Growth of Cyanobacteria: Optimization for Increased Carbohydrate Content

Semi-continuous cultivation of EPS-producing marine cyanobacteria: A green biotechnology to remove dissolved metals obtaining metal-organic materials

Given the necessity for bioprocesses scaling-up, the present study aims to explore the potential of three marine cyanobacteria and a consortium, cultivated in semi-continuous mode, as a green approach for i) continuous exopolysaccharide-rich biomass production and ii) removal of positively charged metals (Cu, Ni, Zn) from mono and multi-metallic solutions. To ensure the effectiveness of both cellular and released exopolysaccharides, weekly harvested whole cultures were confined in dialysis tubings. The results revealed that all the tested cyanobacteria have a stronger affinity towards Cu in mono and three-metal systems. Despite the amount of metals removed per gram of biomass decreased with higher biosorbent dosage, the more soluble carbohydrates were produced, the greater was the metal uptake, underscoring the pivotal role of released exopolysaccharides in metal biosorption. According to this, Dactylococcopsis salina 16Som2 showed the highest carbohydrate productivity (142 mg L-1 d-1) and metal uptake (84 mg Cu g-1 biomass) representing a promising candidate for further studies. The semi-continuous cultivation of marine cyanobacteria here reported assures a schedulable production of exopolysaccharide-rich biosorbents with high metal removal and recovery potential, even from multi-metallic solutions, as a step forward in the industrial application of cyanobacteria.

Cyanobacterial Biocrust on Biomineralized Soil Mitigates Freeze-Thaw Effects and Preserves Structure and Ecological Functions

Biocrust inoculation and microbially induced carbonate precipitation (MICP) are tools used in restoring degraded arid lands. It remains unclear whether the ecological functions of the two tools persist when these methods are combined and subjected to freeze-thaw (FT) cycles. We hypothesized a synergetic interaction between MICP treatment and biocrust under FT cycles, which would allow both components to retain their ecological functions. We grew cyanobacterial (Nostoc commune) biocrusts on bare soil and on MICP (Sporosarcina pasteurii)-treated soil, subjecting them to repeated FT cycles simulating the Mongolian climate. Generalized linear modeling revealed that FT cycling did not affect physical structure or related functions but could increase the productivity and reduce the nutrient condition of the crust. The results confirm the high tolerance of MICP-treated soil and biocrust to FT cycling. MICP treatment + biocrust maintained higher total carbohydrate content under FT stress. Our study indicates that biocrust on biomineralized soil has a robust enough structure to endure FT cycling during spring and autumn and to promote restoration of degraded lands.

Enhanced production of recombinant proteins in Corynebacterium glutamicum using a molecular chaperone

Protein synthesis in Corynebacterium glutamicum is critical for applications in biotechnology and medicine. However, the use of C. glutamicum for protein production is limited by its low expression and aggregation. To overcome these limitations, a molecular chaperone plasmid system was developed in this study to improve the efficiency of recombinant protein synthesis in C. glutamicum. The effect of molecular chaperones on target protein synthesis (Single-chain variable fragment, Scfv) under three different promoter strengths was tested. In addition, the plasmid containing the molecular chaperone and target protein was verified for growth stability and plasmid stability. This expression model was further validated using two recombinant proteins, human interferon-beta (Hifn) and hirudin variant III (Rhv3). Finally, the Rhv3 protein was purified, and analysis of Rhv3 activity confirmed that the use of a molecular chaperone led to an improvement in test protein synthesis. Thus, the use of molecular chaperones is believed to will improve recombinant proteins synthesis in C. glutamicum.

Enhanced polyglucan contents in divergent cyanobacteria under nutrient-deprived photoautotrophy: transcriptional and metabolic changes in response to increased glycogen accumulation in nitrogen-deprived Synechocystis sp. PCC 6803

Cyanobacteria accumulate polyglucan as main carbohydrate storage. Here, the cellular polyglucan content was determined in 27 cyanobacterial strains from 25 genera. The polyglucan contents were significantly enhanced in 20 and 23 strains under nitrogen (-N) and phosphate (-P) deprivation, respectively. High polyglucan accumulation was not associated with particular evolutionary groups but was strain specific. The highest polyglucan accumulations of 46.2% and 52.5% (w/w dry weight; DW) were obtained under -N in Synechocystis sp. PCC 6803 (hereafter Synechocystis) and Chroococcus limneticus, respectively. In Synechocystis, 80-97% (w/w) of the polyglucan was glycogen. Transcriptome and metabolome analyses during glycogen accumulation under -N were determined in Synechocystis. The genes responsible for the supply of the substrates for glycogen synthesis: glycerate-1,3-phosphate and fructose-1,6-phosphate, were significantly up-regulated. The genes encoding the enzymes converting succinate to malate in TCA cycle, were significantly down-regulated. The genes encoding the regulator proteins which inhibits metabolism at lower part of glycolysis pathway, were also significantly up-regulated. The transcript levels of PII protein and the level of 2-oxoglutarate, which form a complex that inhibits lower part of glycolysis pathway, were significantly increased. Thus, the increased Synechocystis glycogen accumulation under -N was likely to be mediated by the increased supply of glycogen synthesis substrates and metabolic inhibitions at lower part of glycolysis pathway and TCA cycle.

Microalgal Biomass as Feedstock for Bacterial Production of PHA: Advances and Future Prospects

The search for biodegradable plastics has become the focus in combating the global plastic pollution crisis. Polyhydroxyalkanoates (PHAs) are renewable substitutes to petroleum-based plastics with the ability to completely mineralize in soil, compost, and marine environments. The preferred choice of PHA synthesis is from bacteria or archaea. However, microbial production of PHAs faces a major drawback due to high production costs attributed to the high price of organic substrates as compared to synthetic plastics. As such, microalgal biomass presents a low-cost solution as feedstock for PHA synthesis. Photoautotrophic microalgae are ubiquitous in our ecosystem and thrive from utilizing easily accessible light, carbon dioxide and inorganic nutrients. Biomass production from microalgae offers advantages that include high yields, effective carbon dioxide capture, efficient treatment of effluents and the usage of infertile land. Nevertheless, the success of large-scale PHA synthesis using microalgal biomass faces constraints that encompass the entire flow of the microalgal biomass production, i.e., from molecular aspects of the microalgae to cultivation conditions to harvesting and drying microalgal biomass along with the conversion of the biomass into PHA. This review discusses approaches such as optimization of growth conditions, improvement of the microalgal biomass manufacturing technologies as well as the genetic engineering of both microalgae and PHA-producing bacteria with the purpose of refining PHA production from microalgal biomass.

Co-fermentation of residual algal biomass and glucose under the influence of Fe3O4 nanoparticles to enhance biohydrogen production under dark mode

The present study reports Fe₃O₄ nanoparticles (Fe₃O₄ NPs) induced enhanced hydrogen production via co-fermentation of glucose and residual algal biomass (cyanobacteria Lyngbya limnetica). A significant enhancement of dark fermentative H₂ production has been noticed under the influence of co-fermentation of glucose and residual algal biomass using Fe₃O₄ NPs as catalyst. Further, using the optimized ratio of glucose to residual algal biomass (10:4), ∼ 37.14 % higher cumulative H₂ has been recorded in presence of 7.5 mg/L Fe₃O₄ NPs as compared to control at 37 °C. In addition, under the optimum conditions [glucose to residual algal biomass ratio (10:4)] presence of 7.5 mg/L Fe₃O₄ NPs produces ∼ 937 mL/L cumulative H₂ in 168 h at pH 7.5 and at temperature 40 °C. Clostridum butyrium, employed for the dark fermentation yielded ∼ 7.7 g/L dry biomass in 168 h whereas acetate (9.0 g/L) and butyrate (6.2 g/L) have been recorded as the dominating metabolites.

Environmental Regulation of PndbA600, an Auto-Inducible Promoter for Two-Stage Industrial Biotechnology in Cyanobacteria

Cyanobacteria are photosynthetic prokaryotes being developed as sustainable platforms that use renewable resources (light, water, and air) for diverse applications in energy, food, environment, and medicine. Despite the attractive promise that cyanobacteria offer to industrial biotechnology, slow growth rates pose a major challenge in processes which typically require large amounts of biomass and are often toxic to the cells. Two-stage cultivation strategies are an attractive solution to prevent any undesired growth inhibition by de-coupling biomass accumulation (stage I) and the industrial process (stage II). In cyanobacteria, two-stage strategies involve costly transfer methods between stages I and II, and little work has been focussed on using the distinct growth and stationary phases of batch cultures to autoregulate stage transition. In the present study, we identified and characterised a growth phase-specific promoter, which can serve as an auto-inducible switch to regulate two-stage bioprocesses in cyanobacteria. First, growth phase-specific genes were identified from a new RNAseq dataset comparing two growth phases and six nutrient conditions in Synechocystis sp. PCC 6803, including two new transcriptomes for low Mg and low K. A type II NADH dehydrogenase (ndbA) showed robust induction when the cultures transitioned from exponential to stationary phase growth. Behaviour of a 600-bp promoter sequence (PndbA600) was then characterised in detail following the expression of PndbA600:GFP in Synechococcus sp. PCC 7002. Culture density and growth media analyses showed that PndbA600 activation was not dependent on increases in culture density per se but on N availability and on another activating factor present in the spent media of stationary phase cultures (Factor X). PndbA600 deactivation was dependent on the changes in culture density and in either N availability or Factor X. Electron transport inhibition studies revealed a photosynthesis-specific enhancement of active PndbA600 levels. Our findings are summarised in a model describing the environmental regulation of PndbA600, which can now inform the rational design of two-stage industrial processes in cyanobacteria.

Recent Advances in Developing Artificial Autotrophic Microorganism for Reinforcing CO2 Fixation

With the goal of achieving carbon sequestration, emission reduction and cleaner production, biological methods have been employed to convert carbon dioxide (CO₂) into fuels and chemicals. However, natural autotrophic organisms are not suitable cell factories due to their poor carbon fixation efficiency and poor growth rate. Heterotrophic microorganisms are promising candidates, since they have been proven to be efficient biofuel and chemical production chassis. This review first briefly summarizes six naturally occurring CO₂ fixation pathways, and then focuses on recent advances in artificially designing efficient CO₂ fixation pathways. Moreover, this review discusses the transformation of heterotrophic microorganisms into hemiautotrophic microorganisms and delves further into fully autotrophic microorganisms (artificial autotrophy) by use of synthetic biological tools and strategies. Rapid developments in artificial autotrophy have laid a solid foundation for the development of efficient carbon fixation cell factories. Finally, this review highlights future directions toward large-scale applications. Artificial autotrophic microbial cell factories need further improvements in terms of CO₂ fixation pathways, reducing power supply, compartmentalization and host selection.

Natural Communities of Microalgae and Cyanobacteria from Eutrophicated Waters as Potential Co-substrates for Small-scale Biogas Production

The purpose of this study was to determine the biogas potential of biomass produced by microbiotic communities developed under natural conditions in freshwater systems such as ponds incorporated into agricultural landscapes. Natural communities of microalgae were collected from a small eutrophicated pond where dominant species were euglenoids (Lepocinclis species). Cyanobacterial communities dominated by Lyngbya species were taken from a domestic aquarium and cultivated under makeshift conditions. Experiments were done using dairy cow manure (DCM) for codigestion with natural communities of microalgae (MDM) and cyanobacteria (CDM) and conducted during 42 days in thermophilic regime. The total biogas yields were 421.40 and 383.34 mL/g volatile solids (VS), while the average methane contents were 63.97 and 64.06% for MDM and CDM, respectively. Our results indicate that the natural communities of microalgae and cyanobacteria used in this study possess the potential for biogas production, which is, in comparison with particular algal and cyanobacterial strains cultivated under strictly controlled cultivation conditions, more promising. Therefore, this study aims to motivate further investigations into the diverse natural communities of microalgae and cyanobacteria and pretreatments that are environmentally friendly and cost-effective and will eventually enhance small-scale biogas production on agricultural farms.