disease and discuss further about the various conventional methods that can be used for treating this ailment. Additionally, it also highlights and discusses about the advanced drug delivery system that are being used for targeting the interleukins for the treatment of CRDs.

Inclusion of Levodopa into β-Cyclodextrin: A Comprehensive Computational Study

This study focused on the inclusion of levodopa (LVDP) into β-cyclodextrin (BCD) using various computational methods such as quantum mechanics (QM), molecular dynamics/steered molecular dynamics (MD/SMD), and QM/molecular mechanics/Poison-Boltzmann surface area (QM/MM/PBSA). The QM results assigned the most significant charge-transfer atoms and the higher stability of LVDP in the aqueous phase. The MD results indicate the formation of a 1:1 complex with a reasonable estimation of the effective radius of the complex, the significant contribution of hydrogen bonding in the binding energy, and the enhancement of the water solubility of LVDP. By accounting for the water hydrogen bonds and their dipolar effects, QM/MM calculations lead to the more accurate IR spectrum and binding energy of the BCD-LVDP complex. By considering carboxylic and amine functional groups' more precise arrangement, QM/MM assigns stronger hydrogen bonds between LVDP and BCD. While all the methods provide a reasonable estimation of the binding energy, the most accurate value (-4.14 kcal/mol) is obtained from QM/MM/PBSA.

Characteristic of Cyclodextrins: Their Role and Use in the Pharmaceutical Technology

About 40% of newly-discovered entities are poorly soluble in water, and this may be an obstacle in the creation of new drugs. To address this problem, the present review article examines the structure and properties of cyclodextrins and the formation and potential uses of drug - cyclodextrin inclusion complexes. Cyclodextrins are cyclic oligosaccharides containing six or more D-(+)- glucopyranose units linked by α-1,4-glycosidic bonds, which are characterized by a favourable toxicological profile, low local toxicity and low mucous and eye irritability; they are virtually non-toxic when administered orally. They can be incorporated in the formulation of new drugs in their natural form (α-, β-, γ-cyclodextrin) or as chemically-modified derivatives. They may also be used as an excipient in drugs delivered by oral, ocular, dermal, nasal and rectal routes, as described in the present paper. Cyclodextrins are promising compounds with many beneficial properties, and their use may be increasingly profitable for pharmaceutical scientists.