Surface chemistry of enamel apatite during maturation in relation to pH: implications for protein removal and crystal growth

Highly acidic pH facilitates enamel protein self-assembly, apatite crystal growth and enamel protein interactions in the early enamel matrix

Tooth enamel develops within a pH sensitive amelogenin-rich protein matrix. The purpose of the present study is to shed light on the intimate relationship between enamel matrix pH, enamel protein self-assembly, and enamel crystal growth during early amelogenesis. Universal indicator dye staining revealed highly acidic pH values (pH 3-4) at the exocytosis site of secretory ameloblasts. When increasing the pH of an amelogenin solution from pH 5 to pH 7, there was a gradual increase in subunit compartment size from 2 nm diameter subunits at pH 5 to a stretched configuration at pH6 and to 20 nm subunits at pH 7. HSQC NMR spectra revealed that the formation of the insoluble amelogenin self-assembly structure at pH6 was critically mediated by at least seven of the 11 histidine residues of the amelogenin coil domain (AA 46-117). Comparing calcium crystal growth on polystyrene plates, crystal length was more than 20-fold elevated at pH 4 when compared to crystals grown at pH 6 or pH 7. To illustrate the effect of pH on enamel protein self-assembly at the site of initial enamel formation, molar teeth were immersed in phosphate buffer at pH4 and pH7, resulting in the formation of intricate berry tree-like assemblies surrounding initial enamel crystal assemblies at pH4 that were not evident at pH7 nor in citrate buffer. Amelogenin and ameloblastin enamel proteins interacted at the secretory ameloblast pole and in the initial enamel layer, and co-immunoprecipitation studies revealed that this amelogenin/ameloblastin interaction preferentially takes place at pH 4-pH 4.5. Together, these studies highlight the highly acidic pH of the very early enamel matrix as an essential contributing factor for enamel protein structure and self-assembly, apatite crystal growth, and enamel protein interactions.

Pb(II)-mediated precipitate transformation promotes Cr(VI) immobilization by biogenic hydroxyapatite

In this work, the mechanism of Pb(II)-mediated precipitation transformation to improve the removal of Cr(VI)-oxyanion on biogenic hydroxyapatite (BHAp) were investigated. The Pb(II)-preloading formed pyromorphite [Pb₅(PO₄)₃Cl] precipitate on the BHAp surface (Pb@BHAp), thus causing an increase of 2.2 times in the uptake of Cr(VI) by Pb@BHAp at pH of 2.4. It was primarily due to the dissolution of Pb₅(PO₄)₃Cl accompanied with the release of Pb(II), resulting in the rapid formation of crocoite (PbCrO₄). Although the K_sp of Pb₅(PO₄)₃Cl was approximately 23 orders of magnitude lower than that of PbCrO₄, Pb(II)-mediated precipitation transformation could still occur. XRD and SEM-EDX analyses demonstrated that the process was a time-dependent that included rapid crystal precipitation in the initial 10 min and subsequent precipitate accumulation for several hours. The Pb(II) released from the dissolution of Pb₅(PO₄)₃Cl was immediately immobilized by Cr(VI); therefore, it did not cause any retention risk of Pb(II) in the solution. Furthermore, a small quantity of Cr(VI) could be reduced to Cr(III) by BHAp, and Cr(III) could enter into the BHAp lattice for the exchange of Ca(II). This study provides a new insight into the resource utilization of Pb-bearing BHAp and a potential method for the successive removal of Pb(II) and Cr(VI).

Ultrastructural changes of bovine tooth surfaces under erosion in presence of biomimetic hydroxyapatite

Enamel and dentin are susceptible to acids from food sources leading to dental erosion, a global problem affecting millions of individuals. Particulate hydroxyapatite (HAP) on the tooth surface can influence the effects of acid attacks. Standardized bovine enamel and dentin samples with artificial saliva are used in an in vitro cyclic demineralization–remineralization protocol to analyze the structural changes experienced by tooth surfaces using high-resolution scanning electron microscopy and to evaluate the potential of a HAP-based oral care gel in the protection of teeth from erosive attacks. The interfaces between HAP particle and enamel HAP crystallites are investigated using focused ion beam preparation and transmission electron microscopy. The results show that erosion with phosphoric acid severely affects enamel crystallites and dentin tubules, while artificial saliva leads to remineralization effects. The HAP-gel forms a microscopic layer on both enamel and dentin surfaces. Upon acid exposure, this layer is sacrificed before the native tooth tissues are affected, leading to significantly lower degrees of demineralization compared to the controls. This demonstrates that the use of particulate HAP as a biomaterial in oral care formulations can help protect enamel and dentin surfaces from erosive attacks during meals using a simple and effective protection principle.

Frequency of molar incisor hypomineralization and associated factors among children with special health care needs

BACKGROUND

Molar incisor hypomineralization (MIH) is a frequently encountered oral condition that varies from mild opacities to posteruptive enamel breakdown. No previous published studies have investigated the frequency of MIH and associated risk factors among children with special health care needs (CSHCN) to our awareness.

OBJECTIVES

Assess the frequency of MIH and associated risk factors among CSHCN.

DESIGN

Cross-sectional.

SETTING

Schools in provincial city of Saudi Arabia.

PATIENTS AND METHODS

The study was conducted among 400 (180 boys and 220 girls) special needs children. Diagnosis of MIH was according to the European Academy of Paediatric Dentistry criteria.

MAIN OUTCOME MEASURE

Result of logistic regression analysis that assessed the association between MIH prevalence and associated prenatal, perinatal, and postnatal factors.

SAMPLE SIZE

400 (180 boys and 220 girls) special needs children.

RESULTS

Among 400 CSHCN, 98 (24.5%) presented with MIH. Children with multiple disabilities had a 3.89 times greater risk of MIH (95% CI: 1.91-6.19, P=.002). Children with positive prenatal factors had an adjusted odds ratio (aOR) of 2.31 times for MIH (95% CI: 1.22-4.73, P=.012). Children with a childhood infection history had an aOR of 2.43 times for MIH (95% CI: 1.31-5.85, P=.014). Children with a breastfeeding history >18 months had an aOR of 3.73 for MIH (95% CI: 1.62-8.60, P=.002). Permanent maxillary first molars were the most frequently affected teeth, and demarcated opacity was the most frequent MIH type.

CONCLUSION

MIH should be recognized as one of the prevalent oral health problems among CSHCN to prevent tooth mortality.

LIMITATIONS

A cross-sectional study cannot establish a causal relationship.

CONFLICTS OF INTEREST

None.

The geometrical structure of interfaces in dental enamel: A FIB-STEM investigation

In this study a high resolution structural analysis revealed that enamel prisms are surrounded by an interface that is discontinuous with frequent mineral to mineral contact separated by gaps. This contact manifests either by crystallites bridging the boundary between prismatic and interprismatic enamel or continuous crystallites curving and bridging the interprismatic enamel to the prisms. The geometrical resolution of this TEM investigation of the interfaces is ≤2 nm as a basis for micromechanical models. Within this resolution, contrary to existing structural descriptions of dental enamel structure in materials science literature, here the crystallites themselves are shown to be either in direct contact with each other, sometimes even fusing together, or are separated by gaps. Image analysis revealed that on average only 57 ± 15% of the interface consists of points of no contact between crystallites. This work reveals structural features of dental enamel that contribute important understanding to both the architecture and mechanical properties of this biological material. A new structural model is proposed and the implications for the mechanical properties of dental enamel are discussed. STATEMENT OF SIGNIFICANCE: In this study a high resolution structural analysis, employing focused ion beam and transmission electron microscopy revealed that enamel prisms are surrounded by interfaces that are discontinuous with frequent mineral to mineral contact separated by gaps. Although the interfaces in enamel have been investigated previously, existing studies are lacking in detail considering the geometry and morphology of the interfaces. We think that this result is of great importance when it comes to the understanding of the mechanical properties. In our opinion the concept of soft sheaths is no longer feasible. The resulting observations are included in a new structural model which provides new qualitative insights into the mechanical behavior. Existing analytical models were applied to simulate the new geometrical structure.

A crayfish molar tooth protein with putative mineralized exoskeletal chitinous matrix properties

Some crustaceans possess exoskeletons that are reinforced with calcium carbonate. In the crayfish Cherax quadricarinatus, the molar tooth, which is part of the mandibular exoskeleton, contains an unusual crystalline enamel-like apatite layer. As this layer resembles vertebrate enamel in composition and function, it offers an interesting example of convergent evolution. Unlike other parts of the crayfish exoskeleton, which is periodically shed and regenerated during the molt cycle, molar mineral deposition takes place during the pre-molt stage. The molar mineral composition transforms continuously from fluorapatite through amorphous calcium phosphate to amorphous calcium carbonate and is mounted on chitin. The process of crayfish molar formation is entirely extracellular and presumably controlled by proteins, lipids, polysaccharides, low-molecular weight molecules and calcium salts. We have identified a novel molar protein termed Cq-M15 from C. quadricarinatus and cloned its transcript from the molar-forming epithelium. Its transcript and differential expression were confirmed by a next-generation sequencing library. The predicted acidic pI of Cq-M15 suggests its possible involvement in mineral arrangement. Cq-M15 is expressed in several exoskeletal tissues at pre-molt and its silencing is lethal. Like other arthropod cuticular proteins, Cq-M15 possesses a chitin-binding Rebers-Riddiford domain, with a recombinant version of the protein found to bind chitin. Cq-M15 was also found to interact with calcium ions in a concentration-dependent manner. This latter property might make Cq-M15 useful for bone and dental regenerative efforts. We suggest that, in the molar tooth, this protein might be involved in calcium phosphate and/or carbonate precipitation.

Molar incisor hypomineralization, prevalence, and etiology

Aim. To evaluate the prevalence and possible etiological factors associated with molar incisor hypomineralization (MIH) among a group of children in Jeddah, Saudi Arabia. Methods. A group of 8-12-year-old children were recruited (n = 267) from the Pediatric Dental Clinics at the Faculty of Dentistry, King Abdulaziz University. Children had at least one first permanent molar (FPM), erupted or partially erupted. Demographic information, children's medical history, and pregnancy-related data were obtained. The crowns of the FPM and permanent incisors were examined for demarcated opacities, posteruptive breakdown (PEB), atypical restorations, and extracted FPMs. Children were considered to have MIH if one or more FPM with or without involvement of incisors met the diagnostic criteria. Results. MIH showed a prevalence of 8.6%. Demarcated opacities were the most common form. Maxillary central incisors were more affected than mandibular (P = 0.01). The condition was more prevalent in children with history of illnesses during the first four years of life including tonsillitis (P = 0.001), adenoiditis (P = 0.001), asthma (P = 0.001), fever (P = 0.014), and antibiotics intake (P = 0.001). Conclusions. The prevalence of MIH is significantly associated with childhood illnesses during the first four years of life including asthma, adenoid infections, tonsillitis, fever, and antibiotics intake.

Exploring the retention properties of CaF2 nanoparticles as possible additives for dental care application with tapping-mode atomic force microscope in liquid

Amplitude-modulation atomic force microscopy (AM-AFM) is used to determine the retention properties of CaF2 nanoparticles adsorbed on mica and on tooth enamel in liquid. From the phase-lag of the forced cantilever oscillation the local energy dissipation at the detachment point of the nanoparticle was determined. This enabled us to compare different as-synthesized CaF2 nanoparticles that vary in shape, size and surface structure. CaF2 nanoparticles are candidates for additives in dental care products as they could serve as fluorine-releasing containers preventing caries during a cariogenic acid attack on the teeth. We show that the adherence of the nanoparticles is increased on the enamel substrate compared to mica, independently of the substrate roughness, morphology and size of the particles.

Interactions between inorganic and organic phases in bone tissue as a source of inspiration for design of novel nanocomposites

Mimicking the nanostructure of bone and understanding the interactions between the nanoscale inorganic and organic components of the extracellular bone matrix are crucial for the design of biomaterials with structural properties and a functionality similar to the natural bone tissue. Generally, these interactions involve anionic and/or cationic functional groups as present in the organic matrix, which exhibit a strong affinity for either calcium or phosphate ions from the mineral phase of bone. This study reviews the interactions between the mineral and organic extracellular matrix components in bone tissue as a source of inspiration for the design of novel nanocomposites. After providing a brief description of the various structural levels of bone and its main constituents, a concise overview is presented on the process of bone mineralization as well as the interactions between calcium phosphate (CaP) nanocrystals and the organic matrix of bone tissue. Bioinspired synthetic approaches for obtaining nanocomposites are subsequently addressed, with specific focus on chemical groups that have affinity for CaPs or are involved in stimulating and controlling mineral formation, that is, anionic functional groups, including carboxyl, phosphate, sulfate, hydroxyl, and catechol groups.

The role of enamel proteins in protecting mature human enamel against acidic environments: a double layer force spectroscopy study

Characterisation of the electrostatic properties of dental enamel is important for understanding the interfacial processes that occur on a tooth surface and how these relate to the natural ability of our teeth to withstand chemical attack from the acids in many soft drinks. Whereas, the role of the mineral component of the tooth enamel in providing this resistance to acid erosion has been studied extensively, the influence of proteins that are also present within the structure is not well understood. In this paper, we report for the first time the use of double-layer force spectroscopy to directly measure electrostatic forces on as received and hydrazine-treated (deproteinated) enamel surfaces in solutions with different pH to determine how the enamel proteins influence acid erosion surface potential and surface charge of human dental enamel. The deproteination of the treated samples was confirmed by the loss of the amide bands (~1,300-1,700 cm(-1)) in the FTIR spectrum of the sample. The force characteristics observed were found to agree with the theory of electrical double layer interaction under the assumption of constant potential and allowed the surface charge per unit area to be determined for the two enamel surfaces. The values and, importantly, the sign of these adsorbed surface charges indicates that the protein content of dental enamel contributes significantly to the electrostatic double layer formation near the tooth surface and in doing so can buffer the apatite crystals against acid attack. Moreover, the electrostatic interactions within this layer are a driving factor for the mineral transfer from the tooth surface and the initial salivary pellicle formation.

Interactions of hydroxyapatite surfaces: conditioning films of human whole saliva

Hydroxyapatite is a very interesting material given that it is the main component in tooth enamel and because of its uses in bone implant applications. Therefore, not only the characterization of its surface is of high relevance but also designing reliable methods to study the interfacial properties of films adsorbed onto it. In this paper we apply the colloidal probe atomic force microscopy method to investigate the surface properties of commercially available hydroxyapatite surfaces (both microscopic particles and macroscopic discs) in terms of interfacial and frictional forces. In this way, we find that hydroxyapatite surfaces at physiological relevant conditions are slightly negatively charged. The surfaces were then exposed to human whole saliva, and the surface properties were re-evaluated. A thick film was formed that was very resistant to mechanical stress. The frictional measurements demonstrated that the film was indeed highly lubricating, supporting the argument that this system may prove to be a relevant model for evaluating dental and implant systems.

'Magic bullets' for bone diseases: progress in rational design of bone-seeking medicinal agents

An ideal therapeutic agent for bone diseases should act solely on bone tissue with no pharmacological activity at other anatomical sites. Current therapeutic agents, however, do not usually display a preferential affinity to bones and non-specifically distribute throughout the body after administration. Attempts to design bone-specific agents have relied on engineering a desired therapeutic agent with bone-seeking molecules so that the latter delivers the therapeutic agents specifically to bones. In this critical review, we summarize the latest attempts to engineer bone-seeking therapeutic agents based on formulating therapeutic agents with bisphosphonates, a class of compounds with high affinity to biological apatite. We first provide a relevant summary of the structure of bone mineral and bisphosphonates, highlighting the mode of interaction between these two entities. The use of bisphosphonates in the diagnosis of bone diseases is then presented, since this application helps us to understand the bone-carrier properties of bisphosphonates under physiological conditions. A summary of recent attempts to formulate bisphosphonates with traditional therapeutic agents to restrict their activities to bone tissues is then provided, with special emphasis on the structure-function relationships of the engineered compounds. Finally, attempts to use bisphosphonates to deliver macromolecular therapeutics (i.e., proteins) are summarized, based on recent data from the authors' lab. The collective research into bone-seeking medicinal agents is progressively laying the foundation for next-generation 'magic bullets' that display desirable activities at the disease sites with no undesirable activity on other organ systems. (164 references.).

The effects of fluoride on the nanostructure and surface pK of enamel crystals: an atomic force microscopy study of human and rat enamel

Atomic force microscopy (AFM) studies have revealed 30-40 nm-wide regular positively charged bands across maturation-stage rat enamel crystals. Low pH resolved these into positively charged spherical domains of approximately 30 nm diameter. Crystal surface pK values from adhesion force titrations were approximately 6.5. The effect of fluoride on this pK value and on the nanostructure of fluorosed human enamel crystals has not been reported. The nanostructure and surface chemistry (pK) of normal and fluorotic human and of fluoride-treated rat maturing enamel crystals was examined. Enamel was sectioned and polished, prior to examination, using AFM in height and friction modes. High-resolution height images revealed 30 nm-diameter spherical domains within crystals, arranged as layers of hexagons or as a shallow spiral. Fluorotic enamel showed similar, but less well ordered, nanodomains. These could represent an arrangement of original initiation sites or binding sites for modulating matrix proteins. Surface pK was derived from adhesion-force measurements between functionalized tips (OH or COOH) and crystal surfaces between pH 2 and pH 10. pK values of approximately 6.5 for normal crystals were reduced to approximately 5.5 after fluoride treatment. Reduction in surface pK by fluoride might indicate lowered protonation with possible effects on matrix protein binding.