High proportion strontium-doped micro-arc oxidation coatings enhance early osseointegration of titanium in osteoporosis by anti-oxidative stress pathway

A multifunctional nanogel encapsulating layered double hydroxide for enhanced osteoarthritis treatment via protection of chondrocytes and ECM

Osteoarthritis (OA) is characterized by progressive and irreversible damage to the articular cartilage and a consecutive inflammatory response. However, the majority of clinical drugs for OA treatment only alleviate symptoms without addressing the fundamental pathology. To mitigate this issue, we developed an inflammation-responsive carrier and encapsulated bioactive material, namely, LDH@TAGel. The LDH@TAGel was designed with anti-inflammatory and antioxidative abilities, aiming to directly address the pathology of cartilage damage. In particular, LDH was confirmed to restore the ECM secretion function of damaged chondrocytes and attenuate the expression of catabolic matrix metalloproteinases (Mmps). While TAGel showed antioxidant properties by scavenging ROS directly. In vitro evaluation revealed that the LDH@TAGel could protect chondrocytes from inflammation-induced oxidative stress and apoptosis via the Nrf2/Keap1 system and Pi3k-Akt pathway. In vivo experiments demonstrated that the LDH@TAGel could alleviated the degeneration and degradation of cartilage induced by anterior cruciate ligament transection (ACLT). The OARSI scores indicating OA severity decreased significantly after three weeks of intervention. Moreover, the IVIS image revealed that LDH@TAGel enhances the controlled release of LDH in a manner that can be customized according to the severity of OA, allowing adaptive, precise treatment. In summary, this novel design effectively alleviates the underlying pathological causes of OA-related cartilage damage and has emerged as a promising biomaterial for adaptive, cause-targeted OA therapies.

Cell-homing and immunomodulatory composite hydrogels for effective wound healing with neovascularization

Wound healing in cases of excessive inflammation poses a significant challenge due to compromised neovascularization. Here, we propose a multi-functional composite hydrogel engineered to overcome such conditions through recruitment and activation of macrophages with adapted degradation of the hydrogel. The composite hydrogel (G-TSrP) is created by combining gelatin methacryloyl (GelMA) and nanoparticles (TSrP) composed of tannic acid (TA) and Sr2+. These nanoparticles are prepared using a one-step mineralization process assisted by metal-phenolic network formation. G-TSrP exhibits the ability to eliminate reactive oxygen species and direct polarization of macrophages toward M2 phenotype. It has been observed that the liberation of TA and Sr2+ from G-TSrP actively facilitate the recruitment and up-regulation of the expression of extracellular matrix remodeling genes of macrophages, and thereby, coordinate in vivo adapted degradation of the G-TSrP. Most significantly, G-TSrP accelerates angiogenesis despite the TA's inhibitory properties, which are counteracted by the released Sr2+. Moreover, G-TSrP enhances wound closure under inflammation and promotes normal tissue formation with strong vessel growth. Genetic analysis confirms macrophage-mediated wound healing by the composite hydrogel. Collectively, these findings pave the way for the development of biomaterials that promote wound healing by creating regenerative environment.

Corrosion and Biological Behaviors of Biomedical Ti-24Nb-4Zr-8Sn Alloy under an Oxidative Stress Microenvironment

Biomaterials can induce an inflammatory response in surrounding tissues after implantation, generating and releasing reactive oxygen species (ROS), such as hydrogen peroxide (H2O2). The excessive accumulation of ROS may create a microenvironment with high levels of oxidative stress (OS), which subsequently accelerates the degradation of the passive film on the surface of titanium (Ti) alloys and affects their biological activity. The immunomodulatory role of macrophages in biomaterial osteogenesis under OS is unknown. This study aimed to explore the corrosion behavior and bone formation of Ti implants under an OS microenvironment. In this study, the corrosion resistance and osteoinduction capabilities in normal and OS conditions of the Ti-24Nb-4Zr-8Sn (wt %, Ti2448) were assessed. Electrochemical impedance spectroscopy analysis indicated that the Ti2448 alloy exhibited superior corrosion resistance on exposure to excessive ROS compared to the Ti-6Al-4V (TC4) alloy. This can be attributed to the formation of the TiO2 and Nb2O5 passive films, which mitigated the adverse effects of OS. In vitro MC3T3-E1 cell experiments revealed that the Ti2448 alloy exhibited good biocompatibility in the OS microenvironment, whereas the osteogenic differentiation level was comparable to that of the TC4 alloy. The Ti2448 alloy significantly alleviates intercellular ROS levels, inducing a higher proportion of M2 phenotypes (52.7%) under OS. Ti2448 alloy significantly promoted the expression of the anti-inflammatory cytokine, interleukin 10 (IL-10), and osteoblast-related cytokines, bone morphogenetic protein 2 (BMP-2), which relatively increased by 26.9 and 31.4%, respectively, compared to TC4 alloy. The Ti2448 alloy provides a favorable osteoimmune environment and significantly promotes the proliferation and differentiation of osteoblasts in vitro compared to the TC4 alloy. Ultimately, the Ti2448 alloy demonstrated excellent corrosion resistance and immunomodulatory properties in an OS microenvironment, providing valuable insights into potential clinical applications as implants to repair bone tissue defects.

Influence of Ultrasound on the Characteristics of CaP Coatings Generated Via the Micro-arc Oxidation Process in Relation to Biomedical Engineering

Over the past decade, bone tissue engineering has been at the core of attention because of an increasing number of implant surgeries. The purpose of this study was to obtain coatings on titanium (Ti) implants with improved properties in terms of biomedical applications and to investigate the effect of ultrasound (US) on these properties during the micro-arc oxidation (MAO) process. The influence of various process parameters, such as time and current density, as well as US mode, on the properties of such coatings was evaluated. Novel porous calcium-phosphate-based coatings were obtained on commercially pure Ti. Their microstructure, chemical composition, topography, wettability, nanomechanical properties, thickness, adhesion to the substrate, and corrosion resistance were analyzed. In addition, cytocompatibility evaluation was checked with the human osteoblasts. The properties of the coatings varied significantly, depending on applied process parameters. The US application during the MAO process contributes to the increase of coating thickness, porosity, roughness, and skewness, as well as augmented calcium incorporation. The most advantageous coating was obtained at a current of 136 mA, time 450 s, and unipolar rectangular US, as it exhibits high porosity, adequate wettability, and beneficial skewness, which enabled increased adhesion and proliferation of osteoblasts during in vitro studies. Finally, the conducted research demonstrated the influence of various UMAO process parameters, which allowed for the selection of appropriate Ti implant modification for specific biomedical utilization.

Janus Membrane with Intrafibrillarly Strontium-Apatite-Mineralized Collagen for Guided Bone Regeneration

Commercial collagen membranes face difficulty in guided bone regeneration (GBR) due to the absence of hierarchical structural design, effective interface management, and diverse bioactivity. Herein, a Janus membrane called SrJM is developed that consists of a porous collagen face to enhance osteogenic function and a dense face to maintain barrier function. Specifically, biomimetic intrafibrillar mineralization of collagen with strontium apatite is realized by liquid precursors of amorphous strontium phosphate. Polycaprolactone methacryloyl is further integrated on one side of the collagen as a dense face, which endows SrJM with mechanical support and a prolonged lifespan. In vitro experiments demonstrate that the dense face of SrJM acts as a strong barrier against fibroblasts, while the porous face significantly promotes cell adhesion and osteogenic differentiation through activation of calcium-sensitive receptor/integrin/Wnt signaling pathways. Meanwhile, SrJM effectively enhances osteogenesis and angiogenesis by recruiting stem cells and modulating osteoimmune response, thus creating an ideal microenvironment for bone regeneration. In vivo studies verify that the bone defect region guided by SrJM is completely repaired by newly formed vascularized bone. Overall, the outstanding performance of SrJM supports its ongoing development as a multifunctional GBR membrane, and this study provides a versatile strategy of fabricating collagen-based biomaterials for hard tissue regeneration.

Advancements in incorporating metal ions onto the surface of biomedical titanium and its alloys via micro-arc oxidation: a research review

The incorporation of biologically active metallic elements into nano/micron-scale coatings through micro-arc oxidation (MAO) shows significant potential in enhancing the biological characteristics and functionality of titanium-based materials. By introducing diverse metal ions onto titanium implant surfaces, not only can their antibacterial, anti-inflammatory and corrosion resistance properties be heightened, but it also promotes vascular growth and facilitates the formation of new bone tissue. This review provides a thorough examination of recent advancements in this field, covering the characteristics of commonly used metal ions and their associated preparation parameters. It also highlights the diverse applications of specific metal ions in enhancing osteogenesis, angiogenesis, antibacterial efficacy, anti-inflammatory and corrosion resistance properties of titanium implants. Furthermore, the review discusses challenges faced and future prospects in this promising area of research. In conclusion, the synergistic approach of micro-arc oxidation and metal ion doping demonstrates substantial promise in advancing the effectiveness of biomedical titanium and its alloys, promising improved outcomes in medical implant applications.

Evaluation of sustained drug release performance and osteoinduction of magnetron-sputtered tantalum-coated titanium dioxide nanotubes

Modifying the drug-release capacity of titanium implants is essential for maintaining their long-term functioning. Titanium dioxide nanotube (TNT) arrays, owing to their drug release capacity, are commonly used in the biomaterial sphere. Their unique half open structure and arrangement in rows increase the drug release capacity. However, their rapid drug release ability not only reduces drug efficiency but also produces excessive local and systemic deposition of antibiotics. In this study, we designed a tantalum-coated TNT system for drug-release optimization. A decreased nanotube size caused by the tantalum nanocoating was observed through SEM and analyzed (TNT: 110 nm, TNT-Ta1: 80 nm, TNT-Ta3: 40 nm, TNT-Ta5: 20 nm, TNT-Ta7: <5 nm). XPS analysis revealed the distribution of the chemical components, especially that of the tantalum element. In vitro experiments showed that the tantalum nanocoating enhanced cell proliferation; in particular, TNT-Ta5 possessed the best cell viability (about 1.18 of TNT groups at 7d). It also showed that the tantalum nanocoating had a positive effect on osteogenesis (especially TNT-Ta5 and TNT-Ta7). Additionally, hydrophilic/hydrophobic drug (vancomycin/raloxifene) release results indicated that the TNT-Ta5 group possessed the most desirable sustained release capacity. Moreover, in this drug release system, the hydrophobic drug showed more sustained release capacity than the hydrophilic drug (vancomycin: sustained release for more than 48 h, raloxifene: sustained release for more than 168 h). More importantly, TNT-Ta5 is proved to be an appropriate drug release system, which possesses cytocompatibility, osteogenic capacity, and sustained drug release capacity.

An Injectable Thermosensitive Hydrogel Containing Resveratrol and Dexamethasone-Loaded Carbonated Hydroxyapatite Microspheres for the Regeneration of Osteoporotic Bone Defects

Bone defects in osteoporosis usually present excessive reactive oxygen species (ROS), abnormal inflammation levels, irregular shapes and impaired bone regeneration ability; therefore, osteoporotic bone defects are difficult to repair. In this study, an injectable thermosensitive hydrogel poly (D, L-lactide)-poly (ethylene glycol)- poly (D, L-lactide) (PLEL) system containing resveratrol (Res) and dexamethasone (DEX) is designed to create a microenvironment conducive to osteogenesis in osteoporotic bone defects. This PLEL hydrogel is injected and filled irregular defect areas and achieving a rapid sol-gel transition in situ. Res has a strong anti-inflammatory effects that can effectively remove excess free radicals at the damaged site, guide macrophage polarization to the M2 phenotype, and regulate immune responses. Additionally, DEX can promote osteogenic differentiation. In vitro experiments showed that the hydrogel effectively promoted osteogenic differentiation of mesenchymal stem cells, removed excess intracellular ROS, and regulated macrophage polarization to reduce inflammatory responses. In vivo experiments showed that the hydrogel promoted osteoporotic bone defect regeneration and modulated immune responses. Overall, this study confirmed that the hydrogel can treat osteoporotic bone defects by synergistically modulating bone damage microenvironment, alleviating inflammatory responses, and promoting osteogenesis; thus, it represents a promising drug delivery strategy to repair osteoporotic bone defects.

Electrochemical Deposition of Copper on Bioactive Porous Titanium Dioxide Layer: Antibacterial and Pro-Osteogenic Activities

Ti surfaces must exhibit antibacterial activity without cytotoxicity to promote bone reconstruction and prevent infection simultaneously. In this study, we employed a two-step electrochemical treatment process, namely, microarc oxidation (MAO) and cathodic electrochemical deposition (CED), to modify Ti surfaces. During the MAO step, a porous TiO2 (pTiO2) layer with a surface roughness of approximately 2.0 μm was generated on the Ti surface, and in the CED step, Cu was deposited onto the pTiO2 layer on the Ti surface, forming Cu@pTiO2. Cu@pTiO2 exhibited a similar structure, adhesion strength, and crystal phase to pTiO2. Moreover, X-ray photoelectron spectroscopy (XPS) confirmed the presence of Cu in Cu@pTiO2 at an approximate concentration of 1.0 atom %. Cu@pTiO2 demonstrated a sustained release of Cu ions for a minimum of 28 days in a simulated in vivo environment. In vitro experiments revealed that Cu@pTiO2 effectively eradicated approximately 99% of Staphylococcus aureus and Escherichia coli and inhibited biofilm formation, in contrast to the Ti and pTiO2 surfaces. Moreover, Cu@pTiO2 supported the proliferation of osteoblast-like cells at a rate comparable to that observed on the Ti and pTiO2 surfaces. Similar to pTiO2, Cu@pTiO2 promoted the calcification of osteoblast-like cells compared with Ti. In summary, we successfully conferred antibacterial and pro-osteogenic activities to Ti surfaces without inducing cytotoxic effects or structural and mechanical alterations in pTiO2 through the application of MAO and CED processes. Moreover, we found that the pTiO2 layer promoted bacterial growth and biofilm formation more effectively than the Ti surface, highlighting the potential drawbacks of rough and porous surfaces. Our findings provide fundamental insights into the surface design of Ti-based medical devices for bone reconstruction and infection prevention.

Micro-arc oxidation (MAO) and its potential for improving the performance of titanium implants in biomedical applications

Titanium (Ti) and its alloys have good biocompatibility, mechanical properties and corrosion resistance, making them attractive for biomedical applications. However, their biological inertness and lack of antimicrobial properties may compromise the success of implants. In this review, the potential of micro-arc oxidation (MAO) technology to create bioactive coatings on Ti implants is discussed. The review covers the following aspects: 1) different factors, such as electrolyte, voltage and current, affect the properties of MAO coatings; 2) MAO coatings affect biocompatibility, including cytocompatibility, hemocompatibility, angiogenic activity, corrosion resistance, osteogenic activity and osseointegration; 3) antibacterial properties can be achieved by adding copper (Cu), silver (Ag), zinc (Zn) and other elements to achieve antimicrobial properties; and 4) MAO can be combined with other physical and chemical techniques to enhance the performance of MAO coatings. It is concluded that MAO coatings offer new opportunities for improving the use of Ti and its alloys in biomedical applications, and some suggestions for future research are provided.

Reactive Oxygen Species Scavenging Hydrogel Regulates Stem Cell Behavior and Promotes Bone Healing in Osteoporosis

BACKGROUND

Implantation of bone marrow mesenchymal stem cells (BMSCs) is a potential alternative for promoting bone defects healing or osseointegration in osteoporosis. However, the reactive oxygen species (ROS) accumulated and excessive inflammation in the osteoporotic microenvironment could weaken the self-replication and multi-directional differentiation of transplanted BMSCs.

METHODS

In this study, to improve the hostile microenvironment in osteoporosis, Poloxamer 407 and hyaluronic acid (HA) was crosslinked to synthetize a thermos-responsive and injectable hydrogel to load MnO2 nanoparticles as a protective carrier (MnO2@Pol/HA hydrogel) for delivering BMSCs.

RESULTS

The resulting MnO2@Pol/HA hydrogel processed excellent biocompatibility and durable retention time, and can eliminate accumulated ROS effectively, thereby protecting BMSCs from ROS-mediated inhibition of cell viability, including survival, proliferation, and osteogenic differentiation. In osteoporotic bone defects, implanting of this BMSCs incorporated MnO2@Pol/HA hydrogel significantly eliminated ROS level in bone marrow and bone tissue, induced macrophages polarization from M1 to M2 phenotype, decreased the expression of pro-inflammatory cytokines (e.g., TNF-α, IL-1β, and IL-6) and osteogenic related factors (e.g., TGF-β and PDGF).

CONCLUSION

This hydrogel-based BMSCs protected delivery strategy indicated better bone repair effect than BMSCs delivering or MnO2@Pol/HA hydrogel implantation singly, which providing a potential alternative strategy for enhancing osteoporotic bone defects healing.

Human Osteoblasts' Response to Biomaterials for Subchondral Bone Regeneration in Standard and Aggressive Environments

Osteochondral lesions, when not properly treated, may evolve into osteoarthritis (OA), especially in the elderly population, where altered joint function and quality are usual. To date, a collagen/collagen-magnesium-hydroxyapatite (Col/Col-Mg-HAp) scaffold (OC) has demonstrated good clinical results, although suboptimal subchondral bone regeneration still limits its efficacy. This study was aimed at evaluating the in vitro osteogenic potential of this scaffold, functionalized with two different strategies: the addition of Bone Morphogenetic Protein-2 (BMP-2) and the incorporation of strontium (Sr)-ion-enriched amorphous calcium phosphate (Sr-ACP) granules. Human osteoblasts were seeded on the functionalized scaffolds (OC+BMP-2 and OC+Sr-ACP, compared to OC) under stress conditions reproduced with the addition of H2O2 to the culture system, as well as in normal conditions, and evaluated in terms of morphology, metabolic activity, gene expression, and matrix synthesis. The OC+BMP-2 scaffold supported a better osteoblast morphology and stimulated scaffold colonization, cell activity, and extracellular matrix secretion, especially in the stressed culture environment but also in normal culture conditions, with increased expression of genes related to osteoblast differentiation. In conclusion, the incorporation of BMP-2 into the Col/Col-Mg-HAp scaffold also represents an improvement of the osteochondral scaffold in more challenging conditions, supporting further preclinical studies to optimize it for use in clinical practice.

Advanced applications of strontium-containing biomaterials in bone tissue engineering

Strontium (Sr) and strontium ranelate (SR) are commonly used therapeutic drugs for patients suffering from osteoporosis. Researches have showed that Sr can significantly improve the biological activity and physicochemical properties of materials in vitro and in vivo. Therefore, a large number of strontium containing biomaterials have been developed for repairing bone defects and promoting osseointegration. In this review, we provide a comprehensive overview of Sr-containing biomaterials along with the current state of their clinical use. For this purpose, the different types of biomaterials including calcium phosphate, bioactive glass, and polymers are discussed and provided future outlook on the fabrication of the next-generation multifunctional and smart biomaterials.

The effect of strontium content on physicochemical and osteogenic property of Sr/Ag-containing TiO2 microporous coatings

Strontium (Sr) is the most common element introduced into TiO₂ coatings to strengthen the osteogenic property of titanium implants. However, the optimal Sr content and its effect on osteogenic and physicochemical properties of the coatings need to be clarified. In the current study, TiO₂ microporous coatings with different contents of Sr (9.64-21.25 wt %) and silver (Ag) (0.38-0.75 wt %) were prepared via micro-arc oxidation technique. Sr contents did not change physicochemical properties of the coatings, including surface microstructure, micropore size and distribution, phase composition, roughness and hydrophilicity. Meanwhile, higher Sr contents (18.23-21.25 wt %) improved cytocompatibility, proliferation and alkaline phosphatase (ALP) activity of preosteoblasts, even the coatings underwent 30 days' PBS immersion. Furthermore, higher Sr contents facilitated preosteoblast growth and spreading, which are essential for their proliferation and osteogenic differentiation. Therefore, it is promising to incorporate higher Sr content (18.23-21.25 wt %) within TiO₂ microporous coatings to improve their osteogenic capability.

Effects of saponins isolated from Polygonatum sibiricum on H2O2-induced oxidative damage in RIN-m5F cells and its protective effect on pancreas

The damage of islet cells caused by oxidative stress is closely related to diabetes. The aim of this study is to investigate the protective effect of saponins isolated from polygonatum sibiricum (PSS) on pancreas injury by using in vitro and in vivo models. The oxidative stress model of RIN-m5F cells induced by H₂O₂ was established. We found that PSS could decrease the apoptosis of RIN-m5F cells under oxidative stress. After PSS treatment, ROS and MDA levels in cells significantly decreased. Moreover, the levels of SOD and GSH were significantly increased. PSS could increase the insulin secretion level of cells under oxidative stress. The expression level of intracellular Bcl-2 increased, and the expression levels of Bax, caspase-3, caspase-8, and caspase-9 decreased significantly. In addition, the type 2 diabetes mouse model was established. The results showed that PSS had a protective effect on the injury of the pancreas in T2DM mice. PSS can relieve oxidative stress and high glucose-mediated pancreas cytotoxicity. PSS may be a promising candidate for diabetes intervention and functional foods.

Osteogenic and long-term antibacterial properties of Sr/Ag-containing TiO2 microporous coating in vitro and in vivo

Bacterial infection and poor osseointegration are two critical issues that need to be solved for long-term use of titanium implants. As such, Sr/Ag-containing TiO₂ microporous coatings were prepared on a Ti alloy surface in the current study via a single-step microarc oxidation technique. The coatings showed both good cytocompatibility in vitro and biosafety in vivo. Sr/Ag incorporation brought no significant change in the surface micromorphology and physicochemical properties, but endowed the coating with strong osteogenic activity and long-term antibacterial capability in vitro. Furthermore, the osteogenic and antibacterial capability of the coating was also confirmed in vivo. In a rat osseointegration model, new bone formation, implant-bone contact, removal torque and bone mineralization were all significantly increased in the M-Sr/Ag group when compared with those in group M, although they were slightly lower than those in group M-Sr. In a periimplantitis model, no rats suffered infection in the M-Sr/Ag group after 3 months of osseointegration and 5 weeks of bacterial inoculation period, when compared to 100% and 75% infection rates in M and M-Sr groups, respectively. In addition, active bone remodeling and many mesenchymal cells were observed in the M-Sr group, suggesting good bone regeneration potential in Sr-containing coatings in the case of controlled periimplantitis. Overall, the Sr/Ag-containing TiO₂ microporous coating is valuable for preventing periimplantitis and improving implant reosseointegration, and is therefore promising for long-term and high quality use of titanium implants.

Protective effects of oridonin against osteoporosis by regulating immunity and activating the Wnt3a/β-catenin/VEGF pathway in ovariectomized mice

This study was performed with the aim of investigating the effect of oridonin (ORI) on estrogen deprivation-induced osteoporosis in mice and its mechanism. Animal experiments were used in this work to validate the anti-osteoporotic efficacy of ORI. Morphometric analysis was performed by micro-CT. A special protein meter was used to detect the content of immunoglobulin lgM, immunoglobulin lgG, complement C3 and C4 in the serum of mice. The expression of CD4⁺CD25⁺Foxp3⁺ Treg cell and CD4⁺/CD8⁺ lymphocyte subsets in mice was detected by flow cytometry. ELISA was used to detect the content of insulin-like growth factor (IGF-1), tumor necrosis factor (TNF-α), interleukin-1 (IL-1) and interleukin-6 (IL-6). In addition, key signaling molecules in the Wnt3a/β-catenin signaling pathway were detected by Western blotting. The results showed that compared with the model group, the contents of calcium and phosphorus in the femurs of mice in the ORI groups were increased, and the spleen coefficient was decreased. The ALP activity in the serum of mice in the high and medium dose ORI groups was decreased, and the uterine coefficient was increased. ORI significantly increased the maximum bending load and the maximum bending stress of the femurs of mice, increased the number of trabeculae, and repaired the bone microstructure. At the same time, ORI could significantly increase the levels of immunoglobulin (lgG and lgM) and complement (C3 and C4), increase the activity of peritoneal macrophages in mice, increase the expression of CD4⁺CD25⁺Foxp3⁺ Tregs and CD4⁺/CD8⁺ in the spleen, increase the content of IGF-1, reduce the content of TNF-α, IL-1 and IL-6 and increase the expression levels of VEGF, Wnt3a, p-GSK3β/GSK3β and β-catenin/Lamin in the femoral tissue. These results indicated that ORI might regulate the expression of VEGF through the Wnt3a/β-catenin signaling pathway, improve the immunity of mice, maintain the balance of the immune system, and promote angiogenesis, thereby improving the bone mineral density and bone tissue morphology of mice and playing an anti-osteoporotic role.

The role of mitochondria in the peri-implant microenvironment

NEW FINDINGS

What is the topic of this review? In this review, we consider the key role of mitochondria in the peri-implant milieu, including the regulation of mitochondrial reactive oxygen species and mitochondrial metabolism in angiogenesis, the polarization of macrophage immune responses, and bone formation and bone resorption during osseointegration. What advances does it highlight? Mitochondria contribute to the behaviours of peri-implant cell lines based on metabolic and reactive oxygen species signalling modulations, which will contribute to the research field and the development of new treatment strategies for improving implant success.

ABSTRACT

Osseointegration is a dynamic biological process in the local microenvironment adjacent to a bone implant, which is crucial for implant performance and success of the implant surgery. Recently, the role of mitochondria in the peri-implant microenvironment during osseointegration has gained much attention. Mitochondrial regulation has been verified to be essential for cellular events in osseointegration and as a therapeutic target for peri-implant diseases in the peri-implant microenvironment. In this review, we summarize our current knowledge of the key role of mitochondria in the peri-implant milieu, including the regulation of mitochondrial reactive oxygen species and mitochondrial metabolism in angiogenesis, the polarization of macrophage immune responses, and bone formation and resorption during osseointegration, which will contribute to the research field and the development of new treatment strategies to improve implant success. In addition, we indicate limitations in our current understanding of the regulation of mitochondria in osseointegration and suggest topics for further study.

Advances in materials-based therapeutic strategies against osteoporosis

Osteoporosis is caused by the disruption in homeostasis between bone formation and bone resorption. Conventional management of osteoporosis involves systematic drug administration and hormonal therapy. These treatment strategies have limited curative efficacy and multiple adverse effects. Biomaterials-based therapeutic strategies have recently emerged as promising alternatives for the treatment of osteoporosis. The present review summarizes the current status of biomaterials designed for managing osteoporosis. The advantages of biomaterials-based strategies over conventional systematic drug treatment are presented. Different anti-osteoporotic delivery systems are concisely addressed. These materials include injectable hydrogels and nanoparticles, as well as anti-osteoporotic bone tissue engineering materials. Fabrication techniques such as 3D printing, electrostatic spinning and artificial intelligence are appraised in the context of how the use of these adjunctive techniques may improve treatment efficacy. The limitations of existing biomaterials are critically analyzed, together with deliberation of the future directions in biomaterials-based therapies. The latter include discussion on the use of combination strategies to enhance therapeutic efficacy in the osteoporosis niche.

Multiscale design of stiffening and ROS scavenging hydrogels for the augmentation of mandibular bone regeneration

Although biomimetic hydrogels play an essential role in guiding bone remodeling, reconstructing large bone defects is still a significant challenge since bioinspired gels often lack osteoconductive capacity, robust mechanical properties and suitable antioxidant ability for bone regeneration. To address these challenges, we first engineered molecular design of hydrogels (gelatin/polyethylene glycol diacrylate/2-(dimethylamino)ethyl methacrylate, GPEGD), where their mechanical properties were significantly enhanced via introducing trace amounts of additives (0.5 wt%). The novel hybrid hydrogels show high compressive strength (>700 kPa), stiff modulus (>170 kPa) and strong ROS-scavenging ability. Furthermore, to endow the GPEGD hydrogels excellent osteoinductions, novel biocompatible, antioxidant and BMP-2 loaded polydopamine/heparin nanoparticles (BPDAH) were developed for functionalization of the GPEGD gels (BPDAH-GPEGD). In vitro results indicate that the antioxidant BPDAH-GPEGD is able to deplete elevated ROS levels to protect cells viability against ROS damage. More importantly, the BPDAH-GPEGD hydrogels have good biocompatibility and promote the osteo differentiation of preosteoblasts and bone regenerations. At 4 and 8 weeks after implantation of the hydrogels in a mandibular bone defect, Micro-computed tomography and histology results show greater bone volume and enhancements in the quality and rate of bone regeneration in the BPDAH-GPEGD hydrogels. Thus, the multiscale design of stiffening and ROS scavenging hydrogels could serve as a promising material for bone regeneration applications.

•

Trace additives of DMAEMA markedly enhanced the mechanical performances of the gelatin-based hydrogels through molecular induced multiple crosslinking structures.

•

Molecular design strategy combined with bioactive nanocomposites have a synergistically effects on promoting ROS scavenging ability and osteoactivity of the biomimetic hydrogels.

ROS-scavenging hydrogel as protective carrier to regulate stem cells activity and promote osteointegration of 3D printed porous titanium prosthesis in osteoporosis

Stem cell-based therapy has drawn attention as an alternative option for promoting prosthetic osteointegration in osteoporosis by virtue of its unique characteristics. However, estrogen deficiency is the main mechanism of postmenopausal osteoporosis. Estrogen, as an effective antioxidant, deficienncy also results in the accumulation of reactive oxygen species (ROS) in the body, affecting the osteogenic differentiation of stem cells and the bone formation i osteoporosis. In this study, we prepared a ROS-scavenging hydrogel by crosslinking of epigallocatechin-3-gallate (EGCG), 3-acrylamido phenylboronic acid (APBA) and acrylamide. The engineered hydrogel can scavenge ROS efficiently, enabling it to be a cell carrier of bone marrow-derived mesenchymal stem cells (BMSCs) to protect delivered cells from ROS-mediated death and osteogenesis inhibition, favorably enhancing the tissue repair potential of stem cells. Further in vivo investigations seriously demonstrated that this ROS-scavenging hydrogel encapsulated with BMSCs can prominently promote osteointegration of 3D printed microporous titanium alloy prosthesis in osteoporosis, including scavenging accumulated ROS, inducing macrophages to polarize toward M2 phenotype, suppressing inflammatory cytokines expression, and improving osteogenesis related markers (e.g., ALP, Runx-2, COL-1, BSP, OCN, and OPN). This work provides a novel strategy for conquering the challenge of transplanted stem cells cannot fully function in the impaired microenvironment, and enhancing prosthetic osteointegration in osteoporosis.

Bone regeneration strategies based on organelle homeostasis of mesenchymal stem cells

The organelle modulation has emerged as a crucial contributor to the organismal homeostasis. The mesenchymal stem cells (MSCs), with their putative functions in maintaining the regeneration ability of adult tissues, have been identified as a major driver to underlie skeletal health. Bone is a structural and endocrine organ, in which the organelle regulation on mesenchymal stem cells (MSCs) function has most been discovered recently. Furthermore, potential treatments to control bone regeneration are developing using organelle-targeted techniques based on manipulating MSCs osteogenesis. In this review, we summarize the most current understanding of organelle regulation on MSCs in bone homeostasis, and to outline mechanistic insights as well as organelle-targeted approaches for accelerated bone regeneration.

The race for the optimal antimicrobial surface: perspectives and challenges related to plasma electrolytic oxidation coating for titanium-based implants

Plasma electrolytic oxidation (PEO) is a low-cost, structurally reliable, and environmentally friendly surface modification method for orthopedic and dental implants. This technique is successful for the formation of porous, corrosion-resistant, and bioactive coatings, besides introducing antimicrobial compounds easily. Given the increase in implant-related infections, antimicrobial PEO-treated surfaces have been widely proposed to surmount this public health concern. This review comprehensively discusses antimicrobial implant surfaces currently produced by PEO in terms of their in vitro and in vivo microbiological and biological properties. We present a critical [part I] and evidence-based [part II] review about the plethora of antimicrobial PEO-treated surfaces. The mechanism of microbial accumulation on implanted devices and the principles of PEO technology to ensure antimicrobial functionalization by one- or multi-step processes are outlined. Our systematic literature search showed that particular focus has been placed on the metallic and semi-metallic elements incorporated into PEO surfaces to facilitate antimicrobial properties, which are often dose-dependent, without leading to cytotoxicity in vitro. Meanwhile, there are concerns over the biocompatibility of PEO and its long-term antimicrobial effects in animal models. We clearly highlight the importance of using clinically relevant infection models and in vivo long-term assessments to guarantee the rational design of antimicrobial PEO-treated surfaces to identify the 'finish line' in the race for antimicrobial implant surfaces.

Promotion of bone formation and antibacterial properties of titanium coated with porous Si/Ag-doped titanium dioxide

Implant materials are mainly used to repair and replace defects in human hard tissue (bones and teeth). Titanium (Ti) and Ti alloys are widely used as implant materials because of their good mechanical properties and biocompatibilities, but they do not have the ability to induce new bone formation and have no antibacterial properties. Through surface modification, Ti and its alloys have certain osteogenic and antibacterial properties such that Ti implants can meet clinical needs and ensure integration between Ti implants and bone tissue, and this is currently an active research area. In this study, bioactive Si and Ag were introduced onto a Ti surface by plasma oxidation. The surface morphology, structure, elemental composition and valence, surface roughness, hydrophilicity and other physical and chemical properties of the coating were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), a profiler and a contact angle meter (CA). Adhesion and extensions of osteoblasts on the surface of the material were observed by scanning electron microscopy, and mineralization of osteoblasts on the surface of the material were observed by alizarin red staining. The antibacterial properties of the material were tested by culturing Staphylococcus aureus on the surface of the material. The osteogenic properties of Ti implants with porous Si/Ag TiO₂ (TCP-SA) coatings were evaluated with in vivo experiments in rats. The results showed that Si and Ag were successfully introduced onto the Ti surface by plasma oxidation, and doping with Si and Ag did not change the surface morphology of the coating. The osteoblasts showed good adhesion and extension on the surfaces of Si/Ag coated samples, and the porous Si/Ag TiO₂ coating promoted cell proliferation and mineralization. The bacterial experiments showed that the porous TiO₂ coatings containing Si/Ag had certain antibacterial properties. The animal experiments showed that Si/Ag-coated Ti implants promoted integration between the implants and the surrounding bone. It was concluded that the porous Si/Ag TiO₂ coating on the Ti surface had good osteogenic and antibacterial properties and provides an optimal strategy for improving the osteogenic and antibacterial properties of Ti implants.

Nanocatalytic Biofunctional MOF Coating on Titanium Implants Promotes Osteoporotic Bone Regeneration through Cooperative Pro-osteoblastogenesis MSC Reprogramming

An elevated bone microenvironmental reactive oxygen species (ROS) level is a hallmark of osteoporosis that often leads to the dysfunction of bone-related mesenchymal stem cells (MSCs), which would induce MSC senescence and severely undermine their osteoblastic potential. Herein, we report the in situ construction of bone microenvironment-responsive biofunctional metal-organic framework (bio-MOF) coating on the titanium surface through the coordination between p-xylylenebisphosphonate (PXBP) and Ce/Sr ions by a hydrothermal method. Taking advantage of the anchored Ce and Sr ions, the AHT-Ce/SrMOF implants demonstrate on-demand superoxide dismutase and catalase-like catalytic activities to decompose ROS in MSCs and restore their mitochondrial functions. In vitro analysis showed that the AHT-Ce/SrMOF implants substantially activated the AMP-activated protein kinase (AMPK) signaling pathway in MSCs and reduced the ROS levels. Meanwhile, MSCs grown on AHT-Ce/SrMOF implants displayed significantly higher expressions of the mitochondrial fission marker (DRP1), mitochondrial fusion marker (MFN2 and OPA1), and mitophagy marker (PINK1 and LC3) than those of the AHT-CeMOF and AHT-SrMOF groups, which indicated that the bio-MOF could amend mitochondrial function in MSCs to reverse senescence. In vivo evaluations showed that the bio-MOF-coated Ti implants could restore MSC function in the implant site and promote new bone formation, leading to improved osteointegration in osteoporotic rat. This study may improve implant-mediated fracture healing in the clinics.

Antifouling poly(PEGMA) grafting modified titanium surface reduces osseointegration through resisting adhesion of bone marrow mesenchymal stem cells

As an alternative strategy to achieve the desired bone augmentation, tenting screw technology (TST) has considerably broadened the indications for implant treatment. Titanium tenting screws are typically used in TST to maintain the space for bone regeneration. However, a high degree of osteogenic integration complicate titanium tenting screw removal and impact the bone healing micro-environment. Previous efforts have been focused on modifying titanium surfaces to enhance osseointegration while ignoring the opposite process. Due to the vital role of bone marrow mesenchymal stem cells (BMSCs) in bone regeneration, it might be feasible to reduce osseointegration around titanium tenting screws by resisting the adhesion of BMSCs. Herein, poly(ethylene glycol)methyl ether methacrylate (poly(PEGMA)) with an optimal length of PEG chain was incorporated with a Ti surface in terms of surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET ATRP). The cell apoptosis analysis showed that the new surface would not induce the apoptosis of BMSCs. Then, the adhesive and proliferative behaviors of BMSCs on the surface were analyzed which indicated that the poly(PEGMA) surface could inhibit the proliferation of BMSCs through resisting the adhesion process. Furthermore, in vivo experiments revealed the presence of the poly(PEGMA) on the surface resulted in a lower bone formation and osseointegration compared with the Ti group. Collectively, this dense poly(PEGMA) surface of Ti may serve as a promising material for clinical applications in the future. STATEMENT OF SIGNIFICANCE: The significance of this research includes: The poly(ethylene glycol)methyl ether methacrylate (poly(PEGMA)) with an optimal length of PEG chain was grafted onto a Ti surface by surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET ATRP). The PEGMA surface could reduce the osteogenic integration by preventing the adhesion of cells, resulting in a lower pullout force of the modified implant and thereby desirable and feasible applications in dental surgery.

Strontium Functionalized in Biomaterials for Bone Tissue Engineering: A Prominent Role in Osteoimmunomodulation

With the development of bone tissue engineering bio-scaffold materials by adding metallic ions to improve bone healing have been extensively explored in the past decades. Strontium a non-radioactive element, as an essential osteophilic trace element for the human body, has received widespread attention in the medical field due to its superior biological properties of inhibiting bone resorption and promoting osteogenesis. As the concept of osteoimmunology developed, the design of orthopedic biomaterials has gradually shifted from “immune-friendly” to “immunomodulatory” with the aim of promoting bone healing by modulating the immune microenvironment through implanted biomaterials. The process of bone healing can be regarded as an immune-induced procedure in which immune cells can target the effector cells such as macrophages, neutrophils, osteocytes, and osteoprogenitor cells through paracrine mechanisms, affecting pathological alveolar bone resorption and physiological bone regeneration. As a kind of crucial immune cell, macrophages play a critical role in the early period of wound repair and host defense after biomaterial implantation. Despite Sr-doped biomaterials being increasingly investigated, how extracellular Sr²⁺ guides the organism toward favorable osteogenesis by modulating macrophages in the bone tissue microenvironment has rarely been studied. This review focuses on recent knowledge that the trace element Sr regulates bone regeneration mechanisms through the regulation of macrophage polarization, which is significant for the future development of Sr-doped bone repair materials. We will also summarize the primary mechanism of Sr²⁺ in bone, including calcium-sensing receptor (CaSR) and osteogenesis-related signaling pathways.

Immunomodulation Effect of Biomaterials on Bone Formation

Traditional bone replacement materials have been developed with the goal of directing the osteogenesis of osteoblastic cell lines toward differentiation and therefore achieving biomaterial-mediated osteogenesis, but the osteogenic effect has been disappointing. With advances in bone biology, it has been revealed that the local immune microenvironment has an important role in regulating the bone formation process. According to the bone immunology hypothesis, the immune system and the skeletal system are inextricably linked, with many cytokines and regulatory factors in common, and immune cells play an essential role in bone-related physiopathological processes. This review combines advances in bone immunology with biomaterial immunomodulatory properties to provide an overview of biomaterials-mediated immune responses to regulate bone regeneration, as well as methods to assess the bone immunomodulatory properties of bone biomaterials and how these strategies can be used for future bone tissue engineering applications.