Porous Microspheres Comprising CoSe2 Nanorods Coated with N-Doped Graphitic C and Polydopamine-Derived C as Anodes for Long-Lived Na-Ion Batteries

Synergistically Designed Carbon-Free MoS2/MoO2 Heterostructure Anodes with Interfacial Covalent Bonds for High-Rate Sodium-Ion Batteries

The development of hierarchical heterostructured materials for sodium-ion batteries (SIBs) remains hindered by suboptimal high-rate cycling performance, primarily due to phase interface pulverization and separation during charge-discharge processes. To address these challenges, we designed a carbon-free hierarchical structure comprising few-layered MoS₂ nanosheets and MoO₂ nanocrystals through precise compositional optimization and rational structural engineering. The heterogeneous components are interconnected through robust S─O covalent bonds, which theoretical calculations and experimental results confirm generate a built-in electric field at the heterointerfaces, significantly enhancing reaction kinetics. Crucially, these covalent bonds stabilize the heterointerfaces, improving structural integrity and mitigating electrode material agglomeration and pulverization. Additionally, the MoS₂/MoO₂ heterostructure enhances Na⁺ adsorption energetics and reduces Na⁺ diffusion barriers, facilitating efficient ion transport. Leveraging its abundant heterointerfaces and stable architecture, the composite delivers exceptional rate performance (432.7 mAh·g⁻¹ at 10 A·g⁻¹) and outstanding cycling stability (nearly 100% capacity retention over 400 cycles at 5 A·g⁻¹). This work provides a strategic framework for designing heterostructured materials with stable interface-rich architectures, advancing the development of high-performance conversion/alloy-type anodes for energy storage applications.

Mussel-inspired self-assembly of silver nanoclusters into multifunctional silver aerogels for enhanced catalytic and bactericidal applications

Silver nanoclusters (AgNCs) have shown broad application prospects in catalysis, sensing, and biological fields. However, the limited stability of AgNCs has become the main challenge restricting their practical application in complex environments. Herein, a mussel-inspired, dopamine-assisted self-assembly approach is reported to fabricate 3D AgNC aerogels (PDA/AgNCs), which possess significantly enhanced structural stability and synergistic functional properties. The prepared AgNC aerogels display a hierarchical network structure with an ultrafine ligament size of 10.3 ± 1.2 nm and a high specific surface area of 50.7 m2 g-1. The gelation mechanism is elucidated by in-depth characterization and time-lapse monitoring of the gelation process vis spectroscopic and microscopic approaches. Owing to the distinct features of aerogels and the synergistic effect of AgNCs and PDA, the fabricated aerogels can not only efficiently decolorize dyes with a faster kinetic than individual AgNCs, but also exhibit remarkable broad-spectrum antimicrobial activity. Consequently, a conceptual water-treatment device is established by depositing PDA/AgNC aerogels on the cotton substrate, which shows good performance in both catalytic dye degradation and bacterial killing in the flowing system. This mussel-inspired self-assembly strategy has great potential in developing robust AgNC-based functional materials, which also provides a new guideline for designing sophisticated materials with integrated functions and synergistic properties.

Synchronously Formed Hetero- and Hollow Core-Branch Nanostructure Toward Wideband Electromagnetic Wave Absorption

The intrinsic limitation of low electrical conductivity of MoSe2 resulted in inferior dielectric properties, which restricts its electromagnetic wave absorption (EMWA) performances. Herein, a bimetallic selenide of MoSe2/CoSe2@N-doped carbon (NC) composites with hollow core-branch nanostructures are synthesized via the selenization treatment of MoO3 nanorods coated with ZIF-67. By adjusting the mass ratio of ZIF-67 to MoO3, the electromagnetic parameters and morphologies of composites are finely tuned, further ameliorating the impedance matching and EMWA performances. The involvement of NC improves the electronic conductivity of the composites. The synchronously formed heterostructure not only facilitates charge transfer but also leads to the accumulation and uneven distribution of charges, thus enhancing the conductive loss and polarization loss. The hollow core-branch nanostructure provides abundant conductive networks, heterointerfaces, and voids, significantly enhancing the EMWA property. Density functional theory implies that the heterostructures effectively boost charge transport and change charge distribution, which heightens the conductive loss and polarization loss. As a result, the composites demonstrate a minimum reflection loss value of -53.53 dB at 9.04 GHz, alongside a maximum effective absorption bandwidth of 6.32 GHz. This work offers invaluable insights into novel structural designs for future research and applications.

Heterogeneous bimetallic selenides encapsulated within graphene aerogel as advanced anodes for sodium ion batteries

Metal selenides are promising anode candidates for sodium ion batteries (SIBs) because of their high theoretical capacity, low cost, and environmental friendship. However, the low rate capability at high current density due to its inherent low electrical conductivity and poor cycle stability caused by inevitable volume variations during cycling frustrate its practical applications. Herein, we have developed a simple metallic-organic frameworks (MOFs)-derived selenide strategy to synthesize a series of heterogeneous bimetallic selenides encapsulated within graphene aerogels (GA) as anodes for SIBs. The bimetallic selenides/GA composites have unique structural characteristics that can shorten the migration path for Na+/electrons and accommodate the volume variations via additional void space during cycling. The built-in electric fields induced at the heterointerfaces can greatly reduce the activation energy for rapid charge transfer kinetics and promote the diffusion of Na+/electrons. GA is also beneficial for accommodating the volume variations during cycling and improving conductivity. As an advanced anode for SIBs, the MoSe2-Cu1.82Se@GA with a special porous octahedron can deliver the highest capacity of 444.8 mAh/g at a high rate of 1 A/g even after 1000 cycles among the bimetallic selenides/GA composites.

Metal-Organic Framework-Based Materials for Advanced Sodium Storage: Development and Anticipation

As a pioneering battery technology, even though sodium-ion batteries (SIBs) are safe, non-flammable, and capable of exhibiting better temperature endurance performance than lithium-ion batteries (LIBs), because of lower energy density and larger ionic size, they are not amicable for large-scale applications. Generally, the electrochemical storage performance of a secondary battery can be improved by monitoring the composition and morphology of electrode materials. Because more is the intricacy of a nanostructured composite electrode material, more electrochemical storage applications would be expected. Despite the conventional methods suitable for practical production, the synthesis of metal-organic frameworks (MOFs) would offer enormous opportunities for next-generation battery applications by delicately systematizing the structure and composition at the molecular level to store sodium ions with larger sizes compared with lithium ions. Here, the review comprehensively discusses the progress of nanostructured MOFs and their derivatives applied as negative and positive electrode materials for effective sodium storage in SIBs. The commercialization goal has prompted the development of MOFs and their derivatives as electrode materials, before which the synthesis and mechanism for MOF-based SIB electrodes with improved sodium storage performance are systematically discussed. Finally, the existing challenges, possible perspectives, and future opportunities will be anticipated.

Engineering Heterostructured Fe-Co-P Arrays for Robust Sodium Storage

Transition metal phosphides attract extensive concerns thanks to their high theoretical capacity in sodium ion batteries (SIBs). Nevertheless, the substantial volume fluctuation of metal phosphides during cycling leads to severe capacity decay, which largely hinders their large-scale deployment. In this regard, heterostructured Fe-Co-P (FeP/Co2P) arrays are firstly constructed in this work for SIBs. The novel self-supported construction without insulated binders favors fast charge migration and Na+ ion diffusion. In addition, the special heterostructure with abundant heterointerfaces could considerably mitigate the volume change during (de)sodiation and provide increased active sites for Na+ ions. Density functional theoretical (DFT) calculations confirm the built-in electric field in the heterointerfaces, which greatly hastens charge transfer and Na+ ion transportation, thereafter bringing about enhanced electrochemical performance. Most importantly, the FeP/Co2P heterostructure discloses higher electrical conductivity than that of bare FeP and Co2P based on the theoretical calculations. As anticipated, the heterostructured Fe-Co-P arrays demonstrate superior performance to that of Fe-P or Co-P anode, delivering high reversible capacities of 634 mAh g-1 at 0.2 A g-1 and 239 mAh g-1 at 1 A g-1 after 300 cycles.

An oriented tube array porous carbon anode prepared using a self-blowing mold of salt templates for high-rate potassium storage

Porous carbon materials with oriented porosity are very useful in ion batteries, but their high cost and complex fabrication hinder their wide application. In this paper, we used cheap and water-soluble NaHCO3 grains to prepare unique porous carbon with an orderly arranged tube array via one-step carbonization. During the preparation process, a novel self-blowing mold of salt templates was discovered for the first time, and the resulting numerous high-speed gas jets can act as gas state templates to induce the formation of the oriented porous carbon into a mesoscale tube array with rich micropores. Besides, the amount of CO functional groups has been enhanced greatly by the chemical activation of H2O and CO2 derived from the decomposition of NaHCO3, which can improve the reversible specific capacity of the electrode by forming a C-O-K compound with potassium. Thanks to the coupling effect of the hierarchical porous structure with an orderly tube array and rich CO functional groups, the obtained porous carbon materials exhibited excellent kinetics and impressive rate capability as the anode of potassium-ion batteries (PIBs) with high capacities of 209 mA h g-1 at 10 A g-1 and 156 mA h g-1 at 30 A g-1. This work not only provides a facile, green, sustainable approach to fabricating novel carbon materials, but also demonstrates the promising prospect of oriented porous carbon in exploring advanced electrode materials for PIBs.

Elastic MXene conductive layers and electrolyte engineering enable robust potassium storage

The precisely engineered structures of materials greatly influence the manifestation of their properties. For example, in the process of alkali metal ion storage, a carefully designed structure capable of accommodating inserted and extracted ions will improve the stability of material cycling. The present study explores the uniform distribution of self-grown carbon nanotubes to provide structural support for the conductive and elastic MXene layers of Ti3C2Tx-Co@NCNTs. Furthermore, a compatible electrolyte system has been optimized by analyzing the solvation structure and carefully regulating the component in the solid electrolyte interphase (SEI) layer. Mechanistic studies demonstrate that the decomposition predominantly controlled by FSI- leads to the formation of a robust inorganic SEI layer enriched with KF, thus effectively inhibiting irreversible side reactions and major structural deterioration. Confirming our expectations, Ti3C2Tx-Co@NCNTs exhibits an impressive reversible capacity of 260 mA h g-1, even after 2000 cycles at 500 mA g-1 in 1 M KFSI (DME), surpassing most MXene-based anodes reported for PIBs. Additionally, density functional theory (DFT) calculations verify the superior electronic conductivity and lower K+ diffusion energy barriers of the novel superstructure of Ti3C2Tx-Co@NCNTs, thereby affirming the improved electrochemical kinetics. This study presents systematic evaluation methodologies for future research on MXene-based anodes in PIBs.

Flexible Self-Supporting MOF-Based Bean Pod Cube Hollow Nanofibers for Ultralong Cycling and High Rate Na Storage

Sodium-ion batteries (SIBs) have garnered significant attention due to their potential as an emerging energy storage solution. Tin sulfide (SnS) has emerged as a promising anode material for SIBs due to its impressive theoretical specific capacity of 1022 mA h g-1 and excellent electrical conductivity. However, its practical application has been hindered by issues such as large volume expansion, which adversely affects cycling stability and rate performance during the charge/discharge processes. In this study, a novel approach to address these issues by synthesizing the bean pod cube hollow metal-organic framework (MOF)-SnSx/NC@N-doped carbon nanofibers through a process involving electrospinning, PDA coating, and calcination. The Sn-MOF serves as a self-sacrificing template, facilitating the simultaneous dissociation of MOF and polymerization of dopamine, leading to the creation of hollow intermediates that retain tin components. Subsequent sulfidation results in the integration of the hollow MOF-SnSx/NC nanoparticles within 3D nitrogen-doped carbon nanofibers, forming the distinctive bean pod cube composite structure. This unique configuration effectively shortens the diffusion path and mitigates volume expansion for sodium ions, ultimately yielding an exceptional high rate performance of 130 mA h g-1 (10 A g-1) and an ultralong cycling performance of 328 mA h g-1 even after 3500 cycles (2 A g-1) as the anode for SIBs.

1D Insertion Chains Induced Small-Polaron Collapse in MoS2 2D Layers Toward Fast-Charging Sodium-Ion Batteries

Molybdenum disulfide (MoS2 ) with high theoretical capacity is viewed as a promising anode for sodium-ion batteries but suffers from inferior rate capability owing to the polaron-induced slow charge transfer. Herein, a polaron collapse strategy induced by electron-rich insertions is proposed to effectively solve the above issue. Specifically, 1D [MoS] chains are inserted into MoS2 to break the symmetry states of 2D layers and induce small-polaron collapse to gain fast charge transfer so that the as-obtained thermodynamically stable Mo2 S3 shows metallic behavior with 107 times larger electrical conductivity than that of MoS2 . Theoretical calculations demonstrate that Mo2 S3 owns highly delocalized anions, which substantially reduce the interactions of Na-S to efficiently accelerate Na+ diffusion, endowing Mo2 S3 lower energy barrier (0.38 vs 0.65 eV of MoS2 ). The novel Mo2 S3 anode exhibits a high capacity of 510 mAh g-1 at 0.5 C and a superior high-rate stability of 217 mAh g-1 at 40 C over 15 000 cycles. Further in situ and ex situ characterizations reveal the in-depth reversible redox chemistry in Mo2 S3 . The proposed polaron collapse strategy for intrinsically facilitating charge transfer can be conducive to electrode design for fast-charging batteries.

Ultrafast and ultrastable FeSe2embedded in nitrogen-doped carbon nanofibers anode for sodium-ion half/full batteries

Transition metal selenides are considered as promising anode materials for fast-charging sodium-ion batteries due to their high theoretical specific capacity. However, the low intrinsic conductivity, particle aggregation, and large volume expansion problems can severely inhibit the high-rate and long-cycle performance of the electrode. Herein, FeSe2nanoparticles embedded in nitrogen-doped carbon nanofibers (FeSe2@NCF) have been synthesized using the electrospinning and selenization process, which can alleviate the volume expansion and particle aggregation during the sodiation/desodiation and improve the electrical conductivity of the electrode. The FeSe2@NCF electrode delivers the outstanding specific capacity of 222.3 mAh g-1at a fast current density of 50 A g-1and 262.1 mAh g-1at 10 A g-1with the 87.8% capacity retention after 5000 cycles. Furthermore, the Na-ion full cells assembled with pre-sodiated FeSe2@NCF as anode and Na3V2(PO4)3/C as cathode exhibit the reversible specific capacity of 117.6 mAh g-1at 5 A g-1with the 84.3% capacity retention after 1000 cycles. This work provides a promising way for the conversion-based metal selenides for the applications as fast-charging sodium-ion battery anode.

Unveiling the Nature of Superior Sodium Storage in the CoSe2/rGO Nanocomposite

Sodium-ion batteries (SIBs) are considered the most promising alternatives to lithium-ion batteries (LIBs) due to the abundant availability of sodium and their cost-effectiveness. Transition metal selenides (TMSes) are considered promising anodes for SIBs due to their economic efficiency and high theoretical capacity. Nevertheless, overcoming the challenges of sluggish reaction kinetics and severe structural damage is crucial to improving cycle life and rate capability. Herein, a simple microwave hydrothermal process was used to synthesize a nanocomposite of CoSe2 nanoparticles uniformly anchored on reduced graphene oxide nanosheets (CoSe2/rGO). The influences of rGO on the structure and electrochemical performance and Na+ diffusion kinetics are investigated through a series of characterization and electrochemical tests. The resulting CoSe2/rGO nanocomposite exhibits a remarkable initial specific capacity of 544 mAh g-1 at 0.5 A g-1, impressive rate capability (368 mAh g-1 at 20 A g-1), and excellent cycle life and maintains 348 mAh g-1 at 5 A g-1 over 1200 cycles. In addition, the in situ electrochemical impedance spectroscopy (EIS), ex situ X-ray diffraction (XRD), and transmission electron microscopy (TEM) tests are selected to further investigate the sodium storage mechanism.

Bismuth Vanadate and 3D Graphene Composite Photoanodes for Enhanced Photoelectrochemical Oxidation of Water

Bismuth vanadate (BiVO4) has been one of the most promising photoanodes for the photoelectrochemical (PEC) water oxidation process. Efforts are still on to overcome the drawbacks of this photoanode to enhance the catalytic efficiency and improve the stability. In the present work, three-dimensional graphene (3D-G) was incorporated inside the BiVO4 matrix, primarily to improve the conductivity of the material. The photoanodes are fabricated with the incorporation of a SnO2 heterojunction and application of cobalt borate (Co-Bi) as a cocatalyst. The incorporation of 3D-G has enhanced the photocurrent from 0.72 o 1.21 mA cm-2 in ITO/SnO2/BiVO4 and ITO/SnO2/3D-G-BiVO4 materials; the photocurrent has been improved from 0.89 to 1.52 mA cm-2 in ITO/SnO2/BiVO4/Co-Bi and ITO/SnO2/3D-G-BiVO4. Semiconductor properties are evaluated from the Mott-Schottky measurements, and the charge transfer and transport kinetics of the PEC process are measured from several photoelectrochemical investigations. Both the charge transport and the charge transfer efficiencies are enhanced upon inclusion of 3D-G into the catalyst system. The lifetime of the charge carrier is observed to be increased. The decrease in the decay kinetics of the holes, enhancement in the open-circuit photovoltage (OCPV), and the resulting modulation of the surface states are responsible for the enhancement in the surface charge transfer process due to the inclusion of 3D-G into the catalytic system. Therefore, the additional role of 3D-G in the modulation of the surface states and release of the Fermi level pinning has made the band alignment between the semiconductor and the analyte better, which resulted in enhanced catalytic performance in the photoelectrochemical oxidation of water.

Hollow porous carbon nanospheres containing polar cobalt sulfide (Co9S8) nanocrystals as electrocatalytic interlayers for the reutilization of polysulfide in lithium-sulfur batteries

HYPOTHESIS

The introduction of functional interlayers for efficient anchoring of lithium polysulfides has received significant attention worldwide.

EXPERIMENTS

A facile wet-chemical method was adopted to obtain hollow porous carbon nanospheres (HPCNSs) impregnated with metallic and polar cobalt sulfide (Co₉S₈) nanocrystals (abbreviated as "Co₉S₈@HPCNS"). The prepared nanocrystals were employed as electrocatalytic interlayers via separator coating for the efficient capture and reutilization of polysulfide species in Li-S batteries. The HPCNSs were synthesized via the polymerization method followed by carbonization and template removal. The Co₉S₈ nanocrystals were impregnated inside the HPCNSs, followed by heat treatment in a reducing atmosphere.

FINDINGS

The porous structure of the CNS enables the efficient percolation of the electrolyte, in addition to accommodating unwanted volume fluctuations during redox processes. Furthermore, the metallic Co₉S₈ nanocrystals improve the electronic conductivity and enhance the polarity of the CNS towards the polysulfide. Correspondingly, the Li-S cells featuring Co₉S₈@HPCNS as electrocatalytic interlayers and regular sulfur (S) electrodes display improved electrochemical performance such as reasonable rate performance and prolonged cycling stability at different current rates (0.1, 0.5, and 1.0 C). Therefore, we anticipate that the rational design strategy proposed herein will provide significant insights into the synthesis of advanced materials for various energy storage applications.

Metal Selenides Anode Materials for Sodium Ion Batteries: Synthesis, Modification, and Application

The powerful and rapid development of lithium-ion batteries (LIBs) in secondary batteries field makes lithium resources in short supply, leading to rising battery costs. Under the circumstances, sodium-ion batteries (SIBs) with low cost, inexhaustible sodium reserves, and analogous work principle to LIBs, have evolved as one of the most anticipated candidates for large-scale energy storage devices. Thereinto, the applicable electrode is a core element for the smooth development of SIBs. Among various anode materials, metal selenides (MSe_x ) with relatively high theoretical capacity and unique structures have aroused extensive interest. Regrettably, MSe_x suffers from large volume expansion and unwished side reactions, which result in poor electrochemistry performance. Thus, strategies such as carbon modification, structural design, voltage control as well as electrolyte and binder optimization are adopted to alleviate these issues. In this review, the synthesis methods and main reaction mechanisms of MSe_x are systematically summarized. Meanwhile, the major challenges of MSe_x and the corresponding available strategies are proposed. Furthermore, the recent research progress on layered and nonlayered MSe_x for application in SIBs is presented and discussed in detail. Finally, the future development focuses of MSe_x in the field of rechargeable ion batteries are highlighted.