Biogenic synthesis of reduced graphene oxide from Ziziphus spina-christi (Christ's thorn jujube) extracts for catalytic, antimicrobial, and antioxidant potentialities

Exploring the antioxidant activity and cytotoxicity of the reduced graphene oxide-based nanocomposite

In the current study, the radical scavenging activity and cytotoxicity of reduced graphene oxide (rGO), mediated by titanium dioxide (TiO2) nanocomposite, have been explored. The sol-gel method was utilized to synthesize TiO2 nanoparticles without surfactants, and the improved Hummer's method for the graphene oxide (GO) was followed by the thermal reduction method to obtain rGO. The single-step hydrothermal process was utilized for the synthesis of GO@TiO2 and rGO@TiO2 nanocomposites. Fourier transform infrared spectrum, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HR-TEM), and Raman spectrum of the nanocomposites were investigated. XRD and Raman spectra confirm the anatase phase TiO2 formation on the 2D layer of the rGO nanosheet. FESEM and HR-TEM confirmed the spherical TiO2 with a 6.75 ± 1.42 nm diameter decorated on a 2D rGO nanosheet. The rGO@TiO2 (91.18%) exhibited higher antioxidant properties than the GO@TiO2 (70.00%) nanocomposite at 400 µg/mL concentration, evaluated by the DPPH method. Moreover, the nanocomposite exhibits stronger scavenger activity towards the hole scavenger than the electron scavenger. The rGO@TiO2 nanocomposite showed less cytotoxicity towards L929 cells compared to TiO2 nanoparticles, GO, rGO, and GO@TiO2. The antibacterial properties of the rGO against Staphylococcus aureus bacteria were enhanced by adding TiO2 nanoparticles. Thus, the results support the potential antioxidant properties of rGO-based nanocomposites that can be explored for biomedical and environmental applications.

Recent trends in transforming different waste materials into graphene via Flash Joule Heating

The conversion of waste materials into graphene using the Flash Joule Heating (FJH) method presents an eco-friendly and sustainable approach to addressing the global issue of environmental pollution. FJH efficiently transforms carbon-based materials, such as plastics, batteries, and food wastes, into high-quality graphene by applying a high-voltage electrical current that generates temperatures exceeding 3000 °C within milliseconds to seconds. This technique not only offers a rapid and energy-efficient pathway for graphene synthesis but also tackles the environmental drawbacks of traditional waste disposal methods. Compared to conventional graphene production techniques, which depend on using harsh chemicals or extreme conditions and tend to be energy-intensive and costly, FJH is scalable, fast, cost-efficient as it costs 130-135 US dollars per ton using coal as a carbon source, capable of handling a wide range of waste materials without requiring solvents or catalysts, and only produces about 10 kg of carbon dioxide (CO2) compared to 400-500 kg released from conventional synthesis for each kg of graphene. Flash graphene (FG) shows promise in various applications, including concrete production, water purification, and supercapacitors, making it a crucial contributor to the development of sustainable technologies. This article delves into the basics of FJH, the automation, and the scaling up of the process over the last four years with an aspiration to produce 100 tons of graphene per day. Various characterization techniques of FG, the advantages of FG compared to conventional graphene, and the challenges and limitations of FJH are discussed.

Biosynthesis of trimetallic nanoparticles and their biological applications: a recent review

Trimetallic nanoparticles (TMNPs) have emerged as a pivotal area of research due to their unique properties and diverse applications across medicine, agriculture, and environmental sciences. This review provides several novel contributions that distinguish it from existing literature on trimetallic nanoparticles (TMNPs). Firstly, it offers a focused exploration of TMNPs, specifically addressing their unique properties and applications, which have been less examined compared to other multimetallic nanoparticles. This targeted analysis fills a significant gap in current research. Secondly, the review emphasizes innovative biosynthesis methods utilizing microorganisms and plant extracts, positioning these green synthesis approaches as environmentally friendly alternatives to traditional chemical methods. This focus aligns with the increasing demand for sustainable practices in nanotechnology. Furthermore, the review integrates discussions on both medical and agricultural applications of TMNPs, highlighting their multifunctional potential across diverse fields. This comprehensive perspective enhances our understanding of how TMNPs can address various challenges. Additionally, the review explores the synergistic effects among the different metals in TMNPs, providing insights into how these interactions can be harnessed to optimize their properties for specific applications. Such discussions are often overlooked in existing studies. Moreover, this review identifies critical research gaps and challenges within the field, outlining future directions that encourage further investigation and innovation in TMNP development. By doing so, it proactively contributes to advancing the field. Finally, the review advocates for interdisciplinary collaboration among material scientists, biologists, and environmental scientists, emphasizing the importance of diverse expertise in enhancing the research and application of TMNPs.

Elbay A, El-Maghrabi N, Fawzy M. From Waste to Worth: Upcycling Plastic into High-Value Carbon-Based Nanomaterials

Plastic waste (PW) presents a significant environmental challenge due to its persistent accumulation and harmful effects on ecosystems. According to the United Nations Environment Program (UNEP), global plastic production in 2024 is estimated to reach approximately 500 million tons. Without effective intervention, most of this plastic is expected to become waste, potentially resulting in billions of tons of accumulated PW by 2060. This study explores innovative approaches to convert PW into high-value carbon nanomaterials (CNMs) such as graphene, carbon nanotubes (CNTs), and other advanced carbon structures. Various methods including pyrolysis, arc discharge, catalytic degradation, and laser ablation have been investigated in transforming PW into CNMs. However, four primary methodologies are discussed herein: thermal decomposition, chemical vapor deposition (CVD), flash joule heating (FJH), and stepwise conversion. The scalability of the pathways discussed for industrial applications varies significantly. Thermal decomposition, particularly pyrolysis, is highly scalable due to its straightforward setup and cost-effective operation, making it suitable for large-scale waste processing plants. It also produces fuel byproducts that can be used as an alternative energy source, promoting the concept of energy recovery and circular economy. CVD, while producing high-quality carbon materials, is less scalable due to the high cost and required complex equipment, catalyst, high temperature, and pressure, which limits its use to specialized applications. FJH offers rapid synthesis of high-quality graphene using an economically viable technique that can also generate valuable products such as green hydrogen, carbon oligomers, and light hydrocarbons. However, it still requires optimization for industrial throughput. Stepwise conversion, involving multiple stages, can be challenging to scale due to higher operational complexity and cost, but it offers precise control over material properties for niche applications. This research demonstrates the growing potential of upcycling PW into valuable materials that align with global sustainability goals including industry, innovation, and infrastructure (Goal 9), sustainable cities and communities (Goal 11), and responsible consumption and production (Goal 12). The findings underscore the need for enhanced recycling infrastructure and policy frameworks to support the shift toward a circular economy and mitigate the global plastic crisis.

In silico mechanistic insights of ecofriendly synthesized AgNPs, SeNPs, rGO and Ag&SeNPs@rGONM's for biological applications and its toxicity evaluation using Artemia salina

The present study focused on Rosmarinus officinalis Linn. leaves extract (ROE) mediated synthesis of silver nanoparticles (AgNPs), selenium nanoparticles (SeNPs), reduced graphene oxide (rGO) and silver and selenium nanoparticles decorated on rGO nanomaterials (Ag&SeNPs@rGONM's) for its antibacterial and antifungal in silico mechanistic insight applications. In addition, the toxicity of the synthesized nanomaterials was evaluated using Artemia salina. The formation of AgNPs, SeNPs, rGO and Ag&SeNPs@rGONM's was completed within 1.0, 140, 120 and 144 h, respectively. Various optical and microscopic examinations were evident in the nanomaterial's synthesis. Further, the average size and stability of the synthesized nanomaterials were conformed through dynamic light scattering (DLS) and zeta potential analyzer, respectively. The synthesized Ag&SeNPs@rGONM's were pronounced promising results against Gram-negative bacteria of Escherichia coli and the results achieved from the route of entry and action, reactive oxygen species (ROS), and antioxidant nature of nanoparticles were evidence of its properties. Computational studies further supported these findings, indicating much of the phytochemicals present in ROE well interact with the bacterial surface proteins. Similarly, the synthesized Ag&SeNPs@rGONM's was effective against Fusarium graminearum and Alternaria alternata in a dose dependent manner than its original nanomaterials. In addition, the docking study also confirmed that rosmarinic acid and caffeic acid prominently interacted with the fungal proteins. Interestingly, Ag&SeNPs@rGONM's pronounced less toxic effect compared to AgNPs and SeNPs against Artemia salina, which shows its biocompatibility.

Biogenic Zinc Oxide Nanoparticles as a Promising Antibacterial Agent: Synthesis and Characterization

Nanotechnology has gained popularity in recent years due to its wide-ranging applications within the scientific community. The three main methods for synthesizing nanoparticles are physical, chemical, and biological. However, the adverse effects associated with physical and chemical methods have led to a growing interest in biological methods. Interestingly, green synthesis using plants has gained prominence in developing new treatments for bacterial infections. Zinc oxide nanoparticles (ZnO NPs) produced using environmentally friendly methods are more biocompatible and have potential applications as antibacterial agents in the biomedical field. As a result, this review discusses the green synthesis of ZnO NPs, factors influencing optimal synthesis, characterization techniques, and the antibacterial activity of some plant-mediated ZnO NPs. It also provides a comprehensive and analytical exploration of ZnO NP biosynthesis, the role of phytochemical compounds as reducing and stabilizing agents, the mechanism of action of their antibacterial properties and further highlights the challenges and prospects in this innovative research area.

Green synthesis of trimetallic CuO/Ag/ZnO nanocomposite using Ziziphus spina-christi plant extract: characterization, statistically experimental designs, and antimicrobial assessment

In this study, Ziziphus spina christi leaves was used to synthesize a trimetallic CuO/Ag/ZnO nanocomposite by a simple and green method. Many characterizations e.g. FTIR, UV-vis DRS, SEM-EDX, TEM, XRD, zeta-size analysis, and DLS, were used to confirm green-synthesized trimetallic CuO/Ag/ZnO nanocomposite. The green, synthesized trimetallic CuO/Ag/ZnO nanocomposite exhibited a spherical dot-like structure, with an average particle size of around 7.11 ± 0.67 nm and a zeta potential of 21.5 mV. An extremely homogeneous distribution of signals, including O (79.25%), Cu (13.78%), Zn (4.42%), and Ag (2.55%), is evident on the surface of green-synthetic nanocomposite, according to EDX data. To the best of our knowledge, this is the first study to effectively use an industrially produced green trimetallic CuO/Ag/ZnO nanocomposite as a potent antimicrobial agent by employing different statistically experimental designs. The highest yield of green synthetic trimetallic CuO/Ag/ZnO nanocomposite was (1.65 mg/mL), which was enhanced by 1.85 and 5.7 times; respectively, by using the Taguchi approach in comparison to the Plackett-Burman strategy and basal condition. A variety of assays techniques were utilized to evaluate the antimicrobial capabilities of the green-synthesized trimetallic CuO/Ag/ZnO nanocomposite at a 200 µg/mL concentration against multidrug-resistant human pathogens. After a 36-h period, the tested 200 µg/mL of the green-synthetic trimetallic CuO/Ag/ZnO nanocomposite effectively reduced the planktonic viable counts of the studied bacteria, Escherichia coli and Staphylococcus aureus, which showed the highest percentage of biofilm reduction (98.06 ± 0.93 and 97.47 ± 0.65%; respectively).

Sustainable fabrication of dimorphic plant derived ZnO nanoparticles and exploration of their biomedical and environmental potentialities

Although, different plant species were utilized for the fabrication of polymorphic, hexagonal, spherical, and nanoflower ZnO NPs with various diameters, few studies succeeded in synthesizing small diameter ZnO nanorods from plant extract at ambient temperature. This work sought to pioneer the ZnO NPs fabrication from the aqueous extract of a Mediterranean salt marsh plant species Limoniastrum monopetalum (L.) Boiss. and assess the role of temperature in the fabrication process. Various techniques have been used to evaluate the quality and physicochemical characteristics of ZnO NPs. Ultraviolet-visible spectroscopy (UV-VIS) was used as the primary test for formation confirmation. TEM analysis confirmed the formation of two different shapes of ZnO NPs, nano-rods and near hexagonal NPs at varying reaction temperatures. The nano-rods were about 25.3 and 297.9 nm in diameter and in length, respectively while hexagonal NPs were about 29.3 nm. The UV-VIS absorption spectra of the two forms of ZnO NPs produced were 370 and 365 nm for nano-rods and hexagonal NPs, respectively. FT-IR analysis showed Zn-O stretching at 642 cm-1 and XRD confirmed the crystalline structure of the produced ZnO NPs. Thermogravimetric analysis; TGA was also used to confirm the thermal stability of ZnO NPs. The anti-tumor activities of the two prepared ZnO NPs forms were investigated by the MTT assay, which revealed an effective dose-dependent cytotoxic effect on A-431 cell lines. Both forms displayed considerable antioxidant potential, particularly the rod-shaped ZnO NPs, with an IC50 of 148.43 µg mL-1. The rod-shaped ZnO NPs were superior candidates for destroying skin cancer, with IC50 of 93.88 ± 1 µg mL-1 ZnO NPs. Thus, rod-shaped ZnO NPs are promising, highly biocompatible candidate for biological and biomedical applications. Furthermore, both shapes of phyto-synthesized NPs demonstrated effective antimicrobial activity against various pathogens. The outcomes highlight the potential of phyto-synthesized ZnO NPs as an eco-friendly alternative for water and wastewater disinfection.

Ultrasound-driven facile fabrication of Pd doped SnO2 hierarchical superstructures: Structural, growth mechanism, dermatoglyphics, and anti-cancer activity

This research introduces a novel method that leverages Spirulina extract (S.E) as a bio-surfactant in the ultrasound-assisted synthesis (UAS) of Pd3+ (0.25-10 mol%) doped tin oxide (SnO2) self-assembled superstructures. Nanotechnology has witnessed significant advancements in recent years, driven by the exploration of novel synthesis methods and the development of advanced nanomaterials tailored for specific applications. Metal oxide nanoparticles, particularly SnO2, have garnered considerable attention due to their versatile properties and potential applications in various fields, including gas sensing, catalysis, and biomedical engineering. The study explores how varying influential parameters like S.E concentration, sonication time, pH, and sonication power can influence the resulting superstructures' morphology, size, and shape. A theoretical model for forming different hierarchical superstructures (HS) is proposed. X-ray diffraction (XRD) analysis confirms the crystalline tetragonal rutile phase of the SnO2:Pd HS. Raman spectroscopy reveals a red shift in the A1g mode, indicating phonon confinement due to various defects in the SnO2 structure. Further characterization using transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) provides insights into particle size, surface morphology, elemental composition, and binding energy. The study also demonstrates the application of optimized SnO2:3Pd HS in developing latent fingerprints (LFPs) on different surfaces using a simple powder dusting (PD) method, with the fingerprints (FPs) visualized under normal light. A mathematical model developed in Python-based software is used to analyze various features of the developed FPs, including pore properties such as number, position, inter-spacing, area, and shape. Additionally, an in vitro MTT assay shows concentration-dependent anticancer activity of SnO2:3Pd nanoparticles (NPs) on MCF7 cell lines, highlighting their potential as a promising cancer treatment option. Overall, the study suggests that the optimized HS can serve as multifunctional platforms for biomedical and dermatoglyphics applications, demonstrating the versatility and potential of the synthesized materials.

Potentials of mono- and multi-metal ion removal from water with cotton stalks and date palm stone residuals

In this work, cotton stalks (Gossypium barbadense) and date palm stones (Phoenix dactylifera) have been used as biosorbents to remove cadmium; Cd(II), lead; Pb(II), and zinc; Zn(II) from mono- and multi-solutions. Each biosorbent was characterized using SEM-EDX, and FT-IR. The findings showed that pH, dose, contact time, metal concentration, and particle size affect the treatment process. The adsorption pattern was Pb(II) > Cd(II) > Zn(II) for both biosorbents. The adsorption performance of cotton stalks was higher than that of date palm stones. The fitted maximum uptake capacities; qm of cotton stalks were higher than those of date palm stones. The maximum adsorption at optimum conditions of Pb(II), Cd(II), and Zn(II) with cotton stalks were 98%, 92.1%, and 78.9%, respectively, within 30 min. While the maximum adsorption of Pb(II), Cd(II), and Zn(II) with date palm stones were 94.6%, 76%, and 68.6%, respectively. Results confirmed the antagonistic effect of heavy metal removal at optimum conditions. Biosorbents could remove ~ 100% of the metal ions from real wastewater samples. Regeneration investigation revealed a successful reusability of both biosorbents for four cycles.

Efficient photocatalytic bactericidal performance of green-synthesised TiO2/reduced graphene oxide using banana peel extracts

In this study, the fabrication of titanium dioxide/reduced graphene oxide (TiO2/rGO) utilising banana peel extracts (Musa paradisiaca L.) as a reducing agent for the photoinactivation of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) was explored. The GO synthesis was conducted using a modified Tour method, whereas the production of rGO involved banana peel extracts through a reflux method. The integration of TiO2 into rGO was achieved via a hydrothermal process. The successful synthesis of TiO2/rGO was verified through various analytical techniques, including X-ray diffraction (XRD), gas sorption analysis (GSA), Fourier-transform infrared (FT-IR) spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS), scanning electron microscope-energy dispersive X-ray (SEM-EDX) and transmission electron microscopy (TEM) analyses. The results indicated that the hydrothermal-assisted green synthesis effectively produced TiO2/rGO with a particle size of 60.5 nm. Compared with pure TiO2, TiO2/rGO demonstrated a reduced crystallite size (88.505 nm) and an enhanced surface area (22.664 m2/g). Moreover, TiO2/rGO featured a low direct bandgap energy (3.052 eV), leading to elevated electrical conductivity and superior photoconductivity. To evaluate the biological efficacy of TiO2/rGO, photoinactivation experiments targeting E. coli and S. aureus were conducted using the disc method. Sunlight irradiation emerged as the most effective catalyst, achieving optimal inactivation results within 6 and 4 h.

Green Coffee Bean Extract Assisted Facile Synthesis of Reduced Graphene Oxide and Its Dye Removal Activity

To discharge the colored effluents from industries there needs to be effective and affordable treatment options. Adsorption using reduced graphene oxide (rGO) as an adsorbent is a prominent one. In this study, green coffee bean extract (GCBE) is utilized as a safe reducing agent for the reduction of graphene oxide (GO) to synthesize rGO. The formation of rGO is confirmed by a new peak in the UV-vis spectra at 275 nm and a diffraction peak in the XRD patterns at 22°. The effective formation of rGO is further substantiated by a change in the GO peak's properties in the FTIR, EDX, and Raman spectra and a weight loss change in TGA. The SEM and TEM analyses demonstrate the effective production of the nano-sheets of rGO having exfoliated and segregated in a few layers. Furthermore, the obtained rGO exhibited outstanding efficacy in wastewater cleanup, effectively adsorbing MB as a prototype organic dye. The kinetics and isotherm study suggested that the adsorption leads by the chemisorption and monolayer formation on the homogeneous surface of rGO. The maximum adsorption capacity is found to be 89.3 mg g-1. This process offers a fresh opportunity for the economical and safe production of rGO for wastewater treatment.

A Comprehensive Review on Adsorption, Photocatalytic and Chemical Degradation of Dyes and Nitro-Compounds over Different Kinds of Porous and Composite Materials

Dye and nitro-compound pollution has become a significant issue worldwide. The adsorption and degradation of dyes and nitro-compounds have recently become important areas of study. Different methods, such as precipitation, flocculation, ultra-filtration, ion exchange, coagulation, and electro-catalytic degradation have been adopted for the adsorption and degradation of these organic pollutants. Apart from these methods, adsorption, photocatalytic degradation, and chemical degradation are considered the most economical and efficient to control water pollution from dyes and nitro-compounds. In this review, different kinds of dyes and nitro-compounds, and their adverse effects on aquatic organisms and human beings, were summarized in depth. This review article covers the comprehensive analysis of the adsorption of dyes over different materials (porous polymer, carbon-based materials, clay-based materials, layer double hydroxides, metal-organic frameworks, and biosorbents). The mechanism and kinetics of dye adsorption were the central parts of this study. The structures of all the materials mentioned above were discussed, along with their main functional groups responsible for dye adsorption. Removal and degradation methods, such as adsorption, photocatalytic degradation, and chemical degradation of dyes and nitro-compounds were also the main aim of this review article, as well as the materials used for such degradation. The mechanisms of photocatalytic and chemical degradation were also explained comprehensively. Different factors responsible for adsorption, photocatalytic degradation, and chemical degradation were also highlighted. Advantages and disadvantages, as well as economic cost, were also discussed briefly. This review will be beneficial for the reader as it covers all aspects of dye adsorption and the degradation of dyes and nitro-compounds. Future aspects and shortcomings were also part of this review article. There are several review articles on all these topics, but such a comprehensive study has not been performed so far in the literature.

Efficient Removal of Phosphate from Wastewater by a Novel Phyto-Graphene Composite Derived from Palm Byproducts

The increased demand for clean water especially in overpopulated countries is of great concern; thus, the development of eco-friendly and cost-effective techniques and materials that can remediate polluted water for possible reuse in agricultural purposes can offer a life-saving solution to improve human welfare, especially in view of climate change impacts. In the current study, the agricultural byproducts of palm trees have been used for the first time as a carbon source to produce graphene functionalized with ferrocene in a composite form to enhance its water treatment potential. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy, X-ray diffraction (XRD), ultraviolet-visible, Fourier transform infrared spectroscopy, zeta potential, thermogravimetric analysis, and Raman techniques have been used to characterize the produced materials. SEM investigations confirmed the formation of multiple sheets of the graphene composite. Data collected from the zeta potential revealed that graphene was supported with a negative surface charge that maintains its stability while XRD elucidated that graphene characteristic peaks were evident at 2θ = 22.4 and 22.08° using palm leaves and fibers, respectively. Batch adsorption experiments were conducted to find out the most suitable conditions to remove PO₄ ^3- from wastewater by applying different parameters, including pH, adsorbent dose, initial concentration, and time. Their effect on the adsorption process was also investigated. Results demonstrated that the best adsorption capacity was 58.93 mg/g (removal percentage: 78.57%) using graphene derived from palm fibers at 15 mg L^-1 initial concentration, pH = 3, dose = 10 mg, and 60 min contact time. Both linear and non-linear forms of kinetic and isotherm models were investigated. The adsorption process obeyed the pseudo-second-order kinetic model and was well fitted to the Langmuir isotherm.

Synergetic effect of green synthesized reduced graphene oxide and nano-zero valent iron composite for the removal of doxycycline antibiotic from water

In this work, the synthesis of an rGO/nZVI composite was achieved for the first time using a simple and green procedure via Atriplex halimus leaves extract as a reducing and stabilizing agent to uphold the green chemistry principles such as less hazardous chemical synthesis. Several tools have been used to confirm the successful synthesis of the composite such as SEM, EDX, XPS, XRD, FTIR, and zeta potential which indicated the successful fabrication of the composite. The novel composite was compared with pristine nZVI for the removal aptitude of a doxycycline antibiotic with different initial concentrations to study the synergistic effect between rGO and nZVI. The adsorptive removal of bare nZVI was 90% using the removal conditions of 25 mg L-1, 25 °C, and 0.05 g, whereas the adsorptive removal of doxycycline by the rGO/nZVI composite reached 94.6% confirming the synergistic effect between nZVI and rGO. The adsorption process followed the pseudo-second order and was well-fitted to Freundlich models with a maximum adsorption capacity of 31.61 mg g-1 at 25 °C and pH 7. A plausible mechanism for the removal of DC was suggested. Besides, the reusability of the rGO/nZVI composite was confirmed by having an efficacy of 60% after six successive cycles of regeneration.