Textile dye removal from aqueous solutions using cheap MgO nanomaterials: Adsorption kinetics, isotherm studies and thermodynamics

Impacting the Surface Chemistry of NiAu by Immobilizing on MgO/N-Rich Nanoporous Carbon Heterostructures for Boosting Catalytic Activities

Tuning the physical and chemical interaction between metal-metal' (M-M') and metal-support is an ideal way to realize enhanced catalytic activity of metal nanoparticles (NPs). As a proof of concept, herein we report the fabrication of nickel-gold (Ni-Au) alloy nanoparticles attached to N-doped nanoporous carbon (NPC) intervened with MgO (Ni73Au27@MgO-NPC), achieved through the impregnation of metal precursors into Schiff-base network polymer (SNP) framework along with Mg(OH)2 and pyrolysis at 800 °C in N2 atmosphere. With high stability and heterogeneity, the nickel rich Ni73Au27@MgO-NPC exhibited higher catalytic activities with turnover frequencies of 29,272 h-1 (hydrogenation of p-nitrophenol), 93,843 h-1 (degradation of methyl orange), and 2,218 h-1 (epoxidation of stilbene), compared to commercial 10 wt % Pd/C. Enhanced catalytic activity is correlated to the synchronized electron density enhancement in Au, by Ni and MgO/N-rich nanoporous carbon heterostructures, as evident from detailed X-ray photoelectron spectroscopic studies.

New combined experimental and DFT studies for adsorption of sole Azo-dye or binary cationic dyes from aqueous solution

Textile-toxic synthetic dyes, which possess complex aromatic structures, are emitted into wastewater from various branches. To address this issue, the adsorption process was applied as an attractive method for the removal of dye contaminants from water in this article. An unprecedented integrated experimental study has been carried out, accompanied by theoretical simulations at the DFT-B3LYP/6-31G (d,P) level of theory to investigate how single Maxilon Blue GRL (MxB) dye or and its mixture with MG (Malachite Green) dyes interact with the adsorbent and compare the obtained results with the data obtained through experimentation. The full geometry optimization revealed the physical adsorption of dyes on the Al2O3 surface. Non-linear optical properties (NLO) results emphasized that the complex MG-Al2O3-MxB is a highly promising material in photo-applications, and the adsorbed binary system is energetically more favorable compared to the adsorbed sole dye system. The experimental results for (MxB) dye adsorption onto γ-Al2O3 affirmed that the optimum conditions to get more than 98% uptake were at dye concentration 100 ppm, pH 10, adsorbent content 0.05 g, and equilibrium time only 20 min. The kinetic and isothermal studies revealed that the adsorption accepted with the pseudo-second-order and Freundlich isotherm model, respectively. The removal efficiency of the mixture of MxB and MG dyes was the highest but did not change clearly with increasing the % of any of them. The details of the interaction mechanisms of the sole and binary dyes were proven.

Ophiorrhiza mungos-Mediated Silver Nanoparticles as Effective and Reusable Adsorbents for the Removal of Methylene Blue from Water

Green synthesis of silver nanoparticles (AgNPs) using a plant extract has attracted significant attention in recent years. It is found as an alternative for other physicochemical approaches because of its simplicity, low cost, and eco-friendly rapid steps. In the present study, Ophiorrhiza mungos (Om)-mediated AgNPs have been shown to be effective bioadsorbents for methylene blue (MB) dye removal (88.1 ± 1.74%) just after 1 h at room temperature in the dark from an aqueous medium for the first time. Langmuir and Freundlich isotherms fit the experimental results having the correlation coefficient constants R2 = 0.9956 and R2 = 0.9838, respectively. From the Langmuir fittings, the maximum adsorption capacity and adsorption intensity were found to be 80.451 mg/g and 0.041, respectively, indicating the excellent performance and spontaneity of the process. Taking both models under consideration, interestingly, our findings indicated a fairly cooperative multilayer adsorption that might have been governed by chemisorption and physisorption, whereas the adsorption kinetics followed the pseudo-second-order kinetics mechanism. The positive and low values of enthalpy (ΔH0 = 4.91 kJ/mol) confirmed that adsorption is endothermic and physical in nature; however, the negative free energy and positive entropy value (ΔS0 = 53.69 J/mol K) suggested that the adsorption is spontaneous. The biosynthesized adsorbent was successfully reused up to the fifth cycle. A proposed reaction mechanism for the adsorption process of MB dye onto Om-AgNPs is suggested. The present study may offer a novel finding such as an effective and sustainable approach for the removal of MB dye from water using biosynthesized Om-AgNPs as reusable adsorbents at a comparatively faster rate at a low dose for industrial applications.

Magnetic Fe3O4 nanoparticles loaded guava leaves powder impregnated into calcium alginate hydrogel beads (Fe3O4-GLP@CAB) for efficient removal of methylene blue dye from aqueous environment: Synthesis, characterization, and its adsorption performance

In the present work, a novel Fe3O4-GLP@CAB was successfully synthesized via a co-precipitation procedure and applied for the removal of methylene blue (MB) from aqueous environment. The structural and physicochemical characteristics of the as-prepared materials were explored using a variety of characterization methods, including pHPZC, XRD, VSM, FE-SEM/EDX, BJH/BET, and FTIR. The effects of several experimental factors on the uptake of MB using Fe3O4-GLP@CAB were examined through batch experiments. The highest MB dye removal efficiency of Fe3O4-GLP@CAB was obtained to be 95.2 % at pH 10.0. Adsorption equilibrium isotherm data at different temperatures showed an excellent agreement with the Langmuir model. The adsorption uptake of MB onto Fe3O4-GLP@CAB was determined as 136.7 mg/g at 298 K. The kinetic data were well-fitted by the pseudo-first-order model, indicating that physisorption mainly controlled it. Several thermodynamic variables derived from adsorption data, like as ΔGo, ΔSo, ΔHo, and Ea, accounted for a favourable, spontaneous, exothermic, and physisorption process. Without seeing a substantial decline in adsorptive performance, the Fe3O4-GLP@CAB was employed for five regeneration cycles. Because they can be readily separated from wastewater after treatment, the synthesized Fe3O4-GLP@CAB was thus regarded as a highly recyclable and effective adsorbent for MB dye.

Investigation of the removal kinetics, thermodynamics and adsorption mechanism of anionic textile dye, Remazol Red RB, with powder pumice, a sustainable adsorbent from waste water

Excessive growth and abnormal use of dyes and water in the textile industry cause serious environmental problems, especially with excessive pollution of water bodies. Adsorption is an attractive, feasible, low-cost, highly efficient and sustainable technique in terms of green chemistry for the removal of pollutants from water. This study aims to investigate the removal kinetics, thermodynamics and adsorption mechanism of Remazol Red RB, which was chosen as a representative anionic reactive dye, from synthetic wastewater using powdered pumice, taking into account various experimental parameters such as initial dye concentration, adsorption time, temperature and pH. Moreover, to support the proposed adsorption mechanism, before and after adsorption of the samples, the Fourier transform infrared spectrophotometer (FTIR) spectra, X-ray powder diffraction (XRD) diffractograms and High resolution transmission electron microscopy (HRTEM) images were also taken and used. The results show that powder pumice can be an efficient adsorbent for anionic dye removal with a relatively high adsorption capacity of 38.90 mg/g, and it is very effective in 30-60 min in mild conditions. The experimental data showed a high agreement with the pseudo-second-order kinetic model and the Freundlich adsorption isotherm equation. In addition, thermodynamically, the process exhibited exothermic nature and standard isosteric enthalpy and entropy changes of -4.93 kJ/mol and 16.11 J/mol. K were calculated. It was determined that the adsorption mechanism was predominantly based on T-shaped pi-pi interactions and had physical characteristics.

Facile synthesis of MgO nanoparticles for effective degradation of organic dyes

In the present study, we have synthesized magnesium oxide (MgO) nanoparticles by a facile and cost-effective chemical co-precipitation method with annealing at three different temperatures (350°C, 450°C, and 550°C) for the removal of various organic dyes. X-ray diffraction studies revealed that the prepared samples are having sizes below 20 nm and with pure phase. Phase transformation of hexagonal Mg(OH)₂ nanoparticles to discretely cubical structured MgO nanoparticles has been observed with increasing the annealing temperatures which is also supported by the TGA/DSC analysis. Mg-O stretching vibration peaks in the range of 400-800 cm^-1 obtained by FTIR spectroscopy support the formation of MgO nanoparticles. The observed Raman active bands for the annealed sample at 550°C confirm the formation of the nanocrystalline phase since these bands are typically absent in the bulk MgO as well as in Mg(OH)₂. The surface morphology of the as-prepared Mg(OH)₂ are aggregated nano-petals which changed into spherical shape for MgO annealed at 550°C as studied by field emission scanning electron microscopy (FESEM). The specific surface area of MgO nanoparticles annealed at 550°C using BET isotherms is found to be 37.487 m²g^-1. The optical bandgaps of the prepared samples are found to be in the range of 4.4 to 5.1 eV using the Tauc plot. Adsorption studies with a variation of initial brilliant green dye concentration and contact time are carried out along with the studies of adsorption kinetic and isotherm models. Langmuir isotherm model is the most suitable model on the basis of correlation constant with maximum BG dye adsorption capacity onto MgO@550°C which is found to be 63.9 mg/g. The adsorption kinetics followed the pseudo-second-order model. Also prepared pristine MgO nanoparticles showed significant photocatalytic performance for the degradation of various dyes; brilliant green (BG: 88.91%), methylene blue (MB: 79.05%), crystal violet (CV: 76.49%), methyl orange (MO: 68.62%), and brilliant blue (BB: 40.44%) under visible irradiation. MgO nanoparticles could be a promising adsorbent and photocatalyst that may be employed in the treatment of effluents from industries.

One-pot synthesis of metal oxide-clay composite for the evaluation of dye removal studies: Taguchi optimization of parameters and environmental toxicity studies

The present study demonstrates the synthesis of eco-friendly metal oxide-clay composites (MgO-clay and CaO-clay) with phytochemical functionalization. The physical and chemical properties of prepared composites were characterized using standard techniques viz. scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. The effect of pH on the dye adsorption capability of the synthesized composites was studied. The adsorption of an anionic dye methyl orange (MO) and a cationic due methylene blue (MB) was favored in the acidic and basic regions, respectively. The Taguchi design approach was adopted for the removal of MO and MB from wastewater using the synthesized composites. The obtained results suggest that initial dye concentration and composite dosage were the most influential parameters in dye removal among all the studied parameters. The adsorption experiments were carried out using MgO-clay and CaO-clay composites with the optimum conditions obtained from Taguchi optimization to validate the predicted response. The experimental parameters viz. the effect of contact time, initial dye concentration, and solution temperature were studied for screened composite (CaO-clay) with optimized conditions. The obtained results were interpreted using standard isotherms and kinetic models. A maximum adsorption capacity of 571 ± 10 and 859 ± 14 mg g^-1 was obtained from the Langmuir adsorption isotherm for MO and MB, respectively. Regeneration studies suggested that the CaO-clay composite can be utilized up to 3 cycles with reduced adsorption capacity of the dyes over cycles due to the solid binding nature of dyes on the CaO-clay composite. The fresh and utilized CaO-clay composite were tested for their environmental toxicity analysis using ecologically important soil microorganisms. The obtained results suggested no detrimental effects on soil microbe's functionality, indicating their threat-free disposal in the soil environment.

Facile synthesis of biopolymer decorated magnetic coreshells for enhanced removal of xenobiotic azo dyes through experimental modelling

Since contamination of xenobiotics in water bodies has become a global issue, their removal is gaining ample attention lately. In the present study, nZVI was synthesized using chitosan for removal of two such xenobitic dyes, Bromocresol green and (BCG) and Brilliant blue (BB), which have high prevalence in freshwater and wastewater matrices. nZVI functionalization prevents nanoparticle aggregation and oxidation, enhancing the removal of BCG and BB with an efficiency of 84.96% and 86.21%, respectively. XRD, FESEM, EDS, and FTIR have been employed to investigate the morphology, elemental composition, and functional groups of chitosan-modified nanoscale-zerovalent iron (CS@nZVI). RSM-CCD model was utilized to assess the combined effect of five independent variables and determine the best condition for maximum dye removal. The interactions between adsorbent dose (2-4 mg), pH (4-8), time (20-40 min), temperature (35-65 0C), and initial dye concentration (40-60 mg/L) was modeled to study the response, i.e., dye removal percentage. The reaction fitted well with Langmuir isotherm and pseudo-first-order kinetics, with a maximum qe value of 426.97 and 452.4 mg/g for BCG and BB, respectively. Thermodynamic analysis revealed the adsorption was spontaneous, and endothermic in nature. Moreover, CS@nZVI could be used up to five cycles of dye removal with remarkable potential for real water samples.

Impact of N, O Heteroatoms in Asphaltene on Adsorption of Vanadyl/Nickel Etioporphyrin

The interaction between functionalized graphene and metal porphyrins was studied for a better understanding of the influence of the N and O heteroatoms in asphaltene on demetallization efficiency during the solvent deasphalting process. The theoretical simulation indicated a strong inhibitory effect of the aminated/carboxylated side group for chemical adsorption of metal porphyrins. The differences of adsorption behavior for graphene, aminated graphene, and Canadian oil sands bitumen vacuum tower bottom asphaltene (VTB-asp) were also analyzed. It was found that the introduction of aminated side groups to the graphene not only compromised the electron delocalization capacity of the polyaromatic nuclei hydrocarbon skeleton of graphene but also caused a steric hindrance effect on the internal diffusion of metal porphyrins, leading to decreased adsorption active sites and internal diffusion rate, respectively. It was also found that metal porphyrins can be barely adsorbed on carboxylated graphene at 25 °C.

MgO coated magnetic Fe3O4@SiO2 nanoparticles with fast and efficient phosphorus removal performance and excellent pH stability

A regenerable MgO-coated magnetic Fe₃O₄@SiO₂ (FSM) composite effectively avoided the agglomeration of nano-MgO, which was resoundingly used for efficient and rapid phosphorus removal from aqueous solutions. Based on an initial screening of synthesized FSM with different Mg/citric acid molar ratios in terms of phosphorus adsorption capacity, an FSM composite with a Mg-citric acid molar ratio of 1:1 (FSM-1:1) was determined as the optimal choice. Scanning electron microscope (SEM), Fourier transform infrared (FTIR) and X-ray diffraction (XRD) showed that the prepared Fe₃O₄ was triumphantly loaded and the nano-MgO nanoparticles were evenly distributed on the surface of magnetic mesoporous silica. N₂ adsorption-desorption experiments manifested that FSM-1:1 had a large specific surface area of 124.3 m²/g and the pore size distribution calculated based on the BJH model was centered at 9.36 nm. Furthermore, FSM-1:1 not only exhibited fast adsorption kinetics (60 min) but also had a high maximum theoretical adsorption capacity of 223.6 mg P/g, which was superior to all the other Mg-based adsorbents. Remarkably, due to the coating of MgO, FSM-1:1 exhibited ultra-high stability in the pH range of 3-11, a wider range than many other Mg-modified sorbents. Our adsorbents also showed excellent selectivity for phosphate anions even in the presence of various coexisting anions (e. g. NO₃^-, Cl^- and SO₄^2-) with varying ionic strengths (0.01 and 0.1 M), good recyclability, the removal rate of phosphate still reached 89.0% after three cycles. Electrostatic attraction, Lewis acid-base interaction and the ligand exchange between Mg-OH and phosphate anions were responsible for the phosphate adsorption mechanisms.

Adsorption isotherm models: A comprehensive and systematic review (2010-2020)

Among numerous methods developed in purification and separation industries, the adsorption process has received considerable attention due to its inexpensive, facile, and eco-friendly nature. The importance of the adsorption process causes extraordinary endeavors for modeling the adsorption isotherms during the years; thus, myriads of research have been conducted and many reviews have been published. In this paper, we have attempted to gather the most widely used adsorption isotherms and their related definitions, along with examples of correlated work of the recent decade. In the present review, 37 adsorption isotherms with about 400 references have been collected from the research published in the period of 2010-2020. The adsorption isotherms utilized are alphabetically organized for ease of access. The parameters of each isotherm, as well as the applicable definitions, are presented in the table, in addition to being discussed in the text. Another table is provided for the practical use of researchers, featuring the usage of the related isotherms in peer-reviewed studies.

Integrated experimental and theoretical insights for Malachite Green Dye adsorption from wastewater using low cost adsorbent

Water pollution is one of the problems that threaten humanity, and to confront it with only experimental procedures is not enough. It is necessary to integrate both practical methods and theoretical calculations to achieve decontamination with the most accurate interpretation. Hence, discussing the experimental mechanism study of Malachite Green (MG) dye adsorption with the help of the application of density functional theory (DFT) calculations is the main goal of this article. The experimental results affirmed that the preparation of γ-Al₂O₃ by precipitation method using (NH₄)₂CO₃ improved the porosity, the surface capability, and the adsorbent capacities (q_max = 210 mg/g) at optimum condition compared with the previous studies. Kinetic and equilibrium studies showed that the adsorption follows the pseudo-second-order model and Freundlich isotherm model, respectively. Also, the calculated and observed thermodynamic parameters exerted positive values of ΔH° and ΔS°, which translates into an endothermic process with increasing disorder of the system. Theoretical calculations at DFT- B3LYP/6-31G (d,P) level of theory were calculated to show the selectivity of using the cationic form of MG in the experimental measurements to find the interaction mechanism. The electronic structure and intramolecular charge transfer of MG, its cationic form and the complex of MG-Al were investigated theoretically at the B3LYP/6-31 G (d,p) level of theory. The equilibrium geometries of MG, its cationic form and the complex of MG-Al were determined, and it was found that these geometries are non-planar. The E_HOMO and E_LUMO energies can be used to calculate the global properties; chemical hardness (η), softness (S) and electronegativity (χ). The calculated non-linear optical parameters (NLO) of the studied compounds, the electronic dipole moment (μ), first-order hyperpolarizability (β), the hyper-Rayleigh scattering (β_HRS) and the depolarization ratio (DR), showed promising optical properties. Finally, the computational and the experimental results indicated that the adsorption efficiency of MG from wastewater was directly associated with the dye electrophilicity power.

Facile Microwave Hydrothermal Synthesis of ZnFe2O4/rGO Nanocomposites and Their Ultra-Fast Adsorption of Methylene Blue Dye

The industry development in the last 200 years has led to to environmental pollution. Dyes emitted by pharmaceutical and other industries are major organic pollutants. Organic dyes are a pollutant that must be removed from the environment. In this work, we adopt a facile microwave hydrothermal method to synthesize ZnFe2O4/rGO (ZFG) adsorbents and investigate the effect of synthesis temperature. The crystal structure, morphology, chemical state, and magnetic property of the nanocomposite are investigated by X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, transmission electron microscopy, and a vibrating sample magnetometer. Furthermore, the synthesized ZFGs are used to remove methylene blue (MB) dye, and the adsorption kinetics, isotherm, mechanism, and reusability of this nanomaterial are studied. The optimal ZFG nanocomposite had a dye removal percentage of almost 100%. The fitting model of adsorption kinetics followed the pseudo-second-order model. The isotherm model followed the Langmuir isotherm and the theoretical maximum adsorption capacity of optimal ZFG calculated by this model was 212.77 mg/g. The π-π stacking and electrostatic interaction resulted in a high adsorption efficiency of ZFG for MB adsorption. In addition, this nanocomposite could be separated by a magnet and maintain its dye removal percentage at almost 100% removal after eight cycles, which indicates its high suitability for utilization in water treatment.

Adsorption of Reactive Red 195 from aqueous medium using Lotus (Nelumbo nucifera) leaf powder chemically modified with dimethylamine: characterization, isotherms, kinetics, thermodynamics, and mechanism assessment

NOVELTY STATEMENT

In the modern era, dyes are inevitable and their surging usage leads to colossal contamination of aqueous streams, thereby threatening both the land and aquatic species. One among such dye is anionic Reactive Red 195 (RR 195), and traceable even at minute concentrations of aqueous streams, posing a severe threat to living species. Moreover, RR 195 is highly recalcitrant offering resistance to biodegradation due to the presence of an azo (-N=N-) group within its structure. Thus, there is a definite need to address the issue of eliminating RR 195 from industrial wastewater effluents. In lieu of this, the primitive objective of this study is to test the effectiveness of the natural adsorbent lotus leaf (Nelumbo nucifera) for the selective sorption of RR 195 from the aqueous stream. Although ample literature is available on the direct utilization of lotus leaf as adsorbent, yet no study was performed on the chemical modification (dimethylamine) of the aforementioned adsorbent. Hence, an attempt has been made in this direction to add a new sorbent into the adsorbents database.

Adsorption of Indigo Carmine dye onto the surface-modified adsorbent prepared from municipal waste and simulation using deep neural network

A new adsorbent was prepared from municipal wastes (a mixture of Corn Stover, Paper Waste, and Yard Waste) by cationization with 3 ̶ Chloro ̶ 2 ̶ Hydroxypropyl Trimethylammonium Chloride. The FTIR spectrum confirmed the quaternary ammonium group's presence on the adsorbent surface (1450 cm^-1). The maximum adsorption capacity (148 mg/g) was higher than the earlier reported values. Liu isotherm described well the adsorption process, with a high R²_adj value (0.997). The pseudo-first-order equation fits well for kinetic data, and thermodynamic experiments demonstrated the endothermic nature of the adsorption. The deep neural network (DNN) is applied to simulate the adsorption process, which outperformed the classical machine learning and shallow neural network models. The DNN model predicted accurately the adsorption process with the lowest deviation from the actual values with Mean Absolute Error (MAE = 3.2), Root Mean Squared Error (RMSE = 4.89), and the highest performance accuracy of R² (0.96) as compared to various classical ML algorithms such as Linear Regressions (MAE = 12.53, RMSE = 18.01, R² = 0.42), Random Forest (MAE = 5.81, RMSE = 10.05, R² = 0.82), and Extra Trees (MAE = 4.35, RMSE = 8.22, R² = 0.88). The utilized DNN model can be used for predicting the removal efficiency of dyes for various combinations of input parameters without going through laboratory experiments.

Facile preparation of robust dual MgO-loaded carbon foam as an efficient adsorbent for malachite green removal

This study developed a facile approach for the fabrication of dual MgO-loaded carbon foam (DMCF) via carbonization of a cured MgO/cyanate ester resin mixture, which underwent self-foaming of the resin followed by the carbothermal reduction of MgO. The features of the prepared DMCF prepared were characterized by FESEM, TEM, XRD, FTIR, XPS and so on, and the effects of adsorption conditions, adsorption isotherms, kinetics, and thermodynamics on malachite green (MG) removal using the DMCF as adsorbents were investigated through batch adsorption experiments. Results demonstrate that the DMCF possesses a unique dual loading of MgO particles which are not only loaded onto its foam walls but also filled within the walls with a graphene-wrapped core-shell structure. The experimental maximum adsorption capacity of MG reaches up to 1874.18 mg/g with a partition coefficient of 10.87 mg/g/μM. The adsorption process can be better described with Langmuir, pseudo-second-order, and intraparticle diffusion models. Moreover, the DMCF exhibits a removal percentage of 84.85% after five reuses, indicating that it is an efficient and promising adsorbent for MG adsorption.

Cyclodextrin Polymers and Cyclodextrin-Containing Polysaccharides for Water Remediation

Chemical pollution of water has raised great concerns among citizens, lawmakers, and nearly all manufacturing industries. As the legislation addressing liquid effluents becomes more stringent, water companies are increasingly scrutinized for their environmental performance. In this context, emergent contaminants represent a major challenge, and the remediation of water bodies and wastewater demands alternative sorbent materials. One of the most promising adsorbing materials for micropolluted water environments involves cyclodextrin (CD) polymers and cyclodextrin-containing polysaccharides. Although cyclodextrins are water-soluble and, thus, unusable as adsorbents in aqueous media, they can be feasibly polymerized by using different crosslinkers such as epichlorohydrin, polycarboxylic acids, and glutaraldehyde. Likewise, with those coupling agents or after substituting hydroxyl groups with more reactive moieties, cyclodextrin units can be covalently attached to a pre-existing polysaccharide. In this direction, the functionalization of chitosan, cellulose, carboxymethyl cellulose, and other carbohydrate polymers with CDs is vastly found in the literature. For the system containing CDs to be used for remediation purposes, there are benefits from a synergy that arises from (i) the ability of CD units to interact selectively with a broad spectrum of molecules, forming inclusion complexes and higher-order supramolecular assemblies, (ii) the functional groups of the crosslinker comonomers, (iii) the three-dimensional structure of the crosslinked network, and/or (iv) the intrinsic characteristics of the polysaccharide backbone. In view of the most recent contributions regarding CD-based copolymers and CD-containing polysaccharides, this review discusses their performance as adsorbents in micropolluted water environments, as well as their interaction patterns, addressing the influence of their structural and physicochemical properties and their functionalization.

Enhanced adsorption of methylene blue from textile wastewater by using natural and artificial zeolite

This study investigated the adsorption of methylene blue with natural and artificial zeolite. The effect of pH, contact time, initial concentration and adsorbent dose on adsorption was also investigated. An artificial dye was prepared. Adsorption removal efficiency was low at pH = 2, 3 and 4 but it was quite high at pH = 7. It was determined that the contact time reaches equilibrium within 60 minutes in the adsorption of methylene blue with natural and artificial zeolite. The initial dyestuff concentration for both adsorbents was 5 mg/L. For the removal of methylene blue, a 0.5 g natural and artificial zeolite dosage was sufficient. In order to express the adsorption of natural and artificial zeolite on methylene blue, Langmuir, Freundlich, Temkin and Dubinin-Radushkevich (D-R) isotherm models were examined. In the isotherm study, both natural and artificial zeolite adapted to the Langmuir isotherm model. Langmuir correlation coefficient was 0.998 for artificial zeolite and 0.993 for natural zeolite. Both adsorbent materials best fit into the pseudo-second kinetic model with similar correlation coefficient values of 0.999.

High porous electrospun poly(ε-caprolactone)/gelatin/MgO scaffolds preseeded with endometrial stem cells promote tissue regeneration in full-thickness skin wounds: An in vivo study

In the current study, electrospun poly(ε-caprolactone)-gelatin (PCL-Gel) fibrous scaffolds containing magnesium oxide (MgO) particles and preseeded with human endometrial stem cells (hEnSCs) were developed to use as wound care material in skin tissue engineering applications. Electrospun fibers were fabricated using PCL-Gel (1:1 [wt/wt]) with different concentrations of MgO particles (1, 2, and 4 wt%). The fibrous scaffolds were evaluated regarding their microstructure, mechanical properties, surface wettability, and in vitro and in vivo performances. The full-thickness excisional wound model was used to evaluate the in vivo wound healing ability of the fabricated scaffolds. Our findings confirmed that the wounds covered with PCL-Gel fibrous scaffolds containing 2 wt% MgO and preseeded with hEnSCs have nearly 79% wound closure ability while sterile gauze showed 11% of wound size reduction. Our results can be employed for biomaterials aimed at the healing of full-thickness skin wounds.

Egg By-Products as a Tool to Remove Direct Blue 78 Dye from Wastewater: Kinetic, Equilibrium Modeling, Thermodynamics and Desorption Properties

Eggshell, a waste material from food manufacturing, can be used as a potential ecofriendly adsorbent for the elimination of textile dyes from water solutions. The adsorption process was evaluated varying factors such as initial dye load, contact time, pH, quantity of adsorbent, and temperature. The initial dye load (Direct Blue 78) was in the range of 25–300 mg/L. The kinetics of adsorption were analyzed using different models, such as pseudo-first-order, pseudo-second-order, and intraparticle diffusion model. Also, the experimental data at equilibrium were studied using Freundlich, Langmuir, and Temkin isotherms. The kinetics followed pseudo-second-order, then pseudo-first-order, and finally the model of intraparticle diffusion. The results obtained for data at equilibrium follow the order: Freundlich > Langmuir > Temkin. The adsorption equilibrium showed a maximum capacity of adsorption (q_max) of 13 mg/g at pH 5, and using 0.5 g of eggshell. Dye adsorption was enhanced with increasing temperatures. The thermodynamic study revealed the spontaneity and endothermic nature of the adsorption process. The desorption study shows that the eggshell could be reused in different adsorption/desorption cycles. A novel advanced oxidation process could degrade more than 95% of the dye. The results show that eggshell is a waste material useful to remove hazardous dyes from wastewater, which may alleviate the environmental impact of dyeing industries.

Application of solid waste of ductile cast iron industry for treatment of wastewater contaminated by reactive blue dye via appropriate nano-porous magnesium oxide

The solid waste of ductile iron industry, which contains at least 88.0% magnesium oxide, is one of the toxic materials, leading to land contamination. On the other hand, the removal of reactive dyes from wastewaters is difficult required effective adsorbent like nano-porous MgO. The novelty of present investigation is based on nano-porous magnesium oxide production by precipitation from the solid waste to treat the wastewaters contaminated by reactive dye which is abundantly used in the textile industry. In order to improve the adsorptive properties of extracted MgO powder, the combinations of surfactants, containing cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and polyoxyethylene octyl phenyl ether (TX100) were applied based on the mixture design algorithm in the precipitation. The effects of processing factors such as surfactant composition, powder calcination temperature, surfactant dose and pH were evaluated on the removal efficiency. The results revolved that the combination of SDS and TX100, 1:1, plays an effective role in the production of particles with the appropriate average pore size, 16 nm. The adsorbent prepared in the optimum condition indicated a significant affinity for the removal of reactive dye which shows relatively pH-independent efficiency in the range of 3-9. The applied producer for fabrication of adsorbent eventually overcomes the pH-dependent problem for the toxic dye uptake, leading to produce the adsorbent with maximal adsorption capacity of 1000 mg g^-1.

Synthesis and characterization of cobalt nanoparticles for application in the removal of textile dye

In this work, magnetic cobalt nanoparticles (CoNPs) were synthesized and applied to the removal of Remazol golden yellow RNL (RGY) from aqueous solutions and textile wastewater. The CoNPs were characterized and the Co content found in the CoNPs was 60.38% (m/m). The analysis of X-ray Diffraction (XRD) and Raman Spectroscopy indicated the presence of Co⁰ and CoO in the composition of the material, as confirmed by Thermogravimetric Analysis coupled to Mass Spectrometry (TG-MS). Images obtained by the Transmission Electron Microscope (TEM) showed that the CoNPs have sizes smaller than 10 nm, sphere morphology and high agglomeration capacity. The results obtained by nitrogen adsorption-desorption suggested that the nanomaterial presented a mesoporous characteristic, low specific surface area (15.70 m² g^-1) and a pore volume and pore diameter of 0.072 cm³ g^-1 and 3.64 nm, respectively. CoNPs removed the RGY with high efficiency, reaching almost 100% removal in 30 min. The kinetic results showed that the reaction followed pseudo-second-order kinetics. Additionally, the removal process can be altered depending on the experimental condition. For instance, under acidic conditions, the reductive degradation prevailed, while in neutral or basic conditions, two simultaneous processes occur: reductive degradation and adsorption. Finally, CoNPs were applied to textile wastewater. The results showed high discoloration, reaching almost 88%. However, there was only a 32% decrease in chemical oxygen demand, showing that CoNPs are efficient at removing organic dyes from aqueous solutions.

Adsorption of Direct Blue 78 Using Chitosan and Cyclodextrins as Adsorbents

The dyeing industry is one of the most polluting in the world. The adsorption of dyes by polymeric matrixes can be used to minimize the discharge of dyes into the environment. In the present study, chitosan-NaOH and β-cyclodextrin-epichlorohydrin polymers were used to remove the dye Direct Blue 78 from a wastewater model. To understand the adsorption behavior of Direct Blue 78 onto the polymers, adsorption rate and maximum adsorption capacity were calculated using kinetic tests and isotherm curves respectively. The kinetic data and mechanism of the adsorption process were analyzed by three models and the equilibrium data by three adsorption isotherms; also the different thermodynamic parameters were calculated. Results showed that the adsorption process follows pseudo-second-order kinetics in both polymers and the Langmuir isotherm best-fitted data for chitosan-NaOH polymer and the Freundlich isotherm for the β-CDs-EPI polymer. The adsorption process is exothermic in both cases and spontaneous for the β-CDs-EPI polymer to a certain temperature and not spontaneous for the chitosan-NaOH polymer and β-CDs-EPI polymer at higher temperatures. The complementary action of an advanced oxidation process eliminated >99% of the dye from water. The coupled process seems to be suitable for reducing the environmental impact of the dyeing industry.

Hexadecyltrimethylammonium Bromide Surfactant-Supported Silica Material for the Effective Adsorption of Metanil Yellow Dye

The adsorption behavior of an organic dye, metanil yellow (My), from water using micro-nano silica particles (MNSPs) was investigated. MCM-41-like (Mobil Composition of Matter No. 41) MNSPs were synthesized using tetraethoxy orthosilicate as a silica source and hexadecyltrimethylammonium bromide (CTAB) as a surfactant under basic conditions. Comparative studies were performed to assess the adsorption behaviors of the organic dye using the as-synthesized MCM-41 before the removal of CTAB and MCM-41, either after one, two, and three times of chemical etching or after calcination. My was adsorbed more effectively from water on the as-synthesized MCM-41 without the removal of the surfactant than on MCM-41 after the removal of the surfactant by chemical etching or calcination. In addition, MCM-41 after removing the surfactant by one-time chemical etching in the presence of hydrochloric acid also showed better adsorption of My from water than MCM-41 after removing the surfactant by further two and three times of chemical etching or calcination. For comparison, other kinds of dye molecules with different chemical structures such as methylene blue (Mb) and rhodamine B (Rb) were also used to check the possibility of adsorption of various dyes by the CTAB-supported MNSPs. To better understand the reason behind the adsorption phenomena, detailed studies on the kinetics and thermodynamics of adsorption of the MNSPs were performed. Excellent adsorption of My was observed at concentrations up to 100 mg L^-1 at 25 °C, whereas the adsorption was lower at higher concentrations of the My dye. Furthermore, enhanced My dye adsorption was observed at higher concentrations by increasing the adsorption temperature. It can be concluded that the MNSPs exhibited efficient adsorption of My, when the MNSPs are used without the removal of the surfactant and any further modifications, suggesting that the surfactant played key roles in the effective adsorption of the anionic dye. The as-synthesized MCM-41 was, however, not a good adsorbent for cationic dyes such as Mb and Rb.

Adsorption of Tea Polyphenols using Microporous Starch: A Study of Kinetics, Equilibrium and Thermodynamics

Microporous starch (MPS) granules were formed by the partial hydrolysis of starch using α–amylase and glucoamylase. Due to its biodegradability and safety, MPS was employed to adsorb tea polyphenols (TPS) based on their microporous characteristics. The influences of solution pH, time, initial concentration and temperature on the adsorptive capacity were investigated. The adsorption kinetics data conformed to the pseudo second–order kinetics model, and the equilibrium adsorption data were well described by the Langmuir isotherm model. According to the fitting of the adsorption isotherm formula, the maximum adsorption capacity of TPS onto MPS at pH 6.7 and T = 293 K was approximately 63.1 mg/g. The thermodynamic parameters suggested that the adsorption of TPS onto MPS was spontaneous and exothermic. Fourier transform infrared (FT–IR) analysis and the thermodynamics data were consistent with a physical adsorption mechanism. In addition, MPS-loaded TPS had better stability during long-term storage at ambient temperature.

A solid-state chemical method for synthesizing MgO nanoparticles with superior adsorption properties

As a traditional and effective adsorbent, MgO is a low-cost, eco-friendly, nontoxic, and economical material for wastewater treatment. However, multistep processing and the use of organic agents result in high costs and lead to environmental pollution, strongly inhibiting the practical application of MgO. Herein, a simple solid-state chemical route has been used to prepare small-sized MgO nanoparticles with a large specific surface area of 213 m2 g-1 without using liquid solvents, template agents, or surfactants. This facile method is a green strategy that is suitable for large-scale production, avoiding complex preparation processes and serious environmental pollution. The obtained small-sized MgO nanoparticles showed a superior adsorption capacity of 2375 mg g-1 towards Congo red, originating from the large specific surface area and surface features (hydrogen bonds and electrostatic interactions). The adsorption behavior obeyed a pseudo-second-order rate equation and the Langmuir isotherm adsorption model. This study provides a route for the synthesis of oxides with large specific surface areas and obtained an adsorbent with superior adsorption capacity.

Effect of Zinc Acetate Concentration on Optimization of Photocatalytic Activity of p-Co3O4/n-ZnO Heterostructures

In this work, p-Co₃O₄/n-ZnO heterostructures were fabricated on Ni substrate by hydrothermal-decomposition method using cobaltous nitrate hexahydrate (Co(NO₃)₂·6H₂O) and zinc acetate dihydrate (Zn(CH₃COO)₂·2H₂O) as precursors with zinc acetate concentration varying from 5.0 to 55.0 mM. Structure and morphology of the developed samples were characterized by X-ray diffraction (XRD), Raman spectroscopy, and scanning electron microscopy (SEM). Effect of zinc acetate concentration on the photocatalytic activity of p-Co₃O₄/n-ZnO heterostructures was investigated by degradation of methyl orange (MO) under the UV light irradiation. The fabricated p-Co₃O₄/n-ZnO heterostructures exhibited higher photocatalytic activity than pure Co₃O₄ particles. In order to obtain the maximum photocatalytic activity, zinc acetate concentration was optimized. Specifically, at 35 mM of zinc acetate, the p-Co₃O₄/n-ZnO showed the highest photocatalytic activity with the degradation efficiency of MO reaching 89.38% after 72 h irradiation. The improvement of photocatalytic performance of p-Co₃O₄/n-ZnO heterostructures is due to the increased concentration of photo-generated holes on Co₃O₄ surface and the higher surface-to-volume ratio in the hierarchical structure formed by nano-lamellas.

Preparation of Starch-Hard Carbon Spherules from Ginkgo Seeds and Their Phenol-Adsorption Characteristics

Carbon spherules from ginkgo seed starch were prepared through stabilization and carbonization processes. The ginkgo seed starch was first stabilized at 195 °C for 18 h, then carbonized at 500 °C for 2 h under an N₂ atmosphere. The characterization results confirmed that carbon spherules were in the size range of 10–20 μm. Experimental data were also evaluated to find out the kinetic characteristics of phenols on the carbon spherules during the adsorption process. Adsorption processes for phenol, p-nitrophenol and p-chlorophenol were found to follow the pseudo-first order kinetic model with R² values of 0.995, 0.997 and 0.998, while the rate constants k₁ = 0.014, 0.009 and 0.011 min⁻¹ showed that the adsorption is mainly controlled by adsorbate diffusion. The equilibrium data were analyzed with the Langmuir, Freundlich and Temkin–Pyzhev models and the best fit was observed with the Freundlich isotherm, suggesting the physical adsorption of phenols. From the thermodynamic functions, ∆G, ∆H, and ∆S were calculated, which showed that adsorption is more favorable at low temperature and is an exothermic process, and the adsorption of p-nitrophenol and p-chlorophenol were more advantageous than that of phenol.

The adsorption features between insecticidal crystal protein and nano-Mg(OH)2

Nano-Mg(OH)₂, with low biological toxicity, is an ideal nano-carrier for insecticidal protein to improve the bioactivity. In this work, the adsorption features of insecticidal protein by nano-Mg(OH)₂ have been studied. The adsorption capacity could reach as high as 136 mg g^-1, and the adsorption isotherm had been fitted with Langmuir and Freundlich models. Moreover, the adsorption kinetics followed a pseudo-first or -second order rate model, and the adsorption was spontaneous and an exothermic process. However, high temperatures are not suitable for adsorption, which implies that the temperature would be a critical factor during the adsorption process. In addition, FT-IR confirmed that the protein was adsorbed on the nano-Mg(OH)₂, zeta potential analysis suggested that insecticidal protein was loaded onto the nano-Mg(OH)₂ not by electrostatic adsorption but maybe by intermolecular forces, and circular dichroism spectroscopy of Cry11Aa protein before and after loading with nano-Mg(OH)₂ was changed. The study applied the adsorption information between Cry11Aa and nano-Mg(OH)₂, which would be useful in the practical application of nano-Mg(OH)₂ as a nano-carrier.

Adsorption of Congo red dye onto antimicrobial terephthaloyl thiourea cross-linked chitosan hydrogels

Adsorption capacity of three antimicrobial terephthaloyl thiourea cross-linked chitosan hydrogels for Congo red dye removal from its aqueous solution has been investigated for the first time in this work. These hydrogels were prepared by reacting chitosan with various amounts of terephthaloyl diisothiocyanate cross-linker. The effect of the hydrogel structural variations and several dye adsorption processing parameters to achieve the best adsorption capacity were investigated. The hydrogels' structural variations were obtained by varying their terephthaloyl thiourea moieties content. The processing variables included initial concentration of the dye solution, temperature and time of exposure to the dye. The adsorption kinetics and isotherms showed that the sorption processes were better fitted by the pseudo-second-order equation and the Langmuir equation, respectively. On the basis of the Langmuir analysis Congo red dye gave the maximum sorption capacity of 44.248 mg/g. The results obtained confirmed that the sorption phenomena are most likely to be controlled by chemisorption process. The adsorption reaction was endothermic and spontaneous according to the calculated results of adsorption thermodynamics.