Bioavailability and Bioaccumulation of Metal-Based Engineered Nanomaterials in Aquatic Environments

Silica Nanoparticle Size Determines the Mechanisms Underlying the Inhibition of Iron Oxide Nanoparticle Uptake by Daphnia magna

Aquatic environments are complicated systems that contain different types of nanoparticles (NPs). Nevertheless, recent studies of NP toxicity, and especially those that have focused on bioaccumulation have mostly investigated only a single type of NPs. Assessments of the environmental risks of NPs that do not consider co-exposure regimes may lead to inaccurate conclusions and ineffective environmental regulation. Thus, the present study examined the effects of differently sized silica NPs (SiO2 NPs) on the uptake of iron oxide NPs (Fe2O3 NPs) by the zooplankton Daphnia magna. Both SiO2 NPs and Fe2O3 NPs were well dispersed in the experimental medium without significant heteroaggregation. Although all three sizes of SiO2 NPs inhibited the uptake of Fe2O3 NPs, the underlying mechanisms differed. SiO2 NPs smaller than the average mesh size (∼200 nm) of the filtering apparatus of D. magna reduced the accumulation of Fe2O3 NPs through uptake competition, whereas larger SiO2 NPs inhibited the uptake of Fe2O3 NPs mainly by reducing the water filtration rate of the daphnids. Overall, in evaluations of the risks of NPs in the natural environment, the different mechanisms underlying the effects of NPs of different sizes on the uptake of dissimilar NPs should be considered.

Uptake, distribution and elimination of palladium-doped polystyrene nanoplastics in rainbow trout (Oncorhynchus mykiss) following dietary exposure

The ingestion of nanoplastics (NPs) by fish has led to concerns regarding fish health and food chain transfer, but analytical constraints have hindered quantitative data collection on their uptake and depuration. We used palladium-doped polystyrene nanoplastics (PS-Pd NPs, ~200 nm) to track particle fate in rainbow trout (Oncorhynchus mykiss) during a week-long dietary exposure and subsequent 7-day depuration period on a control diet (no added PS-Pd NPs). At Day 3 and 7 of the exposure, and after depuration, the mid intestine, hind intestine, liver, gallbladder, kidney, gill and carcass were sampled. All organs and the carcass were analysed for total Pd content by inductively couple plasma mass spectrometry. After 3 days of exposure, the mid (32.5 ± 8.3 ng g-1) and hind (42.3 ± 8.2 ng g-1) intestine had significantly higher total Pd concentrations compared to the liver and carcass (1.3 ± 0.4 and 3.4 ± 1.1 ng g-1, respectively). At Day 7, there was no time-related difference in any organ (or the carcass) total Pd concentrations compared to Day 3. When the total Pd content was expressed as a body distribution based on mass of tissue, the carcass contained the highest fraction with 72.5 ± 5.2 % at Day 7, which could raise concerns over transfer to higher trophic levels. The total number of particles that entered the fish over the 7 days was 94.5 ± 13.5 × 106 particles, representing 0.07 ± 0.01 % of the Pd the fish had been fed. Following depuration, there was no detectable Pd in any organ or the carcass, indicating clearance from the fish. These data indicate that these NPs are taken into the internal organs and carcass of fish, yet removal of the exposure results in substantial excretion to below the limit of detection.

Insights on the Dynamics and Toxicity of Nanoparticles in Environmental Matrices

The manufacturing rate of nanoparticles (10–100 nm) is steadily increasing due to their extensive applications in the fabrication of nanoproducts related to pharmaceuticals, cosmetics, medical devices, paints and pigments, energy storage etc. An increase in research related to nanotechnology is also a cause for the production and disposal of nanomaterials at the lab scale. As a result, contamination of environmental matrices with nanoparticles becomes inevitable, and the understanding of the risk of nanoecotoxicology is getting larger attention. In this context, focusing on the environmental hazards is essential. Hence, this manuscript aims to review the toxic effects of nanoparticles on soil, water, aquatic, and terrestrial organisms. The effects of toxicity on vertebrates, invertebrates, and plants and the source of exposure, environmental and biological dynamics, and the adverse effects of some nanoparticles are discussed.

Meta-analysis of Bioaccumulation Data for Nondissolvable Engineered Nanomaterials in Freshwater Aquatic Organisms

Understanding the bioaccumulation of engineered nanomaterials (ENMs) is essential for making regulatory decisions on potential environmental risks. Research in the field of ENM bioaccumulation has increased in recent years, but the compilation and statistical analysis of the available experimental data have not been updated. We therefore performed a meta-analysis of the existing literature on the bioaccumulation of eight types of nondissolvable ENMs (titanium dioxide [TiO₂ ], aluminum oxide [Al₂ O₃ ], gold [Au], fullerene [C₆₀ ], carbon nanotubes, iron oxide [FeO_x ], graphene, and polystyrene) in nonmammalian freshwater aquatic organisms across three trophic levels including phytoplankton, zooplankton, and fish. Three typical endpoints were used to assess the bioaccumulation potential: the bioconcentration factor (BCF), the bioaccumulation factor (BAF), and the biomagnification factor (BMF). Our results suggest that zooplankton has greater mean logarithmic BCF and BAF values than phytoplankton (3.31 vs. 1.42) and fish (2.04). The ENMs are biomagnified in zooplankton, with a mean BMF of 17.4, whereas trophic transfer from primary consumers (zooplankton) to secondary consumers (fish) was not observed (mean BMF of 0.13). No clear dependency was identified between the physicochemical characteristics of ENMs (e.g., primary particle size, zeta potential, or shape) and bioaccumulation, except for coated versus uncoated particles accumulated in phytoplankton. Carbonaceous ENMs were found to be more bioaccumulated than the other ENMs we considered, except for TiO₂ . A meta-analysis of bioaccumulation data can (1) deepen the understanding of bioconcentration, bioaccumulation, and biomagnification of ENMs, (2) be used to support grouping strategies as a basis for a safer-by-design approach for ENMs, (3) be integrated into comprehensive hazard and risk assessments, (4) promote the standardization of testing guidelines, and (5) enhance future kinetic bioaccumulation modeling. Environ Toxicol Chem 2022;41:1202-1214. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

In Vitro Assessment Reveals the Effects of Environmentally Persistent Free Radicals on the Toxicity of Photoaged Tire Wear Particles

Tire wear particles (TWP) have been identified as one of the major sources of microplastics (MPs), and few studies have focused on their environmental behaviors and impacts. However, a thorough characteristic and toxicity assessment associated with environmentally persistent free radicals (EPFRs) on the photoaged TWP is missing. In this study, we investigated EPFRs in the process of TWP photoaging and evaluated their toxicity using in vitro bioassays. Our results showed that a total of around 1.0 × 10¹⁷ spins/g EPFRs (g-factors ranging 2.00308-2.00318) was formed on TWP with 60 days of light irradiation, which contained more than 29% of reactive EPFRs (r-EPFRs). Using macrophages as model cells for bioassays, TWP-associated EPFRs trigged endpoints, including the decrease of cell viability (27 to 45%) and the increase of oxidative stress response (46-93%) and inflammatory factor secretion. The enhancement of TWP toxicity with photoaging was confirmed to be attributed to the generated EPFRs combined with other TWP's chemical compositions (e.g., various metals and organics). Most importantly, the toxicity of photoaged TWP was closely correlated with the generated r-EPFRs, which induced reactive oxidant species (ROS) generation. This study provides direct evidence of toxicity on the photoaged TWP particles, revealing the potential contributions of EPFRs to the adverse effect on human health and highlighting the need for an improved understanding of the impacts of EPFRs on the risk assessment of TWP released into the environment.

Eco-Interactions of Engineered Nanomaterials in the Marine Environment: Towards an Eco-Design Framework

Marine nano-ecotoxicology has emerged with the purpose to assess the environmental risks associated with engineered nanomaterials (ENMs) among contaminants of emerging concerns entering the marine environment. ENMs’ massive production and integration in everyday life applications, associated with their peculiar physical chemical features, including high biological reactivity, have imposed a pressing need to shed light on risk for humans and the environment. Environmental safety assessment, known as ecosafety, has thus become mandatory with the perspective to develop a more holistic exposure scenario and understand biological effects. Here, we review the current knowledge on behavior and impact of ENMs which end up in the marine environment. A focus on titanium dioxide (n-TiO₂) and silver nanoparticles (AgNPs), among metal-based ENMs massively used in commercial products, and polymeric NPs as polystyrene (PS), largely adopted as proxy for nanoplastics, is made. ENMs eco-interactions with chemical molecules including (bio)natural ones and anthropogenic pollutants, forming eco- and bio-coronas and link with their uptake and toxicity in marine organisms are discussed. An ecologically based design strategy (eco-design) is proposed to support the development of new ENMs, including those for environmental applications (e.g., nanoremediation), by balancing their effectiveness with no associated risk for marine organisms and humans.

Sub-chronic effects of AgNPs and AuNPs on Gammarus fossarum (Crustacea Amphipoda): From molecular to behavioural responses

The aim of the present study was the assessment of the sub-chronic effects of silver (AgNPs) and gold nanoparticles (AuNPs) of 40 nm primary size either stabilised with citrate (CIT) or coated with polyethylene glycol (PEG) on the freshwater invertebrate Gammarus fossarum. Silver nitrate (AgNO₃) was used as a positive control in order to study the contribution of silver ions potentially released from AgNPs on the observed effects. A multibiomarker approach was used to assess the long-term effects of AgNPs and AuNPs 40 nm on molecular, cellular, physiological and behavioural responses of G. fossarum. Specimen of G. fossarum were exposed for 15 days to 0.5 and 5 µgL^-1 of CIT and PEG AgNPs and AuNPs 40 nm in the presence of food. A significant uptake of both Ag and Au was observed in exposed animals but was under the toxic threshold leading to mortality of G. fossarum. Silver nanoparticles (CIT-AgNPs and PEG-AgNPs 40 nm) led to an up-regulation of Na⁺K⁺ATPase gene expression. An up-regulation of Catalse and Chitinase gene expressions due to exposure to PEG-AgNPs 40 nm was also observed. Gold nanoparticles (CIT and PEG-AuNPs 40 nm) led to an increase of CuZnSOD gene expression. Furthermore, both AgNPs and AuNPs led to a more developed digestive lysosomal system indicating a general stress response in G. fossarum. Both AgNPs and AuNPs 40 nm significantly affected locomotor activity of G. fossarum while no effects were observed on haemolymphatic ions and ventilation.

Can the properties of engineered nanoparticles be indicative of their functions and effects in plants?

The extensive applicability of engineered nanoparticles (ENPs) in various fields such as environment, agriculture, medicine or biotechnology has mostly been attributed to their better physicochemical properties as compared with conventional bulk materials. However, functions and biological effects of ENPs change across different scenarios which impede the progress in their risk assessment and safety management. This review thus intends to figure out whether properties of ENPs can be indicators of their behavior through summarizing and analyzing the available literature and knowledge. The studies have indicated that size, shape, solubility, specific surface area, surface charge and surface reactivity constitute a more accurate measure of ENPs functions and toxic effects in addition to mass concentration. Effects of ENPs are also highly dependent on dose metrics, species and strains of organisms, environmental conditions, exposure route and duration. Searching correlations between properties and functions or biological effects may serve as an effective way in understanding positive and negative impacts of ENPs. This will ensure safe design and sustainable future use of ENPs.

Ecotoxicology of micronized tire rubber: Past, present and future considerations

Micronized tire rubber has recently come into focus as black particles that are found in microplastic (MP) samples worldwide. These particles have been found in all environmental compartments with the most likely source being the abrasion of car tires on road surfaces. Thus, it is well founded that tires are a source of MPs and that tire abrasion is a primary source of anthropogenic particulates. Currently, the impact of tires has been viewed through the lens of particulate pollution together with MPs, but this is a relatively new direction for this topic. Previously ecotoxicological research into the environmental consequences of tires has primarily been related to the leached chemicals from tire particulates. This paper aims to (i) highlight similarities and differences of micronized rubber particles with the existing suite of polymer contaminants termed as 'microplastics' or 'plastic debris', (ii) survey the existing literature on environmental presence, fate, and interaction of micronized rubber particles with biota, and lastly (iii) present future research needs that require consideration in order to move this research area forward. Existing knowledge gaps that require attention include; determining the environmental presence and fate of micronized rubber within different environmental compartments, understanding the interaction of rubber particles with biota, particularly as potential impacts have so far been attributed solely to the leachate, and evaluating whether standard ecotoxicological protocols need to be adapted for particulate contaminants in general and specifically to suit rubber particulates and leachate.

Differential Reactivity of Copper- and Gold-Based Nanomaterials Controls Their Seasonal Biogeochemical Cycling and Fate in a Freshwater Wetland Mesocosm

Reliable predictions of the environmental fate and risk of engineered nanomaterials (ENMs) require a better understanding of ENM reactivity in complex, biologically active systems for chronic low-concentration exposure scenarios. Here, simulated freshwater wetland mesocosms were dosed with ENMs to assess how their reactivity and seasonal changes in environmental parameters influence ENM fate in aquatic systems. Copper-based ENMs (Kocide), known to dissolve in water, and gold nanoparticles (AuNPs), stable against dissolution in the absence of specific ligands, were added weekly to mesocosm waters for 9 months. Metal accumulation and speciation changes in the different environmental compartments were assessed over time. Copper from Kocide rapidly dissolved likely associating with organic matter in the water column, transported to terrestrial soils and deeper sediment where it became associated with organic or sulfide phases. In contrast, Au accumulated on/in the macrophytes where it oxidized and transferred over time to surficial sediment. A dynamic seasonal accumulation and metal redox cycling were found between the macrophyte and the surficial sediment for AuNPs. These results demonstrate the need for experimental quantification of how the biological and chemical complexity of the environment, combined with their seasonal variations, drive the fate of metastable ENMs.

Boosting the catalytic activity of natural magnetite for wet peroxide oxidation

This work explores the modification of naturally occurring magnetite by controlled oxidation (200-400 °C, air atmosphere) and reduction (300-600 °C, H₂ atmosphere) treatments with the aim of boosting its activity in CWPO. The resulting materials were fully characterized by XRD, XPS, TGA, TPR, SEM, and magnetization measurements, allowing to confirm the development of core-shell type structures. The magnetite core of the solid remained unchanged upon the treatment whereas the Fe(II)/Fe(III) ratio of the shell was modified (e.g. 0.42, 0.11 and 0.63 values were calculated for pristine Fe₃O₄, Fe₃O₄-O400, and Fe₃O₄-R400, respectively). The performance of the catalysts was tested in the CWPO of sulfamethoxazole (SMX) (5 mg L^-1) under ambient conditions and circumneutral pH (pH₀ = 5), using the stoichiometric dose of H₂O₂ (25 mg L^-1) and a catalyst load of 1 g L^-1. The key role of the ferrous species on the mineral shell was evidenced. Whereas the oxidation of magnetite led to significantly slower degradation rates of the pollutant, its reduction gave rise to a dramatic increase, achieving the complete removal of SMX in 1.5 h reaction time with the optimum catalyst (Fe₃O₄-R400) compared to the 3.5 h required with the pristine mineral. A reaction mechanism was proposed for SMX degradation, and a kinetic equation based on the Eley-Rideal model was accordingly developed. This model successfully fitted the experimental results. The stability of Fe₃O₄-R400 was evaluated upon five sequential runs. Finally, the versatility of the catalytic system was proved in real environmentally relevant water matrices.

Transcriptomic approach: A promising tool for rapid screening nanomaterial-mediated toxicity in the marine bivalve Mytilus edulis-Application to copper oxide nanoparticles

The extensive development of nanotechnologies will inevitably lead to the release of nanomaterials (NMs) in the environment. As the aquatic environments represent the ultimate sink for various contaminants, it is highly probable that they also constitute a reservoir for NMs and hence aquatic animals represent potential targets. In a regulatory perspective, it is necessary to develop tools to rapidly screen the impact of NMs on model organisms, given that the number of NMs on the market will be increasing. In this context High Throughput Screening approaches represent relevant tools for the investigation of NM-mediated toxicity. The objective of this work was to study the effects of copper oxide nanoparticles (CuONPs) in the marine bivalve Mytilus edulis, using a transcriptomic approach. Mussels were exposed in vivo to CuONPs (10 μg·L^-1CuO NPs) for 24 h and analysis of mRNA expression levels of genes implicated in immune response, antioxidant activities, cell metabolism, cell transport and cytoskeleton was investigated by qPCR on hemocytes and gills. Results showed common effects of CuONPs and its ionic counterpart. However, greater effects of CuONPs on GST, SOD, MT, Actin, ATP synthase gene expressions were observed compared to ionic form indicating that toxicity of CuONPs is not solely due to the release of Cu²⁺. Even though M. edulis genome is not fully characterized, this study provides additional knowledge on the signaling pathways implicated in CuONP-mediated toxicity and demonstrates the reliability of using a qPCR approach to go further in the cellular aspects implicated in response to NPs in marine bivalves.

Signaling pathways involved in metal-based nanomaterial toxicity towards aquatic organisms

Environmental risk assessment of engineered nanomaterials (ENMs) is an emergent field since nanotechnology industry is rapidly growing due to the interesting physicochemical properties of nanomaterials. Metal-based nanomaterials are among the most rapidly commercialized materials and their toxicity towards aquatic animals has been investigated at different levels of the biological organization. The objective of this synthesis review is to give an overview of the signaling molecules that have a key role in metal-based NM mediated cytotoxicity in both marine and freshwater organisms. Since toxicity of metal-based NMs could be (partly) due to metal dissolution, this review only highlights studies that showed a specific nano-effect. From this bibliographic study, three mechanisms (detoxification, immunomodulation and genotoxicity) have been selected as they represent the major cell defense mechanisms and the most studied ones following ENM exposure. This better understanding of NM-mediated cytotoxicity may provide a sound basis for designing environmentally safer nanomaterials.

Microbial Extracellular Polymeric Substances (EPSs) in Ocean Systems

Microbial cells (i.e., bacteria, archaea, microeukaryotes) in oceans secrete a diverse array of large molecules, collectively called extracellular polymeric substances (EPSs) or simply exopolymers. These secretions facilitate attachment to surfaces that lead to the formation of structured 'biofilm' communities. In open-water environments, they also lead to formation of organic colloids, and larger aggregations of cells, called 'marine snow.' Secretion of EPS is now recognized as a fundamental microbial adaptation, occurring under many environmental conditions, and one that influences many ocean processes. This relatively recent realization has revolutionized our understanding of microbial impacts on ocean systems. EPS occur in a range of molecular sizes, conformations and physical/chemical properties, and polysaccharides, proteins, lipids, and even nucleic acids are actively secreted components. Interestingly, however, the physical ultrastructure of how individual EPS interact with each other is poorly understood. Together, the EPS matrix molecules form a three-dimensional architecture from which cells may localize extracellular activities and conduct cooperative/antagonistic interactions that cannot be accomplished efficiently by free-living cells. EPS alter optical signatures of sediments and seawater, and are involved in biogeomineral precipitation and the construction of microbial macrostructures, and horizontal-transfers of genetic information. In the water-column, they contribute to the formation of marine snow, transparent exopolymer particles (TEPs), sea-surface microlayer biofilm, and marine oil snow. Excessive production of EPS occurs during later-stages of phytoplankton blooms as an excess metabolic by product and releases a carbon pool that transitions among dissolved-, colloidal-, and gel-states. Some EPS are highly labile carbon forms, while other forms appear quite refractory to degradation. Emerging studies suggest that EPS contribute to efficient trophic-transfer of environmental contaminants, and may provide a protective refugia for pathogenic cells within marine systems; one that enhances their survival/persistence. Finally, these secretions are prominent in 'extreme' environments ranging from sea-ice communities to hypersaline systems to the high-temperatures/pressures of hydrothermal-vent systems. This overview summarizes some of the roles of exopolymer in oceans.