Ce and Er Co-doped TiO2 for rapid bacteria- killing using visible light

Trends and Advances in Antimicrobial Surface Modification for Orthopedic Implants (2014-2024)

The failure of orthopedic implants can significantly impact patients physiologically, psychologically, and economically. A bibliometric study of the field of surface modification for antimicrobial purposes in orthopedic implants provides insights into its developmental trajectory and offers valuable predictions for future advancements, thus playing a pivotal role in guiding research in this domain. Relevant publications on surface modification for antimicrobial purposes in orthopedic implants published between 2014 and 2024 were selected from the Web of Science (Core Collection) dataset and analyzed using VOSviewer and Citespace. The analysis encompassed 725 articles. Over the past decade, there has been a steady increase in the number of publications related to surface modification for antimicrobial purposes in orthopedic implants, with China emerging as the primary contributor. Novel antimicrobial materials development, osteogenesis, and angiogenesis have become focal areas of research interest in this domain. Surface modification for antimicrobial purposes in orthopedic implants garners increasing attention. Research in this field is anticipated to expand, with future focus likely to revolve around novel material applications, repair outcomes, and underlying mechanisms.

Visible light-responsive TiO2-based hybrid nanofiller reinforced multifunctional chitosan film for effective fruit preservation

In this study, we developed a multifunctional chitosan film with visible light-responsive photocatalytic properties by incorporating a novel nanofiller-a nanohybrid particle of poly(tannic acid) (PTA) and TiO2 (TP-NPs). Firstly, the hybridization of TiO2 with PTA not only improved its dispersion but also obtained TP-NPs with smaller band gaps (from 3.11 eV to 1.55 eV) and higher separation efficiency of photogenerated e--h+ (about 1.5-fold enhancement), thereby producing more reactive oxygen species and enhancing the antibacterial efficacy (compared with TiO2, the antibacterial effect of TP-NPs on Staphylococcus aureus and Escherichia coli was heightened by about 2 times under visible light for 1 h). Secondly, TP-NPs were hydrogen bonded with chitosan, strengthening its mechanical and barrier properties, while imparting exceptional antibacterial efficacy. Moreover, the multifunctional properties enabled the active film to effectively delay the quality deterioration of grapes and kiwifruit. Hence, this study presented a multifunctional active packaging film tailored for fruit preservation.

Effect of Surface Anions Adsorbed by Rutile TiO2 (001) on Photocatalytic Nitrogen Reduction Reaction: A Density Functional Theory Calculation

The adsorption of common anions found in water can have a considerable impact on the surface state and optical characteristics of titanium dioxide (TiO2), which has an important impact on the photocatalytic nitrogen reduction reaction (NRR). This work utilizes density functional theory (DFT) computations to examine the electronic and optical characteristics of the TiO2 (001) surface under various anion adsorptions in order to clarify their influence on the photocatalytic NRR of TiO2. The modifications in the structure, optical, and electronic properties of TiO2 before and after anion adsorption are investigated. In addition, the routes of Gibbs free energy for the NRR are also evaluated. The results indicate that the adsorption of anions modifies the surface characteristics of TiO2 to a certain degree, hence impacting the separating and recombining charge carriers by affecting the energy gap of TiO2. More importantly, the adsorption of anions can increase the energy barriers for the NRR, thereby exerting a detrimental effect on its photocatalytic activity. These findings provide a valuable theoretical contribution to understanding the photocatalytic reaction process of TiO2 and its potential application of NRR in the actual complex water phase.

Photochemical Strategies toward Precision Targeting against Multidrug-Resistant Bacterial Infections

Infectious diseases pose a serious threat and a substantial economic burden on global human and public health security, especially with the frequent emergence of multidrug-resistant (MDR) bacteria in clinical settings. In response to this urgent need, various photobased anti-infectious therapies have been reported lately. This Review explores and discusses several photochemical targeted antibacterial therapeutic strategies for addressing bacterial infections regardless of their antibiotic susceptibility. In contrast to conventional photobased therapies, these approaches facilitate precise targeting of pathogenic bacteria and/or infectious microenvironments, effectively minimizing toxicity to mammalian cells and surrounding healthy tissues. The highlighted therapies include photodynamic therapy, photocatalytic therapy, photothermal therapy, endogenous pigments-based photobleaching therapy, and polyphenols-based photo-oxidation therapy. This comprehensive exploration aims to offer updated information to facilitate the development of effective, convenient, safe, and alternative strategies to counter the growing threat of MDR bacteria in the future.

Photocatalytic Antimicrobials: Principles, Design Strategies, and Applications

Nowadays, the increasing emergence of antibiotic-resistant pathogenic microorganisms requires the search for alternative methods that do not cause drug resistance. Phototherapy strategies (PTs) based on the photoresponsive materials have become a new trend in the inactivation of pathogenic microorganisms due to their spatiotemporal controllability and negligible side effects. Among those phototherapy strategies, photocatalytic antimicrobial therapy (PCAT) has emerged as an effective and promising antimicrobial strategy in recent years. In the process of photocatalytic treatment, photocatalytic materials are excited by different wavelengths of lights to produce reactive oxygen species (ROS) or other toxic species for the killing of various pathogenic microbes, such as bacteria, viruses, fungi, parasites, and algae. Therefore, this review timely summarizes the latest progress in the PCAT field, with emphasis on the development of various photocatalytic antimicrobials (PCAMs), the underlying antimicrobial mechanisms, the design strategies, and the multiple practical antimicrobial applications in local infections therapy, personal protective equipment, water purification, antimicrobial coatings, wound dressings, food safety, antibacterial textiles, and air purification. Meanwhile, we also present the challenges and perspectives of widespread practical implementation of PCAT as antimicrobial therapeutics. We hope that as a result of this review, PCAT will flourish and become an effective weapon against pathogenic microorganisms and antibiotic resistance.

Synthesis of TiO2-Cu2+/CuI Nanocomposites and Evaluation of Antifungal and Cytotoxic Activity

Fungal infections have become a significant public health concern due to their increasing recurrence and harmful effects on plants, animals, and humans. Opportunistic pathogens (among others from the genera Candida and Aspergillus) can be present in indoor air, becoming a risk for people with suppressed immune systems. Engineered nanomaterials are novel alternatives to traditional antifungal therapy. In this work, copper(I) iodide (CuI) and a copper-doped titanium dioxide-copper(I) iodide (TiO₂-Cu²⁺/CuI) composite nanomaterials (NMs)-were synthesized and tested as antifungal agents. The materials were synthesized using sol-gel (TiO₂-Cu²⁺) and co-precipitation (CuI) techniques. The resulting colloids were evaluated as antifungal agents against Candida parapsilosis and Aspergillus niger strains. The NMs were characterized by XRD, HRTEM, AFM, and DLS to evaluate their physicochemical properties. The NMs present a high size dispersion and different geometrical shapes of agglomerates. The antifungal capacity of the NMs by the minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) was below 15 µg/mL against Candida parapsilosis and below 600 µg/mL against Aspergillus niger for both NMs. Holotomography microscopy showed that the NMs could penetrate cell membranes causing cell death through its rupture and reactive oxygen species (ROS) production. Cytotoxicity tests showed that NMs could be safe to use at low concentrations. The synthesized nanomaterials could be potential antifungal agents for biomedical or environmental applications.

Photocatalytic and Antimicrobial Properties of Electrospun TiO2-SiO2-Al2O3-ZrO2-CaO-CeO2 Ceramic Membranes

In this study, TiO₂-based ceramic nanofiber membranes in the system of TiO₂-SiO₂-Al₂O₃-ZrO₂-CaO-CeO₂ were synthesized by combining sol-gel and electrospinning processes. In order to investigate the thermal treatment temperature effect, the obtained nanofiber membranes were calcined at different temperatures ranging from 550 to 850 °C. Different characterization methods such as X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), and high-resolution transmission electron microscopy (HR-TEM) were conducted on the obtained membranes to investigate the structural and morphological properties of the nanofibers. The Brunauer-Emmett-Teller surface area of the nanofiber membranes was very high (46.6-149.2 m²/g) and decreased with increasing calcination temperature as expected. Photocatalytic activity investigations were determined using methylene blue (MB) as a model dye under UV and sunlight irradiation. High degradation performances were achieved with the calcination temperatures of 650 and 750 °C because of the high specific surface area and the anatase structure of the nanofiber membranes. Moreover, the ceramic membranes showed antibacterial activity against Escherichia coli as a Gram-negative bacterium and Staphylococcus aureus as a Gram-positive bacterium. The superior properties of the novel TiO₂-based multi-oxide nanofiber membranes proved as a promising candidate for various industries, especially the removal of textile dyes from wastewater.

A novel full solar light spectrum responsive antimicrobial agent of WS2 quantum dots for photocatalytic wound healing therapy

Photocatalytic antimicrobial therapy (PCAT) is considered to be a potential therapeutic treatment for bacterial-infection diseases. However, the antibacterial efficiency is unsatisfactory due to the limited application scope of photocatalysis. In this work, full-spectrum responsive tungsten disulfide quantum dots (WS₂ QDs) are prepared for killing bacteria and enabling wound healing through photocatalytic reactive oxygen species (ROS) generation and glutathione (GSH) depletion. On the one hand, these ultrasmall WS₂ QDs exhibit an excellent full spectrum (UV-Vis-NIR)-responsive photocatalytic effect by hindering the recombination of electron-hole pairs, thereby achieving the full use of the energy spectrum. Furthermore, the full-spectrum photocatalytic property of the as-prepared WS₂ QDs can be effectively strengthened by redox reaction to deplete GSH for accelerated wound healing. In a word, the as-prepared nanoplatform exhibits the ability to act as an admirable antibacterial reagent with full-spectrum catalytic performance for photocatalytic wound healing therapy. Therefore, this work will not only provide an effective full-spectrum photocatalytic reagent for anti-bacteria therapy and wound healing, but also provide a rational idea for the development of other novel antibacterial agents for applications in the biomedical field.

ALD-induced TiO2/Ag nanofilm for rapid surface photodynamic ion sterilization

The daily life of people in the intelligent age is inseparable from electronic device, and a number of bacteria on touch screens are increasingly threatening the health of users. Herein, a photocatalytic TiO₂/Ag thin film was synthesized on a glass by atomic layer deposition and subsequent in situ reduction. Ultraviolet-visible (UV-Vis) spectra showed that this film can harvest the simulated solar light more efficiently than that of pristine TiO₂. The antibacterial tests in vitro showed that the antibacterial efficiency of the TiO₂/Ag film against S. aureus and E. coli was 98.2% and 98.6%, under visible light irradiation for 5 min. The underlying mechanism was that the in-situ reduction of Ag on the surface of TiO₂ reduced the bandgap of TiO₂ from 3.44 to 2.61 eV due to the formation of Schottky heterojunction at the interface between TiO₂ and Ag. Thus, TiO₂/Ag can generate more reactive oxygen species for bacterial inactivation on the surface of electronic screens. More importantly, the TiO₂/Ag film had great biocompatibility with/without light irradiation. The platform not only provides a more convenient choice for the traditional antibacterial mode but also has limitless possibilities for application in the field of billions of touch screens.

A high-hydrophilic Cu2O-TiO2/Ti2O3/TiO coating on Ti-5Cu alloy: Perfect antibacterial property and rapid endothelialization potential

In order to make novel antibacterial Ti-Cu alloy more suitable for cardiovascular implant application, a Cu-containing oxide coating was manufactured on Ti-Cu alloy by plasma-enhanced oxidation deposition in plasma enhanced chemical vapor deposition (PECVD) equipment to further improve the antibacterial ability and the surface bioactivity. The results of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and water contact angle indicated that a sustainably high-hydrophilic Cu₂O-TiO₂/Ti₂O₃/TiO coating with nano-morphology on Ti-5Cu was successfully constructed. The corrosion performance results showed that the coating enhanced the corrosion resistance while releasing more Cu²⁺, compared with Ti-5Cu. Antibacterial tests confirmed the perfect antibacterial property of the coating (R ≥ 99.9 %), superior to Ti-Cu alloy (R > 90 %). More delightfully, it was observed by phalloidin-FITC and DAPI staining that the coating improved the early adhesion of HUVEC cells mainly due to strong hydrophilicity and nano-morphology. It was demonstrated that the extract of the coated sample significantly promoted proliferation (RGR = 112 %-138 % after cultivation for 1 to 3 days) and migration of HUVEC cells due to the appropriate Cu²⁺ release concentration. Hemolysis assay and platelet adhesion results showed that the coating had excellent blood compatibility. All results suggested that the coating on Ti-Cu alloy might be a promising surface with the perfect antibacterial ability, blood compatibility and evident promoting endothelialization ability for the cardiovascular application.

Contact-Free Remote Manipulation of Hydrogel Properties Using Light-Triggerable Nanoparticles: A Materials Science Perspective for Biomedical Applications

Considerable progress has been made in synthesizing "intelligent", biodegradable hydrogels that undergo rapid changes in physicochemical properties once exposed to external stimuli. These advantageous properties of stimulus-triggered materials make them highly appealing to diverse biomedical applications. Of late, research on the incorporation of light-triggered nanoparticles (NPs) into polymeric hydrogel networks has gained momentum due to their ability to remotely tune hydrogel properties using facile, contact-free approaches, such as adjustment of wavelength and intensity of light source. These multi-functional NPs, in combination with tissue-mimicking hydrogels, are increasingly being used for on-demand drug release, preparing diagnostic kits, and fabricating smart scaffolds. Here, the authors discuss the atomic behavior of different NPs in the presence of light, and critically review the mechanisms by which NPs convert light stimuli into heat energy. Then, they explain how these NPs impact the mechanical properties and rheological behavior of NPs-impregnated hydrogels. Understanding the rheological behavior of nanocomposite hydrogels using different sophisticated strategies, including computer-assisted machine learning, is critical for designing the next generation of drug delivery systems. Next, they highlight the salient strategies that have been used to apply light-induced nanocomposites for diverse biomedical applications and provide an outlook for the further improvement of these NPs-driven light-responsive hydrogels.

Fabrication and Photocatalytic Properties of Electrospun Fe-Doped TiO2 Nanofibers Using Polyvinyl Pyrrolidone Precursors

For the removal of pollutants, a modified TiO₂ photocatalyst is attracting attention. Fe-doped TiO₂ nanofibers were prepared through a combination of electrospinning and calcination. Morphological characterization of the sample was conducted using field-emission scanning electron and transmission electron microscopy. The crystal structure of each sample was analyzed using high-resolution transmission electron microscopy, selected area electron diffraction, and Fast Fourier Transform imaging. The average diameter of the Fe-doped TiO₂ nanofibers was measured to be 161.5 nm and that of the pure TiO₂ nanofibers was 181.5 nm. The crystal phase when heat treated at 350 °C was anatase for TiO₂ nanofibers and rutile for Fe-doped TiO₂ nanofibers. The crystal phase of the TiO₂ matrix was easily transitioned to rutile by Fe-doping. The photocatalytic performance of each sample was compared via the photodegradation of methylene blue and acid orange 7 under ultraviolet and visible light irradiation. In the Fe-doped TiO₂ nanofibers, photodegradation rates of 38.3% and 27.9% were measured under UV irradiation and visible light, respectively. Although other catalysts were not activated, the photodegradation rate in the Fe-doped TiO₂ nanofibers was 9.6% using acid orange 7 and visible light. For improved photocatalytic activity, it is necessary to study the concentration control of the Fe dopant.

The recent progress on metal-organic frameworks for phototherapy

Some infectious or malignant diseases such as cancers are seriously threatening the health of human beings all over the world. The commonly used antibiotic therapy cannot effectively treat these diseases within a short time, and also bring about adverse effects such as drug resistance and immune system damage during long-term systemic treatment. Phototherapy is an emerging antibiotic-free strategy to treat these diseases. Upon light irradiation, phototherapeutic agents can generate cytotoxic reactive oxygen species (ROS) or induce a temperature increase, which leads to the death of targeted cells. These two kinds of killing strategies are referred to as photodynamic therapy (PDT) and photothermal therapy (PTT), respectively. So far, many photo-responsive agents have been developed. Among them, the metal-organic framework (MOF) is becoming one of the most promising photo-responsive materials because its structure and chemical compositions can be easily modulated to achieve specific functions. MOFs can have intrinsic photodynamic or photothermal ability under the rational design of MOF construction, or serve as the carrier of therapeutic agents, owing to its tunable porosity. MOFs also provide feasibility for various combined therapies and targeting methods, which improves the efficiency of phototherapy. In this review, we firstly investigated the principles of phototherapy, and comprehensively summarized recent advances of MOF in PDT, PTT and synergistic therapy, from construction to modification. We expect that our demonstration will shed light on the future development of this field, and bring it one step closer to clinical trials.

Visible-light driven rapid bacterial inactivation on red phosphorus/titanium oxide nanofiber heterostructures

Photocatalytic water disinfection has emerged as a promising approach for water purification. However, exploring efficient and rapid visible light driven materials for photocatalytic bacterial inactivation is still a challenging problem. Herein, red phosphorus/titanium oxide (TiO₂@RP) nanofibers were developed for effective water disinfection by a vacuum ampoule strategy. The complete E. coli and S. aureus (7-log CFU mL^-1) could be rapidly killed within 25 min and 30 min over the optimized TiO₂@RP heterostructure under the white LED irradiation. The efficient photocatalytic antibacterial activity should be mainly ascribed to the synergetic enhancement in light absorption by RP decoration and charge migration and separation by the interface between TiO₂ and RP. And then more unpaired photo-carriers would be transferred to the surface to facilitate the generation of photo-holes, •O₂^- radicals, and H₂O₂ species, which could destroy the bacterial cells efficiently.

Novel green synthesis of S-doped TiO2 nanoparticles using Malva parviflora plant extract and their photocatalytic, antimicrobial and antioxidant activities under sunlight illumination

Visible-light-responsible S-doped TiO₂(GST) nanoparticles (NPs) are synthesized via sol-gel process, and an aqueous extract of Malva parviflora (MP) plant is used as the green and versatile medium with excellent reducing and capping properties to facilitate the S-doping and crystal growth of anatase. Compared with the counterpart (CST) derived from the conventional organic solvent. GST show a smaller average particle size (20.3 vs. 29.5 nm) with a larger surface area (135 vs 95 m²/g), together with the more significant red shift to longer wavelength in the visible light region. XPS analysis shows Ti⁴⁺ cations are substituted by S⁶⁺ ions into the lattice structure of TiO₂ for both samples. The photodynamics of CST and GST catalysts are examined by electron paramagnetic resonance (EPR) spectroscopy, which shows the surface Ti³⁺ sites can be oxidized easily by the surface adsorbed O₂ molecules, forming O^2- radicals. Their photocatalytic activities (PCA) are evaluated by degrading methyl orange (MO) dye under the visible light irradiation. GST exhibit higher PCA in MO bleaching and chemical oxygen demand (COD) reduction. In addition, antimicrobial and antioxidant assays of CST and GST NPs also show that the irradiated NPs samples show higher antibacterial activities. GST NPs have a higher antibacterial activity than CST NPs against all tested bacteria and the minimum inhibitory concentration (MIC) is optimized to 25 μg/mL. The in-vitro antioxidant activity evaluated by the radical cation de-colorization test using 1,1-diphenyl-2-picrylhydrazyl (DPPH) further demonstrates that GST NPs give a better antioxidant activity.

Polymyxin B-functionalized phthalocyanine for chemo-photodynamic antibacterial therapy in enhanced wound healing

The rapid healing of bacteria-infected wounds was achieved via synergistic photodynamic antimicrobial therapy and chemotherapy using polymyxin B-functionalized phthalocyanine.

Photocatalytic TiO2-Based Nanostructured Materials for Microbial Inactivation

Pathogenic microorganisms can spread throughout the world population, as the current COVID-19 pandemic has dramatically demonstrated. In this scenario, a protection against pathogens and other microorganisms can come from the use of photoactive materials as antimicrobial agents able to hinder, or at least limit, their spreading by means of photocatalytically assisted processes activated by light—possibly sunlight—promoting the formation of reactive oxygen species (ROS) that can kill microorganisms in different matrices such as water or different surfaces without affecting human health. In this review, we focus the attention on TiO2 nanoparticle-based antimicrobial materials, intending to provide an overview of the most promising synthetic techniques, toward possible large-scale production, critically review the capability of such materials to promote pathogen (i.e., bacteria, virus, and fungi) inactivation, and, finally, take a look at selected technological applications.

Ag3PO4 decorated black urchin-like defective TiO2 for rapid and long-term bacteria-killing under visible light

Both phototherapy via photocatalysts and physical puncture by artificial nanostructures are promising substitutes for antibiotics when treating drug-resistant bacterial infectious diseases. However, the photodynamic therapeutic efficacy of photocatalysts is seriously restricted by the rapid recombination of photogenerated electron–hole pairs. Meanwhile, the nanostructures of physical puncture are limited to two-dimensional (2D) platforms, and they cannot be fully used yet. Thus, this research developed a synergistic system of Ag₃PO₄ nanoparticles (NPs), decorated with black urchin-like defective TiO₂ (BU–TiO_2-X/Ag₃PO₄). These NPs had a decreased bandgap compared to BU-TiO_2-X, and BU-TiO_2-X/Ag₃PO₄ (3:1) exhibited the lowest bandgap and the highest separation efficiency for photogenerated electron–hole pairs. After combination with BU-TiO_2-X, the photostability of Ag₃PO₄ improved because the oxygen vacancy of BU-TiO_2-X retards the reduction of Ag⁺ in Ag₃PO₄ into Ag⁰, thus reducing its toxicity. In addition, the nanospikes on the surface of BU-TiO_2-X can, from all directions, physically puncture bacterial cells, thus assisting the hybrid's photodynamic therapeutic effects, alongside the small amount of Ag⁺ released from Ag₃PO₄. This achieves synergy, endowing the hybrid with high antibacterial efficacy of 99.76 ± 0.15% and 99.85 ± 0.09% against Escherichia coli and Staphylococcus aureus, respectively, after light irradiation for 20 min followed by darkness for 12 h. It is anticipated that these findings may bring new insight for developing synergistic treatment strategies against bacterial infectious diseases or pathogenic bacterial polluted environments.

•

BU-TiO_2-X/Ag₃PO₄ (3:1) hybrid improved the photostability of Ag₃PO₄.

•

BU-TiO_2-X/Ag₃PO₄ (3:1) hybrid exhibited outstanding photodynamic therapeutic effects.

•

The nanospikes from all directions on the BU-TiO_2-X physically punctured bacterial cells.

•

The physical puncture combined with the Ag⁺ released by Ag₃PO₄ had long-term bacteriostatic efficacy.

WITHDRAWN: Fabrication of erbium and nitrogen modified TiO2/diatomaceous earth as a sunlight-driven floating photocatalyst for ibuprofen mitigation

This article has been withdrawn at the request of the authors. Zhaohong Zhang is listed as an author on the manuscript but has informed the journal that this occurred without their consent or knowledge of the submission, and the email address provided was fake. Zhaohong Zhang does not support the scientific conclusions of the article. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at https://www.elsevier.com/about/our-business/policies/article-withdrawal.

Antibacterial Hybrid Hydrogels

Bacterial infectious diseases and bacterial-infected environments have been threatening the health of human beings all over the world. In view of the increased bacteria resistance caused by overuse or improper use of antibiotics, antibacterial biomaterials are developed as the substitutes for antibiotics in some cases. Among them, antibacterial hydrogels are attracting more and more attention due to easy preparation process and diversity of structures by changing their chemical cross-linkers via covalent bonds or noncovalent physical interactions, which can endow them with various specific functions such as high toughness and stretchability, injectability, self-healing, tissue adhesiveness and rapid hemostasis, easy loading and controlled drug release, superior biocompatibility and antioxidation as well as good conductivity. In this review, the recent progress of antibacterial hydrogel including the fabrication methodologies, interior structures, performances, antibacterial mechanisms, and applications of various antibacterial hydrogels is summarized. According to the bacteria-killing modes of hydrogels, several representative hydrogels such as silver nanoparticles-based hydrogel, photoresponsive hydrogel including photothermal and photocatalytic, self-bacteria-killing hydrogel such as inherent antibacterial peptides and cationic polymers, and antibiotics-loading hydrogel are focused on. Furthermore, current challenges of antibacterial hydrogels are discussed and future perspectives in this field are also proposed.

Sunlight-Operated TiO2-Based Photocatalysts

Photo-catalysis is a research field with broad applications in terms of potential technological applications related to energy production and managing, environmental protection, and chemical synthesis fields. A global goal, common to all of these fields, is to generate photo-catalytic materials able to use a renewable energy source such as the sun. As most active photocatalysts such as titanium oxides are essentially UV absorbers, they need to be upgraded in order to achieve the fruitful use of the whole solar spectrum, from UV to infrared wavelengths. A lot of different strategies have been pursued to reach this goal. Here, we selected representative examples of the most successful ones. We mainly highlighted doping and composite systems as those with higher potential in this quest. For each of these two approaches, we highlight the different possibilities explored in the literature. For doping of the main photocatalysts, we consider the use of metal and non-metals oriented to modify the band gap energy as well as to create specific localized electronic states. We also described selected cases of using up-conversion doping cations. For composite systems, we described the use of binary and ternary systems. In addition to a main photo-catalyst, these systems contain low band gap, up-conversion or plasmonic semiconductors, plasmonic and non-plasmonic metals and polymers.

Near-Infrared Light Triggered Phototherapy and Immunotherapy for Elimination of Methicillin-Resistant Staphylococcus aureus Biofilm Infection on Bone Implant

Clinically, methicillin-resistant Staphylococcus aureus (MRSA) biofilm infection inevitably induces the failure of bone implants. Herein, a hydrophilic and viscous hydrogel of poly(vinyl alcohol) modified with chitosan, polydopamine, and NO release donor was formed on a red phosphorus nanofilm deposited on a titanium implant (Ti-RP/PCP/RSNO). Under the irradiation of near-infrared light (NIR), peroxynitrite (^•ONOO^-) was formed by the reaction between the released NO and superoxide (^•O₂^-) produced by the RP nanofilm. Specifically, we revealed the antibacterial mechanism of the ONOO^- against the MRSA biofilm. In addition, osteogenic differentiation was promoted and inflammatory polarization was regulated by the released NO without NIR irradiation through upregulating the expression of Opn and Ocn genes and TNF-α. The MRSA biofilm was synergistically eradicated by ^•ONOO^-, hyperthermia, and ^•O^2- under NIR irradiation as well as the immunoreaction of the M1 polarization. The in vivo results also confirmed the excellent osteogenesis and biofilm eradication by released NO from the RP/PCP/RSNO system under NIR irradiation, indicating the noninvasive tissue reconstruction of MRSA-infected tissues through phototherapy and immunotherapy.

The rapid photoresponsive bacteria-killing of Cu-doped MoS2

This material of Cu doped MoS₂ can produce reactive oxygen species and photothermal under 660 nm light, thus achieving a rapid bacterial effect. Which is a kind of good photothermal and photodynamic material.