Performance comparison of different types of constructed wetlands for the removal of pharmaceuticals and their transformation products: a review

Enhanced Removal of Common Wastewater-Derived Trace Organic Contaminants in Vertical-Flow Constructed Wetlands Amended with Fe(III)-EDTA

Constructed wetlands (CWs) have gained scholarly attention in the last two decades as promising technologies for the attenuation of trace organic contaminants (TrOCs) from municipal wastewater effluent and combined sewer overflow discharge. Using lab-scale vertical flow constructed wetlands, we investigated amending these systems with Fe-EDTA to improve CW degradation of five representative trace organic contaminants. The study combined a 7-month monitoring campaign, 3 different hydraulic regimes, and soil extraction data to elucidate the effects of the amendment on the fate of the TrOCs within the systems. Our results indicate that Fe-EDTA contributed to the degradation of carbamazepine and sulfamethoxazole under the studied flow regimes. Iron-amended soil columns (n = 5/9 columns fed for 7 months with synthetic domestic wastewater) removed 12 ± 19% of influent carbamazepine (the most recalcitrant TrOC included in the study), 18% higher than the control columns. Operating the columns with periods of retention and discharge further improved carbamazepine and sulfamethoxazole removal efficiency (removal increased to 49 ± 7.6% and 81 ± 9.2% of influent concentrations, respectively). The more readily degradable compounds atenolol and trimethoprim were removed with >97% efficiency in both control and amended columns, regardless of flow. This column study positively correlates Fe-EDTA with improved removal efficiencies of environmentally recalcitrant TrOCs without affecting readily degradable TrOCs.

Constructed wetland microbial fuel cell as enhancing pollutants treatment technology to produce green energy

The persistent challenge of water pollution, exacerbated by slow progress in ecofriendly technologies and accumulating pollutants, underscores the need for innovative solutions. Constructed Wetland Microbial Fuel Cell (CW-MFC) emerges as an intriguing environmental technology capable of adressing this issue by eliminating contaminants from wastewater while simultaneously producing green energy as an additional bonus. In recent years, CW-MFC technology has gained attention due to its sustainability and promising prospects for a circular waste-free industry. However, due to various technological and biological challenges, it has not yet achieved wide-scale application. This review examines the current state of CW-MFC technology and identifies both biotic and abiotic strategies for optimization through operational and structural improvements affecting biocomponents. Our review highlights several key findings: (1) Plants play an important role in reducing the system's inner resistance through mechanisms such as radial oxygen loss, evapotranspiration, and high photosynthetic flow, which facilitate electroactive bacteria and affect redox potential. (2) Plant characteristics such as root porosity, phloem and aerenchyma development, chlorophyll content, and plant biomass are key indicators of CW-MFC performance and significantly impact both pollutant removal and energy harvesting. (3) We expand the criteria for selecting suitable plants to include mesophytes and C3 pollutant-tolerant species, in addition to traditional aquatic and C4 plants. Additionally, the review presents several technical approaches that enhance CW-MFC efficiency: (1) design optimization, (2) use of novel materials, and (3) application of external electrical fields, aeration, light, and temperature adjustments. CW-MFCs are capable of nearly complete elimination of a wide range of contaminants, including organic matter (84 % ± 10), total nitrogen (80 % ± 7) and phosphorus (79 % ± 18) compounds, metals (86 % ± 10), pharmaceuticals (87 % ± 7), dyes (90 % ± 8), and other complex pollutants, while generating green energy. We hope our findings will be useful in optimizing CW-MFC design and providing insights for researchers aiming to advance the technology and facilitate its future scaling.

Insights into the efficiencies of different biological treatment systems for pharmaceuticals removal: A review

This review presents a comprehensive analysis of current research on biological treatment processes for removing pharmaceutical compounds (PhCs) from wastewater. Unlike previous studies on this topic, our study specifically delves into the effectiveness and drawbacks of various treatment approaches such as traditional wastewater treatment facilities (WWTP), membrane bioreactors (MBRs), constructed wetlands (CW), and moving bed biofilm reactors (MBBR). Through the examination and synthesis of information gathered from more than 200 research studies, we have created a comprehensive database that delves into the effectiveness of eliminating 19 particular PhCs, including commonly studied compounds such as acetaminophen, ibuprofen, diclofenac, naproxen, ketoprofen, indomethacin, salicylic acid, codeine, and fenoprofen, amoxicillin, azithromycin, ciprofloxacin, ofloxacin, tetracycline, atenolol, propranolol, and metoprolol. This resource provides a depth and scope of information that was previously lacking in this area of study. Notably, among these pharmaceuticals, azithromycin demonstrated the highest removal rates across all examined treatment systems, with the exception of WWTPs, while carbamazepine consistently exhibited the lowest removal efficiencies across various systems. The analysis showcases the diverse results in removal efficiency impacted by factors such as system configuration, operation specifics, and environmental circumstances. The findings emphasize the critical need for continued innovation and research, specifically recommending the integration of advanced oxidation processes (AOPs) with existing biological treatment methods to improve the breakdown of recalcitrant compounds like carbamazepine. PRACTITIONER POINTS: Persistent pharmaceuticals harm aquatic ecosystems and human health. Biological systems show varying pharmaceutical removal efficiencies. Enhancing HRT and SRT improves removal but adds complexity and costs. Tailored treatment approaches needed based on contaminants and conditions.

Wastewater reuse and pharmaceutical pollution in agriculture: Uptake, transport, accumulation and metabolism of pharmaceutical pollutants within plants

The presence of pharmaceutical pollutants in water sources has become a growing concern due to its potential impacts on human health and other organisms. The physicochemical properties of pharmaceuticals based on their intended therapeutical application, which include antibiotics, hormones, analgesics, and antidepressants, is quite diverse. Their presence in wastewater, sewerage water, surface water, ground water and even in drinking water is reported by many researchers throughout the world. Human exposure to these pollutants through drinking water or consumption of aquatic and terrestrial organisms has raised concerns about potential adverse effects, such as endocrine disruption, antibiotic resistance, and developmental abnormalities. Once in the environment, they can persist, undergo transformation, or degrade, leading to a complex mixture of contaminants. Application of treated wastewater, compost, manures or biosolids in agricultural fields introduce pharmaceutical pollutants in the environment. As pharmaceuticals are diverse in nature, significant differences are observed during their uptake and accumulation in plants. While there have been extensive studies on aquatic ecosystems, the effect on agricultural land is more disparate. As of now, there are few reports available on the potential of plant uptake and transportation of pharmaceuticals within and between plant organs. This review summarizes the occurrence of pharmaceuticals in aquatic water bodies at a range of concentrations and their uptake, accumulation, and transport within plant tissues. Research gaps on pharmaceutical pollutants' specific effect on plant growth and future research scopes are highlighted. The factors affecting uptake of pharmaceuticals including hydrophobicity, ionization, physicochemical properties (pKa, logKow, pH, Henry's law constant) are discussed. Finally, metabolism of pharmaceuticals within plant cells through metabolism phase enzymes and plant responses to pharmaceuticals are reviewed.

Resource recovery and contaminants of emerging concern mitigation by microalgae treating wastewater

This study aimed to investigate the recovery of agricultural biostimulants and biogas from microalgae treating wastewater, in the framework of a circular bioeconomy. To this end, municipal wastewater was treated in demonstrative raceway ponds, and microalgal biomass (Scenedesmus sp.) was then harvested and downstream processed to recover biostimulants and biogas in a biorefinery approach. The effect of microalgal biostimulants on plants was evaluated by means of bioassays, while the biogas produced was quantified in biochemical methane potential (BMP) tests. Furthermore, the fate of contaminants of emerging concern (CECs) over the process was also assessed. Bioassays confirmed the biostimulant effect of microalgae, which showed gibberellin-, auxin- and cytokinin-like activity in watercress seed germination, mung bean rooting, and wheat leaf chlorophyll retention. In addition, the downstream process applied to raw biomass acted as a pre-treatment to enhance anaerobic digestion performance. After biostimulant extraction, the residual biomass represented 91% of the methane yield from the raw biomass (276 mLCH4·g-1VS). The kinetic profile of the residual biomass was 43% higher than that of the unprocessed biomass. Co-digestion with primary sludge further increased biogas production by 24%. Finally, the concentration of CECs in wastewater was reduced by more than 80%, and only 6 out of 22 CECs analyzed were present in the biostimulant obtained. Most importantly, the concentration of those contaminants was lower than in biosolids that are commonly used in agriculture, ensuring environmental safety.

Treatment of pharmaceutical industry wastewater for water reuse in Jordan using hybrid constructed wetlands

Developing cost-efficient wastewater treatment technologies for safe reuse is essential, especially in developing countries simultaneously facing water scarcity. This study developed and evaluated a hybrid constructed wetlands (CWs) approach, incorporating tidal flow (TF) operation and utilising local Jordanian zeolite as a wetland substrate for real pharmaceutical industry wastewater treatment. Over 273 days of continuous monitoring, the results revealed that the first-stage TFCWs filled with either raw or modified zeolite performed significantly higher reductions in Chemical Oxygen Demand (COD, 58 %-60 %), Total Nitrogen (TN, 32 %-37 %), and Phosphate (PO4, 46 %-64 %) compared to TFCWs filled with normal sand. Water quality further improved after the second stage of horizontal subsurface flow CWs treatment, achieving log removals of 1.09-2.47 for total coliform and 1.89-2.09 for E. coli. With influent pharmaceutical concentrations ranging from 275 to 2000 μg/L, the zeolite-filled hybrid CWs achieved complete removal (>98 %) for ciprofloxacin, ofloxacin, erythromycin, and enrofloxacin, moderate removal (43 %-81 %) for flumequine and lincomycin, and limited removal (<8 %) for carbamazepine and diclofenac. The overall accumulation of pharmaceuticals in plant tissue and substrate adsorption accounted for only 2.3 % and 4.3 %, respectively, of the total mass removal. Biodegradation of these pharmaceuticals (up to 61 %) through microbial-mediated processes or within plant tissues was identified as the key removal pathway. For both conventional pollutants and pharmaceuticals, modified zeolite wetland media could only slightly enhance treatment without a significant difference between the two treatment groups. The final effluent from all hybrid CWs complied with Jordanian treated industry wastewater reuse standards (category III), and systems filled with raw or modified zeolite achieved over 95 % of samples meeting the highest water reuse category I. This study provides evidence of using hybrid CWs technology as a nature-based solution to address water safety and scarcity challenges.

Occurrence, distribution, and ecological risk assessment of pharmaceuticals and personal care products in the surface water of Lipu River, China

Pharmaceuticals and Personal Care Products (PPCPs) are inadvertently released into the aquatic environment, causing detrimental effects on aquatic ecosystem. There is an urgent need of an in-deep investigation on contamination information of PPCPs in aquatic environment as well as the ecological risks to the aquatic ecosystem. This study was carried out in Lipu River basin, China, to investigate the distribution pattern and ecological risks of PPCPs. Results showed that PPCPs pollution is ubiquitous, 29 out of 30 targeted PPCPs were detected in Lipu River. Fourteen PPCPs were detected with a frequency of 100% in all water samples, and ten PPCPs were detected with a frequency of more than 80%. The cumulated PPCPs concentrations ranged from 33.30 ng/L to 99.60 ng/L, with a median value of 47.20 ng/L in Lipu River. Caffeine, flumequine, nifedipine, and lomefloxacin were the predominant PPCPs in study area. Caffeine showed high ecological risk, five and seven individual PPCP showed medium and low ecological risk to algae.

Advances in the process-based models of constructed wetlands and a way forward for integrating emerging organic contaminants

This research examines advancements in the development of process-based models of constructed wetlands (CWs) tailored for simulating conventional water quality parameters (CWQPs). Despite the promising potential of CWs for emerging organic contaminant (EOC) removal, the available CW models do not yet integrate EOC removal processes. This study explores the need and possibility of integrating EOCs into existing CW models. Nevertheless, a few researchers have developed process-based models of other wastewater treatment systems (e.g., activated sludge systems) to simulate certain EOCs. The EOC removal processes observed in other wastewater treatment systems are analogous to those in CWs. Therefore, the corresponding equations governing these processes can be tailored and integrated into existing CW models, similarly to what was done successfully in the past for CWQPs. This study proposed the next generation of CW models, which outlines 12 areas for future work: integrating EOC removal processes; ensuring data availability for model calibration and validation; considering quantitative and sensitive parameters; quantifying microorganisms in CWs; modifying biofilm dynamics models; including pH, aeration, and redox potential; integrating clogging and plant sub-models; modifying hydraulic sub-model; advancing computer technology and programming; and maintaining a balance between simplicity and complexity. These suggestions provide valuable insights for enhancing the design and operational features of current process-based models of CWs, facilitating improved simulation of CWQPs, and integration of EOCs into the modelling framework.

Meta-analysis review for pilot and large-scale constructed wetlands: Design parameters, treatment performance, and influencing factors

Despite their longstanding use in environmental remediation, constructed wetlands (CWs) are still topical due to their sustainable and nature-based approach. While research and review publications have grown annually by 7.5 % and 37.6 %, respectively, from 2018 to 2022, a quantitative meta-analysis employing advanced statistics and machine learning to assess CWs has not yet been conducted. Further, traditional statistics of mean ± standard deviation could not convey the extent of confidence or uncertainty in results from CW studies. This study employed a 95 % bootstrap-based confidence interval and out-of-bag Random Forest-based driver analysis on data from 55 studies, totaling 163 cases of pilot and full-scale CWs. The study recommends, with 95 % confidence, median surface hydraulic loading rates (HLR) of 0.14 [0.11, 0.17] m/d for vertical flow-CWs (VF) and 0.13 [0.07, 0.22] m/d for horizontal flow-CWs (HF), and hydraulic retention time (HRT) of 125.14 [48.0, 189.6] h for VF, 72.00 [42.00, 86.28] h for HF, as practical for new CW design. Permutation importance results indicate influent COD impacted primarily on COD removal rate at 21.58 %, followed by HLR (16.03 %), HRT (12.12 %), and substrate height (H) (10.90 %). For TN treatment, influent TN and COD were the most significant contributors at 12.89 % and 10.01 %, respectively, while H (9.76 %), HRT (9.72 %), and HLR (5.87 %) had lower impacts. Surprisingly, while HRT and H had a limited effect on COD removal, they substantially influenced TN. This study sheds light on CWs' performance, design, and control factors, guiding their operation and optimization.

Influence of vegetation and substrate type on removal of emerging organic contaminants and microbial dynamics in horizontal subsurface constructed wetlands

Constructed wetlands (CWs) offer an efficient alternative technology for removing emerging organic contaminants (EOCs) from wastewater. Optimizing CW performance requires understanding the impact of CW configuration on EOC removal and microbial community dynamics. This study investigated EOC removal and microbial communities in horizontal subsurface flow (HSSF) CWs over a 26-month operational period. Comparison between tuff-filled and gravel-filled CWs highlighted the superior EOC removal in tuff-filled CWs during extended operation, likely caused by the larger surface area of the tuff substrate fostering microbial growth, sorption, and biodegradation. Removal of partially positively charged EOCs, like atenolol (29-98 %) and fexofenadine (21-87 %), remained constant in the different CWs, and was mainly attributed to sorption. In contrast, removal rates for polar non-sorbing compounds, including diclofenac (3-64 %), acyclovir (9-85 %), and artificial sweeteners acesulfame (5-60 %) and saccharin (1-48 %), seemed to increase over time due to enhanced biodegradation. The presence of vegetation and different planting methods (single vs. mixed plantation) had a limited impact, underscoring the dominance of substrate type in the CW performance. Microbial community analysis identified two stages: a startup phase (1-7 months) and a maturation phase (19-26 months). During this transition, highly diverse communities dominated by specific species in the early stages gave way to more evenly distributed and relatively stable communities. Proteobacteria and Bacteroidetes remained dominant throughout. Alphaproteobacteria, Acidobacteria, Planctomycetes, Salinimicrobium, and Sphingomonas were enriched during the maturation phase, potentially serving as bioindicators for EOC removal. In conclusion, this study emphasizes the pivotal role of substrate type and maturation in the removal of EOCs in HSSF CW, considering the complex interplay with EOC physicochemical properties. Insights into microbial community dynamics underscore the importance of taxonomic and functional diversity in assessing CW effectiveness. This knowledge aids in optimizing HSSF CWs for sustainable wastewater treatment, EOC removal, and ecological risk assessment, ultimately contributing to environmental protection.

Hydroponic materials improve organic micropollutant removal in vertical flow constructed wetlands treating wastewater

Unconventional substrata like activated carbon or clay beads can enhance micropollutant removal in constructed wetlands. However, hydroponic materials widely used in horticulture have not yet been investigated for their potential to remove micropollutants. In addition, potential effect of plant species other than reeds on micropollutant removal has not been sufficiently investigated. Therefore, a nature-based, post-treatment technology called improved vertical flow constructed wetlands (CW) with hydroponic (H) materials (CWH) was designed by employing cocopeat and mineral with ornamental plant species syngonium and periwinkle. A mesocosm CWH system was tested in a climate-controlled greenhouse for 550 days for its potential to remove frequently found micropollutants in wastewater, namely sulfamethoxazole, trimethoprim, diclofenac, erythromycin, carbamazepine, pyrimethanil, tebuconazole, pymetrozine, atrazine and DEET from wastewater effluent. The main focus was to understand the contribution of sorption, microbial degradation and phytoremediation on the removal of those micropollutants. It was found that cocopeat showed a capacity for sorbing micropollutants, ranging between 80 and 99% of the compounds added while less than 10% sorption was observed for mineral wool. Additionally moderate to high biological removal (25-60 μg of compound/kg dry weight of substratum/day) for most of the studied compounds was observed in all the cocopeat biotic groups. Furthermore, it could be stated that plants appear not to be an important factor for micropollutant removal. The observed differences in removal between the cocopeat and mineral wool systems could be explained by the difference in physico-chemical properties of the substrata, where cocopeat has a higher water holding capacity, moisture content, nutrient and organic matter content, and a higher intraparticle porosity and surface area. This study revealed notable removal of persistent and mobile micropollutants in cocopeat CWH, namely carbamazepine (80-86%) and diclofenac (97-100%). These results demonstrate the potential beneficial use of hydroponic materials as substratum in more advanced constructed wetlands designed to remove micropollutants.

New developments on vermifiltration as a bio-ecological wastewater treatment technology: Mechanism, application, performance, modelling, optimization, and sustainability

The review discusses the advancements in vermifiltration research over the last decade, focusing on pollution removal mechanisms, system performance, the fate of filter components, and by-products. Vermifiltration has demonstrated remarkable capabilities, particularly in treating highly contaminated wastewater with Chemical Oxygen Demand (COD) levels exceeding 92,000 mg/L and Biochemical Oxygen Demand (BOD5) levels over 25,000 mg/L, achieving removal rates of approximately 89% and 91%, respectively. Importantly, vermifiltration maintains its effectiveness even with fluctuating organic loads at the inlet, thanks to optimization of parameters like Hydraulic Loading Rate, biodegradable organic strength, earthworm density and active layer depth. Clogging issues can be minimized through parameters optimization. The review also highlights vermifiltrations' potential in co-treating the organic fraction of municipal solid waste while significantly reducing heavy metal concentrations, including Cd, Ni, Pb, Cu, Cr, and Zn, during the treatment process. Earthworms play a pivotal role in the removal of various components, with impressive removal percentages, such as 75% for Total Organic Carbon (TOC), 86% for Total COD, 87% for BOD5, 59% for ammonia nitrogen, and 99.9% for coliforms. Furthermore, vermifiltration-treated effluents can be readily utilized in agriculture, with the added benefit of producing vermicompost, a nutrient-rich biofertilizer. The technology contributes to environmental sustainability, as it helps reduce greenhouse gas emissions (GHG), thanks to earthworm activity creating an aerobic environment, minimizing GHG production compared to other wastewater treatment methods. In terms of pollutant degradation modeling, the Stover-Kincannon model outperforms the first-order and Grau second-order models, with higher regression coefficients (R2 = 0.9961 for COD and R2 = 0.9353 for TN). Overall, vermifiltration emerges as an effective and sustainable wastewater treatment solution, capable of handling challenging wastewater sources, while also producing valuable by-products and minimizing environmental impacts.

Effects of bed depths and the ratio of aerobic to anaerobic zone on the performance of horizontal subsurface flow macrophyte-assisted high-rate vermifilters treating synthetic brewery wastewater

Effects of total vermibed depth, as well as the ratio of aerobic (the unsubmerged) to anaerobic (the submerged) zone on the performance of the horizontal subsurface flow macrophyte-assisted vermifilters (HSSF-MAVFs) treating synthetic brewery wastewater at a higher hydraulic loading rate (HLR), were investigated for the first time. Results showed that the HSSF-MAVF with a 50 cm total and 18 cm submerged vermibed depth yielded the optimum removal of the pollutants, ensuring a (91.2 ± 1.7)%, (81.8 ± 1.9)%, (67.4 ± 3.9)%, and (63.1 ± 2.3)% removal of chemical oxygen demand (COD), ammonium N (NH4 + -N), total N (TN), and organic N, respectively, whereas there was an increase of (142 ± 6.3)% in the effluent nitrate-N (NO3 - -N) than that in the influent. At the optimum condition, the effluent concentrations of all the pollutants including COD, NH4 + -N, NO3 - -N, TN, and organic N were well below the surface water discharge standards specified by the Central Pollution Control Board (CPCB), and thus, the effluent of the HSSF-MAVF could be safely discharged into the surface water bodies. PRACTITIONER POINTS: Total vermibed depth of HSSF-MAVFs was optimized for organic and nitrogen removal. HSSF-MAVFs were subjected to the higher HLR of synthetic brewery wastewater. Removal of COD and NH4 + -N was decreased with the increase in submerged bed depth. Removal of organic N and TN was increased with the increase in submerged bed depth. Total/unsubmerged bed depth had a positive impact on the organic and N removal.

Effective removal of iron, nutrients, micropollutants, and faecal bacteria in constructed wetlands cotreating mine water and sewage treatment plant effluent

Regulators in England and Wales have set new targets under the Environment Act 2021 for freshwater quality by 2038 that include halving the length of rivers polluted by harmful metals from abandoned mines and reducing phosphorus loadings from treated wastewater by 80%. In this context, an intriguing win-win opportunity exists in the removal of iron from abandoned mines and phosphate from small sewage treatment plants by coprecipitation in constructed wetlands (CWs). We investigated such a CW located at Lamesley, Northeast England, which cotreats abandoned coal mine and secondary-treated sewage treatment plant effluents. We assessed the removal of nutrients, heavy metals, organic micropollutants, and faecal coliforms by the CW, and characterized changes in the water bacteriology comprehensively using environmental DNA. The CW effectively removed ammonium-nitrogen, phosphorus, iron, and faecal coliforms by an average of 86, 74, 98, and 75%, respectively, to levels below or insignificantly different from those in the receiving river. The CW also effectively removed micropollutants such as acetaminophen, caffeine, and sulpiride by 70-100%. Molecular microbiology methods showed successful conversion of sewage and mine water microbiomes into a freshwater microbiome. Overall, the CW significantly reduced impacts on the rural water environment with minimal operational requirements.

Persistent Trace Organic Contaminants Are Transformed Rapidly under Sulfate- and Fe(III)-Reducing Conditions in a Nature-Based Subsurface Water Treatment System

Subsurface treatment systems, such as constructed wetlands, riverbank filtration systems, and managed aquifer recharge systems, offer a low-cost means of removing trace organic contaminants from treated municipal wastewater. To assess the processes through which trace organic contaminants are removed in subsurface treatment systems, pharmaceuticals and several major metabolites were measured in porewater, sediment, and plants within a horizontal levee (i.e., a subsurface flow wetland that receives treated municipal wastewater). Concentrations of trace organic contaminants in each wetland compartment rapidly declined along the flow path. Mass balance calculations, analysis of transformation products, microcosm experiments, and one-dimensional transport modeling demonstrated that more than 60% of the contaminant removal could be attributed to transformation. Monitoring of the system with and without nitrate in the wetland inflow indicated that relatively biodegradable trace organic contaminants, such as acyclovir and metoprolol, were rapidly transformed under both operating conditions. Trace organic contaminants that are normally persistent in biological treatment systems (e.g., sulfamethoxazole and carbamazepine) were removed only when Fe(III)- and sulfate-reducing conditions were observed. Minor structural modifications to trace organic contaminants (e.g., hydroxylation) altered the pathways and extents of trace organic contaminant transformation under different redox conditions. These findings indicate that subsurface treatment systems can be designed to remove both labile and persistent trace organic contaminants via transformation if they are designed and operated in a manner that results in sulfate-and Fe(III)-reducing conditions.

ZnO-Zn2TiO4 heterostructure for highly efficient photocatalytic degradation of pharmaceuticals

In this study, ZnO-Zn2TiO4 (ZTM) material was prepared through a novel synthesis method based on a ultrasound-assisted polyol-mediated process followed by calcination at a different temperature. Physical features of the samples were studied by using various analysis techniques including XRD, FT-IR, SEM/EDX, pHPZC, and UV-Vis DRS. Subsequently, the materials were employed as catalysts for the photocatalytic degradation of clofibric acid as a model pharmaceutical contaminant. The photocatalytic performance was evaluated under different conditions of calcination temperature, catalyst dosage, starting concentration, and initial pH of clofibric acid solution. The finding results revealed that hexagonal-tetragonal phases of ZnO-Zn2TiO4 calcined at 600 °C (ZTM-600) with an average crystallite size of 97.8 Å exhibited the best degradation efficiency (99%). The primary bands characteristic of ZnO and Zn2TiO4 were displayed by FT-IR analysis and the UV-visible DRS confirms the larger absorption capacity in UV-visible regions. The photogenerated electrons are the powerful reactive species involved in clofibric acid photodegradation process. This study shows a promising photocatalyst and provides new sight to rational design the facets of photocatalysis process for enhanced photocatalytic performances and effective wastewater treatment.

Insight into pharmaceutical and personal care products removal using constructed wetlands: A comprehensive review

Pharmaceutical and personal care products (PPCPs) were regarded as emerging environmental pollutants due to their ubiquitous appearance and high environmental risks. The wastewater treatment plants (WWTPs) became the hub of PPCPs receiving major sources of PPCPs used by humans. Increasing concern has been focused on promoting cost-effective ways to eliminate PPCPs within WWTPs for blocking their route into the environment through effluent discharging. Among all advanced technologies, constructed wetlands (CWs) with a combination of plants, substrates, and microbes attracted attention due to their cost-effectiveness and easier maintenance during long-term operation. This study offers baseline data for risk control and future treatment by discussing the extent and dispersion of PPCPs in surface waters over the past ten years and identifying the mechanisms of PPCPs removal in CWs based on the up-to-present research, with a special focus on the contribution of sediments, vegetation, and the interactions of microorganisms. The significant role of wetland plants in the removal of PPCPs was detailed discussed in identifying the contribution of direct uptake, adsorption, phytovolatilization, and biodegradation. Meanwhile, the correlation between the physical-chemical characteristics of PPCPs, the configuration operation of wetlands, as well as the environmental conditions with PPCP removal were also further estimated. Finally, the critical issues and knowledge gaps before the real application were addressed followed by promoted future works, which are expected to provide a comprehensive foundation for study on PPCPs elimination utilizing CWs and drive to achieve large-scale applications to treat PPCPs-contaminated surface waters.

Efficient Wastewater Treatment and Removal of Bisphenol A and Diclofenac in Mesocosm Flow Constructed Wetlands Using Granulated Cork as Emerged Substrate

Constructed wetlands (CWs) are considered as low-cost and energy-efficient wastewater treatment systems. Media selection is one of the essential technical keys for their implementation. The purpose of this work was essentially to evaluate the removal efficiency of organic pollution and nitrogen from municipal wastewater (MWW) using different selected media (gravel/gravel amended with granulated cork) in mesocosm horizontal flow constructed wetlands (HFCWs). The results showed that the highest chemical oxygen demand (COD) and ammonium nitrogen removal of 80.53% and 42%, respectively, were recorded in the units filled with gravel amended with cork. The influence of macrophytes (Phragmites australis and Typha angustifolia) was studied and both species showed steeper efficiencies. The system was operated under different hydraulic retention times (HRTs) i.e., 6 h, 24 h, 30 h, and 48 h. The obtained results revealed that the COD removal efficiency was significantly enhanced by up to 38% counter to the ammonium rates when HRT was increased from 6 h to 48 h. Moreover, the removal efficiency of two endocrine-disrupting compounds (EDCs) namely, bisphenol A (BPA) and diclofenac (DCF) was investigated in two selected HFCWs, at 48 h HRT. The achieved results proved the high capacity of cork for BPA and DCF removal with the removal rates of 90.95% and 89.66%, respectively. The results confirmed the role of these engineered systems, especially for EDC removal, which should be further explored.

Use of constructed wetlands to prevent overloading of wastewater treatment plants

The fluctuation in the number of people in tourist areas affects the wastewater quality and quantity. Constructed wetlands (CWs) aim to simulate physical, chemical, and biological processes occurring in natural environments for wastewater treatment and are considered a sustainable system. The current study aimed at evaluating the effectiveness of in-vessel CWs for supporting the wastewaters treatment plants in periods of overloading. Such approach can be quickly implementable, economic, and the CWs can be fast regenerated in the framework of sustainable good practices. Three pilot scale CWs were prepared in as many containers layering 10 cm of gravel, 60 cm of sand and 10 cm of gravel, and placing pieces of giant reed rhizomes in the upper layers. The bottom of each CW had a tap, and CWs were irrigated with a real municipal sewage three times a week. Before each new irrigation, the tap was opened, and the effluent collected for determining gross parameters, elemental composition, and contaminants of emerging concern (CECs). CWs significantly reduced almost all gross parameters considered and half the CECs, except for a couple of metabolites of corresponding parental compounds. With regards to the potentially toxic elements, all reduced their concentration from the influents to the effluents. The results of this study were promising and highlighted good efficiency of constructed wetlands as pre-treatment of real municipal sewage to reduce the overloading of the wastewater treatment plant.

Vermifiltration: Strategies and techniques to enhance the organic and nutrient removal performance from wastewater

The vermifiltration (VF) technology has gained significant attention as a green alternative for remediating domestic and industrial wastewater over the last few decades. Of late, the implementation of various modifications to the orthodox VF technology, including tweaks in the design and operation of the vermifilters, has been portrayed in the available literature. However, owing to the scatteredness of the available information, the knowledge regarding the execution of the modified vermifilters is still inadequate. Hence, an effort has been made to comprehensively overview the innovative strategies and techniques adopted to improve the organic and nutrient removal potential of the VFs from wastewater. In addition, future perspectives have been recognized to design more efficient and sustainable VFs. This review explores more of such novel tactics to improve the performance of the VF technology regarding organic and nutrient removal from wastewater. PRACTITIONER POINTS: Innovative strategies and techniques implemented to VF technology were comprehensively overviewed. Design modification and advantages of each innovation were highlighted. The pollutant removal performance of every modification was emphasized. Modified vermifilters were better than the conventional vermifilters in terms of organic and nutrient removal from the wastewater.

Removal of pharmaceuticals by vertical flow constructed wetland with different configurations: Effect of inlet load and biochar addition in the substrate

Pharmaceuticals (PCs) residues are considered an emerging threat to the environment due to their persistency, ecotoxicity and bioaccumulative nature. To study the PC (amoxicillin, AMX; caffeine, CF; ibuprofen, IBU) removal efficiency of vertical flow constructed wetland (VFCW), three setups of VFCWs were configured: SB (substrate matrix + biochar (BC)); SBP (substrate matrix + BC + plant); SP (substrate matrix + plant) and changes in effluent PC load was estimated at 24, 48, 72, 96, 120, 144 and 168 h intervals. SBP with an influent load of 1,000 μg L^-1 showed the maximum removals of 75.51% (AMX), 87.53% (CF), and 79.93% (IBU) significantly higher than that of SB and SP (p < 0.00). Results showed an inverse relationship between removal efficacy and influent PCs loading. The average removal (%) by VFCWS (of all studied setups) was in the order: 66.20 > 47.88 > 39.0 (IBU), 56.56 > 42.12 > 34.36 (AMX), and 74.13 > 64.0 > 52.07 (CF) with 1,000, 5,000 > 10,000 μg L^-1 influent load, respectively. The maximum removal of COD, NH₄⁺-N, and NO₃-N was recorded at 88.8%, 83.1%, and 64.9%, respectively in SBP, and their removal was hardly affected by influent PC concentration. In summary, planted VFCW spiked with BC could be a viable approach for the removal of PCs in wastewater. The impact of PC load on plant toxicity in VFCWs can be taken as a research problem for future work in this series.

Insights into the fate of antibiotics in constructed wetland systems: Removal performance and mechanisms

Antibiotics have been recognized as emerging contaminants that are widely distributed and accumulated in aquatic environment, posing a risk to ecosystem at trace level. Constructed wetlands (CWs) have been regarded as a sustainable and cost-effective alternative for efficient elimination of antibiotics. This review summarizes the removal of 5 categories of widely used antibiotics in CWs, and discusses the roles of the key components in CW system, i.e., substrate, macrophytes, and microorganisms, in removing antibiotics. Overall, the vertical subsurface flow CWs have proven to perform better in terms of antibiotic removal (>78%) compared to other single CWs. The adsorption behavior of antibiotics in wetland substrates is determined by the physicochemical properties of antibiotics, substrate configuration and operating parameters. The effects of wetland plants on antibiotic removal mainly include direct (e.g., plant uptake and degradation) and indirect (e.g., rhizosphere processes) manners. The possible interactions between microorganisms and antibiotics include biosorption, bioaccumulation and biodegradation. The potential strategies for further enhancement of the antibiotic removal performance in CWs included optimizing operation parameters, innovating substrate, strengthening microbial activity, and integrating with other treatment technologies. Taken together, this review provides useful information for facilitating the development of feasible, innovative and intensive antibiotic removal technologies in CWs, as well as enhancing the economic viability and ecological sustainability.

Removal of emerging pollutants by a 3-step system: Hybrid digester, vertical flow constructed wetland and photodegradation post-treatments

The removal of emerging pollutants from municipal wastewater was studied for the first time using a three-step pilot-scale system: 1) hybrid digester (HD) as first step, 2) subsurface vertical flow constructed wetland (VF) as second step, and 3) photodegradation (PD) unit as third step or post-treatment. The HD and VF units were built and operated in series with effluent recirculation at pilot scale. For the PD post-treatment, three alternatives were studied at lab-scale, i) UVC irradiation at 254 nm (0.5 h exposure time), ii) UVA irradiation at 365 nm using a TiO₂-based photocatalyst and iii) sunlight irradiation using a TiO₂-based photocatalyst, the last two for 1 and 2 h. Alternative iii) was also tested at pilot-scale. Degradation of nine compounds was evaluated: acetaminophen (ACE), caffeine (CAF), carbamazepine (CBZ), ketoprofen (KET), ibuprofen (IBU), diclofenac (DCL), clofibric acid (ACB), bisphenol A (BPA), and sotalol (SOT). Overall, the HD-VF-UVC system completely removed (>99.5 %) ACE, CAF, KET, IBU, DCL and ACB, and to a lesser extent SOT (98 %), BPA (83 %) and CBZ (51 %). On the other hand, the HD-VF-UVA/TiO₂ system (at 2 h) achieved >99.5 % removal of ACE, CAF, KET, IBU and DCL while ACB, BPA, CBZ and SOT were degraded by 83 %, 81 %, 78 % and 68 %, respectively. Working also at 2 h of exposure time, in summer conditions, the HD-VF-Sol/TiO₂ system achieved >99.5 % removal of ACE, CAF, KET, IBU, DCL and ACB, and to a minor extent BPA (80 %), SOT (74 %) and CBZ (69 %). Similar results, although slightly lower for SOT (60 %) and CBZ (59 %), were obtained in the pilot sunlight plus TiO₂ catalyst unit. However, the use of sunlight irradiation with a TiO₂-based photocatalyst clearly showed lower removal efficiency in autumn conditions (i.e., 47 % SOT, 31 % CBZ).

Uptake, Occurrence, and Effects of Nonsteroidal Anti-Inflammatory Drugs and Analgesics in Plants and Edible Crops

The plant uptake of pharmaceuticals that include nonsteroidal anti-inflammatory drugs (NSAIDs) and analgesics from contaminated environment has benefits and drawbacks. These pharmaceuticals enter plants mostly through irrigation with contaminated water and application of sewage sludge as soil fertilizer. Aquatic plants withdraw these pharmaceuticals from water through their roots. Numerous studies have observed the translocation of these pharmaceuticals from the roots into the aerial tissues. Furthermore, the occurrence of the metabolites of NSAIDs in plants has been observed. This article provides an in-depth critical review of the plant uptake of NSAIDs and analgesics, their translocation, and toxic effects on plant species. In addition, the occurrence of metabolites of NSAIDs in plants and the application of constructed wetlands using plants for remediation are reviewed. Factors that affect the plant uptake and translocation of these pharmaceuticals are examined. Gaps and future research are provided to guide forthcoming investigations on important aspects that worth explorations.

Alternanthera spp. based-phytoremediation for the removal of acetaminophen and methylparaben at mesocosm-scale constructed wetlands

Recently, the spread of pharmaceuticals and personal care products (PPCPs) in the aquatic environment has steadily increased. In this study, phytoremediation technology, using an ornamental plant (Alternanthera spp.), was investigated to improve the removal of acetaminophen (AC) and methylparaben (MP) from a synthetically prepared wastewater. Three exposure lines (AC-line, MP-line and control-line) were performed with a total of 26 subsurface-horizontal constructed wetlands (SSH-CWs) that operated in batch feeding mode. The influence of plants in addition to the initial spiking concentration (20, 60 and 100 mg/L) of AC and MP on the removal efficiency was evaluated throughout the 35-days experiments. The highest removal efficiencies for AC and MP were 88.6% and 66.4%, respectively, achieved in the planted CWs; whereas only 29.7% and 21.9% were achieved in the control CWs for AC and MP, respectively. The results confirmed the role of Alternanthera spp. for accelerating the removal of AC and MP from synthetically contaminated wastewater in CWs.

Prediction of the removal efficiency of emerging organic contaminants in constructed wetlands based on their physicochemical properties

This study investigates the prediction of the removal efficiency of emerging organic contaminants (EOCs) (pharmaceuticals-PhCs, personal care products-PCPs, and steroidal hormones-SHs) in constructed wetlands based on their physicochemical properties (e.g., molecular weight-MW, octanol-water partition coefficient-Log Kow, soil organic carbon sorption coefficient-Log Koc, octanol-water distribution coefficient-Log Dow, and dissociation constant-pKa). The predictive models are formed based on statistical analysis underpinned by principle component, correlation, and regression analyses of a global data set compiled from peer-reviewed publications. The results show that the physicochemical properties of EOCs emerged as good predictors of their removal efficiency. Log Koc, Log Dow, and Log Kow are the most significant predictors, and combination with MW and/or pKa often improved the reliability of the predictions. The best performing model for PhCs was composed of MW, Log Dow, and Log Koc (coefficient of determination-R²: 0.601; probability value-p < 0.05; root mean square error-RMSE: training set: 11%; test set: 27%). Log Kow and Log Koc for PCPs (R²: 0.644; p < 0.1; RMSE: training set: 14%; test set: 14%), and a combination of MW, Log Kow, and pKa for SHs (R²: 0.941; p < 0.1; RMSE: training set: 3%; test set: 15%) formed the plausible models for predicting the removal efficiency. Similarly, reasonably good combined models could be formed in the case of PhCs and SHs or PCPs and SHs, although their individual models were comparatively better. A novel decision support tool, named as REOCW-PCP, was developed to readily estimate the removal efficiency of EOCs, and facilitate the decision-making process.

A review on the role of plant in pharmaceuticals and personal care products (PPCPs) removal in constructed wetlands

Pharmaceuticals and personal care products (PPCPs) cause ongoing water pollution and consequently have attracted wide attention. Constructed wetlands (CWs) show good PPCP removal performance through combined processes of substrates, plants, and microorganisms; however, most published research focuses on the role of substrates and microorganisms. This review summarizes the direct and indirect roles of wetland plants in PPCP removal, respectively. These direct effects include PPCP precipitation on root surface iron plaque, and direct absorption and degradation by plants. Indirect effects, which appear more significant than direct effects, include enhancement of PPCP removal through improved rhizosphere microbial activities (more than twice as much as bulk soil) stimulated by radial oxygen loss and exudate secretions, and the formation of supramolecular ensembles from PPCPs and humic acids from decaying plant materials which improving PPCPs removal efficiency by up to four times. To clarify the internal mechanisms of PPCP removal by plants in CWs, factors affecting wetland plant performance were reviewed. Based on this review, future research needs have been identified.

Comparison of advanced biological treatment and nature-based solutions for the treatment of pharmaceutically active compounds (PhACs): A comprehensive study for wastewater and sewage sludge

Passing of pharmaceutical residues into environment in an uncontrolled manner as a result of continuous increase in drug consumption across the globe has become a threatening problem for the ecosystems and almost all living creatures. In this study, diclofenac (DCF), carbamazepine (CBZ), 17β-estradiol (17β-E2) and 17α-ethynylestradiol (EE2) belonging to different therapeutic classes were investigated simultaneously in advanced biological treatment and nature-based treatments during 12-months sampling campaign. In this context, behavior patterns of pharmaceutically active compounds (PhACs) throughout the both wastewater and sludge lines in advanced biological wastewater treatment plant (WWTP), wastewater stabilization pond (WSP) and constructed wetland (CW) were discussed in detail based on each treatment processes seasonally. Furthermore, statistically evaluated data obtained in full-scale WWTPs were compared with each other in order to determine the valid removal mechanisms of these pharmaceutical compounds. While DCF and CBZ were detected very intensively both in the wastewater and sludge lines of the investigated WWTPs, steroid hormones,17β-E2 and EE2, were determined below the LOQ value in general. Annual average removal efficiencies achieved in studied WWTPs for DCF ranged between -23.3% (in CW) and 75.2% (in WSP), while annual average removal rates obtained for CBZ varied between -20.7% (in advanced biological treatment) and 10.0% (in CW). It has been found that DCF was highly affected by different wastewater treatment processes applied in the WWTPs compared to CBZ which showed extraordinary resistance to all different treatment processes. Although calculated in different rates for each compounds, biodegradation/biotransformation and sorption onto sewage sludge were determined as the main removal mechanisms for PhACs in plants. Although showed a similar behavior in the sludge dewatering unit (decanter) present in the advanced biological WWTP, quite different behaviors observed in the anaerobic digester for DCF (up to 15% decrease) and CBZ (up to 95% increase). Sorption and desorption behaviors of DCF and CBZ were also evaluated in the sludge treatment processes found in advanced biological WWTP. Percentages of originated extra annual average of pharmaceutical loads were calculated as 0.64% and 0.90% for DCF and CBZ, respectively in the advanced biological WWTP due to the sidestream caused by the sludge dewatering unit.

Boosting pharmaceutical removal through aeration in constructed wetlands

This work evaluated the removal efficiency of 13 wastewater-borne pharmaceuticals in a pilot constructed wetland (CW) operated under different aeration strategies (no aeration, intermittent and continuous). Aeration improved the removal of conventional wastewater parameters and the targeted micropollutants, compared to the non-aerated treatment. Reduction of chemical oxygen demand (COD) and total nitrogen (TN) was slightly higher applying intermittent aeration than applying continuous aeration, the opposite was observed for the investigated pharmaceuticals. Seven targeted compounds were found in influent wastewater, and five of them (acetaminophen, diclofenac, ketoprofen, bezafibrate and gemfibrozil) were efficiently removed (> 83%) in the aerated systems. The overall risk of the investigated samples against aquatic ecosystems was moderate, decreasing in the order influent > no aeration > intermittent aeration > continuous aeration, based on the hazard quotient approach. Lorazepam, diclofenac and ketoprofen were the pharmaceuticals that could contribute the most to this potential environmental impact of the CW effluents after discharge. To the authors' knowledge this is the first sound study on the removal and fate of ketoprofen, bezafibrate, and lorazepam in aerated CWs, and provides additional evidence on the removal and fate of acetaminophen, diclofenac, gemfibrozil, and carbamazepine in this type of bioremediation systems at pilot plant scale.

The anaerobic biodegradation of emerging organic contaminants by horizontal subsurface flow constructed wetlands

The horizontal subsurface flow constructed wetland (HFCW) is widely studied for the treatment of wastewater containing emerging organic contaminants (EOCs): pharmaceuticals, personal care products, and steroidal hormones. This study evaluates the performance of HFCW for the removal of these types of EOCs based on the data collected from peer-reviewed journal publications. In HFCW, anaerobic biodegradation is an important removal mechanism of EOCs besides their removal by the filter media (through sedimentation, adsorption, and precipitation) and plant uptake. The average removal efficiency of 18 selected EOCs ranged from 39% to 98%. The moderate to higher removal efficiency of 12 out of 18 selected EOCs in HFCW indicates the suitability of this type of constructed wetland (CW) for the treatment of wastewater containing these EOCs. The reasonably good removal (>50% in most of the cases) of these EOCs in HFCW might be due to the occurrence of anaerobic biodegradation as one of their major removal mechanisms in CWs. Although the effluent concentration of EOCs was substantially decreased after the treatment, the environmental risk posed by them was not fully reduced in most of the cases. For instance, estimated risk quotient of 11 out of 18 examined EOCs was extremely high for the effluent of HFCW.

Pharmaceutical compound removal efficiency by a small constructed wetland located in south Brazil

The fate of pharmaceuticals during the treatment of effluents is of major concern since they are not completely degraded and because of their persistence and mobility in environment. Indeed, even at low concentrations, they represent a risk to aquatic life and human health. In this work, fourteen pharmaceuticals were monitored in a constructed wetland wastewater treatment plants (WWTP) assessed in both influent and effluent samples. The basic water quality parameters were evaluated, and the removal efficiency of pharmaceutical, potential for bioaccumulation, and the impact of WWTP were assessed using Polar Organic Chemical Integrative Sampler (POCIS) and biofilms. The pharmaceutical compounds were quantified by High Performance Liquid chromatography coupled to mass spectrometry. The sampling campaign was carried out during winter (July/2018) and summer (January/2019). The WWTP performed well regarding the removal of TSS, COD, and BOD₅ and succeeded to eliminate a significant part of the organic and inorganic pollution present in domestic wastewater but has low efficiency regarding the removal of pharmaceutical compounds. Biofilms were shown to interact with pharmaceuticals and were reported to play a role in their capture from water. The antibiotics were reported to display a high risk for aquatic organisms.

A decision tree framework to support design, operation, and performance assessment of constructed wetlands for the removal of emerging organic contaminants

There is an increasing focus on research related to the removal of emerging organic contaminants (EOCs) from wastewater by using constructed wetlands (CWs). However, research is lacking on translating the available scientific evidence into decision support tools. In this paper, a novel decision tree framework is developed and demonstrated. The proposed framework consists of five steps: (1) generate a list of EOCs by the analysis of the wastewater; (2) select the best type of CW for each of the selected EOCs; (3) select a final type of CW for the removal of the selected EOCs; (4) identify detailed design and operational features of the proposed CW such as, depth, area, plants, support matrix, hydraulic loading rate, organic loading rate, and hydraulic retention time; and (5) assess the expected removal efficiency of EOCs in the selected CW. A novel decision support tool, named as DTFT-CW, was developed to generate data and information for the application of the proposed decision tree framework. DTFT-CW (given as a supplementary material) was developed using Microsoft Excel 2016 to support decisions on the design, operation, and performance of CWs for the removal of 59 EOCs (33 pharmaceuticals-PhCs, 15 personal care products-PCPs, and 11 steroidal hormones-SHs). The paper demonstrates the usefulness of the developed decision-making tools by considering 19 EOCs (13 PhCs, one PCPs, and five SHs) as an example, which pose high environmental risk and are on the European Union watch list (six of the 19 EOCs). An integrated design of HCW (combining vertical flow CW, horizontal flow CW-HFCW, and free water surface CW) is recommended for the treatment of multiple EOCs instead of a single type of CW such as HFCW that is most widely used in practice. The proposed tools could be useful for decision makers such as policy makers, design engineers, and researchers.

A review of the biotransformations of priority pharmaceuticals in biological wastewater treatment processes

Wastewater effluent discharges have been considered as one of the main sources of synthetic chemicals entering into the aquatic environment. Even though they occur at low concentrations, pharmaceutically active compounds (PhACs) can have an impact on ecological toxicity that affects aquatic organisms. Moreover, new regulations in development toward preserving water quality reinforces the increasing need to monitor and abate some PhACs in wastewater treatment plants (WWTPs), where they are typically only partially eliminated. Unlike most previous reviews, we have focussed on how the main biological and chemical molecular factors impact the biotransformations of key PhACs in biological WWTP processes. Biotransformations have been found to be an important contributor towards the removal of PhACs from WWTP effluents. This review paper critically assesses these aspects and the recent advances that have been achieved in wastewater treatment processes for biodegradation of 7 PhACs; namely the non-steroidal anti-inflammatory drug (NSAID) diclofenac (DCF); the macrolide antibiotics azithromycin (AZM), erythromycin (ERY) and clarithromycin (CLR); the two natural estrogens estrone (E1) and 17β-estradiol (E2), and the synthetic estrogen 17α-ethinylesradiol (EE2). These represent the micropollutants of the EU Watch list in Decision 2015/495/EU that are most relevant to WWTPs due to their frequent detection. The metabolic pathways, transformation products and impact of relevant factors to biological WWTP processes is addressed in this review. The biokinetics of PhAC biodegradation in different engineered bioprocesses is also discussed. Promising technologies and operational strategies that are likely to have a high impact on controlling PhAC releases are highlighted and future research needs are also proposed.

Occurrence and removal of pharmaceutical and personal care products using subsurface horizontal flow constructed wetlands

A significant number of emerging pollutants resulting from point source and diffuse pollution are present in the aquatic environment. These are chemicals that are not commonly monitored, but have the potential to cause adverse effects on human and ecological health. One form of emerging pollutants, pharmaceutical and personal care products (PPCPs), are becoming a serious problem in the discharge of domestic wastewater. Therefore, the aim of this study was to determine their occurrence in wastewater and surface waters, and to evaluate the efficiency of subsurface horizontal flow constructed wetlands (planted in polyculture and unplanted), in removing two pharmaceuticals: carbamazepine (Cbz) and sildenafil (Sil); and a personal care product: methylparaben (Mp), present in domestic wastewater. The mixed PPCPs were added to wetlands, at nominal concentrations of 200 μg / L for each compound. The working flow of the reactors was 15 mL / min and the hydraulic retention time was three days. The physicochemical parameters evaluated were: organic load, dissolved oxygen, temperature, conductivity, redox potential, dissolved solids, pH and PPCPs concentration. The presence of the three compounds became evident in all sampled sites, with concentrations of up to 10.66 μg / L, 7.24 μg / L and 2.64 μg / L for Cbz, Mp and Sil, respectively. In planted wetlands, removal efficiencies of up to 97% were achieved for Sil, while in the unplanted these were 30% lower. Removal efficiencies greater than 97% were achieved for Mp, however, for Cbz they were less than 10%, evaluated in both treatments. The average removal efficiency for organic load was 95%. It was determined that constructed wetlands can efficiently remove simple molecular structure compounds such as Mp, and complex structures such as Sil. However, Cbz remained as a recalcitrant contaminant.