Advances in Single-component inorganic nanostructures for photoacoustic imaging guided photothermal therapy

White light powered antimicrobial nanoagents for triple photothermal, chemodynamic and photodynamic based sterilization

Antibacterial nanoagents have been increasingly developed due to their favorable biocompatibility, cost-effective raw materials, and alternative chemical or optical properties. Nevertheless, there is still a pressing need for antibacterial nanoagents that exhibit outstanding bacteria-binding capabilities and high antibacterial efficiency. In this study, we constructed a multifunctional cascade bioreactor (GCDCO) as a novel antibacterial agent. This involved incorporating carbon dots (CDs), cobalt sulfide quantum dots (CoSx QDs), and glucose oxidase (GOx) to enhance bacterial inhibition under sunlight irradiation. The GCDCO demonstrated highly efficient antibacterial capabilities attributed to its favorable photothermal properties, photodynamic activity, as well as the synergistic effects of hyperthermia, glucose-augmented chemodynamic action, and additional photodynamic activity. Within this cascade bioreactor, CDs played the role of a photosensitizer for photodynamic therapy (PDT), capable of generating ˙O2- even under solar light irradiation. The CoSx QDs not only functioned as a catalytic component to decompose hydrogen peroxide (H2O2) and generate hydroxyl radicals (˙OH), but they also served as heat generators to enhance the Fenton-like catalysis process. Furthermore, GOx was incorporated into this cascade bioreactor to internally supply H2O2 by consuming glucose for a Fenton-like reaction. As a result, GCDCO could generate a substantial amount of reactive oxygen species (ROS), leading to a significant synergistic effect that greatly induced bacterial death. Furthermore, the in vitro antibacterial experiment revealed that GCDCO displayed notably enhanced antibacterial activity against E. coli (99+ %) when combined with glucose under simulated sunlight, surpassing the efficacy of the individual components. This underscores its remarkable efficiency in combating bacterial growth. Taken together, our GCDCO demonstrates significant potential for use in the routine treatment of skin infections among diabetic patients.

Metal-Free Catalytic Formation of a Donor-Acceptor-Donor Molecule and Its Lewis Acid-Adduct Singlet Diradical with High-Efficient NIR-II Photothermal Conversion

We have synthesized a quinone-incorporated bistriarylamine donor-acceptor-donor (D-A-D) semiconductor 1 by B(C6F5)3 (BCF) catalyzed C-H/C-H cross coupling via radical ion pair intermediates. Coordination of Lewis acids BCF and Al(ORF)3 (RF=C(CF3)3) to the semiconductor 1 afforded diradical zwitterions 2 and 3 by integer electron transfer. Upon binding to Lewis acids, the LUMO energy of 1 is significantly lowered and the band gap of the semiconductor is significantly narrowed from 1.93 eV (1) to 1.01 eV (2) and 1.06 eV (3). 2 and 3 are rare near-infrared (NIR) diradical dyes with broad absorption both centered around 1500 nm. By introducing a photo BCF generator, 2 can be generated by light-dependent control. Furthermore, the integer electron transfer process can also be reversibly regulated via the addition of CH3CN. In addition, the temperature of 2 sharply increased and reached as high as 110 °C in 10 s upon the irradiation of near-infrared-II (NIR-II) laser (1064 nm, 0.7 W cm-2), exhibiting a fast response to laser. It displays excellent photothermal stability with a photothermal (PT) conversion efficiency of 62.26 % and high-quality PT imaging.

Use of Interfacial Interactions and Complexation of Carbon Dots to Construct Ultra-Robust and Efficient Photothermal Film From Micro-Carbonized Polysaccharides

Solar energy conversion technologies, particularly solar-driven photothermal conversion, are both clean and manageable. Although much progress has been made in designing solar-driven photothermal materials, significant challenges remain, not least the photobleaching of organic dyes. To tackle these issues, micro-carbonized polysaccharide chains, with carbon dots (CDs) suspended from the chains, are conceived, just like grapes or tomatoes hanging from a vine. Carbonization of sodium carboxymethyl cellulose (CMC) produces just such a structure (termed CMC-g-CDs), which is used to produce an ultra-stable, robust, and efficient solar-thermal film by interfacial interactions within the CMC-g-CDs. The introduction of the CDs into the matrix of the photothermal material effectively avoided the problem of photobleaching. Manipulating the interfacial interactions (such as electrostatic interactions, van der Waals interactions, π-π stacking, and hydrogen bonding) between the CDs and the polymer chains markedly enhances the mechanical properties of the photothermal film. The CMC-g-CDs are complexed with Fe3+ to eliminate leakage of the photothermal reagent from the matrix and to solve the problem of poor water resistance. The resulting film (CMC-g-CDs-Fe) has excellent prospects for practical application as a photothermal film.

Biosynthesis of CuTe Nanorods with Large Molar Extinction Coefficients for NIR-II Photoacoustic Imaging

Photoacoustic imaging (PAI) in the second near-infrared region (NIR-II), due to deeper tissue penetration and a lower background interference, has attracted widespread concern. However, the development of NIR-II nanoprobes with a large molar extinction coefficient and a high photothermal conversion efficiency (PCE) for PAI and photothermal therapy (PTT) is still a big challenge. In this work, the NIR-II CuTe nanorods (NRs) with large molar extinction coefficients ((1.31 ± 0.01) × 108 cm-1·M-1 at 808 nm, (7.00 ± 0.38) × 107 cm-1·M-1 at 1064 nm) and high PCEs (70% at 808 nm, 48% at 1064 nm) were synthesized by living Staphylococcus aureus (S. aureus) cells as biosynthesis factories. Due to the strong light-absorbing and high photothermal conversion ability, the in vitro PA signals of CuTe NRs were about 6 times that of indocyanine green (ICG) in both NIR-I and NIR-II. In addition, CuTe NRs could effectively inhibit tumor growth through PTT. This work provides a new strategy for developing NIR-II probes with large molar extinction coefficients and high PCEs for NIR-II PAI and PTT.

Remote Control of Energy Transformation-Based Cancer Imaging and Therapy

Cancer treatment requires precise tumor-specific targeting at specific sites that allows for high-resolution diagnostic imaging and long-term patient-tailorable cancer therapy; while, minimizing side effects largely arising from non-targetability. This can be realized by harnessing exogenous remote stimuli, such as tissue-penetrative ultrasound, magnetic field, light, and radiation, that enable local activation for cancer imaging and therapy in deep tumors. A myriad of nanomedicines can be efficiently activated when the energy of such remote stimuli can be transformed into another type of energy. This review discusses the remote control of energy transformation for targetable, efficient, and long-term cancer imaging and therapy. Such ultrasonic, magnetic, photonic, radiative, and radioactive energy can be transformed into mechanical, thermal, chemical, and radiative energy to enable a variety of cancer imaging and treatment modalities. The current review article describes multimodal energy transformation where a serial cascade or multiple types of energy transformation occur. This review includes not only mechanical, chemical, hyperthermia, and radiation therapy but also emerging thermoelectric, pyroelectric, and piezoelectric therapies for cancer treatment. It also illustrates ultrasound, magnetic resonance, fluorescence, computed tomography, photoluminescence, and photoacoustic imaging-guided cancer therapies. It highlights afterglow imaging that can eliminate autofluorescence for sustained signal emission after the excitation.

In situ peptide assemblies for bacterial infection imaging and treatment

Bacterial infections, especially antibiotic-resistant ones, remain a major threat to human health. Advances in nanotechnology have led to the development of numerous antimicrobial nanomaterials. Among them, in situ peptide assemblies, formed by biomarker-triggered self-assembly of peptide-based building blocks, have received increasing attention due to their unique merits of good spatiotemporal controllability and excellent disease accumulation and retention. In recent years, a variety of "turn on" imaging probes and activatable antibacterial agents based on in situ peptide assemblies have been developed, providing promising alternatives for the treatment and diagnosis of bacterial infections. In this review, we introduce representative design strategies for in situ peptide assemblies and highlight the bacterial infection imaging and treatment applications of these supramolecular materials. Besides, current challenges in this field are proposed.

Advances of Photothermal Agents with Fluorescence Imaging/Enhancement Ability in the Field of Photothermal Therapy and Diagnosis

Photothermal therapy (PTT) is an effective cancer treatment method. Due to its easy focusing and tunability of the irradiation light, direct and accurate local treatment can be performed in a noninvasive manner by PTT. This treatment strategy requires the use of photothermal agents to convert light energy into heat energy, thereby achieving local heating and triggering biochemical processes to kill tumor cells. As a key factor in PTT, the photothermal conversion ability of photothermal agents directly determines the efficacy of PTT. In addition, photothermal agents generally have photothermal imaging (PTI) and photoacoustic imaging (PAI) functions, which can not only guide the optimization of irradiation conditions but also achieve the integration of disease diagnosis. If the photothermal agents have function of fluorescence imaging (FLI) or fluorescence enhancement, they can not only further improve the accuracy in disease diagnosis but also accurately determine the tumor location through multimodal imaging for corresponding treatment. In this paper, we summarize recent advances in photothermal agents with FLI or fluorescence enhancement functions for PTT and tumor diagnosis. According to the different recognition sites, the application of specific targeting photothermal agents is introduced. Finally, limitations and challenges of photothermal agents with fluorescence imaging/enhancement in the field of PTT and tumor diagnosis are prospected.

Side-chain engineering of organic photothermal agents for boosting further red-shifted absorption and higher photothermal therapeutic effect

Although organic photothermal agents (PTAs) have been extensively studied in preclinical cancer photothermal therapy (PTT), the internal mechanism, particularly the impact of side chains on photothermal performance, remains inadequately investigated. Herein, we conducted a systematic comparison of the photothermal properties between two organic molecules, namely O-IDTBR with four n-octyl chains and EH-IDTBR with four 2-ethylhexyl chains. With the same conjugated main structure, both O-IDTBR and EH-IDTBR exhibited nearly identical absorption properties (with a peak at 629 nm) in their molecular states. Interestingly, after the formation of nanoparticles (NPs), O-IDTBR NPs with linear alkyl chains exhibit a further red-shifted absorption onset (peak at 711 nm) compared to EH-IDTBR NPs (peak at 662 nm) with branched alkyl chains. Additionally, the photothermal conversion efficiency of O-IDTBR NPs was calculated of 33.7%, which is higher than that of EH-IDTBR NPs (27.7%). This can be attributed to the fact that linear alkyl chains of O-IDTBR NPs promote more intramolecular motions at the aggregated state by extending intermolecular distance and distorting molecular conformation. Therefore, the nonradiative thermal deactivation-induced photothermal property can be further enhanced. Through both in vitro and in vivo experiments, O-IDTBR NPs exhibit effective PTT effect and excellent biocompatibility. This study not only introduces a novel PTA but also opens new avenues for exploring organic optical nano-agents through side-chain engineering to adjust intramolecular motions at the aggregated state.

Phytic acid-Cu2+ framework/Cu2-xS nanocomposites with heat-shock protein down-modulation ability for enhanced multimodal combination therapy

Mild-temperature photothermal therapy (mPTT) has shown some advantages over traditional photothermal therapy, such as reducing the damage to surrounding healthy tissues and minimizing side effects. Nevertheless, cancer cells can easily repair damage caused by mild hyperthermia due to heat shock proteins (HSPs). Thus, it is imperative to maximize the mPTT efficiency by down-regulating HSPs overexpression and combining other cancer treatments. Herein, we report the synthesis of phytic acid (PA)-Cu2+ framework/copper sulfide (Cu2-xS) nanocomposites (abbreviated as PA-Cu/Cu2-xS NPs) as the novel therapeutic platform that can down-regulate HSPs overexpression for enhanced multimodal mPTT/chemodynamic therapy (CDT)/chemotherapy. PA-Cu/Cu2-xS NPs were prepared through self-assembly and in-situ vulcanization strategy, resulting in irregular-shaped particles with an approximate size of 100 nm. PA-Cu/Cu2-xS NPs display a plasmon effect from Cu2-xS, which enhances near-infrared (NIR) absorption and possesses excellent photothermal conversion efficiency (41.7%). Moreover, PA-Cu/Cu2-xS NPs exhibit Fenton-like reaction activity resulting from the Cu ions for CDT, and the reaction activity can be further improved 1.3 times due to mild hyperthermia during mPTT. Furthermore, the generated hydroxyl radical (•OH) can effectively decrease HSPs level to enhance mPTT. PA-Cu/Cu2-xS NPs can also serve as a drug delivery system, and they are capable of loading doxorubicin (DOX) with a loading ability (20.7%). Combining mPTT/CDT/chemotherapy exhibits significant inhibition of tumor growth. This approach can serve as a basis for designing more exquisite platforms that combine mPTT with other therapies to achieve more effective cancer treatment.

Visualization of photothermal therapy by semiconducting polymer dots mediated photoacoustic detection in NIR II

Visualization of photothermal therapy mediated by photothermal transduction agents (PTAs) is important to promote individual treatment of patients with low side effects. Photoacoustic detection has emerged as a promising noninvasive method for the visualization of PTAs distribution but still has limitations in temperature measurement, including poor measurement accuracy and low tissue penetration depth. In this study, we developed biocompatible semiconducting polymer dots (SPD) for in situ coupling of photothermal and photoacoustic detection in the near-infrared II window. SPD has dual photostability under pulsed laser and continuous-wave laser irradiation with a photothermal conversion efficiency of 42.77%. Meanwhile, a strong correlation between the photoacoustic signal and the actual temperature of SPD can be observed. The standard deviation of SPD-mediated photoacoustic thermometry can reach 0.13 °C when the penetration depth of gelatin phantom is 9.49 mm. Preliminary experimental results in vivo show that SPD-mediated photoacoustic signal has a high signal-to-noise ratio, as well as good performance in temperature response and tumor enrichment. Such a study not only offers a new nanomaterial for the visualization of photothermal therapy but will also promote the theranostic platform for clinical applications.

Quantitative, precise and multi-wavelength evaluation of the light-to-heat conversion efficiency for nanoparticular photothermal agents with calibrated photoacoustic spectroscopy

Biomedical photothermal therapy with optical nanoparticles is based on the conversion of optical energy into heat through three steps: optical absorption, thermal conversion of the absorbed energy and heat transfer to the surrounding medium. The light-to-heat conversion efficiency (LHCE) has become one of the main metrics to quantitatively characterize the last two steps and evaluate the merit of nanoparticules for photothermal therapy. The estimation of the LHCE is mostly performed by monitoring the temperature evolution of a solution under laser irradiation. However, this estimation strongly depends on the experimental set-up and the heat balance model used. We demonstrate here, theoretically and experimentally, that the LHCE at multiple wavelengths can be efficiently and directly determined, without the use of models, by calibrated photoacoustic spectroscopy. The method was validated using already characterized colloidal suspensions of silver sulfide nanoparticles and maghemite nanoflowers and an uncertainty of 3 to 7% was estimated for the LHCE determination. Photoacoustic spectroscopy provides a new, precise and robust method of analysis of the photothermal capabilities of aqueous solutions of nanoagents.

Conjugated Nanoparticles for Solid Tumor Theranostics: Unraveling the Interplay of Known and Unknown Factors

Cancer diagnoses have been increasing worldwide, and solid tumors are among the leading contributors to patient mortality, creating an enormous burden on the global healthcare system. Cancer is responsible for around 10.3 million deaths worldwide. Solid tumors are one of the most prevalent cancers observed in recent times. On the other hand, early diagnosis is a significant challenge that could save a person's life. Treatment with existing methods has pitfalls that limit the successful elimination of the disorder. Though nanoparticle-based imaging and therapeutics have shown a significant impact in healthcare, current methodologies for solid tumor treatment are insufficient. There are multiple complications associated with the diagnosis and management of solid tumors as well. Recently, surface-conjugated nanoparticles such as lipid nanoparticles, metallic nanoparticles, and quantum dots have shown positive results in solid tumor diagnostics and therapeutics in preclinical models. Other nanotheranostic material platforms such as plasmonic theranostics, magnetotheranostics, hybrid nanotheranostics, and graphene theranostics have also been explored. These nanoparticle theranostics ensure the appropriate targeting of tumors along with selective delivery of cargos (both imaging and therapeutic probes) without affecting the surrounding healthy tissues. Though they have multiple applications, nanoparticles still possess numerous limitations that need to be addressed in order to be fully utilized in the clinic. In this review, we outline the importance of materials and design strategies used to engineer nanoparticles in the treatment and diagnosis of solid tumors and how effectively each method overcomes the drawbacks of the current techniques. We also highlight the gaps in each material platform and how design considerations can address their limitations in future research directions.

Photothermal-Responsive Intelligent Hybrid of Hierarchical Carbon Nanocages Encapsulated by Metal-Organic Hydrogels for Sensitized Photothermal Therapy

Hierarchical carbon nanocages as emerging nanomaterials have a great potential for photothermal therapy due to their unique porous structure, high specific surface area, and excellent photothermal property. Herein, a hierarchical nitrogen-doped carbon nanocage (hNCNC) is introduced as a second near-infrared photothermal agent, and then functionalizes it with metal-organic hydrogel (MOG) to form a thermal-responsive switch for sensitized photothermal therapy. Upon 1064 nm light irradiation, the hNCNCs exhibit a remarkable photothermal conversion efficiency of 65.9% owing to a high near-infrared extinction coefficient. Meanwhile, due to the hierarchical structure, hNCNCs show 60.2% (wt./wt.) loading efficiency of quercetin, a heat shock protein (Hsp70) inhibitor. Through thermal-driven dry-gel transformation, the coating MOGs intelligently release the encapsulated quercetin for sensitizing cancer cells to heat. Based on the synergistic effect of hyperthermia elevation and thermal-driven drug release, the dual thermal utilization platform achieves effective photothermal tumor ablation in vivo under low concentration of hNCNCs and mild irradiation, which provides a new diagram of intelligent responsive photothermal agents for enhanced photothermal therapy.

Inorganic nanoparticle-integrated mesenchymal stem cells: A potential biological agent for multifaceted applications

Mesenchymal stem cell (MSC)-based therapies are flourishing. MSCs could be used as potential therapeutic agents for regenerative medicine due to their own repair function. Meanwhile, the natural predisposition toward inflammation or injury sites makes them promising carriers for targeted drug delivery. Inorganic nanoparticles (INPs) are greatly favored for their unique properties and potential applications in biomedical fields. Current research has integrated INPs with MSCs to enhance their regenerative or antitumor functions. This model also allows the in vivo fate tracking of MSCs in multiple imaging modalities, as many INPs are also excellent contrast agents. Thus, INP-integrated MSCs would be a multifunctional biologic agent with great potential. In this review, the current roles performed by the integration of INPs with MSCs, including (i) enhancing their repair and regeneration capacity via the improvement of migration, survival, paracrine, or differentiation properties, (ii) empowering tumor-killing ability through agent loaded or hyperthermia, and (iii) conferring traceability are summarized. An introduction of INP-integrated MSCs for simultaneous treatment and tracking is also included. The promising applications of INP-integrated MSCs in future treatments are emphasized and the challenges to their clinical translation are discussed.

Flexible Curcumin-Loaded Zn-MOF Hydrogel for Long-Term Drug Release and Antibacterial Activities

Management of chronic inflammation and wounds has always been a key issue in the pharmaceutical and healthcare sectors. Curcumin (CCM) is an active ingredient extracted from turmeric rhizomes with antioxidant, anti-inflammatory, and antibacterial activities, thus showing significant effectiveness toward wound healing. However, its shortcomings, such as poor water solubility, poor chemical stability, and fast metabolic rate, limit its bioavailability and long-term use. In this context, hydrogels appear to be a versatile matrix for carrying and stabilizing drugs due to their biomimetic structure, soft porous microarchitecture, and favorable biomechanical properties. The drug loading/releasing efficiencies can also be controlled via using highly crystalline and porous metal-organic frameworks (MOFs). Herein, a flexible hydrogel composed of a sodium alginate (SA) matrix and CCM-loaded MOFs was constructed for long-term drug release and antibacterial activity. The morphology and physicochemical properties of composite hydrogels were analyzed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-Vis), Raman spectroscopy, and mechanical property tests. The results showed that the composite hydrogel was highly twistable and bendable to comply with human skin mechanically. The as-prepared hydrogel could capture efficient CCM for slow drug release and effectively kill bacteria. Therefore, such composite hydrogel is expected to provide a new management system for chronic wound dressings.

Nanomaterials for photothermal cancer therapy

Cancer has emerged as a pressing global public health issue, and improving the effectiveness of cancer treatment remains one of the foremost challenges of modern medicine. The primary clinical methods of treating cancer, including surgery, chemotherapy and radiotherapy, inevitably result in some adverse effects on the body. However, the advent of photothermal therapy offers an alternative route for cancer treatment. Photothermal therapy relies on photothermal agents with photothermal conversion capability to eliminate tumors at high temperatures, which offers advantages of high precision and low toxicity. As nanomaterials increasingly play a pivotal role in tumor prevention and treatment, nanomaterial-based photothermal therapy has gained significant attention owing to its superior photothermal properties and tumor-killing abilities. In this review, we briefly summarize and introduce the applications of common organic photothermal conversion materials (e.g., cyanine-based nanomaterials, porphyrin-based nanomaterials, polymer-based nanomaterials, etc.) and inorganic photothermal conversion materials (e.g., noble metal nanomaterials, carbon-based nanomaterials, etc.) in tumor photothermal therapy in recent years. Finally, the problems of photothermal nanomaterials in antitumour therapy applications are discussed. It is believed that nanomaterial-based photothermal therapy will have good application prospects in tumor treatment in the future.

Recent advances in Prussian blue-based photothermal therapy in cancer treatment

Malignant tumours are a serious threat to human health. Traditional chemotherapy has achieved breakthrough improvements but also has significant detrimental effects, such as the development of drug resistance, immunosuppression, and even systemic toxicity. Photothermal therapy (PTT) is an emerging cancer therapy. Under light irradiation, the phototherapeutic agent converts optical energy into thermal energy and induces the hyperthermic death of target cells. To date, numerous photothermal agents have been developed. Prussian blue (PB) nanoparticles are among the most promising photothermal agents due to their excellent physicochemical properties, including photoacoustic and magnetic resonance imaging properties, photothermal conversion performance, and enzyme-like activity. By the construction of suitably designed PB-based nanotherapeutics, enhanced photothermal performance, targeting ability, multimodal therapy, and imaging-guided cancer therapy can be effectively and feasibly achieved. In this review, the recent advances in PB-based photothermal combinatorial therapy and imaging-guided cancer therapy are comprehensively summarized. Finally, the potential obstacles of future research and clinical translation are discussed.

Multicolor, injectable BSA-based lanthanide luminescent hydrogels with biodegradability

Protein hydrogels have attracted increasing attention because of their excellent biodegradability and biocompatibility, but frequently suffer from the single structures and functions. As a combination of luminescent materials and biomaterials, multifunctional protein luminescent hydrogels can exhibit wider applications in various fields. Herein, we report a novel, multicolor tunable, injectable, and biodegradable protein-based lanthanide luminescent hydrogel. In this work, urea was utilized to denature BSA to expose disulfide bonds, and tris(2-carboxyethyl)phosphine (TCEP) was employed to break the disulfide bonds in BSA to generate free thiols. A part of free thiols in BSA rearranged into disulfide bonds to form a crosslinked network. In addition, lanthanide complexes (Ln(4-VDPA)₃), containing multiple active reaction sites, could react with the remaining thiols in BSA to form the second crosslinked network. The whole process avoids the use of nonenvironmentally friendly photoinitiators and free radical initiators. The rheological properties and structure of hydrogels were investigated, and the luminescent performances of hydrogels were studied in detail. Finally, the injectability and biodegradability of hydrogels were verified. This work will provide a feasible strategy for the design and fabrication of multifunctional protein luminescent hydrogels, which may have further applications in biomedicine, optoelectronics, and information technology.