Aerosolized Delivery of Antifungal Agents

Navigating Uncertainty: Managing Influenza-Associated Invasive Pulmonary Aspergillosis in an Intensive Care Unit

We present a challenging case of a patient admitted to an intensive care unit with influenza-associated pulmonary aspergillosis (IAPA). The clinical course was characterised by refractory fungal pneumonia and tracheobronchitis, suspected drug-induced liver injury due to triazole antifungals, and secondary bacterial infections with multidrug-resistant microorganisms, resulting in a fatal outcome despite the optimisation of antifungal treatment through therapeutic drug monitoring. This case underscores the complexity that clinicians face in managing critically ill patients with invasive fungal infections.

Myocardial Cell Preservation from Potential Cardiotoxic Drugs: The Role of Nanotechnologies

Cardiotoxic therapies, whether chemotherapeutic or antibiotic, represent a burden for patients who may need to interrupt life-saving treatment because of serious complications. Cardiotoxicity is a broad term, spanning from forms of heart failure induction, particularly left ventricular systolic dysfunction, to induction of arrhythmias. Nanotechnologies emerged decades ago. They offer the possibility to modify the profiles of potentially toxic drugs and to abolish off-target side effects thanks to more favorable pharmacokinetics and dynamics. This relatively modern science encompasses nanocarriers (e.g., liposomes, niosomes, and dendrimers) and other delivery systems applicable to real-life clinical settings. We here review selected applications of nanotechnology to the fields of pharmacology and cardio-oncology. Heart tissue-sparing co-administration of nanocarriers bound to chemotherapeutics (such as anthracyclines and platinum agents) are discussed based on recent studies. Nanotechnology applications supporting the administration of potentially cardiotoxic oncological target therapies, antibiotics (especially macrolides and fluoroquinolones), or neuroactive agents are also summarized. The future of nanotechnologies includes studies to improve therapeutic safety and to encompass a broader range of pharmacological agents. The field merits investments and research, as testified by its exponential growth.

Inhaled Antifungal Agents for Treatment and Prophylaxis of Bronchopulmonary Invasive Mold Infections

Pulmonary mold infections are life-threatening diseases with high morbi-mortalities. Treatment is based on systemic antifungal agents belonging to the families of polyenes (amphotericin B) and triazoles. Despite this treatment, mortality remains high and the doses of systemic antifungals cannot be increased as they often lead to toxicity. The pulmonary aerosolization of antifungal agents can theoretically increase their concentration at the infectious site, which could improve their efficacy while limiting their systemic exposure and toxicity. However, clinical experience is poor and thus inhaled agent utilization remains unclear in term of indications, drugs, and devices. This comprehensive literature review aims to describe the pharmacokinetic behavior and the efficacy of inhaled antifungal drugs as prophylaxes and curative treatments both in animal models and humans.

Beyond the Guidelines: Treatment of Allergic Bronchopulmonary Aspergillosis in Cystic Fibrosis

OBJECTIVE

To review the available literature addressing alternative allergic bronchopulmonary aspergillosis (ABPA) treatment options for patients with cystic fibrosis (CF).

DATA SOURCES

A literature search of PubMed was performed (January 2002 to April 2021) using the following search terms: allergic bronchopulmonary aspergillosis, aspergillus-related lung disease, cystic fibrosis. Manufacturer prescribing information, clinical practice guidelines, and data from ClinicalTrials.gov were incorporated in the reviewed data.

STUDY SELECTION AND DATA EXTRACTION

Relevant English-language studies or those conducted in humans were considered for inclusion.

DATA SYNTHESIS

Available literature for alternative ABPA treatments in CF is lacking randomized controlled trials, but there is considerable support in case reports and case series describing the benefits in pediatric and adult patients. Recent literature has begun to explore the place in therapy for novel, corticosteroid-sparing treatment approaches. The alternative therapies summarized in this review all resulted in clinical improvement and subsequent discontinuation or dose reductions of oral corticosteroids, with minimal reported adverse drug effects.

RELEVANCE TO PATIENT CARE AND CLINICAL PRACTICE

Although corticosteroids are the cornerstone of ABPA management, the toxicities can be significant limitations in an already high-risk patient population. Patients may fail or become intolerant to guideline-recommended therapies and require alternative treatment approaches.

CONCLUSIONS

Alternative treatment modalities for ABPA in patients with CF, including azole antifungals, pulsed intravenous glucocorticoids, omalizumab, mepolizumab, and inhaled amphotericin, appear to be efficacious and well tolerated. Pharmacological properties including route of administration, storage and stability, beyond use dating, and adverse effects of the various treatment modalities must be considered when selecting a practical care plan for patients.

Interaction in vitro of pulmonary surfactant with antifungal agents used for treatment and prevention of invasive aspergillosis

BACKGROUND

Optimizing antifungal therapy is important to improve outcomes in severely immunocompromised patients.

OBJECTIVES

We analysed the in vitro interaction between pulmonary surfactant and antifungal agents used for management of invasive pulmonary aspergillosis.

METHODS

Amphotericin B formulations, mould-active triazoles and echinocandins were tested in vitro against 24 clinical isolates of different Aspergillus spp. with and without the addition of a commercial porcine surfactant (Curosurf®; Poractant alfa, Nycomed, Austria). The data are presented as MIC or minimum effective concentration (MEC) ranges, as MIC or MEC values that inhibited 90% of the isolates (MIC90 or MEC90) and as geometric mean (GM) MIC or MEC values.

RESULTS

For amphotericin B products, addition of surfactant to a final concentration of 10% led to a statistically significant reduction of the GM MIC for all Aspergillus isolates tested after 24 h (0.765 versus 0.552 mg/L; P < 0.05). For the mould-active triazoles, addition of 10% surfactant resulted in a significantly higher GM MIC at 48 h (0.625 versus 0.898 mg/L; P < 0.05). For the echinocandins, the addition of 10% surfactant led to a significantly higher GM MEC after both 24 h (0.409 versus 0.6532 mg/L; P < 0.01) and 48 h (0.527 versus 0.9378 mg/L; P < 0.01). There were no meaningful differences between individual members of the three existing classes of antifungal agents or between the different Aspergillus spp. tested.

CONCLUSIONS

Using EUCAST methodology, addition of porcine surfactant up to a concentration of 10% had a minor, and presumably non-relevant, impact on the in vitro activity of antifungal agents used in prophylaxis and treatment of invasive pulmonary aspergillosis.

Inhaled Antifungal Agents for the Treatment and Prophylaxis of Pulmonary Mycoses

Pulmonary mycoses are associated with high morbidity and mortality. The current standard treatment by systemic administration is limited by inadequate local bioavailability and systemic toxic effects. Aerosolisation of antifungals is an attractive approach to overcome these problems, but no inhaled antifungal formulation is currently available for the treatment of pulmonary mycoses. Hence, the development of respirable antifungals formulations is of interest and in high demand. In this review, the recent advances in the development of antifungal formulations for pulmonary delivery are discussed, including both nebulised and dry powder formulations. Although the clinical practices of nebulised parenteral amphotericin B and voriconazole formulations (off-label use) are reported to show promising therapeutic effects with few adverse effects, there is no consensus about the dosage regimen (e.g. the dose, frequency, and whether they are used as single or combination therapy). To maximise the benefits of nebulised antifungal therapy, it is important to establish standardised protocol that clearly defines the dose and specifies the device and the administration conditions. Dry powder formulations of antifungal agents such as itraconazole and voriconazole with favourable physicochemical and aerosol properties are developed using various powder engineering technologies, but it is important to consider their suitability for use in patients with compromised lung functions. In addition, more biological studies on the therapeutic efficacy and pharmacokinetic profile are needed to demonstrate their clinical potential.

An open-label non-inferiority randomised control trial comparing nebulised amphotericin B with oral itraconazole in patients with pulmonary aspergilloma

BACKGROUND

Pulmonary aspergilloma (PA) is a common complication seen in patients with pulmonary tuberculosis sequelae. Antifungal therapy, including oral azoles, is commonly used though only surgical resection offers curative benefit. Local administration of amphotericin B, like intracavitary instillation, has been effective in aspergilloma patients though nebulised amphotericin B (nAB) has never been formally assessed.

OBJECTIVE

The aim of this prospective, non-inferior, open-label, randomised control trial is to evaluate the efficacy and safety of nebulised amphotericin B compared to oral itraconazole therapy in the treatment of PA.

PATIENTS/METHODS

Diagnosed cases of PA (n=33) were randomised into the control group receiving oral itraconazole (n=18) and intervention group receiving nebulised amphotericin B (n = 15). Response to treatment was assessed both clinically and radiologically at the end 6 months.

RESULTS AND CONCLUSION

The number of patients showing overall improvement at the end of 6 months in the control arm(oral itraconazole) vs intervention arm(nebulised amphotericin B) was 65% (95% CI 38.3-85.8) and 67%(95% CI 38.4%-88.2%), respectively, in the intention-to-treat and 79% (95% CI 49.2%-95.3%), and 65% (95% CI 38.4%-88.2%), respectively, in the per-protocol analysis. While there was no statistically significant difference between the intervention and control arm in both the analyses, non-inferiority was shown in the per-protocol but not in the intention-to-treat analysis. No major adverse events were noted in either group; however, a significant proportion of patients receiving nAB reported minor cough (40%), which, however, did not lead to discontinuation of therapy in any patients. Nebulised amphotericin B can be an effective therapeutic option for pulmonary aspergilloma patients.

Advanced spray dried proliposomes of amphotericin B lung surfactant-mimic phospholipid microparticles/nanoparticles as dry powder inhalers for targeted pulmonary drug delivery

The purpose of this study was to design, develop and characterize inhalable proliposomal microparticles/nanoparticles of Amphotericin B (AmB) with synthetic phospholipids, dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylglycerol (DPPG) which are lung surfactant-mimic phospholipids. Organic solutions of AmB and phospholipids, were co-spray dried using an advanced closed-mode system and a high performance cyclone. Scanning electron microscopy (SEM) was employed to visualize the surface structure, morphology, and particles size. The residual water content of the proliposomes was quantified by Karl Fisher coulometric titration (KFT). Degree of crystallinity/non-crystallinity was measured by X-ray powder diffraction (XRPD). Phase behavior was measured by differential scanning calorimetry. The chemical composition by molecular fingerprinting was established using attenuated total reflectance (ATR)-Fourier-transform infrared (FTIR) spectroscopy. The amount of AmB loaded into the proliposomes was quantified using UV-VIS spectroscopy. The in vitro aerosol dispersion performance was conducted using the Next Generation Impactor (NGI) and the human dry powder inhaler (DPI) (Handihaler®) that is FDA-approved. Different human lung cell lines were employed to demonstrate in vitro safety as a function of dose and formulation. Smooth, spherical microparticles/nanoparticles were formed at medium and high spray drying pump rates and had low residual water content. A characteristic peak in the XRPD diffraction pattern as well as an endotherm in DSC confirmed the presence of the lipid bilayer structure characteristic in the DPPC/DPPG proliposomal systems. Superior in vitro aerosol performance was achieved with engineered microparticles/nanoparticles demonstrating suitability for targeted pulmonary drug delivery as inhalable dry powders. The in vitro cellular studies demonstrated that the formulated proliposomes are safe. These AmB proliposomes can be a better option for targeted treatment of severe pulmonary fungal infections.

Clinical Feasibility and Airway Deposition of Nebulized Voriconazole in Healthy Horses

Voriconazole (VRC) is a potential treatment for pneumomycosis in horses. The objectives of this study were to determine if the delivery of Vfend using a Flexineb nebulizer produced clinically significant [VRC] in lower airways. The hypothesis was that [VRC] after delivery by nebulization would be greater in the pulmonary epithelial lining fluid than plasma. A secondary objective was to determine [VRC] in upper airways through the collection of nasopharyngeal wash (NPW) samples. Voriconazole solution [Vfend-6.25 mg/mL, 100 (n = 2), 200 (n = 3), 500 (n = 1) mg] was nebulized once in 6 healthy geldings. Clinical responses, duration of nebulization, and [VRC] at various time points (up to 8 hours) in plasma, bronchoalveolar lavage fluid (BALF) supernatant and cell pellet, and NPW samples were recorded. Voriconazole (Vfend-6.25 mg/mL, 200 mg) was nebulized in 5 additional, healthy geldings, and [VRC] was measured in NPW samples pre- and postnebulization at time points up to 8 hours. The antifungal activity of BALF and NPW samples was determined using agar disk diffusion. Concentrations of voriconazole were below detection in plasma, BALF supernatant, and cell pellets for all time points and doses except the BALF cell pellet (0.4 μg/g) immediately after nebulization of 500 mg. For 5 horses, administered 200 mg of Vfend, mean [VCR] in NPW at the end of nebulization and 1, 6, and 8 hours postnebulization were: 30.8 ± 29, 1.0 ± 0.84, 0.2 ± 0.19, and 0.34 ± 0.67 μg/mL, respectively. Only NPW samples obtained immediately postnebulization showed antifungal activity. A nebulized Vfend solution is not recommended for the treatment of pneumomycosis in horses.

Inhaled Liposomal Antimicrobial Delivery in Lung Infections

The management of difficult-to-treat acute and chronic respiratory infections (infections in cystic fibrosis, non-cystic fibrosis bronchiectasis, immunocompromised and mechanically ventilated patients) and difficult-to-treat pathogens (including multidrug-resistant strains) has become a challenge in clinical practice. The arsenal of conventional antibiotic drugs can be limited by tissue penetration, toxicities, or increasing antibiotic resistance. Inhaled antimicrobials are an interesting therapeutic approach for optimizing the management of respiratory infections. Due to extensive developments in liposome technology, a number of inhaled liposome-based antibiotic and antifungal formulations are available for human use and many products are undergoing clinical trials. Liposomes are biocompatible, biodegradable, and nontoxic vesicles able to encapsulate and carry antimicrobials, enhancing the therapeutic index of various agents and retention at the desired target within the lung. Liposomes reduce drug toxicity and improve tolerability, leading to better compliance and to decreased respiratory side effects. The aim of this article was to provide an up-to-date overview of nebulized liposomal antimicrobials for lung infections (with a special focus on liposomal amikacin, tobramycin, ciprofloxacin, and amphotericin B for inhalation), discussing the feasibility and therapeutic potential of these new strategies of preventing and treating bacteria, mycobacterial and fungal infections.

Amorphous solid dispersion dry powder for pulmonary drug delivery: Advantages and challenges

Amorphous solid dispersion (ASD) is commonly used in pharmaceutical industry. It has been mainly employed to enhance the oral bioavailability of poorly water-soluble drugs that belong to class II and IV of the biopharmaceutical classification system but has showed promise in other areas of pharmaceutical research. In this review, the potential and limitations of ASD dry powder for inhalation are discussed. ASD powder for inhalation (ASD-IP) is commonly prepared by spray drying technique. The physicochemical characteristics of ASD-IP could be tailored to achieve effective lung deposition. ASD-IP could also attain rapid dissolution behavior to achieve therapeutically effective concentration either locally or systemically before particle clearance in the lung. The key challenges of using ASD powder for inhalation include the possible chemical and/or physical instability of the amorphous phase during manufacturing and in vivo, and the moisture and temperature sensitivity of ASD-IP that affects its storage stability.

Emerging antibacterial nanomedicine for enhanced antibiotic therapy

This review highlights the different mechanisms of current nano-antibiotic systems for combatting serious antibiotic resistance of bacteria.

Enhanced Aerosolization of High Potency Nanoaggregates of Voriconazole by Dry Powder Inhalation

Invasive pulmonary aspergillosis is a deadly fungal infection with a high mortality rate, particularly in patients having undergone transplant surgery. Voriconazole, a triazole antifungal pharmaceutical product, is considered as a first-line therapy for invasive pulmonary aspergillosis, and exhibits efficacy even for patients who have failed other antifungal drug therapies. The objective of this study is to develop high potency nanoaggregates of crystalline voriconazole composition for dry powder inhalation using the particle engineering process, thin film freezing. In this study, mannitol at low concentrations acted as a surface texture-modifying agent, and we evaluated the physicochemical and aerodynamic properties of the voriconazole formulations containing different amounts of mannitol. In vitro aerosol performance data demonstrated that powder formulations consisting of 90 to 97% (w/w) voriconazole were the optimum for inhalation with a fine particle fraction (% of delivered dose) as high as 73.6 ± 3.2% and mass median aerodynamic diameter of 3.03 ± 0.17 μm when delivered by a commercially available device. The thin film freezing process enabled phase-separated submicron crystalline mannitol to be oriented such as to modify the surface texture of the crystalline voriconazole nanoaggregates, thus enhancing their aerosolization. Addition of as low as 3% (w/w) mannitol significantly increased the fine particle fraction (% of metered dose) of voriconazole nanoaggregates when compared to compositions without mannitol (40.8% vs 24.6%, respectively). The aerosol performance of the voriconazole nanoaggregates with 5% (w/w) mannitol was maintained for 13 months at 25 °C/60% RH. Therefore, voriconazole nanoaggregates having low amounts of surface texture-modifying mannitol made by thin film freezing are a feasible local treatment option for invasive pulmonary aspergillosis with high aerosolization efficiency and drug loading for dry powder inhalation.

Radioaerosol Imaging Predicts the Utility of Aerosolized Antifungal Therapy in Allergic Bronchopulmonary Aspergillosis

A 10-year-old girl with a history of complicated cystic fibrosis was hospitalized for pulmonary exacerbation with allergic bronchopulmonary aspergillosis and severe right upper lobe bronchiectasis diagnosed with chest radiograph and CT. She was started on itraconazole during the hospitalization in attempt to decrease her systemic steroid dose, but she had ongoing coughing and wheezing. The possibility was raised that the right upper lobe bronchiectasis may be a nidus for ongoing aspergillosis. Radioaerosol imaging was performed to determine whether the aerosolized antifungals would reach the area of bronchiectasis.

Carriers for the targeted delivery of aerosolized macromolecules for pulmonary pathologies

INTRODUCTION

Macromolecules with unique effects and potency are increasingly being considered for application in lung pathologies. Numerous delivery strategies for these macromolecules through the lung have been investigated to improve the targeting and overall efficacy.

AREAS COVERED

Targeting approaches from delivery devices, formulation strategies and specific targets are discussed.

EXPERT OPINION

Although macromolecules are a heterogeneous group of molecules, a number of strategies have been investigated at the macro, micro, and nanoscopic scale for the delivery of macromolecules to specific sites and cells of lung tissues. Targeted approaches are already in use at the macroscopic scale through inhalation devices and formulations, but targeting strategies at the micro and nanoscopic scale are still in the laboratory stage. The combination of controlling lung deposition and targeting after deposition, through a combination of targeting strategies could be the future direction for the treatment of lung pathologies through the pulmonary route.

Pulmonary drug delivery system: newer patents

Inhalational route for drug delivery and desired effects has been known since centuries. This lung-targeted therapy has benefited asthmatics and those with chronic respiratory problems. The technique has evolved greatly from crude pots and pipes to modern sophisticated drug-dispensing devices. This mode is effective, rapid and safe. Its outcome, however, is majorly determined by drug formulation, device structure and patient's coordinating skill. In spite of great advances in this field, more efforts are required to meet the unmet needs. This noninvasive mode is being increasingly studied for transfer of drugs for systemic action with promising results. The present article is an attempt to capture the recent development and progress in this field and review relevant newer patents.

The antifungal pipeline: a reality check

Invasive fungal infections continue to appear in record numbers as the immunocompromised population of the world increases, owing partially to the increased number of individuals who are infected with HIV and partially to the successful treatment of serious underlying diseases. The effectiveness of current antifungal therapies - polyenes, flucytosine, azoles and echinocandins (as monotherapies or in combinations for prophylaxis, or as empiric, pre-emptive or specific therapies) - in the management of these infections has plateaued. Although these drugs are clinically useful, they have several limitations, such as off-target toxicity, and drug-resistant fungi are now emerging. New antifungals are therefore needed. In this Review, I discuss the robust and dynamic antifungal pipeline, including results from preclinical academic efforts through to pharmaceutical industry products, and describe the targets, strategies, compounds and potential outcomes.

Development of an inhaled controlled release voriconazole dry powder formulation for the treatment of respiratory fungal infection

The present research aimed to develop and characterize a sustained release dry powder inhalable formulation of voriconazole (VRZ) for invasive pulmonary aspergillosis. The developed formulations were studied for their in vitro release profile, aerosol, and physicochemical properties as well as interactions with lung epithelia in terms of toxicity and transport/uptake. VRZ and VRZ loaded poly lactide microparticles (VLM) were prepared by aqueous/organic cosolvent and organic spray drying, respectively. Powders were characterized using laser diffraction, differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD), dynamic vapor sorption (DVS), and electron microscopy. Aerosol performance was evaluated using an RS01 dry powder inhaler and in vitro cascade impaction. Uptake across Calu-3 lung epithelia was studied, using aerosol deposition of the powder onto cells cultured in an air interface configuration, and compared to dissolution using a conventional dialysis membrane. Additionally, toxicity of VRZ and VLM and the potential impact of transmembrane proteins on uptake were investigated. The particle size and the aerosol performance of spray-dried VRZ and VLM were suitable for inhalation purposes. VRZ exhibited a median volume diameter of 4.52 ± 0.07 μm while VLM exhibited 2.40 ± 0.05 μm. Spray-dried VRZ was crystalline and VLM amorphous as evaluated by DSC and XRPD, and both powders exhibited low moisture sorption between 0 and 90% RH (<1.2% w/w) by DVS. The fine particle fraction (FPF) (% aerosol <5 μm) for the VRZ was 20.86 ± 1.98% while the VLM showed significantly improved performance (p < 0.01) with an FPF of 43.56 ± 0.13%. Both VRZ and VLM were not cytotoxic over a VRZ concentration range of 1.2 nM to 30 μM, and the VLM particles exhibited a sustained release over 48 h after being deposited on the Calu-3 cell line or via conventional dialysis-based dissolution measurements. Lastly, VRZ exhibited polarized transport across epithelia with basal to apical transport being slower than apical to basal. Influx and efflux transports may also play a role as transport was altered in the presence of a number of inhibitors. This study has established an inhalable and sustained release powder of VRZ for targeting invasive pulmonary aspergillosis.

Inhaled formulations and pulmonary drug delivery systems for respiratory infections

Respiratory infections represent a major global health problem. They are often treated by parenteral administrations of antimicrobials. Unfortunately, systemic therapies of high-dose antimicrobials can lead to severe adverse effects and this calls for a need to develop inhaled formulations that enable targeted drug delivery to the airways with minimal systemic drug exposure. Recent technological advances facilitate the development of inhaled anti-microbial therapies. The newer mesh nebulisers have achieved minimal drug residue, higher aerosolisation efficiencies and rapid administration compared to traditional jet nebulisers. Novel particle engineering and intelligent device design also make dry powder inhalers appealing for the delivery of high-dose antibiotics. In view of the fact that no new antibiotic entities against multi-drug resistant bacteria have come close to commercialisation, advanced formulation strategies are in high demand for combating respiratory 'super bugs'.

Nebulized voriconazole in infections with Scedosporium apiospermum--case report and review of the literature

Scedosporium infections are rare complications in immunocompromised patients or patients with chronic pulmonary disease. While Scedosporium prolificans is resistant to most antimycotics, Scedosporium apiospermum is usually sensitive to voriconazole and posaconazole. Pharmacokinetics and efficacy of nebulized voriconazole have been described in a murine model previously. We report for the first time the safe and effective use of nebulized voriconazole for the treatment of severe pulmonary infection with Scedosporium apiospermum in an adolescent with cystic fibrosis.

Fumigation in Ayurveda: potential strategy for drug discovery and drug delivery

ETHNOPHARMACOLOGICAL RELEVANCE

Ayurveda has its unique perceptions and resultant methodologies for defining and treating human diseases. Fumigation therapy is one of the several treatment methods described in Ayurveda whereby fumes produced from defined drug formulations are inhaled by patients. This therapeutic procedure offers promising research opportunities from phytochemical and ethnopharmacological viewpoints, however, it remains under-noticed. Considering these facts, this review is primarily aimed at introducing said Ayurvedic fumigation therapy and discussing its scientific gaps and future challenges.

METHODOLOGY

A search of multiple bibliographical databases and traditional Ayurvedic text books was conducted and the articles analyzed under various key themes, e.g., Ayurvedic fumigation, fumigation therapy, medicinal fumigation, inhalation of drugs and aerosol therapy.

RESULT

Ayurveda recommends fumigation as a method of sterilization and therapeutic procedure for various human diseases including microbial infections and psychological disorders. However, it has not gained much attention as a prospective field with multiple research opportunities.

CONCLUSION

It is necessary to have a more detailed and systematic investigation of the phytochemical and pharmacodynamic properties of Ayurvedic fumigation therapy in order to facilitate the identification of novel bioactive compounds and more effective drug administration methods.

Pharmacokinetic evaluation in mice of amorphous itraconazole-based dry powder formulations for inhalation with high bioavailability and extended lung retention

Three Itraconazole (ITZ) dry powders for inhalation (DPI) were prepared by spray-drying a mannitol solution in which the ITZ was in suspension (F1) or was in solution without (F2) or with phospholipid (PL) (F3). These powders were endotracheally insufflated in vivo at a single dose of 0.5mg/kg for pharmacokinetic profile (lung and plasma concentration) determination in ICR CD-1 mice. ITZ was crystalline in F1 and assumed to be amorphous in the F2 and F3 formulations. F2 and F3 formulations allowed the in vitro formation of an ITZ supersaturated solution with a maximum solubility of 450±124ng/ml (F2) and 498±44ng/ml (F3), in contrast to formulation F1 (<10ng/ml). As a result of these higher solubilities, absorption into the systemic compartment after endotracheal administration was faster for formulations F2 and F3 (shorter tmax) and in larger quantities compared to the F1 formulation (plasmatic AUC0-24h of 182ngh/ml, 491.5ngh/ml and 376.8ngh/ml, and tmax of 60min, 30min and 5min for F1, F2 and F3, respectively). PL increased the systemic bioavailability of ITZ (determined by the AUCplasma to AUClung ratio) as a consequence of their wetting and absorption enhancement effect. ITZ lung concentrations after pulmonary administration remained higher than the targeted dose, based on the minimal inhibitory concentrations for Aspergillus fumigatus (2μg/glung), 24h post-administration for both F1 and F2 formulations. However, this was not the case for formulation F3, which exhibited a faster elimination rate from the lung, with an elimination half-life of 4.1h vs. 6.5h and 14.7h for F1 and F2, respectively.

New inhalation-optimized itraconazole nanoparticle-based dry powders for the treatment of invasive pulmonary aspergillosis

PURPOSE

Itraconazole (ITZ) dry powders for inhalation (DPI) composed of nanoparticles (NP) embedded in carrier microparticles were prepared and characterized.

METHODS

DPIs were initially produced by reducing the ITZ particle size to the nanometer range using high-pressure homogenization with tocopherol polyethylene 1000 succinate (TPGS, 10% w/w ITZ) as a stabilizer. The optimized nanosuspension and the initial microsuspension were then spray-dried with different proportions of or in the absence of mannitol and/or sodium taurocholate. DPI characterization was performed using scanning electron microscopy for morphology, laser diffraction to evaluate the size-reduction process, and the size of the dried NP when reconstituted in aqueous media, impaction studies using a multistage liquid impactor to determine the aerodynamic performance and fine-particle fraction that is theoretically able to reach the lung, and dissolution studies to determine the solubility of ITZ.

RESULTS

Scanning electron microscopy micrographs showed that the DPI particles were composed of mannitol microparticles with embedded nano- or micro-ITZ crystals. The formulations prepared from the nanosuspension exhibited good flow properties and better fine-particle fractions, ranging from 46.2% ± 0.5% to 63.2% ± 1.7% compared to the 23.1% ± 0.3% that was observed with the formulation produced from the initial microsuspension. Spray-drying affected the NP size by inducing irreversible aggregation, which was able to be minimized by the addition of mannitol and sodium taurocholate before the drying procedure. The ITZ NP-based DPI considerably increased the ITZ solubility (58 ± 2 increased to 96 ± 1 ng/mL) compared with that of raw ITZ or an ITZ microparticle-based DPI (<10 ng/mL).

CONCLUSION

Embedding ITZ NP in inhalable microparticles is a very effective method to produce DPI formulations with optimal aerodynamic properties and enhanced ITZ solubility. These formulations could be applied to other poorly water-soluble drugs and could be a very effective alternative for treating invasive pulmonary aspergillosis.