Rhamnolipid production from waste cooking oil using Pseudomonas SWP-4

Microbial biosurfactants: Multifarious applications in sustainable agriculture

Agriculture in the 21st century faces grave challenges to meet the unprecedented food demand of the burgeoning population as well as reduce the ecological footprint for achieving sustainable development goals. The extensive use of harsh synthetic surfactants in pesticides and the agrochemical industry has substantial adverse impacts on the soil and environment due to their toxic and non-biodegradable nature. Biosurfactants derived from plant, animal, and microbial sources can be an eco-friendly alternative to chemical surfactants. Microbes producing biosurfactants play a noteworthy role in biofilm formation, plant pathogen elimination, biodegradation, bioremediation, improving nutrient bioavailability, and can thrive well under stressful environments. Microbial biosurfactants are well suited for heavy metal and organic contaminants remediation in agricultural soil due to their low toxicity, high activity at fluctuating temperatures, biodegradability, and stability over a wide array of environmental conditions. This green technology will improve the agricultural soil quality by increasing the soil flushing efficiency, mobilization, and solubilization of nutrients by forming metal-biosurfactant complexes, and through the dissemination of complex nutrients. Such characteristics help it to play a pivotal role in environmental sustainability in the foreseeable future, which is required to increase the viability of biosurfactants for extensive commercial uses, making them accessible, affordable, and economically sustainable.

Chemical and biological evaluation of biosurfactant fractions from Wickerhamomyces anomalus CCMA 0358

Biosurfactants (BS) are becoming a solution for today's world since they are considered a reasonable and eco-friendly option for use in products that require surfactants. This study aimed to evaluate the antibacterial activity of purified fractions containing biosurfactants produced by the yeast Wickerhamomyces anomalus CCMA 0358 using waste cooking oil (WCO) as substrate. Mixed fractions were separated and characterized by TLC, MPLC, GC-MS, LC-OMS, LC-SQMS, FTIR, 1H, 13C, DEPT 135, COSY, HSQC, and HMBC. The results confirmed the presence of palmitic acid and oleic acid fatty acids, derived from the core biosurfactant structure; however, the core could not be identified. The crude biosurfactant and its purified fractions were evaluated against pathogenic bacteria, and the purified fractions of the biosurfactant are more efficient at inhibitory and bactericidal activities than the crude biosurfactant. To the best of our knowledge, this is the first study that evaluated the antimicrobial activity of purified fractions of biosurfactants produced by the species Wickerhamomyces anomalus. Therefore, the purification of biosurfactants can emerge as an interesting alternative to increase the bioactivity of the compounds and ensure greater efficiency and biotechnological employability. KEY POINTS: • Successful production of a biosurfactant using a renewed carbon source. • Evaluation of the antimicrobial activity of purified fractions of BS. • Separated fractions of the BS are more efficient against bacteria than the crude BS.

Rhamnolipid production by Pseudomonas aeruginosa (SSL-4) on waste engine oil (WEO): Taguchi optimization, soil remediation, and phytotoxicity investigation

ABSTRACTEnvironmental concerns and rising biosurfactant demand emphasize the need for this study. The objective is to maximize rhamnolipid-biosurfactant production by Pseudomonas aeruginosa (SSL-4) utilizing waste engine oil (WEO) as the sole substrate for use in soil bioremediation and commercial production. Using an L16 Taguchi orthogonal array, a signal-to-noise ratio, and an analysis of variance (ANOVA), the effects of environmental (pH, incubation temperature) and dietary parameters (carbon source concentration, carbon/nitrogen (C/N) and carbon/phosphorus (C/P) ratio) are examined. Variations of the following parameters were made within a carefully selected range: incubation temperature of 25-40℃, pH range of 5-11, WEO concentration of 1-7% (v/v), and C/N and C/P ratios of 10-40. Response variables in this batch study include surface tension reduction (mN/m), dry cell biomass (DCBM) (g/L), and rhamnolipids yield based on substrate consumption, YP/S (g/g). Rhamnolipid was synthesized under optimal conditions, providing a yield of 21.42 g/g. The oil recovery of 74.05 ± 1.481% was achieved from oil-contaminated soil at a CMC of ∼70 mg/L. FTIR, 1H NMR, and UPLC-MS techniques were utilized for the characterization of rhamnolipids, and AAS for determining heavy metals concentration in WEO and residual waste engine oil (RWEO). The Germination Index (GI) of ∼82.55% indicated no phytotoxicity associated with synthesized rhamnolipid.

Improving rhamnolipids production using fermentation-foam fractionation coupling system: cell immobilization and waste frying oil emulsion

This work focused on the development of an inexpensive carbon source and the improvement of the fermentation-foam fractionation coupling system. The rhamnolipids production capacity of waste frying oil (WFO) was evaluated. The suitable bacterial cultivation of seed liquid and the addition amount of WFO was 16 h and 2% (v/v), respectively. A combined strategy of cell immobilization and oil emulsion avoid cell entrainment inside foam and improves the oil mass transfer rate. The immobilization conditions of bacterial cells into alginate-chitosan-alginate (ACA) microcapsules were optimized using the response surface method (RSM). Under the optimal conditions, rhamnolipids production using batch fermentation with immobilized strain reached 7.18 ± 0.23% g/L. WFO was emulsified into a fermentation medium using rhamnolipids as emulsifier (0.5 g/L). By monitoring dissolved oxygen, 30 mL/min was selected as a suitable air volumetric flow rate for fermentation-foam fractionation coupling operation. The total production and recovery percentage of rhamnolipids were 11.29 ± 0.36 g/L and 95.62 ± 0.38%, respectively.

Production, characterization, and kinetic modeling of biosurfactant synthesis by Pseudomonas aeruginosa gi |KP 163922|: a mechanism perspective

Kinetic studies and modeling of production parameters are essential for developing economical biosurfactant production processes. This study will provide a perspective on mechanistic reaction pathways to metabolize Waste Engine Oil (WEO). The results will provide relevant information on (i) WEO concentration above which growth inhibition occurs, (ii) chemical changes in WEO during biodegradation, and (iii) understanding of growth kinetics for the strain utilizing complex substrates. Laboratory scale experiments were conducted to study the kinetics and biodegradation potential of the strain Pseudomonas aeruginosa gi |KP 163922| over a range (0.5-8% (v/v)) of initial WEO concentration for 168 h. The kinetic models, such as Monod, Powell, Edward, Luong, and Haldane, were evaluated by fitting the experimental results in respective model equations. An unprecedented characterization of the substrate before and after degradation is presented, along with biosurfactant characterization. The secretion of biosurfactant during the growth, validated by surface tension reduction (72.07 ± 1.14 to 29.32 ± 1.08 mN/m), facilitated the biodegradation of WEO to less harmful components. The strain showed an increase in maximum specific growth rate (µ_max) from 0.0185 to 0.1415 h^-1 upto 49.92 mg/L WEO concentration. Maximum WEO degradation was found to be ~ 94% gravimetrically. The Luong model (adj. R² = 0.97) adapted the experimental data using a non-linear regression method. Biochemical, ¹H NMR, and FTIR analysis of the produced biosurfactant revealed a mixture of mono- and di- rhamnolipid. The degradation compounds in WEO were identified using FTIR, ¹H NMR, and GC-MS analysis to deduce the mechanism.

Bacterial-derived surfactants: an update on general aspects and forthcoming applications

The search for sustainable alternatives to the production of chemicals using renewable substrates and natural processes has been widely encouraged. Microbial surfactants or biosurfactants are surface-active compounds synthesized by fungi, yeasts, and bacteria. Due to their great metabolic versatility, bacteria are the most traditional and well-known microbial surfactant producers, being Bacillus and Pseudomonas species their typical representatives. To be successfully applied in industry, surfactants need to maintain stability under the harsh environmental conditions present in manufacturing processes; thus, the prospection of biosurfactants derived from extremophiles is a promising strategy to the discovery of novel and useful molecules. Bacterial surfactants show interesting properties suitable for a range of applications in the oil industry, food, agriculture, pharmaceuticals, cosmetics, bioremediation, and more recently, nanotechnology. In addition, they can be synthesized using renewable resources as substrates, contributing to the circular economy and sustainability. The article presents a general and updated review of bacterial-derived biosurfactants, focusing on the potential of some groups that are still underexploited, as well as, recent trends and contributions of these versatile biomolecules to circular bioeconomy and nanotechnology.

The release of petroleum hydrocarbons from a saline-sodic soil by the new biosurfactant-producing strain of Bacillus sp

Adsorption of old-aged petroleum hydrocarbons to the soil solid phase, which causes biosurfactant loss of performance, is among the limiting factors for the remediation of the saline-sodic soils contaminated with petroleum. Therefore, to find a functional biosurfactant in oil-contaminated saline-sodic soils, the efficiency of 39 bacteria isolated from petroleum-contaminated soils was evaluated. The strains were cultured in the Bushnell-Haas medium, and the produced biosurfactants and bioemulsifiers in this medium were extracted using chloroform/methanol and ethyl acetate extraction methods, respectively. Their partial purification was performed by column chromatography, and eventually, their performance in releasing TPH from the contaminated soil was evaluated. The soil test results revealed that the highest TPH releases due to the effects of the biosurfactants and bioemulsifier produced from SHA302, SH21, and SH72 isolates were 42.4% ± 0.2, 21.6% ± 0.15 and 24.3% ± 0.91, respectively. Based on the 16S rRNA gene sequence, the SHA302 strain showed 93.98% phylogenetic similarity with Bacillus pumilus strain ATCC 7061. The Fourier transform infrared spectroscopy and thin-layer chromatography results proved that the biosurfactants produced by isolates SHA302, SH21 and SH72 showed lipopeptide, glycolipoprotein and glycoprotein natures, respectively. The performance of the biosurfactant produced by SHA302 isolate indicated that it could be used as a good candidate for releasing TPH from saline-sodic soils with old contamination and facilitating the degradation of hydrocarbons.

Rhamnolipid Micellization and Adsorption Properties

Biosurfactants are naturally occurring amphiphiles that are being actively pursued as alternatives to synthetic surfactants in cleaning, personal care, and cosmetic products. On the basis of their ability to mobilize and disperse hydrocarbons, biosurfactants are also involved in the bioremediation of oil spills. Rhamnolipids are low molecular weight glycolipid biosurfactants that consist of a mono- or di-rhamnose head group and a hydrocarbon fatty acid chain. We examine here the micellization of purified mono-rhamnolipids and di-rhamnolipids in aqueous solutions and their adsorption on model solid surfaces. Rhamnolipid micellization in water is endothermic; the CMC (critical micellization concentration) of di-rhamnolipid is lower than that of mono-rhamnolipid, and both CMCs decrease upon NaCl addition. Rhamnolipid adsorption on gold surface is mostly reversible and the adsorbed layer is rigid. A better understanding of biosurfactant self-assembly and adsorption properties is important for their utilization in consumer products and environmental applications.

Conversion of Waste Cooking Oil to Rhamnolipid by a Newly Oleophylic Pseudomonas aeruginosa WO2

The components of waste cooking oil (WCO) are complex and contain toxic substances, which are difficult to treat biologically. Pseudomonas aeruginosa WO2 was isolated from oily sludge by an anaerobic enrichment–aerobic screening method, which could efficiently utilize WCO and produce rhamnolipid. The effects of nutrients and culture conditions on bacterial growth and lipase activity were investigated to optimize the fermentation of WCO. The results showed that strain WO2 utilized 92.25% of WCO and produced 3.03 g/L of rhamnolipid at 120 h. Compared with inorganic sources, the organic nitrogen source stabilized the pH of fermentation medium, improved lipase activity (up to 19.98 U/mL), and promoted the utilization of WCO. Furthermore, the WO2 strain exhibited inferior utilization ability of the soluble starch contained in food waste, but superior salt stress up to 60 g/L. These unique characteristics demonstrate the potential of Pseudomonas aeruginosa WO2 for the utilization of high-salinity oily organic waste or wastewater.

Designed protein multimerization and polymerization for functionalization of proteins

Abstract

Multimeric and polymeric proteins are large biomacromolecules consisting of multiple protein molecules as their monomeric units, connected through covalent or non-covalent bonds. Genetic modification and post-translational modifications (PTMs) of proteins offer alternative strategies for designing and creating multimeric and polymeric proteins. Multimeric proteins are commonly prepared by genetic modification, whereas polymeric proteins are usually created through PTMs. There are two methods that can be applied to create polymeric proteins: self-assembly and crosslinking. Self-assembly offers a spontaneous reaction without a catalyst, while the crosslinking reaction offers some catalyst options, such as chemicals and enzymes. In addition, enzymes are excellent catalysts because they provide site-specificity, rapid reaction, mild reaction conditions, and activity and functionality maintenance of protein polymers. However, only a few enzymes are applicable for the preparation of protein polymers. Most of the other enzymes are effective only for protein conjugation or labeling. Here, we review novel and applicable strategies for the preparation of multimeric proteins through genetic modification and self-assembly. We then describe the formation of protein polymers through site-selective crosslinking reactions catalyzed by enzymes, crosslinking reactions of non-natural amino acids, and protein-peptide (SpyCatcher/SpyTag) interactions. Finally, we discuss the potential applications of these protein polymers.

Graphical abstract

Bioprocesses for the recovery of bioenergy and value-added products from wastewater: A review

Wastewater and activated sludge present a major challenge worldwide. Wastewater generated from large and small-scale industries, laundries, human residential areas and other sources is emerging as a main problem in sanitation and maintenance of smart/green cities. During the last decade, different technologies and processes have been developed to recycle and purify the wastewater. Currently, identification and fundamental consideration of development of more advanced microbial-based technologies that enable wastewater treatment and simultaneous resource recovery to produce bioenergy, biofuels and other value-added compounds (organic acids, fatty acids, bioplastics, bio-pesticides, bio-surfactants and bio-flocculants etc.) became an emerging topic. In the last several decades, significant development of bioprocesses and techniques for the extraction and recovery of mentioned valuable molecules and compounds from wastewater, waste biomass or sludge has been made. This review presents different microbial-based process routes related to resource recovery and wastewater application for the production of value-added products and bioenergy. Current process limitations and insights for future research to promote more efficient and sustainable routes for this under-utilized and continually growing waste stream are also discussed.

Biodegradation of waste cooking oil and simultaneous production of rhamnolipid biosurfactant by Pseudomonas aeruginosa P7815 in batch and fed-batch bioreactor

Biosurfactants are non-toxic, surface-active biomolecules capable of reducing surface tension (ST) and emulsifying interface at a comparably lower concentration than commercial surfactants. Yet, poor yield, costlier substrates, and complex cultivation processes limit their commercial applications. This study focuses on producing biosurfactants by Pseudomonas aeruginosa P7815 in batch and fed-batch bioreactor systems using waste cooking oil (WCO) as the sole carbon source. The batch study showed a 92% of WCO biodegradation ability of P. aeruginosa producing 11 g L^-1 of biosurfactant. To enhance this biosurfactant production, a fed-batch oil feeding strategy was opted to extend the stationary phase of the bacterium and minimize the effects of substrate deprivation. An enhanced biosurfactant production of 16 g L^-1 (i.e. 1.5 times of batch study) was achieved at a feed rate of 5.7 g L^-1d^-1 with almost 94% of WCO biodegradation activity. The biosurfactant was characterized as rhamnolipid using Fourier transform infrared spectroscopy (FTIR), and its interfacial characterization showed ST reduction to 29 ± 1 mN m^-1 and effective emulsification stability at pH value of 4, temperature up to 40 °C and salinity up to 40 g L^-1. The biosurfactant exhibited antibacterial activity with minimum inhibitory concentration (MIC) values of 100 µg mL^-1 and 150 µg mL^-1 for pathogenic E. hirae and E. coli, respectively. These findings suggest that biodegradation of WCO by P. aeruginosa in a fed-batch cultivation strategy is a potential alternative for the economical production of biosurfactants, which can be further explored for biomedical, cosmetics, and oil washing/recovery applications.

Glycolipid Biosurfactant Production from Waste Cooking Oils by Yeast: Review of Substrates, Producers and Products

Biosurfactants are a microbially synthesized alternative to synthetic surfactants, one of the most important bulk chemicals. Some yeast species are proven to be exceptional biosurfactant producers, while others are emerging producers. A set of factors affects the type, amount, and properties of the biosurfactant produced, as well as the environmental impact and costs of biosurfactant’s production. Exploring waste cooking oil as a substrate for biosurfactants’ production serves as an effective cost-cutting strategy, yet it has some limitations. This review explores the existing knowledge on utilizing waste cooking oil as a feedstock to produce glycolipid biosurfactants by yeast. The review focuses specifically on the differences created by using raw cooking oil or waste cooking oil as the substrate on the ability of various yeast species to synthesize sophorolipids, rhamnolipids, mannosylerythritol lipids, and other glycolipids and the substrate’s impact on the composition, properties, and limitations in the application of biosurfactants.

Optimization and characterization of rhamnolipid production by Pseudomonas aeruginosa NY3 using waste frying oil as the sole carbon

Yield and cost are two major factors limiting the widespread use of rhamnolipids (RLs). In the present study, waste frying oil (WFO) was used as the sole carbon source to produce environmentally friendly RLs by Pseudomonas aeruginosa NY3. The Plackett-Burman design (PBD) and Box-Behnken design (BBD) methods were used to maximize the production yield of RL. The PBD results showed that the concentrations of NaNO₃ , Na₂ HPO₄ , and trace elements were the key factors affecting the yield of RL. Furthermore, the BBD results showed that at NaNO₃ , Na₂ HPO₄ , and trace elements concentrations were 4.95, 0.66, and 0.64 mL/L, respectively, the average RL yield reached 9.15 ± 0.52 g/L, 1.58-fold higher than that observed before optimization. Fourier transform infrared spectroscopy (FTIR) and liquid chromatography-ion trap-time of flight mass spectrometry (LCMS-IT-TOF) were used to elucidate the diversity of RL congeners. The results showed that, after optimization, the RL congener diversity increased, and the major RL constituent was converted from di-RLs (64.04%) to mono-RLs (60.44%). These results suggested that the concentrations of the components contained in the culture medium of P. aeruginosa NY3 influenced not only the yield of RL, but also its congener distribution.

Valorization of waste-cooking oil into sophorolipids and application of their methyl hydroxyl branched fatty acid derivatives to produce engineering bioplastics

Waste-cooking oil (WCO) is defined as vegetable oil that has been used to fry food at high temperatures. The annual global generation of WCO is 41-67 million tons. Without proper treatment, most WCO is abandoned in sinks and the solid residue of WCO is disposed of in landfills, resulting in serious environmental problems. Recycling and valorizing WCO have received considerable attention to reduce its negative impact on ecosystems. To convert WCO into a high value-added compound, we aimed to produce sophorolipids (SLs) that are industrially important biosurfactants, using WCO as a hydrophobic substrate by the fed-batch fermentation of Starmerella bombicola. The SLs concentration was increased ~3.7-fold compared with flask culture (315.6 vs. 84.8 g/L), which is the highest value ever generated from WCO. To expand the applications of SLs, we prepared methyl hydroxy branched fatty acids (MHBFAs) from SLs, which are important chemicals for various industries yet difficult to produce by chemical methods, using a bio-chemical hybrid approach. We synthesized bio-based plastics using MHBFAs as co-monomers. Compared with the control polymer without MHBFAs, even the incorporation of 1 mol% into polymer chains improved mechanical properties (such as ultimate tensile strength, 1.1-fold increase; toughness, 1.3-fold increase). To the best of our knowledge, this is the first attempt to apply MHBFAs from SLs derived from WCO to building blocks of plastics. Thus, we extended the valorization areas of WCO to one of the world's largest industries.

Investigation on spectral and biomedical characterization of rhamnolipid from a marine associated bacterium Pseudomonas aeruginosa (DKB1)

Bio-surfactants are a principal group of significant molecules obtained from the microbial sources expressed with distinctive characteristics like biodegradation of hydrocarbons and also have different biomedical properties. The present investigation aims to assess the biomedical properties of synthesized bio-surfactant, rhamnolipid from Pseudomonas aeruginosa (DKB1) under in vitro conditions. The candidate bacterium P. aeruginosa (DKB1) was isolated from oil-polluted fishing harbors of Kanyakumari coast. Initially, the bio-surfactant production by this candidate strain was confirmed by oil displacement assay, hemolytic assay, drop collapse assay and emulsification index. Further, the production of bio-surfactant was achieved through submerged fermentation process using Bushnell-Haas mineral salts medium supplemented with 2% olive oil. The yield of the bio-surfactant was attained as 2.4 g/l and confirmed as rhamnolipid through blue agar plate assay; further, the extracted rhamnolipid was purified and characterized through standard procedures. In stability studies, the rhamnolipid could withstand up to pH 12, temperature 100 °C and 15% of NaCl concentration. The biomedical application of rhamnolipid (30 μg ml^-1) was determined by antibacterial, antioxidant and cytotoxic studies. It exhibited a maximum growth inhibition against Bacillus subtilis (26 mm) with the MIC value of 8 μg ml^-1. In antioxidant test, rhamnolipid expressed significant (P < 0.0001) inhibition of total reducing power (44.11%), DPPH activity (61.60%), hydroxyl radical (83.30%) and nitric oxide (51.86%) scavenging ability at 100 μg ml^-1with the respective IC50 values of 130.50, 77.18, 52.08 and 95.43 μg ml^-1. The anticancer activity of the rhamnolipid was assessed with the help of MTT test against MCF-7, HT-29 and E-143 cancer cell lines individually, and the viability of the cells was observed, respectively, as 10.24, 17.66 and 13.50% at 250 μg ml^-1concentration with the respective IC50 values of 140.2, 81.02 and 138.9 μg ml^-1. From the results, it could be concluded that the rhamnolipid produced by P. aeruginosa (DKB1) isolated from oil-polluted area has effective biomedical properties.

Characterization of Enterobacter cloacae BAGM01 Producing a Thermostable and Alkaline-Tolerant Rhamnolipid Biosurfactant from the Gulf of Mexico

The search for novel biosurfactants (Bs) requires the isolation of microorganisms from different environments. The Gulf of Mexico (GoM) is a geographical area active in the exploration and exploitation of hydrocarbons. Recent metagenomic and microbiologic studies in this area suggested a potential richness for novel Bs microbial producers. In this work, nineteen bacterial consortia from the GoM were isolated at different depths of the water column and marine sediments. Bs production from four bacterial consortia was detected by the CTAB test and their capacity to reduce surface tension (ST), emulsion index (EI₂₄), and hemolytic activity. These bacterial consortia produced Bs in media supplemented with kerosene, diesel, or sucrose. Cultivable bacteria from these consortia were isolated and identified by bacterial polyphasic characterization. In some consortia, Enterobacter cloacae was the predominant specie. E. cloacae BAGM01 presented Bs activity in minimal medium and was selected to improve its Bs production using a Taguchi and Box-Behnken experimental design; this strain was able to grow and presented Bs activity at 35 g L^-1 of NaCl. This Bs decreased ST to around 34.5 ± 0.56 mNm^-1 and presented an EI₂₄ of 71 ± 1.27%. Other properties of this Bs were thermal stability, stability in alkaline conditions, and stability at high salinity, conferring important and desirable characteristics in multiple industries. The analysis of the genome of E. cloacae BAGM01 showed the presence of rhlAB genes that have been reported in the synthesis of rhamnolipids, and alkAB genes that are related to the degradation of alkanes. The bioactive molecule was identified as a rhamnolipid after HPLC derivatization, ¹H NMR, and UPLC-QTOF-MS analysis.

Conversion of Agroindustrial Wastes to Rhamnolipid by Enterobacter sp. UJS-RC and Its Role against Biofilm-Forming Foodborne Pathogens

Rhamnolipid is the main group of biosurfactants predominantly produced by Pseudomonas aeruginosa, a ubiquitous and opportunistic pathogen, which limits its large-scale exploitation. Thus, cost-effective rhamnolipid production from a newly isolated nonpathogenic Enterobacter sp. UJS-RC was investigated. The highest rhamnolipid production (4.4 ± 0.2 g/L) was achieved in a medium constituting agroindustrial wastes (sugarcane molasses and corn steep liquor) as substrates. Rhamnolipid exhibited reduced surface tension to 72-28 mN/m with an emulsification index of 75%. The structural analyses demonstrated the presence of methoxyl, carboxyl, and hydroxyl groups in rhamnolipid. Mass spectra indicated eight rhamnolipid congeners, where dirhamnolipid (m/z 650.01) was the dominant congener. Rhamnolipid inhibited biofilm formation of Staphylococcus aureus in a dose-dependent manner, supported by scanning electron microscopy disclosing the disruption of the microcolony/exopolysaccharide matrix. Rhamnolipid's ability to generate reactive oxygen species has thrown light on the mechanism through which the killing of test bacteria may occur.

Biosensor Design for Detection of Mercury in Contaminated Soil Using Rhamnolipid Biosurfactant and Luminescent Bacteria

In this study, a biosensor is designed to remove mercury as a toxic metal contaminant from the soil. The rhamnolipid biosurfactant was used to extract the mercury sorbed to soil to the aqueous phase. An immobilized bioluminescent bacterium (Escherichia coli MC106) with pmerRBPmerlux plasmid is assisted for mercury detection. A significant decrease in luminescence level was observed in a biosensor system containing contaminated soil sample extract. The concentrations of extracting mercury are well correlated with the mercury toxicity data obtained from experimental biosensor systems according to the RBL value. The optimum aeration rate of 20 ml/min was obtained for the biosensor systems. The advantage of such a biosensor is the in situ quantification of mercury as a heavy metal contaminant in soils. Therefore, this system could be proposed as a good biosensor-based alternative for future detection of heavy toxic metals in soils.

Assessing the impact of industrial waste on environment and mitigation strategies: A comprehensive review

The increasing demand of rising population leads to the escalation of industrial sectors such as agro-, food-, paper and pulp industries. These industries generated hazardous waste which is primarily organic in nature thus is being dumped or processed in the environment. These waste leads to increasing contamination leading to increased mortality, physical and morphological changes in the organisms/animals in contact. Although the generated waste is hazardous yet it predominantly contains macromolecules and bioactive compounds thus can be efficiently utilized for the extraction and production of value added products. This article reviews the effect of these waste streams on terrestrial and aquatic ecosystems. Since these wastes abundantly contain proteins, lipids, carbohydrates and lignocelluloses thus recycling, reuse and valorization offers an effective strategy for their reduction while comforting the environment. The policies laid down by national and international agencies that directs these industries for reducing the generation of waste and increasing the recyclability and reuse of the generated waste is discussed and the gaps and bottlenecks for these is identified. This study essentially provides the state-of-art information on above aspects by identifying the gaps for future research directions and may contribute in policy development for mitigation strategies.

Enhanced biodegradation of crude oil in soil by a developed bacterial consortium and indigenous plant growth promoting bacteria

AIMS

This study aimed to develop an efficient, cost-effective and eco-friendly bacterial consortium to degrade petroleum sludge.

METHODS AND RESULTS

Four bacterial strains belonging to genera Acinetobacter and Pseudomonas were selected to constitute three different consortia based on their initial concentration. The highest degradation rate (78%) of 1% (v/v) crude oil after 4 weeks of incubation was recorded when the concentration of biosurfactant (BS) producing isolate was high. Genes, such as alkB, almA, cyp153, pah-rhdGN, nah, phnAC and cat23 were detected using the polymerase chain reaction method and their induction levels were optimal at pH 7·0. A crude oil sludge was artificially constituted, and its bacterial composition was investigated using 16S rRNA gene amplicon sequencing. The results showed that the soil bacterial community was dominated by plant growth-promoting bacteria (PGPB) after crude oil treatment.

CONCLUSIONS

Our findings indicate the decontamination of the crude oil contaminated soil was more effective in the presence of both the constituted consortium and PGPB compared to the presence of PGPB alone.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study showed that the PGPB (Taibaiella) present in petroleum uncontaminated soil can promote the soil decontamination. The addition of both efficient hydrocarbon-degrading and BS producing bacteria is also necessary to improve the decontamination.

Recent advancements in the production of rhamnolipid biosurfactants by Pseudomonas aeruginosa

Rhamnolipid (RL) biosurfactant which is produced by Pseudomonas species is one of the most effective surface-active agents investigated in the literature. Over the years, many efforts have been made and an array of techniques has been developed for the isolation of RL produced strains as well as RL homolog characterization. Reports show that RL productivity by the best-known producer, Pseudomonas aeruginosa, is very diverse, from less than 1 gr/l to more than 200 g L-1. There are some major parameters that can affect RL productivity. These are culture conditions, medium composition, the mode of operation (batch, fed-batch and continuous), bioengineering/gene manipulation and finally extraction methods. The present paper seeks to provide a comprehensive overview on the production of rhamnolipid biosurfactant by different species of Pseudomonas bacteria. In addition, we have extensively reviewed their potential for possible future applications.

Eco-friendly biosurfactant from Wickerhamomyces anomalus CCMA 0358 as larvicidal and antimicrobial

Kitchen waste oil (KWO) was evaluated as a substrate for production of biosurfactant by Wickerhamomyces anomalus CCMA 0358 and was tested against Aedes aegypti larvae, the mosquito causing neglected diseases, such as dengue fever, Zika, and Chikungunya, achieving 100 % mortality in the lowest concentration (6.25 %) evaluated in 24 h. Furthermore, possible applications of this compound were evaluated as antibacterial, antiadhesive, and antifungal. At a concentration of 50 %, the biosurfactant was found to inhibit the growth of Bacillus cereus, showing high inhibitions levels against Salmonella Enteritidis, Staphylococcus aureus, and Escherichia coli. The antifungal activity was evaluated against Aspergillus, Cercospora, Colletotrichum, and Fusarium, obtaining results of up to 95 % inhibition. In addition to these promising results, the yeast W. anomalus produced the biosurfactant from an inexpensive substrate, which increases the possibility of its application in several industries owing to the low cost involved.

Biotechnological Applications of Paenibacillus sp. D9 Lipopeptide Biosurfactant Produced in Low-cost Substrates

The present study assesses the Paenibacillus sp. D9 lipopeptide biosurfactant synthesis in cheap substrates including functional properties and applicability for varying biotechnological processes. Different experimental setups were made for oil dispersion, heavy metals removals from contaminated environments, and washing performance. The study revealed surface tension activities of 31.7-32.7 mN/m, and maximum biosurfactant yield of more than 8 g/L. Removals of 85.90%, 98.68%, 99.97%, 63.28%, 99.93%, and 94.22% were obtained for Ca, Cu, Fe, Mg, Ni, and Zn, respectively from acid mine effluents. In comparison with chemical surfactants, there was pronounced removal of heavy metals from wastewater, contaminated sands, and vegetable matter, as well as improved oil dispersing activity. A comparative study revealed that biosurfactant was more efficient (> 60%) for removal of tomato sauce and coffee stains than chemical surfactants (< 50%). Thus, lipopeptide biosurfactants are green biomolecules reducing hazards and contaminations within the environment. The future use of this lipopeptide biosurfactant is greatly promising in biotechnology.

Bioconversion of Calophyllum inophyllum oilcake for intensification of rhamnolipid and polyhydroxyalkanoates co-production by Enterobacter aerogenes

The biologically derived products are highly valued due to their biodegradability, low toxicity, and renewability. However, most production processes are exorbitant due to high raw material cost and the downstream processing required for product recovery and purification. Therefore, the present study utilized the low-cost lignocellulosic biomass, Calophyllum inophyllum oilcake for the simultaneous production of PHA and rhamnolipid by a facultative anaerobe Enterobacter aerogenes. Both the products are produced during the stationary phase and constitute β- hydroxyalkanoic acids, which makes it feasible for the co-production through a single fermentation process. From the batch fermentation studies, it was revealed that the under optimum condition rhamnolipid and PHA yield are 5.81 g/L and 4.2 g/L: 5%(v/v) of inoculum size, pH of 6.5, C:N ratio of 5:1 and urea are found to be the best nitrogen source for the fermentation process. Characterization studies for extracted PHA and RL was done using- FTIR, NMR and TGA analysis.

Biosurfactant: A new frontier for greener technology and environmental sustainability

Petroleum hydrocarbons, oil, heavy metals pollution is becoming additional severe problem due to the growing call for crude oil and crude oil products related products in several fields of application. Such pollution have fascinated much considerations and attractions as it leads to ecological damages in both marines, aquatic and terrestrial ecosystems. Thus, different techniques including chemical surfactants and complex technologies have been proposed for their clean up from the environment, which in turn has detrimental effects on the environment. As of late, biosurfactant compounds have added much deliberation since they are considered as a reasonable option and eco-accommodating materials for remediation technology. The present society is confronting a few difficulties of usage, authorizing ecological protection and environmental change for the next generations. Biosurfactants hold the special property of minimizing and reducing the interfacial tension of liquids. Such features endure biosurfactants to afford a major part in emulsification, de-emulsification, biodegradability, foam formation, washing performance, surface activity, and detergent formulation, which have potential applications in the diverse industrial set-up. Conversations on cost-effective technologies, renewable materials, novel synthesis, downstream, upstream, emerging characterization techniques, molecular, and genetical engineering are substantial to produce biosurfactant of quality and quantity. Therefore, greater attention is being paid to biosurfactant production by identifying their environmental, and biotechnological applications. Be that as it may, the extravagant cost drew in with biosurfactants biotechnological synthesis and recovery can hamper their application in those areas. Notwithstanding these costs, biosurfactants can be used as these parts shows outstandingly high benefits that can at present beat the expenses incurred in the initial purification and downstream processes. Biosurfactant production by microorganisms is relatively considered one of the crucial know-how for improvement, growth, advancement, and environmental sustainability of the 21st century. There is a developing conversation around environmental safety and the significant role that biosurfactants will progressively play soon, for instance, the use of renewable by-products as substrates, potential reduction, re-use and recycling of waste and waste products. The review confers the usefulness of biosurfactants in the removal of environmental contaminants and, consequently, expanding environmental safety and drive towards greener technology.

Optimization of biosurfactant production by Bacillus Subtilis N3-1P using the brewery waste as the carbon source

Biosurfactants are biologically produced by microorganisms and therefore biodegradable, making ideal substitutes to chemical surfactants for various applications. Large scale production of biosurfactants is limited because of the high cost. The production cost could be reduced by optimizing cultural conditions and using wastes as substrates. In this work, the response surface methodology (RSM) was used to optimize biosurfactant production by Bacillus subtilis N3-1P strain using brewery waste as the sole carbon source. Five independent variables were varied; carbon and nitrogen concentration, agitation speed, temperature and initial pH. Surface tension and emulsification index were used to measure biosurfactant production. Results indicated that the 'best' surface tension and emulsification index were 27.31 mN m^-1 and 63.11%, respectively, under optimized cultural conditions (7% (v v^-1) brewery waste, 6.22 g L^-1 ammonium nitrate, initial pH of 6.41, 150 rpm, and 27°C). The predicted responses were validated experimentally under the 'optimum' conditions, and 657 mg L^-1 of biosurfactant was produced with a critical micelle concentration of 107 mg L^-1.

Fungichromin Production by Streptomyces padanus PMS-702 for Controlling Cucumber Downy Mildew

Streptomyces padanus PMS-702 strain produces a polyene macrolide antibiotic fungichromin and displays antagonistic activities against many phytopathogenic fungi. In the present study, experimental formulations were assessed to improve the production of fungichromin, the efficacy of PMS-702 on the suppression of sporangial germination, and the reduction of cucumber downy mildew caused by Pseudoperonospora cubensis. PMS-702 strain cultured in a soybean meal-glucose (SMG) medium led to low levels of fungichromin accumulation and sporangial germination suppression. Increasing medium compositions and adding plant oils (noticeably coconut oil) in SMG significantly increased fungichromin production from 68 to 1,999.6 μg/ml. Microscopic examination reveals that the resultant suspensions significantly reduced sporangial germination and caused cytoplasmic aggregation. Greenhouse trials reveal that the application of PMS-702 cultural suspensions reduced downy mildew severity considerably. The addition of Tween 80 into the synthetic medium while culturing PMS-702 further increased the suppressive efficacy of downy mildew severity, particularly when applied at 24 h before inoculation or co-applied with inoculum. Fungichromin at 50 μg/ml induced phytotoxicity showing minor necrosis surrounded with light yellowish halos on cucumber leaves. The concentration that leads to 90% inhibition (IC90) of sporangial germination was estimated to be around 10 μg/ml. The results provide a strong possibility of using the S. padanus PMS-702 strain as a biocontrol agent to control other plant pathogens.

Development of Palm Fatty Acid Distillate-Containing Medium for Biosurfactant Production by Pseudomonas sp. LM19

High production costs of biosurfactants are mainly caused by the usage of the expensive substrate and long fermentation period which undermines their potential in bioremediation processes, food, and cosmetic industries even though they, owing to the biodegradability, lower toxicity, and raise specificity traits. One way to circumvent this is to improvise the formulation of biosurfactant-production medium by using cheaper substrate. A culture medium utilizing palm fatty acid distillate (PFAD), a palm oil refinery by-product, was first developed through one-factor-at-a-time (OFAT) technique and further refined by means of the statistical design method of factorial and response surface modeling to enhance the biosurfactant production from Pseudomonas sp. LM19. The results shows that, the optimized culture medium containing: 1.148% (v/v) PFAD; 4.054 g/L KH₂PO₄; 1.30 g/L yeast extract; 0.023 g/L sodium-EDTA; 1.057 g/L MgSO₄·7H₂O; 0.75 g/L K₂HPO₄; 0.20 g/L CaCl₂·2H₂O; 0.080 g/L FeCl₃·6H₂O gave the maximum biosurfactant productivity. This study demonstrated that the cell concentration and biosurfactant productivity could reach up to 8.5 × 10⁹ CFU/mL and 0.346 g/L/day, respectively after seven days of growth, which were comparable to the values predicted by an RSM regression model, i.e., 8.4 × 10⁹ CFU/mL and 0.347 g/L/day, respectively. Eleven rhamnolipid congeners were detected, in which dirhamnolipid accounted for 58% and monorhamnolipid was 42%. All in all, manipulation of palm oil by-products proved to be a feasible substrate for increasing the biosurfactant production about 3.55-fold as shown in this study.

Mechanisms for rhamnolipids-mediated biodegradation of hydrophobic organic compounds

The widespread existence of hydrophobic organic compounds (HOCs) in soil and water poses a potential health hazard to human, such as skin diseases, heart diseases, carcinogenesis, etc. Surfactant-enhanced bioremediation has been regarded as one of the most viable technologies to treat HOCs contaminated soil and groundwater. As a biosurfactant that has been intensively studied, rhamnolipids have shown to enhance biodegradation of HOCs in the environment, however, the underlying mechanisms are not fully disclosed. In this paper, properties and production of rhamnolipids are summarized. Then effects of rhamnolipids on the biodegradation of HOCs, including solubilization, altering cell affinity to HOCs, and facilitating microbial uptake are reviewed in detail. Special attention is paid to how rhamnolipids change the bioavailability of HOCs, which are crucial for understanding the mechanism of rhamnolipids-mediated biodegradation. The biodegradation and toxicity of rhamnolipids are also discussed. Finally, perspectives and future research directions are proposed. This review adds insight to rhamnolipids-enhanced biodegradation process, and helps in application of rhamnolipids in bioremediation.

Optimization and characterization of biosurfactant production from kitchen waste oil using Pseudomonas aeruginosa

Kitchen waste oil (KWO) from catering industries or households was used as a low-cost carbon source for producing biosurfactants by self-isolated Pseudomonas aeruginosa. Fermentation performance with KWO was superior to those with four other carbon sources, with higher optical density (OD₆₀₀) of 2.33 and lower interfacial tension of 0.57 mN/m. Culture conditions for biosurfactant production were optimized, with optimal pH of 8.0 and nitrogen source concentration of 2.0 g/L, respectively. The results of infrared spectroscopy and liquid chromatography-mass spectrometry (LC-MS) showed that the biosurfactant was a mixture of six rhamnolipid congeners, among which Rha-Rha-C₁₀-C₁₀ and Rha-C₁₀-C₁₀ were the main components, with mass fraction of approximately 34.20 and 50.86%, respectively. The critical micelle concentration (CMC) obtained was 55.87 mg/L. In addition, the rhamnolipids exhibited excellent tolerance to temperature (20-100 °C), pH (6.0-12.0), and salinity (2-20%; w/v) in a wide range, thereby showing good stability to extreme environmental conditions. The rhamnolipids positively affected oil removal from oil sludge and KWO-contaminated cotton cloth, with removal rate of 34.13 and of 30.92%, respectively. Our results demonstrated that biosurfactant production from KWO was promising, with advantages of good performance, low cost and environmental safety.

Pseudomonas rhizophila S211, a New Plant Growth-Promoting Rhizobacterium with Potential in Pesticide-Bioremediation

A number of Pseudomonas strains function as inoculants for biocontrol, biofertilization, and phytostimulation, avoiding the use of pesticides and chemical fertilizers. Here, we present a new metabolically versatile plant growth-promoting rhizobacterium, Pseudomonas rhizophila S211, isolated from a pesticide contaminated artichoke field that shows biofertilization, biocontrol and bioremediation potentialities. The S211 genome was sequenced, annotated and key genomic elements related to plant growth promotion and biosurfactant (BS) synthesis were elucidated. S211 genome comprises 5,948,515 bp with 60.4% G+C content, 5306 coding genes and 215 RNA genes. The genome sequence analysis confirmed the presence of genes involved in plant-growth promoting and remediation activities such as the synthesis of ACC deaminase, putative dioxygenases, auxin, pyroverdin, exopolysaccharide levan and rhamnolipid BS. BS production by P. rhizophila S211 grown on olive mill wastewater based media was effectively optimized using a central-composite experimental design and response surface methodology (RSM). The optimum conditions for maximum BS production yield (720.80 ± 55.90 mg/L) were: 0.5% (v/v) inoculum size, 15% (v/v) olive oil mill wastewater (OMWW) and 40°C incubation temperature at pH 6.0 for 8 days incubation period. Biochemical and structural characterization of S211 BS by chromatography and spectroscopy studies suggested the glycolipid nature of the BS. P. rhizophila rhamnolipid was stable over a wide range of temperature (40-90°C), pH (6-10), and salt concentration (up to 300 mM NaCl). Due to its low-cost production, emulsification activities and high performance in solubilization enhancement of chemical pesticides, the indigenous BS-producing PGPR S211 could be used as a promising agent for environmental bioremediation of pesticide-contaminated agricultural soils.

Rhamnolipid as new bio-agent for cleaning of ultrafiltration membrane fouled by whey

In this work, rhamnolipid biosurfactant as an eco-friendly and biodegradable cleaning agent was produced by Pseudomonas aeruginosa bacteria and was used to evaluate the chemical cleaning efficiency of whey fouled ultrafiltration membranes. Thin layer chromatography (TLC) and Fourier transform infrared spectroscopy (FTIR) confirmed the successful synthesis of rhamnolipid. The produced rhamnolipid was compared to chemical cleaners including sodium hydroxide (NaOH), sodium dodecyl sulfate (SDS) and Tween 20. Ultrafiltration membranes used for fouling and cleaning analysis were prepared using phase inversion via immersion precipitation technique. For studying the fouling mechanisms, Hermia's model adapted to cross-flow was used. From the fouling mechanism experiments, it was found that the complete blocking and cake formation were the dominant fouling mechanisms. The highest values of cleaning efficiency were achieved using rhamnolipid and NaOH as cleaning agents with the flux recovery of 100%, but with considering the low concentration of the rhamnolipid used in the cleaning solution compared to NaOH (0.3 versus 4 g/L for NaOH), its application is preferred.

Advances in applications of rhamnolipids biosurfactant in environmental remediation: A review

The objective of this review is to provide a comprehensive overview of the advances in the applications of rhamnolipids biosurfactants in soil and ground water remediation for removal of petroleum hydrocarbon and heavy metal contaminants. The properties of rhamnolipids associated with the contaminant removal, that is, solubilization, emulsification, dispersion, foaming, wetting, complexation, and the ability to modify bacterial cell surface properties, were reviewed in the first place. Then current remediation technologies with integration of rhamnolipid were summarized, and the effects and mechanisms for rhamnolipid to facilitate contaminant removal for these technologies were discussed. Finally rhamnolipid-based methods for remediation of the sites co-contaminated by petroleum hydrocarbons and heavy metals were presented and discussed. The review is expected to enhance our understanding on environmental aspects of rhamnolipid and provide some important information to guide the extending use of this fascinating chemical in remediation applications.

Optimization of rhamnolipid production from Pseudomonas aeruginosa PBS towards application for microbial enhanced oil recovery

The present work reveals the potential of biosurfactant producing P. aeruginosa PBS for microbial enhanced oil recovery (MEOR). The biosurfactant production medium and culture conditions were optimized using response surface methodology. The optimization of media components and process parameters was consecutively executed in two sets of experimental runs designed by central composite rotatable design (CCRD). The maximum biosurfactant yield was attained with 2% fresh inoculum of P. aeruginosa PBS in minimal salt medium (pH 7), possessing 2.17% sodium citrate as C-source and 0.5% yeast extract as N-source, after 48 h upon incubation at 30 °C/150 rpm. Under optimum conditions, biosurfactant yield was increased more than threefold and turned out to be 2.65 g/L as compared to 0.82 g/L under previous conditions. The biosurfactant was characterized as a glycolipid comprising of four rhamnolipid homologs (RhaRhaC₁₀C₁₀, RhaRhaC₈C₁₀, RhaRhaC₁₂C₁₀/RhaRhaC₁₀C₁₂, RhaC₁₀C₁₀) by thin layer chromatography, fourier transform infrared spectroscopy, nuclear magnetic resonance and mass spectrometry. The produced biosurfactant was highly efficient for oil recovery application showing extreme reduction in surface tension of medium (71.80 to 23.76 mN/m), immense hydrocarbons emulsification capacity (50-60%) and greater stability at wide range of temperature (4-100 °C) and pH (4-10) along with an excellent (56.18 ± 1.59%) additional oil recovery in sand-pack column lab test.