Organic solvent-tolerant enzymes

Synergistic effects of distinct arabinofuranosidase specificities in lignocellulose degradation by different hemicellulases

Arabinoxylan is a prevalent hemicellulose type, notably heterogeneous and resistant to biodegradation. Arabinofuranosidases (Abfs) remove arabinofuranosyl decorations of arabinoxylan, thus enabling hydrolysis by xylanases. However, a variety of Abf and xylanase specificities have emerged in recent years, necessitating a deeper understanding of their role in biomass degradation. This work investigates the biochemical features of TtAbf43 from Thermothelomyces thermophila, which specifically removes the O-3-linked arabinofuranose moieties from di-substituted xylopyranoses. The enzyme also exhibited secondary hydrolytic activity on o-nitrophenyl-β-d-xylopyranoside and arabinan. The hydrolysis of pretreated wheat and corn bran substrates was assessed using TtAbf43 and AnAbf51, two enzymes with distinct catalytic specificities. The Abfs enhanced the performance of endo-xylanases TmXyn10 and AnXyn11, promoting the release of xylo-oligomers, while the xylanases, in turn, stimulated arabinose release by the Abfs. Additionally, the Abfs facilitated the endo- and exo-activities of the bifunctional xylobiohydrolase/glucuronoxylanase TtXyn30A for the release of xylobiose and short aldouronic acids from biomass. AnAbf51 also acted in synergy with the acetyl xylan esterase OCE6 and the exo-deacetylase TtCE16B in debranching enzymatically derived oligomers from lignocellulose, whereas TtAbf43 remained unaffected by the esterases. These diverse synergistic relationships among different hemicellulases could assist the development of new enzymatic approaches for efficient biomass valorization.

Redox and solvent-stable alkaline serine protease from Bacillus patagoniensis DB-5: heterologous expression, properties, and biotechnological applications

The aprBP gene from Bacillus patagoniensis DB-5, encoding a 378-amino-acid alkaline protease, was cloned and expressed in Escherichia coli. The amino acid sequence of APrBP showed 62.8-84.4% identity with the S8 peptidase subtilisin family alkaline proteases reported in the literature. Recombinant APrBP was purified using Ni-NTA affinity chromatography with 45.61% recovery and a homogeneous band was detected at approximately 38 kDa on the SDS-PAGE gel. The optimum temperature of APrBP was 60°C. The presence of 2 mM Ca2+ significantly enhanced the optimal temperature and thermostability. The enzyme demonstrated optimum activity at pH 12 and maintained high stability at pH 8.0-11.0. Protease activity was stimulated by Mn2+, Ca2+, Mg2+, Ni2+, TritonX-100, Tween-20 and Tween-80, while completely inactivated by PMSF, EDTA and Cu2+. The APrBP exhibited good tolerance to oxidizing and reducing agents. Notably, the protease exhibited remarkable stability in 50% (v/v) concentrations of several organic solvents, such as methanol, acetone, glycerol, dimethyl sulfoxide, n-hexane, and ethyl acetate. The APrBP efficiently hydrolyzed natural proteins, demonstrating the highest catalytic efficiency for casein, excellent hydrolysis activity for bovine serum albumin, hemoglobin, and keratin, and favorable hydrolysis ability for whey proteins. Moreover, molecular docking results revealed stable interactions between APrBP and casein, hemoglobin, whey proteins and keratin. This study indicated that APrBP has some useful properties and explored its potential as a bio-additive detergent as well as in utilizing feather waste and whey protein.

Selective Decarboxylative Fluorination of β-Keto Acids in Aqueous Media: 19F-NMR-Assisted Batch Optimization and Transfer to Continuous Flow

The selective decarboxylative fluorination of 3-oxo-3-phenylpropionic acid is used as a benchmark reaction to optimize it under biocompatible conditions in batch and to transfer it to continuous flow mode. The reaction conditions are varied with respect to temperature, fluorinating reagents, inorganic base additives, and pH, as these parameters have been identified as having a significant impact on the process. The formation of the products and any by-products is analyzed using gas chromatography (GC) and 19F nuclear magnetic resonance spectroscopy (NMR). Once optimal conditions have been determined, the reaction is carried out using an automated continuous laboratory synthesis system that features a mesostructured capillary reactor and an integrated 19F-NMR spectrometer for real-time monitoring of the reaction. The work presented here represents the initial phase of a multi-step continuous flow process that will include additional biocatalyzed downstream reactions in future applications.

Alkaline Proteases from Rose Snapper (Lutjanus guttatus): Evaluation of Their Stability to Chemical Denaturants and Potential Application to Hydrolyze Seafood Waste Proteins

Large quantities of by-products are generated after processing of rose snapper (Lutjanus guttatus), such as viscera, head, tail, skin, and bones, which are considered a potential source of valuable molecules. Therefore, the aim of the present study was the biochemical characterization of alkaline proteases isolated from the intestines of L. guttatus and the evaluation of their stability against different chemical denaturants (salts, surfactants/reducing agents, organic solvents, and commercial detergent formulations). In addition, the efficiency to hydrolyze proteins from rose snapper wastes (head, tail, skin, and muscle trimmings) by Alcalase® and alkaline protease extract (APE) isolated from Lutjanus guttatus intestine was evaluated. The APE exhibited a maximum activity at pH 12 and 45 °C and high stability at pH and temperature ranges from 9 to 12 and 10 to 40 °C, respectively. Assays with specific protease inhibitors indicated that trypsin and chymotrypsin are the main types of proteases in APE. An 80% of the proteolytic activity was retained in the presence of 25% NaCl and was stable in the presence of the reducing agent DTT; however, it lost around 70% of proteolytic activity in the presence of 2-mercaptoethanol. The enzymatic activity of APE was maintained above 60% in methanol, ethanol, and propanol as well as in liquid commercial detergents. Alkaline proteases from rose snapper exhibited higher hydrolytic efficiency, compared to the microbial enzyme Alcalase when protein from L. guttatus wastes were hydrolyzed. According to these results, the integral exploitation of rose snapper could be reached by proper usage of its by-products, creating a baseline to promote circular economy.

Active Site Studies to Explain Kinetics of Lipases in Organic Solvents Using Molecular Dynamics Simulations

This study investigates the intricate dynamics underlying lipase performance in organic solvents using comprehensive molecular dynamics (MD) simulations, supported by enzyme kinetics data. The study reveals that a single criterion can neither predict nor explain lipase activity in organic solvents, indicating the need for a comprehensive approach. Three lipases were included in this study: Candida antarctica lipase B (CALB), Rhizomucor miehei lipase (RML), and Thermomyces lanuginosus lipase (TLL). The lipases were investigated in acetonitrile, methyl tert-butyl ether, and hexane with increasing water activity. Computational investigations reveal that CALB's activity is negatively correlated to water cluster formations on its surface. In contrast, TLL's and RML's activity profiles show no negative effects of high water activity. However, TLL's and RML's activities are highly correlated to the conformation and stability of their active site regions. This study may pave the way for tailored applications of lipases, highlighting some of the factors that should be considered when lipase-catalyzed reactions are designed.

Molecular dynamics and solvation structures of the β-glucosidase from Humicola insolens (BGHI) in aqueous solutions containing glucose

The β-glucosidase enzyme is a glycosyl hydrolase that breaks down the β-1,4 linkage of cellobiose. It is inhibited by glucose at high concentrations due to competitive inhibition. However, at lower glucose concentrations, the glucose-tolerant β-glucosidase from Humicola insolens (BGHI) undergoes stimulation. Proteins, in aqueous sugar solutions, tend to be preferentially hydrated, which generally promotes their stabilization. Thus, solvation phenomena may contribute to both glucose tolerance and stimulation processes. We have performed atomistic classical Molecular Dynamics (MD) simulations of BGHI at different glucose concentrations to mimic the conditions found in the catalytic experiments. A detailed examination of the solvent environment through the calculation of minimum distance distribution functions (MDDFs) and Kirkwood-Buff (KB) integrals was performed. The enzyme is preferentially hydrated in the presence of glucose at all concentrations. Nevertheless, the hydration does not prevent the glucose from directly interacting with the BGHI surface or from entering the active site. Based on the obtained results, we hypothesize that preferential hydration is beneficial for enzyme activity. At the same time, product inhibition has little effect at lower concentrations of glucose, and at higher glucose concentrations, competition for the active site becomes predominant and the enzyme is primarily inhibited.

One-Pot Biocatalytic Conversion of Chemically Inert Hydrocarbons into Chiral Amino Acids through Internal Cofactor and H2O2 Recycling

Chemically inert hydrocarbons are the primary feedstocks used in the petrochemical industry and can be converted into more intricate and valuable chemicals. However, two major challenges impede this conversion process: selective activation of C-H bonds in hydrocarbons and systematic functionalization required to synthesize complex structures. To address these issues, we developed a multi-enzyme cascade conversion system based on internal cofactor and H2O2 recycling to achieve the one-pot deep conversion from heptane to chiral (S)-2-aminoheptanoic acid under mild conditions. First, a hydrogen-borrowing-cycle-based NADH regeneration method and H2O2 in situ generation and consumption strategy were applied to realize selective C-H bond oxyfunctionalization, converting heptane into 2-hydroxyheptanoic acid. Integrating subsequent reductive amination driven by the second hydrogen-borrowing cycle, (S)-2-aminoheptanoic acid was finally accumulated at 4.57 mM with eep>99 %. Hexane, octane, 2-methylheptane, and butylbenzene were also successfully converted into the corresponding chiral amino acids with eep>99 %. Overall, the conversion system employed internal cofactor and H2O2 recycling, with O2 as the oxidant and ammonium as the amination reagent to fulfill the enzymatic conversion from chemically inert hydrocarbons into chiral amino acids under environmentally friendly conditions, which is a highly challenging transformation in traditional organic synthesis.

Enhancing Biocatalysis through Chiral Supramolecular Scaffolds: Insights into the Structural Adaptability of Lipase

How to maintain high catalytic activity and stability in the process of biocatalysis is crucial, inspiring strategies to construct an appropriate catalytic microenvironment. Considering the lipase's inherent chirality and the necessity for a delicate hydrophilic-hydrophobic equilibrium, we crafted a chiral, nonaqueous catalytic microenvironment via the in situ coassembly of Boc-FLFL-NHNH2 (Bfl) and lipase. Benefiting from the chirality and distinct Bfl-lipase interactions, the lipase@Bfl supramolecular hybrid amplifies biological functionalities and can serve as a versatile and highly efficient catalyst. Kinetic investigations and molecular docking simulations uncover the strong lipase-substrate affinity and lipase-Bfl interactions, explaining the enhanced biological effects, catalytic activity, and stability. Our study establishes a suitable microenvironment to address the chirality and hydrophobicity during catalysis and highlights the potential of artificial chiral scaffolds and catalytic medium for enhancing lipase activity.

Expression and characterization of an organic solvent tolerant recombinant lipase from Staphylococcus capitis SH6 for food wastewater treatment

The study illustrated here aims on an organic solvent tolerant lipase from Staphylococcus capitis (SCL). The gene part, encoding the mature lipase, was cloned and sequenced. The concluded polypeptide sequence, equivalent to the protein, consist of 388 amino acid residues with a molecular mass of about 45 kDa. A structure-based alignment of the SCL amino acid sequence shows high identities with those many staphylococcal lipases. From this alignment of sequences, the catalytic triad (Ser 117, Asp 308 and His 347) of SCL could be identified. The mature part of the SCL was expressed in Escherichia coli and the recombinant lipase (r-SCL) was purified to homogeneity. The purified r-SCL presented a quite interesting stability at low temperatures (< 30 °C) and the enzyme was found to be highly stable in polar organic solvent and at a pH ranging from 3 to 12. After that, we have demonstrated that the recombinant enzyme may be implicated in the biodegradability of oily wastewater from effluents of fast-food restaurants; the maximum conversion yield into fatty acids obtained at 30 °C, was 65%.

Identification and characterization of a promiscuous metallohydrolase in metallo-β-lactamase superfamily from a locally isolated organophosphate-degrading Bacillus sp. strain S3wahi

In this present study, characteristics and structure-function relationship of an organophosphate-degrading enzyme from Bacillus sp. S3wahi were described. S3wahi metallohydrolase, designated as S3wahi-MH (probable metallohydrolase YqjP), featured the conserved αβ/βα metallo-β-lactamase-fold (MBL-fold) domain and a zinc bimetal at its catalytic site. The metal binding site of S3wahi-MH also preserves the H-X-H-X-D-H motif, consisting of specific amino acids at Zn1 (Asp69, His70, Asp182, and His230) and Zn2 (His65, His67, and His137). The multifunctionality of S3wahi-MH was demonstrated through a steady-state kinetic study, revealing its highest binding affinity (KM) and catalytic efficiency (kcat/KM) for OP compound, paraoxon, with values of 8.09 × 10-6 M and 4.94 × 105 M-1 s-1, respectively. Using OP compound, paraoxon, as S3wahi-MH native substrate, S3wahi-MH exhibited remarkable stability over a broad temperature range, 20 °C - 60 °C and a broad pH tolerance, pH 6-10. Corresponded to S3wahi-MH thermal stability characterization, the estimated melting temperature (Tm) was found to be 72.12 °C. S3wahi-MH was also characterized with optimum catalytic activity at 30 °C and pH 8. Additionally, the activity of purified S3wahi-MH was greatly enhanced in the presence of 1 mM and 5 mM of manganese (Mn2+), showing relative activities of 1323.68 % and 2073.68 %, respectively. The activity of S3wahi-MH was also enhanced in the presence of DMSO and DMF, showing relative activities of 270.37 % and 307.41 %, respectively. The purified S3wahi-MH retained >60 % residual activity after exposure to non-ionic Tween series surfactants. Nevertheless, the catalytic activity of S3wahi-MH was severely impacted by the treatment of SDS, even at low concentrations. Considering its enzymatic properties and promiscuity, S3wahi-MH emerges as a promising candidate as a bioremediation tool in wide industrial applications, including agriculture industry.

Optimizing laccase selection for enhanced outcomes: a comprehensive review

Despite their widespread applications in sectors such as pulp and paper, textile, food and beverage, pharmaceuticals, and biofuel production, laccases encounter challenges related to their activity and stability under varying reaction conditions. This review accumulates data on the complex interplay between laccase characteristics and reaction conditions for maximizing their efficacy in diverse biotechnological processes. Benefits of organic media such as improved substrate selectivity and reaction control, and their risks such as enzyme denaturation and reduced activity are reported. Additionally, the effect of reaction conditions such as pH and temperature on laccase activity and stability are gathered and reported. Sources like Bacillus pumilus, Alcaligenes faecalis, Bacillus clausii, and Bacillus tequilensis SN4 are producing laccases that are both thermo-active and alkali-active. Additionally, changes induced by the presence of various substances within reaction media such as metals, inhibitors, and organic solvents are also reported. Bacillus pumilus and Bacillus licheniformis LS04 produce the most resistant laccases in this case. Finally, the remarkable laccases have been highlighted and the proper laccase source for each industrial application is suggested.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-024-04015-5.

Cell-Free Protein Expression in Polymer Materials

While synthetic biology has advanced complex capabilities such as sensing and molecular synthesis in aqueous solutions, important applications may also be pursued for biological systems in solid materials. Harsh processing conditions used to produce many synthetic materials such as plastics make the incorporation of biological functionality challenging. One technology that shows promise in circumventing these issues is cell-free protein synthesis (CFPS), where core cellular functionality is reconstituted outside the cell. CFPS enables genetic functions to be implemented without the complications of membrane transport or concerns over the cellular viability or release of genetically modified organisms. Here, we demonstrate that dried CFPS reactions have remarkable tolerance to heat and organic solvent exposure during the casting processes for polymer materials. We demonstrate the utility of this observation by creating plastics that have spatially patterned genetic functionality, produce antimicrobials in situ, and perform sensing reactions. The resulting materials unlock the potential to deliver DNA-programmable biofunctionality in a ubiquitous class of synthetic materials.

Do Ionic Liquids Exhibit the Required Characteristics to Dissolve, Extract, Stabilize, and Purify Proteins? Past-Present-Future Assessment

Proteins are highly labile molecules, thus requiring the presence of appropriate solvents and excipients in their liquid milieu to keep their stability and biological activity. In this field, ionic liquids (ILs) have gained momentum in the past years, with a relevant number of works reporting their successful use to dissolve, stabilize, extract, and purify proteins. Different approaches in protein-IL systems have been reported, namely, proteins dissolved in (i) neat ILs, (ii) ILs as co-solvents, (iii) ILs as adjuvants, (iv) ILs as surfactants, (v) ILs as phase-forming components of aqueous biphasic systems, and (vi) IL-polymer-protein/peptide conjugates. Herein, we critically analyze the works published to date and provide a comprehensive understanding of the IL-protein interactions affecting the stability, conformational alteration, unfolding, misfolding, and refolding of proteins while providing directions for future studies in view of imminent applications. Overall, it has been found that the stability or purification of proteins by ILs is bispecific and depends on the structure of both the IL and the protein. The most promising IL-protein systems are identified, which is valuable when foreseeing market applications of ILs, e.g., in "protein packaging" and "detergent applications". Future directions and other possibilities of IL-protein systems in light-harvesting and biotechnology/biomedical applications are discussed.

The role of CE16 exo-deacetylases in hemicellulolytic enzyme mixtures revealed by the biochemical and structural study of the novel TtCE16B esterase

Acetyl esterases belonging to the carbohydrate esterase family 16 (CE16) is a growing group of enzymes, with exceptional diversity regarding substrate specificity and regioselectivity. However, further insight into the CE16 specificity is required for their efficient biotechnological exploitation. In this work, exo-deacetylase TtCE16B from Thermothelomyces thermophila was heterologously expressed and biochemically characterized. The esterase targets positions O-3 and O-4 of singly and doubly acetylated non-reducing-end xylopyranosyl residues, provided the presence of a free vicinal hydroxyl group at position O-4 and O-3, respectively. Crystal structure of TtCE16B, the first representative among the CE16 enzymes, in apo- and product-bound form, allowed the identification of residues forming the catalytic triad and oxyanion hole, as well as the structural elements related to the enzyme preference for oligomers. The role of TtCE16B in hemicellulose degradation was investigated on acetylated xylan from birchwood and pre-treated beechwood biomass. TtCE16B exhibited complementary activity to commercially available OCE6 acetylxylan esterase. Moreover, it showed synergistic effects with SrXyl43 β-xylosidase. Overall, supplementation of xylan-targeting enzymatic mixtures with both TtCE16B and OCE6 esterases led to a 3-fold or 4-fold increase in xylose release, when using TmXyn10 and TtXyn30A xylanases respectively.

Molecular Cloning, Characterization, and Application of Organic Solvent-Stable and Detergent-Compatible Thermostable Alkaline Protease from Geobacillus thermoglucosidasius SKF4

Several thermostable proteases have been identified, yet only a handful have undergone the processes of cloning, comprehensive characterization, and full exploitation in various industrial applications. Our primary aim in this study was to clone a thermostable alkaline protease from a thermophilic bacterium and assess its potential for use in various industries. The research involved the amplification of the SpSKF4 protease gene, a thermostable alkaline serine protease obtained from the Geobacillus thermoglucosidasius SKF4 bacterium through polymerase chain reaction (PCR). The purified recombinant SpSKF4 protease was characterized, followed by evaluation of its possible industrial applications. The analysis of the gene sequence revealed an open reading frame (ORF) consisting of 1,206 bp, coding for a protein containing 401 amino acids. The cloned gene was expressed in Escherichia coli. The molecular weight of the enzyme was measured at 28 kDa using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The partially purified enzyme has its highest activity at a pH of 10 and a temperature of 80°C. In addition, the enzyme showed a half-life of 15 h at 80°C, and there was a 60% increase in its activity at 10 mM Ca2+ concentration. The activity of the protease was completely inhibited (100%) by phenylmethylsulfonyl fluoride (PMSF); however, the addition of sodium dodecyl sulfate (SDS) resulted in a 20% increase in activity. The enzyme was also stable in various organic solvents and in certain commercial detergents. Furthermore, the enzyme exhibited strong potential for industrial use, particularly as a detergent additive and for facilitating the recovery of silver from X-ray film.

Production and characterization of an organic solvent activated protease from haloalkaliphilic bacterium Halobiforma sp. strain BNMIITR

An unusual haloalkaliphilic bacterium known as Halobiforma sp. strain BNMIITR, which was noticed to produce an extracellular alkaline protease, was found in a soil sample from Northern India's Sambhar Lake. On the generation of protease, the effects of dietary elements including nitrogen and carbon sources, amino acids, and growth conditions like temperature and pH were investigated. When low-cost agricultural by-products were employed as nitrogen sources, the manufacturing of enzymes was significantly boosted. In the present study, protease production was enhanced by 2.94 fold and 2.17 fold. By solvent precipitation and Hydrophobic interaction chromatography (HIC) on Phenyl Sepharose 6 Fast Flow matrix, the enzyme was purified 31.67 fold. It was determined that the apparent molecular mass was 21 kDa. The pH range where the enzyme was most stable was 6.0-12.0, with a temperature of 50 °C as optimum. When there was alkaline earth metals and heavy metals, protease was discovered to be active. It was evident that the enzyme was a serine type of protease because it was active in the presence of a variety of surfactants, oxidizing and reducing chemicals, and phenylmethylsulfonyl fluoride (PMSF) completely inhibited activity. Enzyme exhibited a wide range of substrate specificity. Amazingly, enzyme remained stable both in polar and nonpolar solvents. The most interesting aspect of this enzyme is enhanced activity in polar solvents like dimethylformamide (DMF) and dimethyl sulfoxide (DMSO). It was discovered that the protease was stable and compatible with a number of widely available detergents.

Effect of structural stability of lipase in acetonitrile on its catalytic activity in EGCG esterification reaction: FTIR and MD simulation

In this study, (-)-Epigallocatechin-3-O-gallate (EGCG) esterification reaction was catalyzed by Novozym 435, Lipozyme RM, Lipozyme TLIM, and lipase Amano 30SD in acetonitrile. Fourier transform infrared spectroscopy (FTIR) and molecular dynamic (MD) simulations were used to analyze the structural stability of different lipases in acetonitrile and their effect on EGCG esterification reaction. The results showed that conversion rate of EGCG catalyzed by Lipozyme RM was the highest, followed by Lipozyme TLIM. FTIR indicated that the secondary structure of Lipozyme RM was the most stable. MD simulations suggested that whole structural stability of Lipozyme RM in acetonitrile was superior to Novozym 435 and lipase Amano 30SD and similar to Lipozyme TLIM due to their similar conformation, while the active site of Lipozyme RM is more flexible than that of Lipozyme TLIM, which indicated that lipase with stable whole structure and flexible active site may be more conducive to the esterification of EGCG in acetonitrile. This study provided a direction for rapidly screening lipase to synthetize EGCG or other polyphenols esterified derivatives.

Production, purification, and characterization of p-diphenol oxidase (PDO) enzyme from lignolytic fungal isolate Schizophyllum commune MF-O5

Fungi are producers of lignolytic extracellular enzymes which are used in industries like textile, detergents, biorefineries, and paper pulping. This study assessed for the production, purification, and characterization of novel p-diphenol oxidase (PDO; laccase) enzyme from lignolytic white-rot fungal isolate. Fungi samples collected from different areas of Pakistan were initially screened using guaiacol plate method. The maximum PDO producing fungal isolate was identified on the basis of ITS (internal transcribed spacer sequence of DNA of ribosomal RNA) sequencing. To get optimum enzyme yield, various growth and fermentation conditions were optimized. Later PDO was purified using ammonium sulfate precipitation, size exclusion, and anion exchange chromatography and characterized. It was observed that the maximum PDO producing fungal isolate was Schizophyllum commune (MF-O5). Characterization results showed that the purified PDO was a monomeric protein with a molecular mass of 68 kDa and showed stability at lower temperature (30 °C) for 1 h. The Km and Vmax values of the purified PDO recorded were 2.48 mM and 6.20 U/min. Thermal stability results showed that at 30 °C PDO had 119.17 kJ/K/mol Ea value and 33.64 min half-life. The PDO activity was stimulated by Cu2+ ion at 1.0 mM showing enhanced activity up to 111.04%. Strong inhibition effect was noted for Fe2+ ions at 1 mM showing 12.04% activity. The enzyme showed stability against 10 mM concentration oxidizing reducing agents like DMSO, EDTA, H2O2, NaOCl, and urea and retained more than 75% of relative activity. The characterization of purified PDO enzyme confirmed its tolerance against salt, metal ions, organic solvents, and surfactants indicating its ability to be used in the versatile commercial applications.

Enhanced Activity and Stability of an Acetyl Xylan Esterase in Hydrophilic Alcohols through Site-Directed Mutagenesis

Current demands for the development of suitable biocatalysts showing high process performance is stimulated by the need to replace current chemical synthesis with cleaner alternatives. A drawback to the use of biocatalysts for unique applications is their low performance in industrial conditions. Hence, enzymes with improved performance are needed to achieve innovative and sustainable biocatalysis. In this study, we report the improved performance of an engineered acetyl xylan esterase (BaAXE) in a hydrophilic organic solvent. The structure of BaAXE was partitioned into a substrate-binding region and a solvent-affecting region. Using a rational design approach, charged residues were introduced at protein surfaces in the solvent-affecting region. Two sites present in the solvent-affecting region, A12D and Q143E, were selected for site-directed mutagenesis, which generated the mutants MUT12, MUT143 and MUT12-143. The mutants MUT12 and MUT143 reported lower Km (0.29 mM and 0.27 mM, respectively) compared to the wildtype (0.41 mM). The performance of the mutants in organic solvents was assessed after enzyme incubation in various strengths of alcohols. The mutants showed improved activity and stability compared to the wild type in low strengths of ethanol and methanol. However, the activity of MUT143 was lost in 40% methanol while MUT12 and MUT12-143 retained over 70% residual activity in this environment. Computational analysis links the improved performance of MUT12 and MUT12-143 to novel intermolecular interactions that are absent in MUT143. This work supports the rationale for protein engineering to augment the characteristics of wild-type proteins and provides more insight into the role of charged residues in conferring stability.

Influence of elevated pressure and pressurized fluids on microenvironment and activity of enzymes

Enzymes have great potential in bioprocess engineering due to their green and mild reaction conditions. However, there are challenges to their application, such as enzyme extraction and purification costs, enzyme recovery, and long reaction time. Enzymatic reaction rate enhancement and enzyme immobilization have the potential to overcome some of these challenges. Application of high pressure (e.g., hydrostatic pressure, supercritical carbon dioxide) has been shown to increase the activity of some enzymes, such as lipases and cellulases. Under high pressure, enzymes undergo multiple alterations simultaneously. High pressure reduces the bond lengths of molecules of reaction components and causes a reduction in the activation volume of enzyme-substrate complex. Supercritical CO2 interacts with enzyme molecules, catalyzes structural changes, and removes some water molecules from the enzyme's hydration layer. Interaction of scCO2 with the enzyme also leads to an overall change in secondary structure content. In the extreme, such changes may lead to enzyme denaturation, but enzyme activation and stabilization have also been observed. Immobilization of enzymes onto silica and zeolite-based supports has been shown to further stabilize the enzyme and provide resistance towards perturbation under subjection to high pressure and scCO2.

Biochemical characteristics of Myceliophthora thermophila recombinant β-glucosidase (MtBgl3c) applicable in cellulose bioconversion

The GH3 β-glucosidase gene of Myceliophthora thermophila (MtBgl3c) has been cloned and heterologously expressed in E. coli for the first time. This study highlights the important characteristics of recombinant MtBgl3c (rMtBgl3c) which make it a promising candidate in industrial applications. Optimization of the production of rMtBgl3c led to 28,000 U L-1. On purification, it has a molecular mass of ∼100 kDa. It is a broad substrate specific thermostable enzyme that exhibits pH and temperature optima at 5.0 and 55 °C, respectively. The amino acid residues Asp287 and Glu514 act as nucleophile and catalytic acid/base, respectively in the enzyme catalysis. Its low Km value (1.28 mM) indicates a high substrate affinity as compared to those previously reported. The rMtBgl3c displays a synergistic action with the commercial enzyme cocktail in the saccharification of sugarcane bagasse suggesting its utility in the cellulose bioconversion. Tolerance to solvents, detergents as well as glucose make this enzyme applicable in wine, detergent, paper and textile industries too.

Maleic anhydride-modified xylanase and its application to the clarification of fruits juices

At presently, the catalytic activity of xylanase is sub-optimal, and the required reaction conditions are harsh. To improve its catalytic activity and stability, xylanase (XY) was chemically modified with maleic anhydride (MA). The enzymatic properties of this maleic anhydride-modified xylanase (MA-XY) were then evaluated and analyzed spectroscopically. The results showed that the thermal stability, use of organic solvents, storage stability and the pH range of 3.0 to 9.0 for MA-XY were better than that for XY alone. The kinetic parameters of the enzyme (Km values) decreased from 40.63 to 30.23 mg/mL. Spectroscopic analysis showed that XY had been modified by the acylation reaction to become a tertiary structure. An assay based on clarifying fruit juices showed that the clarification capacity and reducing sugar content using MA-XY increased compared with those using XY. Overall, this study provides a theoretical basis for improving the application of XY in the food industry.

Characterization of alkaline metalloprotease isolated from halophilic bacterium Bacillus cereus and its applications in various industrial processes

Microbial proteases are one of the most demanding enzymes for various industries with diverse applications in food, pharmaceutics, and textile industries to name the few. An extracellular alkaline metalloprotease was produced and purified from moderate halophilic bacterial strain, Bacillus cereus TS2, with some unique characteristics required for various industrial applications. The protease was produced in basal medium supplemented with casein and was partially purified by ion exchange chromatography followed by ammonium sulphate precipitation. The alkaline metalloprotease has molecular weight of 35 kDa with specific activity of 535.4 µM/min/mg. It can work at wide range of pH from 3 to 12, while showing optimum activity at pH 10. Similarly, the alkaline metalloprotease is stable till the temperature of 80 °C and works at wide range of temperature from 20 to 90 °C with optimum activity at 60 °C. The turnover rate increases in the presence of NaCl and Co+2 with k cat/KM of 1.42 × 103 and 1.27 × 103 s-1.M-1 respectively, while without NaCl and Co+2 it has a value of 7.58× 102. The alkaline metalloprotease was relatively resistant to thermal and solvent mediated denaturation. Applications revealed that the metalloprotease was efficient to remove hair from goat skin, remove blood stains and degrade milk, thus can be a potential candidate for leather, detergent, and food industry.

Purification and characterization of a high molecular weight serine protease from Microbacterium paraoxydans sp. SKS10

Alkaline proteases from microbial sources have been found suitable for diverse industrial applications, with serine proteases being the most common enzymes used in the detergent industry. In the present study, we have purified and characterized an extracellular alkaline serine protease from Microbacterium paraoxydans sp. SKS10. The protease was purified using ammonium sulfate precipitation followed by different chromatography techniques (fold purification 6.919). Km and Vmax for the protease were determined to be 0.183 mg/mL and 4.904 U/mL, respectively. This enzyme is a thermostable high molecular weight (∼109.4 kDa) protease which has maximal activity at 60°C, and above pH 10. Inhibitor assays revealed the enzyme to be a serine protease whose activity increased by 2.5-fold in the presence of EDTA. This enzyme remained active in the presence of various metal salts and organic solvents and was compatible with commercially available laundry detergents highlighting its potential for use in the detergent industry.

A novel salt- and organic solvent-tolerant phosphite dehydrogenase from Cyanothece sp. ATCC 51142

Phosphite dehydrogenase (PtxD) is a promising enzyme for NAD(P)H regeneration. To expand the usability of PtxD, we cloned, expressed, and analyzed PtxD from the marine cyanobacterium Cyanothece sp. ATCC 51142 (Ct-PtxD). Ct-PtxD exhibited maximum activity at pH 9.0°C and 50°C and high stability over a wide pH range of 6.0-10.0. Compared to previously reported PtxDs, Ct-PtxD showed increased resistance to salt ions such as Na+, K+, and NH4 +. It also exhibited high tolerance to organic solvents such as ethanol, dimethylformamide, and methanol when bound to its preferred cofactor, NAD+. Remarkably, these organic solvents enhanced the Ct-PtxD activity while inhibiting the PtxD activity of Ralstonia sp. 4506 (Rs-PtxD) at concentrations ranging from 10% to 30%. Molecular electrostatic potential analysis showed that the NAD+-binding site of Ct-PtxD was rich in positively charged residues, which may attract the negatively charged pyrophosphate group of NAD+ under high-salt conditions. Amino acid composition analysis revealed that Ct-PtxD contained fewer hydrophobic amino acids than other PtxD enzymes, which reduced the hydrophobicity and increased the hydration of protein surface under low water activity. We also demonstrated that the NADH regeneration system using Ct-PtxD is useful for the coupled chiral conversion of trimethylpyruvic acid into L-tert-leucine using leucine dehydrogenase under high ammonium conditions, which is less supported by the Rs-PtxD enzyme. These results imply that Ct-PtxD might be a potential candidate for NAD(P)H regeneration in industrial applications under the reaction conditions containing salt and organic solvent.

Impact of organic solvents on the catalytic performance of halohydrin dehalogenase

Biocatalytic transformations in organic synthesis often require the use of organic solvents to improve substrate solubility and promote the product formation. Halohydrin dehalogenases (HHDHs) are enzymes that catalyze the formation and conversion of epoxides, important synthetic class of compounds that are often sparingly soluble in water and prone to hydrolysis. In this study, the activity, stability, and enantioselectivity of HHDH from Agrobacterium radiobacter AD1 (HheC) in form of cell-free extract were evaluated in various aqueous-organic media. A correlation was discovered between the enzyme activity in the ring-closure reaction and logP of the solvent. Knowledge of such a relationship makes biocatalysis with organic solvents more predictable, which may reduce the need to experiment with a variety of solvents in the future. The results revealed a high enzyme compatibility with hydrophobic solvents (e.g., n-heptane) in terms of activity and stability. Regarding the HHDH applicability in an organic medium, inhibitions by a number of solvents (e.g., THF, toluene, chloroform) proved to be a more challenging problem than the protein stability, especially in the ring-opening reaction, thus suggesting which solvents should be avoided. In addition, solvent tolerance of the thermostable variant ISM-4 was also evaluated, revealing increased stability and to a lesser extent enantioselectivity compared to the wild-type. This is the first time such a systematic analysis has been reported, giving insight into the behavior of HHDHs in nonconventional media and opening new opportunities for the future biocatalytic applications. KEY POINTS: • HheC performs better in the presence of hydrophobic than hydrophilic solvents. • Enzyme activity in the PNSHH ring-closure reaction is a function of the logP. • Thermostability of ISM-4 variant is accompanied by superior solvent tolerance.

Solvent tolerant enzymes in extremophiles: Adaptations and applications

Non-aqueous enzymology has always drawn attention due to the wide range of unique possibilities in biocatalysis. In general, the enzymes do not or insignificantly catalyze substrate in the presence of solvents. This is due to the interfering interactions of the solvents between enzyme and water molecules at the interface. Therefore, information about solvent-stable enzymes is scarce. Yet, solvent-stable enzymes prove quite valuable in the present day biotechnology. The enzymatic hydrolysis of the substrates in solvents synthesizes commercially valuable products, such as peptides, esters, and other transesterification products. Extremophiles, the most valuable yet not extensively explored candidates, can be an excellent source to investigate this avenue. Due to inherent structural attributes, many extremozymes can catalyze and maintain stability in organic solvents. In the present review, we aim to consolidate information about the solvent-stable enzymes from various extremophilic microorganisms. Further, it would be interesting to learn about the mechanism adapted by these microorganisms to sustain solvent stress. Various approaches to protein engineering are used to enhance catalytic flexibility and stability and broaden biocatalysis's prospects under non-aqueous conditions. It also describes strategies to achieve optimal immobilization with minimum inhibition of the catalysis. The proposed review would significantly aid our understanding of non-aqueous enzymology.

Evolving Robust and Interpretable Enzymes for the Bioethanol Industry

Obtaining a robust and applicable enzyme for bioethanol production is a dream for biorefinery engineers. Herein, we describe a general method to evolve an all-round and interpretable enzyme that can be directly employed in the bioethanol industry. By integrating the transferable protein evolution strategy InSiReP 2.0 (In Silico guided Recombination Process), enzymatic characterization for actual production, and computational molecular understanding, the model cellulase PvCel5A (endoglucanase II Cel5A from Penicillium verruculosum) was successfully evolved to overcome the remaining challenges of low ethanol and temperature tolerance, which primarily limited biomass transformation and bioethanol yield. Remarkably, application of the PvCel5A variants in both first- and second-generation bioethanol production processes (i. Conventional corn ethanol fermentation combined with the in situ pretreatment process; ii. cellulosic ethanol fermentation process) resulted in a 5.7-10.1 % increase in the ethanol yield, which was unlikely to be achieved by other optimization techniques.

Screening, characterization, and kinetic studies of a serine alkaline protease from kitchen wastewater bacteria P2S1An and evaluation of its application in nutraceutical production

This present investigation aimed at characterizing the biochemical potential and kinetic study of the protease isolated from kitchen wastewater bacteria, P2S1An. The enzymatic activity was optimum when incubated for 96 h, at 30°C and pH 9.0. The enzymatic activity of the purified protease (PrA) was 10.47-folds that of crude protease (S1). PrA was about 35 kDa in molecular weight. The broad pH and thermal stability, chelators, surfactants and solvent tolerance, and favorable thermodynamics suggested the potentiality of the extracted protease PrA. Thermal activity and stability were enhanced in presence of 1-mM Ca²⁺ ion at high temperatures. The protease was a serine one as its activity was completely diminished in presence of 1-mM PMSF. The V_max , K_m , and K_cat /K_m suggested stability and catalytic efficiency of the protease. PrA hydrolyzes fish protein with 26.61 ± 0.16% of peptide bond cleavage after 240 min, comparable to Alcalase 2.4L (27.13 ± 0.31%). PRACTITIONER POINTS: A serine alkaline protease PrA was extracted from kitchen wastewater bacteria Bacillus tropicus Y14. Protease PrA showed significant activity and stability in a wide temperature and pH range. Protease showed great stability towards additives like metal ions, solvents, surfactants, polyols, and inhibitors. Kinetic study showed that the protease PrA had a prominent affinity and catalytic efficiency for the substrates. PrA hydrolysed fish proteins into short bioactive peptides which signify its potential in the formation of functional food ingredients.

Effect of attaching hydrophilic oligopeptides to the C-terminus of organic solvent-tolerant metal-free bromoperoxidase BPO-A1 from Streptomyces aureofaciens on organic solvent-stability

Metal-free bromoperoxidase BPO-A1 from Streptomyces aureofacience was selected among several similar enzymes exhibiting brominating activity as the most stable haloperoxidase against 70%(v/v) methanol. A comparison of the BPO-A1 and octahistidine-tagged BPO-A1 at the C-terminus (BPO-A1-His₈) revealed that the His-tag enhanced the organic solvent-stability of BPO-A1 with pH- and heat-stabilities. Additionally, the contribution of the hydrophilicity at the C-terminal of BPO-A1 to the organic solvent-stability was confirmed employing several mutants bearing hydrophilic oligopeptides. Fortunately, two excellent mutants, BPO-A1-Lys₈ and BPO-A1-Arg₈, with high stabilities against various water-miscible organic solvents were obtained. In conclusion, the enhancing effect of the hydrophilic oligopeptides on the organic solvent-stability was associated with a decrease in the hydrophobic surface area near the C-terminus.

Characterization of a novel thermostable alkaline lipase derived from a compost metagenomic library and its potential application in the detergent industry

Using composted soil samples, a metagenomic library consisting of 36,000 clones was constructed. Then, a novel lipase, Lip54q, which belongs to the VIII family of lipolytic enzymes, was identified from the metagenomic library by functional screening. To explore the enzymatic properties of Lip54q, lip54q was heterologous expressed in Escherichia coli with a high expression level of recombinant protein up to 720 mg/L. The recombinant enzyme showed the highest activity (28,160 U/mg) against a C10 substrate at pH 9.0 and 47°C, and was stable at temperatures ≤50°C and pH 8.0-11.0. Of particular interest, the surfactants, Tween-20, Tween-80 and Tritonx-100, exhibited strong promoting effects on Lip54q activities regardless of whether low concentrations (0.1%) or high concentrations (10%) were used. Application studies of Lip54q using six commercial detergents indicated that the enzyme had strong tolerance and immersion resistance to all six detergents. The results of oil-stain removal experiments suggested that addition of the enzyme to various commercial detergents could significantly improve the abilities of these detergents to remove oil-stains. Furthermore, the results of a molecular docking analysis of Lip54q showed that both the C10 substrate and linoleic acid molecules could form hydrogen bond interactions with the catalytic amino acids, Ser-268, Glu-168, and Asp-192, in the catalytic center of the enzyme, and the hydrogen bond distances were shorter. The electrostatic attraction between the enzyme and the substrate formed by the hydrogen bond with a shorter distance is stronger, which is conducive to the formation of a more stable complex between the enzyme and the substrate, thus increasing the activity of the enzyme to such substrate. These results 1ay a good foundation for application of this enzyme in the detergent industry in the future.

Where Chemocatalysis Meets Biocatalysis: In Water

Chemoenzymatic catalysis, by definition, involves the merging of sequential reactions using both chemocatalysis and biocatalysis, typically in a single reaction vessel. A major challenge, the solution to which, however, is associated with numerous advantages, is to run such one-pot processes in water: the majority of enzyme-catalyzed processes take place in water as Nature's reaction medium, thus enabling a broad synthetic diversity when using water due to the option to use virtually all types of enzymes. Furthermore, water is cheap, abundantly available, and environmentally friendly, thus making it, in principle, an ideal reaction medium. On the other hand, most chemocatalysis is routinely performed today in organic solvents (which might deactivate enzymes), thus appearing to make it difficult to combine such reactions with biocatalysis toward one-pot cascades in water. Several creative approaches and solutions that enable such combinations of chemo- and biocatalysis in water to be realized and applied to synthetic problems are presented herein, reflecting the state-of-the-art in this blossoming field. Coverage has been sectioned into three parts, after introductory remarks: (1) Chapter 2 focuses on historical developments that initiated this area of research; (2) Chapter 3 describes key developments post-initial discoveries that have advanced this field; and (3) Chapter 4 highlights the latest achievements that provide attractive solutions to the main question of compatibility between biocatalysis (used predominantly in aqueous media) and chemocatalysis (that remains predominantly performed in organic solvents), both Chapters covering mainly literature from ca. 2018 to the present. Chapters 5 and 6 provide a brief overview as to where the field stands, the challenges that lie ahead, and ultimately, the prognosis looking toward the future of chemoenzymatic catalysis in organic synthesis.

The response surface methodology for optimization of Halomonas sp. C2SS100 lipase immobilization onto CaCO3 for treatment of tuna wash processing wastewater

An immobilized enzyme could exhibit selectively modified physicochemical properties, and it might offer a better environment for the enzyme activity. In this study, the immobilization yield of crude Halomonas sp. lipase was optimized to improve its stability. Thanks to its high adsorption capacity, CaCO₃ has been chosen as support for the immobilization process. Furthermore, response surface methodology (RSM) was used to determine optimal conditions for the immobilization of the bacterial lipase. Five tested factors (enzyme solution, support amount, time, temperature, and acetone volume) were optimized applying a central composite design of RSM. The maximum yield of lipase immobilization was improved to 96%. Furthermore, a biochemical characterization proved a significant improvement of the immobilized lipase stability. The immobilized enzyme is more stable at extreme pH values and high temperatures than the free one. We also tested the reusability of the immobilized lipase by evaluating the recovery of the support using simple filtration. Thanks to its high stability, the immobilized lipase was invested in an effective treatment of tuna wash processing wastewater. The oil biodegradation efficiency was established at 81.5% and was confirmed by Fourier transformation infrared spectrometry. Likewise, the biological oxygen demand values were reduced which makes a possible reduction of the wastewater pollution degree.

Directed evolution engineering to improve activity of glucose dehydrogenase by increasing pocket hydrophobicity

Glucose dehydrogenase (GDH) is a NAD(P)+ dependent oxidoreductase, which is useful in glucose determination kits, glucose biosensors, cofactor regeneration, and biofuel cells. However, the low efficiency of the catalysis hinders the use of GDH in industrial applications. In this study, an analysis of interactions between eight GDH mutants and NADP+ is powered by AlphaFold2 and Discovery Studio 3.0. The docking results showed that more hydrogen bonds formed between mutants, such as P45A and NADP+, which indicated that these mutants had the potential for high catalytic efficiency. Subsequently, we verified all the mutants by site-directed mutagenesis. It was notable that the enzyme activity of mutant P45A was 1829 U/mg, an improvement of 28-fold compared to wild-type GDH. We predicted the hydrophobicity of the protein-ligand complexes, which was confirmed by an 8-anilino-1-naphthalenesulphonic acid fluorescent probe. The following order of increasing hydrophobicity index was deduced: GDH &lt; N46E &lt; F155Y &lt; P45A, which suggested that the enzyme activity of GDH is positively related to its pocket hydrophobicity. Furthermore, P45A still showed better catalytic ability in organic solvents, reaching 692 U/mg in 10% isopropanol, which was 19-fold that of the wild-type GDH. However, its substrate affinity was affected by organic solvents. This study provides a good theoretical foundation for further improving the catalytic efficiency of GDH.

Enhancing the biocatalytic synthesis of chiral drug intermediate by rational design an aldo-keto reductase from Bacillus megaterium YC4-R4

In recent years, with the increasing number of patients with depression, the efficient synthesis of the first-line antidepressant drug duloxetine intermediate (S-N,N-dimethyl-3-hydroxy-3-(2-thienyl)-1-propanamine, S-DHTP) has attracted great attention. The wild-type AKR3-2-9 from Bacillus megaterium YC4-R4 exhibits high application potential of catalyzing N,N-dimethyl-3-keto-3-(2-thienyl)-1-propanamine (DKTP) to prepare S-DHTP, but there is still much room for improvement. In this work, rational design was carried out to enhance the catalytic potential of AKR3-2-9. Notably, compared to the wild-type AKR3-2-9, three mutants (Ile189Val, Asn256Asp, and Ile189Val + Asn256Asp) were obtained, and their catalytic efficiencies were increased by 1.3 times, 2.3 times, and 1.31 times, respectively. Besides, the thermal stability and organic solvent resistance were improved. More importantly, when the concentration of the substrate DKTP was 0.5 g/L, the catalytic yields of Ile189Val, Asn256Asp and Ile189Val + Asn256Asp were increased by 1.45 times, 1.86 times, and 2.05 times, respectively. Besides, the corresponding optical purities of the three mutants were 92.7 %, 94.3 % and 93.8 %. The above results indicated that the rational design of the AKR of Bacillus megaterium YC4-R4 enhanced its potential for biocatalytic preparation of S-DHTP.

Molecular study on recombinant cold-adapted, detergent- and alkali stable esterase (EstRag) from Lysinibacillus sp.: a member of family VI

Cold-adapted esterases have potential industrial applications. To fulfil the global continuous demand for these enzymes, a cold-adapted esterase member of family VI from Lysinibacillus sp. YS11 was cloned on pET-28b (+) vector and expressed in E. coli BL21(DE3) Rosetta cells for the first time. The open reading frame (654 bp: GenBank MT120818.1) encodes a polypeptide (designated EstRag: 217 amino acid residues). EstRag amino acid sequence has conserved esterase signature motifs: pentapeptide (GFSQG) and catalytic triad Ser¹¹⁰-Asp¹⁶³-His¹⁹⁴. EstRag 3D predicted model, built with LOMETS3 program, showed closest structural similarity to PDB 1AUO_A (esterase: Pseudomonas fluorescens); TM-align score program inferences. Purified EstRag to 9.28-fold, using Ni²⁺affinity agarose matrix, showed a single protein band (25 kDa) on SDS-PAGE, Km (0.031 mM) and Kcat/Km (657.7 s⁻¹ mM⁻¹) on p-NP-C2. Temperature and pH optima of EstRag were 35 °C and 8.0, respectively. EstRag was fully stable at 5–30 °C for 120 min and at pH(s) 8.0–10.0 after 24 h. EstRag activity (391.46 ± 0.009%) was impressively enhanced after 30 min preincubation with 5 mM Cu²⁺. EstRag retained full stability after 30 min pre-incubation with 0.1%(v/v) SDS, Triton X-100, and Tween-80. EstRag promising characteristics motivate performing guided evolution and industrial applications prospective studies.

Can deep eutectic solvents be the best alternatives to ionic liquids and organic solvents: A perspective in enzyme catalytic reactions

As a new generation of green solvents, deep eutectic solvents (DESs) have been considered as a promising alternative to classical organic solvents and ionic liquids (ILs). DESs are normally formed by two or more components via various h-bonds interactions. Up to date, four types of DESs are found, namely, type I DESs (formed by MClx, namely FeCl₂, AlCl₃, ZnCl₂, CuCl₂ and AgCl et al., and quaternary ammonium salts); type II DESs (formed by metal chloride hydrates and quaternary ammonium salts); type III DESs (formed by choline chlorides and different kinds of HBDs) and type IV DESs (formed by salts of transition metals and urea). DESs share many advantages, such as low vapor pressure, good substrate solubility and thermal stability, with ILs, and offering a high potential to be the medium of biocatalysis reactions. In this case, this paper reviews the applications of DESs in enzymatic reactions. Lipases are the most widely used enzyme in DESs systems as their versatile applications in various reactions and robustness. Interestingly, DESs can improve the efficiency of these reactions via enhancing the substrates solubility and the activity and stability of enzymes. Therefore, the directed engineering of DESs for special reactions such as degradation of polymers in high temperature or strong acid-base conditions will be one of the future perspectives of the investigation DESs.

Different Effects of Salt Bridges near the Active Site of Cold-Adapted Proteus mirabilis Lipase on Thermal and Organic Solvent Stabilities

Organic solvent-tolerant (OST) enzymes have been discovered in psychrophiles. Cold-adapted OST enzymes exhibit increased conformational flexibility in polar organic solvents resulting from their intrinsically flexible structures. Proteus mirabilis lipase (PML), a cold-adapted OST lipase, was used to assess the contribution of salt bridges near the active site involving two arginine residues (R237 and R241) on the helix η1 and an aspartate residue (D248) on the connecting loop to the thermal and organic solvent stabilities of PML. Alanine substitutions for the ion pairs (R237A, R241A, D248A, and R237A/D248A) increased the conformational flexibility of PML mutants compared to that of the wild-type PML in an aqueous buffer. The PML mutants became more susceptible to denaturation after increasing the dimethyl sulfoxide or methanol concentration than after a temperature increase. Methanol was more detrimental to the structural stability of PML compared to dimethyl sulfoxide. These results suggest that direct interactions of dimethyl sulfoxide and methanol with the residues near the active site can have a destructive effect on the structure of PML compared with the global effect of heat on the protein structure. This study provides insight into the conformational changes within an OST enzyme with different effects on its thermal and organic solvent stabilities.

Current understanding and insights towards protein stabilization and activation in deep eutectic solvents as sustainable solvent media

Deep eutectic solvents (DESs) have emerged as a new class of green, designer and biocompatible solvents, an alternative to conventional organic solvents and ionic liquids (ILs) which are comparatively toxic and non-biodegradable. DESs are eutectic mixtures that are formed when a hydrogen bond acceptor (HBA) is mixed with a hydrogen bond donor (HBD) at particular molar ratios by mechanical grinding or under mild heating conditions. Very recently, these solvents have been the center of attention for researchers in biotechnology, biomedicine and various scientific applications. These environmentally benign solvents have a close analogy with ILs; however, they offer certain unique merits over traditional ILs. DESs display remarkable properties such as easy preparation, tunable composition, biodegradability, recyclability, inherently low toxicity, sustainability and biocompatibility; these special features validate DESs as new potential solvents/co-solvents for biomolecules. Mechanistically, the biocompatibility and protein friendly nature of DESs depend on various factors, which include the composition of the DES, viscosity and hydration level. Therefore, it becomes an essential task to bring together all the studies related to protein behaviour in DESs to unlock their biomolecular proficiency. This review specifically highlights recent insights into the biomacromolecular functionality in DESs, including outlines of the solubilization and stabilization of proteins, long term protein packaging, different extraction methods and enzyme activation in the presence of DESs. A literature survey reveals that DESs act as green media in which the protein structure and activity are retained. In some cases, proteins refolded and enzymatic activity was enhanced several fold in the presence of DESs. Furthermore, we have reviewed the possible mechanistic behaviour behind protein stabilization, refolding and activation in DESs. Overall, the main objective of this review is to explicate the advantages of the introduction of DESs for biomolecules and to demonstrate the versatility of these eco-friendly solvents for future bio-based applications.

Efficient heterologous expression in Pichia pastoris, immobilization and functional characterization of a scorpion venom secreted phospholipase A2

Industrial processes have expanded with the ability to clone and express recombinant immobilized enzymes in microorganisms such as Pichia pastoris that have commercially attractive amounts of the appropriate genes. This report describes the overexpression in Pichia pastoris, immobilization, and functional characterization of a secreted phospholipase A₂ from scorpion venom Scorpio maurus: rPLA₂(-5). After 48 h of culture, the recombinant rPLA₂(-5) was secreted into the culture medium and expressed at about 9 mg/L. Comparative analyses of the kinetics and hydrolysis of rPLA₂(-5) monolayers at various surface pressures were conducted with the same form produced in Escherichia coli. As a second part of the study, rPLA₂(-5) overexpressed in Pichia pastoris was immobilized by adsorption on CaCO₃, with about 78 percent of the activity. In comparison to the free enzyme, rPLA₂(-5) was studied for stability. Immobilization improved the thermal stability of rPLA₂(-5) and even the stability at acidic pH. Moreover, we found that the immobilization improved the stability of rPLA₂(-5) towards bile salts, Tween 80, Triton X-100, and SDS, as well as its stability towards many organic solvents. Until now, this is the first study to describe the overexpression and immobilization of a scorpion venom phospholipase A₂ that possesses an interesting stability characteristic that makes it useful for a wide range of biotechnological applications.

Elimination and detoxification of phenanthrene assisted by a laccase from halophile Alkalibacillus almallahensis

Phenanthrene (Phe), a tricyclic Polycyclic Aromatic Hydrocarbon (PAH), is found in high concentrations as a pollutant in various environments. In this study, the removal or (oxidizing) ability of Phe by a laccase from Alkalibacillus almallahensis was investigated. The laccase (12 U mL-1) was able to remove 63% of Phe (50 mg L-1) under optimal conditions of 40 °C, pH 8, 1.5 M NaCl and in the presence of 1 mM HBT as a laccase mediator after a 72 h incubation period. The results for the effect of different solvents, ionic and non-ionic surfactants on the activity of the halophilic laccase towards Phe showed that the addition of these compounds increase removal efficiency and complete enzymatic removal of Phe will achieve in a solution of 5% (v/v) acetone and 1.5% tween 80. The kinetic parameters K m and V max of laccase-catalyzed removal of the substrate were determined as 0.544 mM and 0.882 µmol h-1 mg-1, respectively. A microtoxicity study with respect to the inhibition of algal growth showed a decrease in toxicity of the laccase-treated Phe solution.

Facile immobilization of his-tagged Microbacterial esterase on Ni-SBA-15 with enhanced stability for efficient synthesis of key chiral intermediate of d-biotin

A series of nickel-incorporated SBA-15 mesoporous molecular sieves (Ni-SBA-15) were prepared as support for the immobilization of his-tagged recombinant Microbacterium esterase. The Ni-SBA-15 could strongly and specific absorb the his-tagged esterase from cell disrupted supernatant. It was found that the nickel amount in Ni-SBA-15 has dramatic influence on the activity and thermo-stability of immobilized enzyme, while the kinds of nickel precursor had little effect on enzyme stability. The morphology, chemical composition and structure of the best support NiCl₂-SBA-15 (Ni-SBA-15 prepared from NiCl₂ precursor) were characterized by various spectroscopy techniques. The immobilized esterase retained full activity of free esterase and showed high immobilized yield (> 90%) with higher thermo-stability, pH stability and organic solvent resistance compared with free enzyme. The optimum reaction temperature increased from 35 to 40 °C and the optimal reaction pH moved from 10.0 to 8.0 after enzyme immobilization. The immobilized esterase exhibited excellent storage stability and keeping 92% of the initial activity after 30 days' storage at 25 °C. In addition, the immobilized esterase had excellent reusability for the synthesis of key chiral intermediate of d-biotin and the substrate conversion could still keep 100% after 13 cycles continuously. Finally, optical pure (4S, 5R)-hemiester was obtained in 80.8% isolated yield and 99% purity in the gram preparative scale.

Expression and characterization of a novel lipase from Bacillus licheniformis NCU CS-5 for application in enhancing fatty acids flavor release for low-fat cheeses

A novel lipase from Bacillus licheniformis NCU CS-5 was expressed in different Escherichia coli cells. The recombinant enzyme achieved a high activity (161.74 U/mL) with protein concentration of 0.27 mg/mL under optimal conditions at the large-scale expression of 12 h. The recombinant lipase showed optimal activity at 40 ℃ and pH 10.0, and maintained more than 80% relative activity after 96 h of incubation at pH 9.0-10.0. This typical alkaline lipase was activated under medium temperature conditions (30 and 45 ℃ for 96 h). The lipase exhibited a degree of adaptability in various organic solvents and metal ions, and showed high specificity towards triglycerides with short and medium chain fatty acids. Among different substrates, the lipase showed the strongest binding affinity towards pNPP (Km = 0.674 mM, Vmax = 950.196 μM/min). In the experiments of its application in enhancing fatty acids flavor release for low-fat cheeses, the lipase was found to hydrolyze cheeses and mainly increase the contents of butyric acid, hexanoic acid, caprylic acid and decanoic acid. The results from NMR and GC provided the possibility of enhancing fatty acids flavor released from low-fat cheeses by the lipolysis method.

Using Molecular Simulation to Guide Protein Engineering for Biocatalysis in Organic Solvents

Biocatalysis in organic solvents (OSs) is very appealing for the industry in producing bulk and/or fine chemicals, such as pharmaceuticals, biodiesel, and fragrances. The poor performance of enzymes in OSs (e.g., reduced activity, insufficient stability, and deactivation) negates OSs' excellent solvent properties. Molecular dynamics (MD) simulations provide a complementary method to study the relationship between enzymes dynamics and the stability in OSs. Here we describe computational procedure for MD simulation of enzymes in OSs with an example of Bacillus subtilis lipase A (BSLA) in dimethyl sulfoxide (DMSO) cosolvent with software GROMACS. We discuss main essential practical issues considered (such as choice of force field, parameterization, simulation setup, and trajectory analysis). The core part of this protocol (enzyme-OS system setup, analysis of structural-based and solvation-based observables) is transferable to other enzymes and any OS systems. Combining with experimental studies, the obtained molecular knowledge is most likely to guide researchers to access rational protein engineering approaches to tailor OS resistant enzymes and expand the scope of biocatalysis in OS media. Finally, we discuss potential solutions to overcome the remaining challenges of computational biocatalysis in OSs and briefly draw future directions for further improvement in this field.

A review of synthesis of esters with aromatic, emulsifying, and lubricant properties by biotransformation using lipases

The esterification reactions catalyzed by lipases are among the most significant biochemical processes of industrial relevance. The lipases have the function of versatility by catalyzing a diversity of reactions with extreme ease, obtaining quality products with high yield. Therefore, enzyme-catalyzed esterification has gained increasing attention in many applications, due to the importance of derived products. More specifically, lipase-catalyzed esterification reactions have attracted interest in research over the past decade, due to the increased use of organic esters in the chemical and biotechnology industry. These esters can be obtained by three techniques: extraction from natural sources, chemical and enzymatic syntheses. Biotechnological processes have offered several advantages and are shown as a competitive alternative to chemical methods due to high catalytic efficiency, mild operating conditions, and selectivity of natural catalysts. These an industrial point of view, reactions catalyzed by enzymes are the most economical approach to achieve green products with no toxicity and no harm to human health. Thus, this review presents a descriptive evaluation of the trends and perspectives applied to enzymatic esterification, mainly for the synthesis of esters with different properties, such as aromatics, emulsifiers, and lubricants using the esterification process. An emphasis is given to essential factors, which affect the lipase-catalyzed esterification reaction. In which, the parameters dependent on the lipase source, a form of the biocatalyst (free or immobilized), the polarity of the reaction medium, the molar ratio between alcohol and acid, among other variables, are also discussed. This article is protected by copyright. All rights reserved.