Chitosan-gelatin biopolymers as carrier substrata for limbal epithelial stem cells

Reconstruction of rabbit corneal epithelium using adipose and / or bone marrow stem cells

One of the main causes of corneal blindness is corneal alkali burn, which can also result in serious side effects such as limbal stem cell deficit, corneal perforation, and permanent epithelial abnormalities. This study set out to investigate the therapeutic potential of ADMSCs and BMMSCs for the reconstruction of the corneal surface after chemical alkali burn. Twelve adult rabbits were divided equally into four groups. Each rabbit in the other groups had a chemical alkali burn applied to their right eye using 6 mm-wide NaoH soaked filter paper, while the negative control group had no intervention. All groups except negative control group received topical and subconjunctival injections. Group I (Negative control) received no therapy, whereas Group II received an injection of phosphate-buffered saline as the positive control. Group III received 1 mL of ADMSCs, while Group IV received 1 mL of BMMSCs. After 4 weeks, the corneal tissue underwent morphological, histological, immunohistochemical examination and gene expression. The ocular tissue underwent histopathological examination revealed re-epithelialization and nearly normal architecture in the BMMSC-treated group. The injured cornea treated with ADMSCs showed partial repair of the anterior epithelium, in addition to inflammatory cells infiltration. An immunohistochemical analysis revealed that, compared to ADMSCs and positive control groups, the majority of the stromal cells in the cornea treated by BMMSCs exhibited robust positive expression of vimentin and Ki67. BMMSCs exhibited considerably higher levels of gene expression for corneal indicators, such as keratin 12 and connexin 43, in comparison to other groups. In treating a corneal chemical burn, this study shows that MSCs produced from bone marrow and adipose tissue effectively reduce tissue inflammation, enhance corneal tissue repair, and stimulate cell renewal, with BMMSCs showing better outcomes.

Thermosensitive Hydrogel Integrated with Bimetallic Nano-Enzymes for Modulating the Microenvironment in Diabetic Wound Beds

Effective regulation and reconstruction of the microenvironment are critical for the regeneration of chronic wounds. Diabetic wounds, in particular, pose a significant clinical challenge due to increased oxidative stress and dysfunctional healing processes. In this study, a novel therapeutic strategy is developed using 3D copper-magnesium bimetallic antioxidant nano-enzymes (Cu/Mg-MOF) to mitigate reactive oxygen species (ROS) and restore redox balance through electron transfer. To optimize delivery, a thermo-sensitive hydrogel composed of chitosan (CS) and ε-polylysine (PL) is designed, serving as an efficient carrier for the nano-enzymes. This Cu/Mg-MOF@CS/PL hydrogel exhibits excellent physical properties, including injectability, softness, and biocompatibility, making it ideal for application in diabetic wounds. In a diabetic wound model, treatment with Cu/Mg-MOF@CS/PL hydrogel significantly accelerated wound healing, with a closure rate of 90.6% by day 14, compared to just 55.4% in the untreated group. The hydrogel effectively promoted key aspects of wound healing, such as collagen deposition, re-epithelialization, angiogenesis, and immunomodulation. These findings underscore the potential of the Cu/Mg-MOF@CS/PL hydrogel as a promising therapeutic system for enhancing the healing of diabetic wounds.

Biologicals and Biomaterials for Corneal Regeneration and Vision Restoration in Limbal Stem Cell Deficiency

The mammalian cornea is decorated with stem cells bestowed with the life-long task of renewing the epithelium, provided they remain healthy, functional, and in sufficient numbers. If not, a debilitating disease known as limbal stem cell deficiency (LSCD) can develop causing blindness. Decades after the first stem cell (SC) therapy is devised to treat this condition, patients continue to suffer unacceptable failures. During this time, improvements to therapeutics have included identifying better markers to isolate robust SC populations and nurturing them on crudely modified biological or biomaterial scaffolds including human amniotic membrane, fibrin, and contact lenses, prior to their delivery. Researchers are now gathering information about the biomolecular and biomechanical properties of the corneal SC niche to decipher what biological and/or synthetic materials can be incorporated into these carriers. Advances in biomedical engineering including electrospinning and 3D bioprinting with surface functionalization and micropatterning, and self-assembly models, have generated a wealth of biocompatible, biodegradable, integrating scaffolds to choose from, some of which are being tested for their SC delivery capacity in the hope of improving clinical outcomes for patients with LSCD.

Cell therapy in the cornea: The emerging role of microenvironment

The cornea is an ideal testing field for cell therapies. Its highly ordered structure, where specific cell populations are sequestered in different layers, together with its accessibility, has allowed the development of the first stem cell-based therapy approved by the European Medicine Agency. Today, different techniques have been proposed for autologous and allogeneic limbal and non-limbal cell transplantation. Cell replacement has also been attempted in cases of endothelial cell decompensation as it occurs in Fuchs dystrophy: injection of cultivated allogeneic endothelial cells is now in advanced phases of clinical development. Recently, stromal substitutes have been developed with excellent integration capability and transparency. Finally, cell-derived products, such as exosomes obtained from different sources, have been investigated for the treatment of severe corneal diseases with encouraging results. Optimization of the success rate of cell therapies obviously requires high-quality cultured cells/products, but the role of the surrounding microenvironment is equally important to allow engraftment of transplanted cells, to preserve their functions and, ultimately, lead to restoration of tissue integrity and transparency of the cornea.

Advances in Cell Transplantation Therapy for Limbal Stem Cell Deficiency

BACKGROUND

Limbal stem cells (LSCs) are essential for maintaining corneal transparency and ocular surface integrity. Many external factors or genetic diseases can lead to corneal limbal stem cell deficiency (LSCD), resulting in the loss of barrier and corneal epithelial cell renewal functions. Stem cell transplantation is one of the primary treatments for LSCD, including limbal transplantation and cultivated limbal epithelial transplantation. In addition, a variety of non-limbal stem cell lines have been experimented with for LSCD treatment. Biological scaffolds are also used to support in vitro stem cell culture and transplantation. Here, we review the mechanisms of corneal maintenance by LSCs, the clinical stage and surgical treatment of LSCD, the source of stem cells, and the biological scaffolds required for in vitro culture.

METHODS

This study is a narrative retrospective study aimed at collecting available information on various aspects of surgical treatments for LSCD. Relevant literature was searched in a range of online databases, including Web of Science, Scopus, and PubMed from 2005 to March, 2023.

RESULTS

A total of 397 relevant articles were found, and 49 articles with strong relevance to the studies in this paper were obtained and analyzed. Moreover, 11 of these articles were on the concept of LSCD and the mechanism of LESCs maintaining the corneal epithelium, 3 articles on the staging and grading of LSCD, 17 articles on cell transplantation methods and donor cell sources, and 18 articles on scaffolds for delivering stem cells. We also summarized the advantages and disadvantages of different cell transplantation methods and the benefits and limitations of scaffolds based on the above literature.

CONCLUSION

The treatment of LSCD is determined by the clinical stage and whether it involves monocular or binocular eyes. Appropriate surgical techniques should be taken for LSCD patients in order to reconstruct the ocular surface, relieve symptoms, and restore visual function. Meanwhile, biological scaffolds assist in the ex vivo culture and implantation of stem cells.

Development of a membrane and a bilayer of chitosan, gelatin, and polyhydroxybutyrate to be used as wound dressing for the regeneration of rat excisional wounds

The skin is the largest organ in the human body that acts as a protective barrier from the outside environment. Certain dermatological pathologies or significant skin lesions can result in serious complications. Several studies have focused on the development of tissue-engineered skin substitutes. In this study, a new bilayer scaffold composed of a chitosan-gelatin membrane and a chitosan-polyhydroxybutyrate (PHB) porous matrix was synthesized and populated with human adipose-derived mesenchymal stem cells (hASCs) to be potentially used for wound dressing applications. By combining this membrane and porous matrix with the stem cells, we aimed to provide immunomodulation and differentiation capabilities for the wound environment, as well as mechanical strength and biocompatibility for the underlying tissue. The membrane was prepared from the mixture of chitosan and gelatin in a 2:1 ratio and the porous matrix was prepared from the mixture of chitosan and PHB, in equal proportions to form a final solution at 2.5% (m/v). Fourier transform infrared spectroscopy analysis showed the formation of blends, and micro-computed tomography, scanning electron microscopy and atomic force microscopy images demonstrated membrane roughness and matrix porosity. The MTT assay showed that the scaffolds were biocompatible with hASC. The membrane and the bilayer were used as dressing and support for cell migration in the dorsal excisional wound model in Wistar rats. Histological and gene transcriptional analyses showed that the animals that received the scaffolds regenerated the hair follicles in the deep dermis in the central region of the wound. Our results demonstrate the potential of these new biomaterials as dressings in wound healing studies, favoring tissue regeneration.

In Vivo Confocal Microscopy in Limbal Stem Cell Deficiency After Mesenchymal Stem Cell Transplantation: A Sub-analysis from a Phase I-II Clinical Trial

INTRODUCTION

The aim of this work is to evaluate the effect of mesenchymal stem cell transplantation (MSCT) and cultivated limbal epithelial transplantation (CLET) therapies on the limbus of patients suffering from limbal stem cell deficiency (LSCD).

METHODS

A sub-analysis of a phase I-II randomized, controlled, and double-masked clinical trial was performed to assess the changes in the anatomical structures of the limbus. In vivo confocal microscopy (IVCM) analysis was carried out in LSCD eyes before and 12 months after allogeneic MSCT or CLET. Epithelial phenotype of the central cornea, as well as the presence of transition zones and palisades of Vogt in the limbus, were assessed using Wilcoxon test.

RESULTS

Twenty-three LSCD (14 MSCT and nine CLET) eyes were included. The epithelial phenotype of the central cornea improved significantly (p < 0.001) from 15 (eight MSCT, seven CLET) and eight (six MSCT, two CLET) LSCD eyes showing conjunctival and mixed phenotypes, respectively, to eight (five MSCT, three CLET), five (two MSCT, three CLET), and ten (seven MSCT, three CLET) eyes showing conjunctival, mixed, and corneal phenotypes, respectively. Transition areas and palisades of Vogt were observed in at least one quadrant in nine (five MSCT, four CLET) and 16 (nine MSCT, seven CLET), and in four (two MSCT, two CLET) and six (three MSCT, three CLET) LSCD eyes before and after surgery, respectively. Changes in the transition zones and palisades were solely significant (p = 0.046) for the nasal and inferior quadrants, respectively.

CONCLUSIONS

MSCT and CLET improved the central corneal epithelial phenotype despite only minor changes in the anatomical structures of the limbus, as detected by IVCM technology.

TRIAL REGISTRATION

ClinicalTrials.gov identifier, NCT01562002.

Corneal regeneration strategies: From stem cell therapy to tissue engineered stem cell scaffolds

Corneal epithelial defects and excessive wound healing might lead to severe complications. As stem cells can self-renew infinitely, they are a promising solution for regenerating the corneal epithelium and treating severe corneal epithelial injury. The chemical and biophysical properties of biological scaffolds, such as the amniotic membrane, fibrin, and hydrogels, can provide the necessary signals for stem cell proliferation and differentiation. Multiple researchers have conducted investigations on these scaffolds and evaluated them as potential therapeutic interventions for corneal disorders. These studies have identified various inherent benefits and drawbacks associated with these scaffolds. In this study, we provided a comprehensive overview of the history and use of various stem cells in corneal repair. We mainly discussed biological scaffolds that are used in stem cell transplantation and innovative materials that are under investigation.

Recent Approaches to the Modification of Collagen Biomatrix as a Corneal Biomatrix and Its Cellular Interaction

Over the last several decades, numerous modifications and advancements have been made to design the optimal corneal biomatrix for corneal epithelial cell (CECs) or limbal epithelial stem cell (LESC) carriers. However, researchers have yet to discover the ideal optimization strategies for corneal biomatrix design and its effects on cultured CECs or LESCs. This review discusses and summarizes recent optimization strategies for developing an ideal collagen biomatrix and its interactions with CECs and LESCs. Using PRISMA guidelines, articles published from June 2012 to June 2022 were systematically searched using Web of Science (WoS), Scopus, PubMed, Wiley, and EBSCOhost databases. The literature search identified 444 potential relevant published articles, with 29 relevant articles selected based on inclusion and exclusion criteria following screening and appraising processes. Physicochemical and biocompatibility (in vitro and in vivo) characterization methods are highlighted, which are inconsistent throughout various studies. Despite the variability in the methodology approach, it is postulated that the modification of the collagen biomatrix improves its mechanical and biocompatibility properties toward CECs and LESCs. All findings are discussed in this review, which provides a general view of recent trends in this field.

Caffeine Release from Magneto-Responsive Hydrogels Controlled by External Magnetic Field and Calcium Ions and Its Effect on the Viability of Neuronal Cells

Caffeine (CAF) is a psychostimulant present in many beverages and with rapid bioabsorption. For this reason, matrices that effectuate the sustained release of a low amount of CAF would help reduce the intake frequency and side effects caused by high doses of this stimulant. Thus, in this study, CAF was loaded into magnetic gelatin/alginate (Gel/Alg/MNP) hydrogels at 18.5 mg/ghydrogel. The in vitro release of CAF was evaluated in the absence and presence of an external magnetic field (EMF) and Ca2+. In all cases, the presence of Ca2+ (0.002 M) retarded the release of CAF due to favorable interactions between them. Remarkably, the release of CAF from Gel/Alg/MNP in PBS/CaCl2 (0.002 M) at 37 °C under an EMF was more sustained due to synergic effects. In PBS/CaCl2 (0.002 M) and at 37 °C, the amounts of CAF released after 45 min from Gel/Alg and Gel/Alg/MNP/EMF were 8.3 ± 0.2 mg/ghydrogel and 6.1 ± 0.8 mg/ghydrogel, respectively. The concentration of CAF released from Gel/Alg and Gel/Alg/MNP hydrogels amounted to ~0.35 mM, thereby promoting an increase in cell viability for 48 h. Gel/Alg and Gel/Alg/MNP hydrogels can be applied as reservoirs to release CAF at suitable concentrations, thus forestalling possible side effects and improving the viability of SH-SY5Y cells.

The progress in techniques for culturing human limbal epithelial stem cells

In vitro culture of human limbal epithelial stem cells (hLESCs) is crucial to cell therapy in the treatment of limbal stem cell deficiency, a potentially vision-threatening disease that is characterized by persistent corneal epithelial defects and corneal epithelium conjunctivalization. Traditionally, hLESCs are cultivated based on either limbal tissue explants or single-cell suspensions in culture media containing xenogenous components, such as fetal bovine serum and murine 3T3 feeder cells. Plastic culture dishes and human amniotic membranes are classical growth substrates used in conventional hLESC culture systems. The past few decades have witnessed considerable progress and innovations in hLESC culture techniques to ensure a higher level of biosafety and lower immunogenicity for further cell treatment, including complete removal of xenogenous components from culture media, the application of human-derived feeder cells, and the development of novel scaffolds. Three-dimensional artificial niches and three-dimensional culture techniques have also been established to simulate the real microenvironment of limbal crypts for better cell outgrowth and proliferation. All these progresses ensure that in vitro cultured hLESCs are more adaptable to translational stem cell therapy for limbal stem cell deficiency.

Hyaluronic Acid-Functionalized Hybrid Gelatin-Poly-L-Lactide Scaffolds with Tunable Hydrophilicity

In this study, we describe the production of hybrid gelatin-poly-L-lactide electrospun scaffolds whose hydrophilicity was controlled by binding increasing concentrations of hyaluronic acid (HA). We show that cross-linking has advantages over coating when aiming to functionalize the scaffolds with HA. The here described scaffolds structurely mimicked the complexity of the extracellular matrix, and when excited by second harmonic generation, they produced a signal that is typical of collagen-containing biological fibers. Fluorescence lifetime imaging microscopy (FLIM) was used to marker-independently monitor the growth of human dermal fibroblasts on the electrospun scaffolds using reduced (phosphorylated) nicotinamide adenine dinucleotide as target. Benefitting from the different fluorescence lifetimes of the polymer and the endogenous cellular fluorophore, we were able to distinguish and separate the signals produced by the cells from the signals generated by the electrospun scaffolds. FLIM further allowed the detection of metabolic differences in the cells seeded on the HA-functionalized scaffolds compared with cells that were cultured on nonfunctionalized control scaffolds.

Goals and Challenges of Stem Cell-Based Therapy for Corneal Blindness Due to Limbal Deficiency

Corneal failure is a highly prevalent cause of blindness. One special cause of corneal failure occurs due to malfunction or destruction of the limbal stem cell niche, upon which the superficial cornea depends for homeostatic maintenance and wound healing. Failure of the limbal niche is referred to as limbal stem cell deficiency. As the corneal epithelial stem cell niche is easily accessible, limbal stem cell-based therapy and regenerative medicine applied to the ocular surface are among the most highly advanced forms of this novel approach to disease therapy. However, the challenges are still great, including the development of cell-based products and understanding how they work in the patient's eye. Advances are being made at the molecular, cellular, and tissue levels to alter disease processes and to reduce or eliminate blindness. Efforts must be coordinated from the most basic research to the most clinically oriented projects so that cell-based therapies can become an integrated part of the therapeutic armamentarium to fight corneal blindness. We undoubtedly are progressing along the right path because cell-based therapy for eye diseases is one of the most successful examples of global regenerative medicine.

Emerging Biofabrication Techniques: A Review on Natural Polymers for Biomedical Applications

Natural polymers have been widely used for biomedical applications in recent decades. They offer the advantages of resembling the extracellular matrix of native tissues and retaining biochemical cues and properties necessary to enhance their biocompatibility, so they usually improve the cellular attachment and behavior and avoid immunological reactions. Moreover, they offer a rapid degradability through natural enzymatic or chemical processes. However, natural polymers present poor mechanical strength, which frequently makes the manipulation processes difficult. Recent advances in biofabrication, 3D printing, microfluidics, and cell-electrospinning allow the manufacturing of complex natural polymer matrixes with biophysical and structural properties similar to those of the extracellular matrix. In addition, these techniques offer the possibility of incorporating different cell lines into the fabrication process, a revolutionary strategy broadly explored in recent years to produce cell-laden scaffolds that can better mimic the properties of functional tissues. In this review, the use of 3D printing, microfluidics, and electrospinning approaches has been extensively investigated for the biofabrication of naturally derived polymer scaffolds with encapsulated cells intended for biomedical applications (e.g., cell therapies, bone and dental grafts, cardiovascular or musculoskeletal tissue regeneration, and wound healing).

Prospects and Challenges of Translational Corneal Bioprinting

Corneal transplantation remains the ultimate treatment option for advanced stromal and endothelial disorders. Corneal tissue engineering has gained increasing interest in recent years, as it can bypass many complications of conventional corneal transplantation. The human cornea is an ideal organ for tissue engineering, as it is avascular and immune-privileged. Mimicking the complex mechanical properties, the surface curvature, and stromal cytoarchitecure of the in vivo corneal tissue remains a great challenge for tissue engineering approaches. For this reason, automated biofabrication strategies, such as bioprinting, may offer additional spatial control during the manufacturing process to generate full-thickness cell-laden 3D corneal constructs. In this review, we discuss recent advances in bioprinting and biomaterials used for in vitro and ex vivo corneal tissue engineering, corneal cell-biomaterial interactions after bioprinting, and future directions of corneal bioprinting aiming at engineering a full-thickness human cornea in the lab.

Propagation of limbal stem cells on polycaprolactone and polycaprolactone/gelatin fibrous scaffolds and transplantation in animal model

Introduction: This study was conducted to compare the effect of nanofibrous polycaprolactone (PCL) and PCL/gelatin (PCL/Gel) on limbal epithelial stem cell (LESC) and its efficiency for transplantation in animal model. Methods: PCL and PCL/Gel with a mass ratio of 70:30 and 50:50 was fabricated by electrospinning method. Human LESCs were cultured on PCL and PCL/Gel scaffolds and the effect of each scaffold on LESC proliferation, attachment and corneal epithelial regeneration in an animal model was evaluated, considering ease of use of scaffold and final transparency of the cornea. Results: Our data showed that PCL was more suitable than PCL/Gel for LESCs adherence, induction of epithelial morphology and proliferation. Histopathologic analysis of corneal sections from transplanted animals showed that epithelium was regenerated almost similar in PCL and PCL/Gel groups; however, vascularization and inflammation were significantly lower in the group receiving PCL. Conclusion: The represented data indicated the priority of PCL to PCL/Gel for the LESC attachment, proliferation and final outcome in an animal model of alkaline injury. This finding might be promising for cell therapy of corneal diseases.

Poly-l/dl-lactic acid films functionalized with collagen IV as carrier substrata for corneal epithelial stem cells

Limbal epithelial stem cells (LESCs) are responsible for the renewal of corneal epithelium. Cultivated limbal epithelial transplantation is the current treatment of choice for restoring the loss or dysfunction of LESCs. To perform this procedure, a substratum is necessary for in vitro culturing of limbal epithelial cells and their subsequent transplantation onto the ocular surface. In this work, we evaluated poly-L/DL-lactic acid 70:30 (PLA) films functionalized with type IV collagen (col IV) as potential in vitro carrier substrata for LESCs. We first demonstrated that PLA-col IV films were biocompatible and suitable for the proliferation of human corneal epithelial cells. Subsequently, limbal epithelial cell suspensions, isolated from human limbal rings, were cultivated using culture medium that did not contain animal components. The cells adhered significantly faster to PLA-col IV films than to tissue culture plastic (TCP). The mRNA expression levels for the LESC specific markers, K15, P63α and ABCG2 were similar or greater (significantly in the case of K15) in limbal epithelial cells cultured on PLA-col IV films than limbal epithelial cells cultured on TCP. The percentage of cells expressing the corneal (K3, K12) and the LESC (P63α, ABCG2) specific markers was similar for both substrata. These results suggest that the PLA-col IV films promoted LESC attachment and helped to maintain their undifferentiated stem cell phenotype. Consequently, these substrata offer an alternative for the transplantation of limbal cells onto the ocular surface.

Universal Corneal Epithelial-Like Cells Derived from Human Embryonic Stem Cells for Cellularization of a Corneal Scaffold

Purpose

We generated universal corneal epithelial cells (CEC) from human embryonic stem cells (hESC) by genetically removing human leukocyte antigens (HLA) class I from the cell surface.

Methods

The serum-free, growth factor-free, and defined medium E6 was used to differentiate hESC to CEC. Decellularized murine corneas were recellularized with hESC-derived CEC. Using CRISPR/Cas9, β-2-microglobulin (B2M) was deleted in hESC to block the assembly of HLA class-I antigens on the cell surface to generate B2M^−/− CEC.

Results

E6 alone was sufficient to allow hESC differentiation to CEC. A time-course analysis of the global gene expression of the differentiating cells indicates that the differentiation closely resembles the corneal development in vivo. The hESC-CEC were highly proliferative, and could form multilayer epithelium in decellularized murine cornea, retain its transparency, and form intact tight junctions on its surface. As reported before, B2M knockout led to the absence of HLA class-I on the cell surface of hESC and subsequently derived CEC following stimulation with inflammatory factors. Moreover, B2M^−/− CEC, following transplantation into mouse eyes, caused less T-cell infiltration in the limbal region of the eye than the wild-type control.

Conclusions

CEC can be derived from hESC via a novel and simple protocol free of any proteins, hESC-CEC seeded on decellularized animal cornea form tight junctions and allow light transmittance, and B2M^−/− CEC are hypoimmunogenic both in vitro and in vivo.

Translational Relevance

B2M^−/− hESC-CEC can be an unlimited and universal therapy for corneal repair in patients of any HLA type.

Current approaches to the problem of carrier selection for limbal stem cells cultivation in the treatment of limbal stem cell deficiency

Diseases and damages of the ocular surface are one of the common causes of decreased vision and blindness. Dysfunction or death of limbal epithelial stem cells (LESC) plays an important role in the development of pathological processes in these conditions, which leads to the development of the limbal stem cell deficiency (LSCD). Currently, one of the methods to treat LSCD is a transplantation of cultured ex vivo LESC. The most common carriers for the cultivation of LESC in the world is the amniotic membrane (AM). However, the presence of certain disadvantages in using AM for the cultivation of LESC compels to search new types of carriers made from biological or synthetic materials. In this review, we have analyzed various types of carriers: collagen, fibrin, chitosan with gelatin, silk fibroin, keratin, contact lenses, polylactide-co-glycolide, polycaprolactone, and the possibility of their application as carriers for the LESC cultivation followed by transplantation on the ocular surface is considered.

3D-Printed membrane as an alternative to amniotic membrane for ocular surface/conjunctival defect reconstruction: An in vitro & in vivo study

BACKGROUND

The aim of this study was to evaluate the surgical handling and clinical applicability of a specific 3D-printed membrane design fabricated using a gelatin, elastin and sodium hyaluronate blend for conjunctival reconstruction and compare it with amniotic membrane (AM), which is normally used in such surgeries.

METHODS

3D printing technique was employed to fabricate the membrane based on gradient design. Prior to printing, rheometry was employed to optimize the ink composition. The printed membranes were then fully characterized in terms of physical and mechanical properties. In vitro viability, proliferation and adhesion of human limbal epithelial cells were assessed using MTT assay and scanning electron microscopy (SEM), respectively. Prior to in vivo experiment, surgical handling of each membrane was evaluated by three surgeons. In vivo evaluation was conducted through implanting the gelatin-based membranes and AM on induced conjunctival defects in rabbits (n = 8). Clinical observations, including epithelialization, inflammation severity, scar tissue formation and presence of granulation tissue, were recorded from day 1 through day 28. Histological examination was performed on all enucleated eyes on day 28. In addition to H&E staining, specific stains including Periodic Acid Schiff staining, Masson's Trichrome staining and immuno-histochemical staining for α-SMA were further used to assess goblet cell proliferation, healed sub-epithelial stroma and scar tissue formation and the presence of myofibroblasts, respectively.

RESULTS

Among all the examined compositions, a blend of 8% w/v gelatin, 2% w/v elastin and 0.5% w/v sodium hyaluronate was found to be appropriate for printing. The printed membranes had favorable optical characteristics (colorless and transparent), and the surgical handling was significantly easier compared to AM. Epithelial cells cultivated on the membranes indicated suitable viability and proliferation, and SEM images presented appropriate cell adhesion on the surface of the membranes. Clinical observations suggested similar epithelialization time (approximately 3 weeks) for both the membrane and AM grafted eyes but significantly lower levels of clinical inflammation in the membrane group from day 1 through day 28 (p = 0.01), which is a key advantage of using the printed membranes over the AM. Histological examination showed similar qualities in the healed epithelium in terms of cell morphology and cell layers. However, twice the density of goblet cells per 100 cells was observed in the gelatin-based membrane grafted group. Remnant of the degraded implant was seen in only 3 of the membranes, but in 7 of the AM grafted eyes. Inflammation and granulomatous reaction was significantly higher in sections containing the AM compared to membrane (p < 0.01 and p = 0.01, respectively). α-SMA staining was more evident, but not significantly different from the gelatin-based membrane, for the AM group (p = 0.25).

CONCLUSION

The designed gelatin-based membrane offers the necessary physical and mechanical characteristics needed for successful ocular surface/conjunctival defect construction and may be considered a promising alternative to AM due to a more predictable degradation pattern, higher goblet cell density on the healed epithelium, less inflammation and reduced scar tissue formation.

Native and synthetic scaffolds for limbal epithelial stem cell transplantation

Limbal stem cell deficiency (LSCD) is a complex blinding disease of the cornea, which cannot be treated with conventional corneal transplants. Instead, a stem cell (SC) graft is required to replenish the limbal epithelial stem cell (LESC) reservoir, which is ultimately responsible for regenerating the corneal epithelium. Current therapies utilize limbal tissue biopsies that harbor LESCs as well as tissue culture expanded cells. Typically, this tissue is placed on a scaffold that supports the formation of corneal epithelial cell sheets, which are then transferred to diseased eyes. A wide range of biological and synthetic materials have been identified as carrier substrates for LESC, some of which have been used in the clinic, including amniotic membrane, fibrin, and silicon hydrogel contact lenses, each with their own advantages and limitations. This review will provide a brief background of LSCD, focusing on bio-scaffolds that have been utilized in limbal stem cell transplantation (LSCT) and materials that are being developed as potentially novel therapeutics for patients with this disease.

STATEMENT OF SIGNIFICANCE

The outcome of patients with corneal blindness that receive stem cell grafts to restore eye health and correct vision varies considerably and may be due to the different biological and synthetic scaffolds used to deliver these cells to the ocular surface. This review will highlight the positive attributes and limitations of the myriad of carriers developed for clinical use as well as those that are being trialled in pre-clinical models. The overall focus is on developing a standardized therapy for patients, however due to the multiple causes of corneal blindness, a personal regenerative medicine approach may be the best option.

Limbal and Conjunctival Epithelial Cell Cultivation on Contact Lenses-Different Affixing Techniques and the Effect of Feeder Cells

OBJECTIVES

Corneal blindness due to limbal stem-cell deficiency can be treated by transplantation of cultivated limbal epithelial stem cells (LESCs). We examined LESC cultivation on a contact lens (CL) carrier. Our goal was to optimize explant affixation and assess the possible benefit of 3T3 feeder cells.

METHODS

Human cadaver limbal and conjunctival explants were allowed to attach to CLs under the airflow of the laminar box (dried group) or affixed on CLs using suturing (sutured group) or tissue adhesives (glued group), then cultivated with or without 3T3 feeder cells. Outgrowth efficiency was statistically analyzed. CEBPδ, p63, CK3/12, and CK13 were detected by immunofluorescence in expanded cells.

RESULTS

Suturing and gluing provided excellent sample attachment, whereas drying was less effective. Cell expansion was better in sutured than in dried or glued samples. Presence of 3T3 feeder resulted in significantly better cell growth (P=0.048), most importantly in dried samples (P=0.008). Stepwise regression analysis indicated that cell expansion was dependent on the affixing method (P<0.001) and the presence of feeder layer (P=0.003). Expanded cells maintained their CK expression profiles and expressed putative stem-cell markers p63 and CEBPδ. The 3T3 feeder did not influence the expression of putative LESC markers or growth rate.

CONCLUSIONS

Suturing is an effective way to fasten explants to CLs. 3T3 fibroblasts are not necessary in this system, although they may enhance cell outgrowth when samples are exposed to stress. However, once cells begin to expand, neither expression of putative stem-cell markers nor growth rate is influenced by feeder cells.

Thermosensitive chitosan-based hydrogels releasing stromal cell derived factor-1 alpha recruit MSC for corneal epithelium regeneration

Corneal epithelium integrity depends on continuous self-renewing of epithelium and connections between adjacent cells or between the cells and the basement membrane. Self-renewing epithelium cells mainly arise from the continuous proliferation and differentiation of the basal layer and limbal stem cells. The aim of the present study was to generate a bioactive, thermosensitive chitosan-gelatin hydrogel (CHI hydrogel) by incorporating exogenous recombinant human stromal cell-derived factor-1 alpha (SDF-1 alpha) for corneal epithelium regeneration. The exogenous SDF-1 alpha could enhance the stem cells proliferation, chemotaxis and migration, and the expression levels of related genes were significantly elevated in LESCs and mesenchymal stem cells (MSCs) in vitro. Moreover, the MSCs promoted the proliferation and maintained the corneal fate of the LESCs. The rat alkali injury model was used for in vivo study. The injured eyes were covered with CHI hydrogel alone or rhSDF-1 alpha-loaded CHI hydrogel. All rats were followed for 13days. Histological examination showed that the SDF-1 alpha/CHI hydrogel complex group had a nearly normal thickness; moreover, it was also found that this group could upregulate the expression of some genes and had more ΔNp63-positive cells. The SDF-1 alpha/CHI hydrogel complex group had a more tightly arranged epithelium compared with the control group using transmission electron microscopy (TEM). The mechanism for this may have involved the activation of stem cell homing and the secretion of growth factors via the SDF-1/CXCR4 chemokine axis. Therefore, SDF-1 alpha/CHI hydrogel complexes could provide a new idea for the clinical application.

STATEMENT OF SIGNIFICANCE

The clarity of cornea is important for normal vision. The loss or dysfunction of LESCs leads to the impairment of corneal epithelium. The complete regeneration of corneal epithelium has not been achieved. Our study demonstrated that the incorporation of rhSDF-1 alpha with CHI hydrogel accelerated corneal epithelium reconstruction with more native structural and functional properties. The mechanism may involve in inducing proliferation and migration of the LESCs and MSCs to the injury site via the SDF-1/CXCR4 chemokine axis. Therefore, SDF-1 alpha/CHI hydrogel complexes could be a practical application for clinical therapy.

Biomimetic composite scaffolds containing bioceramics and collagen/gelatin for bone tissue engineering - A mini review

Bone is a natural composite material consisting of an organic phase (collagen) and a mineral phase (calcium phosphate, especially hydroxyapatite). The strength of bone is attributed to the apatite, while the collagen fibrils are responsible for the toughness and visco-elasticity. The challenge in bone tissue engineering is to develop such biomimetic composite scaffolds, having a balance between biological and biomechanical properties. This review summarizes the current state of the field by outlining composite scaffolds made of gelatin/collagen in combination with bioactive ceramics for bone tissue engineering application.

An Ultra-thin Amniotic Membrane as Carrier in Corneal Epithelium Tissue-Engineering

Amniotic membranes (AMs) are widely used as a corneal epithelial tissue carrier in reconstruction surgery. However, the engineered tissue transparency is low due to the translucent thick underlying AM stroma. To overcome this drawback, we developed an ultra-thin AM (UAM) by using collagenase IV to strip away from the epithelial denuded AM (DAM) some of the stroma. By thinning the stroma to about 30 μm, its moist and dry forms were rendered acellular, optically clear and its collagen framework became compacted and inerratic. Engineered rabbit corneal epithelial cell (RCEC) sheets generated through expansion of limbal epithelial cells on UAM were more transparent and thicker than those expanded on DAM. Moreover, ΔNp63 and ABCG2 gene expression was greater in tissue engineered cell sheets expanded on UAM than on DAM. Furthermore, 2 weeks after surgery, the cornea grafted with UAM based cell sheets showed higher transparency and more stratified epithelium than the cornea grafted with DAM based cell sheets. Taken together, tissue engineered corneal epithelium generated on UAM has a preferable outcome because the transplanted tissue is more transparent and better resembles the phenotype of the native tissue than that obtained by using DAM for this procedure. UAM preserves compact layer of the amniotic membrane and maybe an ideal substrate for corneal epithelial tissue engineering.

Limbal Stem Cell Deficiency: Current Treatment Options and Emerging Therapies

Severe ocular surface disease can result in limbal stem cell deficiency (LSCD), a condition leading to decreased visual acuity, photophobia, and ocular pain. To restore the ocular surface in advanced stem cell deficient corneas, an autologous or allogenic limbal stem cell transplantation is performed. In recent years, the risk of secondary LSCD due to removal of large limbal grafts has been significantly reduced by the optimization of cultivated limbal epithelial transplantation (CLET). Despite the great successes of CLET, there still is room for improvement as overall success rate is 70% and visual acuity often remains suboptimal after successful transplantation. Simple limbal epithelial transplantation reports higher success rates but has not been performed in as many patients yet. This review focuses on limbal epithelial stem cells and the pathophysiology of LSCD. State-of-the-art therapeutic management of LSCD is described, and new and evolving techniques in ocular surface regeneration are being discussed, in particular, advantages and disadvantages of alternative cell scaffolds and cell sources for cell based ocular surface reconstruction.

Macroporous thin membranes for cell transplant in regenerative medicine

The aim of this paper is to present a method to produce macroporous thin membranes made of poly (ethyl acrylate-co-hydroxyethyl acrylate) copolymer network with varying cross-linking density for cell transplantation and prosthesis fabrication. The manufacture process is based on template techniques and anisotropic pore collapse. Pore collapse was produced by swelling the membrane in acetone and subsequently drying and changing the solvent by water to produce 100 microns thick porous membranes. These very thin membranes are porous enough to hold cells to be transplanted to the organism or to be colonized by ingrowth from neighboring tissues in the organism, and they present sufficient tearing stress to be sutured with surgical thread. The obtained pore morphology was observed by Scanning Electron Microscope, and confocal laser microscopy. Mechanical properties were characterized by stress-strain experiments in tension and tearing strength measurements. Morphology and mechanical properties were related to the different initial thickness of the scaffold and the cross-linking density of the polymer network. Seeding efficiency and proliferation of mesenchymal stem cells inside the pore structure were determined at 2 h, 1, 7, 14 and 21 days from seeding.

Gelatin-Based Materials in Ocular Tissue Engineering

Gelatin has been used for many years in pharmaceutical formulation, cell culture and tissue engineering on account of its excellent biocompatibility, ease of processing and availability at low cost. Over the last decade gelatin has been extensively evaluated for numerous ocular applications serving as cell-sheet carriers, bio-adhesives and bio-artificial grafts. These different applications naturally have diverse physical, chemical and biological requirements and this has prompted research into the modification of gelatin and its derivatives. The crosslinking of gelatin alone or in combination with natural or synthetic biopolymers has produced a variety of scaffolds that could be suitable for ocular applications. This review focuses on methods to crosslink gelatin-based materials and how the resulting materials have been applied in ocular tissue engineering. Critical discussion of recent innovations in tissue engineering and regenerative medicine will highlight future opportunities for gelatin-based materials in ophthalmology.