Protein interactions at solid surfaces

Mechanically Robust, Superlubricating and Antifouling Bilayer Nanocoating for Micro-Bioimplants via a Dual-Function Metal Coordination Approach

Nanometer-thick ultrathin coatings with superior mechanical strength and desirable lubricating and antifouling performance are critical for the miniaturization of implantable medical devices. However, integrating these properties at the nanoscale remains challenging due to the inherent trade-off between mechanical strength and hydration as well as limitations in coating thickness. In this work, we address these challenges by employing dual-function metal coordination to construct a ∼25 nm thick bilayer structure. Contact mechanics and interfacial molecular force measurements confirm the dual role of vanadium (VIII) ions in forming this bilayer: VIII ions bridge the ligand sites to reinforce the protein bottom layer, and simultaneously anchor the end blocks of the designed ABA triblock hydrophilic polymers to form a hydrated, looping top layer. This VIII-enabled structure demonstrates remarkable load-bearing capacity and lubricating performance (i.e., friction coefficient μ on the order of 10-3 over 100 cycles under ∼10 MPa), while it also exhibits excellent resistance to biofouling in complex biological fluids. This work presents a useful strategy for integrating seemingly incompatible properties into ultrathin coatings, offering the potential for customizing multifunctional surfaces for micro-devices/machines toward bioengineering applications.

An experimental and modeling approach to describe the deactivation of cellulases at the air-liquid interface

Understanding the reaction mechanisms involved in the enzymatic hydrolysis of cellulose is important because it is kinetically the most limiting step of the bioethanol production process. The present work focuses on the enzymatic deactivation at the air-liquid interface, which is one of the aspects contributing to this global deactivation. This phenomenon has already been experimentally proven, but this is the first time that a model has been proposed to describe it. Experiments were performed by incubating Celluclast cocktail solutions on an orbital stirring system at different enzyme concentrations and different surface-to-volume ratios. A 5-day follow-up was carried out by measuring the global FPase activity of cellulases for each condition tested. The activity loss was proven to depend on both the air-liquid surface area and the enzyme concentration. Both observations suggest that the loss of activity takes place at the air-liquid surface, the total amount of enzymes varying with volume or enzyme concentration. Furthermore, tests performed using five individual enzymes purified from a Trichoderma reesei cocktail showed that the only cellulase that is deactivated at the air-liquid interface is cellobiohydrolase II. From the experimental data collected by varying the initial enzyme concentration and the ratio surface to volume, it was possible to develop, for the first time, a model that describes the loss of activity at the air-liquid interface for this configuration.

Aggregation kinetics and stability of biodegradable nanoplastics in aquatic environments: Effects of UV-weathering and proteins

Plastic pollution caused by conventional plastics has promoted the development and use of biodegradable plastics. However, biodegradable plastics do not degrade readily in water; instead, they can generate micro- and nanoplastics. Compared to microplastics, nanoplastics are more likely to cause negative impacts to the aquatic environment due to their smaller size. The impacts of biodegradable nanoplastics highly depend on their aggregation behavior and colloidal stability, which still remain unknown. Here, we studied the aggregation kinetics of biodegradable nanoplastics made of polybutylene adipate co-terephthalate (PBAT) in NaCl and CaCl₂ solutions as well as in natural waters before and after weathering. We further studied the effect of proteins on aggregation kinetics with both negative-charged bovine serum albumin (BSA) and positive-charged lysozyme (LSZ). For pristine PBAT nanoplastics (before weathering), Ca^2＋ destabilized nanoplastic suspensions more aggressively than Na⁺, with the critical coagulation concentration being 20 mM in CaCl₂ vs 325 mM in NaCl. Both BSA and LSZ promoted the aggregation of pristine PBAT nanoplastics, and LSZ showed a more pronounced effect. However, no aggregation was observed for weathered PBAT nanoplastics under most experimental conditions. Further stability tests demonstrated that pristine PBAT nanoplastics aggregated substantially in seawater, but not in freshwater, and only slightly in soil pore water; while weathered PBAT nanoplastics remained stable in all natural waters. These results suggest that biodegradable nanoplastics, especially weathered biodegradable nanoplastics, are highly stable in the aquatic environment, even in the marine environment.

Effect of decoration route on the nanomechanical, adhesive, and force response of nanocelluloses-An in situ force spectroscopy study

Although cellulose derivatives are widely applied in high-tech materials, the relation between their force responses and their surface chemical properties in a biological environment as a function of pH is unknown. Here, interaction forces of surface modified cellulose nanocrystals (CNCs), lignin residual cellulose nanocrystals (LCNCs), and 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized cellulose nanofibres (TCNFs) with OSO3-, COO- and lignin chemical groups were measured using in situ peak force quantitative nanomechanical mapping and force spectroscopy in salt solution at two pH values. We found that the forces acting between the tip and CNC or LCNC are steric dominated showing long range and slow decay as a result of their low surface charge density. High Mw lignin contributed to the increased repulsion range for LCNCs compared to CNCs. The repulsion measured for TCNFs at the very short range was electrostatic force dominating showing a steep decay attributed to its high surface charge density. In the case of TCNFs, electrostatic double layer force was also evidenced by the attraction measured at secondary minima. In all the three cases the electro steric interactions are pH dependent. Dissipation maps verified that the force behavior for each material was related to structural conformation restriction of the groups at compression. The slow decayed repulsion of CNCs or LCNCs is related to a weak restriction of conformational change due to small surface groups or high molecular weight bound polymers forming flat layers, whereas the steep repulsion of TCNFs is attributed to a strong conformation restriction of carboxylic groups occurred by forming extended structure. Our results suggest that the force responses of the materials were dominated by surface charges and structural differences. TCNFs showed superior nanomechanical and repulsion properties over CNCs or LCNCs at neutral pH.

Reactive Oxygen Species Formed by Metal and Metal Oxide Nanoparticles in Physiological Media—A Review of Reactions of Importance to Nanotoxicity and Proposal for Categorization

Diffusely dispersed metal and metal oxide nanoparticles (NPs) can adversely affect living organisms through various mechanisms and exposure routes. One mechanism behind their toxic potency is their ability to generate reactive oxygen species (ROS) directly or indirectly to an extent that depends on the dose, metal speciation, and exposure route. This review provides an overview of the mechanisms of ROS formation associated with metal and metal oxide NPs and proposes a possible way forward for their future categorization. Metal and metal oxide NPs can form ROS via processes related to corrosion, photochemistry, and surface defects, as well as via Fenton, Fenton-like, and Haber–Weiss reactions. Regular ligands such as biomolecules can interact with metallic NP surfaces and influence their properties and thus their capabilities of generating ROS by changing characteristics such as surface charge, surface composition, dissolution behavior, and colloidal stability. Interactions between metallic NPs and cells and their organelles can indirectly induce ROS formation via different biological responses. H₂O₂ can also be generated by a cell due to inflammation, induced by interactions with metallic NPs or released metal species that can initiate Fenton(-like) and Haber–Weiss reactions forming various radicals. This review discusses these different pathways and, in addition, nano-specific aspects such as shifts in the band gaps of metal oxides and how these shifts at biologically relevant energies (similar to activation energies of biological reactions) can be linked to ROS production and indicate which radical species forms. The influences of kinetic aspects, interactions with biomolecules, solution chemistry (e.g., Cl⁻ and pH), and NP characteristics (e.g., size and surface defects) on ROS mechanisms and formation are discussed. Categorization via four tiers is suggested as a way forward to group metal and metal oxide NPs based on the ROS reaction pathways that they may undergo, an approach that does not include kinetics or environmental variations. The criteria for the four tiers are based on the ability of the metallic NPs to induce Fenton(-like) and Haber–Weiss reactions, corrode, and interact with biomolecules and their surface catalytic properties. The importance of considering kinetic data to improve the proposed categorization is highlighted.

Adsorption of Horseradish Peroxidase on Metallic Nanoparticles: Effects on Reactive Oxygen Species Detection Using 2',7'-Dichlorofluorescin Diacetate

The fluorescent probe 2',7'-dichlorofluorescein diacetate (DCFH-DA) together with the enzyme horseradish peroxidase (HRP) is widely used in nanotoxicology to study acellular reactive oxygen species (ROS) production from nanoparticles (NPs). This study examined whether HRP adsorbs onto NPs of Mn, Ni, and Cu and if this surface process influences the extent of metal release and hence the ROS production measurements using the DCFH assay in phosphate buffered saline (PBS), saline, or Dulbecco's modified Eagle's medium (DMEM). Adsorption of HRP was evident onto all NPs and conditions, except for Mn NPs in PBS. The presence of HRP resulted in an increased release of copper from the Cu NPs in PBS and reduced levels of nickel from the Ni NPs in saline. Both metal ions in solution and the adsorption of HRP onto the NPs can change the activity of HRP and thus influence the ROS results. The effect of HRP on the NP reactivity was shown to be solution chemistry dependent. Most notable was the evident affinity/adsorption of phosphate toward the metal NPs, followed by a reduced adsorption of HRP, the concomitant reduction in released manganese from the Mn NPs, and increased levels of released metals from the Cu NPs in PBS. Minor effects were observed for the Ni NPs. The solution pH should be monitored since the release of metals can change the solution pH and the activity of HRP is known to be pH-dependent. It is furthermore essential that solution pH adjustments are made following the addition of NaOH during diacetyl removal of DCFH-DA. Even though not observed for the given exposure conditions of this study, released metal ions could possibly induce agglomeration or partial denaturation of HRP, which in turn could result in steric hindrance for H2O2 to reach the active site of HRP. This study further emphasizes the influence of HRP on the background kinetics, its solution dependence, and effects on measured ROS signals. Different ways of correcting for the background are highlighted, as this can result in different interpretations of generated results. The results show that adsorption of HRP onto the metal NPs influenced the extent of metal release and may, depending on the investigated system, result in either under- or overestimated ROS signals if used together with the DCFH assay. HRP should hence be used with caution when measuring ROS in the presence of reactive metallic NPs.

How the dynamics of subsurface hydration regulates protein-surface interactions

The role of water structure near surfaces has been scrutinized extensively because it is accepted to control protein-surface interactions, however, often avoiding effects of hydration dynamics. Relating to this, we have recently discussed how the amount and state of water, accumulated within various hydrophobic-to-hydrophilic subsurface gradients of plasma polymer films, influence the magnitude of adsorbed bovine serum albumin, spurring the hypothesis of the presence of a subsurface dipolar field. This study now analyzes the kinetics of hydration by systematically introducing modified gradient architectures and relating different hydration times to the adsorption of a dipolar probing protein. We find that dry-stored subsurface gradients, owing nominally identical surface characteristics, exhibits comparable surface potential and protein adsorption values, while they behave in a different manner at transient hydration times of few hours, before reaching near-equilibrium state of the hydration. A characteristic hydration time is found where protein adsorption on gradient films is minimal, unveiling the transient nature of the effect. In general, protein adsorption is sensitive to the time allowed for hydration of the adsorbent surface, supporting our initial hypothesis inasmuch as the quantity as well as quality of water inside the subsurface matrix is crucial for controlling protein-surface interactions.

Redox/pH dual stimuli-responsive ZnO QDs-gated mesoporous silica nanoparticles as carriers in cancer therapy

New drug delivery system (ZnO@CMS) of the redox and pH dual-stimuli responsive based on colloidal mesoporous silica nanoparticles (CMS) has been designed, in which zinc oxide quantum dots (ZnO QDs) as a capping agent was conjugated on the surface of nanoparticles by amide bonds. The release behaviour of doxorubicin (DOX) as the model drug from ZnO@CMS (ZnO@CMS-DOX) indicated the redox and pH dual-stimuli responsive properties due to the acidic dissolution of ZnO QDs and cleavage of the disulphide bonds. The haemolysis and bovine serum albumin adsorption assays showed that the modification of ZnO QDs on the mesoporous silica nanoparticles modified by mercapto groups (CMS-SH)(ZnO@CMS) had better biocompatibility compared to CMS-SH. The cell viability and cellular uptake tests revealed that the ZnO@CMS might achieve the antitumour effect on cancer cells due to the cytotoxicity of ZnO QDs. Therefore, ZnO@CMS might be potential nanocarriers of the drug delivery system in cancer therapy. The in vivo evaluation of ZnO@CMS would be carried out in future work.

Influence of Biocorona Formation on the Transformation and Dissolution of Cobalt Nanoparticles under Physiological Conditions

Cobalt (Co) nanoparticles (NPs) are produced in different applications and unintentionally generated at several occupational and traffic settings. Their diffuse dispersion may lead to interactions with humans and aquatic organisms via different exposure routes that include their transformation/dissolution in biological media. This paper has investigated the particle stability and reactivity of Co NPs (dispersed by sonication prior to exposure) interacting with selected individual biomolecules (amino acids, polypeptides, and proteins) in phosphate-buffered saline (PBS). No or minor adsorption of amino acids (glutamine, glutamic acid, lysine, and cysteine) was observed on the Co NPs, independent of the functional group and charge. Instead, phosphate adsorption resulted in the formation of a surface layer (a corona) of Co phosphate. The adsorption of larger biomolecules (polyglutamic acid, polylysine, lysozyme, and mucin) was evident in parallel with the formation of Co phosphate. The dissolution of the Co NPs was rapid as 35-55% of the particle mass was dissolved within the first hour of exposure. The larger biomolecules suppressed the dissolution initially compared to exposure in PBS only, whereas the dissolution was essentially unaffected by the presence of amino acids, with cysteine as an exception. The formation of Co phosphate on the NP surface reduced the protective properties of the surface oxide of the Co NPs, as seen from the increased levels of the released Co when compared with the nonphosphate-containing saline. The results underline the diversity of possible outcomes with respect to surface characteristics and dissolution of Co NPs in biological media and emphasize the importance of surface interactions with phosphate on the NP characteristics and reactivity.

Isothermal titration calorimetry as a complementary method for investigating nanoparticle-protein interactions

Isothermal titration calorimetry (ITC) is a complementary technique that can be used for investigations of protein adsorption on nanomaterials, as it quantifies the thermodynamic parameters of intermolecular interactions in situ. As soon as nanomaterials enter biological media, a corona of proteins forms around the nanomaterials, which influences the surface properties and therefore the behavior of nanomaterials tremendously. ITC enhances our understanding of nanoparticle-protein interactions, as it provides information on binding affinity (in form of association constant K_a), interaction mechanism (in form of binding enthalpy ΔH, binding entropy ΔS and Gibbs free energy ΔG) and binding stoichiometry n. Therefore, as a complementary method, ITC enhances our mechanistic understanding of the protein corona. In this minireview, the information obtained from a multitude of ITC studies regarding different nanomaterials and proteins are gathered and relations between nanomaterials' properties and their resulting interactions undergone with proteins are deduced. Nanomaterials formed of a hydrophilic material without strongly charged surface and steric stabilization experience the weakest interactions with proteins. As a result, such nanomaterials undergo the least unspecific protein-interactions and are most promising for allowing an engineering of the protein corona.

Hard-wall entropic effect accelerates detachment of adsorbed polymer chains

Many previous studies of unbinding kinetics have focused on a two-state model, with fully bonded and free states, which may not extend to more complicated biopolymer dynamics involving other reactions. Here we address the kinetic rate of this process at the segment level, as it is influenced by a growing dangling end of the chain. We use the mean first-passage time approach and treat the polymer as a chain attached to a wall through a succession of spring potentials, with two distinct regions of bonded and free segments. The interaction between the wall and free-moving chain end adds an entropic repulsion to this process. We estimate the average monomer detachment rate K as a function of the free dangling length L. For a flexible polymer, we find an acceleration factor in the average detachment rate depending on L and the details of the spring bond; when L is long, this factor is a simple ratio of its breaking distance to the natural bond length. For a semiflexible filament, we examine the regime where L is shorter than persistence length L_{p}, as the limit opposite to that of the flexible chain. An enhancing factor also appears, speeding up the filament unbinding when the free length grows; for a long rigid rod, this factor becomes two, independently of the bond details. We also examine the total unbinding time of an irreversible detaching process by integrating (1/K) over polymer length and discover that its power-law scaling with chain length is smaller than one, over the commonly seen range of polymer size.

Deactivation of Cellulase at the Air-Liquid Interface Is the Main Cause of Incomplete Cellulose Conversion at Low Enzyme Loadings

Amphiphilic additives such as bovine serum albumin (BSA) and Tween have been used to improve cellulose hydrolysis by cellulases. However, there has been a lack of clarity to explain their mechanism of action in enzymatic hydrolysis of pure or low-lignin cellulosic substrates. In this work, a commercial Trichoderma reesei enzyme preparation and the amphiphilic additives BSA and Tween 20 were applied for hydrolysis of pure Avicel cellulose. The results showed that these additives only had large effects on cellulose conversion at low enzyme to substrate ratios when the reaction flasks were shaken. Furthermore, changes in the air-liquid interfacial area profoundly affected cellulose conversion, but surfactants reduced or prevented cellulase deactivation at the air-liquid interface. Not shaking the flasks or adding low amounts of surfactant resulted in near theoretical cellulose conversion at low enzyme loadings given enough reaction time. At low enzyme loadings, hydrolysis of cellulose in lignocellulosic biomass with low lignin content suffered from enhanced enzyme deactivation at the air-liquid interface.

Structural and Mechanical Properties of Thin Films of Bovine Submaxillary Mucin versus Porcine Gastric Mucin on a Hydrophobic Surface in Aqueous Solutions

The structural and mechanical properties of thin films generated from two types of mucins, namely, bovine submaxillary mucin (BSM) and porcine gastric mucin (PGM) in aqueous environment were investigated with several bulk and surface analytical techniques. Both mucins generated hydrated films on hydrophobic polydimethylsiloxane (PDMS) surfaces from spontaneous adsorption arising from their amphiphilic characteristic. However, BSM formed more elastic films than PGM at neutral pH condition. This structural difference was manifested from the initial film formation processes to the responses to shear stresses applied to the films. Acidification of environmental pH led to strengthening the elastic character of BSM films with increased adsorbed mass, whereas an opposite trend was observed for PGM films. We propose that this contrast originates from that negatively charged motifs are present for both the central and terminal regions of BSM molecule, whereas a similar magnitude of negative charges is localized at the termini of PGM molecule. Given that hydrophobic motifs acting as an anchor are also localized in the terminal region, electrostatic repulsion between anchoring units of PGM molecules on a nonpolar PDMS surface leads to weakening of the mechanical integrity of the films.

Nanoparticle colloidal stability in cell culture media and impact on cellular interactions

Nanomaterials are finding increasing use for biomedical applications such as imaging, diagnostics, and drug delivery. While it is well understood that nanoparticle (NP) physico-chemical properties can dictate biological responses and interactions, it has been difficult to outline a unifying framework to directly link NP properties to expected in vitro and in vivo outcomes. When introduced to complex biological media containing electrolytes, proteins, lipids, etc., nanoparticles (NPs) are subjected to a range of forces which determine their behavior in this environment. One aspect of NP behavior in biological systems that is often understated or overlooked is aggregation. NP aggregation will significantly alter in vitro behavior (dosimetry, NP uptake, cytotoxicity), as well as in vivo fate (pharmacokinetics, toxicity, biodistribution). Thus, understanding the factors driving NP colloidal stability and aggregation is paramount. Furthermore, studying biological interactions with NPs at the nanoscale level requires an interdisciplinary effort with a robust understanding of multiple characterization techniques. This review examines the factors that determine NP colloidal stability, the various efforts to stabilize NP in biological media, the methods to characterize NP colloidal stability in situ, and provides a discussion regarding NP interactions with cells.

Beads-free protein immunoprecipitation for a mass spectrometry-based interactome and posttranslational modifications analysis

BACKGROUND

Protein immunoprecipitation (IP) coupled with MS provides means to interrogate protein complexes and their posttranslational modifications (PTMs). In a typical protein IP assay antibodies are conjugated to protein A/G beads requiring large amounts of antibodies, tube transfers and centrifugations.

RESULTS

As an alternative, we present Matrix-IP, beads-free microplate-based platform with surface-immobilized antibodies. Assay utilizes standard 96-well polypropylene PCR plates that are laboratory-fabricated with UV-C light and then protein A/G coated prior to IP reaction. We demonstrate application of Matrix-IP platform in MS analysis of heterogeneous nuclear ribonucleoprotein K (hnRNP K) interactome and PTMs.

CONCLUSION

Matrix-IP is time-saving, easy to use high throughput method adaptable for low sample amounts and automation.

Capturing Conformation-Dependent Molecule-Surface Interactions When Surface Chemistry Is Heterogeneous

Molecular building blocks, such as carbon nanotubes and DNA origami, can be fully integrated into electronic and optical devices if they can be assembled on solid surfaces using biomolecular interactions. However, the conformation and functionality of biomolecules depend strongly on the local chemical environment, which is highly heterogeneous near a surface. To help realize the potential of biomolecular self-assembly, we introduce here a technique to spatially map molecular conformations and adsorption, based on single-molecule fluorescence microscopy. On a deliberately patterned surface, with regions of varying hydrophobicity, we characterized the conformations of adsorbed helicogenic alanine-lysine copeptides using Förster resonance energy transfer. The peptides adopted helical conformations on hydrophilic regions of the surface more often than on hydrophobic regions, consistent with previous ensemble-averaged observations of α-helix surface stability. Interestingly, this dependence on surface chemistry was not due to surface-induced unfolding, as the apparent folding and unfolding dynamics were usually much slower than desorption. The most significant effect of surface chemistry was on the adsorption rate of molecules as a function of their initial conformational state. In particular, regions with higher adsorption rates attracted more molecules in compact, disordered coil states, and this difference in adsorption rates dominated the average conformation of the ensemble. The correlation between adsorption rate and average conformation was also observed on nominally uniform surfaces. Spatial variations in the functional state of adsorbed molecules would strongly affect the success rates of surface-based molecular assembly and can be fully understood using the approach developed in this work.

Colloid-probe AFM studies of the interaction forces of proteins adsorbed on colloidal crystals

In recent years, colloid-probe AFM has been used to measure the direct interaction forces between colloidal particles of different size or surface functionality in aqueous media, as one can study different forces in symmerical systems (i.e., sphere-sphere geometry). The present study investigates the interaction between protein coatings on colloid probes and hydrophilic surfaces decorated with hexagonally close packed single particle layers that are either uncoated or coated with proteins. Controlled solvent evaporation from aqueous suspensions of colloidal particles (coated with or without lysozyme and albumin) produces single layers of close-packed colloidal crystals over large areas on a solid support. The measurements have been carried out in an aqueous medium at different salt concentrations and pH values. The results show changes in the interaction forces as the surface charge of the unmodified or modified particles, and ionic strength or pH of the solution is altered. At high ionic strength or pH, electrostatic interactions are screened, and a strong repulsive force at short separation below 5 nm dominates, suggesting structural changes in the absorbed protein layer on the particles. We also study the force of adhesion, which decreases with an increment in the salt concentration, and the interaction between two different proteins indicating a repulsive interaction on approach and adhesion on retraction.

Protein binding for detection of small changes on a nanoparticle surface

Protein adsorption on nanoparticles is closely associated with the physicochemical properties of particles, in particular, their surface properties. We synthesized two batches of polyacrylic acid-coated nanoparticles under almost identical conditions except for the heating duration and found differences in the head-group structure of the polyacrylic acid. The structure change was confirmed by NMR and MS. The two batches of particles had varied binding affinities to a selected group of proteins. Computational work confirmed that the head group of the polymer on the surface of a nanoparticle could directly interact with a protein, and small structural changes in the head group were sufficient to result in a significant difference in the free energy of binding. Our results demonstrate that protein adsorption is so sensitive to the surface properties of particles that it can reveal even small variations in the structure of a nanoparticle surface ligand, and should be useful for quick assessment of nanoparticle properties.

Adsorption of soft and hard proteins onto OTCEs under the influence of an external electric field

The adsorption behavior of hard and soft proteins under the effect of an external electric field was investigated by a combination of spectroscopic ellipsometry and molecular dynamics (MD) simulations. Optically transparent carbon electrodes (OTCE) were used as conductive, sorbent substrates. Lysozyme (LSZ) and ribonuclease A (RNase A) were selected as representative hard proteins, whereas myoglobin (Mb), α-lactalbumin (α-LAC), bovine serum albumin (BSA), glucose oxidase (GOx), and immunoglobulin G (IgG) were selected to represent soft proteins. In line with recent publications from our group, the experimental results revealed that while the adsorption of all investigated proteins can be enhanced by the potential applied to the electrode, the effect is more pronounced for hard proteins. In contrast with the incomplete monolayers formed at open-circuit potential, the application of +800 mV to the sorbent surface induced the formation of multiple layers of protein. These results suggest that this effect can be related to the intrinsic polarizability of the protein (induction of dipoles), the resulting surface accessible solvent area (SASA), and structural rearrangements induced upon the incorporation on the protein layer. The described experiments are critical to understand the relationship between the structure of proteins and their tendency to form (under electric stimulation) layers with thicknesses that greatly surpass those obtained at open-circuit conditions.

Redox-responsive mesoporous silica as carriers for controlled drug delivery: a comparative study based on silica and PEG gatekeepers

Hybrid mesoporous silica nanoparticles (MSNs) modified with polymer polyethylene glycol (PEG) through the biodegradable disulfide bonds were prepared to achieve 'on demand' drug release. In this system, PEG chains were chosen as the representative gatekeepers that can block drugs within the mesopores of MSNs. After the addition of glutathione (GSH), the gatekeepers were removed from the pore outlets of MSNs, followed by the release of encapsulated drugs. In this research, the effects of grafting density of gatekeepers on the drug release and biocompatibility of silica carriers were also investigated. First, PEG modified MSNs were prepared by the condensation reaction between the carboxyl groups of MSN and the hydroxyl of PEG. The structure of the resultant MSN-SS-PEG was characterized by transmission electron microscopy (TEM), nitrogen adsorption/desorption isotherms analysis and Fourier transform infrared spectroscopy (FTIR). Rhodamine B (RhB) as the model drug was loaded into MSNs. The in vitro assay results indicated that RhB was released rapidly after the addition of 10 mM GSH; M1-SS-PEG had the best capping efficiency compared with M0.5 and M1.5 groups. Moreover, hemolysis assay, serum protein adsorption and cell viability test indicated that with the increase of PEG grafting density, the biocompatibility of silica carriers increased.

Adsorption of lysozyme on silver and its influence on silver release

Silver is increasingly used in antimicrobial coatings of biomedical devices and implants to hinder infections. As proteins have been shown to largely influence the extent of released metals from various metal surfaces at biological conditions, silver may also be influenced in the same way. The aim of this study is to relate the structure of adsorbed lysozyme (LSZ) to the release of silver from metallic silver surfaces. Simultaneous adsorption measurements were performed in real time on the same surface using combined ellipsometry and quartz crystal microbalance with dissipation monitoring measurements to provide a more comprehensive understanding on the adsorption kinetics and the layer structures. The concentration of LSZ in 0.15 M NaNO3 solution (pH 7, 25 °C) influences the structure of the adsorbed layer. Monolayer coverage is obtained at concentrations ≤0.1 g/L, while a bilayer structure with a rigid inner layer and a relatively loosely adsorbed outer layer is formed at 1 g/L. The inner layer of LSZ is assumed to bind firmly to silver via disulfide bridges, which makes it irreversibly adsorbed with respect to dilution. The amount of released silver is further influenced by the structure of the LSZ layer. At low LSZ concentrations (≤0.1 g/L) the amount of released silver is not significantly different compared with non-protein-containing NaNO3 solutions; however, noticeable reduction was observed at higher concentrations (1 g/L). This reduction in silver release has several possible explanations, including (i) surface complexation between LSZ and silver ions that may result in the incorporation of silver in the irreversible adsorbed layer and, hence, reduce the amount of released silver into solution, and (ii) net charge reversal at the protein/solution interface to slightly positive surface potentials. Any release of silver will therefore exhibit an electrostatic repulsion during transportation through the protein layer results in a reduced amount of silver in solution.

Polyelectrolyte adsorption, interparticle forces, and colloidal aggregation

This review summarizes the current understanding of adsorption of polyelectrolytes to oppositely charged solid substrates, the resulting interaction forces between such substrates, and consequences for colloidal particle aggregation. The following conclusions can be reached based on experimental findings. Polyelectrolytes adsorb to oppositely charged solid substrates irreversibly up to saturation, whereby loose and thin monolayers are formed. The adsorbed polyelectrolytes normally carry a substantial amount of charge, which leads to a charge reversal. Frequently, the adsorbed films are laterally heterogeneous. With increasing salt levels, the adsorbed mass increases leading to thicker and more homogeneous films. Interaction forces between surfaces coated with saturated polyelectrolyte layers are governed at low salt levels by repulsive electric double layer interactions, and particle suspensions are stable under these conditions. At appropriately high salt levels, the forces become attractive, principally due to van der Waals interactions, but eventually also through other forces, and suspensions become unstable. This situation can be rationalized with the classical theory of Derjaguin, Landau, Verwey, and Overbeek (DLVO). Due to the irreversible nature of the adsorption process, stable unsaturated layers form in colloidal particle suspensions at lower polyelectrolyte doses. An unsaturated polyelectrolyte layer can neutralize the overall particle surface charge. Away from the charge reversal point, electric double layer forces are dominant and particle suspensions are stable. As the charge reversal point is approached, attractive van der Waals forces become important, and particle suspensions become unstable. This behaviour is again in line with the DLVO theory, which may even apply quantitatively, provided the polyelectrolyte films are sufficiently laterally homogeneous. For heterogeneous films, additional attractive patch-charge interactions may become important. Depletion interactions may also lead to attractive forces and suspension destabilization, but such interactions become important only at high polyelectrolyte concentrations.

Using in situ X-ray reflectivity to study protein adsorption on hydrophilic and hydrophobic surfaces: benefits and limitations

We have employed in situ X-ray reflectivity (IXRR) to study the adsorption of a variety of proteins (lysozyme, cytochrome c, myoglobin, hemoglobin, serum albumin, and immunoglobulin G) on model hydrophilic (silicon oxide) and hydrophobic surfaces (octadecyltrichlorosilane self-assembled monolayers), evaluating this recently developed technique for its applicability in the area of biomolecular studies. We report herein the highest resolution depiction of adsorbed protein films, greatly improving on the precision of previous neutron reflectivity (NR) results and previous IXRR studies. We were able to perform complete scans in 5 min or less with the maximum momentum transfer of at least 0.52 Å(-1), allowing for some time-resolved information about the evolution of the protein film structure. The three smallest proteins (lysozyme, cytochrome c, and myoglobin) were seen to deposit as fully hydrated, nondenatured molecules onto hydrophilic surfaces, with indications of particular preferential orientations. Time evolution was observed for both lysozyme and myoglobin films. The larger proteins were not observed to deposit on the hydrophilic substrates, perhaps because of contrast limitations. On hydrophobic surfaces, all proteins were seen to denature extensively in a qualitatively similar way but with a rough trend that the larger proteins resulted in lower coverage. We have generated high-resolution electron density profiles of these denatured films, including capturing the growth of a lysozyme film. Because the solution interface of these denatured films is diffuse, IXRR cannot unambiguously determine the film extent and coverage, a drawback compared to NR. X-ray radiation damage was systematically evaluated, including the controlled exposure of protein films to high-intensity X-rays and exposure of the hydrophobic surface to X-rays before adsorption. Our analysis showed that standard measuring procedures used for XRR studies may lead to altered protein films; therefore, we used modified procedures to limit the influence of X-ray damage.

Smart Drug Delivery from Silica Nanoparticles

This chapter describes the different strategies developed so far by the biomedical scientific community aimed at designing smart drug-delivery nanosystems whose features and functionality can be tailored attending to specific clinical needs. Among inorganic carriers, we outline recent advances in mesoporous silica nanoparticles (MSNPs) as multi-functional nanoplatforms to design smart drug-delivery devices. MSNPs can be modified by targeting moieties to deliver specifically the desired drugs into unhealthy cells. Polymeric coatings can be used to provide the system of “stealth” properties and/or stimuli-responsive drug-delivery capability. The synergistic combination of magnetic nanoparticles (mNPs) with MSNPs provides the system with an added value, the possibility of using hyperthermia treatment combined with chemotherapy to increase the antitumor capability of the system or even performing magnetic resonance imaging. MSNPs can be functionalized with molecular nanogates capping the pore outlets to prevent premature release of the cargo before reaching the target cells. The application of a given stimulus (pH change, light, magnetic field, redox potential, etc.) would promote the nanogate removal, thus triggering the drug release. The achievements derived from in vitro and in vivo experiments, which are encouraging the biomedical community to move the MSNPs platforms into clinical trials, are also reviewed.

Surface-protein interactions on different stainless steel grades: effects of protein adsorption, surface changes and metal release

Implantation using stainless steels (SS) is an example where an understanding of protein-induced metal release from SS is important when assessing potential toxicological risks. Here, the protein-induced metal release was investigated for austenitic (AISI 304, 310, and 316L), ferritic (AISI 430), and duplex (AISI 2205) grades in a phosphate buffered saline (PBS, pH 7.4) solution containing either bovine serum albumin (BSA) or lysozyme (LSZ). The results show that both BSA and LSZ induce a significant enrichment of chromium in the surface oxide of all stainless steel grades. Both proteins induced an enhanced extent of released iron, chromium, nickel and manganese, very significant in the case of BSA (up to 40-fold increase), whereas both proteins reduced the corrosion resistance of SS, with the reverse situation for iron metal (reduced corrosion rates and reduced metal release in the presence of proteins). A full monolayer coverage is necessary to induce the effects observed.

Kinetics of protein unfolding at interfaces

The conformation of protein molecules is determined by a balance of various forces, including van der Waals attraction, electrostatic interaction, hydrogen bonding, and conformational entropy. When protein molecules encounter an interface, they are often adsorbed on the interface. The conformation of an adsorbed protein molecule strongly depends on the interaction between the protein and the interface. Recent time-resolved investigations have revealed that protein conformation changes during the adsorption process due to the protein-protein interaction increasing with increasing interface coverage. External conditions also affect the protein conformation. This review considers recent dynamic observations of protein adsorption at various interfaces and their implications for the kinetics of protein unfolding at interfaces.

Interaction of bovine serum albumin and lysozyme with stainless steel studied by time-of-flight secondary ion mass spectrometry and X-ray photoelectron spectroscopy

An in-depth mechanistic understanding of the interaction between stainless steel surfaces and proteins is essential from a corrosion and protein-induced metal release perspective when stainless steel is used in surgical implants and in food applications. The interaction between lysozyme (LSZ) from chicken egg white and bovine serum albumin (BSA) and AISI 316L stainless steel surfaces was studied ex situ by means of X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) after different adsorption time periods (0.5, 24, and 168 h). The effect of XPS measurements, storage (aging), sodium dodecyl sulfate (SDS), and elevated temperature (up to 200 °C) on the protein layers, as well as changes in surface oxide composition, were investigated. Both BSA and LSZ adsorption induced an enrichment of chromium in the oxide layer. BSA induced significant changes to the entire oxide, while LSZ only induced a depletion of iron at the utmost layer. SDS was not able to remove preadsorbed proteins completely, despite its high concentration and relatively long treatment time (up to 36.5 h), but induced partial denaturation of the protein coatings. High-temperature treatment (200 °C) and XPS exposure (X-ray irradiation and/or photoelectron emission) induced significant denaturation of both proteins. The heating treatment up to 200 °C removed some proteins, far from all. Amino acid fragment intensities determined from ToF-SIMS are discussed in terms of significant differences with adsorption time, between the proteins, and between freshly adsorbed and aged samples. Stainless steel-protein interactions were shown to be strong and protein-dependent. The findings assist in the understanding of previous studies of metal release and surface changes upon exposure to similar protein solutions.

Mesoporous silica nanoparticles for the design of smart delivery nanodevices

Mesoporous silica nanoparticles (MSNPs) are receiving growing attention by the scientific community for their groundbreaking potential in nanomedicine. It is possible to load huge amounts of cargo into the mesopore voids and capping the pore entrances with different nanogates. Different internal or external stimuli can provoke the nanocap removal and trigger the departure of the cargo, which permits the design of stimuli-responsive drug delivery nanodevices. It is also feasible to combine the multifunctionality of MSNPs with the wide range of applications of magnetic nanoparticles (mNPs), giving rise to advanced smart nanosystems whose features and functionality can be tailored attending to specific clinical needs. This review describes the possible combinations of MSNPs, stimuli-responsive nanocaps and mNPs and the current scientific challenges aimed at accelerating the progression from bench to bedside.

Oral delivery of therapeutic protein/peptide for diabetes--future perspectives

Diabetes is a metabolic disease and is a major cause of mortality and morbidity in epidemic proportions. A type I diabetic patient is dependent on daily injections of insulin, for survival and also to maintain a normal life, which is uncomfortable, painful and also has deleterious effects. Extensive efforts are being made worldwide for developing noninvasive drug delivery systems, especially via oral route. Oral route is the most widely accepted means of administration. However it is not feasible for direct delivery of peptide and protein drugs. To overcome the gastro-intestinal barriers various types of formulations such as polymeric micro/nanoparticles, liposomes, etc. are investigated. In the recent years lot of advances have taken place in developing and understanding the oral peptide delivery systems. Simultaneously, the development and usage of other peptides having anti-diabetic potentials are also considered for diabetes therapy. In this review we are focusing on the advances reported during the past decade in the field of oral insulin delivery along with the possibility of other peptidic incretin hormones such as GLP-1, exendin-4, for diabetes therapy.

Protein adsorption in three dimensions

Recent experimental and theoretical work clarifying the physical chemistry of blood-protein adsorption from aqueous-buffer solution to various kinds of surfaces is reviewed and interpreted within the context of biomaterial applications, especially toward development of cardiovascular biomaterials. The importance of this subject in biomaterials surface science is emphasized by reducing the "protein-adsorption problem" to three core questions that require quantitative answer. An overview of the protein-adsorption literature identifies some of the sources of inconsistency among many investigators participating in more than five decades of focused research. A tutorial on the fundamental biophysical chemistry of protein adsorption sets the stage for a detailed discussion of the kinetics and thermodynamics of protein adsorption, including adsorption competition between two proteins for the same adsorbent immersed in a binary-protein mixture. Both kinetics and steady-state adsorption can be rationalized using a single interpretive paradigm asserting that protein molecules partition from solution into a three-dimensional (3D) interphase separating bulk solution from the physical-adsorbent surface. Adsorbed protein collects in one-or-more adsorbed layers, depending on protein size, solution concentration, and adsorbent surface energy (water wettability). The adsorption process begins with the hydration of an adsorbent surface brought into contact with an aqueous-protein solution. Surface hydration reactions instantaneously form a thin, pseudo-2D interface between the adsorbent and protein solution. Protein molecules rapidly diffuse into this newly formed interface, creating a truly 3D interphase that inflates with arriving proteins and fills to capacity within milliseconds at mg/mL bulk-solution concentrations C(B). This inflated interphase subsequently undergoes time-dependent (minutes-to-hours) decrease in volume V(I) by expulsion of either-or-both interphase water and initially adsorbed protein. Interphase protein concentration C(I) increases as V(I) decreases, resulting in slow reduction in interfacial energetics. Steady state is governed by a net partition coefficient P=(C(I)/C(B)). In the process of occupying space within the interphase, adsorbing protein molecules must displace an equivalent volume of interphase water. Interphase water is itself associated with surface-bound water through a network of transient hydrogen bonds. Displacement of interphase water thus requires an amount of energy that depends on the adsorbent surface chemistry/energy. This "adsorption-dehydration" step is the significant free energy cost of adsorption that controls the maximum amount of protein that can be adsorbed at steady state to a unit adsorbent surface area (the adsorbent capacity). As adsorbent hydrophilicity increases, adsorbent capacity monotonically decreases because the energetic cost of surface dehydration increases, ultimately leading to no protein adsorption near an adsorbent water wettability (surface energy) characterized by a water contact angle θ→65(°). Consequently, protein does not adsorb (accumulate at interphase concentrations greater than bulk solution) to more hydrophilic adsorbents exhibiting θ<65(°). For adsorbents bearing strong Lewis acid/base chemistry such as ion-exchange resins, protein/surface interactions can be highly favorable, causing protein to adsorb in multilayers in a relatively thick interphase. A straightforward, three-component free energy relationship captures salient features of protein adsorption to all surfaces predicting that the overall free energy of protein adsorption ΔG(ads)(o) is a relatively small multiple of thermal energy for any surface chemistry (except perhaps for bioengineered surfaces bearing specific ligands for adsorbing protein) because a surface chemistry that interacts chemically with proteins must also interact with water through hydrogen bonding. In this way, water moderates protein adsorption to any surface by competing with adsorbing protein molecules. This Leading Opinion ends by proposing several changes to the protein-adsorption paradigm that might advance answers to the three core questions that frame the "protein-adsorption problem" that is so fundamental to biomaterials surface science.

Characterizing the adsorption of proteins on glass capillary surfaces using electrospray-differential mobility analysis

We quantify the adsorption and desorption of a monoclonal immunoglobulin-G antibody, rituxamab (RmAb), on silica capillary surfaces using electrospray-differential mobility analysis (ES-DMA). We first develop a theory to calculate coverages and desorption rate constants from the ES-DMA data for proteins adsorbing on glass capillaries used to electrospray protein solutions. This model is then used to study the adsorption of RmAb on a bare silica capillary surface. A concentration-independent coverage of ≈4.0 mg/m(2) is found for RmAb concentrations ranging from 0.01 to 0.1 mg/mL. A study of RmAb adsorption to bare silica as a function of pH shows maximum adsorption at its isoelectric point (pI of pH 8.5) consistent with literature. The desorption rate constants are determined to be ≈10(-5) s(-1), consistent with previously reported values, thus suggesting that shear forces in the capillary may not have a considerable effect on desorption. We anticipate that this study will allow ES-DMA to be used as a "label-free" tool to study adsorption of oligomeric and multicomponent protein systems onto fused silica as well as other surface modifications.

Peptide interactions with metal and oxide surfaces

Increasing interest in bio-interfaces for medical, diagnostic, or biotechnology applications has highlighted the critical scientific challenge behind both the understanding and control of protein-solid surface interactions. In this context, this Account focuses on the molecular-level characterization of the interactions of peptides, ranging in size from a few amino acids to long sequences, with metal and oxide surfaces. In this Account, we attempt to fill the gap between the well-known basic studies of the interaction of a single amino acid with well-defined metal surfaces and the investigations aimed at controlling biocompatibility or biofilm growth processes. We gather studies performed with surface science tools and macroscopic characterization techniques along with those that use modeling methods, and note the trends that emerge. Sulfur drives the interaction of cysteine-containing peptides with metal surfaces, particularly gold. Moreover, intermolecular interactions, such as hydrogen bonds may induce surface self assembly and chiral arrangements of the peptide layer. Depending on the solvent pH and composition, carboxylates or amino groups may also interact with the surface, which could involve conformational changes in the adsorbed peptide. On oxide surfaces such as titania or silica, researchers have identified carboxylate groups as the preferential peptide binding groups because of their strong electrostatic interactions with the charged surface. In high molecular weight peptides, systematic studies of their interaction with various oxide surfaces point to the preferential interaction of certain peptide sequences: basic residues such as arginine assume a special role. Researchers have successfully used these observations to synthesize adhesive sequences and initiate biomineralization. Studies of the interaction of peptides with nanoparticles have revealed similar binding trends. Sulfur-containing peptides adhere preferentially to gold nanoparticles. Peptides containing aromatic nitrogen also display a high affinity for various inorganic nanoparticles. Finally, we describe a novel class of peptides, genetically engineered peptides for inorganics (GEPIs), which are selected from a phage display protocol for their high binding affinity for inorganic surfaces. Extended investigations have focused on the mechanisms of the molecular binding of these peptides to solid surfaces, in particular the high binding affinity of some sulfur-free sequences of GEPIs to gold or platinum surfaces. We expect that this clearer view of the possible preferential interactions between peptides and inorganic surfaces will facilitate the development of new, more focused research in various fields of biotechnology, such as biocompatibility, biomimetics, or tissue engineering.