Transmucosal delivery of domperidone from bilayered buccal patches: In Vitro, Ex Vivo and In Vivo characterization

Emerging trends in designing polysaccharide based mucoadhesive network hydrogels as versatile platforms for innovative delivery of therapeutic agents: A review

INTRODUCTION

The rapid progress in polymer science has designed innovative materials for biomedical applications. In the case of drug design, for each new therapeutic agent, a drug delivery system (DDS) is required to improve its pharmacokinetic and pharmacodynamic parameters. Therefore, significant research has been carried out to develop drug delivery (DD) carriers for these new therapeutic agents. Hydrogels have been explored as potential candidates to prepare controlled drug delivery (CDD) systems to address the challenges related to the performance of the conventional DD formulations. Mucoadhesive drug delivery system (MUCO-DDS) is a specialized form of CDD system, facilitating site-specific DD, protecting the drug from first pass metabolism and enhancing its overall bioavailability.

METHODS

The present article provides a comprehensive discussion of the synthesis, properties and applications of polysaccharide-derived MUCO-DDS. Different natural polymer-derived MUCO-DDS including chitosan, alginate, pectin, xanthan gum, psyllium, gelatin, cellulose, hyaluronic acid, guar gum, sterculia gum and tragacanth gum have been reported. Herein, these DDS were elaborately discussed along with their applications and future-prospective. These DDS are classified on the basis of drug administration (nasal, ocular, vagina/rectal & buccal DDS) and drug distribution (reservoir and monolithic polymer matrix). Factors contributing to modifications of properties of MUCO-DDS were also demonstrated along with different stages and theories of mucoadhesion.

RESULTS

Polysaccharides exhibit properties such as biocompatibility, biodegradability, and flexibility, making them ideal for CDD applications. MUCO-DDS demonstrates several significant advantages. Moreover, the article bridges theoretical insights with practical applications and future research prospects, ensuring its relevance for advancements in the concerned field. This review serves as a comprehensive resource, addressing gaps in previous literature and paving the way for innovations in MUCO-DDS, through a comparative analysis of the advantages, limitations, and modifications of natural polymers.

CONCLUSIONS

In conclusion, this review gives an overview of the current developments in the field of mucoadhesive DD systems and also gives insights into the future perspectives. The MUCOAD of DDS could be modulated by the inclusion of various natural and synthetic components in hydrogels. Future directions for the researchers are underway to integrate nanotechnology with mucoadhesive systems to create hybrid platforms. Overall, by addressing current limitations and leveraging emerging technologies, these systems can revolutionize drug delivery for a wide range of therapeutic applications.

Development of a Multilayer Film Including the Soluble Eggshell Membrane Fraction for the Treatment of Oral Mucosa Lesions

BACKGROUND/OBJECTIVES

Oral diseases causing mucosal lesions are normally treated with local or systemic anti-inflammatory, analgesic and antimicrobial agents. The development of topical formulations, including wound-healing promoters, might speed up the recovery process, improving patients' quality of life, and reduce the risk of deterioration in health conditions. In this study, a mucoadhesive multilayer film, including a novel biocompatible substance (solubilized eggshell membrane, SESM), was rationally designed.

METHODS

The SESM preparation procedure was optimized and its biological effects on cell proliferation and inflammation marker gene expression were evaluated in vitro; preformulation studies were conducted to identify the most promising polymers with film-forming properties; then, trilayer films, consisting of an outer layer including chlorhexidine digluconate as a model drug, a supporting layer and a mucoadhesive layer, incorporating SESM, were prepared using the casting method and their mechanical, adhesion and drug release control properties were evaluated.

RESULTS

SESM proved to possess a notable wound-healing capacity, inducing a wound closure of 84% in 24 h without inhibiting blood clotting. The films revealed a maximum detachment force from porcine mucosa of approx. 1.7 kPa and maximum in vivo residence time of approx. 200-240 min; finally, they released up to 98% of the loaded drug within 4 h.

CONCLUSIONS

The formulated trilayer films were found to possess adequate properties, making them potentially suitable for protecting oral lesions and favoring their rapid healing, while releasing antimicrobial substances that might be beneficial in reducing the risk of bacterial infections.

Functionalization of sterculia gum for making platform hydrogels via network formation for use in drug delivery

Recently, various advancements have been made in the development of functional polymeric materials for innovative applications. Herein this work, functionalization of sterculia gum (SG) was carried out via grafting of poly(2-(methacryloyloxy) ethyltrimethylammonium chloride) (METAC)-polyvinyl pyrrolidone (PVP) to develop hydrogel dressings as a platform for use in drug delivery (DD). The innovation of the present work is the exploration of inherent antioxidant and antimicrobial properties of the SG along with antimicrobial characteristic of poly(METAC) and PVP, to design the doxycycline encapsulated hydrogel dressings for better wound healing. FESEM, EDS and AFM analyzed the surface morphology of hydrogels. FTIR, 13C NMR and XRD inferred inclusion of poly(METAC)-PVP into polymers. 13C NMR confirmed the incorporation of poly(METAC) and PVP onto gum by the presence of a peak at 54.74 ppm because of methyl carbon attached to quaternary nitrogen of poly(METAC) and at 45.48 ppm due to the ring carbon of PVP along with FTIR peak at 949 cm-1 because of CN bending of quaternary nitrogen of poy (METAC). Thermal characterization of copolymers has been performed using TGA analysis. One gram of copolymeric hydrogel dressing absorbed 6.51 ± 0.03 g simulated salivary fluid (SSF) and 7.65 ± 0.03 g simulated wound fluid (SWF). Release of doxycycline drug occurred in a sustained manner and followed the Non-Fickian diffusion mechanism from hydrogels. The release profile was most effectively described by Hixon-Crowell kinetic model. Hydrogel demonstrated biocompatibility and expressed thrombogenicity 79.7 ± 4.9 % during its polymer-blood interactions. Copolymer revealed mucoadhesive property, requiring a force of 77.00 ± 0.01 mN to detach from bio-membrane. Additionally, it exhibited antioxidant features, showing 43.81 ± 0.286 % free radical scavenging. Hydrogel dressings were mechanically stable and revealed 0.76 ± 0.09 N mm-2 tensile strength and 9.18 ± 0.01 N burst strength. Polymer films were permeable to oxygen and water vapor and were impermeable to microorganisms. Hydrogel dressings exhibited antimicrobial properties against Pseudomonas aeruginosa and Staphylococcus aureus bacteria. Overall, these properties displayed the suitability of hydrogels for wound dressing (WD) applications which may actively enhance wound healing.

Polymer-Based Nanoparticles as Drug Delivery Systems for Purines of Established Importance in Medicine

Many purine derivatives are active pharmaceutical ingredients of significant importance in the therapy of autoimmune diseases, cancers, and viral infections. In many cases, their medical use is limited due to unfavorable physicochemical and pharmacokinetic properties. These problems can be overcome by the preparation of the prodrugs of purines or by combining these compounds with nanoparticles. Herein, we aim to review the scientific progress and perspectives for polymer-based nanoparticles as drug delivery systems for purines. Polymeric nanoparticles turned out to have the potential to augment antiviral and antiproliferative effects of purine derivatives by specific binding to receptors (ASGR1-liver, macrophage mannose receptor), increase in drug retention (in eye, intestines, and vagina), and permeation (intranasal to brain delivery, PEPT1 transport of acyclovir). The most significant achievements of polymer-based nanoparticles as drug delivery systems for purines were found for tenofovir disoproxil in protection against HIV, for acyclovir against HSV, for 6-mercaptopurine in prolongation of mice ALL model life, as well as for 6-thioguanine for increased efficacy of adoptively transferred T cells. Moreover, nanocarriers were able to diminish the toxic effects of acyclovir, didanosine, cladribine, tenofovir, 6-mercaptopurine, and 6-thioguanine.

Chitosan-based buccal mucoadhesive patches to enhance the systemic bioavailability of tizanidine

Tizanidine hydrochloride (TZN) is a muscle relaxant used to treat a variety of disorders such as painful muscle spasms and chronic spasticity. TZN has low oral bioavailability due to extensive first-pass metabolism and is used orally at a dose of 6-24 mg per day. In the present study, buccal patches were prepared by solvent casting method using chitosan glutamate (Chi-Glu) and novel chitosan azelate (Chi-Aze) which was synthesised in-house for the first time, to enhance the bioavailability of TZN by bypassing first-pass metabolism. The characterisation, mucoadhesion and drug release studies were performed. Chi-Aze patches retained their integrity longer in the buccal medium and showed higher ex vivo drug permeability compared to that prepared with Chi-Glu. In vivo studies revealed that buccal formulation fabricated with Chi-Aze (3%) showed approx 3 times more bioavailability than the orally administered commercial product. Results of the studies indicate that Chi-Aze, prepared by conjugation of chitosan and a fatty acid, the patch formulation is a promising buccal mucoadhesive system due to the physical stability in buccal medium, the good mucoadhesiveness and the high TZN bioavailability. Moreover, Chi-Aze patch might be an alternative to oral formulations of TZN to reduce the dose and frequency of drug administration.

Rizatriptan-Loaded Oral Fast Dissolving Films: Design and Characterizations

Rizatriptan (RZT) is an efficient anti-migraine drug which belongs to the class of selective 5 HT (1B/1D) serotonin receptor agonists. Nevertheless, RZT elicits several adverse effects and RZT nasal sprays have a limited half-life, requiring repeated doses that could cause patient noncompliance or harm to the nasopharynx and cilia. The current research aimed to develop orally disintegrating films (ODFs) of RZT employing maltodextrin (MTX) and pullulan (PUL) as film-forming polymers, as well as propylene glycol (PG) as a plasticizer. The ODFs were prepared by solvent casting method (SCM). The technique was optimized using Box-Behnken design (BBD), contemplating the ratios of PUL: MTX and different levels of PG (%) as factor variables. The influence of these factors was systematically analyzed on the selected dependent variables, including film thickness, disintegration time (D-time), folding endurance (FE), tensile strength (TS), percent elongation (%E), moisture content (%), and water uptake (%). In addition, the surface morphology, solid state analysis, drug content uniformity (%), drug release (%), and pH of the RZT-ODFs were also studied. The results demonstrated a satisfactory stable RZT-ODFs formulation that exhibited surface homogeneity and amorphous RZT in films with no discernible interactions between the model drug and polymeric materials. The optimized film showed a rapid D-time of 16 s and remarkable mechanical features. The in vitro dissolution kinetics showed that 100% RZT was released from optimized film compared to 61% RZT released from conventional RZT formulation in the initial 5 min. An animal pharmacokinetic (PK) investigation revealed that RZT-ODFs had a shorter time to achieve peak plasma concentration (T_max), a higher maximum plasma concentration (C_max), and area under the curve (AUC_0-t) than traditional oral mini capsules. These findings proposed a progressive approach for developing anti-migraine drugs that could be useful in reducing the complications of dysphagia in geriatric and pediatric sufferers.

Advances in the Application of Electrospun Drug-Loaded Nanofibers in the Treatment of Oral Ulcers

Oral ulcers affect oral and systemic health and have high prevalence in the population. There are significant individual differences in the etiology and extent of the disease among patients. In the treatment of oral ulcers, nanofiber films can control the drug-release rate and enable long-term local administration. Compared to other drug-delivery methods, nanofiber films avoid the disadvantages of frequent administration and certain side effects. Electrospinning is a simple and effective method for preparing nanofiber films. Currently, electrospinning technology has made significant breakthroughs in energy-saving and large-scale production. This paper summarizes the polymers that enable oral mucosal adhesion and the active pharmaceutical ingredients used for oral ulcers. Moreover, the therapeutic effects of currently available electrospun nanofiber films on oral ulcers in animal experiments and clinical trials are investigated. In addition, solvent casting and cross-linking methods can be used in conjunction with electrospinning techniques. Based on the literature, more administration systems with different polymers and loading components can be inspired. These administration systems are expected to have synergistic effects and achieve better therapeutic effects. This not only provides new possibilities for drug-loaded nanofibers but also brings new hope for the treatment of oral ulcers.

Development and Characterizations of Pullulan and Maltodextrin-Based Oral Fast-Dissolving Films Employing a Box-Behnken Experimental Design

Migraine is a neurological disorder characterized by severe headaches, visual aversions, auditory, and olfactory disorders, accompanied by nausea and vomiting. Zolmitriptan (ZMT^®) is a potent 5HT1B/1D serotonin receptor agonist frequently used for the treatment of migraine. It has erratic absorption from the gastrointestinal tract (GIT), but its oral bioavailability is low (40-45%) due to the hepatic metabolism. This makes it an ideal candidate for oral fast dissolving formulations. Hence, the current study was undertaken to design and develop oral fast-dissolving films (OFDFs) containing ZMT for migraine treatment. The OFDFs were formulated by the solvent casting method (SCM) using Pullulan (PU) and maltodextrin (MDX) as film-forming agents and propylene glycol (PG) as a plasticizer. The strategy was designed using Box-Behnken experimental design considering the proportion of PU:MDX and percentage of PG as independent variables. The effectiveness of the OFDF's was measured based on the following responses: drug release at five min, disintegration time (D-time), and tensile strength (TS). The influence of formulation factors, including percent elongation (%E), thickness, water content, moisture absorption, and folding endurance on ZMT-OFDFs, were also studied. The results showed a successful fabrication of stable ZMT-OFDFs, with surface uniformity and amorphous shape of ZMT in fabricated films. The optimized formulation showed a remarkable rapid dissolution, over 90% within the first 5 min, a fast D-time of 18 s, and excellent mechanical characteristics. Improved maximum plasma concentration (C max) and area under the curve (AUC 0-t) in animals (rats) treated with ZMT-OFDFs compared to those treated with an intra-gastric (i-g) suspension of ZMT were also observed. Copolymer OFDFs with ZMT is an exciting proposition with great potential for the treatment of migraine headache. This study offers a promising strategy for developing ZMT-OFDFs using SCM. ZMT-OFDFs showed remarkable rapid dissolution and fast D-time, which might endeavor ZMT-OFDFs as an auspicious alternative approach to improve patient compliance and shorten the onset time of ZMT in migraine treatment.

Development of α-Tocopherol Succinate-Based Nanostructured Lipid Carriers for Delivery of Paclitaxel

The management of retinoblastoma (RB) involves the use of invasive treatment regimens. Paclitaxel (PTX), an effective antineoplastic compound used in the treatment of a wide range of malignant tumors, poses treatment challenges due to systemic toxicity, rapid elimination, and development of resistance. The goal of this work was to develop PTX-loaded, α-tocopherol succinate (αTS)-based, nanostructured lipid carrier (NLCs; αTS-PTX-NLC) and PEGylated αTS-PTX-NLC (αTS-PTX-PEG-NLC) to improve ocular bioavailability. The hot homogenization method was used to prepare the NLCs, and repeated measures ANOVA analysis was used for formulation optimization. αTS-PTX-NLC and αTS-PTX-PEG-NLC had a mean particle size, polydispersity index and zeta potential of 186.2 ± 3.9 nm, 0.17 ± 0.03, −33.2 ± 1.3 mV and 96.2 ± 3.9 nm, 0.27 ± 0.03, −39.15 ± 3.2 mV, respectively. The assay and entrapment efficiency of both formulations was >95.0%. The NLC exhibited a spherical shape, as seen from TEM images. Sterilized (autoclaved) formulations were stable for up to 60 days (last time point checked) under refrigerated conditions. PTX-NLC formulations exhibited an initial burst release and 40% drug release, overall, in 48 h. The formulations exhibited desirable physicochemical properties and could lead to an effective therapeutic option in the management of RB.

In Vitro and Ex Vivo Evaluation of Penetratin as a Non-invasive Permeation Enhancer in the Penetration of Salmon Calcitonin through TR146 Buccal Cells and Porcine Buccal Tissues

Buccal tissues are considered one of the potential alternative delivery route because of fast drug absorption and onset of action due to high vascularization and a non-keratinized epithelial membrane. In this study, the effect of Penetratin on the permeation of salmon calcitonin (sCT), a model macromolecular peptide drug, through TR146 buccal cells and porcine buccal tissues has been evaluated. To observe permeation profile of sCT, TR146 buccal cells were treated with Alexa 647 conjugated sCT (Alexa 647-sCT) with different concentrations of fluorescein isothiocyanate -labeled Penetratin (FITC-Penetratin) ranging from 0 to 40 μM, and analyzed using flow cytometry and confocal laser scanning microscopy. Intracellular penetration of FITC-Penetratin rapidly increased at low concentrations from 0 to 15 μM and it gradually increased at concentrations above 15 μM. Intracellular penetration of Alexa 647-sCT enhanced with the increase of FITC-Penetratin concentration. When TR146 cell layers and buccal tissues were co-treated with sCT and Penetratin as permeation enhancer, the flux of sCT increased as per Penetratin concentration. Compared to the control, 12.2 μM of Penetratin enhanced the flux of sCT in TR146 cell layers and buccal tissues by 5.5-fold and 93.7-fold, respectively. These results strongly suggest that Penetratin may successfully act as a non-invasive permeation enhancer for macromolecular peptide drug delivery through buccal routes.

Ciprofloxacin Loaded Nanostructured Lipid Carriers Incorporated into In-Situ Gels to Improve Management of Bacterial Endophthalmitis

Bacterial endophthalmitis (BE) is a potentially sight-threatening inflammatory reaction of the intraocular fluids or tissues caused by bacteria. Ciprofloxacin (CIP) eye drops are prescribed as first-line therapy in BE. However, frequent administration is necessary due to precorneal loss and poor ocular bioavailability. The objective of the current research was to prepare CIP containing nanostructured lipid carriers (CIP-NLCs) loaded an in situ gel system (CIP-NLC-IG) for topical ocular administration for enhanced and sustained antibacterial activity in BE treatment. CIP-NLCs were prepared by the hot homogenization method and optimized based on physicochemical characteristics and physical stability. The optimized CIP-NLC formulation was converted into CIP-NLC-IG with the addition of gellan gum as a gelling agent. Furthermore, optimized CIP-NLC and CIP-NLC-IG were evaluated for in vitro release and ex vivo transcorneal permeation studies, using commercial CIP ophthalmic solution (CIP-C) as the control. The optimized CIP-NLC formulation showed particle size, polydispersity index, zeta potential, assay and entrapment efficiency of 193.1 ± 5.1 nm, 0.43 ± 0.01, -32.5 ± 1.5 mV, 99.5 ± 5.5 and 96.3 ± 2.5%, respectively. CIP-NLC-IG with 0.2% w/v gellan gum showed optimal viscoelastic characteristics. The in vitro release studies demonstrated sustained release of CIP from CIP-NLC and CIP-NLC-IG formulations over a 24 h period. Transcorneal flux and permeability increased 4 and 3.5-fold, and 2.2 and 1.9-fold from CIP-NLC and CIP-NLC-IG formulations, respectively, when compared to CIP-C. The results demonstrate that CIP-NLC-IG could be considered as an alternate delivery system to prolong the residence time on the ocular surface after topical administration. Thus, the current CIP ophthalmic formulations may exhibit improved ocular bioavailability and prolonged antibacterial activity, which may improve therapeutic outcomes in the treatment of BE.

Hypromellose - A traditional pharmaceutical excipient with modern applications in oral and oromucosal drug delivery

Hydroxypropylmethylcellulose (HPMC), also known as Hypromellose, is a traditional pharmaceutical excipient widely exploited in oral sustained drug release matrix systems. The choice of numerous viscosity grades and molecular weights available from different manufacturers provides a great variability in its physical-chemical properties and is a basis for its broad successful application in pharmaceutical research, development, and manufacturing. The excellent mucoadhesive properties of HPMC predetermine its use in oromucosal delivery systems including mucoadhesive tablets and films. HPMC also possesses desirable properties for formulating amorphous solid dispersions increasing the oral bioavailability of poorly soluble drugs. Printability and electrospinnability of HPMC are promising features for its application in 3D printed drug products and nanofiber-based drug delivery systems. Nanoparticle-based formulations are extensively explored as antigen and protein carriers for the formulation of oral vaccines, and oral delivery of biologicals including insulin, respectively. HPMC, being a traditional pharmaceutical excipient, has an irreplaceable role in the development of new pharmaceutical technologies, and new drug products leading to continuous manufacturing processes, and personalized medicine. This review firstly provides information on the physical-chemical properties of HPMC and a comprehensive overview of its application in traditional oral drug formulations. Secondly, this review focuses on the application of HPMC in modern pharmaceutical technologies including spray drying, hot-melt extrusion, 3D printing, nanoprecipitation and electrospinning leading to the formulation of printlets, nanoparticle-, microparticle-, and nanofiber-based delivery systems for oral and oromucosal application. Hypromellose is an excellent excipient for formulation of classical dosage forms and advanced drug delivery systems. New methods of hypromellose processing include spray draying, hot-melt extrusion, 3D printing, and electrospinning.

In-situ Intestinal Absorption and Pharmacokinetic Investigations of Carvedilol Loaded Supersaturated Self-emulsifying Drug System

BACKGROUND

Carvedilol (CD), a non-selective beta-blocker, is indicated for the management of mild to moderate congestive heart failure. After oral administration, CD is rapidly absorbed with an absolute bioavailability of 18-25% because of low solubility and extensive first-pass metabolism.

OBJECTIVE

The present investigation focused on enhanced oral delivery of CD using supersaturated self-emulsifying drug delivery (SEDDS) system.

METHODS

Optimized SEDDS consisted of a blend of Oleic acid and Labrafil-M2125 as an oil-phase, Cremophor-RH40, polyethylene glycol-400 and HPMC-E5 as a surfactant, co-surfactant and supersaturation promoter respectively. Formulations were characterized for physical characteristics, invitro release in simulated and biorelevant dissolution media, intestinal permeability and bioavailability studies in Wistar rats. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) studies were used to confirm the crystalline nature and shape of the optimized formulation.

RESULTS

DSC and XRD, SEM studies showed that the drug was in amorphous form, and droplets were spherical in shape. Dissolution studies clearly showed distinct CD release in compendial and biorelevant dissolution media. The results from permeability and in-vivo studies depicted 2.2-folds and 3.2-folds increase in permeability and bioavailability, respectively from supersaturated SEDDS in comparison with control.

CONCLUSION

The results conclusively confirmed that the SEDDS formulation could be considered as a new alternative delivery vehicle for the oral supply of CD. Lay Summary: Carvedilol (CD) is a non-selective antihypertensive drug with poor oral bioavailability. Previously, various lipid delivery systems were reported with enhanced oral delivery. We developed suprsaturable SEDDS formulation with immediate onset of action. SEDDS formulation was developed and optimized as per the established protocols. The optimized SEDDS formulation was stable over three months and converted to solid and supersaturated SEDDS. The results from permeability and in-vivo studies demonstrated an enhancement in permeability and bioavailability from supersaturated SEDDS in comparison with control. The results conclusively confirmed that the SEDDS formulation could be considered as a new alternative delivery vehicle for the oral administration of CD.

Buccal adhesive films with moisturizer- the next level for dry mouth syndrome?

This study was undertaken to prepare films by solvent evaporation method comprising well-known polymers in order to investigate their potential for buccal suitability. Mucoadhesive films were manufactured using different polymers such as ethyl cellulose, hydroxyethyl cellulose, hydroxypropyl methylcellulose as well as carboxymethyl cellulose. Buccal films were evaluated in regards of mucoadhesiveness, swelling and physico-chemical properties. Furthermore rheological measurement and adhesion study were carried out on the buccal porcine mucosa. Moreover, allantoin as humectant was incorporated and trans-mucosal water loss was determined. The results showed that physico-chemical, buccal adhesive and swelling properties varied depending on the composition of the polymers. The findings indicated films containing allantoin to be suitable for buccal application. In completion, adhesive films are appropriate and promising formulations in the treatment of various disease in the intraoral cavity.

Preparation and in-vivo evaluation of dimenhydrinate buccal mucoadhesive films with enhanced bioavailability

Dimenhydrinate (DMH)-loaded buccal bioadhesive films for the prevention and treatment of motion sickness were prepared and optimized. This study examines the rate of drug release from the films for prolonged periods of time to reduce or limit the frequency of DMH administration. Based on preliminary studies using various polymers and concentrations, hydroxyethylcellulose (2.5, 3.0, and 3.2%), and xanthan gum (2.8%) were chosen as matrix polymers. The films were analyzed with respect to their mechanical, physicochemical, bioadhesive, swelling, and in-vitro release properties. In in-vivo pharmacokinetic studies, xanthan gum-based DMH buccal film was associated with significantly increased DMH plasma levels between 1 h and 5 h after DMH dosing when compared with an oral drug solution. The area under the curve AUC0-7 h value of the mucoadhesive buccal film was two-fold higher than the oral DMH solution. Histological analysis revealed that DMH films cause mild morphological and inflammatory changes in rabbit buccal mucosa. The DMH buccal film is effective for approximately 7 h, thus representing an option for single-dose antiemetic therapy. This dosage regimen could be particularly beneficial for chain travelers who travel for long periods of time.

Polymeric films as a promising carrier for bioadhesive drug delivery: Development, characterization and optimization

Bioadhesive films using tamarind seed polysaccharide were prepared for the treatment of candida vaginitis using nystatin as the model drug. Films were prepared by solvent casting method. A 3² factorial design was employed to study the effect of independent variables (polymer and plasticizer concentration) on a range of dependent variables namely mechanical, swelling, interfacial, and bioadhesive properties through response surface methodological approach, using Design Expert® software. Formulation composition that provided the most desired and optimized results was selected using desirability approach. Nystatin was solubilized using Tween 60 and was incorporated into the selected film. Drug solubilization and dispersion were confirmed by scanning electron microscopy and differential scanning calorimetry. The optimized film released 73.92 ± 2.54% of nystatin at the end of 8 h in simulated vaginal fluid and the release data showed best fit to Korsmeyer–Peppas model with R² of 0.9990 and the release mechanism to be super case-II. The optimized film also showed appropriate anti candida activity through appearance of zone of inhibition during antifungal activity testing study.

Bioadhesive okra polymer based buccal patches as platform for controlled drug delivery

In the present investigation, polysaccharide from the Okra fruits (Hibiscus esculentus) was extracted, characterized and explored for its mucoadhesive potential. Mucoadhesive films of okra polymer (OP) were prepared by solvent casting method based on 3(2) factorial design. For these studies, OP (2.0%, 2.5%, 3.0%, w/v) and glycerol (plasticizer) (0.25%, 0.50%, 0.75%, v/v) were taken as independent variables while tensile strength, mucoadhesive strength, contact angle, swelling index and residence time as dependent variables. The developed films were evaluated for their physicochemical, mechanical and electrical properties. The formulated films were found to be smooth, flexible, and displayed adequate mucoadhesive and tensile strength. Their near neutral pH and negative hemolytic studies indicated their non-irritability and biocompatible nature with biological tissues. The formulation comprising of 3% OP and 0.5% glycerol (F8) was found to exhibit optimum mechanical properties. Further, optimized film was loaded with zolmitriptan (model drug) to determine its drug release profiles. In vitro and ex vivo drug release studies demonstrated a controlled release of zolmitriptan over a period of 8h in simulated salivary fluid (SSF) pH 6.8, with the correlation coefficient values indicating its non-Fickian kinetics. Thus, OP can be used as a promising biomaterial for controlled drug delivery.

Oral transmucosal drug delivery--current status and future prospects

Oral transmucosal drug delivery (OTDD) dosage forms have been available since the 1980s. In contrast to the number of actives currently delivered locally to the oral cavity, the number delivered as buccal or sublingual formulations remains relatively low. This is surprising in view of the advantages associated with OTDD, compared with conventional oral drug delivery. This review examines a number of aspects related to OTDD including the anatomy of the oral cavity, models currently used to study OTDD, as well as commercially available formulations and emerging technologies. The limitations of current methodologies to study OTDD are considered as well as recent publications and new approaches which have advanced our understanding of this route of drug delivery.

Formulation of unidirectional release buccal patches of carbamazepine and study of permeation through porcine buccal mucosa

OBJECTIVE

To achieve transbuccal release of carbamazepine by loading in unidirectional release mucoadhesive buccal patches.

METHODS

Buccal patches of carbamazepine with unidirectional drug release were prepared using hydroxypropyl methyl cellulose, polyvinyl alcohol, polyvinyl pyrrolidone and ethyl cellulose by solvent casting method. Water impermeable backing layer (Pidilite® Biaxially-oriented polypropylene film) of patches provided unidirectional drug release. They were evaluated for thickness, mass uniformity, surface pH and folding endurance. Six formulations FA2, FA8, FA10, FB1, FB14 and FB16 (folding endurance above 250) were evaluated further for swelling studies, ex vivo mucoadhesive strength, ex vivo mucoadhesion time, In vitro drug release, ex vivo permeation, accelerated stability studies and FTIR and XRD spectral studies.

RESULTS

The ex vivo mucoadhesion time of patches ranged between 109 min (FA10) to 126 min (FB14). The ex vivo mucoadhesive force was in the range of 0.278 to 0.479 kg/m/s. The In vitro drug release studies revealed that formulation FA8 released 84% and FB16 released 99.01% of drug in 140 min.

CONCLUSIONS

The prepared unidirectional buccal patches of carbamazepine provided a maximum drug release within specified mucoadhesion period and it indicates a potential alternative drug delivery system for systemic delivery of carbamazepine.

The influence of recrystallized caffeine on water-swellable polymethacrylate mucoadhesive buccal films

The aim of this work was to investigate the influence of particles on the properties of polymethacrylate films intended for buccal delivery. A solvent casting method was used with Eudragit RS and RL (ERS and ERL, respectively) as film-forming rate-controlling polymers, with caffeine as a water-soluble model drug. The physicochemical properties of the model films for a series of formulations with increasing concentrations of caffeine were determined in terms of morphology, mechanical and mucoadhesive properties, drug content uniformity, and drug release and associated kinetics. Typically regarded as non-mucoadhesive polymers, ERS and mainly ERL, were found to be good mucoadhesives, with ERL01 exhibiting a work of mucoadhesion (WoA) of 118.9 μJ, which was about five to six times higher than that observed for commonly used mucoadhesives such as Carbopol(®) 974P (C974P, 23.9 μJ) and polycarbophil (PCP, 17.4 μJ). The mucoadhesive force for ERL01 was found to be significantly lower yet comparable to C974P and PCP films (211.1 vs. 329.7 and 301.1 mN, respectively). Inspection of cross-sections of the films indicated that increasing the concentration of caffeine was correlated with the appearance of recrystallized agglomerates. In conclusion, caffeine agglomerates had detrimental effects in terms of mucoadhesion, mechanical properties, uniformity, and drug release at large particle sizes. ERL series of films exhibited very rapid release of caffeine while ERS series showed controlled release. Analysis of release profiles revealed that kinetics changed from a diffusion controlled to a first-order release mechanism.